Commit graph

1416 commits

Author SHA1 Message Date
John Crispin
21dc3a7b94 danube gpio clean up
SVN-Revision: 9741
2007-12-13 22:28:15 +00:00
John Crispin
279d7f707d danube gpio cleanup
SVN-Revision: 9740
2007-12-13 21:27:12 +00:00
John Crispin
0b9ea77b88 danube gpio cleanup
SVN-Revision: 9739
2007-12-13 21:18:28 +00:00
John Crispin
23e44079dc add original danube gpio driver ... already did some minor cleanup
SVN-Revision: 9738
2007-12-13 21:10:25 +00:00
Felix Fietkau
fa9710c7ee fix imagebuilder compile
SVN-Revision: 9736
2007-12-13 21:04:21 +00:00
John Crispin
4545e6f507 danube led cleanup
SVN-Revision: 9734
2007-12-13 21:00:03 +00:00
John Crispin
31857f702b danube led cleanup
SVN-Revision: 9733
2007-12-13 20:51:57 +00:00
John Crispin
390c117899 danube led cleanup
SVN-Revision: 9732
2007-12-13 20:29:22 +00:00
John Crispin
616ac2457d add original danube led driver
SVN-Revision: 9731
2007-12-13 20:22:27 +00:00
John Crispin
5ff1f06f1f cleanup danube watchdog timer
SVN-Revision: 9730
2007-12-13 20:02:52 +00:00
John Crispin
0e17a20d79 cleanup danube watchdog timer
SVN-Revision: 9729
2007-12-13 19:55:14 +00:00
John Crispin
9e85885aea cleanup danube watchdog timer
SVN-Revision: 9728
2007-12-13 19:45:28 +00:00
John Crispin
82f0d72664 initial merge of danube wdt code
SVN-Revision: 9727
2007-12-13 19:20:12 +00:00
Felix Fietkau
0f0a49c98f add atheros reset button fixes from #2774
SVN-Revision: 9721
2007-12-13 05:14:47 +00:00
Gabor Juhos
fa10728685 use a shadow value for the write-only GPIO_CONF2 register
SVN-Revision: 9715
2007-12-12 12:42:40 +00:00
Gabor Juhos
ed7a8ab036 use the right irq_handler in the CF driver
SVN-Revision: 9714
2007-12-12 10:53:49 +00:00
Gabor Juhos
a6a8cb6a55 fix mac address setup on RouterBOARDs
SVN-Revision: 9713
2007-12-12 08:43:41 +00:00
Jens Muecke
a3d681bba5 Removing Grub for olpc (unnecessary) Adding Bootscript Some SD-Card fixes Config changes
SVN-Revision: 9712
2007-12-12 01:46:24 +00:00
Felix Fietkau
8b4ba82c0e remove an unused #include statement that is causing compile issues on osx
SVN-Revision: 9711
2007-12-12 00:11:22 +00:00
Gabor Juhos
224aaf34ac enable wait state pin for the CF slot on the RB153 board
SVN-Revision: 9709
2007-12-11 17:59:42 +00:00
Gabor Juhos
7afab49bc7 RB153 CF driver fixes
SVN-Revision: 9708
2007-12-11 16:46:55 +00:00
Gabor Juhos
bb6c1aa770 new experimental driver for the CF slot on the RouterBOARD 153
SVN-Revision: 9707
2007-12-11 09:00:06 +00:00
Florian Fainelli
71f1ca2cba Replace deprecated DEBUG config symbol
SVN-Revision: 9706
2007-12-11 08:30:48 +00:00
John Crispin
6e2b3bc158 added CONFIG_DANUBE_PCI_HW_SWAP
SVN-Revision: 9705
2007-12-10 20:26:15 +00:00
John Crispin
f02869b17a initial merge of danube, pci is still broken and the new dma code still needs to be tested, before the merge
SVN-Revision: 9704
2007-12-10 20:00:55 +00:00
Gabor Juhos
9b9b83976c add support for GPIO IRQs
SVN-Revision: 9700
2007-12-10 14:05:01 +00:00
Florian Fainelli
cf1c2554e7 Enable SSB ohci driver (#2828)
SVN-Revision: 9699
2007-12-10 10:14:53 +00:00
Florian Fainelli
0d88baa016 Disable CONFIG_NETDEVICES_MULTIQUEUE for ar7 until we fix the race condition
SVN-Revision: 9698
2007-12-10 09:56:44 +00:00
Felix Fietkau
93575b53a7 Use $(CP) instead of $(INSTALL_BIN) for binaries.
Signed-off-by: Andy Boyett <agb-openwrt@padded-cell.net>

SVN-Revision: 9694
2007-12-09 18:53:06 +00:00
Felix Fietkau
882f3e78ca suppress bug after compiling last package in kamikaze SDK.
This patch corrects https://dev.openwrt.org/ticket/2508
An error was raised when no Config.in file was found in package/
Signed-off-by: Julien Pinon <julien.pinon@luceor.com>

SVN-Revision: 9692
2007-12-09 18:52:52 +00:00
Florian Fainelli
a86b7992f9 Forgot removing that file while applying patch from #2757
SVN-Revision: 9690
2007-12-09 17:52:27 +00:00
Florian Fainelli
17bd097fcc Add bcm5354 patches from #2757
SVN-Revision: 9685
2007-12-09 16:11:52 +00:00
Florian Fainelli
dc36fccfdc Add bcm5354 patch from #2754
SVN-Revision: 9684
2007-12-09 15:51:45 +00:00
Florian Fainelli
ab883d42a1 Fix missing return
SVN-Revision: 9683
2007-12-09 15:15:32 +00:00
Florian Fainelli
d37e090fe9 Setup MAC addresses for routerboards
SVN-Revision: 9682
2007-12-09 14:43:42 +00:00
Tim Yardley
2efb83ebcb bump kernel to 2.6.23.9 for x86
SVN-Revision: 9675
2007-12-08 15:53:05 +00:00
Tim Yardley
59a715fdd5 updated layer7 to 2.15.. current is 2.16.1, i might bump again, this has been uncommitted for a bit
SVN-Revision: 9674
2007-12-08 15:52:26 +00:00
Rod Whitby
06b6aaae20 ixp4xx: Rename fsg3 subtarget to harddisk to better reflect the intention of the subtarget
SVN-Revision: 9670
2007-12-07 22:30:56 +00:00
Rod Whitby
610fcbfd85 ixp4xx: Split into two subtargets, one normal and one for boards which boot directly from attached storage (and therefore need most kernel modules compiled in)
SVN-Revision: 9669
2007-12-07 22:29:44 +00:00
Felix Fietkau
691be1ebe3 add missing kernel config symbol
SVN-Revision: 9668
2007-12-07 19:24:16 +00:00
Felix Fietkau
eeebde136d Minor patch to the AR7 diag.sh to make the status LED a bit more useful. From the patch:
This setup gives us 3.5 distinguishable states:

- Solid OFF:  Bootloader running, or kernel hung (timer task stalled)
- Solid ON:   Kernel hung (timer task stalled)
- 5Hz blink:  preinit
- Heartbeat:  normal operation

Signed-off-by: oliver@opencloud.com

SVN-Revision: 9666
2007-12-07 00:03:14 +00:00
Felix Fietkau
f648fc7bc0 Reimplement rx ring with EOQ markers to avoid reset storms
Signed-off-by: oliver@opencloud.com

SVN-Revision: 9665
2007-12-07 00:03:10 +00:00
Felix Fietkau
6111ac6f94 Fix race between device reset and start_xmit
Signed-off-by: oliver@opencloud.com

SVN-Revision: 9664
2007-12-07 00:03:06 +00:00
Gabor Juhos
5a9fed951a add copyright header to the USB driver's files
SVN-Revision: 9657
2007-12-05 09:32:04 +00:00
Felix Fietkau
5dc134c542 Fix VLYNQ device enable for DG834Gv1
This patch allows VLYNQ devices on the DG834Gv1 to be successfully
enabled.

Currently the "__vlynq_enable_device" function attempts to set the VLYNQ
device clock divisor to values from 1 through 8 until a link is
successfully established. On the DG834Gv1 (but not the DG834Gv2),
setting the VLYNQ device clock divisor to 1 (full rate) results in all
further VLYNQ operations failing (including software reset), so the
device is never enabled. This patches changes the function to only
attempt divisors 2 through 8, and hence the device is successfully
enabled.

Signed-off-by: Nick Forbes <nick.forbes@huntsworth.com>

---------

SVN-Revision: 9656
2007-12-04 12:49:54 +00:00
Gabor Juhos
bb44c9a6de switch to 2.6.23.9
SVN-Revision: 9629
2007-11-29 08:51:59 +00:00
Travis Kemen
38101a0cdc add support for the PCEngines Alix
SVN-Revision: 9611
2007-11-28 04:07:24 +00:00
Travis Kemen
be9bf2bf40 add txpower patches and add uci configuration file From: Vasilis T. (aka Acinonyx)
SVN-Revision: 9610
2007-11-28 03:44:18 +00:00
Felix Fietkau
0795035b35 ps3: use readable video mode descriptions in readme
The ps3 video modes can be specified as readable names (eg "720p"), so
use those instead.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>

SVN-Revision: 9605
2007-11-28 02:36:06 +00:00
Felix Fietkau
c690518fea ps3: build-in ps3 system manager
This changes the ps3 kernel config to build-in the System Manager
module, which is required for proper shutdown and reboot.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>

SVN-Revision: 9604
2007-11-28 02:36:03 +00:00