KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
36427 commits 1 branch 0 tags 154 MiB
Commit graph

462 commits

Author SHA1 Message Date
Felix Fietkau
fac693441f bcm53xx: fix kernel config after USB2 PHY driver backport 
Signed-off-by: Felix Fietkau <nbd@nbd.name>
 2016-07-08 13:45:36 +02:00
Rafał Miłecki
1692c71564 bcm53xx: use upstream fix simplifying USB power GPIO usage 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
 2016-07-07 15:07:02 +02:00
Rafał Miłecki
c74c227e5b bcm53xx: backport driver for Northstar's USB 2.0 PHY 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
 2016-07-07 14:50:17 +02:00
Rafał Miłecki
e71fffed64 bcm53xx: backport BCM5301x patches from 2016-07-06 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
 2016-07-07 13:54:55 +02:00
Rafał Miłecki
eaf0d22421 bcm53xx: calculate Seama MD5 using content of kernel partition 
We don't want checksum to cover any part of UBI as even its part with
SquashFS may be changed due to e.g. flash wearing.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
 2016-07-04 12:32:12 +02:00
Rafał Miłecki
3c014dc306 Revert "bcm53xx: use uncompressed zImages" 
This reverts commit b3be33f135.

CFE is known to fail in some non-standard cases, e.g. when using kernel
or format different that what was tested by Broadcom. This kernel change
triggered some problem with booting OpenWrt kernel stored in Seama.

As long as Seama checksum was covering enough data, it was working fine.
We need to change it however, because calculating MD5 over part of UBI
containing SquashFS is unsafe. UBI may move PEBs depending on flash
wearing level which would break CFE booting the image.

For some reason this kernel change was breaking CFE. Calculating MD5
over 0x47ffc0 B data or less (there is 0x40 B long header) was stopping
booting process at:
Starting program at 0x00008000

As our kernel is usually 0x3fffc0 B it was affected by this problem.

Reverting this change fixes sysupgrade (which already uses kernel size
for MD5 calculation) and will allow us to adjust "fixseama" command call
on the first boot.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
 2016-07-04 12:32:12 +02:00
Ben Whitten
b7baaaf782 kernel: Move append-dtb to common image-commands 
This build step is used by various targets, move it to a common section.

Signed-off-by: Ben Whitten <ben.whitten@gmail.com>
 2016-06-22 19:32:06 +02:00
Rafał Miłecki
a180f90518 bcm53xx: backport BCM5301X patches for SRAB 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
 2016-06-20 23:07:31 +02:00
Rafał Miłecki
776b24d9aa bcm53xx: properly support sysupgrade using Seama on NAND devices 
It updates kernel and then formats UBI without loosing erase counters.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
 2016-06-20 08:02:32 +02:00
Rafał Miłecki
cf6d9d97fb kernel: rename B53 symbols to avoid upstream kernel conflict 
In kernel 4.7 there is upstreamed b53 driver using (mostly?) the same
symbols as our b53 does. Change our symbols so both drivers can coexist
in kernel tree.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Jonas Gorski <jonas.gorski@gmail.com>
 2016-06-20 08:00:14 +02:00
Felix Fietkau
b3be33f135 bcm53xx: use uncompressed zImages 
The boot loader expects LZMA compressed kernel images

Signed-off-by: Felix Fietkau <nbd@nbd.name>
 2016-06-15 14:36:47 +02:00
Felix Fietkau
f27c70ff8c bcm53xx: refresh kernel config 
Signed-off-by: Felix Fietkau <nbd@nbd.name>
 2016-06-15 14:36:47 +02:00
Rafał Miłecki
489efcfd62 bcm53xx: refresh kernel config 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
 2016-06-14 12:19:38 +02:00
Rafał Miłecki
cb0de9a68e bcm53xx: sysupgrade: move TRX specific code to separated function 
This will allow adding support for other formats (e.g. Seama) in a clean
way.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
 2016-06-13 22:52:04 +02:00
Rafał Miłecki
1f86257c2f bcm53xx: pass datasize to mtd in hexadecimal format 
This avoids extra calculation in bash script.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
 2016-06-11 01:38:00 +02:00
Rafał Miłecki
c40e96d133 bcm53xx: fix partition typos in 09_fix_crc 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
 2016-06-11 01:37:41 +02:00
Rafał Miłecki
95d8568cb8 bcm53xx: calculate TRX CRC32 using whole kernel partition 
This provides better protection of flash data.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
 2016-06-10 12:58:19 +02:00
Felix Fietkau
7eeb254cc4 treewide: replace nbd@openwrt.org with nbd@nbd.name 
Signed-off-by: Felix Fietkau <nbd@nbd.name>
 2016-06-07 08:58:42 +02:00
Álvaro Fernández Rojas
a105eac4dd kernel: update kernel 4.4 to version 4.4.12 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2016-06-02 15:34:34 +02:00
Rafał Miłecki
01714243b9 bcm53xx: drop Copyright header from two of my bash scripts 
Both scripts modified by this patch were added by me. First of all I
incorrectly added OpenWrt as Copyright holder. It was wrong because:
1) I simply can't transfer my moral rights according to the Polish law
2) Transfering copyrights (economic rights) requires an agreement which
   I didn't sign with OpenWrt(.org).
Other than that I don't find these trivial scripts important enough to
put info about *my* copyrights in a header so this patch just drops them
completely.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
 2016-05-18 08:35:00 +02:00
Felix Fietkau
3f1705d777 bcm53xx: delete old kernel versions 
Signed-off-by: Felix Fietkau <nbd@nbd.name>
 2016-05-12 17:54:14 +02:00
Álvaro Fernández Rojas
b062266ad6 kernel: update kernel 4.4 to version 4.4.9 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2016-05-10 10:43:17 +02:00
Rafał Miłecki
cf3b3cfc56 bcm53xx: add m25p80 workaround for SPI flash writing problems 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 49264
 2016-04-28 11:48:51 +02:00
Rafał Miłecki
9e4d671f75 bcm53xx: support SPI-NOR on dual flash devices 
We need it to access NVRAM.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 49262
 2016-04-28 11:48:51 +02:00
Rafał Miłecki
741715331a bcm53xx: switch to m25p80 and drop bcm53xxspiflash 
For some time now m25p80 supports 32 MiB flashes and we just needed to
patch spi-nor to support JEDEC incompatible w25q128. Also by switching
to m25p80 we gain accelerated SPI flash reads.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 49260
 2016-04-28 11:48:50 +02:00
Rafał Miłecki
73d51d7b5d bcm53xx: support JEDEC incompatible w25q128 in spi-nor 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 49259
 2016-04-28 11:48:50 +02:00
Rafał Miłecki
e53d533a24 bcm53xx: backport BCM5301X DT patch specifying SPI controller 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 49232
 2016-04-26 09:22:49 +00:00
Rafał Miłecki
2be5203055 bcm53xx: bump maximum TRX size for devices with serial flash 
It was already increased for NAND devices so do the same for the ones
with serial memory.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 49207
 2016-04-20 18:14:01 +00:00
Hauke Mehrtens
f0b3964f1b kernel: update kernel 4.4 to version 4.4.7 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 49176
 2016-04-16 21:05:48 +00:00
Rafał Miłecki
d30766c986 bcm53xx: backport BCM5301X earlycon and USB VCC patches 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 49166
 2016-04-14 05:54:20 +00:00
Rafał Miłecki
93550152ed bcm53xx: add switch config workaround for R8500 and DIR-885L 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 49160
 2016-04-09 13:23:25 +00:00
Rafał Miłecki
e2893fa8c3 bcm53xx: fix regression in generating network config 
Syntax error was added in r49122.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 49159
 2016-04-09 13:20:19 +00:00
Rafał Miłecki
997a3cb41c bcm53xx: add basic support for Netgear R7900 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 49122
 2016-04-09 09:59:21 +00:00
Rafał Miłecki
c658bd634c bcm53xx: add PCI iproc patch adding abort handler 
This prevents die() during PCI bus probe.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 49121
 2016-04-08 20:37:14 +00:00
Rafał Miłecki
51d887ba00 Revert "bcm53xx: revert patch removing imprecise abort workaround" 
This reverts commit r48961. It didn't fix PCIe host driver issue as
there are more aborts triggered by it.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 49120
 2016-04-08 20:36:57 +00:00
Rafał Miłecki
faf172875e bcm53xx: use the final fix for iproc bcma regression 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 49114
 2016-04-01 16:49:50 +00:00
Rafał Miłecki
970dc268e7 bcm53xx: drop unneeded 4.3 SPROM patch 
4.3 isn't oficially used anymore but it may be useful for debugging PCI
host driver regression. SPROM driver doesn't seem to work correctly with
4.3:
[    2.336686] bcma: bus0: Using fallback SPROM failed (err -2)
[    2.342366] bcma: bus0: No SPROM available
but it at least compiles now.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 49113
 2016-04-01 16:49:34 +00:00
Rafał Miłecki
e3e8a85c4f bcm53xx: improve USB 2.0 PHY support for BCM4709 and BCM47094 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 49094
 2016-03-30 12:26:24 +00:00
Rafał Miłecki
de2f31c3f5 bcm53xx: support USB 3.0 PHY on BCM4707 rev. 6 and BCM47094 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 49091
 2016-03-30 10:23:02 +00:00
Rafał Miłecki
7b61ed5254 bcm53xx: simpify USB 3.0 PHY initialization 
We can use one code path for BCM4707 rev. 4 and BCM53018.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 49090
 2016-03-30 10:22:57 +00:00
Hauke Mehrtens
fcbc97ad78 kernel: update kernel 4.1 to version 4.1.20 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 49035
 2016-03-18 23:41:21 +00:00
Rafał Miłecki
baf0b18653 bcm53xx: update bcm47xx_sprom to the latest 4.6 queued version 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48963
 2016-03-08 11:05:10 +00:00
Rafał Miłecki
81edbe39b8 bcm53xx: fix SPROM driver compilation with ssb/bcma as module 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48962
 2016-03-08 08:29:32 +00:00
Rafał Miłecki
9f116fae92 bcm53xx: revert patch removing imprecise abort workaround 
It seems it still happens on some devices.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48961
 2016-03-08 08:29:29 +00:00
Rafał Miłecki
dab0569b97 bcm53xx: use SPROM driver queued for 4.6 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48935
 2016-03-06 18:08:03 +00:00
Hauke Mehrtens
cb04b8d582 kernel: update kernel 4.4 to version 4.4.3 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48783
 2016-02-25 21:54:39 +00:00
Rafał Miłecki
406a288a3b bcm53xx: add Netgear R8500 GPIOs 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48633
 2016-02-05 12:33:50 +00:00
Rafał Miłecki
3b76c7cf0b bcm53xx: start working on Netgear R8500 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48625
 2016-02-03 22:32:07 +00:00
Rafał Miłecki
a8c2701866 bcm53xx: fix bcma-hcd compilation in kernel 4.4 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48607
 2016-02-01 12:54:17 +00:00
Rafał Miłecki
8095667532 bcm53xx: build D-Link DIR-885L image 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48606
 2016-02-01 12:43:04 +00:00
Rafał Miłecki
88deb4aec1 bcm53xx: change brcmnand behavior for ECC strength 1 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48605
 2016-02-01 12:42:51 +00:00
Rafał Miłecki
f188b6d512 bcm53xx: fix NAND parameters on DIR-885L 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48604
 2016-02-01 12:42:42 +00:00
Rafał Miłecki
701dba093f bcm53xx: add brcmnand patch reading flash parameters 
It's useful for adding support for new hardware.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48603
 2016-02-01 12:42:23 +00:00
Rafał Miłecki
78abece62f bcm53xx: include (build) Seama mtdsplit parser 
It's needed for devices using Seama like D-Link DIR-885L.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48602
 2016-02-01 12:42:07 +00:00
Rafał Miłecki
9a69e00baa bcm53xx: support Netgear R8500 in sysupgrade 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48572
 2016-01-30 16:57:35 +00:00
Rafał Miłecki
12ec144892 bcm53xx: use proper CPU port in b53 for Netgear R8500 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48571
 2016-01-30 16:56:50 +00:00
Rafał Miłecki
926c8dfc7b bcm53xx: specify magic expected in sysupgrade for D-Link DIR-885L 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48553
 2016-01-29 22:31:43 +00:00
Rafał Miłecki
c0edf30bdc bcm53xx: basic support for Seama format in sysupgrade 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48535
 2016-01-28 22:38:37 +00:00
Rafał Miłecki
518ad4763a bcm53xx: fix MD5 in Seama format on flash after installing OpenWrt 
We need to fix Seama just like we fix TRX due to the rootfs mark.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48522
 2016-01-28 08:51:58 +00:00
Rafał Miłecki
22eb2c1bf2 bcm53xx: enable earlyprintk and all RAM on DIR-885L 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48520
 2016-01-28 08:51:46 +00:00
Rafał Miłecki
6bdb024391 bcm53xx: add D-Link DIR-885L DT patch 
We don't build image for this device yet.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48519
 2016-01-28 07:01:23 +00:00
Rafał Miłecki
512e0fca81 bcm53xx: replace iproc regression fix with the final one 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48518
 2016-01-28 07:01:17 +00:00
Rafał Miłecki
80bd8f3d09 bcm53xx: use two upstream USB bcma patches 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48517
 2016-01-28 07:01:09 +00:00
Rafał Miłecki
39f1157075 bcm53xx: switch to kernel 4.4 
Initially 4.4 didn't work on bcm53xx because network was breaking few
seconds after setting interfaces. It's fixed since r48059 (switching
from 4.4-rc5 to 4.4-rc7).

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48510
 2016-01-27 12:44:07 +00:00
Rafał Miłecki
1dfa8f37db bcm53xx: detect Seama sysupgrade format 
It's used e.g. by D-Link devices. We don't support it yet.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48509
 2016-01-27 10:40:58 +00:00
Felix Fietkau
57776e68ce base-files: remove default /etc/config/network, generate it via board.d instead 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48493
 2016-01-25 16:30:41 +00:00
Rafał Miłecki
a6ec12bb09 bcm53xx: fix iProc regression with sent patch instead of a revert 
This properly fixes #21393.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48423
 2016-01-21 05:59:16 +00:00
Rafał Miłecki
7c2356e2a0 bcm53xx: revert iProc patch adding PAXC support 
It broke detecting some PCIe devices. This fixes (workarounds) #21393.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48382
 2016-01-19 22:53:21 +00:00
Rafał Miłecki
b9fb3d4524 bcm53xx: update iProc patches (V5 accepted in helgaas/pci.git next) 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48375
 2016-01-19 21:53:23 +00:00
Rafał Miłecki
000295f8ba bcm53xx: move iProc patches that went mainline 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48370
 2016-01-19 20:59:10 +00:00
Rafał Miłecki
bba8f059d7 bcm53xx: backport iProc Kconfig fixes 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48369
 2016-01-19 20:58:53 +00:00
Rafał Miłecki
1dfa369c98 bcm53xx: group iProc patches into patchsets they were sent in 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48368
 2016-01-19 20:58:48 +00:00
Hauke Mehrtens
cdb83aaf5f kernel/4.3: update to version 4.3.3 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de

SVN-Revision: 48224
 2016-01-12 20:52:19 +00:00
Hauke Mehrtens
93b50ade93 kernel/4.1: update to version 4.1.15 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48223
 2016-01-12 20:51:34 +00:00
Hauke Mehrtens
ba3a749f9b kernel: refresh patches for kernel 4.4 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48222
 2016-01-12 20:50:41 +00:00
Felix Fietkau
2499a57d92 targets: add kernel image dependencies on device tree files 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48146
 2016-01-06 18:39:06 +00:00
Rafał Miłecki
e17c1e45ad bcm53xx: fix USB patch breaking 4.4 compilation 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48112
 2016-01-04 12:28:46 +00:00
Rafał Miłecki
ccb7d794ff kernel: update bcma by backporting 4.4 and 4.5 patches 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48111
 2016-01-04 12:22:24 +00:00
Rafał Miłecki
ef53dc754f bcm53xx: switch to simpler devm_gpiod_get in USB driver 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48062
 2016-01-02 10:49:46 +00:00
Rafał Miłecki
7bede46e58 kernel: make bcm47xxpart work with TRX flashed at bad block(s) 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48061
 2016-01-02 00:33:48 +00:00
Rafał Miłecki
224984ca01 kernel: drop bcm47xxpart patch for Xiaomi 
It was never tested, most likely not working (because of le32_to_cpu)
and not upstreamed.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48060
 2016-01-02 00:33:31 +00:00
Rafał Miłecki
716905b986 bcm53xx: print bcm47xxpart buf to debug R8000 UBI problem 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 47896
 2015-12-16 09:37:16 +00:00
Jo-Philipp Wich
67e1c87012 all: drop old uci-defaults.sh 
Replace former uci-defaults.sh implementation with the uci-defaults-new.sh one
and update all users accordingly.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47867
 2015-12-11 15:26:06 +00:00
Rafał Miłecki
dce5a5b9db bcm53xx: update BCM5301X SMP patch to fixed version from stblinux 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 47810
 2015-12-07 20:43:49 +00:00
Rafał Miłecki
c8c708f367 bcm53xx: fix selecting HAVE_SMP symbol in Kconfig 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 47809
 2015-12-07 19:56:12 +00:00
Rafał Miłecki
b473cd8085 bcm53xx: use backported BCM5301X patches from stblinux soc/next 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 47807
 2015-12-07 19:20:40 +00:00
Rafał Miłecki
3333f75caf kernel: add bcm47xxpart patches sent for 4.5 merge window 
This replaces old bcm53xx patch for scanning whole flash and makes
bcm47xxpart compatible with NAND.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 47800
 2015-12-07 09:31:52 +00:00
Hauke Mehrtens
cf6b9cdbe4 kernel: add missing config options for kernel 4.4 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47796
 2015-12-06 13:32:36 +00:00
Jo-Philipp Wich
527ec2af59 all: remove dummy ucidef_set_interface_loopback() from board.d 
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47744
 2015-12-03 23:13:00 +00:00
Jo-Philipp Wich
8f8b702f85 board.d: remove redundant ucidef_set_interfaces_lan_wan() calls 
This removes calls to ucidef_set_interfaces_lan_wan() and
ucidef_set_interfaces_lan() on boards where all relevant info can be
inferred from the switch definition.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47722
 2015-12-03 17:30:56 +00:00
Jo-Philipp Wich
9b02e73188 board.d: merge ucidef_add_switch() and ucidef_add_switch_ports() 
This changes uci-defaults-new.sh, config_generate and all relevant board.d
files in order combine ucidef_add_switch() and ucidef_add_switch_ports() into
a single function.

Also removes now superfluous enable and reset arguments.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47721
 2015-12-03 17:30:24 +00:00
Rafał Miłecki
2bcbe28580 bcm53xx: move BCM5301X patches to use 08x prefix 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 47713
 2015-12-03 11:03:07 +00:00
Rafał Miłecki
9f3300393a bcm53xx: use backported versiions or R8000 & dt-bindings patches 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 47711
 2015-12-03 10:51:52 +00:00
Rafał Miłecki
0dda38b472 bcm53xx: fix typo in BCM5310X (patch name and subject) 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 47710
 2015-12-03 10:51:42 +00:00
Rafał Miłecki
4333cb73f7 bcm53xx: move & update accepted USB patch for GPIO control 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 47709
 2015-12-03 10:51:32 +00:00
Rafał Miłecki
448bf7819b bcm53xx: use backported BCM5301X patches from stblinux devicetree/next 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 47708
 2015-12-03 10:19:16 +00:00
Rafał Miłecki
7eed5caecd bcm53xx: use backported BCM5301X patches from stblinux soc/next 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 47707
 2015-12-03 10:18:57 +00:00
Rafał Miłecki
4e837fa130 bcm53xx: set vcc-gpio properties in one patch 
No reason to handle Buffalo WXR-1900DHP in separated patch.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 47706
 2015-12-03 08:36:41 +00:00
Rafał Miłecki
0641728fa2 bcm53xx: drop fixed clock from DTS for Buffalo WXR-1900DHP 
We don't use fixed clock in 4.4 (and 4.3) anymore.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 47705
 2015-12-03 08:36:34 +00:00
Rafał Miłecki
2766887751 bcm53xx: update linux 4.4 config 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 47704
 2015-12-03 08:19:30 +00:00