KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
28965 commits 1 branch 0 tags 154 MiB
Commit graph

12725 commits

Author SHA1 Message Date
John Crispin
cc292d7de8 generic: fix yaffs compilation on 3.14 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 42909
 2014-10-14 11:32:48 +00:00
John Crispin
af58224462 rb532: add 3.14 support 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 42908
 2014-10-14 11:32:43 +00:00
John Crispin
0f790247e3 lantiq: allow pcie to be disabled by dts + vgv7519 fix pci irq + disable pcie by dts 
Signed-off-by: Eddi De Pieri <eddi@depieri.net>

SVN-Revision: 42907
 2014-10-14 11:04:25 +00:00
John Crispin
99c238ff15 ar71xx: Fix LED definitions for the DRAGINO2 board 
This patch fixes LED definitions for the DRAGINO2 board.

1. It renames the Router/USB led to System, as it is now marked "SYS" on the board.
2. It gives control of the LAN and WAN leds and some other GPIOs to Linux.
3. It fixes the active_low property for the LAN and WAN leds.
4. It sets up WLAN, LAN and WAN leds in the UCI defaults.
5. It allows usage of the System led by the diag.sh script, so it will be used to indicate boot and failsafe status.

Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>

SVN-Revision: 42897
 2014-10-14 10:33:07 +00:00
John Crispin
28d57f707d mpc85xx: use wpad-mini in WDR4900 profile instead of wpad 
This change makes the profile of WDR4900 more consistent with other router
specific profiles.

Signed-off-by: Philipp Borgers <borgers@mi.fu-berlin.de>

SVN-Revision: 42896
 2014-10-14 10:30:56 +00:00
Rafał Miłecki
5a03d0c931 bcm53xx: fix hangs in PCIe2 host driver 
Accessing CFG regs with no card present results in SoC hang.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42895
 2014-10-14 08:06:15 +00:00
Rafał Miłecki
540a6a45e4 bcm53xx: add temp bcma workaround that allows debugging 
This way we will get logs if case of hang/crash in bcma or related code.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42894
 2014-10-14 05:31:54 +00:00
John Crispin
4b45695c9a at91: fix at91-adc dependencies 
Error reported by buildbot:
Package kmod-at91-adc is missing dependencies for the following libraries:
input-core.ko

only compile tested

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 42893
 2014-10-13 19:45:31 +00:00
John Crispin
06a849575d ralink: Build 8M image for 7Links PX-4885 
7Links PX-4885 (clones) can also be purchased with 8MB flash.
Creating images for these routers, use dtsi for common part

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 42892
 2014-10-13 19:41:36 +00:00
Rafał Miłecki
746b80f166 brcm47xx: image: create initramfs TRX nodictionary images 
Signed-off-by: Stephen Parry <sgparry@mainscreen.com>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42889
 2014-10-13 05:53:33 +00:00
Felix Fietkau
d2b08fb4ab x86: remove old soekris config hacks, install a more appropriate default /etc/config/network with lan+wan 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42888
 2014-10-12 20:25:30 +00:00
Felix Fietkau
275cef6363 image.mk: clean up and parallelize mkfs calls 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42878
 2014-10-12 15:00:49 +00:00
John Crispin
1bbc5de86e ralink: various i2c related fixes 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42868
 2014-10-10 08:56:53 +00:00
John Crispin
af1207b58c ramips: add support for Nexx WT1520 
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>

SVN-Revision: 42867
 2014-10-10 08:56:43 +00:00
Rafał Miłecki
78be7225c3 bcm53xx: prepare to support Asus RT-N18U 
DT file doesn't include any GPIOs yet, but let's add it as we got some
interest in this device on IRC.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42864
 2014-10-09 16:36:51 +00:00
Rafał Miłecki
9473673ae3 bcm53xx: add support for Buffalo WZR-1750DHP 
Let's generate a simple TRX file as we can't get encrypted one.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42863
 2014-10-09 16:36:05 +00:00
Steven Barth
195a618877 kernel: add missing symbols for 3.14 
spotted by buildbot brcm2708:
http://buildbot.openwrt.org:8010/builders/brcm2708/

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 42858
 2014-10-09 07:18:07 +00:00
Steven Barth
c118e5edf4 network: Unbind DHCPv6 from underlying interfaces 
This allows IPv6 to set up without IPv4 being up thus
IPv6-only or IPv6+DS-Lite working with the default config.

Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 42848
 2014-10-08 13:08:05 +00:00
Felix Fietkau
fa5237d936 cns3xxx: Adopt irq_domain support for cns3xxx gpio driver 
Have gpio driver adopt irqdomain support so that there are
non-overlapping allocations of irq numbers mapped to gpio's.

Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 42844
 2014-10-08 10:28:10 +00:00
Felix Fietkau
736419452b cns3xxx: fix shared PCI interrupt mapping 
This patch originally failed to combine INTA/B/C/D onto a single ARM CPU
interrupt. Instead, it mapped INTA/B/C and excluded D. This patch
corrects the issue by mapping all four interrupts to the single ARM CPU
interrupt. The original intent of the patch still holds as the newer PCB
take advantage of isolated interrupts. This fix only applies to older
PCB's that do not route INTA/B/C/D to unique external ARM CPU
interrupts.

Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 42830
 2014-10-07 10:37:48 +00:00
Felix Fietkau
0563e0225e cns3xxx: fix register for enabling MMC/SD pins 
also fixes a GPIO related regression from the upgrade to 3.10

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42829
 2014-10-07 10:37:09 +00:00
Rafał Miłecki
b9d3767ada kernel: move old "rootfs" splitter into separated file 
This will simplify removing it in the future.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42828
 2014-10-07 07:35:17 +00:00
Rafał Miłecki
2818493e82 bcm53xx: add Netgear R6300 V2 LEDs and buttons 
Thanks tusc (our forum user) for checking GPIOs.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42827
 2014-10-06 21:33:17 +00:00
John Crispin
ec69988d09 at91: remove support for TQMa9263 
This board is EOL, we should not bother anymore with it.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 42825
 2014-10-06 20:08:40 +00:00
John Crispin
c085d07ee3 lantiq - vgv7519: load rt5362 eeprom from bootloader param patition 
SVN-Revision: 42824
 2014-10-06 20:08:30 +00:00
John Crispin
6a961da231 lantiq - vgv7519: enable pci bus 
SVN-Revision: 42823
 2014-10-06 20:08:18 +00:00
John Crispin
c2e4007bc1 lantiq - vgv7519: remove spi_cs4, since the board use this line for something else 
SVN-Revision: 42822
 2014-10-06 20:08:11 +00:00
John Crispin
4cdf861521 lantiq - vgv7519: fix open-drain configuration for stp 
SVN-Revision: 42821
 2014-10-06 20:08:04 +00:00
John Crispin
1e7962ceaf lantiq - vgv7519: add pci-rst entry into dts 
SVN-Revision: 42820
 2014-10-06 20:07:56 +00:00
John Crispin
ea9aec2fa9 lantiq - vgv7519: remove exin definition copied from dev-board dts 
SVN-Revision: 42819
 2014-10-06 20:07:45 +00:00
John Crispin
9483a322dd lantiq - vgv7519: we don't have pcie bus so we don't need the reset device tree for this board 
SVN-Revision: 42818
 2014-10-06 20:07:30 +00:00
John Crispin
48d67fe650 lantiq - vgv7519: we don't have dual minipci-card so we don't need gnt1-req1 for pci handling 
SVN-Revision: 42817
 2014-10-06 20:07:19 +00:00
John Crispin
d0606948cb lantiq - vgv7519: fix gphy led configuration (this set correct alt function to gpio and let peripherials on pci bus to comes up) 
SVN-Revision: 42816
 2014-10-06 20:07:04 +00:00
John Crispin
7103d61271 lantiq: fix some alt function on pinctrl-xway 
SVN-Revision: 42815
 2014-10-06 20:06:51 +00:00
John Crispin
619de2faf2 octeon: add patches which are not upstreamed yet 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 42811
 2014-10-06 20:06:06 +00:00
John Crispin
7350373657 octeon: remove kmod-ath9k from default packages 
Looks like the targets are Ubiquiti routers which don't come with any wireless cards.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 42810
 2014-10-06 20:05:52 +00:00
John Crispin
90cbc9a04f octeon: prepare elf kernel image and md5sum for usb copying 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 42809
 2014-10-06 20:05:39 +00:00
John Crispin
3ff9c76e9e octeon: fix serial console for 3.14 kernel 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 42808
 2014-10-06 20:05:29 +00:00
John Crispin
97c202968a ralink: various i2c fixes 
the driver did not handle all states correctly causing a deadlock of the i2c hw block.

Signed-off-by: Ing.Michele Mogioni <michele.mogioni@unimc.it>

SVN-Revision: 42807
 2014-10-06 20:05:13 +00:00
Rafał Miłecki
d30e92884e kernel: add some warnings to the old (built-in) rootfs splitter 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42806
 2014-10-06 15:07:54 +00:00
Rafał Miłecki
a58a4bb580 kernel: enable CONFIG_MTD_SPLIT_SQUASHFS_ROOT 
This enables dedicated "rootfs" splitter by default. We still keep
CONFIG_MTD_SPLIT_SQUASHFS_ROOT, so the old (built-in) splitter will be
used as a fallback in case of problems.
Once we decide the dedicated partitioner works stable, we should remove
the old one completely.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42805
 2014-10-06 14:02:06 +00:00
Rafał Miłecki
b87ff2cae7 kernel: allow rootfs splitters to work without CONFIG_MTD_ROOTFS_SPLIT 
We want to remove that old (built-in) splitter at some point.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42804
 2014-10-06 13:49:11 +00:00
John Crispin
36faa5b145 lantiq: led name has changed from adsl -> dsl 
make the notify script aware of this.

https://dev.openwrt.org/ticket/18005

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42798
 2014-10-06 05:18:52 +00:00
John Crispin
e77ae183a1 ar71xx: correctly detect hardware revision on TP-LINK Archer C5 and C7 
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 42797
 2014-10-06 04:53:34 +00:00
John Crispin
7f772910a1 ar71xx: fix syntax for TP-LINK TL-WR941N/ND / Rosewill RNX-N360RT detection 
[ ] conditions should use = instead of == for string equality.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 42796
 2014-10-06 04:53:25 +00:00
John Crispin
05777fb947 ar71xx: simplify TP-LINK model detection 
All TP-LINK machine names begin with "TP-LINK", so there's no need to check for
more specific model names. This also allows adding new models like the Archer
series more easily.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 42795
 2014-10-06 04:53:20 +00:00
John Crispin
73acd5050f ar71xx: add support for TP-LINK TL-WR847N v8 (clone of TL-WR841N/ND v8) 
Signed-off-by: Jaehoon You <teslamint@gmail.com>

SVN-Revision: 42792
 2014-10-06 04:52:57 +00:00
John Crispin
d76b7e0221 ramips: D-Link DIR-810L: make led naming consistent with other boards 
Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 42789
 2014-10-06 04:52:36 +00:00
John Crispin
98114e7cdd ralink: Add missing code to free GPIO on Ralink SoC 
Signed-off-by: schildt@ibr.cs.tu-bs.de
Acked-by: info@gerhard-bertelsmann.de

SVN-Revision: 42788
 2014-10-06 04:52:26 +00:00
John Crispin
491e028e2d ar71xx: add LED defaults for the EnGenius ESR1750 
Signed-off-by: Forest Crossman <cyrozap@gmail.com>

SVN-Revision: 42786
 2014-10-06 04:52:13 +00:00
John Crispin
b04bb3eea7 ramips: Support for RAMIPS based Tripmate HT-TM02 board 
Provides support for the Tripmate HT-TM02 personal router including LEDs and
reset button. “Mode” switch is not supported. New profile includes full set
of packages required to enable LEDs, USB, and LUCI. Patches were applied
against trunk snapshot r42649. Functionality has been tested in AP, basic wifi
client, wifi router, and routed client modes - all good.

Signed-off-by: Ron Curry <wingspinner@gmail.com>

SVN-Revision: 42785
 2014-10-06 04:52:07 +00:00
John Crispin
e2c3c2280c ar71xx: fix reset button gpio for OM2P/OM2P-HS 
A typo in the definition for the OM2P reset button disabled its functionality
in OpenWrt. The actual button for these two devices is "1" and not "11".

Signed-off-by: Oren Poleg <oren@poleg.org>
[sven@open-mesh.org: added a commit subject+message]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 42782
 2014-10-06 04:51:51 +00:00
Felix Fietkau
f35da063bc targets: remove useless quotes around KERNELNAME 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42780
 2014-10-05 20:17:19 +00:00
Zoltan Herpai
fbbce1c8d8 sunxi: re-add rootfs build when no profile is set, fixes #17980, thanks. 
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 42775
 2014-10-05 17:32:36 +00:00
Jonas Gorski
14ebb012a4 brcm63xx: fix wrong fixups pointer 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42756
 2014-10-03 11:03:58 +00:00
Rafał Miłecki
7436b17075 bcm53xx: build R6250 firmware with "Other Regions" region 
This prevents vendor firmware from warning about incompatible region.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42754
 2014-10-03 10:40:12 +00:00
Felix Fietkau
156b296b20 ar8216: set the pvid based on runtime state instead of port number to fix learning with enable_vlan = 0 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42753
 2014-10-02 20:00:41 +00:00
Rafał Miłecki
66922082ed bcm53xx: early support for Netgear R6300 V2 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42743
 2014-10-02 19:30:08 +00:00
Jonas Gorski
2fa8a656a6 brcm63xx: update spw500v sprom to values from gpl tarball 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42740
 2014-10-02 12:26:36 +00:00
Jonas Gorski
60cb45427e brcm63xx: reorder some patches according to their upstream state 
The irq rewrite was accepted upstream.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42739
 2014-10-02 12:26:19 +00:00
Jonas Gorski
57214b00ae brcm63xx: Add DT support for 96368MVWG 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42738
 2014-10-02 12:26:07 +00:00
Jonas Gorski
477826ef31 brcm63xx: Add DT support for 96368MVNgr 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42737
 2014-10-02 12:25:57 +00:00
Jonas Gorski
cdea47cbc3 brcm63xx: Add DT support for 96358VW2 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42736
 2014-10-02 12:25:41 +00:00
Jonas Gorski
80db30b508 brcm63xx: Add DT support for 96358VW 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42735
 2014-10-02 12:25:36 +00:00
Jonas Gorski
e7ade47fba brcm63xx: Add DT support for 96338W 
Renamed of_board_id to convention.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42734
 2014-10-02 12:25:27 +00:00
Jonas Gorski
d9194da882 brcm63xx: Add DT support for 96338GW 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42733
 2014-10-02 12:25:22 +00:00
Jonas Gorski
73f576dff2 brcm63xx: Add DT support for 96348R 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42732
 2014-10-02 12:25:13 +00:00
Jonas Gorski
35cf1adfc6 brcm63xx: Add DT support for 96348GW-11 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42731
 2014-10-02 12:25:07 +00:00
Jonas Gorski
eaee4e3eb7 brcm63xx: Add DT support for 96348GW-10 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42730
 2014-10-02 12:25:01 +00:00
Jonas Gorski
73d59ed675 brcm63xx: Add DT support for 96348GW 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42729
 2014-10-02 12:24:39 +00:00
Jonas Gorski
99ecfbf702 brcm63xx: Add DT support for 96345GW2 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42728
 2014-10-02 12:24:34 +00:00
Jonas Gorski
a950e2fce8 brcm63xx: Add DT support for 963281TAN 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42727
 2014-10-02 12:24:29 +00:00
Jonas Gorski
ddcc29290c brcm63xx: fix brcm63xx fallback typo 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42726
 2014-10-02 12:24:14 +00:00
Rafał Miłecki
28301ea0b1 bcm53xx: early buttons support (without interrupts) 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42718
 2014-10-02 12:05:58 +00:00
Rafał Miłecki
bd12c49473 bcm53xx: backport bcma RFC patch that fixes LEDs 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42717
 2014-10-02 10:42:30 +00:00
Rafał Miłecki
01ab343779 bcm53xx: support devices with more (13+) partitions 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42716
 2014-10-02 09:51:54 +00:00
Rafał Miłecki
bbae0f7df0 bcm53xx: select LEDs support by default 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42715
 2014-10-02 05:54:18 +00:00
Rafał Miłecki
1421516e65 bcm53xx: add BCM5301X patches sent upstream (bus and R6250 LEDs) 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42711
 2014-10-01 13:38:50 +00:00
Rafał Miłecki
59b965194d kernel: update bcma to the tag master-2014-09-30 (wireless-next) 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42710
 2014-10-01 13:37:36 +00:00
Rafał Miłecki
26e85084b5 bcm53xx: rename BCM5301X DTS patch to match upstream order 
SVN-Revision: 42708
 2014-10-01 07:59:03 +00:00
Zoltan Herpai
175aad61d4 sunxi: add profile for Olimex A13 SOM 
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 42693
 2014-09-28 23:21:59 +00:00
Hauke Mehrtens
a6616a6e48 bcm53xx: activate some workarounds for errors in the Cortex-A9 
BCM4708 uses a Cortex-A9 rev r3p0 and a L2C-310 rev r3p2.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42690
 2014-09-28 18:03:33 +00:00
Felix Fietkau
61f960071d ar71xx: revert accidental kernel upgrade 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42687
 2014-09-27 20:54:12 +00:00
Felix Fietkau
3e833dcf90 ar71xx: add wmac callback for reading soc revision on ar934x 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42685
 2014-09-27 20:52:05 +00:00
Felix Fietkau
84d81d5844 ar71xx: refresh 3.14 kernel patches 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42684
 2014-09-27 20:51:49 +00:00
Florian Fainelli
54a18b3fe8 brcm2708: switch to 3.14 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 42681
 2014-09-27 19:11:55 +00:00
Florian Fainelli
3f5cc1882b brcm2708: add 3.14 support 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 42680
 2014-09-27 19:11:37 +00:00
Florian Fainelli
04c0ef5263 kernel: add missing CONFIG_BACKLIGHT_GPIO to 3.14 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 42679
 2014-09-27 19:11:06 +00:00
Florian Fainelli
6918ea2484 brcm2708: update 3.10 patches with raspberrypi/rpi-3.10.y of 27 Apr. 2014 
Update the 3.10 rasperry patches by rebasing raspberry/rpi-3.10-y
against linux-stable/v3.10.49.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 42678
 2014-09-27 19:10:51 +00:00
Rafał Miłecki
71a03fb168 kernel: merge two mtdpart.c patches 
It does not make sense to add some code and remove is 4 patches later.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42673
 2014-09-27 09:44:24 +00:00
Rafał Miłecki
8e525a43b4 kernel: update bcma to the tag master-2014-09-26 (wireless-next) 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42672
 2014-09-27 07:49:48 +00:00
Florian Fainelli
e5ef34ba02 realview: add protocol argument to ucidef_set_interface_raw 
Now that ucidef_set_interface_raw() has been updated to take a protocol
argument, use that.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 42666
 2014-09-25 19:09:17 +00:00
Rafał Miłecki
747fd7871c bcm53xx: add a patch that fixes booting problems 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42659
 2014-09-24 21:08:17 +00:00
Felix Fietkau
38a8f5ae63 ar71xx: ar8216: tagged+untagged on ar8327 (#12181) 
This allows tagged and untagged traffic together on the same port on ar8327
switch devices.

I looked at the first attempt to do this in r40777 (ar71xx: Fix tagged+untagged
operation on AR8327N (#12181)). I also set the vlan and port egress policies
like that change. But I change vlan_tagged in an less intrusive way. The
tagged/untagged decision is now based on the following rules:
- if vid != pvid then traffic is always tagged
- if vid == pvid then vlan_tagged stores if the traffic should be tagged

Tested on TP-Link WDR-3600 (ar8327N).

Signed-off-by: Valentin Spreckels <Valentin.Spreckels@Informatik.Uni-Oldenburg.DE>

SVN-Revision: 42653
 2014-09-23 10:19:58 +00:00
Felix Fietkau
1c675ee9be ar71xx: ar8216: move policies, pvid to setup_port 
This moves ingress, egress policy and pvid decisions to setup_port methods.
They arenow device type dependent.

This allows policy changes on only one device type which is needed to allow
tagged + untagged operation on ar8327.

Tested on TP-LINK WDR-3600 (ar8327N).

Signed-off-by: Valentin Spreckels <Valentin.Spreckels@Informatik.Uni-Oldenburg.DE>

SVN-Revision: 42652
 2014-09-23 10:18:38 +00:00
Zoltan Herpai
9c43ea9a8b mxs: remove 3.13 
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 42651
 2014-09-23 06:42:29 +00:00
Zoltan Herpai
5105e10608 mxs: disable mmc debugging 
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 42650
 2014-09-23 06:38:58 +00:00
Rafał Miłecki
f036f5801f bcm53xx: image: use IMG_PREFIX for chk images 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42649
 2014-09-22 18:11:09 +00:00
Rafał Miłecki
23a07c6d18 bcm53xx: image: make filesystem a suffix for TRX files 
This makes TRX files more /compatible/ with firmware files (e.g. CHK).
This will allow us to put some TRX files in BIN_DIR if we need to.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42646
 2014-09-22 09:16:20 +00:00
Rafał Miłecki
fd515112db bcm53xx: image: document arguments of various functions 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42645
 2014-09-22 08:37:18 +00:00