KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
22953 commits 1 branch 0 tags 154 MiB
Commit graph

55 commits

Author SHA1 Message Date
Hauke Mehrtens
d8f1fa1e38 switch: ROBO Switch Gigabit MII Support 
I wrote this patch some time ago because I had a need for one of the
Gigabit ports (Linksys E3000) to be forced to 100FD.  This is based
on the robocfg sources included w/ the RT-N16 sources from ASUS.
Since work is progressing on a BGMAC driver that could be included in
OpenWRT, this may be useful to someone else.

In testing, forcing the speed to 10/100 or 1000 worked fine; however,
when trying to force full-duplex mode, the result was always
half-duplex.  I was not able to isolate the source of the problem
(this patch, driver or H/W limitation).  The only way I could get it
to work was to set the port to Auto, but then only advertise 100FD
(not included in this patch).

I have a modified version of the robocfg package as well, I'd have to
clean it up a little first (remove the full-duplex hack) before
submitting it if there is interest.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 34992
 2013-01-03 01:58:01 +00:00
Hauke Mehrtens
63ec34612c switch: improve error messages 
This is in part based on a patch send by Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 34991
 2013-01-03 01:57:19 +00:00
Hauke Mehrtens
25afeba608 brcm47xx: add a new version of the nvram rewrite patch 
This is the version like it was send for mainline inclusion.

SVN-Revision: 34988
 2013-01-03 01:53:30 +00:00
Hauke Mehrtens
da94d4ac29 switch: warn if ndo_do_ioctl is not implemented in the Ethernet driver 
SVN-Revision: 33506
 2012-09-22 12:29:23 +00:00
Hauke Mehrtens
bf0974e8da switch: improve error message 
SVN-Revision: 33464
 2012-09-19 10:57:38 +00:00
Hauke Mehrtens
40f139b53b switch: clean up robo switch driver 
* remove use_et, all supported drivers are using mii ioctls
 * remove robo.phy_addr, phy_addr was always set to ROBO_PHY_ADDR.
 * remove support for old kernel versions
 * do_ioctl is allways called with buff == NULL
 * use if_mii

SVN-Revision: 33002
 2012-08-05 13:10:43 +00:00
Hauke Mehrtens
0758996824 brcm47xx: use libgpio instaed of implementing the gpio interface ourself. 
SVN-Revision: 32992
 2012-08-04 19:46:25 +00:00
Jo-Philipp Wich
654f9c879f switch: the hardware must be up while configuring Since the removal of the interface coldplug hack the timing changed in such a way that eth0 is not up during switch setup, leading to an inaccesible device. Bring up the switch interface before configuring it to mitigate the problem. 
SVN-Revision: 30937
 2012-03-13 21:15:41 +00:00
Hauke Mehrtens
b9da4dcb6b switch: fix some memory leaks in switch_parse_vlan() 
SVN-Revision: 29936
 2012-01-28 13:52:37 +00:00
Hauke Mehrtens
b220442c75 switch: update for brcm47xx target 
* remove suport for 2.4 kernel
* add support for bcma bus

SVN-Revision: 27904
 2011-08-04 20:07:58 +00:00
Florian Fainelli
640927dde3 switch: fix switch-robo device reference counting 
Fix incorrect device reference counting by switch-robo.

Signed-off-by: George Kashperko <george@znau.edu.ua>

SVN-Revision: 25619
 2011-02-20 17:24:15 +00:00
Florian Fainelli
e31542241c remove whitespaces in kmod-switch sources 
SVN-Revision: 22320
 2010-07-20 22:25:04 +00:00
Claudio Mignanti
2d86ea7bf3 massive: replace occurences of .$(LINUX_KMOD_SUFFIX) with .ko after r21950 
SVN-Revision: 22145
 2010-07-12 14:06:13 +00:00
Felix Fietkau
543d870e82 remove linux 2.4 support from several packages 
SVN-Revision: 21954
 2010-06-26 20:43:41 +00:00
Jo-Philipp Wich
501e154d03 switch: explicitely clear port mappings in unsused vlans (#7082) 
SVN-Revision: 20717
 2010-04-05 13:51:26 +00:00
Nicolas Thill
2d100861a4 switch: suppress boot error message on 2.4 
SVN-Revision: 19922
 2010-03-01 01:12:57 +00:00
Jo-Philipp Wich
96e4312e7e switch: eliminate the asterisk from the switch port configuration and set it automatically on the first vlan, this aligns the broadcom vlan config with the swconfig format 
SVN-Revision: 19909
 2010-02-28 16:40:06 +00:00
Florian Fainelli
f4edda27af switch: do not include linux/autoconf.h (#6513) 
SVN-Revision: 19903
 2010-02-28 12:57:57 +00:00
Jo-Philipp Wich
194f32bc26 change switch config to swconfig style format to remain consistent accross platforms 
SVN-Revision: 18425
 2009-11-15 18:43:46 +00:00
Florian Fainelli
5a13cc0726 fix breakage on wl500gp after r18214, thanks sn9 (#6084) 
SVN-Revision: 18289
 2009-11-03 20:35:37 +00:00
John Crispin
2d57b56bce make etehrent work on wrt350n, thx sn9 
SVN-Revision: 18214
 2009-10-29 21:26:36 +00:00
Hauke Mehrtens
8673372e20 add patches for kernel 2.6.31 
This is completly untested. Only a compile tests with the default config was done!

SVN-Revision: 17734
 2009-09-26 11:48:48 +00:00
Florian Fainelli
369db35a29 fix oops in switch-robo on brcm63xx, thanks to Daniel Dickinson (#5053) 
SVN-Revision: 15611
 2009-05-05 06:32:45 +00:00
Florian Fainelli
9051239daf prevent kmod-switch from accessing nvram on brcm63xx (#5035) 
SVN-Revision: 15555
 2009-05-02 10:01:09 +00:00
Florian Fainelli
210254c279 fix nvram_get checking on non-WGT634U (#4975) 
SVN-Revision: 15319
 2009-04-21 09:25:51 +00:00
Florian Fainelli
6f80c9cc7c fix strange LED behavior with Netgear WGT634U (#3552) 
SVN-Revision: 15290
 2009-04-20 10:27:46 +00:00
Felix Fietkau
34939cad39 get rid of $Id$ - it has never helped us and it has broken too many patches ;) 
SVN-Revision: 15242
 2009-04-17 14:09:46 +00:00
Florian Fainelli
04909ca614 allow kmod-switch to be used on brcm63xx (#4599) 
SVN-Revision: 14825
 2009-03-09 21:57:11 +00:00
Felix Fietkau
529e87f6c5 switch: remove message about BFL_ENETADM not being set on systems with a roboswitch 
SVN-Revision: 13100
 2008-11-02 23:14:16 +00:00
Felix Fietkau
40990382e5 (4/6) bcm57xx: switch-core.c/switch-robo.c check for port already registered 
This patch prevents switch-robo.c from attempting robo_probe on a port
that is already registered.  robo_probe will adjust kernel reference counts
if it detects a switch on the port.  If this patch wasn't applied, the
wrt350n would hang on reboot, waiting for the network driver reference count
to reach zero indefinitely.

Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>

SVN-Revision: 11469
 2008-06-15 11:10:27 +00:00
Peter Denison
f027ecb2cf Stopgap compilation fixes for diag and switch under 2.6.25 
SVN-Revision: 11231
 2008-05-20 22:33:45 +00:00
Peter Denison
72d40dec08 Allow package/switch to compile against 2.6.25 
SVN-Revision: 11138
 2008-05-14 15:03:05 +00:00
Michael Büsch
6a2a1e251b Check the return values of kmalloc() 
SVN-Revision: 10599
 2008-03-13 15:22:46 +00:00
Felix Fietkau
d65241e13b fix switch-robo.c compile errors on linux 2.4 
SVN-Revision: 10539
 2008-03-01 15:34:17 +00:00
Michael Büsch
a9cddc69ec Fix the roboswitch code for the WRT350N 
SVN-Revision: 10531
 2008-02-27 22:35:41 +00:00
Michael Büsch
faa14263f5 ssb: Make the GPIO API reentrancy safe. 
SVN-Revision: 10496
 2008-02-19 15:22:17 +00:00
Felix Fietkau
d9e54d1e0b export switch-core.h to $(STAGING_DIR) 
SVN-Revision: 10138
 2008-01-06 19:28:26 +00:00
Felix Fietkau
e3ecefbd23 fix adm switch misdetection, which led to bogus button events that caused the system to shut down 
SVN-Revision: 9555
 2007-11-16 03:11:09 +00:00
Felix Fietkau
a9d683ca91 major target cleanup. it is now possible to have subtargets that can override many target settings, including arch - merge adm5120, adm5120eb. target profiles still need to be adapted for subtargets 
SVN-Revision: 8694
 2007-09-08 19:55:42 +00:00
Nicolas Thill
e3dc76af1b fix board name for nvram and switch packages on brcm-2.4 after [8653] 
SVN-Revision: 8664
 2007-09-07 12:54:24 +00:00
Nicolas Thill
34bb4638e7 move package description to a separate definition, remove it when DESCRIPTION=TITLE 
SVN-Revision: 8659
 2007-09-07 08:34:51 +00:00
Felix Fietkau
56231056ea strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles. 
SVN-Revision: 8653
 2007-09-06 16:27:37 +00:00
Nicolas Thill
be0de75a3e package Makefile cleanup: remove uneeded vars 
SVN-Revision: 8587
 2007-09-03 08:20:36 +00:00
Nicolas Thill
02cd6d278f use a default VERSION field for kmod packages 
SVN-Revision: 8575
 2007-09-02 16:39:27 +00:00
Felix Fietkau
80840457a5 fix kmod-switch compile on brcm-2.4 (#1461) 
SVN-Revision: 6565
 2007-03-14 13:42:21 +00:00
Felix Fietkau
dcfbd5f656 fix up remaining parts for the brcm47xx-2.6 port (tested on wgt634u), nuke the old brcm-2.6 port, close #1312, #1451 
SVN-Revision: 6564
 2007-03-14 03:37:40 +00:00
Felix Fietkau
bf622ab0ae add diag and switch support for brcm47xx-2.6 
SVN-Revision: 6562
 2007-03-14 01:19:24 +00:00
Felix Fietkau
c606df6563 cleanup, nuke obsolete 'Kernel drivers' category, convert remaining kmod packages to KernelPackage interface 
SVN-Revision: 6136
 2007-01-20 02:01:53 +00:00
Felix Fietkau
dd03b56357 fix memory leak in switch drivers (patch from #1132) 
SVN-Revision: 6011
 2007-01-07 14:59:43 +00:00
Florian Fainelli
abd458dae6 Fix the counters bug (#983) 
SVN-Revision: 5910
 2006-12-27 19:35:13 +00:00