Commit graph

42547 commits

Author SHA1 Message Date
Christian Lamparter
b70d3557e0 apm821xx: clean up gpio-hogs
convert the usb and both sata port power related gpio-hogs to
what they really are: fixed-regulators.

The ethernet phy-reset gpio-hog is replaced by a proper
upstream (4.15+) reset-gpios property in the mdio-node.
So this will work eventually.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-07-30 08:12:32 +02:00
Christian Lamparter
cff6548948 apm821xx: split MBL's rootfs.img.gz into a sysupgrade and factory image
@vahid-dan reported a issue with extracting the rpi images with
Gnome's Archive Manager:
"Ubuntu Archive Manager cannot extract the file and it just
throws a general error message: "An error occurred while
extracting files".
<https://forum.lede-project.org/t/corrupted-pre-built-v18-06-0-rc2-image-for-rpi>

The MBL's rootfs.img.gz image is generated in much the same way.
Hence this patch preemptively splits the rootfs.img.gz image into
a sysupgrade and a factory image.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-07-30 08:12:13 +02:00
Christian Lamparter
aed4799d6d apm821xx: build squashfs-rootfs images for the MBL
This patch adds support for squashfs as the root filesystem.

advantages:
 - migrate from a existing -ext4 installation and back
   with the sysupgrade utility
 - existing partition layout will not be lost during switch
 - slightly smaller image size as compared to the -ext4 image.

disadvantages:
 - needs f2fs + tools. This is because fstools rootdisk.c decides based
   on the partition size (currently root partitions > 100 MiB) f2fs is
   used as the rootfs_data filesystem.
 - rootfs_data is placed into the rootfs partition after the squashfs.
   This makes it difficult for tools that expect a /dev/sda${X} device.
   It also makes it difficult for data recovery tools as they might not
   expect to find a embedded partition or will be slightly confused.
   ... or will not support f2fs.

For people with existing build configurations: make sure to include mkf2fs
and f2fsck packages into the image. Otherwise the new -squashfs image will
only boot from the ram-overlay.

Note:
All overlay data (configurations/all installed packages/...) will be
placed in inside the rootfs partition (i.e. /dev/sda2) just after the
squashfs image.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-07-30 08:11:56 +02:00
Christian Lamparter
7516a96011 brcm2708: split sdcard.img.gz into a sysupgrade and factory image
@vahid-dan reported a issue with extracting the rpi images with
Gnome's Archive Manager:
"Ubuntu Archive Manager cannot extract the file and it just
throws a general error message: "An error occurred while
extracting files".
<https://forum.lede-project.org/t/corrupted-pre-built-v18-06-0-rc2-image-for-rpi>

@blogic told me to split the single sdcard.img.gz for the RPi
into a sysupgrade and a factory image for all brcm2708 targets.
The factory images will have no metadata attached, this way
these utilities that can't deal with the attached metadata will
not fail for no reason.

Cc: John Crispin <john@phrozen.org>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-07-30 08:11:36 +02:00
Christian Lamparter
df495305f3 ipq-wifi: add a note / reminder about upstreaming new board files
|Please send a mail with your device-specific board files upstream.
|You can find instructions and examples on the linux-wireless wiki:
|<https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles>

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-07-30 08:11:21 +02:00
Jonas Gorski
7880a6f7fe brcm63xx: drop linux,part-probe usage where possible
It was present as 4.4 compatibility, but since we now use 4.9 or later
with the new upstream solution, we don't need it anymore.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2018-07-29 15:38:33 +02:00
Jonas Gorski
abb28bec25 brcm63xx: drop own implementation of DT partitions in favour of upstream
The binding works the same, so we can just drop the revert and the patch.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2018-07-29 15:38:33 +02:00
Rosen Penev
fc89831ae8 thc-ipv6: Update URLs
Development has moved to GitHub. Found using UScan.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-07-29 12:11:31 +02:00
Rosen Penev
31f87ebcb2 libjson-c: Update package URL
Found through UScan.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-07-29 12:05:53 +02:00
Rafał Miłecki
0417b08b06 bcm53xx: revert SPI controller commit breaking flash reads
That upstream commit caused instability in flash reads. It was reported
but there isn't any proper fix as for now.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-07-29 11:02:57 +02:00
Daniel Engberg
b078229412 tools/cmake: Update to 3.12.0
Update cmake to 3.12.0
Remove 140-curl-fix-libressl.patch as fix is in upstream

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2018-07-29 10:08:20 +02:00
Rafał Miłecki
a07730472c bcm53xx: backport BCM5301X/BCM53573 dts commits from 4.19+
This includes Linksys EA9500 support, BCM53573 timer fix and
upstream-ready partitions patch that replaces two downstream hacks.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-07-28 21:48:10 +02:00
Rafał Miłecki
8a175ea219 bcm53xx: switch USB 3.0 PHY DT description to use MDIO bus
USB 3.0 PHY is attached to the MDIO bus and should be supported
(accessed) as a MDIO device. This wasn't known initially which resulted
in writing driver that was working with MDIO bus (using some magic
values) without knowing it.

This commit updates DT to properly describe MDIO & USB 3.0 PHY and
enables required kernel drivers.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-07-28 21:46:08 +02:00
Rafał Miłecki
5c8b8a3fd4 bcm53xx: backport DT fix for I2C controller interrupt
Specified interrupt type was incorrect.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-07-28 21:36:33 +02:00
Dmitry Tunin
7a6b2badfa igmpproxy: add a silent logging option
[0-3](none, minimal[default], more, maximum)

It is not 100% backward compatible, because now 0 disables logging

Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
2018-07-28 15:20:39 +01:00
Kevin Darbyshire-Bryant
1e93ef8498 dnsmasq: bump to dnsmasq v2.80test3
Refresh patches

Upstream commits since last bump:

3b6eb19 Log DNSSEC trust anchors at startup.
f3e5787 Trivial comment change.
c851c69 Log failure to confirm an address in DHCPv6.
a3bd7e7 Fix missing fatal errors when parsing some command-line/config options.
ab5ceaf Document the --help option in the french manual
1f2f69d Fix recurrent minor spelling mistake in french manual
f361b39 Fix some mistakes in french translation of the manual
eb1fe15 When replacing cache entries, preserve CNAMES which target them.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-07-28 11:16:41 +01:00
Rafał Miłecki
2a598bbaa3 kernel: backport mtd support for subpartitions in DT
This is a new & warm feature that allows nesting partiitons in DT and
mixing their types (e.g. static vs. dynamic). It's very useful for
boards that have most partitions static but some of them require extra
parsing (e.g. a "firmware" partition).

It's required to successfully backport support for new devices using
that new syntax in their DT files.

Since brcm63xx has a custom alternative patch the upstream one is being
reverted for it. The plan is to make brcm63xx use the upstream
implementation.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-07-27 22:16:24 +02:00
Rafał Miłecki
4c1aa64b4d brcm47xx: revert upstream commit breaking BCM4718A1
This fixes kernel hang when booting on BCM4718A1 (& probably BCM4717A1).

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-07-27 15:58:51 +02:00
Rafał Miłecki
6bcafea2c0 kernel: backport mtd patches with Broadcom of_match_table-s
Two tiny & trivial patches with no regression risk. One simplifies
bcm53xx downstream patch.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-07-27 15:55:01 +02:00
Daniel Golle
af4b23dde2 util-linux: package blockdev executable
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-07-27 12:51:03 +02:00
Masashi Honma
d05967baec wwan: Fix teardown for sierra_net driver
The sierra_net driver is using proto_directip_setup for setup. So use
proto_directip_teardown for teardown.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2018-07-27 11:17:20 +02:00
Syrone Wong
7dfd72dfff ead: use new protocol setting API since libpcap 1.9.0
Dropped the protocol API specific symbol: HAS_PROTO_EXTENSION and
switch to the official API

Signed-off-by: Syrone Wong <wong.syrone@gmail.com>
2018-07-27 11:17:20 +02:00
Syrone Wong
4d57c696b1 libpcap: update to 1.9.0
001-Fix-compiler_state_t.ai-usage-when-INET6-is-not-defi.patch dropped due to upstream
002-Add-missing-compiler_state_t-parameter.patch dropped due to upstream

202-protocol_api.patch dropped due to implemented upstream by another way
upstream commit: 55c690f6f8
and renamed via: 697b1f7e9b

ead is the only user who use the protocol api, we have to use the new api since libpcap 1.9.0

Signed-off-by: Syrone Wong <wong.syrone@gmail.com>
2018-07-27 11:17:20 +02:00
Rafał Miłecki
c0608c6a27 mac80211: brcmfmac: backport 4.19 patches preparing monitor mode support
Monitor mode isn't supported yet with brcmfmac, it's just an early work.
This also prepares brcmfmac to work stable with new firmwares which use
updated struct for passing STA info.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-07-27 08:04:14 +02:00
Rafał Miłecki
b26214adb5 mac80211: backport brcmfmac fixes & debugging helpers from 4.18
The most important is probably regression fix in handling platform
NVRAM. That bug stopped hardware from being properly calibrated breaking
e.g. 5 GHz for Netgear R8000.

Other than that it triggers memory dumps when experiencing firmware
problems which is important for debugging purposes.

Fixes: 7e8eb7f309 ("mac80211: backport brcmfmac firmware & clm_blob loading rework")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-07-26 23:21:46 +02:00
Jo-Philipp Wich
7316515891 ubus: update to latest git HEAD
40e0931 libubus: pass an empty UBUS_ATTR_DATA block if msg is NULL on invoke

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-07-26 16:48:07 +02:00
Jo-Philipp Wich
88c88823d5 odhcpd: update to latest git HEAD
44cce31 ubus: avoid dumping interface state with NULL message

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-07-26 14:53:05 +02:00
Jo-Philipp Wich
3ee2c76ae0 firewall: update to latest git HEAD
aa8846b ubus: avoid dumping interface state with NULL message

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-07-26 08:44:53 +02:00
John Crispin
a5c3bbaf56 ubus: update to latest git HEAD
884be45 libubus: check for non-NULL data before running callbacks

Signed-off-by: John Crispin <john@phrozen.org>
2018-07-25 12:15:45 +02:00
John Crispin
5dc32620c4 libubox: update to latest git HEAD
c83a84a fix segfault when passed blobmsg attr is NULL

Signed-off-by: John Crispin <john@phrozen.org>
2018-07-25 12:13:19 +02:00
John Crispin
ffc40d2eae ipq40xx: move essedma patches into same range
Signed-off-by: John Crispin <john@phrozen.org>
2018-07-25 12:13:19 +02:00
John Crispin
e725d3080c ipq40xx: sync kernel config
Signed-off-by: John Crispin <john@phrozen.org>
2018-07-25 12:13:18 +02:00
John Crispin
95672e0433 ipq40xx: use patches that were sent upstream
Signed-off-by: John Crispin <john@phrozen.org>
2018-07-25 12:13:18 +02:00
John Crispin
e8c58e7ddd ipq40xx: move dts file patches to end of series
Signed-off-by: John Crispin <john@phrozen.org>
2018-07-25 12:00:21 +02:00
John Crispin
c913288844 ipq40xx: cleanup USB support
remove the 2 USB PHY drivers and add a generic PHY driver instead

Signed-off-by: John Crispin <john@phrozen.org>
2018-07-25 12:00:21 +02:00
John Crispin
3d456a50f4 ipq40xx: drop no-op cpu_idle symbol patch
Signed-off-by: John Crispin <john@phrozen.org>
2018-07-25 12:00:21 +02:00
David Bauer
5409dcffbd ath79: fix OCEDO Raccoon
The OCEDO Raccoon only has one ethernet port, but currently uci sections
for WAN and LAN are created.

Additionally, newer versions of the devices U-Boot (units with SteelWRT)
set the kernel-cmdline and therefore overwrite the partition-layout.
We fix this by overwriting the cmdline supplied by the bootloader.

Signed-off-by: David Bauer <mail@david-bauer.net>
2018-07-25 08:59:33 +02:00
Mathias Kresin
4cbf5601f9 ramips: remove stale get_status_led call
The get_status_led() function was removed due to the convertion to dts
alias based status led.

Since we don't need the boardname any longer, the functions.sh include
isn't required any more.

Fixes: c9c4b2116c ("ramips: Use dts alias based status led")

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-07-25 08:57:17 +02:00
Mathias Kresin
3716b5e4e6 kernel: don't auto attach ubi on read error
With a10a204aab ("kernel: make ubi auto-attach check for a tar file
magic") the check for the magic was added without considering a failing
mtd_read(). If the read fails, no check is done and the mount code is
called straight away.

Failing with an error message for such cases seems to me the cleaner way,
as it would allow to spot hidden/workaround issues.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-07-24 22:24:21 +02:00
Mathias Kresin
0ac91d82ed kernel: handle bad blocks in ubi auto attach code
The first block(s) of the ubi mtd device might be bad. We need to take
care on our own to skip the bad block(s) and read the next one(s).

Don't treat recoverable read errors as fatal and check for the UBI magic
if the data of a block could be recovered using ECC or similar.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-07-24 22:24:21 +02:00
Mathias Kresin
fdf6760cda kernel: improve ubi auto attach code readability
Move the put_mtd_device() called on multiple error conditions to a goto
label to use it later for more error conditions.

The early return on failed open of the mtd device and mismatching mtd
type allows to get rid of one level of indentation. By jumping to the
cleanup code, a refcount bug is fixed for the wrong flash type condition.

While at it, make clear that we only check for the UBI magic if the read
from flash was successful.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-07-24 22:24:21 +02:00
Ted Hess
354de22bad elfutils: Copy missing libraries to staging and packages
Newer shared libraries seem to have the package version as part of their name.
E.g.: libelf-0.173.so

Signed-off-by: Ted Hess <thess@kitschensync.net>
2018-07-24 14:32:27 -04:00
Daniel Engberg
f486f81c64 utils/curl: Disable libpsl
Disabled libpsl to fix build issue reported by buildbots

Package libcurl is missing dependencies for the following libraries:
libpsl.so.5


Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2018-07-24 15:35:51 +02:00
Jo-Philipp Wich
991c7a4f69 build: do not override CCACHE_DIR when ccache is disabled
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-07-24 15:23:05 +02:00
Jo-Philipp Wich
a6f4c7bce8 build: prereq-build.mk: fix gcc/g++ SetupHostCommand invocation
A missing comma caused the first command option to be considered part of
the error message.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-07-24 13:37:24 +02:00
John Crispin
1e48e56c50 ipq40xx: drop bus driver, its a no-op and only does lots of alloc/free
Signed-off-by: John Crispin <john@phrozen.org>
2018-07-24 10:50:13 +02:00
Aleksandr V. Piskunov
20c4819c7b wireguard-tools: add wireguard_watchdog script
This watchdog script tries to re-resolve hostnames for inactive WireGuard peers.
Use it for peers with a frequently changing dynamic IP.
persistent_keepalive must be set, recommended value is 25 seconds.
Run this script from cron every minute:
echo '* * * * * /usr/bin/wireguard_watchdog' >> /etc/crontabs/root

Signed-off-by: Aleksandr V. Piskunov <aleksandr.v.piskunov@gmail.com>
[bump the package release]
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-07-22 21:52:20 +01:00
Ansuel Smith
2dcd955aea mac80211: backport and update patches for ath10k
This commit refreshes and updates the VHT160 ath10k support fix patches
and adds a number of backports from ath-next:

 * 8ed05ed06fca ath10k: handle tdls peer events
 * 229329ff345f ath10k: wmi: modify svc bitmap parsing for wcn3990
 * 14d65775687c ath10k: advertise TDLS wider bandwidth support for 5GHz
 * bc64d05220f3 ath10k: debugfs support to get final TPC stats for 10.4 variants
 * 8b2d93dd2261 ath10k: Fix kernel panic while using worker (ath10k_sta_rc_update_wk)
 * 4b190675ad06 ath10k: fix kernel panic while reading tpc_stats
 * be8cce96f14d ath10k: add support to configure channel dwell time
 * f40105e67478 ath: add support to get the detected radar specifications
 * 6f6eb1bcbeff ath10k: DFS Host Confirmation
 * 260e629bbf44 ath10k: fix memory leak of tpc_stats
 * 38441fb6fcbb ath10k: support use of channel 173
 * 2e9bcd0d7324 ath10k: fix spectral scan for QCA9984 and QCA9888 chipsets

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
[move backported patches in the 3xx number space, bring in upstream order,
 replace incomplete patch files with git format-patch ones, rewrite commit
 message, fix subject]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-07-22 22:25:33 +02:00
Jason A. Donenfeld
57b808ec88 wireguard: bump to 0.0.20180718
80b41cd version: bump snapshot
fe5f0f6 recieve: disable NAPI busy polling
e863f40 device: destroy workqueue before freeing queue
81a2e7e wg-quick: allow link local default gateway
95951af receive: use gro call instead of plain call
d9501f1 receive: account for zero or negative budget
e80799b tools: only error on wg show if all interfaces failk

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
[Added commit log to commit description]
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-07-22 21:01:34 +01:00
Felix Fietkau
f0ac9afe69 hostapd: remove unused struct hostapd_ubus_iface
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-07-22 17:17:20 +02:00