Commit graph

2358 commits

Author SHA1 Message Date
Hauke Mehrtens
69aaf1cd78 kernel: add missing config options
This broke the build for the x86 generic target.
This was found by the build bot.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-05-27 11:30:38 +02:00
Hauke Mehrtens
0b17375931 kernel: update kernel 4.9 to 4.9.30
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-05-27 00:48:37 +02:00
Koen Vandeputte
e842e16f45 kernel: update kernel 4.9 to 4.9.29
- Refresh all patches
- Removed upstreamed
- Adapted 1

Compile tested on: bcm53xx, cns3xxx, imx6, lantiq
Run tested on: cns3xxx & imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
[update from 4.9.28 to 4.9.29]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-05-21 21:51:22 +02:00
Kevin Darbyshire-Bryant
088e28772c kernel: update kernel 4.4 to version 4.4.69
Refresh patches. A number of patches have landed upstream & hence are no
longer required locally:

062-[1-6]-MIPS-* series
042-0004-mtd-bcm47xxpart-fix-parsing-first-block

Reintroduced lantiq/patches-4.4/0050-MIPS-Lantiq-Fix-cascaded-IRQ-setup
as it was incorrectly included upstream thus dropped from LEDE.
As it has now been reverted upstream it needs to be included again for
LEDE.

Run tested ar71xx Archer C7 v2 and lantiq.

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
[update from 4.4.68 to 4.4.69]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-05-21 21:48:16 +02:00
Luka Perkov
83e4ed3497 generic: refresh patches
Signed-off-by: Luka Perkov <luka.perkov@sartura.hr>
2017-05-14 00:34:04 +02:00
Alexey Brodkin
2b27e62e74 linux-4.9: Fix building of DWC3 module
DWC3 driver uses of_usb_get_phy_mode() which is
implemented in drivers/usb/phy/of.c and in bare minimal
configuration it might not be pulled in kernel binary.

In case of ARC or ARM this could be easily reproduced with
"allnodefconfig" +CONFIG_USB=m +CONFIG_USB_DWC3=m.

On building all ends-up with:
---------------------->8------------------
  Kernel: arch/arm/boot/Image is ready
  Kernel: arch/arm/boot/zImage is ready
  Building modules, stage 2.
  MODPOST 5 modules
ERROR: "of_usb_get_phy_mode" [drivers/usb/dwc3/dwc3.ko] undefined!
make[1]: *** [__modpost] Error 1
make: *** [modules] Error 2
---------------------->8------------------

This was affecting Lede in case of CONFIG_ALL_KMODS=y.

The patch is already scheduled for v4.12 and once it is backported to
4.9.y it must be removed from here.

Note this patch makes sense not only for ARC instead it fixes
a generic issue which may affect more arches and platforms thus
putting it in "generic/" folder.

Signed-off-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [patch rename]
2017-05-02 15:17:30 +02:00
Felix Fietkau
0b7ed65cec kernel: remove out of tree direct-io disable hack
Direct-IO support has to be enabled for the release build anyway, so
this hack is not worth keeping

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-04-26 10:27:45 +02:00
Kevin Darbyshire-Bryant
f4ae444f3e generic: rtl8366rb: add support for initvals from DTS
Allow per-device initvals in the DTS file for rlt8366rb
switches.

Shamelessly copies 30494598f8

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2017-04-25 19:29:59 +02:00
Álvaro Fernández Rojas
2db05cd199 kernel: use skb_cow_head() to deal with cloned skbs
We need to ensure there is enough headroom to push extra header,
but we also need to check if we are allowed to change headers.

skb_cow_head() is the proper helper to deal with this.

Fixes Ethernet<->WiFi bridge for Raspberry Pi and probably other devices.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2017-04-23 13:51:55 +02:00
Mathias Kresin
226e194335 generic: mtd: backport mx25u25635f stateless 4b support
Use the stateless 4-byte op codes for this flash chip to fix reboot
hangs on SoCs expecting the flash chip in 3-byte mode.

Fixes: FS#179

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-04-19 21:00:52 +02:00
Rafał Miłecki
74b69ffea7 kernel: backport Broadcom thermal drivers
This includes driver for Northstar and for Raspberry Pi.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-04-14 22:57:47 +02:00
Florian Fainelli
c47a769a30 kernel: Add various arm64-related symbols
In preparation for bumping arm64 to 4.9, add a bunch of configuration
symbols that are available under arm64.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-04-11 15:17:08 -07:00
Mathias Kresin
4a4c00e7c4 ath9k: drop obsolete patch
Now that the wireless LEDs are added via platform leds this patch isn't
required any longer.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-04-08 14:30:00 +02:00
Mathias Kresin
136718a3d9 kernel: update MIPS pci fix to the accepted version
Fix the list order instead of adjusting the controller scan order.
Revert the former required changes to the lantiq PCIe driver.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-04-08 14:30:00 +02:00
Rafał Miłecki
f6433eede7 kernel: move initramfs's init script out of base-files
Keeping it in base-files was resulting in adding it to the base-files
package. This file is meant to be included manually for initramfs
images only.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-04-04 14:06:40 +02:00
Hauke Mehrtens
c3778f2647 kernel: update kernel 4.4 to 4.4.59
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-04-02 12:48:00 +02:00
Hauke Mehrtens
b26e34214c kernel: update kernel 4.9 to 4.9.20
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-04-02 12:47:55 +02:00
John Crispin
97e6b67291 kernel: fix ubi auto attach logging
The patch is missing a trailing new line

Signed-off-by: John Crispin <john@phrozen.org>
2017-04-02 07:51:33 +02:00
Vittorio Gambaletta
967b6be118 ar8327: Add workarounds for AR8337 switch.
RGMII RX delay setting needs to be always specified for AR8337 to
avoid port 5 RX hang on high traffic / flood conditions.

Also, the HOL registers that set per-port and per-packet-priority
buffer sizes are updated with the reduced values suggested by the
QCA switch team.

Finally, AR8327 reserved register fixups are disabled for the AR8337.

This patch is adapted from the Code Aurora QSDK, but with magic
values mapped to proper defines.

Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
2017-03-30 09:48:52 +02:00
Hauke Mehrtens
02fe942337 kernel: add arm64 erratums into config
Deactivate all the ARM64 erratums by default. The target code should
activate them if needed. This fixes a problem with a new erratum added
in kernel 4.9.17 breaking brcm2708.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-03-26 19:20:33 +02:00
Hauke Mehrtens
fb7ea71c15 kernel: update kernel 4.9 to 4.9.17
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-03-26 12:23:19 +02:00
Hauke Mehrtens
88b125e9a4 kernel: update kernel 4.4 to 4.4.56
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-03-26 12:23:12 +02:00
Mathias Kresin
2f8d086baa kernel: add MIPS pci fix send upstream
Upstream commit 23dac14d058f ("MIPS: PCI: Use struct list_head lists")
changed the controller list from reverse to straight order without
taking care of the changed order for the scan of the recorded PCI
controllers.

Traverse the list in reverse order to restore the former behaviour.

This patches fixes the following PCI error on lantiq:

  pci 0000:01:00.0: BAR 0: error updating (0x1c000004 != 0x000000)

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-24 08:09:39 +01:00
Rafał Miłecki
cfc5b35dd4 kernel: disable DRM_HISI_KIRIN and USB_DWC3_OF_SIMPLE
They were triggering config prompts on brcm2710.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-03-22 14:22:35 +01:00
Rafał Miłecki
bf381f8f63 kernel: fix builds with kmod-drm-vc4 and CONFIG_SPI enabled
This fixes:
Samsung LD9040 RGB/SPI panel (DRM_PANEL_SAMSUNG_LD9040) [N/m] (NEW) aborted!

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-03-22 12:22:33 +01:00
Rafał Miłecki
61eeb21545 kernel: fix builds with kmod-drm-vc4 and kmod-backlight enabled
This fixes:
JDI LT070ME05000 WUXGA DSI panel (DRM_PANEL_JDI_LT070ME05000) [N/m/?] (NEW) aborted!

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-03-22 08:49:33 +01:00
Rafał Miłecki
fbf89732c4 brcm2708: add kmod-drm-vc4 package
It includes vc4 driver for Broadcom VideoCore IV GPU.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-03-21 23:44:24 +01:00
Rafał Miłecki
8fae77fc9b kernel: update bcma including recent changes for 4.12
This adds support for describing GPIO chips placed on PCIe cards. Thanks
to this we get working 2.4 GHz LED on Tenda AC9.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-03-21 09:58:05 +01:00
Rafał Miłecki
e41e1e6a2a kernel: move disabling DRM symbols to the config file
This is the standard way we handle this. Please note (it seems) I could
drop few symbols as they are hidden under (disabled) DRM_LEGACY now.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-03-21 08:22:56 +01:00
Rafał Miłecki
b4d5132a35 kernel: disable CONFIG_BCM_IPROC_ADC by default
This fixes compiling issue on bcm53xx target with kmod-iio-core:
Broadcom IPROC ADC driver (BCM_IPROC_ADC) [N/m/?] (NEW)

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-03-21 07:16:42 +01:00
Felix Fietkau
afc1675833 kernel: do not build modules.order
It is not needed for anything on the system and skipping this saves some
build time, especially in cases where there is nothing to do.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-03-16 19:14:24 +01:00
Felix Fietkau
6bada71e51 kernel: add missing config symbols for 4.9
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-03-16 11:29:03 +01:00
Jing Qiu
4475da968a kernel: Fix the incorrect i_nlink count after jffs2's RENAME_EXCHANGE operations.
The problem is caused by the incorrect handling of the parent inode's
i_nlink count for the dentry to be RENAME_EXCHANGED. There are 3 cases
to consider. Assume we want to RENAME_EXCHANGE struct dentry *a and
struct dentry *b, and inode_a is pointed to by dentry_a, inode_b is
pointed to by dentry_b:

1. If inode_a is a directory, but inode_b isn't, then we must decrease
   the i_nlink count of old_dir_i, and increase the i_nlink of new_dir_i.
2. If inode_a isn't a directory, but inode_b is a directory, then we
   must increase the i_nlink of old_dir_i, and decrease the i_nlink count
   of new_dir_i.
3. If the types of inode_a and inode_b are the same, we don't change the
   i_nlink for either old_dir_i or new_dir_i.

Signed-off-by: Jing Qiu <aqiu0720@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-03-16 11:28:40 +01:00
Felix Fietkau
772ec02a46 kernel: add missing config symbols for 4.9
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-03-14 13:28:04 +01:00
Hauke Mehrtens
31c6452107 kernel: update kernel 4.4 to 4.4.53
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-03-12 15:46:02 +01:00
Hauke Mehrtens
9a065fcfec kernel: update kernel 4.9 to 4.9.14
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-03-12 15:45:50 +01:00
Tim Harvey
08371a2db7 kernel: fix phy aneg crash
Fix a kernel crash caused when CONFIG_FIXED_PHY used for fixed phy drivers
in phy-add-aneg-done-function patch.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-12 11:58:45 +01:00
John Crispin
99d0633f24 kernel: add another missing TPM symbol
Signed-off-by: John Crispin <john@phrozen.org>
2017-03-11 08:27:10 +01:00
Rafał Miłecki
154b3a6863 kernel: backport first bcma 4.12 patch for GPIO and of_node
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-03-08 16:55:21 +01:00
Rafał Miłecki
318f2d6101 kernel: fix of_node handling in LEDs core code
This backports fixes for setting of_node and making it possible to read
extra info from DT. This was partially fixed by:
[PATCH] leds: leds-gpio: Set of_node for created LED devices
but it didn't work during initialization.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-03-08 13:06:16 +01:00
Felix Fietkau
2422f84b1b kernel: disable deprecated CONFIG_USB_EHCI_ATH79 symbol
USB_EHCI_HCD_PLATFORM is used instead

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-03-07 11:37:50 +01:00
Felix Fietkau
697ff33771 kernel: fix whiteout rename on ubifs (FS#579)
This was apparently caused by some linux upstream merge damage

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-03-06 10:12:42 +01:00
John Crispin
787cb58574 kernel: more tpm related symbols
Signed-off-by: John Crispin <john@phrozen.org>
2017-03-06 07:16:50 +01:00
Kevin Darbyshire-Bryant
f229f4af31 kernel: update kernel 4.4 to 4.4.52
Bump kernel from 4.4.50 to 4.4.52

Refresh patches

Compile tested all 4.4. targets

Run tested: ar71xx Archer C7 v2

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2017-03-03 18:17:47 +01:00
Rafał Miłecki
23bf153ead kernel: fix earlycon by keeping __earlycon_table
Somewhere between 4.4 and 4.9 there was a change that made
OF_EARLYCON_DECLARE adding entries to the __earlycon_table instead of
__earlycon_of_table. We need to keep this table as well.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-03-01 15:40:17 +01:00
Felix Fietkau
f9da6238e4 kernel: fix MIPS memory function optimization build error in decompressor
Fixes the following build error:
  CC      arch/mips/boot/compressed/decompress.o
  OBJCOPY arch/mips/boot/compressed/vmlinux.bin
  XZKERN  arch/mips/boot/compressed/vmlinux.bin.z
  OBJCOPY arch/mips/boot/compressed/piggy.o
  LD      vmlinuz
arch/mips/boot/compressed/decompress.o: In function `lzma2_lzma':
/tmp2/mehrtens/linux/arch/mips/boot/compressed/../../../../lib/xz/xz_dec_lzma2.c:884: undefined reference to `memmove'
make[1]: *** [vmlinuz] Error 1
make: *** [vmlinuz] Error 2

lib/decompress_unxz.c only defines its own memmove function if there is no
macro with the same name.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-28 20:22:10 +01:00
Jonas Gorski
a1a0f3f275 kernel: sort generic configs
Use kconfig.pl to sort the generic configs and get rid of duplicate
entries.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-02-28 11:49:35 +01:00
John Crispin
d49ddcdfd2 kernel: add another missing TPM symbol
Signed-off-by: John Crispin <john@phrozen.org>
2017-02-27 14:51:43 +01:00
Felix Fietkau
97212262d5 kernel: add missing TPM related config symbol for 3.18
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-27 14:51:52 +01:00
Felix Fietkau
4babc62dbd kernel: fix TPM related config symbols for 4.9
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-27 13:55:36 +01:00