KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
31864 commits 1 branch 0 tags 154 MiB
Commit graph

14370 commits

Author SHA1 Message Date
Felix Fietkau
0a4b20166d ar71xx: Increase RXD/RDV to 2 on OM5P-AN 
It was reported that OM5P-AN needs not only a delay setting of 1 for RXD/RDV
but 2. These was found when testing with a NetGear GS752TP POE switch with a
cable length of 50ft and 250ft.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 45524
 2015-04-20 15:01:00 +00:00
Felix Fietkau
f4e6418a32 ar71xx: add a helper function to set RXDV/RXD of ETH_CFG on AR934x 
The ETH_RXDV_DELAY (17:16) and ETH_RXD_DELAY (15:14) are currently not cleared
by the function ath79_setup_ar934x_eth_cfg. Clearing these in the
ath79_setup_ar934x_eth_cfg may cause problems on some hardware because they
rely on the preset value by the bootloader.

Instead another function is introduced which also works on ETH_CFG on AR934x.
It can be used to safely clear and set ETH_RXDV_DELAY and ETH_RXD_DELAY on
machines which require special settings.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 45523
 2015-04-20 15:00:52 +00:00
Felix Fietkau
c75a0e86b1 ar71xx: add mask and shift for RXD/RDV bits in AR934X register file 
The commit r38948 ("ag71xx: add F1E specific feature bit definitions to AR934X
register file") introduced definitions for some bits in the RDV/RXD part of the
ETH_CFG register of AR934x. These are incomplete because ETH_RXDV_DELAY is
specified as 17:16 and ETH_RXD_DELAY is specified 15:14. The original commit
only specified the lower bits. The upper bits also have to be unset when the
lower bits should only be set.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 45522
 2015-04-20 15:00:41 +00:00
Felix Fietkau
5c6925a23b ar71xx: Remove TX/RX delay from pll_1000 for OM5P-AN 
The tx/rx delay bits in the ETH_XMII_CONTROL register have to be unset when the
enable_rgmii_rx_delay/enable_rgmii_tx_delay will be set in the AT803x PHY.
Othwise the throughput in gigabit mode is heavily reduced.

Signed-off-by: Sven Eckelmann <sven@open-mesh.org>

SVN-Revision: 45521
 2015-04-20 15:00:20 +00:00
Jo-Philipp Wich
0ee9504911 all: replace genext2fs with make_ext4fs 
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 45517
 2015-04-20 13:57:43 +00:00
Felix Fietkau
610ce30c3a Revert "ar71xx/image: move TPLINK-LZMA image to new build code" (r45490) 
Profile definitions need to be checked and fixed before this patch can
be applied again.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45511
 2015-04-19 19:19:12 +00:00
Felix Fietkau
d808d9be86 ramips: switch WSR-1166 and WSR-600 to single-firmware mtd layout 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45507
 2015-04-19 16:31:54 +00:00
Jonas Gorski
0dfba24e9a kernel: refresh generic patches 
Refresh patches to remove the trailing whitespaces caused by an old
diffutils version on osx.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45506
 2015-04-19 11:38:46 +00:00
Jonas Gorski
681eb8c3de brcm63xx: fix bcm63268 rgmii port rgmii configuration 
This should rather be done by passing appropriate platform_data/OF, but
should suffice for now.

Fixes e.g. GbE ports on BCM963268BU_P300.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45505
 2015-04-19 11:38:42 +00:00
Jonas Gorski
440124dcbb brcm63xx: allow using all four rgmii ports on bcm6316x 
At least the third rgmii port is available on 63169, so assume all are
available. Simplifies cpu vs. variant handling.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45504
 2015-04-19 11:38:24 +00:00
Jonas Gorski
c1ea714d43 brcm63xx: BCM963268BU_P300 reference board fixes 
- Fix profile name.
- Rremove whitespace on board patch.
- Refresh patches.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45499
 2015-04-18 22:33:50 +00:00
John Crispin
d9ebcce56c ar71xx/image: remove duplicated rootfs in new tplink initramfs images 
The new building code included the rootfs twice when building tplink initramfs images.
To make it more readable move initramfs into an own build step
Build/mktplinkfw-initramfs.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 45491
 2015-04-18 10:19:28 +00:00
John Crispin
09c4b0e8f3 ar71xx/image: move TPLINK-LZMA image to new build code 
There are 2 images missing: TLWR2543 TLWR1043V2 which have special properties

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 45490
 2015-04-18 10:19:23 +00:00
John Crispin
13204f6a35 ar71xx/image: add template tplink-16mlzma 
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 45489
 2015-04-18 10:19:14 +00:00
John Crispin
1efdccc055 ar71xx/image: fix imagesize of template tplink-8mlzma 
The new image size is verified by a running tplink device and checked
against mktplinkfw source code.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 45488
 2015-04-18 10:19:09 +00:00
Jonas Gorski
6232e845da brcm63xx: fix bcm96318ref_p300 profile name 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45486
 2015-04-18 09:34:17 +00:00
Felix Fietkau
c73adc80a3 bcm53xx: add profiling support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45480
 2015-04-17 18:52:15 +00:00
Luka Perkov
22045c383d imx6: put uboot-envtools in DEFAULT_PACKAGES 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45478
 2015-04-17 13:47:13 +00:00
Luka Perkov
cc8628a6a3 kirkwood: put uboot-envtools in DEFAULT_PACKAGES 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45477
 2015-04-17 13:47:09 +00:00
Rafał Miłecki
9c02b23a77 brcm47xx: add buttons support for WRT310N v2 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45474
 2015-04-17 08:12:00 +00:00
Rafał Miłecki
9e03c36259 bcm53xx: fix handling absolute paths in sysupgrade (for vendor formats) 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45473
 2015-04-17 06:03:00 +00:00
Rafał Miłecki
b12e85a451 brcm47xx: fix handling absolute paths in sysupgrade (for vendor formats) 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45472
 2015-04-17 05:45:46 +00:00
Rafał Miłecki
e85294a957 brcm47xx: rework vendor fw handling to don't duplicate upgrade calls 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45470
 2015-04-16 21:43:27 +00:00
Rafał Miłecki
c8eed9a50a brcm47xx: explicitly select CPU_MIPS32_R2 and CPU_MIPSR2 for mips74k 
The mips74k subtarget of brcm47xx configures gcc to compile for mips32r2;
however, the generated kernel config for 3.14 and later kernels ends up
with CPU_MIPS32_R1 and CPU_MIPSR1 selected.  The generated kernel config
for the 3.10 kernel (Barrier Breaker) properly selected CPU_MIPS32_R2 and
CPU_MIPSR2.  Modify the default kernel config for mips74k to explicitly
select CPU_MIPS32_R2 and CPU_MIPSR2.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
Tested-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45469
 2015-04-16 21:20:37 +00:00
Felix Fietkau
582b20c4e2 kernel: accidentally committed a few patches in the wrong place, move them 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45468
 2015-04-16 20:43:11 +00:00
Felix Fietkau
b860db2c63 bcm53xx: add power button for WXR-1900DHP 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45467
 2015-04-16 20:09:55 +00:00
Felix Fietkau
c9aeb21405 bcm53xx: add power button for Buffalo WZR-1750DHP 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45466
 2015-04-16 20:09:48 +00:00
Felix Fietkau
a7f768bdc8 bcm53xx: add USB LED for Buffalo WZR-1750DHP 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45465
 2015-04-16 20:09:42 +00:00
Felix Fietkau
f6cbbe1332 bcm53xx: make NAND flash timeouts non-interruptible to fix corruption issues 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45464
 2015-04-16 20:09:36 +00:00
Felix Fietkau
d51420eedc bcm53xx: increate trx maxlen to prevent build failures with bigger images 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45461
 2015-04-16 20:09:15 +00:00
Felix Fietkau
f8d499fd3f bcm53xx: fix WXR-1900DHP power led name and add usb led 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45460
 2015-04-16 20:09:08 +00:00
Luka Perkov
76330e9b57 mvebu: better integrate xp-gp 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45459
 2015-04-16 13:53:57 +00:00
Felix Fietkau
c64fdadea7 bcm53xx: make use of the new board detection layer 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45458
 2015-04-16 12:18:34 +00:00
Imre Kaloz
2705cda813 mvebu: add support for the Linksys Caiman and Cobra 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45456
 2015-04-16 09:54:39 +00:00
Luka Perkov
0926e4c22f mvebu: bring back CONFIG_CPU_THERMAL 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45455
 2015-04-16 00:23:34 +00:00
Luka Perkov
a635c0a04e mvebu: refresh kernel config 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45454
 2015-04-16 00:10:42 +00:00
Luka Perkov
dade4535bb mvebu: fix typo in marvell profile 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45453
 2015-04-15 16:23:20 +00:00
Luka Perkov
a046ce235f mvebu: better integrate 385-ap-db 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45452
 2015-04-15 16:23:10 +00:00
Felix Fietkau
147e005fcf bcm53xx: add USB 2.0 power control for WXR-1900DHP 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45451
 2015-04-15 16:06:20 +00:00
Felix Fietkau
83e31eb7e7 bcm53xx: add USB 2.0 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45450
 2015-04-15 16:06:14 +00:00
Rafał Miłecki
3edb55143d bcm53xx: add (disabled) support for upgrading kernel during sysupgrade 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45445
 2015-04-14 20:50:59 +00:00
Rafał Miłecki
3cb8bf44e6 otrx: change command line API to start with a mode 
This will allow adding more modes without options conflict.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45443
 2015-04-14 20:50:46 +00:00
John Crispin
911cf6da60 ar71xx: Enable AT803X_PHY to set special flags 
Open-Mesh OM5P-AN use a AT8035 (F1E) behind one of the ethernet ports. This PHY
requires special flags to work correctly. Otherwise massive packet loss happens
with active POE or when switching the link speed from gigabit ethernet to fast
ethernet. The generic PHY doesn't have support to change these settings.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 45439
 2015-04-14 19:00:57 +00:00
John Crispin
efbdc168ff ar71xx: fix ethernet packet loss issues on OM5P-AN 
The OM5P-AN boards are suffering from ethernet packet loss when booting with
some active POE setups or when switching to Fast Ethernet when previously
booted with Gigabit ethernet attached.

The cause of the problem is that the AR8035 PHYs requires special register
settings to work reliably on these boards. Enable the RGMII TX, RX delays and
disable SmartEE functionality of the AR8035 PHYs. Also enable the RXD and RDV
delay in the ETH_CFG register to fix the issue.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 45438
 2015-04-14 19:00:51 +00:00
Felix Fietkau
5c9c670616 kernel: update bgmac patches to the latest version submitted 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45431
 2015-04-14 12:17:20 +00:00
Felix Fietkau
923bef1678 bcm53xx: refresh kernel patches 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45426
 2015-04-13 22:23:37 +00:00
Felix Fietkau
d0ba3bb1e2 kernel: finally remove layer7 filter support 
it has been non-functional for years and caused numerous memleaks and
crashes for people that tried to enable it.
it has no maintained upstream source, and it does not look like it's
going to be fixed any time soon

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45423
 2015-04-13 22:23:14 +00:00
Felix Fietkau
87f854059a kernel: fix more bgmac dma init/cleanup issues 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45422
 2015-04-13 20:08:30 +00:00
Imre Kaloz
232c61742e mvebu: copy the initramfs files to the bin dir 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45421
 2015-04-13 20:06:47 +00:00
Felix Fietkau
1bf8e555bb kernel: sync bgmac changes with latest upstream submission 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45420
 2015-04-13 17:32:33 +00:00
Felix Fietkau
24e9f52106 bcm53xx: add support for the Buffalo WXR-1900DHP 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45419
 2015-04-13 17:32:25 +00:00
Felix Fietkau
1e48a48915 bcm53xx: fix GPIO pins > 16 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45418
 2015-04-13 17:32:18 +00:00
Felix Fietkau
6bc743ef6f kernel: add bgmac fixes for bcm53xx (fix ethernet bringup on a bcm4709 based device) 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45417
 2015-04-13 17:32:12 +00:00
Felix Fietkau
1f70f452cc bcm53xx: add missing l2 cache controller AUXCTL bit 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45416
 2015-04-13 17:32:05 +00:00
Imre Kaloz
8c684f42e5 mvebu: add support for the in-CPU RTC on the Armada 38x 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45415
 2015-04-13 13:06:34 +00:00
Imre Kaloz
c9e6c7c836 mvebu: add comments to image generation 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45414
 2015-04-13 12:15:40 +00:00
Imre Kaloz
e3bd4f0969 mvebu: stop legacy image generation 
If you can't find the firmware for you board, send proper patches.

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45413
 2015-04-13 12:08:42 +00:00
Imre Kaloz
96c793f529 mvebu: generate a single firmware for the 385-db-ap 
This has been done without having a board, but should work.

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45412
 2015-04-13 12:06:56 +00:00
Imre Kaloz
4da8f96754 mvebu: reflect Armada 38x support in the name 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45411
 2015-04-13 11:30:39 +00:00
Felix Fietkau
d24388da44 bcm53xx: add a comment about the gpio base patch 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45408
 2015-04-12 22:10:44 +00:00
Felix Fietkau
afafbc0d74 kernel: bgmac: add more DMA related fixes 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45407
 2015-04-12 22:10:40 +00:00
Imre Kaloz
09722d0bdc ppc40x: upgrade to 3.18 
left "broken" as I'm not sure if my only board is to blame.. testers welcomed

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45406
 2015-04-12 20:48:13 +00:00
Imre Kaloz
e55532b7af orion: upgrade to 3.18 (compile tested only) 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45405
 2015-04-12 20:45:55 +00:00
Rafał Miłecki
77c75e6fa3 bcm53xx: try to handle Netgear R8000 VLANs config 
It seems to have few ports connected to CPU (only for CPU sending data?)
as part of "SMP dual core 3 GMAC setup" feature.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45403
 2015-04-12 20:11:25 +00:00
Rafał Miłecki
06ac2f5c74 b53: improve overriding CPU port state on BCM5301X 
On BCM5301X there are two different cases to handle: CPU port 8 vs. any
other one. Support for CPU port 8 was already partially implemented but
it lacked setting some extra bit for 2G speed. It also will need to be
extended to implement "SMP dual core 3 GMAC setup". That's the reason
for handling it in separated code block.
This patch also adds overriding CPU port state for port other than 8. It
requires using recently defined GMII_PORT registers.
It was tested for regressions on BCM53011 revs 2 & 3. It was also
confirmed to fix switch on some internal Broadcom board.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45402
 2015-04-12 20:00:42 +00:00
Imre Kaloz
ceb7321e13 mvebu: refresh patches 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45401
 2015-04-12 17:30:41 +00:00
Imre Kaloz
b0ad24f0d5 mvebu: migrate mamba support to the upstreamed code 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45400
 2015-04-12 17:29:50 +00:00
Felix Fietkau
2dbe131a62 bcm53xx: fix bcma gpio chip base 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45399
 2015-04-12 17:22:04 +00:00
Felix Fietkau
808fb7a0bd kernel: add missing memory barrier to bgmac 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45398
 2015-04-12 16:39:24 +00:00
Imre Kaloz
6f01238398 mvebu: handle other SKUs as well 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45396
 2015-04-12 15:04:14 +00:00
Imre Kaloz
d1bedfbdf5 mvebu: include the ahci driver in the default profile 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45395
 2015-04-12 15:03:25 +00:00
Imre Kaloz
6cfe1539da generic: make sure we only try to mangle bootargs we do have 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45393
 2015-04-12 14:46:19 +00:00
Rafał Miłecki
95ef64a779 bcm53xx: allow sysupgrade firmwares without UBI containing rootfs 
In most cases it allows reverting back to the vendor firmware (as they
usually don't use UBI). If users wants to do that we can't do anything
anyway. Erease counters will be just lost. The only thing we do is warn:
"Flashing firmware without UBI for rootfs. All erase counters will be
lost."
It still requires forcing sysupgrade.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45392
 2015-04-12 12:04:13 +00:00
Rafał Miłecki
24d40980b0 bcm53xx: add platform_pre_upgrade to prepare for kernel+UBI sysupgrade 
We can now detect that provided firmware contains kernel and UBI image
partitions. Flashing it in a sane way (keeping erase counters) still
needs to be implemented.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45391
 2015-04-12 11:46:16 +00:00
Rafał Miłecki
a04b71d330 bcm53xx: rework vendor fw handling to don't duplicate upgrade calls 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45389
 2015-04-12 10:42:27 +00:00
Felix Fietkau
8904cd1dcc kernel: add bgmac fixes for various issues 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45388
 2015-04-12 10:35:21 +00:00
Rafał Miłecki
503ccc502d bcm53xx: fix UBI EOF patch to allow sysupgrade after first installation 
With previous version of patch info about need of erasing blocks was
stored once per boot. It was breaking in following scenario:
1) First boot after installation (erasing blocks after 0xdeadc0de)
2) Doing sysupgrade (with ubidetach & ubiformat)
3) Attaching UBI again (it caused all blocks to be erased)

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45387
 2015-04-12 10:20:59 +00:00
Imre Kaloz
a62fa2d365 mvebu: reformat the damaged syscfg partition on the mamba 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45386
 2015-04-12 08:35:33 +00:00
Felix Fietkau
1a797043e5 kernel: revert section sorting change from r41951 
It currently does not seem to make a difference anymore, except by
increasing compressed kernel image size

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45385
 2015-04-11 21:21:03 +00:00
Luka Perkov
bb828e30b0 imx6: add missing patches from 3.14 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45378
 2015-04-11 10:46:20 +00:00
Felix Fietkau
e8126cbfbd kernel: remove kernel module checks/dependencies for 3.14 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45377
 2015-04-11 10:43:46 +00:00
Luka Perkov
8865505665 generic: drop 3.14 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45375
 2015-04-11 10:28:14 +00:00
Luka Perkov
b66b0ae632 brcm47xx: drop 3.14 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45374
 2015-04-11 10:28:11 +00:00
Luka Perkov
fc08d7a3eb adm8668: drop 3.14 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45373
 2015-04-11 10:28:06 +00:00
Luka Perkov
b976ac8b86 mcs814x: drop 3.14 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45372
 2015-04-11 10:28:03 +00:00
Luka Perkov
d21b92af8e imx6: drop 3.14 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45371
 2015-04-11 10:28:00 +00:00
Luka Perkov
912a6371f8 imx6: switch to 3.18 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45370
 2015-04-11 10:27:49 +00:00
Zoltan Herpai
4fd21b203e mxs: reinstate rootfs image creation and dtb copy 
Signed-off-by: Harald Geyer <harald@ccbib.org>
Acked-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 45369
 2015-04-10 21:36:33 +00:00
Zoltan Herpai
db4ce3d16c mxs: Include the right kernel image in the rootfs 
Signed-off-by: Harald Geyer <harald@ccbib.org>
Acked-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 45368
 2015-04-10 21:34:21 +00:00
John Crispin
6d0ad03fac kernel: remove references to kmod-of-i2c 
these break the IB since the module is part of i2c-core now

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45363
 2015-04-10 13:39:33 +00:00
Felix Fietkau
9428c5609b kernel: add jffs2 RENAME_WHITEOUT support, fixes overlayfs renames (#19432) 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45362
 2015-04-10 11:52:59 +00:00
Felix Fietkau
e1f0a91dfe kernel: remove linux 3.10 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45360
 2015-04-10 11:52:47 +00:00
Jonas Gorski
4e826d8303 b53: clean up code to match kernel style better 
* properly enclose macro arguments in paranthesis on use
* remove trailing white space
* convert C99 // comments
* add missing blank lines after declaration
* remove braces from single statement blocks
* split lines > 80 chars (except for one)

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45356
 2015-04-10 10:29:04 +00:00
Jonas Gorski
61885f95f0 b53: define registers available and needed on BCM5301X 
They are also present on some BCM63xx switches.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45355
 2015-04-10 10:28:46 +00:00
Rafał Miłecki
9d6e04a4f1 bcm53xx: build image for ASUS RT-AC56U 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45353
 2015-04-10 09:58:00 +00:00
Rafał Miłecki
71fcbffc91 bcm53xx: Luxul XWC-1000 has only 128 MiB of RAM 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45352
 2015-04-10 09:42:48 +00:00
John Crispin
3bc1f36e2b sunxi: don't enable ARMTHUMB XZ BCJ filter in kernel 
Having CONFIG_XZ_DEC_ARMTHUMB enabled breaks squashfs when ARM BCJ
filter was used to create the filesystem (and that's what we do on
all ARM targets). Thus unset CONFIG_XZ_DEC_ARMTHUMB to fix
squashfs on sunxi.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 45347
 2015-04-10 08:29:26 +00:00
John Crispin
6adf864770 ipq806x: automatically select kmod-usb-phy-qcom-dwc3 
kmod-usb-phy-qcom-dwc3 is required to get USB working on ipq806x. It was
missed in previous commit so let's enable it automatically.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45345
 2015-04-10 08:28:44 +00:00
John Crispin
607a7a35be ralink: fix cevt-r4k hack 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45342
 2015-04-10 08:27:44 +00:00
John Crispin
f4edd1b918 generic/3.18: add missing wireless symbols 
triggered by enabling RFKILL in global build options

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 45335
 2015-04-09 10:33:11 +00:00
John Crispin
b7f19a5b26 ramips: Add support for Microduino MicroWRT 
MicroWRT is an wireless router with 2 USB,1 ethernet port. It
has a 16M flash and 64M DDR2 RAM. You can use most interface, such as
i2c, SPI, i2s and PCIe. Besides that there are three expansion borad to
combine with the core board. The detailed information, please refer to
https://www.microduino.cc/wiki/index.php?title=Main_Page

This patch adds support for it.
Because there is only one port,so disabled VLAN and use eth0 as lan
port. and only a power LED control by power pin.

Signed-off-by: 盛凯 <shengkai81@gmail.com>

SVN-Revision: 45331
 2015-04-09 10:32:37 +00:00
John Crispin
8f92e94a74 ar71xx: enable LEDs on Hornet-UB X2 
None of the LEDs are enabled by default on the Hornet-UB X2 board
(the 16/64MB version of the Hornet-UB), because it uses a different
board-name ("hornet-ub-x2"); but hornet-ub and hornet-ub-x2 boards
are equivalent WRT their LEDs.

SIgned-off-by: Joshua Judson Rosen <jrosen@harvestai.com>

SVN-Revision: 45328
 2015-04-09 10:32:08 +00:00
Zoltan Herpai
fb0534bcc3 generic: add a few missing symbols for 4.0 
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 45324
 2015-04-09 10:28:59 +00:00
Rafał Miłecki
2198db252c bcm53xx: switch to the otrx for verifying TRX images 
This adds checking CRC32 of provided firmware image.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45320
 2015-04-09 06:33:56 +00:00
Rafał Miłecki
c6f9582116 brcm47xx: image: use "-" separator for device version 
This makes legacy subtarget follow two other.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45319
 2015-04-09 05:40:37 +00:00
Rafał Miłecki
a8b0e75291 brcm47xx: verify also standard TRX images during sysupgrade 
It allows detecting data corruption for plain TRX as well.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45318
 2015-04-09 05:36:16 +00:00
Rafał Miłecki
3fad95446a brcm47xx: fix WRT300N devices magics for sysupgrade check 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45317
 2015-04-09 05:22:10 +00:00
Rafał Miłecki
44b128b0aa brcm47xx: switch to the otrx for verifying TRX images 
This adds checking CRC32 of provided firmware image.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45316
 2015-04-09 05:22:04 +00:00
Gabor Juhos
1630498e4c kernel: remove ATHEROS_AR{231X,71XX} config symbols from the patches 
Those don't exist anymore.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 45314
 2015-04-08 16:21:04 +00:00
Rafał Miłecki
80971cd0f9 brcm47xx: image: use new (& fixed) FILESYSTEM variable for trx command 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45313
 2015-04-08 09:50:57 +00:00
Rafał Miłecki
4c1ee6f24d bcm53xx: replace few BCM5301X patches with versions sent upstream 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45311
 2015-04-08 09:22:02 +00:00
Rafał Miłecki
705651884d brcm47xx: update legacy subtarget description 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45310
 2015-04-08 05:55:32 +00:00
Rafał Miłecki
7798074429 brcm47xx: add fix "Data bus error" on CardBus ssb SoCs 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45308
 2015-04-08 05:09:42 +00:00
Rafał Miłecki
1d2abb6f16 brcm47xx: reverse 2 LEDs polarity on WRT320N v1 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45307
 2015-04-08 04:46:27 +00:00
Rafał Miłecki
a9d2a1aa29 kernel: backport ssb patches up to changes queued for 4.1 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45306
 2015-04-07 22:06:17 +00:00
Imre Kaloz
8100b227a9 generic/4.0: upgrade to 4.0-rc7 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45305
 2015-04-07 21:34:38 +00:00
Rafał Miłecki
95f7fb8f49 brcm47xx: define rest of LEDs & buttons for WRT320N 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45304
 2015-04-07 21:31:36 +00:00
Imre Kaloz
7a9fe56452 generic/3.18: upgrade to 3.18.11 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45303
 2015-04-07 21:29:26 +00:00
Imre Kaloz
be2d60465d mvebu: disable cpu idle on a38x 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45302
 2015-04-07 21:13:44 +00:00
Gabor Juhos
0bd06aca20 ar71xx: add user-space support for RB911G-5HPacD 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 45300
 2015-04-07 20:04:14 +00:00
Gabor Juhos
d0a6b278db ar71xx: add initial support for RB911G-5HPacD 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 45299
 2015-04-07 20:04:03 +00:00
Gabor Juhos
96b006eb32 ar71xx: routerboot: export extended wlan data via sysfs 
Export the data to make it accessible from user-space.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 45298
 2015-04-07 20:03:43 +00:00
Gabor Juhos
76b5a9aa7d ar71xx: routerboot: add support for extended radio data 
On newer Mikrotik boards, the radio calibration data
is stored differently and uses LZO compression instead
of RLE.

Update the RouterBOOT helper code to support the new
format.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 45297
 2015-04-07 20:03:35 +00:00
Gabor Juhos
f0cbd004ee ar71xx: select RLE_DECOMPRESS directly by the RouterBOOT helper code 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 45296
 2015-04-07 20:03:24 +00:00
Gabor Juhos
298a46c0b3 kernel: add support for the MX25L512E and SI25CD512 SPI flash chips 
These are used on some MikroTik boards.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 45295
 2015-04-07 20:03:15 +00:00
Imre Kaloz
f60fea1923 Upstream commits 43b68879de27b1993518687fbc6013da80cdcbfe and ce6031c89a35cffd5a5992b08377b77f49a004b9 improve the cpuidle driver on Armada XP. The latter commit improves performance at the slight expense of power consumption. 
Signed-off-by: Claudio Leite <leitec@staticky.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45294
 2015-04-07 18:13:51 +00:00
Rafał Miłecki
503d845522 brcm47xx: drop old patch disabling cardbus mode on Netgear WNR834B 
First of all this patch was affecting other devices, not just Netgear
WNR834B. E.g. Linksys WRT300N v1 also has boardtype 0x0472.
This was breaking PCI on WRT300N, ssb couldn't detect core working in
hostmode (due to mips_busprobe32 failing).

Secondly this patch should not be needed for years now. From the analyze
of #8861 it seems it was needed just to make devices at slots other than
0 discoverable. Setting cardbus to 0 was simply making ssb allow access
to PCI config for devices other than bridge.
With the upstream commit a6c8462 (ssb: fix cardbus slot in hostmode) we
allow accessing device at slot 1 which should be enough for CardBus.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45293
 2015-04-07 15:40:51 +00:00
Rafał Miłecki
b6e8da2e14 bcm53xx: image: share function checking TRX in provided firmware 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45292
 2015-04-07 14:14:08 +00:00
Rafał Miłecki
7abd779730 bcm53xx: display all errors (not just the 1st one) when checking image 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45291
 2015-04-07 14:14:02 +00:00
Rafał Miłecki
a19b69a717 bcm53xx: compare provided firmware magic with device magic 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45290
 2015-04-07 14:13:56 +00:00
Rafał Miłecki
e2b59e4dbc brcm47xx: detect Linksys WRT320N v1 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45289
 2015-04-07 13:08:17 +00:00
Rafał Miłecki
9f740ddc0d brcm47xx: backport MIPS BCM47XX patches queued for 4.1 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45288
 2015-04-07 12:54:23 +00:00
Rafał Miłecki
3fa00eeda2 brcm47xx: group MIPS BCM47XX backported patches by source kernel 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45287
 2015-04-07 11:54:18 +00:00
Felix Fietkau
df7bb89edd ar71xx: fix new mktplinkfw image code - flags for sysupgrade vs factory were swapped (fixes #19400) 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45281
 2015-04-06 19:26:30 +00:00
Felix Fietkau
a6d4d1e152 x86: set ARCH_PACKAGES for the x86_64 subtarget (fixes #19425) 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45278
 2015-04-06 10:07:43 +00:00
John Crispin
bf26426fd8 ipq806x: another missing symbol 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45277
 2015-04-05 07:53:32 +00:00
John Crispin
10a71220f2 kernel: CONFIG_BRIDGE should not be overridden 
this breaks ebtables, netfilter, ... during fullbuilds

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45276
 2015-04-05 07:40:38 +00:00
Florian Fainelli
2738cfcfda arm64: remove CGROUPS override 
SCHED_AUTOGROUP was turned on by default which forces the use of
CGROUPS, conflicting with the options we offer from menuconfig, remove
that.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 45275
 2015-04-04 19:33:32 +00:00
Florian Fainelli
3e6c6e0c7b mcs814x: switch to 3.18 kernel 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 45274
 2015-04-04 18:01:26 +00:00
Florian Fainelli
b1ba4c5096 mcs814x: add support for 3.18 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 45273
 2015-04-04 18:01:07 +00:00
John Crispin
67f4c4b992 xburst: mark the asoc modules as BROKEN until the upstream fixes get merged 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45267
 2015-04-03 20:41:50 +00:00
John Crispin
4ad0ad9817 ipq806x: enable usb3 packages in default profile 
Default profile already enables usb2 so we'll do the same for usb3 now
that we have support for it.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45262
 2015-04-03 19:06:38 +00:00
John Crispin
5d52f4b51d ipq806x: add platform usb support 
This change adds DWC3 QCOM USB phys and TCSR drivers. These are
cherry-picked from the following LKML threads:
*dwc3 qcom: https://lkml.org/lkml/2014/9/12/599
*tcsr: https://lkml.org/lkml/2015/2/9/579

We're also adding an additional patch to add the corresponding dev nodes
in the IPQ806x and AP148 dts files.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45261
 2015-04-03 19:06:30 +00:00
John Crispin
114338003a kernel: add package for dwc3 usb driver used on ipq806x 
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45260
 2015-04-03 19:06:21 +00:00
John Crispin
654312267c ipq806x: enable usb support 
This change doesn't make USB functional but it does make it selectable
from a configuration perspective.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45259
 2015-04-03 19:06:11 +00:00
John Crispin
e26f0d86e8 ipq806x: another missing symbol 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45257
 2015-04-03 19:05:57 +00:00
Felix Fietkau
541f569a9d linux: Add missing config options to generic configs 
These missing options have been noticed while enabling the following
configuration options on ipq806x, but they're available in the standard
kernel:
*ARCH_QCOM
*CONFIG_USB_SUPPORT
*CONFIG_USB_DWC3
*CONFIG_MFD_SYSCON

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45256
 2015-04-03 18:48:10 +00:00
Felix Fietkau
4869387480 ipq806x: clean-up kernel config file 
Options that used to be in target config have been added to the generic
config file, so remove them.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45255
 2015-04-03 18:47:51 +00:00
John Crispin
a1b1be473e omap: add missing symbols 
enabled by default like other TWL4030 symbols

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 45238
 2015-04-02 14:32:01 +00:00
John Crispin
69aa85a0d2 omap: add profile for BeagleBoard 
original BeagleBoard has no Ethernet
provide a profile with all available USB Ethernet adapters
EBVBeagle comes with a kmod-usb-net-mcs7830 compatible device

tested with BeagleBoard C4

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 45237
 2015-04-02 14:31:51 +00:00
John Crispin
245ebe83dc omap: remove patch wlcore Add-support-for-DT-platform-data 
- does not compile with 3.18
compile error: 'struct wl12xx_platform_data' has no member named 'gpio'

- different version was sent 2015 but cannot be tested by me
see "[PATCH v7 0/6] wlcore: add device-tree support" series
in linux-omap

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 45235
 2015-04-02 14:31:32 +00:00
Rafał Miłecki
509cce44bd bcm53xx: sprom: sync with mainline driver 
The main difference now is bcm53xx registering it as platform (DT)
driver.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45230
 2015-04-02 12:02:56 +00:00
Rafał Miłecki
91071e366c bcm53xx: sprom: simplify reading NVRAM after last backports 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45229
 2015-04-02 12:01:56 +00:00
John Crispin
bb0e931298 ipq806x: add missing symbol 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45228
 2015-04-01 22:57:54 +00:00
Rafał Miłecki
aefcd2b84c brcm47xx: backport two MIPS nvram.c patches 
Also replace SPROM patch with (the same) mainlined version.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45227
 2015-04-01 20:23:37 +00:00
John Crispin
0bba806cb7 kernel: add missing symbol 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45218
 2015-04-01 13:06:14 +00:00
John Crispin
eeff1f0a12 ixp4xx: fix beeper module dependencies 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45214
 2015-04-01 09:03:13 +00:00
John Crispin
3ec7ccf501 config: add an option to enable KPROBE 
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45212
 2015-04-01 08:33:04 +00:00
John Crispin
bf7eeea7ee ipq806x: clean up kernel conf 
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45211
 2015-04-01 08:32:29 +00:00
John Crispin
d3a9fc4586 ipq806x: add support for 4.0 kernel 
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45210
 2015-04-01 08:32:03 +00:00
John Crispin
2d74104b52 ipq806x: move 020-add-ap148-bootargs.patch in patches-3.18 
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45209
 2015-04-01 08:31:52 +00:00
John Crispin
449c5f7b30 ramips: Add support for ZTE Q7 
ZTE Q7 is a wireless router with SD Card,USB,1 ethernet port and a battery.It used MT7620a SoC.
I can,t find any information about this router on ZTE's website.
But I found this : http://en.cctairmobi.com/plus/list.php?tid=40
This router is the same as ZTE Q7 and later I found that both routers are made by the same company:-D

This patch adds support for it.
Because there is only one port,I disabled VLAN and use eth0 as lan port.
I could only create a sysupgrade firmware because I don't know how the orignal webpage check the uploaded image:-(

Signed-off-by: 郭传鈜 <gch981213@gmail.com>

SVN-Revision: 45208
 2015-04-01 08:31:46 +00:00
John Crispin
e078fbdacf kernel: add missing symbols to config and modules 
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
v2: changes in input.mk broke the patch, some of the CONFIG_SND_*
    stuff was added already

SVN-Revision: 45205
 2015-04-01 08:31:26 +00:00
Rafał Miłecki
bf828d3fd0 bcm53xx: use bcm47xx_nvram.c with the latest patches 
This will be hopefully a mainline version.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45204
 2015-04-01 07:21:59 +00:00
Gabor Juhos
36e10677df ar71xx: fix platform device support in the gpio-74x164 driver 
Platform device support has been removed from the gpio-74x164
driver in 3.14. Restore that.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 45203
 2015-03-31 21:31:36 +00:00
Rafał Miłecki
9c5aa7c528 brcm47xx: image: share function checking TRX in provided firmware 
This will allow us to calculate crc32 in a shared code.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45202
 2015-03-31 21:16:19 +00:00
Imre Kaloz
f079ad97ce mvebu: use CONFIG_MANGLE_BOOTARGS 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45200
 2015-03-31 19:27:59 +00:00
Imre Kaloz
77f322e0d7 mvebu: add missing a38x dts labels 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45199
 2015-03-31 19:23:32 +00:00
Imre Kaloz
9bb302ff9e generic/4.0: upgrade to 4.0-rc6 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45198
 2015-03-31 19:22:28 +00:00
Imre Kaloz
35df52f89f generic/3.18: upgrade to 3.18.10 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45197
 2015-03-31 19:21:13 +00:00
Imre Kaloz
17fb965d6b generic: add CONFIG_MANGLE_BOOTARGS and disable it by default 
Enabling this option renames the bootloader supplied root=
and rootfstype= variables, which might have to be know but
would break the automatisms OpenWrt uses.

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45196
 2015-03-31 19:18:03 +00:00
Imre Kaloz
b9c4dadc11 mvebu: deal with the new path in the fan control script for Linux 4.0+ 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45195
 2015-03-31 19:12:27 +00:00
Gabor Juhos
82f0308be9 kernel: update yaffs code to the latest version 
Use the latest version of the yaffs code. Fetched from the
yaffs2 git tree and it is based on the following commit:

  commit 7e5cf0fa1b694f835cdc184a8395b229fa29f9ae
  Author: Charles Manning <cdhmanning@gmail.com>
  Date:   Thu Aug 7 11:25:05 2014 +1200

    yaffs-direct: Basic tests. Add lpthread flag for background gc support

    Signed-off-by: Charles Manning <cdhmanning@gmail.com>

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 45188
 2015-03-31 15:31:57 +00:00
Zoltan Herpai
ad9f61d3bb kernel: add a couple missing symbols for 4.0 
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 45186
 2015-03-31 13:23:46 +00:00
Rafał Miłecki
090a510576 brcm47xx: image: convert legacy Linksys & Netgear devices 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45184
 2015-03-31 12:44:31 +00:00
Rafał Miłecki
4faba3cc2e brcm47xx: image: convert generic subtarget to the new images system 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45183
 2015-03-31 12:17:08 +00:00
Rafał Miłecki
3d481d31ed brcm47xx: image: convert all mips74k images to the new building system 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45181
 2015-03-31 11:26:50 +00:00
Rafał Miłecki
184c0af4e2 brcm47xx: image: add helpers for defining devices 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45180
 2015-03-31 11:26:45 +00:00
Jonas Gorski
a709beb4ae brcm63xx: fix zyxel kernel name 
Accidentally left over development artifact.

Reported-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45179
 2015-03-31 09:54:15 +00:00
Rafał Miłecki
6c1852cb26 brcm47xx: image: use standard KERNEL_IMAGE to avoid warnings 
KERNEL_IMAGE is used as target rule so reusing the same name causes:
Makefile:326: warning: overriding recipe for target `bin/brcm47xx/vmlinux.lzma'
Makefile:326: warning: ignoring old recipe for target `bin/brcm47xx/vmlinux.lzma'
Makefile:326: warning: overriding recipe for target `build_dir/target-mipsel_74kc+dsp2_uClibc-0.9.33.2/linux-brcm47xx_mips74k/vmlinux.lzma'
Makefile:326: warning: ignoring old recipe for target `build_dir/target-mipsel_74kc+dsp2_uClibc-0.9.33.2/linux-brcm47xx_mips74k/vmlinux.lzma'

Unfortunately this will cause copying vmlinux.lzma over and over like:
cp vmlinux.lzma FOO-kernel.bin
which is redundant on brcm47xx where we never modify kernel image.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45178
 2015-03-31 08:56:08 +00:00
Gabor Juhos
cc9600a1eb ar71xx/mikrotik: disable atnoher two non MikroTik boards 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 45177
 2015-03-31 08:30:56 +00:00
Gabor Juhos
04ba95f6d3 ar71xx/mikrotik: disable non MikroTik boards 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 45176
 2015-03-31 07:56:25 +00:00
Gabor Juhos
26800ef074 ar71xx/mikrotik: use correct symbol to disable overlayfs 
The Kconfig symbol has been changed in 3.18.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 45175
 2015-03-31 07:56:22 +00:00
Rafał Miłecki
8ec31f25e3 brcm47xx: fix checking cross-vendors firmware images 
This change won't allow installing e.g. Netgear firmware on Linksys
device.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45174
 2015-03-31 07:26:30 +00:00
Rafał Miłecki
463a449f84 brcm47xx: update Linksys firmwares (add new E2500 versions) 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45173
 2015-03-31 07:26:22 +00:00
Rafał Miłecki
a445846305 brcm47xx: display all errors (not just the 1st one) when checking image 
This way people forcing upgrade will know what may go wrong.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45172
 2015-03-31 06:05:35 +00:00
Rafał Miłecki
44dfe17576 brcm47xx: recognize more device specific firmwares 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45171
 2015-03-31 05:39:33 +00:00
Rafał Miłecki
b34040f990 brcm47xx: compare provided firmware magic with device magic 
This makes sysupgrade reject firmware images for different devices.
Right now only support for 2 sample devices is implemented.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45170
 2015-03-30 22:06:11 +00:00
Jonas Gorski
a54b8303d2 brcm63xx: don't build non-dtb kernels anymore 
Now that all supported boards have an dts there is no need for a
dtb free kernel anymore.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45169
 2015-03-30 20:21:24 +00:00
Jonas Gorski
0f08442ded brcm63xx: move DSL-275XB to DT 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45168
 2015-03-30 20:21:15 +00:00
Jonas Gorski
f77b446051 brcm63xx: move bcm6318 reference boards to DT 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45167
 2015-03-30 20:21:07 +00:00
Jonas Gorski
f644c1581a brcm63xx: move VG50 to DT 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45166
 2015-03-30 20:21:01 +00:00
Jonas Gorski
f973580488 brcm63xx: move V2110 to DT 
Also readd image generation which was accidentally dropped in r43364.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45165
 2015-03-30 20:20:49 +00:00
Jonas Gorski
d8ba40cfcd brcm63xx: use relocate to move the kernel back to start of ram 
Appearently the kernel only uses kernel above it, so moving it to an
higher address causes a lot of unavailable memory (#19327).

Also move the on-flash kernel to 0x80a0000, as newer CFEs don't like
uncompressing there (net-booting an ELF kernel is fine, though).

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45164
 2015-03-30 20:20:15 +00:00
Jonas Gorski
8353a3bd45 generic: relocate: make the cacheline size configurable 
Different targets have different cache line sizes.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45163
 2015-03-30 20:20:10 +00:00
Jonas Gorski
703c41cf01 ramips: move relocating loader to common location 
Allow other targets to use it, too.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45162
 2015-03-30 20:20:08 +00:00
Gabor Juhos
3129f0c6f2 ar71xx/mikrotik: re-enable 4KiB flash sector erase 
The setting has been lost during the transition to 3.18.
The CONFIG_M25PXX_PREFER_SMALL_SECTOR_ERASE option is not
available anymore, so use CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
instead.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 45161
 2015-03-30 19:57:52 +00:00
Gabor Juhos
62a8665fea ar71xx: re-enable AR8216_PHY_LEDS 
The setting has been lost during the transition to 3.18.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 45160
 2015-03-30 18:12:54 +00:00
Gabor Juhos
18f6a34113 ar71xx: sync kernel config 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 45159
 2015-03-30 18:12:50 +00:00
John Crispin
2b925161d8 xburst: add missing symbol 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45155
 2015-03-30 12:47:51 +00:00
Steven Barth
7e7f329ccf kernel/generic: (try) fixing MAP-E patch broken in 4.0 
Now it at least compiles, otherwise untested.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 45145
 2015-03-30 08:48:51 +00:00
Rafał Miłecki
1751676c8b brcm47xx: convert Netgear WNDR3700 V3 to the new image building system 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45144
 2015-03-29 19:53:11 +00:00
Rafał Miłecki
8e4b74b9fe brcm47xx: convert Linksys E1200 V2 to the new image building system 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45143
 2015-03-29 18:15:38 +00:00
John Crispin
23d37c1208 ar71xx: fix model string detection on NETGEAR WNDR3700/3800/WNDRMAC 
There were a few issues with the existing code to detect the model string:
* Always using the string starting with byte 56 would cut off the W of WNDR when
  the ID starts with 29763654+16+64 instead of 29763654+16+128
* The string contained garbage after the zero byte instead of cutting it off
  after the zero (which wasn't always visible using busybox tools, but could
  confuse other scripts)

Tested on a WNDR3700v1 and a WNDR3700v2 using the new 29763654+16+64 ID in the
ART. Furthermore, tested against ART dumps of a WNDR3700v2 using the old
$'\xff...' value and a WNDR3800.

The [ -z "$model" ] check was dropped as there is no way to actually hit this
unless no ART partition is found at all.

The awk command was carefully crafted to work both with gawk and the (horribly
broken) busybox awk.

Fixes #18992.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 45140
 2015-03-29 12:58:01 +00:00
Imre Kaloz
ebf1e2461a x86_64: add description, maintainership 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45138
 2015-03-29 12:17:39 +00:00
Felix Fietkau
661f05262b arm64: remove bogus CONFIG_WIRELESS/CONFIG_WLAN overrides 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45132
 2015-03-29 07:36:17 +00:00
Luka Perkov
1e2f88b17b imx: add initial version of 3.18 support 
This is build tested only.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45125
 2015-03-29 05:48:56 +00:00
Luka Perkov
375337266d kernel: add few missing symbols 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45118
 2015-03-29 04:50:16 +00:00
Luka Perkov
d949d88ef6 kernel: add symbol 
Several targets are not using EMAC_ROCKCHIP so define it in generic config.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45117
 2015-03-29 04:43:59 +00:00
Felix Fietkau
e731ea23a8 x86: add myself as maintainer 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45116
 2015-03-29 04:32:15 +00:00
Felix Fietkau
196fb76a4c x86: make x86_64 a subtarget instead of a standalone target 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45115
 2015-03-29 04:32:01 +00:00
Felix Fietkau
09aad60610 x86: remove bogus bzImage copy that breaks initramfs+no-initramfs builds 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45114
 2015-03-29 04:31:35 +00:00
Felix Fietkau
795e7cf60d kernel: fix linux/spi/spidev.h portability issues with musl 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45105
 2015-03-29 04:28:24 +00:00
Felix Fietkau
9444bc1ee2 kernel: clean up fq_codel default patch 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45104
 2015-03-29 04:28:02 +00:00
Florian Fainelli
85b0d25861 adm8668: switch to 3.18 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 45095
 2015-03-28 18:18:50 +00:00
Florian Fainelli
f51f3ee9bc adm8668: add 3.18 support 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 45094
 2015-03-28 18:18:38 +00:00
Florian Fainelli
26cf81b94b kernel: refresh 3.18 patches 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 45093
 2015-03-28 18:17:46 +00:00
Felix Fietkau
0b13d69bba arm64: update to linux 3.18 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45092
 2015-03-28 13:38:52 +00:00
Felix Fietkau
693e5aae41 brcm63xx: remove linux 3.14 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45089
 2015-03-28 13:21:09 +00:00
Felix Fietkau
130acd0f4c mxs: remove linux 3.14 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45088
 2015-03-28 13:21:04 +00:00
Felix Fietkau
b63aa281ee rb532: remove linux 3.14 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45087
 2015-03-28 13:20:58 +00:00
Felix Fietkau
56c580f5f4 uml: remove linux 3.14 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45086
 2015-03-28 13:20:52 +00:00
Felix Fietkau
7427007193 x86: remove the olpc subtarget, it has been unmaintained for a long time 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45083
 2015-03-28 11:37:08 +00:00
Felix Fietkau
518d2b90e6 iop32x: moved to targets feed 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45082
 2015-03-28 10:44:55 +00:00
Felix Fietkau
22b38f145d cobalt: moved to targets feed 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45081
 2015-03-28 10:44:49 +00:00
Felix Fietkau
04182658ef sibyte: moved to targets feed 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45080
 2015-03-28 10:44:44 +00:00
Felix Fietkau
e38b78926a sparc: moved to targets feed 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45079
 2015-03-28 10:44:37 +00:00
Felix Fietkau
40c5bee0cd cns21xx: moved to targets feed 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45078
 2015-03-28 10:44:31 +00:00
Felix Fietkau
65c567da13 rb532: switch to 3.18 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 45073
 2015-03-27 21:22:22 +00:00
Felix Fietkau
2daa34da02 rb532: align partitions to 128KB 
because block2mtd wants "erasesize must be a divisor of device size" since 3.15

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 45072
 2015-03-27 21:22:17 +00:00
Felix Fietkau
c2d1ad30e8 rb532: add 3.18 support 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 45071
 2015-03-27 21:22:10 +00:00
John Crispin
85bf288428 lantiq: remove arphaned folder 
the new buildbot was picking this up as a valid target.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45068
 2015-03-27 19:47:22 +00:00
John Crispin
ddb5ab2acf ralink: mt7621 add ECHI OCHI XCHI support 
Lets hope that this time it won't break the other ralink targets.

Signed-off-by: wengbj <fl.service@t-firefly.com>

SVN-Revision: 45067
 2015-03-27 19:07:29 +00:00
Felix Fietkau
c6a29d2528 gemini: fix usb driver compilation on 3.18 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 45065
 2015-03-27 16:03:16 +00:00
Zoltan Herpai
19db04e699 mxs: update dtb path in image Makefile 
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 45056
 2015-03-27 02:35:11 +00:00
Felix Fietkau
f76a85515a ar71xx: add missing id for WNR2000v3 image (fixes #18959) 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45054
 2015-03-27 00:35:34 +00:00
Zoltan Herpai
a077e4af96 mxs: bump to 3.18 
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 45053
 2015-03-26 23:35:50 +00:00
Zoltan Herpai
01748fbce2 mxs: add sdcard image builder 
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 45052
 2015-03-26 23:34:43 +00:00
Zoltan Herpai
39370cbe25 mxs: enable uboot-mxs-duckbill build for duckbill profile 
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 45044
 2015-03-26 23:04:27 +00:00
Luka Perkov
3012319505 generic: drop old kirkwood mach types 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45043
 2015-03-26 22:48:31 +00:00
Zoltan Herpai
1f26498751 mxs: add 3.18 support 
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 45041
 2015-03-26 22:18:47 +00:00
Felix Fietkau
65708f749a gemini: make dd commands more portable 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45039
 2015-03-26 20:37:19 +00:00
Felix Fietkau
6cda886f60 gemini: switch mantainer to myself 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 45038
 2015-03-26 20:37:09 +00:00
Felix Fietkau
17532417c7 gemini: nuke 3.10 support 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 45037
 2015-03-26 20:36:59 +00:00
Felix Fietkau
b953a14036 gemini: remove broken flag 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 45036
 2015-03-26 20:36:49 +00:00
Felix Fietkau
dc622768a7 gemini: switch to 3.18 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 45035
 2015-03-26 20:36:40 +00:00
Felix Fietkau
44b3e3af17 gemini: don't build jffs2 image for Raidsonic board 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 45034
 2015-03-26 20:36:35 +00:00
Felix Fietkau
a304f3d2b6 gemini: add 3.18 support 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 45033
 2015-03-26 20:36:30 +00:00
Lars-Peter Clausen
b18f5eb44a xburst: Update to 3.18 
Update the xburst target to kernel version 3.18 and also remove the broken 3.10 support.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>

SVN-Revision: 45031
 2015-03-26 19:46:01 +00:00
Felix Fietkau
c25bf32f8d ar71xx: fix image size checks for WNDR3700 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45030
 2015-03-26 18:50:44 +00:00
John Crispin
40d25d3eb5 ralink: drop xhci patch, it break !mt7621 builds 
will re-add it tomorrow after fixing it

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45028
 2015-03-26 16:24:19 +00:00
John Crispin
2cedb63d84 ralink: the xhci patch broke ehci Signed-off-by: John Crispin <blogic@openwrt.org> 
SVN-Revision: 45027
 2015-03-26 14:49:26 +00:00
Imre Kaloz
f6eff33b8d mvebu: fixup usb3 support on the a38x 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45026
 2015-03-26 14:32:45 +00:00
Imre Kaloz
4bac1253c1 generic/4.0: upgrade to 4.0-rc5 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45025
 2015-03-26 14:06:42 +00:00
Imre Kaloz
23b880b373 mvebu: add a coherency fix which didn't make it to -stable, yet 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45024
 2015-03-26 13:52:21 +00:00
John Crispin
21e0f98903 ralink: add default pinctrl node for mt7621 eval kit 
fixes #19213

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45022
 2015-03-26 12:23:02 +00:00
John Crispin
0a9e38bb21 ralink: mt7621 add ECHI OCHI XCHI support 
The usb stroage not working since updated 3.18. Porting from MTK's source code.

Signed-off-by: wengbj <fl.service@t-firefly.com>

SVN-Revision: 45021
 2015-03-26 10:59:51 +00:00
John Crispin
024e0c1835 ralink: add FireWRT power button 
Signed-off-by: Jay Weng <fl.service@t-firefly.com>

SVN-Revision: 45019
 2015-03-26 10:59:36 +00:00
John Crispin
10aa09b731 ralink: MT7621 add i2c controller driver 
ralink i2c driver is not working on MT7621 platform. Porting a new drivers from MTK's source code.
Last time i got some mess . This is new version.

Signed-off-by: Jay Weng <fl.service@t-firefly.com>

SVN-Revision: 45018
 2015-03-26 10:59:31 +00:00
John Crispin
ad91262a94 kernel: add missing symbol 
Signed-off-by: John Szakmeister <john@szakmeister.net>

SVN-Revision: 45017
 2015-03-26 10:59:24 +00:00
John Crispin
67c83a6595 x86: add missing symbol to xen_domu 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45016
 2015-03-26 10:59:10 +00:00
John Crispin
2d994f2fdc cobalt: enable bridge 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45014
 2015-03-26 10:58:59 +00:00
John Crispin
c67144cc05 kernel: extend seccomp with a LOG action 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45007
 2015-03-26 10:58:03 +00:00
Felix Fietkau
414e8ba634 bcm53xx: use the correct kernel image 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45003
 2015-03-26 10:42:36 +00:00
Imre Kaloz
af69bf56b6 drop 3.19 support 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45002
 2015-03-26 09:42:59 +00:00
Felix Fietkau
34b51b6f6f ar71xx/image: move wdr3500/wdr3600/wdr4300 to new building code 
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 45000
 2015-03-25 17:58:14 +00:00
Felix Fietkau
8d2d62ca95 ar71xx/image: add tplink device template for new building code 
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 44999
 2015-03-25 17:58:10 +00:00
Felix Fietkau
41785176ec ar71xx/image: add Build/mktplinkfw as buildstep for new build code 
Use `mktplinkfw sysupgrade` or `mktplinkfw factory` or
`mktplinkfw image`

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 44998
 2015-03-25 17:58:05 +00:00
Felix Fietkau
48c69e3022 bcm53xx: convert to new image building code 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44996
 2015-03-25 17:57:44 +00:00
Jonas Gorski
8ffc831bef brcm63xx: use a lookup for bcmcia's ready gpio 
Should fix pcmcia on BCM6348 and BCM6358 after switching to DT-probed
gpio controllers.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44995
 2015-03-25 15:37:38 +00:00
Jonas Gorski
1e07f8c7ff brcm63xx: fix bcm96328avng board name 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44994
 2015-03-25 15:36:26 +00:00
Jonas Gorski
4dc169f9a2 brcm63xx: fix bt v2500v dts based detection 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44993
 2015-03-25 15:36:15 +00:00
Jonas Gorski
10cdfd04e6 brcm63xx: move RTA770(B)W to dts 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44992
 2015-03-25 15:36:12 +00:00
Jonas Gorski
0e4c1ba284 brcm63xx: move MAGIC to dts 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44991
 2015-03-25 15:36:05 +00:00
Jonas Gorski
582dfc52f5 brcm63xx: move CPVA502+ to dts 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44990
 2015-03-25 15:35:57 +00:00
Jonas Gorski
46b4d4d1d5 brcm63xx: move dg834g v4 to dts 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44989
 2015-03-25 15:35:43 +00:00
Jonas Gorski
30a579c674 brcm63xx: move dsl-2640u to dts 
Also build image again(?).

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44988
 2015-03-25 15:35:37 +00:00
Jonas Gorski
16ea19053a brcm63xx: move bcm963268bu_p300 to dts 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44987
 2015-03-25 15:35:24 +00:00
Jonas Gorski
ad218d3033 brcm63xx: fix compilation on 3.14 
Fixes the following issue:

drivers/gpio/gpio-bcm63xx.c: In function 'bcm63xx_gpio_probe':
drivers/gpio/gpio-bcm63xx.c:80:4: error: implicit declaration of function 'devm_kasprintf' [-Werror=implicit-function-declaration]

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44986
 2015-03-25 15:35:15 +00:00
Jonas Gorski
2d3371cd0f brcm63xx: Add BT Home Hub 2A support. 
Support for the BT HomeHub 2.0 Type A.

This router was manufactured by Thomson, and it's BCM6358 based.
The leds are controled by two chained HC594, all working ok. The BCM5325
switch has the RESET# pin wired to the GPIO15, but currently there is no
way to tell the b53 driver how to get this gpio number in brcm63xx,
therefore swconfig won't use it when performing a switch reset.

The patch was tested with several firmwares, and all except unsupported
stuff (i.e xDSL) works pretty well.

Tested-by: Tahir <tahir00ali@gmail.com>
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>

SVN-Revision: 44985
 2015-03-25 15:35:12 +00:00
Jonas Gorski
065d6e9047 brcm63xx: move kernel load address to 8MiB 
Fixes boot when uncompressed kernel is > 4 MiB (#19251).

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44984
 2015-03-25 15:34:59 +00:00
Jonas Gorski
ee0140a678 brcm63xx: hcsimage: respect load address 
Respect the vmlinux load address when generating images.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44983
 2015-03-25 15:34:45 +00:00
Jonas Gorski
d84fafb9f3 brcm63xx: add Livebox 1 firmware image generation 
Currently there isn't images ready for flashing liveboxes boards. This
patch adds a script and the code to call it in the  bcm63xx images
builder makefile to generate the livebox 1 firmware.

I removed some lines to avoid generating unneded files in the bin/ dir
for this board. And added code to generate a squashed rootfs aligned to
64 kB since the current one in the /bin dir is 128 kB aligned and
doesn't work. Still no sysupgrade support for this board. Upgrading from
within openwrt can be done writing with mtd the kernel, and then the 64k
aligned rootfs.

Regards

Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
[jogo: use sed instead of a separate shell script for the boot script, make it
 respect the load address]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44982
 2015-03-25 15:34:40 +00:00
Jonas Gorski
77e3d442b0 brcm63xx: add a dummy image recipe for boards missing proper images 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44981
 2015-03-25 15:34:26 +00:00
Jonas Gorski
02d68c2b57 brcm63xx: drop non-dtb image recipe 
All images generated contain dtbs, so it is now unused.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44980
 2015-03-25 15:34:23 +00:00
Felix Fietkau
fafa3f57e3 kernel: merge upstream bgmac driver improvements 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44978
 2015-03-25 14:30:46 +00:00
Felix Fietkau
68ca1f285c bcm53xx: enable the full-line-of-zero optimization in the cache controller 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44977
 2015-03-25 14:30:40 +00:00
Gabor Juhos
621979b49f kernel: yaffs: use new_sync_{read,write} for 3.18+ 
Using the do_sync_{read,write} functions in conjunction
with the generic_file_{read,write}_iter causes a kernel
panic like this:

  root@OpenWrt:/# mount -t yaffs /dev/mtdblock5 /mnt
  [ 2884.110000] yaffs: dev is 32505861 name is "mtdblock5" rw
  [ 2884.120000] yaffs: passed flags ""
  root@OpenWrt:/# hexdump -vC -n 64 /mnt/kernel
  [ 2902.700000] CPU 0 Unable to handle kernel paging request at virtual \
    address 00000000, epc == 00000000, ra == 80129414
  [ 2902.710000] Oops[#1]:
  [ 2902.710000] CPU: 0 PID: 1030 Comm: hexdump Not tainted 3.18.9 #2
  [ 2902.710000] task: 878e7a20 ti: 868c6000 task.ti: 868c6000
  [ 2902.710000] $ 0   : 00000000 fffffff8 00000000 00000000
  [ 2902.710000] $ 4   : 868c7e70 868c7ea8 00000001 868c7f08
  [ 2902.710000] $ 8   : 00000038 80064f18 80072280 00000000
  [ 2902.710000] $12   : 7fa152b8 7709e3a0 00c42008 7709e3a0
  [ 2902.710000] $16   : 868c7f08 86a46000 00000010 878e7a20
  [ 2902.710000] $20   : 7705c4b0 00000010 00000000 00000000
  [ 2902.710000] $24   : 770960bc 7707dd78
  [ 2902.710000] $28   : 868c6000 868c7e58 7f8e7030 80129414
  [ 2902.710000] Hi    : 00000000
  [ 2902.710000] Lo    : ffffffff
  [ 2902.710000] epc   : 00000000   (null)
  [ 2902.710000]     Not tainted
  [ 2902.710000] ra    : 80129414 do_sync_read+0x7c/0xb4
  [ 2902.710000] Status: 1900dc03 KERNEL EXL IE
  [ 2902.710000] Cause : 00800008
  [ 2902.710000] BadVA : 00000000
  [ 2902.710000] PrId  : 00019750 (MIPS 74Kc)

Change the yaffs code to use the new_sync_{read,write} functions
instead.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 44974
 2015-03-25 08:59:12 +00:00
Rafał Miłecki
8fdd0fb07c kernel: backport rest of bcma patches 
This backports
bcma: allow disabling (not building) PCI driver
Revert "bcma: Kconfig: Let it depend on PCI"

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44970
 2015-03-24 10:39:10 +00:00
Rafał Miłecki
a7724918c9 kernel: mac80211: backport bcma patch renaming IRQ control function 
This backports upstream commit 702131e2a393b45174be326f1dbe20b658b4f157
bcma: move PCI IRQ control function to host specific code

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44969
 2015-03-24 10:38:59 +00:00
Rafał Miłecki
a4d7571367 mark 3.10 targets as broken 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44968
 2015-03-24 10:38:50 +00:00
Jo-Philipp Wich
02e2548b84 x86: use PARTUUID instead explicitly specifying the device by default 
This changes the x86 image generation to match x86_64, using the PARTUUID for
the rootfs instead of explicitly configuring the device.

It unbreaks KVM with VirtIO, which uses /dev/vda2 instead of /dev/sda2.

Tested in QEMU/KVM with VirtIO, VirtualBox and VMware.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 44966
 2015-03-24 10:08:12 +00:00
Felix Fietkau
5d9eeab64a build: remove obsolete references to cris and avr32 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44965
 2015-03-24 10:07:40 +00:00
Jo-Philipp Wich
d830d34b00 x86_64: fix PARTUUID format with leading zeros 
Otherwise the root device won't be found in 1/16 of the generated images
(whenever the signature starts with a zero digit).

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 44959
 2015-03-24 10:06:40 +00:00
Felix Fietkau
2450985de9 avr32: remove target 
It depends on obsolete compilers and only works on one device (an
evaluation board).

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44956
 2015-03-24 10:06:14 +00:00
Rafał Miłecki
3b6c70b7fc kernel: update bcma with most patches from wireless-drivers-next 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44955
 2015-03-24 07:15:31 +00:00
Rafał Miłecki
eb90a6d7d8 kernel: backport fixed_phy_register EXPORT fix from 3.19 
This fixes
ERROR: "fixed_phy_register" [drivers/net/ethernet/broadcom/bgmac.ko] undefined!

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44954
 2015-03-23 18:39:16 +00:00
Imre Kaloz
2375f37723 generic/3.18: refresh patches 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44951
 2015-03-23 13:28:52 +00:00
Imre Kaloz
5be4f2b5b8 mvebu: update mamba dts 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44949
 2015-03-23 12:44:30 +00:00
Felix Fietkau
0a84da0841 bcm53xx: add missing cache controller errata options 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44947
 2015-03-23 10:14:27 +00:00
Felix Fietkau
a6f914d573 bcm53xx: remove linux 3.14 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44946
 2015-03-23 10:14:20 +00:00
Felix Fietkau
e890a3bc9a ramips: make ethernet register map u16 instead of u32 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44940
 2015-03-22 15:11:14 +00:00
Rafał Miłecki
fb6164a377 bcm53xx: add SMP support 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44939
 2015-03-22 15:07:40 +00:00
Nicolas Thill
577da84c25 uml: bump to 3.18 
Signed-off-by: Nicolas Thill <nico@openwrt.org>

SVN-Revision: 44937
 2015-03-22 12:36:57 +00:00
John Crispin
3c0ea6eced au1000: drop 005-fix-cpu-clk.patch 
it has been upstreamed and treackled down with the latest 3.18 update

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44935
 2015-03-22 07:03:02 +00:00
Rafał Miłecki
e0155ad7b0 bcm53xx: add support for Asus RT-AC68U 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44934
 2015-03-22 01:57:15 +00:00
Rafał Miłecki
79c152b56b bcm53xx: fix Asus RT-AC87U magic (even if not used yet) 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44933
 2015-03-22 01:57:10 +00:00
Rafał Miłecki
d324dd4ff3 bcm53xx: backport BCM5301X Netgear R6250/R8000 DT patches 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44932
 2015-03-22 01:57:06 +00:00
Rafał Miłecki
a4523c8e1d bcm53xx: refresh patches 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44931
 2015-03-22 01:56:47 +00:00
John Crispin
35c52bc261 oxnas: remove pre kernel 3.18 support from pinctrl driver 
just some pruning...

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 44923
 2015-03-21 21:47:20 +00:00
John Crispin
3256194aff oxnas: add support for kernel 4.0 
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 44922
 2015-03-21 21:47:03 +00:00
John Crispin
908a82ab61 kernel: add two more missing config symbols 
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 44921
 2015-03-21 21:46:47 +00:00
Felix Fietkau
7d6eec16b6 brcm2708: remove a patch that was added in the stable update (fixes #19253) 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44920
 2015-03-21 21:24:08 +00:00
Felix Fietkau
37912d66c2 ramips: increase NAPI weight for mt7621 to improve routing performance a bit more 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44918
 2015-03-21 12:08:07 +00:00
Rafał Miłecki
ba10454b91 kernel: backport bgmac patches 
This allows dropping some hacky bcm53xx bgmac patch forcing link state.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44917
 2015-03-21 11:45:50 +00:00
Rafał Miłecki
782e432797 bcm53xx: enable FIXED_PHY, we will need it for bgmac 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44916
 2015-03-21 11:45:27 +00:00
Felix Fietkau
db3b862d1c kernel: fix ipsec related regression in the netfilter rtcache patch 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44913
 2015-03-20 22:13:34 +00:00
Imre Kaloz
b95a9f01c1 mvebu: set default regdomain 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44908
 2015-03-20 12:15:40 +00:00
Felix Fietkau
975e1357e6 ramips: fix LAN/WAN MAC address for WSR-600/1166 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44903
 2015-03-20 09:37:07 +00:00
John Crispin
1773aa5163 octeon: add er8 sysupgrade support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44902
 2015-03-20 08:49:08 +00:00
John Crispin
e9b6602a84 octeon: Add MMC support for EdgeRouter ER8 
this is a backport of a series posted on the lmo mailing list

Signed-off-by: Jonathan Thibault <jonathan@navigue.com>

SVN-Revision: 44901
 2015-03-20 08:49:02 +00:00
Felix Fietkau
dac483acb4 ramips: fix WSR-1166 green power LED 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44898
 2015-03-19 21:51:44 +00:00
Michael Büsch
bb81ff2374 omap24xx: Add basic config for linux-4.0 
Also remove 3.3 config. It's broken and unsupported.

SVN-Revision: 44895
 2015-03-19 18:45:32 +00:00
Steven Barth
9b1840b861 ipv6: fix throw routes 
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 44894
 2015-03-19 15:46:03 +00:00
Felix Fietkau
32a6800a41 kernel: remove linux 3.8 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44890
 2015-03-19 11:58:59 +00:00
Felix Fietkau
3600b84cbd ep93xx: moved to targets feed 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44889
 2015-03-19 11:58:54 +00:00
Felix Fietkau
941ac35f77 mpc52xx: moved to targets feed 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44888
 2015-03-19 11:58:48 +00:00
Felix Fietkau
3581298348 mpc83xx: moved to targets feed 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44887
 2015-03-19 11:58:43 +00:00
Felix Fietkau
75e828c117 ar71xx: fix a double dereference in the unaligned access patch 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44885
 2015-03-19 11:58:30 +00:00
Felix Fietkau
2077b18e6b x86_64: remove unused patch 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44884
 2015-03-19 11:58:22 +00:00
Imre Kaloz
e3d19988cf mvebu: add Linux 4.0 support 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44882
 2015-03-19 10:25:44 +00:00
Imre Kaloz
05bf6e0f2e generic/4.0: fix ubi EOF marker patch 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44881
 2015-03-19 10:13:21 +00:00
Imre Kaloz
0d8d48641d generic/4.0: add missing symbols 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44880
 2015-03-19 10:11:20 +00:00
Felix Fietkau
b011293d0b kernel: replace GRO optimization patch with a new one that supports VLANs/bridges with different MAC addresses 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44877
 2015-03-18 18:22:41 +00:00
Felix Fietkau
17afb853ee kernel: bump to 3.14.35, 3.18.9, 3.19.1 and 4.0-rc4 
also refresh generic patches for 3.14, 3.18, 3.19 and 4.0
targets might need a minor refresh as well, however, it looks
like everything still applies cleanly with occasional small
offsets.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 44876
 2015-03-18 18:21:08 +00:00
Jonas Gorski
87568ebeac b53: reverse duplex bit meaning for IMP state override register 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44875
 2015-03-18 10:44:15 +00:00
Felix Fietkau
f30358d41a kernel: remove the netfilter optimization that skips the filter table, it has caused too many issues 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44873
 2015-03-17 17:14:48 +00:00
John Crispin
553528371b ralink: fix mt7621 i2c name 
Signed-off-by: zouxf <fl.service@t-firefly.com>

SVN-Revision: 44868
 2015-03-17 09:44:14 +00:00
John Crispin
29cf72ac07 lantiq/xrx200: cleanup default packages 
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44867
 2015-03-17 09:44:06 +00:00
John Crispin
55a71c1374 ar71xx: adjust OM5P profile for the OpenMesh OM5P-AN board 
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 44866
 2015-03-17 09:43:56 +00:00
John Crispin
10c5a44017 ar71xx: enable sysupgrade for the OpenMesh OM5P-AN 
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 44863
 2015-03-17 09:43:37 +00:00
John Crispin
85cceb5dd0 ar71xx: add user-space support for the OpenMesh OM5P-AN 
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 44862
 2015-03-17 09:43:31 +00:00
John Crispin
17a1e18ee2 ar71xx: add kernel support for the OpenMesh OM5P-AN board 
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 44861
 2015-03-17 09:43:19 +00:00
John Crispin
2a0fcc029f ar71xx: detect GL.iNet model 
There are two versions of the GL.iNet, the 6408A and the 6416A. The only
difference is the flash size.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 44860
 2015-03-17 09:43:13 +00:00
John Crispin
986af9e64e lantiq: make xrx200 targets use the upstream dwc2 driver 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44857
 2015-03-17 09:42:56 +00:00
Felix Fietkau
caf94290ce kernel: add a few more missing config symbols 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44856
 2015-03-17 07:24:51 +00:00
Rafał Miłecki
76811de003 brcm47xx: support SPROM/NVRAM prefixes 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44855
 2015-03-17 07:07:17 +00:00
Rafał Miłecki
917fb76321 brcm47xx: rename (and refresh) MTD patch for safety "nvram" partition 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44854
 2015-03-17 07:07:00 +00:00
Rafał Miłecki
8f63c1405f brcm47xx: switch to 3.18 
Tested on BCM5357B0, BCM47186B0 and BCM4706.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44853
 2015-03-16 23:05:43 +00:00
Rafał Miłecki
7c6f7b716b bcm53xx: switch to 3.18 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44852
 2015-03-16 22:24:56 +00:00