KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
23486 commits 1 branch 0 tags 154 MiB
Commit graph

9816 commits

Author SHA1 Message Date
Florian Fainelli
25475a095e mvebu: add inital support for Marvell Armada XP/370 SoCs 
This brings in the initial support for the Marvell Armada XP/370 SoCs.
Successfully tested on RD-A370-A1 and DB-MV784MP-GP boards the following
interfaces:

- Ethernet
- SDIO
- GPIOs
- SATA

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35058
 2013-01-08 22:20:16 +00:00
Florian Fainelli
97acd10458 add support for 3.8 kernel 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35057
 2013-01-08 22:20:11 +00:00
Florian Fainelli
9b601b79d0 add support for 3.8 kernel 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35056
 2013-01-08 22:20:06 +00:00
Florian Fainelli
8dbed04ec9 kernel: add support for 3.8-rc2 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35055
 2013-01-08 22:19:31 +00:00
Hauke Mehrtens
7b0af8193b brcm47xx: BGMAC Driver corrections 
1) Fix what appears to be a logic error in bgmac_phy_advertise.

2) Fix bgmac_ioctl to use passed phy_id; needed for switch-robo
interface w/ the driver to work correctly.  I still have the issue
with the interface always being HD when the speed/duplex is set
manually (e.g., echo "100FD" > /proc/switch/eth0/port/N/media).

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 35052
 2013-01-07 22:51:39 +00:00
Florian Fainelli
4ec57bdc06 update to 3.7 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35045
 2013-01-07 18:16:36 +00:00
Gabor Juhos
ba4de984b9 ar71xx: disable PHY_SWAP and PHY_ADDR_SWAP bits on TL-WR703N/MR3020/MR3040/MR11U boards 
The PHY_SWAP and PHY_ADDR_SWAP bits are initialized
differently by different versions of the bootloader.
This leads to broken ethernet connection with OpenWrt
on some boards.

Turn both SWAP bits OFF on these boards to make it
consistent regardless of the bootloader used.

Based on a patch by Michel Stempin <michel.stempin@wanadoo.fr>.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35037
 2013-01-07 14:30:37 +00:00
Gabor Juhos
251e4608b0 ar71xx: add missing Makefile entry to the 74HC153 GPIO patch 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35035
 2013-01-07 14:14:41 +00:00
Felix Fietkau
5154270694 orion: debloat the kernel some more 
SVN-Revision: 35023
 2013-01-06 15:09:47 +00:00
Felix Fietkau
75657ff8a9 kernel: add missing config symbol 
SVN-Revision: 35021
 2013-01-06 15:09:39 +00:00
John Crispin
f2f9332350 adds support for Edimax BR-6524N 
fixes #12754

Signed-off-by: <rq@akl.lt>

SVN-Revision: 35020
 2013-01-06 11:11:42 +00:00
John Crispin
d5d2e8b4db missing underscore in 3.3 regmap patch 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 35018
 2013-01-06 10:01:53 +00:00
Felix Fietkau
2e8409cce3 kernel: port the regmap fix to 3.6 (#12749), refresh patches for other versions 
SVN-Revision: 35016
 2013-01-05 13:33:44 +00:00
John Crispin
e6aac19237 fix regmap debloat patch 
SVN-Revision: 35015
 2013-01-05 00:20:05 +00:00
Jonas Gorski
e952eaa112 bcm63xx: Add Huawei HG556a support 
Add Huawei EchoLife HG556a support.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo@openwrt.org: added some code style fixes]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35011
 2013-01-04 14:47:57 +00:00
Jonas Gorski
0e58173fa5 bcm63xx: Fix caldata partition mtd patch 
Allow bcm63xxpart to receive a caldata offset if calibration data is contained in flash.

Tested-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

SVN-Revision: 35010
 2013-01-04 14:47:50 +00:00
Jonas Gorski
10fc07daac bcm63xx: remove 3.3 support 
3.6 is tested enough to be considered stable.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35009
 2013-01-04 14:47:43 +00:00
Felix Fietkau
96f3911981 kernel: move regmap bloat out of the kernel image if it is only being used in modules 
SVN-Revision: 34999
 2013-01-03 18:39:50 +00:00
Hauke Mehrtens
a105eea1a1 brcm47xx: various fixes and code cleanups for irq code 
This is based on a patch send by Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 34997
 2013-01-03 16:56:54 +00:00
Hauke Mehrtens
4443997fd8 brcm47xx: add bgmac driver 
This Ethernet driver is in early development stage and still has some problems.
This was working on my bcm4716 based device.

Thanks to Rafał Miłecki <zajec5@gmail.com> for writing this driver.

SVN-Revision: 34995
 2013-01-03 02:05:22 +00:00
Hauke Mehrtens
8f6bdcffa1 brcm47xx: build b44 as a module 
SVN-Revision: 34994
 2013-01-03 02:00:25 +00:00
Hauke Mehrtens
22d62d311a brcm47xx: run ifup before starting the switch 
In addition check_module is not needed, nobody checks the return value.

SVN-Revision: 34993
 2013-01-03 01:59:43 +00:00
Hauke Mehrtens
97b2b601c7 brcm47xx: BCMA - IRQ Update - Fix IRQ Flag for I2S Core 
Adjust the IRQ Flag value from 8 to 7 for I2S Core for BCM4716 and
BCM4748 (per the Broadcom SDK).  IRQ Flag values greater than 7 are
ignored when setting the interrupt masks.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 34990
 2013-01-03 01:56:13 +00:00
Hauke Mehrtens
f74e847301 brcm47xx: improve IRQ handling for bcma based devices 
This was party inspirited by patches send by Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 34989
 2013-01-03 01:55:34 +00:00
Hauke Mehrtens
25afeba608 brcm47xx: add a new version of the nvram rewrite patch 
This is the version like it was send for mainline inclusion.

SVN-Revision: 34988
 2013-01-03 01:53:30 +00:00
Hauke Mehrtens
edc7ab525f brcm47xx: move patches already in the mainline kernel to the front 
SVN-Revision: 34987
 2013-01-03 01:51:31 +00:00
Hauke Mehrtens
76c767f122 brcm47xx: remove support for kernel version 3.3 
SVN-Revision: 34986
 2013-01-03 01:48:43 +00:00
Jo-Philipp Wich
7a73c2f91f generic: add some missing kernel config symbols spotted on x86 
SVN-Revision: 34981
 2013-01-02 19:10:24 +00:00
Felix Fietkau
741f6ba7ef x86: fix typo in alix2/net5501 default packages 
SVN-Revision: 34972
 2013-01-02 16:09:23 +00:00
John Crispin
569bbe4970 rt5350 switch support fix 
RT5350 frame engine need reset frame engine and embedded switch together.

Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>

SVN-Revision: 34969
 2013-01-02 11:28:21 +00:00
Gabor Juhos
373b0b9ad1 generic: fix UBIFS build error if XZ compression is disabled 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34959
 2013-01-02 08:53:07 +00:00
Gabor Juhos
d91117459c adm5120: add support for 3.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34954
 2013-01-01 13:15:49 +00:00
Gabor Juhos
f0520f1714 adm5120: nuke 3.3 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34953
 2013-01-01 13:15:44 +00:00
Gabor Juhos
b4315df8e1 adm5120: switch to 3.6 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34952
 2013-01-01 13:15:41 +00:00
Gabor Juhos
edd36342e5 adm5120: add support for 3.6 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34951
 2013-01-01 13:15:36 +00:00
Gabor Juhos
92cd48e9ea adm5120: remove NAND_NO_AUTOINCR flag from rb1xx.c 
Also add a compatibility patch for 3.3.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34950
 2013-01-01 13:15:30 +00:00
Gabor Juhos
03e09078dc adm5120: use mtd_read helper in trxsplit.c 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34949
 2013-01-01 13:15:20 +00:00
Gabor Juhos
e1b13e15b2 adm5120: don't include asm/system.h in adm5120-hcd.c 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34948
 2013-01-01 13:15:16 +00:00
Gabor Juhos
cbe5d664e1 generic: add missing symbol for 3.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34947
 2013-01-01 13:15:11 +00:00
Gabor Juhos
e1965a1d1a ar71xx: register the NAND flash controller device on the AP135/136 boards 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34946
 2013-01-01 13:10:41 +00:00
Gabor Juhos
66efec6783 ar71xx: allow to register the NAND flash controller on the QCA955x 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34945
 2013-01-01 13:10:36 +00:00
Gabor Juhos
2c77e5d7b3 ar71xxx: allow to select ATH79_DEV_NFC for QCA955x 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34944
 2013-01-01 13:10:34 +00:00
Gabor Juhos
d8446d65fe ar71xxx: allow to build the ar934x_nfc driver for QCA955x 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34943
 2013-01-01 13:10:29 +00:00
Gabor Juhos
93c322cacc ar71xx: fix NAND controller base for QCA955x SoCs 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34942
 2013-01-01 13:10:26 +00:00
Gabor Juhos
b57cc9a538 ar71xx: fold AP135 patch 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34941
 2013-01-01 13:10:22 +00:00
John Crispin
624eb36fff adds missing symbol 
SVN-Revision: 34939
 2012-12-30 21:31:10 +00:00
John Crispin
ce57efa3ea fixes usb port on arv 4518 
SVN-Revision: 34935
 2012-12-30 12:38:40 +00:00
Gabor Juhos
fb07876f25 ramips: rt305x: fix garbled name in mach-mzk-w300nh2.c 
Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34934
 2012-12-30 08:23:48 +00:00
Gabor Juhos
6708d68c24 ramips: build firmware image for the Planex MZK-W300NH2 Router 
Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3077/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34927
 2012-12-29 17:50:40 +00:00
Gabor Juhos
8b1ac2ae37 ramips: add user-space support for the Planex MZK-W300NH2 Router 
Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3077/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34926
 2012-12-29 17:50:38 +00:00
Gabor Juhos
d6d06aceb0 ramips: rt305x: add kernel support for the Planex MZK-W300NH2 Router 
This is a Japanese market router, for details check
http://www.planex.co.jp/product/router/mzk-w300nh2/. It has only 16MB
RAM, but base OpenWRT install worked fine for days without issues.
Even an image with built-in Luci worked, but don't expect smooth
experience, due to the lack of RAM. Wifi was not extensively tested,
but seems it is working. GPIO LEDs & buttons, factory flash image and
switch config are confirmed working. Tested against revision 34882 +
this patch.

[juhosg: move user-space support and image generation changes into
separate patches]

Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3077/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34925
 2012-12-29 17:50:35 +00:00
Gabor Juhos
76537041eb ramips: build image for Airlive AIR3GII 
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/2913/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34924
 2012-12-29 17:50:34 +00:00
Gabor Juhos
3aad9b4c9b ramips: add user-space support for Airlive AIR3GII 
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/2913/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34923
 2012-12-29 17:50:32 +00:00
Gabor Juhos
3fcb8bb0dd ramips: rt305x: add kernel support for AirLive AIR3GII 
AirLive AIR3GII is Ralink RT5350F based device with
100Mbps switch, USB port, 4MB flash and 32MB ram.

Works: ethernet (LAN & WAN), wps button, led, USB, sysupgrade
Does not work: wifi (chip RT5350), reset button

[   13.390000] phy0 -> rt2800_init_eeprom: Error - Invalid RT chipset 0x5350 detected.
[   13.400000] phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device.

Other problem: LAN leds is reverse (lights when not cable
connected and vice versa)

[juhosg: move user-space support and image generation changes into
separate patches]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/2913/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34922
 2012-12-29 17:50:28 +00:00
Gabor Juhos
87271e9f28 ar71xx: add support for 3.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34920
 2012-12-29 16:02:31 +00:00
Gabor Juhos
a3a6e0f039 ar71xx: Build the AP135 images 
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34919
 2012-12-29 16:02:28 +00:00
Gabor Juhos
dddf05bde2 ar71xx: Add userspace support for AP135 
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34918
 2012-12-29 16:02:27 +00:00
Gabor Juhos
1a379c5112 ar71xx: Add support for AP135 
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34917
 2012-12-29 16:02:24 +00:00
Gabor Juhos
c6580f64b8 ar71xx: use a backported patch to fix AR933x UART baud rate calculation 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34915
 2012-12-29 13:52:38 +00:00
Felix Fietkau
348dc70c8c ar71xx: change the unaligned access hack to assume an alignment of 2 bytes, slightly improves performance and code size 
SVN-Revision: 34912
 2012-12-28 21:30:24 +00:00
Felix Fietkau
41a039f464 mips: use -mno-branch-likely for kernel and userspace, saves ~11k kernel size after lzma and ~12k squashfs size in the default configuration 
SVN-Revision: 34909
 2012-12-28 19:17:19 +00:00
Felix Fietkau
9bb8b9fadb kernel: remove the cisco SIP NAT patch, at least on 3.6 it crashes 
SVN-Revision: 34901
 2012-12-27 22:59:51 +00:00
Hauke Mehrtens
981b7410f8 brcm47xx: bcma: correct M25P32 serial flash ID 
Thank you Rafał Miłecki.

SVN-Revision: 34900
 2012-12-27 19:18:40 +00:00
Gabor Juhos
386c37b4c2 mpc83xx: add support for 3.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34892
 2012-12-26 10:40:54 +00:00
Gabor Juhos
f67a7a479e mpc83xx: nuke 3.3 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34891
 2012-12-26 10:40:51 +00:00
Gabor Juhos
36af140fe4 mpc83xx: switch to 3.6.11 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34890
 2012-12-26 10:40:50 +00:00
Gabor Juhos
c4c8307ca1 mpc83xx: add support for 3.6 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34889
 2012-12-26 10:40:48 +00:00
Gabor Juhos
e537b8a093 mpc83xx: create package for the rbppc_cf module 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34888
 2012-12-26 10:40:47 +00:00
Gabor Juhos
fff75fe5b6 generic: more missing symbols for 3.{6,7} 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34887
 2012-12-26 10:40:41 +00:00
Gabor Juhos
f5b1cba606 ar71xx: build image for the AP136-020 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34886
 2012-12-26 09:50:37 +00:00
Gabor Juhos
f3f05d86fe ar71xx: add user-space support for AP136-020 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34885
 2012-12-26 09:50:36 +00:00
Gabor Juhos
ed1889db33 ar71xx: add kernel support for the AP136-020 board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34884
 2012-12-26 09:50:34 +00:00
Gabor Juhos
c887a7fe4e ar71xx: rename AP136 to AP136-010 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34883
 2012-12-26 09:50:31 +00:00
Gabor Juhos
f8b4dfd172 ar71xx: dynamically set AR8327's PAD configuration on AP136 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34882
 2012-12-25 18:45:32 +00:00
Gabor Juhos
d4b4c7d102 generic: ar8216: add sgmii_delay_en field to ar8327_platform_data 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34881
 2012-12-25 18:45:31 +00:00
Gabor Juhos
1dc2b6e8fa ar71xx: ag71xx: show PHY interface mode in dmesg 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34880
 2012-12-25 18:45:29 +00:00
Gabor Juhos
69da894432 ramips: fix ASUS WL-330N3G MAC address 
The ASUS WL-330N and WL-330N3G has the MAC address stored at
offset 4, not 40. This is verified by reading original ASUS
firmware GPL_WL-330N3G_source.1028/user/rc/common_ex.c and
GPL_WL-330N_source.1021/user/rc/common_ex.c.

Tested on WL-330N3G, it now gets the same MAC as is printed on
the label on the router.

Signed-off-by: Jan Kardell <jan.kardell@arkub.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34877
 2012-12-24 06:52:41 +00:00
Gabor Juhos
c5a36f13f0 ramips: fix wifi EEPROM extraction on DIR-615-Dx models 
Patch from #12636.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34876
 2012-12-24 06:52:38 +00:00
Imre Kaloz
2c05915b24 add nol2x0 cmdline to disable l2x0 cache 
L2 cache via L2X0 cache controller available on some ARM boards can
provide a performance boost in some situations but decrease performance
in others.  This adds a kernel cmdline to disable L2X0 for cns3xxx based
boards.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 34874
 2012-12-23 18:53:38 +00:00
Gabor Juhos
c3cb63661f generic: ar8216: don't use 0 as default VID on AR8327 
VID0 is reserved for priority-tagged packets.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34862
 2012-12-22 18:30:04 +00:00
Gabor Juhos
fa9d06c7f4 generic: more missing symbols for 3.{6,7} 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34861
 2012-12-22 17:22:41 +00:00
Gabor Juhos
8105c6badd ramips: unify eeprom file name for the built-in wireless MAC 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34860
 2012-12-22 16:09:03 +00:00
Gabor Juhos
c81b4475c9 ramips: rt3883: fix build error 
The cpuport_cfg field has been renamed to port0_cfg.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34859
 2012-12-22 13:50:47 +00:00
Gabor Juhos
64d31e6c6b ar71xx: register the second ethernet interface on the AP136 
Also fix the default network configuration
according to the new setup.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34854
 2012-12-22 12:12:50 +00:00
Gabor Juhos
5dec87afef ar71xx: fix ethernet device registration for QCA9558 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34853
 2012-12-22 12:12:48 +00:00
Gabor Juhos
84a7051cef ar71xx: rename QCA9558 ETH_CFG bit defines 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34852
 2012-12-22 12:12:46 +00:00
Gabor Juhos
4085a5773d ar71xx: fixup allowed PHY interface types for QCA9558 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34851
 2012-12-22 12:12:44 +00:00
Gabor Juhos
f01a786825 ar71xx: don't assign any MII bus device on QCA9558 by default 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34850
 2012-12-22 12:12:43 +00:00
Gabor Juhos
9edcd9d3a3 ar71xx: ag71xx: fix mii_bus_dev sanity check 
The mii_bus device is not required if phy_mask is zero.
The driver will use a fixed connection if it is not
specified.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34849
 2012-12-22 12:12:41 +00:00
Gabor Juhos
ad0f03d250 ar71xx: ag71xx: don't start/stop built-in switch w/o mii_bus_dev 
Trying to do that causes a NULL pointer dereference:

CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 801d170c, ra == 801d18d4
Oops[#1]:
Cpu 0
$ 0   : 00000000 00000000 00000000 00000001
$ 4   : 00000000 802e6390 ffff8f45 00000001
$ 8   : 804b5360 ffffff80 802f93bc 00000000
$12   : 802f93e8 00000000 00000000 00000000
$16   : 8381aba0 8381aba0 00000000 00000000
$20   : 8295eff0 00000032 80000000 004101b8
$24   : 00000000 777265b0
$28   : 82936000 82937cf0 00420000 801d18d4
Hi    : 00000000
Lo    : 00000001
epc   : 801d170c ar7240sw_reset+0x1c/0x19c
    Tainted: G           O
ra    : 801d18d4 ag71xx_ar7240_start+0x28/0xc0
Status: 1100fc03    KERNEL EXL IE
Cause : 00800008
BadVA : 00000000
PrId  : 00019750 (MIPS 74Kc)
Modules linked in: ath79_wdt ohci_hcd ledtrig_usbdev ledtrig_netdev
nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ftp
 ipt_MASQUERADE iptable_nat nf_nat pppoe xt_conntrack xt_CT xt_NOTRACK
iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack
ehci_hcd pppox ipt_REJECT xt_TCPMSS xt_LOG xt_comment xt_multiport
xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tab
les ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) ath9k_hw(O)
ath(O) mac80211(O) usbcore usb_common nls_base crc_ccitt cfg80211(O) c
ompat(O) arc4 aes_generic crypto_blkcipher cryptomgr aead crypto_hash
crypto_algapi ledtrig_timer ledtrig_default_on leds_gpio gpio_button
_hotplug(O)
Process netifd (pid: 677, threadinfo=82936000, task=82cbe140, tls=77803750)
Stack : ffffffff 80087900 00000001 82937d74 8381aba0 8381aba0 00000000 00000000
        8295eff0 801d18d4 8295eff0 801fa4a4 00420000 80092158 00000002 8381aba0
        8381a800 00000000 00000080 801cf900 8027e720 00000000 00000000 8009223c
        8381a800 8381a82c 8027e720 00000000 00000000 7f9d14f0 00420000 801ec08c
        8381a800 801ebfb0 33000000 82937e30 00000001 8381a800 00001003 801ec348
        ...
Call Trace:
[<801d170c>] ar7240sw_reset+0x1c/0x19c
[<801d18d4>] ag71xx_ar7240_start+0x28/0xc0
[<801cf900>] ag71xx_open+0x1d0/0x258
[<801ec08c>] __dev_open+0xcc/0x130
[<801ec348>] __dev_change_flags+0xc0/0x160
[<801ec490>] dev_change_flags+0x20/0x6c
[<801ec5c8>] dev_ifsioc+0xec/0x348
[<801ecdb8>] dev_ioctl+0x594/0x67c
[<800ec00c>] do_vfs_ioctl+0x598/0x5ec
[<800ec0b0>] sys_ioctl+0x50/0x90
[<8006a3c4>] stack_done+0x20/0x40
Code: afbf0024  afb40020  afb10014 <8c910000> 00809021  24100104 24130704  8e440000  02002821

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34848
 2012-12-22 12:12:40 +00:00
Gabor Juhos
3931c9524c generic: ar8316: allow to configure port 6 via platform data on AR8327 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34847
 2012-12-22 12:12:37 +00:00
Gabor Juhos
a0b31f97bb generic: ar8216: rename cpuport_cfg to port0_cfg in ar8327_platform_data 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34846
 2012-12-22 12:12:35 +00:00
Gabor Juhos
b44cdcde8e ramips: add support for 3.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34845
 2012-12-22 12:11:13 +00:00
Gabor Juhos
b81667cb23 ramips: convert to use {e,o}hci-platform driver 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34843
 2012-12-22 12:11:08 +00:00
Gabor Juhos
c0e1a6f342 generic/3.6: add platform specific power callbacks to {e,o}hci_platform drivers 
Backport of upstream commits:

86e4cb35f2260374df4139c2352afe7fe247cb60 usb: host: ehci-platform: BUG_ON() to WARN_ON() on probe
b6dd245c4594482d46507a0bfd100439be367952 usb: host: ohci-platform: BUG_ON() to WARN_ON() on probe
04216bedafb1b3992a6c2b7f1518281d2ba5fc7b usb: host: ehci-platform: add platform specific power callback
e4d37aeb373a5edceecc1dadc76fabbe8bc18e44 usb: host: ohci-platform: addplatform specific power callback

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34842
 2012-12-22 12:11:06 +00:00
John Crispin
efe3225e2b ar9 did not load atm driver properly 
SVN-Revision: 34840
 2012-12-22 10:16:52 +00:00
John Crispin
379cd6e25e dont use input layer for gpio buttons 
SVN-Revision: 34839
 2012-12-21 20:04:20 +00:00
John Crispin
90a3761b0b default switch setup for WBMR 
SVN-Revision: 34838
 2012-12-21 20:04:12 +00:00
John Crispin
ae0b9ff1ce Setting the MDC clock to 2.5MHz and changing the mii mode to rgmii seems to fix the communication issues with the ar8316 switch. (ticket #11143) 
Tested only on the wbmr-hp-g300h, could affect/break other devices.

Signed-off-by: Sebastian Mayr <sebastian.mayr@student.uibk.ac.at>

SVN-Revision: 34837
 2012-12-21 20:04:04 +00:00
John Crispin
9818a1f00b adds script to set wps info on boards with a wps button 
SVN-Revision: 34836
 2012-12-21 20:03:59 +00:00
John Crispin
3134205dfd minor tweaks to WBMR image 
SVN-Revision: 34835
 2012-12-21 20:03:54 +00:00
John Crispin
f4b2439554 add missing PHY_BASIC_FEATURES to 100mbit phys 
SVN-Revision: 34826
 2012-12-21 14:41:35 +00:00
John Crispin
861bf6af49 fix typo inside fritz3370 devicetree file 
SVN-Revision: 34825
 2012-12-21 14:41:30 +00:00
John Crispin
54c096527a more devicetree fixes 
SVN-Revision: 34824
 2012-12-21 13:47:55 +00:00
John Crispin
59cc6d9ddd improve button handling 
SVN-Revision: 34823
 2012-12-21 13:47:50 +00:00
John Crispin
7ce4c81647 add phy-reset gpio handling to xrx200-net 
SVN-Revision: 34822
 2012-12-21 13:47:44 +00:00
John Crispin
42d668174e add more lantiq phy ids based on daniels uboot code 
SVN-Revision: 34821
 2012-12-21 13:47:40 +00:00
John Crispin
16c5946f8b refresh patch and install v1.1 gphy blobs 
SVN-Revision: 34820
 2012-12-21 13:47:35 +00:00
John Crispin
123343d424 make to rtl8366_smi of binding use gpio_is_valid 
SVN-Revision: 34816
 2012-12-21 13:47:14 +00:00
Gabor Juhos
840d0d246c kernel: add solos-pci update for 3.3 
Same patches that I just merged for 3.6 and 3.7, except with one
additional fix that went into v3.4 that needed to be included.

Submitted more for the benefit of the AA branch than for trunk.

[juhosg: refresh the patch with quilt]

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34813
 2012-12-21 10:38:33 +00:00
Gabor Juhos
04ce7e213f rb532: add support for 3.7 
Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34812
 2012-12-20 19:25:43 +00:00
Gabor Juhos
e1b5eeeaa4 ramips: Add USB support for DAP-1350 platform. 
It seems to work as intended, but only lightly tested.

Patch-by: Bryan Steele <brynet@gmail.com>
SIgned-off-by: Gabor Juhos <juhsog@openwrt.org>

SVN-Revision: 34811
 2012-12-20 19:17:17 +00:00
Gabor Juhos
311d921e12 rb532: nuke 3.3 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34810
 2012-12-20 19:09:03 +00:00
Gabor Juhos
befb29c7a3 rb532: switch to 3.6.11 
Compile tested only. The target is broken anyway,
so the kernel version does not matter too much.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34809
 2012-12-20 19:09:01 +00:00
Gabor Juhos
dbcb4708fb rb532: add support for 3.6 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34808
 2012-12-20 19:09:00 +00:00
Gabor Juhos
5399d00ae6 ppc44x: add support for 3.7 
Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34807
 2012-12-20 18:11:22 +00:00
Gabor Juhos
2d6a41cf5d kernel: add solos-pci patches from 3.8 for new hardware 
[juhosg: refresh patches with quilt, skip the patch for 3.3]

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34806
 2012-12-20 17:14:57 +00:00
Gabor Juhos
d21275a36b linux: add missing symbols for 3.{6,7} 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34805
 2012-12-20 17:14:56 +00:00
Gabor Juhos
a81fa11243 cns21xx: add support for 3.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34801
 2012-12-20 14:51:17 +00:00
Gabor Juhos
1d7ba088e6 ppc40x: add support for 3.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34800
 2012-12-20 14:51:16 +00:00
Gabor Juhos
708c8c3d0d ppc40x: add missing NULL terminator to avoid boot panic on PPC40x 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34799
 2012-12-20 14:37:39 +00:00
Gabor Juhos
e108cb91c0 ar71xx: rename fix-ar933x-reset patch 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34798
 2012-12-20 14:13:16 +00:00
Gabor Juhos
5da1d7daa5 ppc40x/44x: disable SWIOTLB 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34797
 2012-12-20 14:09:39 +00:00
John Crispin
1b0aaff246 adds a fix for ar8216 mii detection on etop driver 
SVN-Revision: 34795
 2012-12-19 16:20:24 +00:00
Mirko Vogt
4d4b2d3ced merge /lib/functions/boot.sh and /lib/functions.sh 
SVN-Revision: 34794
 2012-12-19 16:07:53 +00:00
Mirko Vogt
e34a4e0c7b Do not use deprecated path to functions.sh (/etc/functions.sh -> /lib/functions.sh) 
SVN-Revision: 34793
 2012-12-19 16:07:50 +00:00
Mirko Vogt
439a869090 Do not overload mount-call - trying to reduce confusion 
The behaviour of calling 'mount' differed depending on whether it called
the busybox-mount, the mount of util-linux, the mount defined in
/lib/functions.sh and /lib/functions/boot.sh

/etc/preinit even included /lib/functions.sh and /lib/functions/boot.sh,
both re-defining 'mount'.

SVN-Revision: 34792
 2012-12-19 16:07:46 +00:00
John Crispin
687920ba3e minor basefiles fixes 
SVN-Revision: 34790
 2012-12-19 15:17:42 +00:00
John Crispin
e472671bde fix gptu clocks 
SVN-Revision: 34789
 2012-12-19 15:17:31 +00:00
John Crispin
5495ffbfdf more board file fixes 
SVN-Revision: 34788
 2012-12-19 15:17:11 +00:00
Gabor Juhos
c0515a5a8b ppc44x: nuke 3.3 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34787
 2012-12-19 09:45:43 +00:00
Gabor Juhos
aedd9433fa ppc44x: switch to 3.6.11 
Compile tested only. The target is broken anyway,
so the kernel version does not matter too much.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34786
 2012-12-19 09:45:42 +00:00
Gabor Juhos
982d3e3f7a ppc44x: add support for 3.6 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34785
 2012-12-19 09:45:40 +00:00
Gabor Juhos
5f82aa4d15 ar71xx: merge machine patches 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34783
 2012-12-19 08:50:45 +00:00
Gabor Juhos
cf99770800 ar71xx: build image for the TL-MR3220 v2 
Based on the following patch:
http://patchwork.openwrt.org/patch/3043/

[juhosg: reorder MR3220 MultiProfile entry]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34782
 2012-12-19 08:50:44 +00:00
Gabor Juhos
b1b7aa674e ar71xx: add user-space support for the TL-MR3220 v2 
Based on the following patch:
http://patchwork.openwrt.org/patch/3043/

[juhosg: add uci-defaults/network support]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34780
 2012-12-19 08:50:41 +00:00
Gabor Juhos
0767605d17 ar71xx: add kernel support for the TL-MR3220 v2 
Based on the following patch:
http://patchwork.openwrt.org/patch/3043/

[juhosg:
 - remove custom LED and button arrays
 - use separate machine specific patch
 - update Kconfig]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34779
 2012-12-19 08:50:35 +00:00
John Crispin
4aa8272c8b fix gptu patch - tapi should now load 
SVN-Revision: 34777
 2012-12-18 20:12:57 +00:00
Gabor Juhos
c62586382a ppc40x: nuke 3.3 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34776
 2012-12-18 20:10:37 +00:00
Gabor Juhos
7d0cf4f7a0 ppc40x: switch to 3.6.11 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34775
 2012-12-18 20:10:34 +00:00
Gabor Juhos
565cdf58b5 ppc40x: add support for 3.6 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34774
 2012-12-18 20:10:31 +00:00
Gabor Juhos
2143de1a3d generic: disable crashlog on ppc 
It causes panic on boot:

[    0.194287] __ioremap(): phys addr 0x1f00000 is RAM lr crashlog_init_fs
[    0.200902] Unable to handle kernel paging request for data at address 0x00000000
[    0.208347] Faulting instruction address: 0xc026cb10
[    0.213282] Oops: Kernel access of bad area, sig: 11 [#1]
[    0.218586] PowerPC 40x Platform
[    0.221783] Modules linked in:
[    0.224817] NIP: c026cb10 LR: c026cb10 CTR: c000c1b8
[    0.229745] REGS: c1825ed0 TRAP: 0300   Not tainted  (3.6.11)
[    0.235435] MSR: 00029030 <EE,ME,IR,DR>  CR: 42004082  XER: 00000000
[    0.241745] DEAR: 00000000, ESR: 00000000
[    0.245724] TASK = c181e000[1] 'swapper' THREAD: c1824000
GPR00: c026cb10 c1825f80 c181e000 00000000 0000004b 0000004b c029a4dd 6f675f69
GPR08: 6e69745f c0290440 00000000 00000000 22004084 00000000 01ffc400 004011f8
GPR16: 00000001 ffffffff 00000000 007fff00 01ff6120 01f94298 01fff258 c02631b8
GPR24: c02604bc 00000019 c02a0000 c02a0000 c027c644 00000000 c02c0000 c02bd388
[    0.279089] NIP [c026cb10] crashlog_init_fs+0x30/0xe0
[    0.284095] LR [c026cb10] crashlog_init_fs+0x30/0xe0
[    0.289000] Call Trace:
[    0.291442] [c1825f80] [c026cb10] crashlog_init_fs+0x30/0xe0 (unreliable)
[    0.298185] [c1825f90] [c00023fc] do_one_initcall+0xdc/0x1c8
[    0.303812] [c1825fc0] [c02638c4] kernel_init+0x110/0x1a4
[    0.309154] [c1825ff0] [c000ad4c] kernel_thread+0x4c/0x68
[    0.314488] Instruction dump:
[    0.317429] 9421fff0 7c0802a6 bfc10008 3fc0c02c 90010014 3bfed388 3800fff4 807f0004
[    0.325117] 2f830000 41be00a4 38804000 4bda2809 <81630000> 7c691b78 907ed388 6d605e11

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34773
 2012-12-18 20:10:02 +00:00
Gabor Juhos
1e8ab43834 generic: add missing symbols for 3.{6,7} 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34772
 2012-12-18 20:09:58 +00:00
John Crispin
af48676b28 update to 3.7.1 
SVN-Revision: 34771
 2012-12-18 19:32:01 +00:00
Gabor Juhos
1080f68b2b etrax: R.I.P. 
It is broken and it is not maintained by anyone since long time.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34768
 2012-12-18 17:54:04 +00:00
Gabor Juhos
b86e82e5cc s3c2442: R.I.P. 
It is broken and it is not maintained by anyone since long time.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34767
 2012-12-18 17:54:02 +00:00
Gabor Juhos
db831511d2 goldfish: R.I.P. 
It is broken and it is not maintained by anyone since long time.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34766
 2012-12-18 17:53:53 +00:00
Gabor Juhos
979bc5536d ps3: R.I.P. 
It is broken and it is not maintained by anyone since long time.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34765
 2012-12-18 17:53:51 +00:00
Gabor Juhos
6f794eeedb pxcab: R.I.P. 
It is broken and it is not maintained by anyone since long time.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34764
 2012-12-18 17:53:17 +00:00
Gabor Juhos
029553b698 refresh kernel configs with kconfig.pl 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34763
 2012-12-18 15:54:15 +00:00
Gabor Juhos
7ff7340304 geos: add missing config-3.7 file 
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34762
 2012-12-18 15:51:45 +00:00
Gabor Juhos
149534f3ed ar71xx: image: add OpenMesh profile 
It allows to build firmware images for all OpenMesh
products in one step.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34761
 2012-12-18 15:16:05 +00:00
Gabor Juhos
8903f8581b kernel: update linux 3.7 to 3.7.1 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34760
 2012-12-18 15:13:31 +00:00
Gabor Juhos
b2caa5db24 cns21xx: remove broken flag 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34759
 2012-12-18 14:51:58 +00:00
Gabor Juhos
39796c434c cns21xx: nuke 3.3 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34758
 2012-12-18 14:51:58 +00:00
Gabor Juhos
991ebc29d7 cns21xx: switch to 3.6.11 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34757
 2012-12-18 14:51:57 +00:00
Gabor Juhos
9e1a54296a cns21xx: fix build errors on 3.6 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34756
 2012-12-18 14:51:55 +00:00
Gabor Juhos
5a680f1cbf geos: update to 3.7 
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34755
 2012-12-18 14:50:48 +00:00
Gabor Juhos
9b15d3e22a kernel: add 3.7 support for x86 
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34754
 2012-12-18 14:50:47 +00:00
Gabor Juhos
d537f76ddd kernel: Fix Cisco SIP NAT patch to build with 3.7 
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34753
 2012-12-18 14:50:45 +00:00
Gabor Juhos
0c64d55b14 kernel: add missing config option BATTERY_DS2781 for 3.7 
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34749
 2012-12-18 14:50:41 +00:00
Gabor Juhos
44b9898251 kernel: update linux 3.6 to 3.6.11 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34748
 2012-12-18 14:41:16 +00:00
Gabor Juhos
fe8efb72ca ramips: nuke 3.3 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34744
 2012-12-17 22:28:11 +00:00
Gabor Juhos
fc0da6852e ar71xx: nuke 3.3 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34743
 2012-12-17 22:28:09 +00:00
Felix Fietkau
1bdea42662 kernel: fix a warning in the O_DIRECT debloat patch 
SVN-Revision: 34740
 2012-12-17 20:55:49 +00:00
Felix Fietkau
2bda7a5b41 kernel: add some debloat patches, strip down procfs and make O_DIRECT support optional, saves ~15K after lzma on MIPS 
SVN-Revision: 34737
 2012-12-17 15:11:39 +00:00
Gabor Juhos
d153bdbba9 generic: rtl836x: fix compiler warnings 
CC      drivers/net/phy/rtl8366rb.o
In file included from drivers/net/phy/rtl8366s.c:16:0:
include/linux/of_platform.h:106:13: warning: 'struct device' declared inside parameter list [enabled by default]
include/linux/of_platform.h:106:13: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default]
drivers/net/phy/rtl8366s.c: In function 'rtl8366s_probe':
drivers/net/phy/rtl8366s.c:1094:2: warning: label 'err_out' defined but not used [-Wunused-label]
drivers/net/phy/rtl8366s.c:1055:32: warning: unused variable 'pdata'[-Wunused-variable]
  CC      drivers/net/phy/rtl8366rb.o
In file included from drivers/net/phy/rtl8366rb.c:17:0:
include/linux/of_platform.h:106:13: warning: 'struct device' declared inside parameter list [enabled by default]
include/linux/of_platform.h:106:13: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default]
drivers/net/phy/rtl8366rb.c: In function 'rtl8366rb_probe':
drivers/net/phy/rtl8366rb.c:1214:2: warning: label 'err_out' defined but not used [-Wunused-label]
drivers/net/phy/rtl8366rb.c:1175:32: warning: unused variable 'pdata'[-Wunused-variable]
  CC      drivers/net/phy/rtl8367.o
In file included from drivers/net/phy/rtl8367.c:15:0:
include/linux/of_platform.h:106:13: warning: 'struct device' declared inside parameter list [enabled by default]
include/linux/of_platform.h:106:13: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default]
drivers/net/phy/rtl8367.c: In function 'rtl8367_probe':
drivers/net/phy/rtl8367.c:1712:2: warning: label 'err_out' defined but not used [-Wunused-label]
drivers/net/phy/rtl8367.c:1677:32: warning: unused variable 'pdata' [-Wunused-variable]
  CC      drivers/net/phy/rtl8367b.o
In file included from drivers/net/phy/rtl8367b.c:15:0:
include/linux/of_platform.h:106:13: warning: 'struct device' declared inside parameter list [enabled by default]
include/linux/of_platform.h:106:13: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default]
drivers/net/phy/rtl8367b.c: In function 'rtl8367b_probe':
drivers/net/phy/rtl8367b.c:1494:2: warning: label 'err_out' defined but not used [-Wunused-label]
drivers/net/phy/rtl8367b.c:1459:32: warning: unused variable 'pdata' [-Wunused-variable]

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34731
 2012-12-17 13:02:18 +00:00
Gabor Juhos
61d715505c ar71xx: add profile and build image for UniFi AP Pro 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34730
 2012-12-17 12:28:21 +00:00
Gabor Juhos
abbd18776e ar71xx: add user-space support for UniFi AP Pro 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34728
 2012-12-17 12:28:11 +00:00
Gabor Juhos
ff3f28265f ar71xx: add kernel support for the UniFi AP Pro 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34727
 2012-12-17 12:28:02 +00:00
John Crispin
7bcb6b5479 make pinctrl-falcon honour status="disbaled"; 
SVN-Revision: 34714
 2012-12-16 10:03:28 +00:00
John Crispin
573cf13419 fix falcon profile 
SVN-Revision: 34713
 2012-12-16 10:03:23 +00:00
John Crispin
33d3433d75 fix i2c-lantiq module 
SVN-Revision: 34712
 2012-12-16 10:03:18 +00:00
John Crispin
b637eb598d add falcon devicetree files 
SVN-Revision: 34711
 2012-12-16 10:03:11 +00:00
Felix Fietkau
8c3306b8b6 kernel: add a missing config symbol for 3.7 
SVN-Revision: 34710
 2012-12-15 22:00:03 +00:00
Jonas Gorski
eba8cccd88 linux: generic: rtl836*: fix compilation with !CONFIG_OF 
fixes the following errors caused by r34682:

  CC [M]  drivers/net/phy/rtl8366_smi.o
In file included from drivers/net/phy/rtl8366_smi.c:26:0:
drivers/net/phy/rtl8366_smi.h:149:46: warning: 'struct platform_device' declared inside parameter list [enabled by default]
drivers/net/phy/rtl8366_smi.h:149:46: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default]
drivers/net/phy/rtl8366_smi.c:1398:65: warning: 'struct platform_device' declared inside parameter list [enabled by default]
drivers/net/phy/rtl8366_smi.c: In function 'rtl8366_smi_probe_plat':
drivers/net/phy/rtl8366_smi.c:1400:44: error: dereferencing pointer to incomplete type
drivers/net/phy/rtl8366_smi.c:1402:11: error: dereferencing pointer to incomplete type
drivers/net/phy/rtl8366_smi.c:1403:16: error: dereferencing pointer to incomplete type
drivers/net/phy/rtl8366_smi.c: At top level:
drivers/net/phy/rtl8366_smi.c:1415:46: warning: 'struct platform_device' declared inside parameter list [enabled by default]
drivers/net/phy/rtl8366_smi.c:1415:21: error: conflicting types for 'rtl8366_smi_probe'
drivers/net/phy/rtl8366_smi.h:149:21: note: previous declaration of 'rtl8366_smi_probe' was here
drivers/net/phy/rtl8366_smi.c: In function 'rtl8366_smi_probe':
drivers/net/phy/rtl8366_smi.c:1420:31: error: dereferencing pointer to incomplete type
drivers/net/phy/rtl8366_smi.c:1424:10: error: dereferencing pointer to incomplete type
drivers/net/phy/rtl8366_smi.c:1425:3: warning: passing argument 1 of 'rtl8366_smi_probe_of' from incompatible pointer type [enabled by default]
drivers/net/phy/rtl8366_smi.c:1392:19: note: expected 'struct device_node *' but argument is of type 'struct platform_device *'
drivers/net/phy/rtl8366_smi.c:1427:3: warning: passing argument 1 of 'rtl8366_smi_probe_plat' from incompatible pointer type [enabled by default]
drivers/net/phy/rtl8366_smi.c:1398:5: note: expected 'struct platform_device *' but argument is of type 'struct platform_device *'
drivers/net/phy/rtl8366_smi.c: At top level:
drivers/net/phy/rtl8366_smi.c:1438:1: error: conflicting types for 'rtl8366_smi_probe'
drivers/net/phy/rtl8366_smi.h:149:21: note: previous declaration of 'rtl8366_smi_probe' was here
make[7]: *** [drivers/net/phy/rtl8366_smi.o] Error 1
make[6]: *** [drivers/net/phy] Error 2
make[5]: *** [drivers/net] Error 2
make[4]: *** [drivers] Error 2

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 34703
 2012-12-15 13:32:02 +00:00
John Crispin
3ca51b5399 select hcd as a default package for the dgn3500 
SVN-Revision: 34702
 2012-12-15 11:01:16 +00:00
John Crispin
85e4da7e23 EASY80920 has 2 usb ports 
SVN-Revision: 34701
 2012-12-15 11:01:11 +00:00
John Crispin
3dac521a49 remove 3.3 and 3.6 
SVN-Revision: 34699
 2012-12-15 02:01:08 +00:00
John Crispin
1dece11487 cleanup basefiles 
SVN-Revision: 34698
 2012-12-15 02:01:00 +00:00
John Crispin
601bc28669 clean up modules.mk 
SVN-Revision: 34697
 2012-12-15 02:00:55 +00:00
John Crispin
2c33df0376 add devicetrees 
SVN-Revision: 34691
 2012-12-15 02:00:20 +00:00
John Crispin
3a948770cf add linux-v3.7 
SVN-Revision: 34687
 2012-12-15 01:59:45 +00:00
John Crispin
d8678644f9 make rtl8366 driver OF capable 
SVN-Revision: 34682
 2012-12-15 01:59:08 +00:00
Hauke Mehrtens
4901ac8225 brcm47xx: improve suppressing printing if a module was found in preinit function. 
Thank you Bastian Bittorf

SVN-Revision: 34680
 2012-12-14 22:45:12 +00:00
Gabor Juhos
57d7df3a35 generic: export include/linux/switch.h on 3.3, 3.6 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34678
 2012-12-14 12:11:48 +00:00
Gabor Juhos
a860153cce generic: disintegrate UAPI from include/linux/switch.h 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34677
 2012-12-14 12:11:41 +00:00
Gabor Juhos
8aed692309 generic: refresh patches 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34676
 2012-12-14 08:47:39 +00:00
Gabor Juhos
272ef8ac00 generic: update pci_disable_usb_common_quirks patch 
Fixes the following compiler warning:
drivers/usb/host/pci-quirks.c:459:23: warning: 'quirk_usb_handoff_uhci' defined but not used [-Wunused-function]

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34675
 2012-12-14 08:32:56 +00:00
Gabor Juhos
2e2c88b625 ar71xx: reorder some patches 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34674
 2012-12-14 07:16:56 +00:00
Gabor Juhos
34411a0cbd ar71xx: merge unifi outdoor patch into the ubnt-xm one 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34673
 2012-12-14 07:16:50 +00:00
Hauke Mehrtens
6c8efbfdc0 brcm47xx: Additional BCM4716 support 
Additional BCM4716 support.  Still needs working ethernet driver.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 34672
 2012-12-13 18:57:38 +00:00
Hauke Mehrtens
6672d869da brcm47xx: BCMA - Broadcom 2011 SDK Updates 
I noticed these changes when reviewing the 2011 Broadcom SDK. I haven't
noticed any obvious changes in behavior with them applied; but thought I
should at least pass them on.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 34670
 2012-12-13 18:54:04 +00:00
Hauke Mehrtens
97d22306da brcm47xx: return the real irq number in bcma_core_irq 
The irq signal numbers that are send by the cpu are increased by 2 from
the number programmed into the mips core by bcma.
Return the irq number on which the irqs are send in bcma_core_irq() now.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 34669
 2012-12-13 18:51:10 +00:00
Gabor Juhos
6e4082f170 kernel: fix solos-pci skb double-free in DMA mode 
[juhosg: refresh the patches with quilt]

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34667
 2012-12-13 18:39:31 +00:00
Florian Fainelli
321852348f kernel: fix perf build with uclibc toolchains on x86 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34666
 2012-12-13 17:34:22 +00:00
Florian Fainelli
5e7d69554e kernel/3.6: backport an upstream build for perf with uClibc 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34662
 2012-12-13 15:40:27 +00:00
Felix Fietkau
2bb7f82d8a kernel: fix porting mistakes on the 3.6+ SIP NAT patch causing crashes 
SVN-Revision: 34657
 2012-12-13 13:07:13 +00:00
Hauke Mehrtens
71712ec522 brcm47xx: this usb patch is not needed, the Broadcom SDK does it the other way. 
SVN-Revision: 34655
 2012-12-13 00:12:42 +00:00
Hauke Mehrtens
5be97468f6 brcm47xx: use kernel 3.6.10 by default now 
SVN-Revision: 34654
 2012-12-13 00:11:55 +00:00
Hauke Mehrtens
235c065e12 brcm47xx: suppress printing if a module was found in preinit function. 
SVN-Revision: 34653
 2012-12-13 00:11:11 +00:00
Hauke Mehrtens
3a4a6cfd64 kernel: in kernel 3.6.8 and later tg3 depends on hwmon.ko 
SVN-Revision: 34652
 2012-12-13 00:09:55 +00:00
Hauke Mehrtens
1bd8db0bd6 kernel: update bcma and ssb to master-2012-12-11-2 from wireless-testing 
SVN-Revision: 34651
 2012-12-12 22:42:18 +00:00
Gabor Juhos
d085aad288 ar71xx: add profile and build initramfs image for the WNDR4300 
It is not yet possible to use the default squasfsh/jffs2 images
on NAND flashes, so only initramfs image is supported for now.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34650
 2012-12-12 16:49:52 +00:00
Gabor Juhos
dcdfcb75f0 ar71xx: add user-space support for the NETGEAR WNDR4300 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34649
 2012-12-12 16:49:51 +00:00
Gabor Juhos
bc82db7d78 ar71xx: add kernel support for the NETGEAR WNDR4300 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34647
 2012-12-12 16:49:49 +00:00
Gabor Juhos
75b71f4a74 ar71xx: add ap91_pci_init_simple helper 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34646
 2012-12-12 16:49:48 +00:00
Gabor Juhos
d7cebac243 ar71xx: add ath79_wmac_register_simple helper 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34645
 2012-12-12 16:49:47 +00:00
Gabor Juhos
ec26814b0e ar71xx: refresh 3.3 patches 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34644
 2012-12-12 16:49:46 +00:00
Gabor Juhos
cdfc300948 ar71xx: remove superfluous USB patches for 3.3 
SVN-Revision: 34643
 2012-12-12 16:49:43 +00:00
Gabor Juhos
eece71be56 generic: fix 8139cp patch for 3.6 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34640
 2012-12-12 08:37:27 +00:00
Gabor Juhos
2b378d11c8 kernel: update linux 3.6 to 3.6.10 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34639
 2012-12-11 20:14:39 +00:00
Florian Fainelli
ed15c452a1 kernel: update to 3.7 final 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34626
 2012-12-11 11:31:17 +00:00
Florian Fainelli
aa2dc106c6 switch to 3.6 kernel 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34623
 2012-12-10 21:06:10 +00:00
Florian Fainelli
ff6116cbdf add 3.6 kernel support 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34622
 2012-12-10 21:06:05 +00:00
Florian Fainelli
17c76e5ca8 add sound feature 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34621
 2012-12-10 21:05:48 +00:00
Florian Fainelli
cbfca35c76 generic: backport a fix for the input keymap-matrix module 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34620
 2012-12-10 21:05:42 +00:00
Florian Fainelli
87c8808ca5 keyboard driver depends on input-matrixkmap for 3.6+ 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34619
 2012-12-10 21:05:36 +00:00
Florian Fainelli
5c28c5255f generic: backport an upstream fix for building snd-soc-pcm as a module 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34617
 2012-12-10 21:05:27 +00:00
Florian Fainelli
f016b935d3 also list kmod-sound-core in the default packages 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34615
 2012-12-10 21:05:11 +00:00
Gabor Juhos
dfd718d13d mac80211: ath9k: allow to load EEPROM data via firmware API 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34606
 2012-12-10 15:46:15 +00:00
Florian Fainelli
374a72411a generic/kernel: add a fix for a common MIPS build failure. 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34602
 2012-12-10 15:04:10 +00:00
Florian Fainelli
c1c6a23f13 kernel/generic: refresh 3.7 patches 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34601
 2012-12-10 15:03:55 +00:00
Florian Fainelli
0f90806014 kernel/generic: port r34599 over 3.7 kernel 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34600
 2012-12-10 15:03:51 +00:00
Florian Fainelli
67e85c0018 kernel/generic: fix build failure on missing uhci symbol 
linux-3.6.8/drivers/usb/host/pci-quirks.c:471: undefined reference to
`uhci_check_and_reset_hc'

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34599
 2012-12-10 14:24:28 +00:00
John Crispin
c2ae0ec02a add support for Hauppauge Broadway 
This patch introduces OpenWRT support for the base Hauppauge/PCTV Broadway
platform.  It doesn't deal with the TV tuner or transcoder at this point,
but the core functionality is working (Ethernet, wireless, USB, buttons,
LEDs, etc).

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>

SVN-Revision: 34595
 2012-12-10 14:13:01 +00:00
Gabor Juhos
3cbc1a49e2 ar71xx: load ar934x_nfc driver earlier 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34589
 2012-12-10 10:38:11 +00:00
Gabor Juhos
1f7ae58a2c ar71xx: ar934x_nfc: allow to control DMA data swap via platform data 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34588
 2012-12-10 10:38:07 +00:00
Gabor Juhos
2581173660 kernel: update linux 3.6 to 3.6.9 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34578
 2012-12-08 15:01:33 +00:00
Gabor Juhos
47f9b2a110 ar71xx: TP-LINK also has a family TL-WDR 
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34577
 2012-12-07 19:10:57 +00:00
Gabor Juhos
d7ba2b4840 ar71xx: add profile and build image for TP-LINK TL-WA801N/ND 
Patch-by: Amir Sagie <openwrt-devel@taproot.org.il>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34576
 2012-12-07 19:10:56 +00:00
Florian Fainelli
deeeb5f671 create Linksys WRTU54G-TM profile 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34572
 2012-12-07 18:02:31 +00:00
Florian Fainelli
33f6c5ddb9 kernel: add missing USB configuration symbols after r34501 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34568
 2012-12-07 11:01:53 +00:00
Florian Fainelli
8236584b13 rename interrupt number constants 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34566
 2012-12-06 22:41:14 +00:00
Florian Fainelli
f1e4da0389 remove the now deprecated /proc/adm8668 interface 
Proper gpiolib support is hooked instead.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34565
 2012-12-06 22:41:09 +00:00
Florian Fainelli
849662a8ec add a gpiolib driver 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34564
 2012-12-06 22:41:04 +00:00
Florian Fainelli
78b235cfc3 do not reset WAN and LAN blocks 
This is taken care of by the tulip driver accordingly.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34563
 2012-12-06 22:40:58 +00:00
Florian Fainelli
b3f36553cc enable and advertise USB support 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34562
 2012-12-06 22:40:54 +00:00
Florian Fainelli
a5aed4ec3a add support for on-board EHCI controller 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34561
 2012-12-06 22:40:49 +00:00
Florian Fainelli
88f6bf64cf remove the "old" tulip forked driver 
We can now use the mainline tulip driver.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34559
 2012-12-06 22:40:40 +00:00
Florian Fainelli
40ab1facd2 use the tulip platform driver 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34558
 2012-12-06 22:40:36 +00:00
Florian Fainelli
445e77fdb5 patch the tulip driver to accept a platform variant 
Isolate the PCI specific parts and group them under CONFIG_TULIP_PCI
CONFIG_TULIP_PLATFORM can be enabled for a platform style Tulip driver.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34557
 2012-12-06 22:40:31 +00:00
Florian Fainelli
b1f1381c27 move clock frequencies into clock driver 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34556
 2012-12-06 22:40:26 +00:00
Florian Fainelli
60663b12b2 add CONFIG_GPIO_PL061 config symbol 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34555
 2012-12-06 22:40:21 +00:00
Florian Fainelli
1232f91efb replace the custom mtd driver with a partition parser 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34554
 2012-12-06 22:40:17 +00:00
Florian Fainelli
b516c8d89d cleanup PCI controller code 
At some point we should make the ADM5120 PCI controller driver a real
platform driver and share that one between the two targets.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34553
 2012-12-06 22:40:12 +00:00
Florian Fainelli
1ed763b888 cleanup and make interrupt code more robust 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34552
 2012-12-06 22:40:02 +00:00
Florian Fainelli
47ccbaaa91 remove frequency from /proc/cpuinfo 
This is not the place to expose it and duplicates code reading the
system frequency.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34551
 2012-12-06 22:39:57 +00:00
Florian Fainelli
e37f6fb458 provide a system clock to be used by the MIPS timer 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34550
 2012-12-06 22:39:52 +00:00
Florian Fainelli
79c2ce01b7 get rid of the UART defines 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34549
 2012-12-06 22:39:47 +00:00
Florian Fainelli
afc2b07be1 get rid of the specific UART driver and use AMBA PL010 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34548
 2012-12-06 22:39:43 +00:00
Florian Fainelli
2dee2133c5 implement early_printk without an early_console 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34547
 2012-12-06 22:39:33 +00:00
Florian Fainelli
f85115efd8 simplify IRQ controller code 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34546
 2012-12-06 22:39:27 +00:00
Florian Fainelli
50303d52e2 use platform_add_devices 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34545
 2012-12-06 22:39:22 +00:00
Florian Fainelli
192c1e90bc move time related functions to their own file 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34544
 2012-12-06 22:39:18 +00:00
Florian Fainelli
1f939889ca move setup-related functions to their own file 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34543
 2012-12-06 22:39:08 +00:00
Felix Fietkau
abc03de599 kernel: add missing config symbols 
SVN-Revision: 34532
 2012-12-06 14:11:16 +00:00
Felix Fietkau
a3843e7ec7 kernel 3.6+: nuke obsolete patches that are messing up oprofile builds 
SVN-Revision: 34506
 2012-12-05 16:49:48 +00:00
Florian Fainelli
512baafc6b kernel/3.3: move OHCI and EHCI platform drivers to generic 
These patches are not specific to bcm47xx and will be used on other
platforms as well.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34501
 2012-12-05 14:18:05 +00:00
Florian Fainelli
822ee5053e cns3xxx: fix dwc_otg driver compat with udc-core 
function.  This removes those from the dwc_otg driver and removes the patch
that comments out the linkage of udc-core so that the dwc_otg driver can
co-exist happily with other USB Device Controllers.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34475
 2012-12-04 16:19:18 +00:00
Florian Fainelli
fd0729f35c cns3xxx: advertise pcie usb usbgadget features 
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34474
 2012-12-04 16:19:12 +00:00
Florian Fainelli
d9d0814fc2 Fix Comtrend AR-5381u Power LED 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34471
 2012-12-04 15:19:50 +00:00
Florian Fainelli
d3cda51994 do no longer rename amba-pl010 serial devices names 
Back in the days when we could not override /etc/inittab, it made a lot
of sense to rename ttyAM to ttyS since this was the only supported
serial device(s), we can now just put in an appropriate /etc/inittab file
now.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34469
 2012-12-03 16:18:40 +00:00
Felix Fietkau
a7220cd9f8 kernel: disable more pci quirks to save space on platforms that don't need them 
SVN-Revision: 34467
 2012-12-03 10:33:47 +00:00
Felix Fietkau
ec885796c0 kernel 3.6+: switch to a crc32 implementation that is more suitable for small caches. reduces kernel image size by ~22 KiB on mips 
SVN-Revision: 34461
 2012-12-02 18:37:41 +00:00
Felix Fietkau
24b31c9428 kernel: fix stripping symbol exports 
SVN-Revision: 34458
 2012-12-02 17:42:17 +00:00
Hauke Mehrtens
2ac9ac5163 brcm47xx: read sprom vars without prefix for boardrev and boardtype if the prefixed one is not available. 
SVN-Revision: 34454
 2012-12-02 16:11:39 +00:00
Felix Fietkau
38d3b8d0ea kernel: patch in a working copy of elf.h instead of using relative path based hackery in #include statements 
SVN-Revision: 34449
 2012-12-02 15:26:19 +00:00
Gabor Juhos
e0e43655ce ramips: fix serial console for Belkin F5D8235 v1/v2 
Based on a patch from #12533.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34445
 2012-12-02 14:16:12 +00:00
Gabor Juhos
890f83dfb3 Update linux-atm fixes to reflect the final upstream pull request 
[juhosg: refresh the patches with quilt]

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34443
 2012-12-02 13:04:04 +00:00
Florian Fainelli
527afd0e9a remove target 
This target is unused, does not support any off the shelf hardware and
has been a maintenance burden for quite some time now.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34430
 2012-11-30 10:53:47 +00:00
Florian Fainelli
c830644d97 remove Linux 3.3 support 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34426
 2012-11-29 21:43:02 +00:00
Florian Fainelli
763f780553 use a default kernel command-line to mount squashfs and jffs2 
This fixes bug #9055.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34424
 2012-11-29 21:42:53 +00:00
Gabor Juhos
7cde0281f4 kernel: Fix 8139cp ring buffer initialisation, tx timeout recovery, add BQL 
Patches queued upstream in net-next.git

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34415
 2012-11-29 17:58:28 +00:00
Gabor Juhos
4f5defdc3b ar71xx: switch to 3.6.8 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34414
 2012-11-29 17:53:42 +00:00
Gabor Juhos
ea17e36482 kernel: Update Geos to 3.6.8 
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34411
 2012-11-29 17:37:19 +00:00
Gabor Juhos
543c2c27d1 kernel: Add ATM fixes pending upstream merge (queue reduction, race fixes) 
Patches about to go into net-next.git

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34410
 2012-11-29 17:37:18 +00:00
Gabor Juhos
df6727639a kernel: Add missing CONFIG_BATTERY_DS2781 option to generic 3.6 config 
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34409
 2012-11-29 17:37:16 +00:00
Gabor Juhos
44131bd785 ramips: rt305x: add profile and build image for the Asus RT-N13U 
Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34407
 2012-11-29 17:37:14 +00:00
Gabor Juhos
d3994b7408 ramips: rt305x: add user-space support for the Asus RT-N13U 
Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34406
 2012-11-29 17:37:13 +00:00
Gabor Juhos
0ec59e6235 ramips: rt305x: add kernel support for the Asus RT-N13U Wireless-N300 Router 
The work has been backported from openwrt-dreambox with
some modifications & code cleanup.

* updated config-3.3
* updated config-3.6
* renamed rt-n13 to rt-n13u
* fixed mach-rt-n13u.c

[juhosg: move user-space support and image generation into separate
patches]

Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34405
 2012-11-29 17:37:11 +00:00
Gabor Juhos
c2f018fca2 remove common symbols from 3.6 configs 
The removed symbols are present in the generic configuration.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34404
 2012-11-29 15:21:41 +00:00
Gabor Juhos
1f516235ea remove common symbols from 3.3 configs 
The removed symbols are present in the generic configuration.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34403
 2012-11-29 15:21:35 +00:00
Gabor Juhos
3a4d0ebd5c kernel: update linux 3.6 to 3.6.8 
Also refresh the affected patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34402
 2012-11-29 07:42:19 +00:00
Florian Fainelli
ee16e144bb use physmap-flash part_probe_types 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34398
 2012-11-27 18:42:49 +00:00
Florian Fainelli
0588d13a3e Fix typo in 96338GW power LED. 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34396
 2012-11-27 18:42:42 +00:00
Florian Fainelli
dd852e242d add AudioCodes AC495 SoC 
Found in the AudioCodes Tulip AC494 ATA.

Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34395
 2012-11-27 18:42:39 +00:00
Florian Fainelli
d59ba20030 do not call clk_put() on the timer clock 
We don't support disabling the clock, but this is actually what it would do.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34394
 2012-11-27 18:42:36 +00:00
Florian Fainelli
5d6208f34d do not list specific board compatible strings 
The general practice is to use the general SoC compatible string in both the
DTS and the board specific .c file.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34393
 2012-11-27 18:42:32 +00:00
Florian Fainelli
94b7be6dd7 remove unused variables from Makefile.boot 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34392
 2012-11-27 18:42:28 +00:00
Hauke Mehrtens
efd00e6240 brcm47xx: fix title of Bcm4705-wl profile 
SVN-Revision: 34378
 2012-11-25 16:41:00 +00:00
Hauke Mehrtens
a3d976aff5 brcm47xx: add profile for bcm4705 with wl driver 
SVN-Revision: 34336
 2012-11-25 16:15:27 +00:00
Gabor Juhos
57b7879a4e ramips: ramips_eth: use Kconfig definition to enable debug 
The Kconfig identifier to enable debugging in the driver was different from the
actually used one. Fix that.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34332
 2012-11-25 14:25:54 +00:00
Gabor Juhos
21d5df8700 ramips: add DIR-615 D userspace support 
Commit 7c8edac25f23c4fc14239fdc293caa1317649944 introduced new machine and
Makefile changes to build images for this target. However, without the userspace
bits a ramips machine can't use wifi as the necessary "eeprom" data is to be
extracted by a hotplug script; also, sysupgrade support and default led
configuration are missing.

An IRC user reported these changes allowed him to use wifi on his hardware.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34331
 2012-11-25 14:25:27 +00:00
Hauke Mehrtens
608efcdbd0 kernel: add CONFIG_BCMA_POSSIBLE=y to generic config as it is set in most of the target configs. 
SVN-Revision: 34330
 2012-11-25 14:14:17 +00:00
Hauke Mehrtens
aa8e887a46 brcm47xx: whitespace cleanups 
SVN-Revision: 34329
 2012-11-25 14:03:51 +00:00
Hauke Mehrtens
be77f9951c brcm47xx: fix cpu clock detection on ASUS WL-520gU 
The ASUS WL-520gU and some other similar Asus devices have a BCM5354
running at 200MHZ and not at 240 which is the default for this SoC.

This fixes #4083.

SVN-Revision: 34325
 2012-11-24 20:28:06 +00:00
Hauke Mehrtens
264873b3c5 brcm47xx: watchdog: deactivate NOWAYOUT. 
In the old configuration the SoC issued a reboot if the watchdog was
killed also if it was kill with TERM and not KILL.

This will fix #11724.

SVN-Revision: 34324
 2012-11-24 20:24:27 +00:00
Hauke Mehrtens
c62d86ecb8 brcm47xx: update watchdog driver 
This watchdog driver should work with SoC having a PMU.

This fixes #11720.

SVN-Revision: 34323
 2012-11-24 20:07:25 +00:00
Jonas Gorski
60e0e0d6e6 bcm63xx: Add a fixup for rt2x00 devices. 
This patch adds support for defining rt2x00 eeprom data.
This eeprom data can be extracted from flash or loaded directly from a firmware file.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 34322
 2012-11-24 14:19:22 +00:00
Jonas Gorski
746b4cec06 bcm63xx: Enable LED pin support for ath9k pci fixup. 
Some boards need specifying LED pin in order to get it working.
For example, in board HW556 (Huawei HG556a) "led_pin" must be "2".
By default led_pin is "0", so dsl_274xb_rev_f is changed to "-1".

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 34321
 2012-11-24 14:19:16 +00:00
Jonas Gorski
1baeede939 bcm63xx: fix spi transfer handling 
* Accept transfers without bits_per_word set.

* Work around the inability of the hardware of keeping CS asserted.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 34320
 2012-11-24 14:19:09 +00:00
Gabor Juhos
b0b994cf76 ar71xx: set pad6 cfg for AR8327 on the AP136 board 
Also override the pll_1000 value. Without these settings
ethernet suffers from packet loss.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34316
 2012-11-23 20:55:34 +00:00
Gabor Juhos
49d4b5581d generic: ar8216: set delay values for SGMII mode on AR8327 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34315
 2012-11-23 20:55:26 +00:00
Gabor Juhos
3205b52d1c generic: ar8216: introduce ar8216_mib_op helper 
The ar8216_mib_{capture,flush} functions are similar.
Move the common code into a helper and use that from
the original functions.

This change also fixes a lockdep warning in
ar8216_mib_flush.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34297
 2012-11-22 10:33:03 +00:00
Gabor Juhos
10d30f2d2d swconfig: make it compatible with 3.7 
swconfig does not compile with 3.7 because

struct netlink_notify->pid    has been renamed to
struct netlink_notify->portid

and

struct genl_info->snd_pid     has been renamed to
struct genl_info->snd_portid

Use the new names and add compatibility patches
to 3.3 and 3.6.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34288
 2012-11-21 17:38:11 +00:00
John Crispin
f7ead0a2d5 adds proper package selection for dgn3500 
SVN-Revision: 34286
 2012-11-21 06:06:48 +00:00
Gabor Juhos
e20a0baa04 cns21xx: add support for 3.6 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34285
 2012-11-20 21:37:53 +00:00
Gabor Juhos
5c740aa23c generic: add some missing symbols for 3.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34284
 2012-11-20 21:34:43 +00:00
Gabor Juhos
2a792f32b5 generic: ar8216: fix port number check in 'ar8xxx_mib_work_func' 
Also add a WARN_ON to 'ar8216_mib_fetch_port_stat'

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34283
 2012-11-20 20:40:04 +00:00
Gabor Juhos
258b2f2dc2 generic: ar8216: remove an unblanced mutex_unlock call 
Fixes the following warning:

[   94.080000]
[   94.080000] =====================================
[   94.080000] [ BUG: bad unlock balance detected! ]
[   94.080000] 3.3.8 #2 Tainted: G           O
[   94.080000] -------------------------------------
[   94.080000] swconfig/1220 is trying to release lock (&priv->mib_lock) at:
[   94.080000] [<801df8f4>] ar8216_sw_get_port_mib+0x138/0x16c
[   94.080000] but there are no more locks to release!
[   94.080000]
[   94.080000] other info that might help us debug this:
[   94.080000] 2 locks held by swconfig/1220:
[   94.080000]  #0:  (genl_mutex){+.+...}, at: [<80222430>] genl_rcv+0x14/0x34
[   94.080000]  #1:  (&dev->sw_mutex){+.+...}, at: [<801da018>] swconfig_get_dev+0x88/0xb4
[   94.080000]
[   94.080000] stack backtrace:
[   94.080000] Call Trace:
[   94.080000] [<8028dc58>] dump_stack+0x8/0x34
[   94.080000] [<800a5128>] print_unlock_inbalance_bug+0xe0/0xfc
[   94.080000] [<800a82c0>] lock_release+0x18c/0x1c8
[   94.080000] [<80292074>] __mutex_unlock_slowpath+0xd8/0x17c
[   94.080000] [<801df8f4>] ar8216_sw_get_port_mib+0x138/0x16c
[   94.080000] [<801db688>] swconfig_get_attr+0xbc/0x394
[   94.080000] [<8022261c>] genl_rcv_msg+0x1cc/0x214
[   94.080000] [<80221a18>] netlink_rcv_skb+0x6c/0xe8
[   94.080000] [<80222440>] genl_rcv+0x24/0x34
[   94.080000] [<80221370>] netlink_unicast+0x15c/0x22c
[   94.080000] [<8022175c>] netlink_sendmsg+0x240/0x2d0
[   94.080000] [<801ef544>] sock_sendmsg+0x84/0x9c
[   94.080000] [<801f0648>] __sys_sendmsg+0x1cc/0x270
[   94.080000] [<801f207c>] sys_sendmsg+0x48/0x7c
[   94.080000] [<8006ad78>] stack_done+0x20/0x40
[   94.080000]

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34282
 2012-11-20 20:40:03 +00:00
Gabor Juhos
82b57b0c28 generic: ar8216: add missing locking calls 
Fixes the following lockdep warning:

[   19.160000] ------------[ cut here ]------------
[   19.160000] WARNING: at drivers/net/phy/ar8216.c:322 ar8216_rmw+0x54/0xa4()
[   19.170000] Modules linked in: nf_defrag_ipv4 nf_conntrack ehci_hcd
sd_mod pppox ipt_REJECT xt_TCPMSS ipt_LOG xt_comment xt_multip
ort xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp
x_tables ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) at
h9k_hw(O) ath(O) mac80211(O) usbcore usb_common scsi_mod nls_base crc7
crc_itu_t crc_ccitt cfg80211(O) compat(O) arc4 aes_generic cry
pto_blkcipher cryptomgr aead crypto_hash crypto_algapi ledtrig_timer
ledtrig_default_on leds_gpio gpio_button_hotplug(O)
[   19.210000] Call Trace:
[   19.220000] [<8028dc38>] dump_stack+0x8/0x34
[   19.220000] [<80072da0>] warn_slowpath_common+0x78/0xa4
[   19.230000] [<80072de4>] warn_slowpath_null+0x18/0x24
[   19.230000] [<801de820>] ar8216_rmw+0x54/0xa4
[   19.240000] [<801df460>] ar8216_mib_capture+0x70/0xd0
[   19.240000] [<801df944>] ar8xxx_mib_work_func+0x34/0x98
[   19.250000] [<80089a7c>] process_one_work+0x28c/0x460
[   19.250000] [<8008a630>] worker_thread+0x22c/0x334
[   19.260000] [<8008e544>] kthread+0x88/0x90
[   19.260000] [<80065020>] kernel_thread_helper+0x10/0x18
[   19.270000]
[   19.270000] ---[ end trace 22e9d696adfa6a08 ]---

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34281
 2012-11-20 20:40:00 +00:00
Gabor Juhos
c0f73ac607 generic: convert yaffs to use kuid_t and kgid_t on 3.6+ 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34280
 2012-11-20 17:45:24 +00:00
Gabor Juhos
188908e885 ar71xx: make rb750_nand driver compatible with 3.7 
Also add compatibility patches for the currently
supported kernels.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34279
 2012-11-20 16:29:43 +00:00
Gabor Juhos
8194237789 ar71xx: make ar934x_nfc driver compatible with 3.7 
Also add compatibility patches for the currently
supported kernels.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34278
 2012-11-20 16:29:42 +00:00
Gabor Juhos
4468fd7ae4 ar71xx: refresh rb4xx_nand patch 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34277
 2012-11-20 15:53:17 +00:00
Gabor Juhos
46a3b818b9 ar71xx: remove buffer verification reference from rb4xx_nand.c 
It is a dead code.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34276
 2012-11-20 14:40:22 +00:00
Gabor Juhos
674b91ce0e ar71xx: fix GPIO function selection for AR934x 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34275
 2012-11-20 14:27:17 +00:00
Gabor Juhos
d833ca527d ar71xx: restore rb4xx kernel partition size to the original value 
The new lzma compressed elf kernel image fits into
that, even on devices with large page NAND chips.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34274
 2012-11-20 12:17:45 +00:00
Gabor Juhos
33a99ce46b ar71xx: install lzma compressed elf kernel image from wget2nand 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34273
 2012-11-20 12:17:44 +00:00
Gabor Juhos
68b5aa2fdf ar71xx/image: provide lzma compressed elf kernel image 
This will be used on the RB4xx/RB7xx/RB2011 boards.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34272
 2012-11-20 12:17:43 +00:00
Gabor Juhos
97867f8717 ar71xx/image: relink loader.elf image to LOADADDR 
This allows to load the resulting image directly
from RouterBOOT.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34271
 2012-11-20 12:17:41 +00:00
Gabor Juhos
dd092fd10c ramips: set clk_is_20mhz for rt2x00 on RT3352/RT5350 
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34270
 2012-11-20 07:19:10 +00:00
Gabor Juhos
6c1fbb2d5c mac80211/rt2x00: add rf_vals for Rt3352 with Xtal=20MHz 
[juhosg: move ramips specific stuff into a followup patch]

Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34269
 2012-11-20 07:19:09 +00:00
Gabor Juhos
8e4cefc7f8 refresh all kernel configurations 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34267
 2012-11-20 07:19:06 +00:00
Jonas Gorski
8dc72c5c4d Revert "target specific patches have nothing to do in generic.." 
This reverts commit r34230, as it is causing build failures:

 make[3] -C package/mtd compile
imagetag.c:35:32: fatal error: linux/bcm963xx_tag.h: No such file or directory
compilation terminated.
make[4]: *** [imagetag.o] Error 1

Any patches modifying exported kernel headers need to reside in generic
as toolchain/kernel-headers only applies generic patches.

SVN-Revision: 34255
 2012-11-19 12:38:26 +00:00
Imre Kaloz
4c043300fc fix 820-usb_add_usb_find_device_by_name.patch 
SVN-Revision: 34254
 2012-11-19 10:56:09 +00:00
Hauke Mehrtens
4fa5781a95 kernel: refresh patches 
SVN-Revision: 34253
 2012-11-18 21:40:30 +00:00
Hauke Mehrtens
86cc79ac98 brcm47xx: add support for kernel 3.6 
This is based on the patch by Peter Wagner.

SVN-Revision: 34252
 2012-11-18 21:27:00 +00:00
Hauke Mehrtens
db763080f4 kernel: add missing generic config options for 3.6+ 
SVN-Revision: 34250
 2012-11-18 20:54:53 +00:00
Hauke Mehrtens
c159c7a462 kernel: add CONFIG_XZ_DEC=y to generic 
CONFIG_SQUASHFS_XZ selects CONFIG_XZ_DEC so this could also be moved.

SVN-Revision: 34249
 2012-11-18 20:48:53 +00:00
Gabor Juhos
d577d69838 ar71xx: use custom LZMA dictionary size for WNDR3700 images 
Based on a patch by Hannu Nyman.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34248
 2012-11-18 20:25:13 +00:00
Imre Kaloz
935ca3f3eb add 3.7-rc6 support (patch 820 still has to be fixed) 
SVN-Revision: 34247
 2012-11-18 18:52:38 +00:00
Gabor Juhos
863657d040 generic: ar8216: add MIB counter support for the AR8216 switch as well 
Thanks to Jonas Gorski for the reference URL.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34245
 2012-11-18 16:21:00 +00:00
Gabor Juhos
98f30aac8e generic: ar8216: rename AR8216_*_STATS_* defines 
The names are misleading, those are only valid from
AR8236. The AR8216 chip uses different offsets.

Thanks to Jonas Gorski for the report.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34244
 2012-11-18 16:20:56 +00:00
Gabor Juhos
9abd8cd004 generic ar8216: allow to read/reset MIB counters via swconfig 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34243
 2012-11-18 12:26:35 +00:00
Gabor Juhos
4b17323b51 generic: ar8216: use dynamically allocated private data in ar8216_probe 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34242
 2012-11-18 12:26:34 +00:00
Gabor Juhos
169e596268 ar71xx: add user-space support for the RB435G board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34240
 2012-11-18 10:18:02 +00:00
Gabor Juhos
d44d954dec ar71xx: add kernel support for the RB435G board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34239
 2012-11-18 10:18:01 +00:00
Gabor Juhos
d62bddc620 ar71xx: update PCI IRQ map for RB4xx devices 
Should fix #12269.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34238
 2012-11-18 09:51:04 +00:00
Gabor Juhos
31881357af ar71xx: create profile and build image for the OpenMesh MR600 board 
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34237
 2012-11-18 09:32:41 +00:00
Gabor Juhos
9da2c85b67 ar71xx: enable sysupgrade for the OpenMesh MR600 
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34235
 2012-11-18 09:32:39 +00:00
Gabor Juhos
6380301d01 ar71xx: rename om2p.sh upgrade script to openmesh.sh 
It will be used on other boards as well.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34234
 2012-11-18 09:32:37 +00:00
Gabor Juhos
d325e622d2 scripts/om-fwupgradecfg-gen.sh: add support for the MR600 
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34233
 2012-11-18 09:32:36 +00:00
Gabor Juhos
c3174179b7 ar71xx: add user-space support for the OpenMesh MR600 board 
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34232
 2012-11-18 09:32:35 +00:00
Gabor Juhos
8d4857d677 ar71xx: add kernel support for the OpenMesh MR600 board 
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34231
 2012-11-18 09:32:33 +00:00
Imre Kaloz
b220071cd2 target specific patches have nothing to do in generic.. 
SVN-Revision: 34230
 2012-11-18 09:22:38 +00:00
Gabor Juhos
c90128ce31 generic: remove temporary config file introduced in r34227 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34229
 2012-11-18 08:51:56 +00:00
Gabor Juhos
ff1e854511 kernel: update linux 3.6 to 3.6.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34227
 2012-11-18 08:41:31 +00:00
Florian Fainelli
a4c205011b move patches to patches-2.6.36 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34220
 2012-11-16 16:32:55 +00:00
Florian Fainelli
974b9f5c9a remove broken flag 
The SPARC qemu target works like a charm with the following qemu command-line:

qemu-system-sparc64 -M sun4u -L /home/florian/dev/qemu/pc-bios -kernel build_dir/linux-sparc/linux-3.6.6/vmlinux -nographic

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34219
 2012-11-16 16:32:52 +00:00
Florian Fainelli
5261a171e9 update to kernel 3.6.6 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34218
 2012-11-16 16:32:49 +00:00
Florian Fainelli
7e199fcc06 add missing framebuffer config symbol 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34217
 2012-11-16 16:32:45 +00:00
Florian Fainelli
b7f2f14801 advertise jffs2, squashfs and ext4 features 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34216
 2012-11-16 16:32:42 +00:00
Florian Fainelli
c6d9304d17 resync kernel configuration with 3.6 kernel 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34215
 2012-11-16 16:32:39 +00:00
Florian Fainelli
dd70319e6d build root filesystems and install them in $(BIN_DIR) 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34214
 2012-11-16 16:32:36 +00:00
Florian Fainelli
8ad0b56ba5 do not build crashlog on sparc too 
This is crashing the kernel in crashlog_init_fs(), until fixed, disable it
for SPARC too.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34213
 2012-11-16 16:32:33 +00:00
Florian Fainelli
19811eddb4 switch to kernel 3.6.6 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34212
 2012-11-16 16:32:29 +00:00
Florian Fainelli
f98ac68e0e add support for 3.6 kernel 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34211
 2012-11-16 16:32:26 +00:00
Florian Fainelli
c555479127 move acx-mac80211 to the ar7 generic target 
None of the AC49x boards that we support actually have Wi-Fi.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34208
 2012-11-16 13:00:55 +00:00
Florian Fainelli
b763d47bfe 3.6: add some framebuffer related config symbols 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34207
 2012-11-16 13:00:51 +00:00
Florian Fainelli
bc73cf5345 push atm, br2684ctl and kmod-pppoa down the DSL Profile 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34206
 2012-11-16 13:00:48 +00:00
Hauke Mehrtens
485f9573f8 brcm47xx: revert r33935: check for .ELF header in partition parser 
For sysupgrade the generic image should be used and the special image for the wgt634u is just needed for initial flashing over CFE.
russell reported that with this patch sysupgrdae did not worked for him any more and he could not reproduce the error described in #11420.
With the patch the linux partition also contained the loader which is in the first 128KB.

SVN-Revision: 34201
 2012-11-15 16:39:45 +00:00
Gabor Juhos
7da001d068 scripts: rename om2p-fwupgradecfg-gen.sh to more generic om-fwupgradecfg-gen.sh 
It will be used for non OM2P boards as well.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34200
 2012-11-14 14:18:33 +00:00
Gabor Juhos
ee94ed4597 ar71xx: add profile and build image for the Ubiquiti UniFi AP-Outdoor board 
Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34198
 2012-11-13 20:57:19 +00:00
Gabor Juhos
9c5c079329 ar71xx: add user-space support for the Ubiquiti UniFi AP-Outdoor board 
Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34197
 2012-11-13 20:57:18 +00:00
Gabor Juhos
75c1d3ccc2 ar71xx: add support for the Ubiquiti UniFi AP-Outdoor device 
[juhosg:
  - rename and refresh 660-MIPS-ath79-ubnt-xm-add-unifi-outdoor patches
  - wrap long lines in mach-ubnt-xm
  - remove default network config, set it from uci-defaults/network
    instead
  - remove user-space, and image generation stuff]

Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34196
 2012-11-13 20:57:17 +00:00
Gabor Juhos
7ab0e1566f ar71xx: add profiles and build images for old PowerCloud System devices 
[juhosg:
  - use 'PowerCloud Systems' instead of 'PCS' in the profiles
  - sort SingleProfile instances in image/Makefile]

Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34195
 2012-11-13 20:57:15 +00:00
Gabor Juhos
f6c3a8ddd6 generic: refresh 3.6 patches 
SVN-Revision: 34194
 2012-11-13 20:57:13 +00:00
Florian Fainelli
e7f77f2742 fix badly named patch file 
SVN-Revision: 34193
 2012-11-13 17:39:44 +00:00
Florian Fainelli
857456aef8 switch to kernel 3.6.6 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34192
 2012-11-13 17:20:19 +00:00
Florian Fainelli
390b8eb864 fix CBUS UART registration 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34191
 2012-11-13 17:20:14 +00:00
Gabor Juhos
62c8ff19ad ar71xx: add profile and build image for the TL-WA7510N board 
[juhosg: separated from the http://patchwork.openwrt.org/patch/2820/ patch]

Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34190
 2012-11-13 14:48:03 +00:00
Gabor Juhos
165b7d2173 ar71xx: user space support for the TL-WA7510N 
[juhosg: separated from the http://patchwork.openwrt.org/patch/2820/ patch]

Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34188
 2012-11-13 14:48:01 +00:00
Gabor Juhos
91bab828aa ar71xx: add support for TP-Link TL-WA7510N 
It is mostly the same as TL-WA901N. WLAN and LAN
are working. LAN LED is working. WLAN signal
strength LEDs are not working yet.

http://wiki.openwrt.org/toh/tp-link/tl-wa7510n?s[]=wa7510n

[juhosg:
  - cleanup commit message
  - move non kernel related stuff into separate changes
  - rename and refresh 615-MIPS-ath79-TL-WA7510N-v1-support patch
  - merge WA7510N support into the mach-tl-wa901nd.c file
  - add 3.6 support]

Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34187
 2012-11-13 14:48:00 +00:00
Gabor Juhos
ce9d4fadfa ar71xx: refresh patches 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34186
 2012-11-13 14:47:58 +00:00
John Crispin
3b419e506c fixes ar9 / dgn3500 support 
SVN-Revision: 34180
 2012-11-13 08:54:14 +00:00
John Crispin
dd8c625424 previous commit pushed 1 file too many ;) 
SVN-Revision: 34179
 2012-11-12 21:36:23 +00:00
John Crispin
ced0cf3a94 move ethernet hw init to init/uninit functions 
This should fix the stalled irq problem seen by several people.
This is not the real fix, but rather moves the bug to the un/init patch of the driver.
The real bug still needs to be fixed, but this workaround should be suffcient to make
the ethernet stable.

SVN-Revision: 34177
 2012-11-12 21:35:01 +00:00
Hauke Mehrtens
31541f81c3 brcm47xx: remove double definition of kmod-tg3 added in r34150 
SVN-Revision: 34176
 2012-11-12 21:34:00 +00:00
Hauke Mehrtens
bac93bdd8e brcm47xx: fix cfe config detection on WGT634U broken in r33920 
Thanks Russell Senior for reporting this.

SVN-Revision: 34175
 2012-11-12 21:32:33 +00:00
Luka Perkov
00243027dd cns3xxx: merge gpio patches 
SVN-Revision: 34174
 2012-11-12 19:27:30 +00:00
Luka Perkov
fb9b572f0a cns3xxx: fix build failure after r34168 
SVN-Revision: 34173
 2012-11-12 19:27:29 +00:00
Florian Fainelli
a8c492dbb3 MIPS: add a build fix for arch/mips/boot/compressed/decompress.c 
And get rid of the AR7 patch because at least the Alchemy SoC also needs it

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34170
 2012-11-12 12:49:47 +00:00
Imre Kaloz
5cddb170cd reorder, rename and refresh patches 
SVN-Revision: 34169
 2012-11-12 09:18:00 +00:00
Imre Kaloz
77504ac06f split spi patch, follow mainline file naming 
SVN-Revision: 34168
 2012-11-12 08:22:14 +00:00
Imre Kaloz
9a780e0328 split the i2c patch, merge the retry fixup 
SVN-Revision: 34167
 2012-11-12 08:21:38 +00:00
John Crispin
5f30fe31b6 move redboot boardconfig patch into target folder 
SVN-Revision: 34166
 2012-11-12 07:56:37 +00:00
Imre Kaloz
527c473674 add support for the Tonze AP-422/425 
SVN-Revision: 34165
 2012-11-11 21:04:30 +00:00
Imre Kaloz
ee9e3bf82e refresh patch 
SVN-Revision: 34164
 2012-11-11 21:03:52 +00:00
Imre Kaloz
dcfd6cd5a4 generate single images for tftp flashing as well as sysupgrade images for boards with old u-boot 
SVN-Revision: 34163
 2012-11-11 20:57:04 +00:00
Luka Perkov
16275bdd15 cns3xxx: convert dwc_otg patches to files 
SVN-Revision: 34162
 2012-11-11 20:03:58 +00:00
Luka Perkov
e38adfc912 cns3xxx: convert ethernet patches to files 
SVN-Revision: 34161
 2012-11-11 20:03:56 +00:00
Jonas Gorski
306894b88f bcm63xx: switch to 3.6.6 
SVN-Revision: 34160
 2012-11-11 19:57:17 +00:00
Imre Kaloz
4658e463d9 move fixed mapping of internal devices into vmalloc region 
SVN-Revision: 34158
 2012-11-11 19:29:27 +00:00
Florian Fainelli
9760644af4 advertise squashfs feature 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34157
 2012-11-11 19:26:54 +00:00
Florian Fainelli
dd541cbefa add support for Linux 3.6 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34156
 2012-11-11 19:26:50 +00:00
Florian Fainelli
f7fcb3c845 split kernel config between generic, au1500 and au1550 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34155
 2012-11-11 19:26:44 +00:00
Florian Fainelli
b363a7e491 add support for Linux 3.6 
SVN-Revision: 34154
 2012-11-11 18:41:09 +00:00
Florian Fainelli
854c504781 move files directory to files-3.3 
SVN-Revision: 34153
 2012-11-11 18:40:48 +00:00
Hauke Mehrtens
cadd36a303 brcm47xx: remove ssb-gige package 
CONFIG_SSB_DRIVER_GIGE is set in the target config of the brcm47xx target, so it will always be activated and the kmod-ssb-gige is not needed any more.
The kmod-ssb-gige package is not generated in an build as it does not contain any files and the makes the image builder fail when generating a image integrating this package.

SVN-Revision: 34150
 2012-11-11 17:30:33 +00:00
Florian Fainelli
62c9156af6 generate image for AC49x 
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34149
 2012-11-11 16:11:39 +00:00
Florian Fainelli
9c7d221d47 create AC49x subtarget 
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34148
 2012-11-11 16:11:34 +00:00
Florian Fainelli
668234c109 create generic subtarget 
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34147
 2012-11-11 16:11:29 +00:00
Florian Fainelli
4891549bcd detect AC49x flash partitions 
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34146
 2012-11-11 16:11:22 +00:00
Florian Fainelli
feb968d964 support AC49x bootloader environment 
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34145
 2012-11-11 16:11:14 +00:00
Florian Fainelli
7d09c61d65 add AudioCodes AC49x platform support to kernel 
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34144
 2012-11-11 16:11:09 +00:00
Florian Fainelli
d9b89db380 free memory below kernel offset 
Some bootloaders (e.g. PSPBoot on AC49x) have a load-offset, this frees that
memory region so it is usable for Linux.

Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34143
 2012-11-11 16:11:00 +00:00
Jo-Philipp Wich
298a8e2300 x86/generic: don't disable usbfs (#12452) 
SVN-Revision: 34139
 2012-11-10 23:28:58 +00:00
Jonas Gorski
c54fa281b1 bcm63xx: fix compilation with kmod-ohci enabled with 3.6 
Fixes the following error:

drivers/usb/host/ohci-bcm63xx.c: In function 'ohci_bcm63xx_start':
drivers/usb/host/ohci-bcm63xx.c:33:3: error: implicit declaration of function 'err' [-Werror=implicit-function-declaration]

Reported-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 34138
 2012-11-10 22:10:47 +00:00
Jonas Gorski
15519bec9c bcm63xx: add two missing usb patches to 3.6 
SVN-Revision: 34137
 2012-11-10 19:59:16 +00:00
Jonas Gorski
06ad6ffe16 bcm63xx: fix Ethernet DMA for 636x and 6328 for 3.6 
SVN-Revision: 34136
 2012-11-10 19:59:07 +00:00
Imre Kaloz
f3f3f52259 cns3xxx: clean up pcie patches 
Combine two pcie patches (2nd patch undid the 1st patch) together
and refresh the other affected patches

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 34132
 2012-11-09 21:37:54 +00:00
John Crispin
71ddec8091 add more profiles 
SVN-Revision: 34131
 2012-11-09 19:26:58 +00:00
John Crispin
88e4d93802 a few more dts files (WIP) 
SVN-Revision: 34130
 2012-11-09 19:26:43 +00:00
John Crispin
a30b3066ce add mtd split and atm patch 
SVN-Revision: 34129
 2012-11-09 19:26:30 +00:00
Felix Fietkau
46288bf98e x86: use $(strip) for the at_keyboard check 
SVN-Revision: 34127
 2012-11-09 10:53:36 +00:00
Felix Fietkau
0a9e05fb0e x86: only enable at_keyboard for the generic and kvm_guest subtargets to avoid hangs on alix2 and others (thx, russell) 
SVN-Revision: 34126
 2012-11-09 10:19:51 +00:00
Gabor Juhos
502661f685 generic: sanitize deps_initramfs list 
If any filename in the intramfs dependency
list contains a colon, that causes a kernel
build error like this:

/devel/openwrt/build_dir/linux-ar71xx_generic/linux-3.6.6/usr/Makefile:58: *** multiple target patterns.  Stop.
make[5]: *** [usr] Error 2

Fix it by removing such filenames from the
deps_initramfs list.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34125
 2012-11-09 09:07:29 +00:00
Luka Perkov
965c190444 cns3xxx: exit from laguna late_initcall if not running on laguna board 
SVN-Revision: 34120
 2012-11-08 11:31:56 +00:00
Imre Kaloz
0da0dc0f2b cns3xxx: add PPS support for laguna 
Many Laguna products have on-board GPS with Pulse-per-second (PPS)
support.  This patch adds kernel support (statically) and adds
the platform data in laguna board support.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 34115
 2012-11-08 05:42:31 +00:00
Imre Kaloz
efcdc21824 fixup symbol selection 
SMP already selects HAVE_ARM_TWD and HAVE_ARM_SCU,
ARCH_CNS3XXX already selects MIGHT_HAVE_PCI

SVN-Revision: 34114
 2012-11-08 05:40:34 +00:00
Luka Perkov
4d66b749de cns3xxx: fix coding style in board script 
SVN-Revision: 34113
 2012-11-07 23:12:06 +00:00
John Crispin
6090ddc896 adds fon20n profile 
SVN-Revision: 34112
 2012-11-07 20:26:31 +00:00
John Crispin
3991526989 ramips: use kernel 3.6.6 
## Booting image at 80800000 ...
   Image Name:   MIPS OpenWrt Linux-3.6.6
   Created:      2012-11-06  14:19:54 UTC

 System Control Status = 0x20440000
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    3560768 Bytes =  3.4 MB
   Load Address: 80000000
   Entry Point:  80000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80000000) ...
## Giving linux memsize in MB, 32

Starting kernel ...

[    0.000000] Linux version 3.6.6 (daniel@localhost.localdomain) (gcc version 4.6.4 20121001 (prerelease) (Linaro GCC 4.6-2012.10) ) #2 Tue Nov 6 16:19:48 IST 2012
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 0001964c (MIPS 24KEc)
[    0.000000] Ralink RT3052 id:1 rev:2 running at 384.00 MHz
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x01ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x01ffffff]
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line:  console=ttyS1,57600n8 board=ALL0239-3G mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),6976k(rootfs),7872k@0x50000(firmware) rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Writing ErrCtl register=0000c388
[    0.000000] Readback ErrCtl register=0000c388
[    0.000000] Memory: 27048k/32768k available (2015k kernel code, 5720k reserved, 498k data, 2676k init, 0k highmem)
[    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:48
[    0.000000] console [ttyS1] enabled, bootconsole disabled
[    0.000000] console [ttyS1] enabled, bootconsole disabled
[    0.010000] Calibrating delay loop... 255.59 BogoMIPS (lpj=1277952)
[    0.090000] pid_max: default: 32768 minimum: 301
[    0.100000] Mount-cache hash table entries: 512
[    0.110000] NET: Registered protocol family 16
[    0.120000] MIPS: machine is Allnet ALL0239-3G
[    0.140000] bio: create slab <bio-0> at 0
[    0.150000] Switching to clocksource MIPS
[    0.160000] NET: Registered protocol family 2
[    0.170000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[    0.180000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.200000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.210000] TCP: reno registered
[    0.220000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.230000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.240000] NET: Registered protocol family 1
[    5.460000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    5.470000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    5.490000] msgmni has been set to 52
[    5.500000] io scheduler noop registered
[    5.510000] io scheduler deadline registered (default)
[    5.520000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    5.530000] serial8250: ttyS0 at MMIO 0x10000500 (irq = 13) is a 16550A
[    5.550000] serial8250: ttyS1 at MMIO 0x10000c00 (irq = 20) is a 16550A
[    5.560000] physmap platform flash device: 00800000 at bf000000
[    5.580000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000
[    5.600000] Amd/Fujitsu Extended Query Table at 0x0040
[    5.610000]   Amd/Fujitsu Extended Query version 1.3.
[    5.620000] number of CFI chips: 1
[    5.620000] 6 cmdlinepart partitions found on MTD device physmap-flash.0
[    5.640000] Creating 6 MTD partitions on "physmap-flash.0":
[    5.650000] 0x000000000000-0x000000030000 : "u-boot"
[    5.660000] 0x000000030000-0x000000040000 : "u-boot-env"
[    5.680000] 0x000000040000-0x000000050000 : "factory"
[    5.690000] 0x000000050000-0x000000130000 : "kernel"
[    5.700000] 0x000000130000-0x000000800000 : "rootfs"
[    5.710000] mtd: partition "rootfs" set to be root filesystem
[    5.730000] split_squashfs: error occured while reading from "physmap-flash.0"
[    5.740000] 0x000000050000-0x000000800000 : "firmware"
[    5.760000] ramips-wdt ramips-wdt: timeout value must be 0 < timeout <= 33, using 33
[    5.780000] TCP: cubic registered
[    5.780000] NET: Registered protocol family 17
[    5.790000] 8021q: 802.1Q VLAN Support v1.8
[    5.820000] Freeing unused kernel memory: 2676k freed
[    6.490000] Button Hotplug driver version 0.4.1
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
- init -

Please press Enter to activate this console. [   10.150000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993
[   10.170000] Backport based on wireless-testing.git master-2012-09-07
[   10.180000] compat.git: wireless-testing.git
[   10.210000] cfg80211: Calling CRDA to update world regulatory domain
[   10.230000] cfg80211: World regulatory domain updated:
[   10.240000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   10.250000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.270000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   10.280000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   10.300000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.310000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.430000] NET: Registered protocol family 10
[   10.760000] PPP generic driver version 2.4.2
[   10.820000] l2tp_core: L2TP core driver, V2.0
[   10.840000] l2tp_netlink: L2TP netlink interface
[   10.870000] sit: IPv6 over IPv4 tunneling driver
[   10.920000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   11.060000] NET: Registered protocol family 24
[   11.090000] nf_conntrack version 0.5.0 (464 buckets, 1856 max)
[   11.230000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[   11.410000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   14.510000] device eth0.1 entered promiscuous mode
[   14.520000] device eth0 entered promiscuous mode
[   14.530000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[   14.550000] br-lan: port 1(eth0.1) entered forwarding state
[   14.560000] br-lan: port 1(eth0.1) entered forwarding state
[   16.560000] br-lan: port 1(eth0.1) entered forwarding state
[   16.600000] ramips-wdt: timeout value 60 must be 0 < timeout <= 33, using 33

BusyBox v1.19.4 (2012-11-06 13:40:37 IST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 BARRIER BREAKER (Bleeding Edge, r34079)
 -----------------------------------------------------
  * 1/2 oz Galliano         Pour all ingredients into
  * 4 oz cold Coffee        an irish coffee mug filled
  * 1 1/2 oz Dark Rum       with crushed ice. Stir.
  * 2 tsp. Creme de Cacao
 -----------------------------------------------------
root@OpenWrt:/#

SVN-Revision: 34111
 2012-11-07 20:26:21 +00:00
John Crispin
480892226d ramips: add HAVE_CLK to Kconfig on all ramips socs 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 34110
 2012-11-07 20:26:04 +00:00
John Crispin
feb31be6af ramips: add linux-3.6 configuration for ramips socs 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

 create mode 100644 target/linux/ramips/rt288x/config-3.6
 create mode 100644 target/linux/ramips/rt305x/config-3.6
 create mode 100644 target/linux/ramips/rt3883/config-3.6

SVN-Revision: 34109
 2012-11-07 20:25:55 +00:00
John Crispin
ca1fcaed5b ramips: port patches to linux-3.6 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

 create mode 100644 target/linux/ramips/patches-3.6/001-mips-add-cp0-compare-irq-function.patch
 create mode 100644 target/linux/ramips/patches-3.6/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch
 create mode 100644 target/linux/ramips/patches-3.6/011-mtd-cfi_cmdset_0002-force-word-write.patch
 create mode 100644 target/linux/ramips/patches-3.6/100-mips-ralink-core.patch
 create mode 100644 target/linux/ramips/patches-3.6/101-rt288x_serial_driver_hack.patch
 create mode 100644 target/linux/ramips/patches-3.6/102-rt288x-pci-driver-hook.patch
 create mode 100644 target/linux/ramips/patches-3.6/103-ethernet.patch
 create mode 100644 target/linux/ramips/patches-3.6/104-ramips-watchdog-driver.patch
 create mode 100644 target/linux/ramips/patches-3.6/105-ramips-spi-driver.patch
 create mode 100644 target/linux/ramips/patches-3.6/105-usb_dwc_otg.patch
 create mode 100644 target/linux/ramips/patches-3.6/106-rt3883-pci-support.patch
 create mode 100644 target/linux/ramips/patches-3.6/200-rt3883-ehci-glue.patch
 create mode 100644 target/linux/ramips/patches-3.6/201-rt3883-ohci-glue.patch

SVN-Revision: 34108
 2012-11-07 20:25:34 +00:00
Jonas Gorski
f2bb7754f5 bcm63xx: Enable endian check support for ath9k pci fixup. 
Some ath9k caldatas need to be "endian checked".
This patch allows selecting wether to enable endian check or not.
Endian check is disabled by default.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 34105
 2012-11-07 09:01:03 +00:00
Imre Kaloz
f2b75b517b fixup typos in the compex patch 
SVN-Revision: 34104
 2012-11-07 07:51:24 +00:00
Jonas Gorski
a50d121d8e linux: export bcm963xx_tag.h to userspace 
Export bcm963xx_tag.h so mtd can use it without using kernel includes.

Signed-off-by: Catalin Patulea <cat@vv.carleton.ca>
[jonas.gorski@gmail.com: fixup bcm63xx patches, completely remove header
 from original location, refresh patches, use  a more matching patch
 number, port to 3.6]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

SVN-Revision: 34103
 2012-11-06 15:21:46 +00:00
Luka Perkov
865933a0ec cns3xxx: refresh kernel config file 
SVN-Revision: 34102
 2012-11-06 11:16:43 +00:00
Luka Perkov
9a5c26d4ef cns3xxx: use files directory 
SVN-Revision: 34101
 2012-11-06 11:16:41 +00:00
John Crispin
7404e59bbd add OWRTDTB marker patch 
SVN-Revision: 34100
 2012-11-06 10:39:43 +00:00
John Crispin
3a1851964e add support for arv7525 
SVN-Revision: 34097
 2012-11-06 07:38:24 +00:00
Imre Kaloz
e141cbb0f9 refresh patches 
SVN-Revision: 34095
 2012-11-06 05:45:12 +00:00
Imre Kaloz
1a9dfd566e add default packages 
SVN-Revision: 34094
 2012-11-06 05:39:08 +00:00
Jonas Gorski
0722fd9c63 linux: generic: fix split_squashfs for 3.6 
_read expects the retlen to be initialized to zero, which the mtd_read
helper does. So fix it by using mtd_read instead of calling _read directly.

SVN-Revision: 34093
 2012-11-06 00:48:21 +00:00
Jonas Gorski
5bc7d81a20 bcm63xx: fix SPW303V images 
SPW303V also needs its CRC fixed up since increasing the image size to
4MB to prevent the dual image mode of CFE.

SVN-Revision: 34091
 2012-11-05 22:50:29 +00:00
Gabor Juhos
e92da5e7ae ar71xx: nuke ath79_set_usb_power_gpio helper 
It is no longer used.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34088
 2012-11-05 13:23:28 +00:00
Gabor Juhos
f2528b1792 ar71xx: use gpio_request_one instead of ath79_set_usb_power_gpio 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34087
 2012-11-05 13:23:27 +00:00
Gabor Juhos
e8669729bc kernel: update linux 3.6 to 3.6.6 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34086
 2012-11-05 13:22:09 +00:00
Imre Kaloz
d822ecfdf8 use the mainline machname for the compex boards 
SVN-Revision: 34083
 2012-11-05 11:38:23 +00:00
Gabor Juhos
a0dd47bbed ramips: enable USB power on the DIR-645 
Closes #12422.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34082
 2012-11-05 11:04:45 +00:00
Gabor Juhos
5e43b934fd linux/3.3: backport an upstream GPIO patch 
The backported patch introduces new flags to
automatically export GPIOs when using the
convenience unctions gpio_request_one() or
gpio_request_array().

This will be used by ar71xx/ramips platforms.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34081
 2012-11-05 11:04:43 +00:00
Gabor Juhos
829aaedcbf ramips: add restorefactory to default package set for ALL0239-3G and ALL0256N 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 34078
 2012-11-05 06:58:53 +00:00
Gabor Juhos
ed35253f4c ar71xx: don't use the unknown LED on the ZCN-1523-5 board 
According to #12421, GPIO 1 controls the power
output on the unused lines of the LAN2 port.
Remove the LED definition in order to prevent
possible permanent hardware damage.

If someone needs that, the power-out feature can
be controlled via the GPIO sysfs interface.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34076
 2012-11-04 22:08:54 +00:00
Gabor Juhos
1b744e1ca5 ar71xx: include mtd layout in the command line for ZCN-1523H-* boards 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34074
 2012-11-04 21:12:20 +00:00
Gabor Juhos
b78a736dc2 ar71xx: add missing Makefile entry for the ZCN-1523H-{2,5} boards 
Also add the missing ATH79_MACH_ZCN_1523H_5 symbol.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34072
 2012-11-04 20:15:18 +00:00
Felix Fietkau
6040b1d29a linux-3.6: fix portability of some includes files in tools/ used on the host 
SVN-Revision: 34068
 2012-11-04 17:01:15 +00:00