Commit graph

28579 commits

Author SHA1 Message Date
John Crispin
d04cab8dfc ramips: Add support for Omnima MiniPlug
This patch adds support for the Omnima MiniPlug RT5350 based board, 8MB SPI flash

Signed-off-by: Ivan Ignjatic<ivan@omnima.co.uk>

SVN-Revision: 42200
2014-08-18 16:06:48 +00:00
John Crispin
db6a292d4c base-files: wan6 should reference wan intead of referencing itself.
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42199
2014-08-18 13:16:35 +00:00
John Crispin
b7b8da135a valgrind: set --enable-only64bit option for x86_64
There does not seem to be a good reason to build both
when building for x86_64.

SVN-Revision: 42198
2014-08-18 13:10:19 +00:00
John Crispin
b5be328624 valgrind: explicitly disable mpicc compiler
If there's an mpicc compile on the machine, the configure
script will take it, causing a bit of headache.

SVN-Revision: 42197
2014-08-18 13:10:16 +00:00
John Crispin
7ba7ddf88e gmp: add host compile
Currently, any package that uses host compile and depends on
libgmp.so will fail. This is because gmp is not compile for
host machine. So, staging_dir/host has only static lib for gmp

 $ ls staging_dir/host/lib/libgmp* -1
 staging_dir/host/lib/libgmp.a
 staging_dir/host/lib/libgmp.la
 staging_dir/host/lib/libgmpxx.a
 staging_dir/host/lib/libgmpxx.la

Addind host compile in gmp, the dependent package can use:

 PKG_BUILD_DEPENDS:=gmp/host

That will compile gmp to staging_dir/host with *.so files

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>

SVN-Revision: 42196
2014-08-18 13:10:11 +00:00
John Crispin
406d53c697 busybox: Fix pam_start link errors when PAM support is enabled
Patch to BusyBox Makefile to fix linker errors when PAM support is enabled by
CONFIG_BUSYBOX_CONFIG_PAM=y. Typical errors include:
login.c:(.text.login_main+0x122): undefined reference to `pam_start'

Signed-off-by: Stephen Parry <sgparry@mainscreen.com>

SVN-Revision: 42195
2014-08-18 13:10:08 +00:00
John Crispin
be6bbc7975 ramips: fix switch config for Edimax 3G-6200n
Switch in Edimax 3G-6200n also require full switch reset, not only vlan definitions. Tested on Edimax 3G-6200n.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 42194
2014-08-18 13:10:04 +00:00
John Crispin
e5e1c03354 ar71xx: TL-WR1043N/ND v2: Fix MAC address of WMAC
This sets the MAC address of the WLAN interface to the "official" primary MAC
address (the one on the label under the devices, and the one used with the stock
firmware). The MAC address used so far (primary-1) isn't even used at all with
the stock firmware, which sets (primary) on LAN and WLAN and (primary+1) on the
WAN interface (like OpenWrt does with this patch).

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 42193
2014-08-18 13:10:00 +00:00
John Crispin
60bf96e3a0 ralink: clean up HAME profiles, remove unnecessary packages.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 42192
2014-08-18 13:09:46 +00:00
John Crispin
a62e8bd145 ramips: add mpr-a1 to default profile
Add hame mpr-a1 to default ramips profile.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 42191
2014-08-18 13:09:43 +00:00
John Crispin
bb9a23aca2 ramips: Hame: change LED name mpr-x -> hame
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 42190
2014-08-18 13:09:39 +00:00
John Crispin
5d9b1e7ec1 ar71xx: build factory image for EnGenius ESR900 and ESR1750
Signed-off-by: Forest Crossman <cyrozap@gmail.com>

SVN-Revision: 42189
2014-08-18 13:09:34 +00:00
John Crispin
12b73579e4 lantiq: update to 3.14
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42188
2014-08-18 13:09:30 +00:00
John Crispin
860e01d7c4 octeon: update to 3.14
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42187
2014-08-18 13:09:24 +00:00
John Crispin
0fc4383d69 ramips: make use of the new board detection layer
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42186
2014-08-18 13:09:20 +00:00
John Crispin
562d9f9582 base-files: add a hardware detection layer
this allows targets to use the new uci-default helper which will generate
a file called /etc/board.json. a tool called /bin/config_generate can then
be used to generate the default uci settings.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42185
2014-08-18 13:09:17 +00:00
John Crispin
2c67682192 ar71xx: Fix 2.4G WiFi LED of the OpenMesh MR600 board
The OpenMesh MR600(v1) can only enable the 2.4G WiFi PHY LED through the
mini-PCIe device. Not configuring the LED pin inside the platform data
makes it impossible to configure it through any standard OpenWrt tool.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 42184
2014-08-18 13:09:14 +00:00
John Crispin
b796ff6ef3 lantiq: generate unique ARV7519RW22 firmware
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 42183
2014-08-18 13:09:11 +00:00
John Crispin
c2668207de lantiq: add support for xrx200 firmware depending on soc type
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 42182
2014-08-18 13:09:08 +00:00
John Crispin
db2e450ab5 lantiq: export soc type
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 42181
2014-08-18 13:08:59 +00:00
John Crispin
5f71dbb005 lantiq: improve ARV7519RW22 support
- use full board name
- rename uboot-env partition
- add dsl_fw partition
- remove unneeded pinmux groups
- move gigabit ethernet to LAN
- load mac address from mtd

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 42180
2014-08-18 13:08:56 +00:00
John Crispin
3a9752bbd2 ramips: add a workaround to fix failsafe on RT5350
Due to TCP connections not working when VLAN is disabled, this is
needed to get failsafe functional.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 42179
2014-08-18 13:08:52 +00:00
John Crispin
f80312613d ramips: enable additional GPIOs on HAME MPR-A1
According to the pcb tracing results[1] by anton.rad[2] MPR-A1s expose
6 unused GPIOs, only one of them working as configured in the current
DTS. This patch enables GPIO22-26.

Tested on hardware.

[1] http://i.imgur.com/kHVW2Ox.jpg
[2] https://forum.openwrt.org/viewtopic.php?pid=222698#p222698

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 42178
2014-08-18 13:08:48 +00:00
John Crispin
340f87a20f ar71xx: changed the EnGenius ESR900 mtdparts to match that of the ESR1750 since they have the same flash layout
Signed-off-by: Forest Crossman <cyrozap@gmail.com>

SVN-Revision: 42177
2014-08-18 13:08:45 +00:00
John Crispin
bf1e92f526 ralink: add back the gpio_export_named() patch for 3.14
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42176
2014-08-18 13:08:33 +00:00
Florian Fainelli
4147bca9ac adm8668: revert changeset 34554
The conversion was not 100% correct and leads to u-boot failing to
verify the CRC, revert that change for now.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 42170
2014-08-16 18:09:31 +00:00
Florian Fainelli
21fde478d9 ar7: remove 972-cpmac_fixup patch
This patch is causing more harm than good on most AR7 routers out there,
better have no manageable switch rather than no ethernet connection, at
least for now.

Fixes #16523, #5927

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 42168
2014-08-16 17:32:46 +00:00
Hauke Mehrtens
ba0b904d0b brcm47xx: image: update list of Netgear WNR* firmwares
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42165
2014-08-14 21:22:17 +00:00
Hauke Mehrtens
254b4df66f brcm47xx: fix brcm47xx.legacy build
we should check for ssb here.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42164
2014-08-14 21:21:27 +00:00
Jonas Gorski
006cdbfdbc dropbear: fix keepalive with putty
Don't send SSH_MSG_UNIMPLEMENTED for keepalive responses, which broke
at least putty.

Fixes #17522 / #17523.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42162
2014-08-13 20:49:56 +00:00
Steven Barth
92ef017054 netifd: assign ipv6-prefixes with length <64 with /64 on-link routes
SVN-Revision: 42161
2014-08-13 14:57:11 +00:00
Steven Barth
a8a07e5156 odhcpd: improve DHCPv6-PD detection
SVN-Revision: 42160
2014-08-13 14:57:07 +00:00
Steven Barth
af964cafc3 ppp: enable IPv6CP by default
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 42158
2014-08-13 10:18:20 +00:00
Steven Barth
eba984b94b odhcpd: multiple DHCPv4 improvements (thx Christian Mehlis)
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 42153
2014-08-12 13:30:04 +00:00
Jo-Philipp Wich
eb02b887ff package: fix segfault of iwinfo.scanlist("radio0").
This is a bug revealed in r41830.

First, the static variable `char nif[IFNAMSIZ]` of nl80211_phy2ifname()
would be zeroed out if the argument is "wlan0" or the like.  This will
happen in the following call stack.

 nl80211_get_scanlist("radio0", buf, len);
   nl80211_phy2ifname("radio0")			// return static var nif with content "wlan0"
   nl80211_get_scanlist(nif, buf, len);		// tail call
     nl80211_get_mode(nif);
        nl80211_phy2ifname(nif);		// zero out nif

Later we try nl80211_ifadd("") which was supposed to create interface
"tmp.", but that won't happen because nl80211_msg() will put an invalid
ifidx 0 to the nlmsg.

Then iwinfo_ifup() and iwinfo_ifdown() would fail and happily
nl80211_get_scanlist() returned 0 and left *len undefined.

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 42151
2014-08-12 11:14:11 +00:00
Luka Perkov
24696a06ad imx6: update kernel config
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42149
2014-08-11 20:35:15 +00:00
Luka Perkov
fa8e8d262e imx6: kernel: add GW5520 support
The GW5520 is a small form-factor single-board computer with the following
features:
 * 70x100mm form-factor
 * IMX6DL 800MHz SoC (IMX6Q optional)
 * 512MB 32bit DDR3 SDRAM (up to 2GB optional)
 * 256MB NAND FLASH (up to 2GB optional)
 * Gateworks System Controller
 * 2x front-panel Intel i210 GbE adapters with passive PoE support
 * 2x MiniPCIe sockets with USB support
 * 2x front-panel USB
 * 1x rear-panel full-size HDMI connector
 * 1x front-panel bi-color user LED
 * 1x front-panel user pushbutton
 * 1x rear-panel barrel jack for power
 * 1x Application connector with:
  * 2x TTL level UARTs
  * 10x TTL level Digital IO

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 42148
2014-08-11 20:35:13 +00:00
Luka Perkov
dcacd65281 imx6: kernel: add GW16083 Ethernet Expansion Mezzanine support
The GW16083 Ethernet Expansion Mezzanine adds the following to supported
Gateworks baseboards:
 * 7-port Ethernet Switch
  * 4x RJ45 ports (ENET1-4) supporing 802.11af/at PoE (with optional PoE module)
  * 2x RJ45 ports or SFP module (ENET5-6) (auto-selected)

This series adds support for a phy driver that adds support for ENET5/ENET6
PHY adding initialization for those PHY's and a polling mechanism that detects
SFP insertion and configuration.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 42147
2014-08-11 20:35:10 +00:00
Luka Perkov
9d826428b7 imx6: kernel: add GW16082 miniPCI Expansion Mezzanine support
The GW16082 miniPCI Expansion Mezzanine has the INTA/B/C/D IRQ's reversed
from the PCI standard. This will soon be resolved in the bootloader via
devicetree, but in the meantime this will work around the issue.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 42146
2014-08-11 20:35:06 +00:00
Luka Perkov
e47c4d7014 imx6: kernel: fix occasional link failure
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 42145
2014-08-11 20:35:04 +00:00
Luka Perkov
fe5d39d66c imx6: kernel: backport an upstream pci hang fix
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 42144
2014-08-11 20:35:02 +00:00
Hauke Mehrtens
3c3b3dd41d bcm53xx: add b43 wifi support
Now it is possible to use b43 wifi.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42143
2014-08-11 20:25:26 +00:00
Hauke Mehrtens
1d14e7ef1b bcm53xx: remove BCM4360 from PCI ids
bcma does not support this card and b43 hangs when probing this card.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42142
2014-08-11 20:24:45 +00:00
Hauke Mehrtens
33264155cb mac80211: fix warning with kernel 3.14
This fixes a redefinition of net_get_random_once() warning.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42141
2014-08-11 20:23:20 +00:00
Jo-Philipp Wich
f63509ac89 base-files: /lib/functions/network.sh: fix network_get_ipaddr6
When looking for the first ipaddr also consider the current prefix just
like network_get_ipaddrs6 does. If ipv6-address was empty the function
did not return the first ipaddr even if the list was non-empty.

fixes commit 83e9122f88a002871d5cdf421cf6aa6052b7e006

Signed-off-by: Henning Schild <henning@hennsch.de>

SVN-Revision: 42139
2014-08-11 18:15:18 +00:00
Jo-Philipp Wich
aa9e69908e firewall: fix potential NULL pointer access
Properly skip struct ifaddr entries with NULL ifa_addr, thanks Kostas Papadopoulos for reporting.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 42138
2014-08-11 17:45:18 +00:00
Steven Barth
ff6363dc19 dropbear: update to 2014.65
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 42131
2014-08-11 13:02:43 +00:00
Imre Kaloz
ecba34a3ee add support for the NC-LINK SMART-300
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 42130
2014-08-11 11:44:51 +00:00
Jonas Gorski
43029544e2 brcm63xx: remove now obsolete board fixup code
Now that we migrated all users to dtb based detection, we can drop the
board fixup code.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42129
2014-08-11 11:37:26 +00:00
Jonas Gorski
74ec41ef59 brcm63xx: use dtb board detection for neufbox 4
This splits up neufbox 4 for now into two images, one for each OEM.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42128
2014-08-11 11:37:21 +00:00