KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
33978 commits 1 branch 0 tags 154 MiB
Commit graph

1444 commits

Author SHA1 Message Date
John Crispin
1f26091242 ramips: HLK-RM04 - Remove power LED config 
The power LED on the HLK-RM04 is hard wired to the power bus and is not under GPIO control, remove the bogus config for it.
(Note that GPIO0 is actually connected to the RESET button.)

Signed-off-by: John Clark <inindev@gmail.com>

SVN-Revision: 48662
 2016-02-08 08:26:02 +00:00
Felix Fietkau
afdb24e3ae ramips: add IMAGE_SIZE to DEVICE_VARS, it is used by build templates 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48611
 2016-02-01 17:41:29 +00:00
Felix Fietkau
705ddc9bb9 ramips: make tp-link firmware size errors non-fatal 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48526
 2016-01-28 14:13:01 +00:00
Felix Fietkau
81e8e02289 ramips: fix image size checks for Buffalo WSR-1166 and WSR-600 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48508
 2016-01-26 16:45:11 +00:00
Hauke Mehrtens
a29c7ca3d9 kernel: update kernel 4.3 to version 4.3.4 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48498
 2016-01-25 21:44:48 +00:00
Felix Fietkau
57776e68ce base-files: remove default /etc/config/network, generate it via board.d instead 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48493
 2016-01-25 16:30:41 +00:00
Felix Fietkau
6f8d647778 ramips: re-enable highmem support for MT7621 now that it's fixed 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48469
 2016-01-24 00:16:32 +00:00
John Crispin
f51f92d7e9 ramips: fix serial baudrate for final version of ZBT-WG2626 board 
The bootloader was updated and now uses 115200 instead of 57600 baud
for the serial console. Change this also in OpenWrt's DTS, so the rate
is consistent for bootloader and linux kernel output.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 48359
 2016-01-19 10:16:30 +00:00
John Crispin
9f7bbc649c ramips: HiLink HLK-RM04 image name typo (RM02 -> RM04) 
The image name for the HiLink HLK-RM04 module has a typo and should read "RM04" rather than "RM02"

Signed-off-by: John Clark <inindev@gmail.com>

SVN-Revision: 48355
 2016-01-19 10:15:44 +00:00
Felix Fietkau
3c3fb1dfc0 ramips: delete the broken sound driver 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48318
 2016-01-18 13:40:15 +00:00
Felix Fietkau
63aa7023d8 ramips: mark kmod-sound-mtk as broken, it does not compile properly 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48317
 2016-01-18 13:22:38 +00:00
Felix Fietkau
fa61e3fbba ramips: fix kernel config handling for mt7620/mt7628 sound module 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48316
 2016-01-18 13:22:34 +00:00
Hauke Mehrtens
cdb83aaf5f kernel/4.3: update to version 4.3.3 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de

SVN-Revision: 48224
 2016-01-12 20:52:19 +00:00
Felix Fietkau
471a567a88 ramips: do not rely on $(BIN_DIR) installed files during image build (for ubnt-erx) 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48147
 2016-01-06 18:39:13 +00:00
Felix Fietkau
2499a57d92 targets: add kernel image dependencies on device tree files 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48146
 2016-01-06 18:39:06 +00:00
Felix Fietkau
947eac1803 ramips: do not attempt to build ubnt-erx initramfs image if initramfs support is disabled 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48144
 2016-01-06 18:38:44 +00:00
Felix Fietkau
56608a777e ramips: fix duplicate /dts-v1/ line for WRTNODE2 
Signed-off-by: Noble Pepper <openwrtmail@noblepepper.com>

SVN-Revision: 48138
 2016-01-06 00:04:14 +00:00
Felix Fietkau
48a57b1ead ramips: set mips16 support 
Signed-off-by: Cristian Morales Vega <cristian@samknows.com>

SVN-Revision: 48131
 2016-01-04 22:35:36 +00:00
John Crispin
e85230ce2e ralink: add a few mt7688 fixes that got lost in the v4.3 bump 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 48115
 2016-01-04 14:21:24 +00:00
John Crispin
eb9fccc440 ralink: update the usb phy driver to the version sent upstream 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 48114
 2016-01-04 14:21:17 +00:00
John Crispin
9b675a2a33 ralink: fix USB compatible strings 
switch to the upstream compatible strings for ehci and ohci support.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 48113
 2016-01-04 14:21:11 +00:00
Felix Fietkau
c69ffda546 ramips: clean up and refresh kernel patches 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48070
 2016-01-02 14:48:27 +00:00
Felix Fietkau
140be9f1a5 ramips: fix performance counters on mt7621 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48069
 2016-01-02 14:48:11 +00:00
John Crispin
fb2d204ce4 ralink: more esw_rt3050 fixes 
the IRQ was not setup properly causing an oops

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 48064
 2016-01-02 11:44:08 +00:00
John Crispin
6ca6a98622 ramips: Remove LED GPIO definitions in MQmaker WiTi device tree 
LED's were defined wrong in the device tree file, they are hardware driven because they are connected directly to the switch chip and wireless chips respectively, thus no GPIO addresses are assigned to them. It is safe to remove them from the device tree file to stop confusion.

Signed-off-by: Sebastian Careba <nitroshift@yahoo.com>

SVN-Revision: 48055
 2016-01-01 21:20:54 +00:00
John Crispin
de7dce21a3 ralink: add WRTnode2 platform and led support 
Signed-off-by: xzmu <xzmu@wrtnode.com>

SVN-Revision: 48049
 2016-01-01 21:19:50 +00:00
John Crispin
6b95386fd3 ralink: fix rt3050/5350 ethernet switch support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 48030
 2016-01-01 21:17:21 +00:00
Felix Fietkau
c55d8d4253 ramips: set the wifi mac address to the same as LAN on witi 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48029
 2016-01-01 18:58:02 +00:00
Felix Fietkau
eaf8889cf8 ramips: add a script to fix up the broken mac address on the witi board 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48027
 2016-01-01 18:57:39 +00:00
Felix Fietkau
46519964ff kernel: fold of_get_mac_address_mtd into of_get_mac_address 
This makes it easier to keep drivers in sync with upstream

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48026
 2016-01-01 18:57:29 +00:00
Felix Fietkau
22693a9086 ramips: fix kernel configuration for mt7628 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48025
 2016-01-01 15:20:38 +00:00
Felix Fietkau
f3bbb73a20 ramips: add missing clk_round_rate function to fix buildbot errors 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48024
 2016-01-01 14:33:09 +00:00
Felix Fietkau
28ec4e0e71 ramips: fix inverted LEDs for RE6500 
Signed-off-by: Bjoern Dobe <bjoern@dobecom.de>

SVN-Revision: 48022
 2016-01-01 12:27:45 +00:00
Felix Fietkau
2c4faaed74 ramips: add mac address assignment for eth0 on RE6500 
Signed-off-by: Bjoern Dobe <bjoern@dobecom.de>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48021
 2016-01-01 12:26:38 +00:00
Felix Fietkau
d65eda48b7 ramips: fix firmware partition size 
Signed-off-by: Bjoern Dobe <bjoern@dobecom.de>

SVN-Revision: 48020
 2016-01-01 12:26:30 +00:00
Felix Fietkau
11c697015f ramips: fix memory size for RE6500 
Signed-off-by: Bjoern Dobe <bjoern@dobecom.de>

SVN-Revision: 48019
 2016-01-01 12:26:26 +00:00
Felix Fietkau
3e807886d0 ramips: disable NAND device in mt7621.dtsi to fix boot errors on many devices 
Enable it from .dts files that need it, also remove redundant properties

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47936
 2015-12-19 11:07:29 +00:00
Felix Fietkau
32877b31dc ramips: update DTS files to use jedec,spi-nor compatible string for m25p80 to fix probe issues 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47935
 2015-12-18 22:26:40 +00:00
John Crispin
4afe0fc2b2 ralink: update the mt7621 ethernet support patch 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 47929
 2015-12-17 12:14:56 +00:00
John Crispin
7de7bd0201 ramips: mt7621: fix error message when initramfs is too large 
Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>

SVN-Revision: 47908
 2015-12-17 09:27:09 +00:00
John Crispin
1c5136c4c3 ramips: remove unwanted change from patch 
Remove unwanted change to irq-mips-gic.c from mt7621 support patch

Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>

SVN-Revision: 47907
 2015-12-17 09:27:00 +00:00
John Crispin
43422a634b ramips: change CM_GCR_BASE_CMDEFTGT_MEM value to match datasheet 
Zero config value for default memory region means 'memory', not
not 'disabled' according to 'Control Registers Of The Coherency
Manager' manual.

Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>

SVN-Revision: 47906
 2015-12-17 09:26:51 +00:00
John Crispin
acbed0eff3 ramips: mt7621: undo mips-cm probe hack to not wipe out memory regions 
Since now we hopefully setup memory regions properly we no longer need this hack.

Tested and works on ubnt-erx.

Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>

SVN-Revision: 47905
 2015-12-17 09:26:43 +00:00
John Crispin
622e268710 ramips: mt7621: setup memory region for pcie controller memory 
Only compile tested since I do not have any hardware with
devices on pcie bus.

Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>

SVN-Revision: 47904
 2015-12-17 09:26:35 +00:00
John Crispin
e8890c6be0 ramips: mt7621: add patch to setup CM memory region for palmbus 
This is tested and works on ubnt-erx.

Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>

SVN-Revision: 47903
 2015-12-17 09:26:28 +00:00
John Crispin
b4bb10b3a0 ralink: update config files to build the cleaned up ethernet driver 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 47902
 2015-12-17 09:26:20 +00:00
John Crispin
402db12f1a ralink: drop dummy profile from mt7688 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 47901
 2015-12-17 09:26:09 +00:00
John Crispin
651e620de5 ralink: fixup devicetree files to work with new ethernet driver 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 47900
 2015-12-17 09:25:57 +00:00
John Crispin
fa854a02a1 ralink: drop old ethernet driver 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 47899
 2015-12-17 09:25:30 +00:00
John Crispin
31116661ff ralink: add reworked ethernet driver 
update to the version of the driver that is on its way upstream

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 47898
 2015-12-17 09:25:24 +00:00