KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
38622 commits 1 branch 0 tags 154 MiB
Commit graph

307 commits

Author SHA1 Message Date
Imre Kaloz
4707123fca mvebu: fixup wifi macs for Linksys boards 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 47820
 2015-12-10 12:13:16 +00:00
Imre Kaloz
5ebd542e37 mvebu: add support for 4.4-rc 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 47819
 2015-12-10 12:11:39 +00:00
Imre Kaloz
b17844d21a mvebu: add support for 4.1 and switch over 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 47818
 2015-12-10 12:08:13 +00:00
Jo-Philipp Wich
08848936dd all: remove redundant board.d/00_model files 
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47753
 2015-12-04 11:07:06 +00:00
Jo-Philipp Wich
527ec2af59 all: remove dummy ucidef_set_interface_loopback() from board.d 
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47744
 2015-12-03 23:13:00 +00:00
Jo-Philipp Wich
9b02e73188 board.d: merge ucidef_add_switch() and ucidef_add_switch_ports() 
This changes uci-defaults-new.sh, config_generate and all relevant board.d
files in order combine ucidef_add_switch() and ucidef_add_switch_ports() into
a single function.

Also removes now superfluous enable and reset arguments.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47721
 2015-12-03 17:30:24 +00:00
Jo-Philipp Wich
fff1a82180 mvebu: switch network and led config defaults to board detection framework 
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47674
 2015-11-30 10:43:31 +00:00
Jo-Philipp Wich
fc64fd8712 Revert "mvebu: migrate led and network setup to board detection framework" 
Roll back the mvebu conversion to board detection code as we need to fix
some strcutural issues first.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47597
 2015-11-22 20:52:10 +00:00
Jo-Philipp Wich
e20b689249 mvebu: migrate led and network setup to board detection framework 
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47541
 2015-11-20 23:59:31 +00:00
Imre Kaloz
8bb23cfb66 mvebu: add support for the Linksys WRT1900ACS (Shelby) 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 47164
 2015-10-08 10:01:30 +00:00
Imre Kaloz
87a70e0774 This had been set in r44508 as a workaround for switch problems. 
Now that the switch driver can handle two devices with
the same MAC address in separate VLANs we can go back
to using the same address on both interfaces.

This is the Linksys firmware's default behavior.

Signed-off-by: Claudio Leite <leitec@staticky.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 46700
 2015-08-21 08:10:48 +00:00
Imre Kaloz
f57484c4af mvebu: fix cobra chainmask 
Thanks Sebastian for spotting it.

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 46697
 2015-08-21 08:01:48 +00:00
Imre Kaloz
20fac016e4 mvebu: add support for the Linksys boot counter 
The u-boot boot counter was never reset after a successful boot,
which sometimes could make some variables become out of sync.
This patch adds support for the boot counter and enables
auto_recovery unconditionally.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 46690
 2015-08-19 08:31:23 +00:00
Jonas Gorski
bed330204a image.mk: move KDIR_TMP definition to a central location 
Instead of each target defining it the same, move the KDIR_TMP
definition to include/image.mk. In addition Image/Build/SysupgradeNAND
already requires KDIR_TMP to be set, so it makes sense to have it
globally defined.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46592
 2015-08-14 10:20:53 +00:00
Jonas Gorski
dbe4173b20 image: fix jffs2(_nand) image generation 
Variables dependend on JFFS2_BLOCKSIZE and NANDBLOCK_SIZE are used
for template generation, so need to be present before inclusion of
image.mk in target image Makefiles.
So move all declarations to before any includes.

Fixes: r42878 ("image.mk: clean up and parallelize mkfs calls")
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46564
 2015-08-05 13:55:52 +00:00
Imre Kaloz
eca9068815 mvebu: update dts files for mamba / WRT1900AC 
Fix for default button states in WRT1900AC dts files.
This prevents overlay wipe when reset is pressed.

Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net>

SVN-Revision: 46530
 2015-07-31 18:23:28 +00:00
Imre Kaloz
d78c7f1765 mvebu: fix gpio config on the WRT1200AC 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 46527
 2015-07-31 18:08:12 +00:00
Hauke Mehrtens
7c7e5c4276 mvebu: make patches apply against 3.18.18 again 
commit r46299 broke the mvebu target because one patch does not apply
any more. This commit closes #20070.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46303
 2015-07-12 10:38:54 +00:00
Jonas Gorski
9a59b350b7 kernel: update 3.18 to 3.18.16 
Changelogs:

* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.15
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.16

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46011
 2015-06-17 09:54:55 +00:00
Imre Kaloz
9fb062cf93 mvebu: make flashing more safe 
Turn on the auto recovery feature when flashing
and turn it off on successful bootup.

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45792
 2015-05-27 19:03:22 +00:00
Imre Kaloz
f1ebb1dddd mvebu: update Linux 4.0 patches 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45762
 2015-05-26 09:31:39 +00:00
Jonas Gorski
76d079204d kernel: update 3.18 to 3.18.14 
Changelogs:

* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.12
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.13
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.14

Build tested on brcm63xx and ipq806x, runtested on brcm63xx.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45711
 2015-05-21 19:32:46 +00:00
Imre Kaloz
c4c4cce190 mvebu: supress useless in-cpu rtc init on the Mamba 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45704
 2015-05-19 22:54:05 +00:00
Imre Kaloz
9d3f24465f mvebu: add xhci phy support 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45629
 2015-05-08 12:12:20 +00:00
Luka Perkov
76330e9b57 mvebu: better integrate xp-gp 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45459
 2015-04-16 13:53:57 +00:00
Imre Kaloz
2705cda813 mvebu: add support for the Linksys Caiman and Cobra 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45456
 2015-04-16 09:54:39 +00:00
Luka Perkov
0926e4c22f mvebu: bring back CONFIG_CPU_THERMAL 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45455
 2015-04-16 00:23:34 +00:00
Luka Perkov
a635c0a04e mvebu: refresh kernel config 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45454
 2015-04-16 00:10:42 +00:00
Luka Perkov
dade4535bb mvebu: fix typo in marvell profile 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45453
 2015-04-15 16:23:20 +00:00
Luka Perkov
a046ce235f mvebu: better integrate 385-ap-db 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45452
 2015-04-15 16:23:10 +00:00
Imre Kaloz
232c61742e mvebu: copy the initramfs files to the bin dir 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45421
 2015-04-13 20:06:47 +00:00
Imre Kaloz
8c684f42e5 mvebu: add support for the in-CPU RTC on the Armada 38x 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45415
 2015-04-13 13:06:34 +00:00
Imre Kaloz
c9e6c7c836 mvebu: add comments to image generation 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45414
 2015-04-13 12:15:40 +00:00
Imre Kaloz
e3bd4f0969 mvebu: stop legacy image generation 
If you can't find the firmware for you board, send proper patches.

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45413
 2015-04-13 12:08:42 +00:00
Imre Kaloz
96c793f529 mvebu: generate a single firmware for the 385-db-ap 
This has been done without having a board, but should work.

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45412
 2015-04-13 12:06:56 +00:00
Imre Kaloz
4da8f96754 mvebu: reflect Armada 38x support in the name 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45411
 2015-04-13 11:30:39 +00:00
Imre Kaloz
ceb7321e13 mvebu: refresh patches 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45401
 2015-04-12 17:30:41 +00:00
Imre Kaloz
b0ad24f0d5 mvebu: migrate mamba support to the upstreamed code 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45400
 2015-04-12 17:29:50 +00:00
Imre Kaloz
6f01238398 mvebu: handle other SKUs as well 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45396
 2015-04-12 15:04:14 +00:00
Imre Kaloz
d1bedfbdf5 mvebu: include the ahci driver in the default profile 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45395
 2015-04-12 15:03:25 +00:00
Imre Kaloz
a62fa2d365 mvebu: reformat the damaged syscfg partition on the mamba 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45386
 2015-04-12 08:35:33 +00:00
John Crispin
6d0ad03fac kernel: remove references to kmod-of-i2c 
these break the IB since the module is part of i2c-core now

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45363
 2015-04-10 13:39:33 +00:00
Imre Kaloz
7a9fe56452 generic/3.18: upgrade to 3.18.11 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45303
 2015-04-07 21:29:26 +00:00
Imre Kaloz
be2d60465d mvebu: disable cpu idle on a38x 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45302
 2015-04-07 21:13:44 +00:00
Imre Kaloz
f60fea1923 Upstream commits 43b68879de27b1993518687fbc6013da80cdcbfe and ce6031c89a35cffd5a5992b08377b77f49a004b9 improve the cpuidle driver on Armada XP. The latter commit improves performance at the slight expense of power consumption. 
Signed-off-by: Claudio Leite <leitec@staticky.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45294
 2015-04-07 18:13:51 +00:00
Imre Kaloz
f079ad97ce mvebu: use CONFIG_MANGLE_BOOTARGS 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45200
 2015-03-31 19:27:59 +00:00
Imre Kaloz
77f322e0d7 mvebu: add missing a38x dts labels 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45199
 2015-03-31 19:23:32 +00:00
Imre Kaloz
35df52f89f generic/3.18: upgrade to 3.18.10 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45197
 2015-03-31 19:21:13 +00:00
Imre Kaloz
b9c4dadc11 mvebu: deal with the new path in the fan control script for Linux 4.0+ 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45195
 2015-03-31 19:12:27 +00:00
Imre Kaloz
f6eff33b8d mvebu: fixup usb3 support on the a38x 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45026
 2015-03-26 14:32:45 +00:00
Imre Kaloz
23b880b373 mvebu: add a coherency fix which didn't make it to -stable, yet 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45024
 2015-03-26 13:52:21 +00:00
Imre Kaloz
af69bf56b6 drop 3.19 support 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45002
 2015-03-26 09:42:59 +00:00
Imre Kaloz
5be4f2b5b8 mvebu: update mamba dts 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44949
 2015-03-23 12:44:30 +00:00
Imre Kaloz
b95a9f01c1 mvebu: set default regdomain 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44908
 2015-03-20 12:15:40 +00:00
Imre Kaloz
e3d19988cf mvebu: add Linux 4.0 support 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44882
 2015-03-19 10:25:44 +00:00
Felix Fietkau
298d67ec7b mvebu: drop linux 3.14 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44828
 2015-03-16 08:29:42 +00:00
Imre Kaloz
fd17ad3d9a mvebu: add backported patch to reenable hw i/o coherency 
Reported-by: Claudio Leite <leitec@staticky.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44621
 2015-03-06 18:57:49 +00:00
John Crispin
d15ac306fa kernel: move KERNFS to generic config 
KERNFS symbol is selected by SYSFS, so place it in generic config.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44615
 2015-03-06 07:56:47 +00:00
John Crispin
f04a268a04 kernel: disable ARCH_NEEDS_CPU_IDLE_COUPLED 
Disable ARCH_NEEDS_CPU_IDLE_COUPLED by-default in generic config, since
only one platfrom (omap) needs them.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44614
 2015-03-06 07:56:34 +00:00
John Crispin
6617845711 kernel: move MTD_SPLIT_SUPPORT to generic config 
CONFIG_MTD_SPLIT_SUPPORT symbol default value is 'y' and many platform
specific configs explicitly enables it, while no one platform disables
this symbol. So place it in generic config and remove from platform
specific configs.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44612
 2015-03-06 07:56:08 +00:00
John Crispin
7886cced18 kernel: remove GENERIC_NET_UTILS from platform configs 
CONFIG_GENERIC_NET_UTILS is selected by CONFIG_NET and already enabled
in generic config, so we don't need this symbol in platform specific
configurations.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44611
 2015-03-06 07:55:57 +00:00
Imre Kaloz
e02478a22a mvebu: set default WRT1900AC switch config 
This sets 'enable_vlan' and thus uses 802.1q
VLANs, but without tagging on either interface.

Signed-off-by: Claudio Leite <leitec@staticky.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44509
 2015-02-23 10:35:29 +00:00
Imre Kaloz
0de48a0dd8 mvebu: set WRT1900AC WAN interface MAC address 
Toggles the LA bit on the WAN interface.

Signed-off-by: Claudio Leite <leitec@staticky.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44508
 2015-02-23 10:33:19 +00:00
Imre Kaloz
29130d39e3 mvebu: refresh 3.18 patches 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44462
 2015-02-16 12:48:05 +00:00
Imre Kaloz
9b1c7a9de4 mvebu: fix WRT1900AC ubinized images 
The current pxa3xx_nand driver doesn't support sub-page writing,
so the VID header offset must be specified explicitly.

Signed-off-by: Claudio Leite <leitec@staticky.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44455
 2015-02-14 22:18:35 +00:00
Luka Perkov
81db848656 targets: base-files: diag.sh does not need to be executable 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44305
 2015-02-07 19:58:58 +00:00
Luka Perkov
92e6e80080 targets: files in uci-defaults do not need to be executables 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44304
 2015-02-07 19:58:52 +00:00
Imre Kaloz
865647cea2 mvebu: add note about the move to single firmware files 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44291
 2015-02-06 11:18:59 +00:00
Imre Kaloz
eda08dd423 mvebu: support building images for a single board 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44290
 2015-02-06 11:16:20 +00:00
Imre Kaloz
12531a0f86 mvebu: don't generate targz images by default 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44268
 2015-02-05 16:31:52 +00:00
Imre Kaloz
66e35c5246 mvebu: Enable the A385 AP on 3.19 
In order for the image to be built, some patches need to be ported to 3.19.

Add the relevant patches. Note that most of them (if not all) should be merged
in 3.20, removing the need to carry them on then.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44267
 2015-02-05 15:41:07 +00:00
Imre Kaloz
9be491f084 mvebu: add Armada 385 DB AP support 
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44266
 2015-02-05 11:34:21 +00:00
Imre Kaloz
3019f7ecbd mvebu: add the Armada 385 Reference Design support 
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44265
 2015-02-05 11:29:56 +00:00
Imre Kaloz
40daf9346e mvebu: fix NAND and NOR options 
All the boards but Mamba had wrong UBI options so far, making it impossible to
flash the built image on their respective storage medium.

Fix all of the supported boards in order to make the generated images useful.

Tested on a Mirabox, an Armada XP GP and an Openblocks AX3, and used the NAND
chip datasheet for the others.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44264
 2015-02-05 11:26:17 +00:00
Imre Kaloz
f14c4e5cff mvebu: add a subprofile for boards based on a small NOR 
Some boards only come with a small NOR on it, where UBI isn't a good solution
because of its overhead.

Add a new subprofile for such boards, that rely on the mtd split framework
instead.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44263
 2015-02-05 11:25:21 +00:00
Imre Kaloz
e46593a54c mvebu: add large NOR sub-profile implementation 
While we supported only the NAND so far, some boards use a large enough NOR,
where UBI is the only reasonable option. Create a new sub-profile template with
a different set of UBI options.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44262
 2015-02-05 11:24:10 +00:00
Imre Kaloz
80cfe34291 mvebu: Add sub-profiles 
In order to support the various board NAND layout that we support, introduce a
sub-profile similar to the one used by ar71xx.

These subprofiles provide a default implementation for most of the building
functions, while allowing each sub-profile to override any of these operations
in order to have a more specific behaviour, like Mamba expects for example.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44261
 2015-02-05 11:22:43 +00:00
Imre Kaloz
67b91f47d6 mvebu: Add MTD split framework support 
We're going to need the MTD split related options for our NOR support.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44259
 2015-02-05 11:14:53 +00:00
Imre Kaloz
7be967e954 mvebu: temporary el cheapo' fan control script 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44153
 2015-01-26 20:41:43 +00:00
Jo-Philipp Wich
0798de785e mvebu: add missing config symbol 
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 44147
 2015-01-25 22:17:43 +00:00
Imre Kaloz
9a8a348f14 mvebu: use pwmfan in the profile 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44131
 2015-01-25 15:52:28 +00:00
Imre Kaloz
18012a4198 mvebu: preliminary 3.19 support 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44130
 2015-01-25 15:37:31 +00:00
Imre Kaloz
d9c6ff8c25 mvebu: gpio based pwm support 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44129
 2015-01-25 15:36:47 +00:00
Imre Kaloz
9a172c70eb mvebu: update mamba dts 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44128
 2015-01-25 15:26:33 +00:00
Imre Kaloz
afa58d8589 mvebu: backport some upstream changes 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44127
 2015-01-25 15:25:14 +00:00
Imre Kaloz
8a103d5c56 mvebu: fixups for the new driver 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43978
 2015-01-16 08:44:15 +00:00
Imre Kaloz
9a8bf84879 mvebu: add the new tlc59116 driver and migrate the Mamba to it 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43975
 2015-01-15 13:59:01 +00:00
Imre Kaloz
a72bf9f3d2 mvebu: Switch to the generic mkuimage macro 
The mvebu image makefile define something almost identical to the generic
implementation found in include/image.mk.

Switch to this implementation.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

SVN-Revision: 43969
 2015-01-14 11:39:20 +00:00
Imre Kaloz
91b79128dc mvebu: Replace the padjffs2 call by the generic definition 
The mvebu image Makefile directly calls the padjffs2 utility, while there's an
generic make function to do just that. Switch to it

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

SVN-Revision: 43968
 2015-01-14 11:37:29 +00:00
Imre Kaloz
b0a2d7ad0d now that the driver knows it, use the 88e6172's switch type in the mamba dts 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43945
 2015-01-12 09:32:33 +00:00
Luka Perkov
a1872182bb mvsw6171: rename to 'mvsw61xx' 
In preparation for properly supporting switches
beyond the 88E6171.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43935
 2015-01-11 17:19:58 +00:00
Imre Kaloz
7f21a92ffa switch to 3.18 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43893
 2015-01-09 12:36:07 +00:00
Imre Kaloz
26b57a6dc2 refresh kernel config, add cpuidle and cpufreq support 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43855
 2015-01-05 15:08:20 +00:00
Imre Kaloz
bfa1f18bfb enable swconfig and the mvsw6171 driver 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43854
 2015-01-05 15:02:18 +00:00
Imre Kaloz
5ed3a7aeb3 add tmp421 to the device tree instead of relying on autodetect 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43825
 2015-01-04 17:26:07 +00:00
Imre Kaloz
f12a0f4308 enable wpad-mini by default 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43801
 2014-12-31 21:59:07 +00:00
Imre Kaloz
edbb903461 fix mvneta vlan tagging 
This is a 3.14.x backport of:
"mvneta: Fix TSO and checksum for non-acceleration vlan traffic"

Upstream commits:

817dbfa5d1bc276a72c1a577310382008e8aca0a
2d39d120781a5770573dc6ed672a5a562f541aea

Fixes vlan tagging on SoC interfaces for the WRT1900AC.  Useful
when using mvsw6171 driver.

Signed-off-by: Mark Milburn <mark.a.milburn@gmail.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43781
 2014-12-26 14:48:33 +00:00
Imre Kaloz
e23b988bf5 only call UbinizeImage and BuildSysUpgrade for boards we support them on 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43779
 2014-12-26 13:45:18 +00:00
Imre Kaloz
f3755f5758 The ubinized filesystems should be used for generating the final images, so store them in KDIR instead. 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43778
 2014-12-26 13:33:22 +00:00
Imre Kaloz
5744500ab6 we've changed places with Luka, reflect that :) 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43774
 2014-12-25 22:34:15 +00:00
Imre Kaloz
2bff4ca7b1 use mwlwifi by default 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43773
 2014-12-25 22:29:29 +00:00
John Crispin
019ea725aa add "preinit_regular" diag.sh set_state argument 
This new argument is used right after starting regular preinit (which
happens if failsafe wasn't triggered). The main purpose of "preinit"
argument is to indicate that failsafe can be triggered, however we were
missing a way to inform user that we don't wait for a trigger anymore.
With this change it's clear when failsafe mode can be triggered.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43715
 2014-12-15 10:37:00 +00:00
Luka Perkov
a1da38f7b1 kernel: drop CONFIG_PROC_DEVICETREE in 3.18 
This option was removed in upstream commit 8357041.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43607
 2014-12-10 18:55:53 +00:00
Felix Fietkau
9a495f6bbb kernel: refresh patches 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43564
 2014-12-08 12:04:25 +00:00
Imre Kaloz
f3df3bdb26 add initial 3.18 support 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43366
 2014-11-24 16:00:41 +00:00
Felix Fietkau
c288d2d6d9 kernel: makefiles: make use of new var KERNEL_PATCHVER 
replace all occurences of LINUX_VERSION with the cleaner
approach. future kernel upgrades must mostly touch only
one file. the only platform left is netlogic, because it
uses a intermediate kernel 3.14.16

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 43047
 2014-10-24 19:34:02 +00:00
Felix Fietkau
f35da063bc targets: remove useless quotes around KERNELNAME 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42780
 2014-10-05 20:17:19 +00:00
Luka Perkov
02629d8f87 kernel: update 3.14 to 3.14.18 
Targets were build tested and patches are refreshed.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42463
 2014-09-10 21:40:19 +00:00
Luka Perkov
dd8d729096 kernel: update 3.14 to 3.14.16 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42070
 2014-08-08 13:38:22 +00:00
Luka Perkov
f548b18353 kernel: update 3.14 to 3.14.14 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 41898
 2014-07-30 15:44:44 +00:00
John Crispin
7d8f187201 target/linux/*/image/Makefile: use new dts path variable 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41791
 2014-07-21 18:42:06 +00:00
Imre Kaloz
d7ae7bae57 mark the default WRT1900AC image "factory" 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41648
 2014-07-14 15:02:38 +00:00
Imre Kaloz
6f5a9debed handle sysupgrade tar files on the WRT1900AC 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41647
 2014-07-14 15:00:36 +00:00
Imre Kaloz
1d11ffa4f2 use the full boardname for the wrt1900ac image 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41631
 2014-07-13 22:15:03 +00:00
Imre Kaloz
81d85a717a add sysupgrade support 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41630
 2014-07-13 22:12:56 +00:00
Imre Kaloz
88121f229c update wrt1900ac dts 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41629
 2014-07-13 22:11:43 +00:00
Luka Perkov
a145a22f66 kernel: update 3.14 to 3.14.12 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 41582
 2014-07-11 13:28:44 +00:00
Imre Kaloz
811d1682b8 enable handling of the wan led on the WRT1900AC 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41555
 2014-07-10 10:19:06 +00:00
Luka Perkov
90b53991a0 kernel: update 3.14 to 3.14.11 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 41551
 2014-07-08 22:44:34 +00:00
Luka Perkov
354a1042cc kernel: update 3.14 to 3.14.10 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 41533
 2014-07-06 18:10:49 +00:00
Imre Kaloz
b7b222279c set led triggers for the Linksys WRT1900AC 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41436
 2014-07-01 09:45:41 +00:00
Imre Kaloz
6fa01eab80 adjust default profile, and add an evalboard one 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41435
 2014-07-01 09:43:38 +00:00
Imre Kaloz
9ff59c7656 drop unneeded file 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41433
 2014-07-01 09:35:22 +00:00
Luka Perkov
26b06940a9 mvebu: drop 3.10 support 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 41406
 2014-06-29 23:29:57 +00:00
Imre Kaloz
1cebada22b fix the WPS button's GPIO number on the mamba 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41392
 2014-06-29 21:26:01 +00:00
Imre Kaloz
6e59193e88 upgrade to Linux 3.14.9 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41388
 2014-06-29 13:11:57 +00:00
Imre Kaloz
3e4932758e build firmware images for the Mamba (Linksys WRT1900AC) 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41387
 2014-06-29 13:10:35 +00:00
Imre Kaloz
0bc385d064 set nand and squashfs features 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41386
 2014-06-29 13:09:15 +00:00
Imre Kaloz
b2e9df4de3 add uboot-envtools by default 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41385
 2014-06-29 13:06:48 +00:00
Imre Kaloz
974f13988c handle the dual-firmware layout on the WRT1900AC 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41384
 2014-06-29 13:03:55 +00:00
Imre Kaloz
d59f68531b use the power led on the WRT1900AC for status reporting 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41383
 2014-06-29 12:53:09 +00:00
Imre Kaloz
2c06f05236 fixup mac addresses on the WRT1900AC 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41382
 2014-06-29 12:51:39 +00:00
Imre Kaloz
f953ed4ffb automatically generate network config 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41381
 2014-06-29 12:50:12 +00:00
Imre Kaloz
38f596d8f4 update mamba dts 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41379
 2014-06-29 11:44:58 +00:00
Imre Kaloz
4fe76889c0 update config for 3.14 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41361
 2014-06-27 20:38:42 +00:00
Imre Kaloz
75083c6e68 build squashfs on ubi and SysupgradeNAND images 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41360
 2014-06-27 13:00:25 +00:00
John Crispin
994e5ce2f9 kernel: update 3.10.36->3.10.44 
205-fix-headers_install.patch is obseleted by upstream commit 3246a0352e3d58380b9386570f1db1faf7edf8a8

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41351
 2014-06-26 13:47:42 +00:00
Luka Perkov
cb3d5242ca mvebu: drop preinit script 
The /lib/mvebu.sh script can now handle this task.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 41341
 2014-06-26 10:21:32 +00:00
Imre Kaloz
643a8a626d update mamba dts 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41292
 2014-06-20 23:05:23 +00:00
Imre Kaloz
f11de38d44 make script executable, add WRT1900AC detection 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41291
 2014-06-20 22:35:09 +00:00
Imre Kaloz
a241853358 define the power led for the WRT1900AC 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41288
 2014-06-20 19:13:01 +00:00
Luka Perkov
5e6024d526 mvebu: be consistent with kernel config file names 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 41240
 2014-06-17 21:04:45 +00:00
Imre Kaloz
85812e21f9 add dummy fixup for 3.10 
SVN-Revision: 41234
 2014-06-17 15:14:02 +00:00
Imre Kaloz
ac91824b36 build images for the WRT1900AC 
SVN-Revision: 41233
 2014-06-17 15:13:33 +00:00
Imre Kaloz
d775e4ef00 preliminary support for the WRT1900AC (work in progress) 
SVN-Revision: 41232
 2014-06-17 15:13:10 +00:00
Gabor Juhos
d2812cb036 kernel: update 3.10 to 3.10.36 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40467
 2014-04-12 11:59:07 +00:00
Gabor Juhos
627baa28d3 kernel: update 3.10 to 3.10.34 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40291
 2014-03-27 09:28:33 +00:00
Gabor Juhos
f677b1bc7e kernel: update 3.10 to 3.10.32 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39707
 2014-02-23 10:59:40 +00:00
Luka Perkov
4fd88fa081 mvebu: enable NAND controller support 
Signed-off-by: Seif Mazareeb <seif.mazareeb@gmail.com>

SVN-Revision: 39569
 2014-02-11 02:16:04 +00:00
Luka Perkov
26e8e630ef mvebu: add support for the Armada XP GP board (DB-MV784MP-GP) 
This Armada XP GP board from Marvell comes with:

* 2GB DDR3 DIMM
* 1GB NAND flash (8-bit interface)
* 16MB NOR flash (16-bot interrface)
* 16MB SPI flash
* SDIO module
* 3 PCIe
* 1 SATA link
* 2 USB EHCI
* 1 internal SSD
* 4 Ethernet Gigabit
* 1 RS232 port over USB

Signed-off-by: Seif Mazareeb <seif.mazareeb@gmail.com>

SVN-Revision: 39568
 2014-02-11 02:07:47 +00:00