Florian Fainelli
|
0f2e784408
|
Resync x86_64 kernel config and make uml build ext2 images by default
SVN-Revision: 8034
|
2007-07-18 13:01:32 +00:00 |
|
Florian Fainelli
|
c614e53d29
|
Upgrade uml to 2.6.22.1
SVN-Revision: 8033
|
2007-07-18 12:43:34 +00:00 |
|
Florian Fainelli
|
6c8cf15dae
|
Load the appropriate MTD driver if we were booted from NOR/NAND only, use the TRX mapping by default if bootloader unknown
SVN-Revision: 8032
|
2007-07-18 12:13:37 +00:00 |
|
Felix Fietkau
|
a52d2e2214
|
disable a few things that are not packaged yet
SVN-Revision: 8030
|
2007-07-18 12:02:17 +00:00 |
|
Felix Fietkau
|
8e42553971
|
dynamically enable/disable kernel config options for kmod packages based on build system config
SVN-Revision: 8026
|
2007-07-18 11:31:01 +00:00 |
|
Gabor Juhos
|
6e655daf21
|
restore support for Infineon's EASY 5120 boards
SVN-Revision: 8021
|
2007-07-17 15:43:58 +00:00 |
|
Florian Fainelli
|
0c0161849b
|
Preliminary support to bcm6358
SVN-Revision: 8020
|
2007-07-17 12:12:39 +00:00 |
|
Imre Kaloz
|
0d2746eb20
|
bump brcm63xx to 2.6.22.1, too
SVN-Revision: 8018
|
2007-07-17 10:54:08 +00:00 |
|
Florian Fainelli
|
e01a275ece
|
Add diagnostic stuff to rb500
SVN-Revision: 8016
|
2007-07-17 10:28:31 +00:00 |
|
Florian Fainelli
|
eb097e3068
|
Upgrade rb500 to .22.1, add the LED driver from #986
SVN-Revision: 8015
|
2007-07-17 10:25:18 +00:00 |
|
Florian Fainelli
|
e5520b8853
|
Add ipt_random module
SVN-Revision: 8014
|
2007-07-17 08:47:44 +00:00 |
|
Florian Fainelli
|
62e1634ed9
|
Adm5120 NAPI polling support and fixes by Thomas Langer and Friedrich Beckmann
SVN-Revision: 8013
|
2007-07-17 08:33:41 +00:00 |
|
Florian Fainelli
|
0e07409d92
|
Fix warnings
SVN-Revision: 8012
|
2007-07-17 08:32:29 +00:00 |
|
Felix Fietkau
|
e8918b0f66
|
better support for handling various jffs2 eraseblock sizes
SVN-Revision: 8011
|
2007-07-16 22:06:45 +00:00 |
|
Florian Fainelli
|
1473b7b5ea
|
Remove the bogus pciutils dependency
SVN-Revision: 8007
|
2007-07-16 18:18:20 +00:00 |
|
Felix Fietkau
|
e3a7ac074a
|
fix ipp2p
SVN-Revision: 8005
|
2007-07-16 16:07:32 +00:00 |
|
Felix Fietkau
|
6178152ee8
|
add kernel_oldconfig target
SVN-Revision: 8003
|
2007-07-16 10:03:03 +00:00 |
|
Rod Whitby
|
7b0a55127b
|
ixp4xx/fsg3: Enabled the Winbond W83782D sensor for Freecom FSG-3 temperature sensing and fan control
SVN-Revision: 7998
|
2007-07-16 05:37:50 +00:00 |
|
Felix Fietkau
|
56ac6f5bea
|
disable __must_check by default
SVN-Revision: 7996
|
2007-07-16 05:20:28 +00:00 |
|
Rod Whitby
|
7137c62c07
|
Set ixp4xx network config to static 192.168.1.1
SVN-Revision: 7995
|
2007-07-16 04:35:09 +00:00 |
|
Rod Whitby
|
a2740aaff6
|
ixp4xx/NSLU2: Added devio to the NSLU2 profile (required for reflashing the kernel)
SVN-Revision: 7994
|
2007-07-16 04:00:21 +00:00 |
|
Rod Whitby
|
10a1356827
|
ixp4xx-2.6: Removed the network config override file, cause we agreed that ixp4xx images should behave like all other openwrt images. So ixp4xx images are static 192.168.1.1 on lan now instead of dhcp.
SVN-Revision: 7991
|
2007-07-16 03:30:02 +00:00 |
|
Rod Whitby
|
81c3675f94
|
ixp4xx-2.6: Remove the inadequate netconfig script (which doesn't work on the only machines that it was meant to support), to allow ixp4xx images to behave like all other OpenWrt images
SVN-Revision: 7990
|
2007-07-16 03:26:40 +00:00 |
|
Rod Whitby
|
6d5c8233af
|
ixp4xx-2.6/config: Removed the disabling of swap so that the generic enabling of swap can come through
SVN-Revision: 7989
|
2007-07-16 03:22:50 +00:00 |
|
Gabor Juhos
|
81455651a2
|
fix of the board specific initialization of the GPIO pins
SVN-Revision: 7979
|
2007-07-15 19:01:19 +00:00 |
|
Gabor Juhos
|
1c6947c57b
|
refresh patches for 2.6.22.1 using quilt
SVN-Revision: 7976
|
2007-07-15 15:33:15 +00:00 |
|
Gabor Juhos
|
93a7dd0956
|
lzma-loader improvements * update LzmaDecode.[ch] to 4.16 * speed up decompressing from flash * uses printf from lzma-loader of generic-2.6 target * initial support for flash bank switching
SVN-Revision: 7975
|
2007-07-15 15:02:38 +00:00 |
|
Rod Whitby
|
57f4fc91ed
|
ixp4xx-2.6/config: Removed the PPP config override to allow PPP modules to be built
SVN-Revision: 7972
|
2007-07-13 22:23:09 +00:00 |
|
Gabor Juhos
|
54e329087c
|
flash driver shows the correct chip size from now
SVN-Revision: 7971
|
2007-07-13 16:15:10 +00:00 |
|
Florian Fainelli
|
e2b75c370e
|
Fix the section mismatch on the serial driver (#2076), thanks Thomas !
SVN-Revision: 7967
|
2007-07-13 13:14:08 +00:00 |
|
Imre Kaloz
|
d02260fcdc
|
sync avr32 to 2.6.22.atmel.2
SVN-Revision: 7962
|
2007-07-13 09:56:05 +00:00 |
|
Felix Fietkau
|
f82f62b992
|
fix layer7 for 2.6.21
SVN-Revision: 7951
|
2007-07-12 21:34:20 +00:00 |
|
Imre Kaloz
|
a92ca5e6b8
|
upgrade AVR32 to 2.6.22.1
SVN-Revision: 7945
|
2007-07-12 14:11:31 +00:00 |
|
Imre Kaloz
|
b35bedf094
|
pci_module_init() is deprecated for a long time - this won't hurt .21 and will be needed for .22
SVN-Revision: 7937
|
2007-07-12 10:29:54 +00:00 |
|
Imre Kaloz
|
d2c338cd52
|
upgrade atheros targets to 2.6.22.1
SVN-Revision: 7936
|
2007-07-12 10:19:36 +00:00 |
|
Gabor Juhos
|
b1d970fd1d
|
fix detection of admboot based boards
SVN-Revision: 7926
|
2007-07-11 19:26:20 +00:00 |
|
Gabor Juhos
|
a31921a8cd
|
remove hardware accelerated byte swapping feature, and resync kernel config
SVN-Revision: 7924
|
2007-07-11 15:21:17 +00:00 |
|
Rod Whitby
|
5ca2391456
|
ixp4xx: Add RTC driver for FSG-3
SVN-Revision: 7923
|
2007-07-11 14:16:09 +00:00 |
|
Rod Whitby
|
ffac90fdb7
|
ixp4xx/fsg3: Compile needed drivers into the kernel to allow for booting directly from internal hard disk.
SVN-Revision: 7921
|
2007-07-11 13:51:34 +00:00 |
|
Rod Whitby
|
ce7b825d9a
|
ixp4xx: Initial profile for the Freecom FSG-3
SVN-Revision: 7920
|
2007-07-11 13:29:57 +00:00 |
|
Rod Whitby
|
04673803b5
|
ixp4xx: Add initial support for the Freecom FSG-3
SVN-Revision: 7919
|
2007-07-11 13:16:14 +00:00 |
|
Rod Whitby
|
e51695f4d5
|
ixp4xx: Update from 2.6.21.5 to 2.6.21.6
SVN-Revision: 7918
|
2007-07-11 13:15:25 +00:00 |
|
Imre Kaloz
|
ec4086cab0
|
mostly cosmetic sync with the mainline bubinga code
SVN-Revision: 7917
|
2007-07-11 13:13:26 +00:00 |
|
Gabor Juhos
|
4db7fa1c06
|
refactor kernel code (part 1), mark it as broken now
SVN-Revision: 7916
|
2007-07-11 13:00:27 +00:00 |
|
Mike Baker
|
be6a41df04
|
bump to 2.6.22.1
SVN-Revision: 7915
|
2007-07-11 10:57:49 +00:00 |
|
Felix Fietkau
|
5123be41cd
|
add ar7 2.6.22 patches by matteo (work in progress, not booting yet)
SVN-Revision: 7914
|
2007-07-11 10:47:25 +00:00 |
|
Felix Fietkau
|
f82e310cd2
|
fix a typo in the imq module (patch from #2005)
SVN-Revision: 7908
|
2007-07-10 20:42:26 +00:00 |
|
Gabor Juhos
|
968894ad08
|
fix errors in image generation Makefiles, thanks to Thomas Langer (fixes #2060)
SVN-Revision: 7904
|
2007-07-10 11:02:07 +00:00 |
|
Gabor Juhos
|
0e1921ab3c
|
disable image generation for boards which we still have problems with (at least if CONFIG_DEVEL is not selected)
SVN-Revision: 7902
|
2007-07-09 16:36:19 +00:00 |
|
Florian Fainelli
|
c731d18905
|
au1000 now runs .22, mtx-1 watchdog is mainline and i2c patch is planned for rewriting
SVN-Revision: 7900
|
2007-07-09 16:06:43 +00:00 |
|