Commit graph

63 commits

Author SHA1 Message Date
Hauke Mehrtens
88f3c63572 kernel: update kernel 4.9 to version 4.9.40
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-07-28 22:46:17 +02:00
Mathias Kresin
e4e984f2a0 treewide: use only board_name function to get name
Do not parse /tmp/sysinfo/board_name, /proc/cpuinfo or the device tree
compatible string directly. Always use the board_name function to get
the board name.

The admswconfig package still reads /proc/cpuinfo directly. The code
looks somehow broken and the whole adm5120 which uses this package
looks unmaintained. Leave it as it is for now.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-07-15 23:13:34 +02:00
Mathias Kresin
e0b9ec8e96 treewide: drop target board_name functions
They are not used any longer.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-07-15 23:13:34 +02:00
Mathias Kresin
f12a32630f treewide: use the generic board_name function
Use the generic function instead ot the target specific ones.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-07-15 23:13:34 +02:00
Mathias Kresin
ac3e05c5d7 treewide: populate boardname and model earlier
For targets using the generic board detection and board specific
settings in diag.sh, the board name is still unset at the time the
set_state() provided by diag.sh is called by 10_indicate_preinit.

Change the execution order to ensure the boardname is populated before
required the first time. Do the target specific board detection as
early as possible, directly followed by the generic one to allow a
seamless switch to the generic function for populating /tmp/sysinfo/.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-07-15 23:13:34 +02:00
Koen Vandeputte
cd54b2d42b kernel: update kernel 4.9 to 4.9.37
- Refreshed all patches
- Removed upstreamed
- Adapted 4 patches:

473-fix-marvell-phy-initialization-issues.patch
-----------------------------------------------
Removed hunk 5 which got upstreamed

403-net-phy-avoid-setting-unsupported-EEE-advertisments.patch
404-net-phy-restart-phy-autonegotiation-after-EEE-advert.patch
--------------------------------------------------------------
Adapted these 2 RFC patches, merging the delta's from an upstream commit
(see below) which made it before these 2.

https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-
stable.git/commit/?h=v4.9.36&id=97ace183074d306942b903a148aebd5d061758f0

180-usb-xhci-add-support-for-performing-fake-doorbell.patch
-----------------------------------------------------------
- Moved fake_doorbell bitmask due to new item

Compile tested on: cns3xxx, imx6
Run tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2017-07-15 00:13:05 +02:00
Stijn Tintel
880f73c327 kernel: cleanup CONFIG_SCHED_HRTICK
Remove CONFIG_SCHED_HRTICK from target configs, as it was added to the
generic config in b47fd76563.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-06-29 04:46:59 +02:00
Koen Vandeputte
69649a1b45 kernel: update kernel 4.9 to 4.9.34
- Refreshed all patches
- Adapted 1 (0031-mtd-add-SMEM-parser-for-QCOM-platforms.patch)

Compile tested on: brcm2708, cns3xxx, imx6
Run tested on: brcm2708, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
[Compile and run tested on brcm2708]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-06-27 07:21:03 +02:00
Christian Lamparter
6adc757097 apm821xx: MR24: fix ethernet phy detection on the MR24
To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.
This patch fixes a problem where the AR8035 PHY can't be
detected on the Cisco Meraki MR24, when the ethernet cable
is not connected during boot.

Russell Senior reported:
|This appears to be a problem during probing of the AR8035
|phy chip. When ethernet has no link, the phy detection fails,
|and eth0 is not created. Plugging ethernet later has no effect,
|because there is no interface as far as the kernel is
|concerned. The relevant part of the boot log looks like this:
|
|[    0.876611] /plb/opb/emac-rgmii@ef601500: input 0 in RGMII mode
|[    0.882532] /plb/opb/ethernet@ef600c00: reset timeout
|[    0.888546] /plb/opb/ethernet@ef600c00: can't find PHY!
(<https://bugs.lede-project.org/index.php?do=details&task_id=687>)

Fixes FS#687
Cc: Chris Blake <chrisrblake93@gmail.com>
Reported-by: Russell Senior <russell@personaltelco.net>
Fixes: 23fbb5a87c56e98 ("emac: Fix EMAC soft reset on 460EX/GT")
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
2017-06-24 22:36:38 +02:00
Sergey Ryazanov
68e7a2a0b7 kernel: disable CONFIG_SG_POOL by default
CONFIG_SG_POOL symbol is selected only by CONFIG_SCSI, since the last
one is disabled by default then disable CONFIG_SG_POOL by default too.
And explicitly enable it only for platforms that use CONFIG_SCSI.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
2017-06-07 18:31:10 +02:00
Hauke Mehrtens
0b17375931 kernel: update kernel 4.9 to 4.9.30
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-05-27 00:48:37 +02:00
Koen Vandeputte
e842e16f45 kernel: update kernel 4.9 to 4.9.29
- Refresh all patches
- Removed upstreamed
- Adapted 1

Compile tested on: bcm53xx, cns3xxx, imx6, lantiq
Run tested on: cns3xxx & imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
[update from 4.9.28 to 4.9.29]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-05-21 21:51:22 +02:00
Chris Blake
8f43ba8c48 apm821xx: Merge the Cisco Meraki MX60 & MX60W
Both of these boards share the same DTS, and hardware. The only
difference would be the PCI-E slot, and ath9k card found on the MX60W.
Due to the similarities, it would be more efficient to merge these
profiles.

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2017-04-26 11:34:17 +02:00
Chris Blake
d1c3a9485a apm821xx: Add default packages to NAND target
This moves core router packages to the NAND target, to ensure they are
applied to all images. This change is being done due to an issue found
when flashing the MX60W image, which came without these when built as a
multi image.

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2017-04-26 11:34:14 +02:00
Christian Lamparter
cead8f9dfd apm821xx: remove 4.4 kernel support
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
2017-04-12 09:51:47 +02:00
Hauke Mehrtens
31c6452107 kernel: update kernel 4.4 to 4.4.53
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-03-12 15:46:02 +01:00
Felix Fietkau
9467ce42da build: get rid of host.mk
Defined required host related variables in toplevel.mk instead

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-26 13:31:44 +01:00
John Crispin
60a52cd4b4 apm821xx: adds missing symbol to v4.9 default config
Signed-off-by: John Crispin <john@phrozen.org>
2017-02-13 10:24:32 +01:00
Christian Lamparter
9a9f2f97e6 apm821xx: add linux 4.9 apm821xx patches
This patch updates the apm821xx target to use the 4.9 kernel.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
2017-02-11 20:57:56 +01:00
Joseph C. Lehner
7d00cfe9bb build: centralize fakeroot code
This patch moves the fakeroot code required by some devices to
`image-commands.mk`.

Create the fakeroot on the fly by using the undocumented -s (skip copy)
parameter of mkimage.

Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
[remove unused NETGEAR_KERNEL_MAGIC, remove workarounds to have a dummy
rootfs for mkimage]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-02-04 13:46:48 +01:00
Hauke Mehrtens
5b089e45a6 kernel: update 4.4 kernel to 4.4.42
Refresh patches on all 4.4 supported platforms.
Compile & run tested: lantiq/xrx200

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-01-13 23:05:36 +01:00
Felix Fietkau
87b668765e image: when using the new image build code, gzip ext4 images by default
This reduces the amount of hacks in the makefile code.

Remove the apm821xx code to do the same - it was broken and left both
compressed and uncompressed images in $(BIN_DIR)

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-13 16:59:28 +01:00
Felix Fietkau
018d80007e kernel: remove ubifs xz decompression support
It has been unused, and less useful than squashfs for cases where flash
space usage matters.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-09 14:07:06 +01:00
Kevin Darbyshire-Bryant
102cb4742c kernel: bump to 4.4.35
Refresh patches on all 4.4 supported platforms.

077-0005-bgmac-stop-clearing-DMA-receive-control-register-rig.patch
removed as now upstream.

Compile & run tested: ar71xx - Archer C7 v2

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2016-11-29 21:12:08 +01:00
Christian Lamparter
49856a4bb5 apm821xx: make it possible to update the dtb partition on the WNDR4700
Currently, the device-tree partition is marked as read-only.
Hence, userspace tools like mtd can't write into the partition.
This however will be necessary in case the DTB needs to be
updated.

This patch also adds the kernel.dtb image, so the compiled
DTB is exported as a file and available in the binary
directory along the firmware images.

Note: the u-boot does expects the dtb to be a uimage.

To update the dtb manually:
 1. copy the generated dtb to the router.
 2. mtd erase /dev/mtd2
 3. mtd write wndr4700.dtb /dev/mtd2

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-11-24 12:53:18 +01:00
Chris Blake
f478ec2007 apm821xx: Add support for the Cisco Meraki MX60/MX60W
This patch adds support for the Cisco Meraki MX60/MX60W Security
Appliance. Flashing information can be found at
https://github.com/riptidewave93/LEDE-MX60

Specs are as follows:
AppliedMicro APM82181 SoC at 800MHz
1GiB NAND - Samsung K9K8G08U0D
512MB DDR RAM - 4x Nanya NT5TU128M8GE-AC
Atheros AR8327-BL1A Gigabit Ethernet Switch
1x USB 2.0 Port

More info can be found at https://wiki.openwrt.org/toh/meraki/mx60

Cc: Christian Lamparter <chunkeey@gmail.com>

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2016-11-21 10:14:15 +01:00
Stijn Tintel
8e47655d4e kernel: update kernel 4.4 to version 4.4.32
Refresh patches for all targets that support kernel 4.4.
Compile-tested on all targets that use kernel 4.4 and aren't marked broken.
Runtime-tested on ar71xx, octeon.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2016-11-16 17:31:29 +01:00
Christian Lamparter
b9f609161d apm821xx: remove replaced netgear, wndr4700-usb dwc2 definiton
This special dwc2 device definition for the Netgear WNDR4700
has been replaced by amcc,usb-otg-405ex.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-11-12 21:04:15 +01:00
Christian Lamparter
ebaa82a2ca apm821xx: consolidate apm821xx device trees files
This patch moves the common SoC device tree entries
from the currently four supported platforms into a
common apm82181.dtsi.

Furthermore, this patch also changes the GPIO, IRQ and
input definitions of the supported platforms to use the
defined dt-bindings macros for GPIO_ACTIVE_LOW|HIGH,
KEY_WPS|RESTART|*, IRQ_TYPE_* when it's appropriate.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-11-12 21:04:15 +01:00
Christian Lamparter
3a112113e7 apm821xx: add amcc, usb-otg-405ex devicetree definition
This patch adds support for the amcc,usb-otg-405ex device
which is found in all APM82181 SoCs.
Note: The system can't use the generic "snps,dwc2" compatible
because of the special ahbcfg configuration. The default
GAHBCFG_HBSTLEN_INCR4 of snps,dwc2 can cause a system hang
when the USB and SATA is used concurrently.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-11-12 21:04:15 +01:00
Christian Lamparter
b5638bb64e apm821xx: redo WAN green and yellow LEDs
Because the WAN port is handled by the internal AR8327N switch, the
device should use swconfig_leds trigger to handle the link activity
of the WAN LED. This has the added bonus that the WAN LED will now
go dark if there's no ethernet cable connected to the WAN port.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-11-08 11:17:10 +01:00
Christian Lamparter
8f2c2f94cf apm821xx: add back end-of-UBI marker for the WNDR4700 and MR24
The patch "build: drop UBI EOF marker from images by default"
(commit d27bce8d28) removed the
end-of-UBI marker. Without this marker, the boards will panic
during boot:

[    1.683458] ubi0: attaching mtd4
[    1.696181] ubi0 warning: scan_peb: valid VID header but corrupted EC header at PEB 31
[    1.704367] ubi0 error: scan_peb: bad image sequence number 549886691 in PEB 32, expected 184585623
[    1.713377] Erase counter header dump:
[    1.717110]  magic          0x55424923
[    1.720843]  version        1
[    1.723797]  ec             0
[    1.726752]  vid_hdr_offset 512
[    1.729880]  data_offset    2048
[    1.733094]  image_seq      549886691
[    1.736740]  hdr_crc        0x92ba8130
[    1.740472] erase counter header hexdump:
[    1.744493] ubi0 error: ubi_attach_mtd_dev: failed to attach mtd4, error -22
[    1.751528] UBI error: cannot attach mtd4
[    1.755373] hctosys: unable to open rtc device (rtc0)
[    1.761130] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6
[    1.768604] Please append a correct "root=" boot option; here are the available partitions:
[...]
[    1.856992] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[    1.866519] Rebooting in 1 seconds..Auto calibration ---

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-11-04 11:11:34 +01:00
Rafał Miłecki
c9fdb23345 apm821xx: fix USB LED trigger for WNDR4700
The old usbdev trigger never supported assigning more than 1 USB port.
This code we got was never working as expected and it was missing 2 more
ports. Switch to usbport to have LED working with all ports.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Tested-by: Christian Lamparter <chunkeey@gmail.com>
2016-10-28 13:27:21 +02:00
Rafał Miłecki
0658527e1e switch to the new usbport LED trigger
This makes init.d script handle existing UCI entries using the new
trigger. It also switches all targets to use its package.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-10-19 12:09:45 +02:00
Christian Lamparter
4fc48a8cf2 apm821xx: replace recovery image for the MBL with initramfs
The patch "images: bump default rootfs size to 256 MB"
a1f83bad60 caused a crash
during boot for the recovery images. This is because
both variants of the MyBook Live only have 256MB of RAM
and for the recovery option, the ext4 rootfs was simply
stored in the RAMDISK.

This patch replaces recovery image for the MBL with an
initramfs kernel.

In order to boot the initramfs (for recovery or development):

0. copy the initramfs and device tree into tftp's server directory
   # cp *-initramfs-kernel.bin to /tftp-server/mbl.bin
   # cp *-ext4-kernel.dtb to /tftp-server/fdt.bin

1. Connect the MyBook Live (Duo) serial port.
   (Warning! Use a 3.3v level shifter).

2. Hit Enter during u-boot and insert these three lines:
   # setenv serverip 192.168.1.254; setenv ipaddr 192.168.1.1;
   # tftp ${kernel_addr_r} mbl.bin; tftp ${fdt_addr_r} fdt.bin
   # run addtty addmisc; bootm ${kernel_addr_r} - ${fdt_addr_r}

   Where 192.168.1.254 is your TFTP server.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-10-13 17:04:33 +02:00
Álvaro Fernández Rojas
d14c28fc80 kernel: update kernel 4.4 to version 4.4.20
Refresh patches for all targets that support kernel 4.4.
Compile-tested on brcm2708 only.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-09-15 08:10:55 +02:00
Mathias Kresin
a499d0a6b5 image: specify max image size in Kilobyte/Megabyte
Use the k and m unit suffix to be consistent with the blocksize.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-04 09:58:02 +02:00
Mathias Kresin
e7ec7a08aa image: use k as unit suffix for blocksize
Use k as unit suffix for kilobyte to have a the same unit regardless of
the used filesystem.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-04 08:56:05 +02:00
Mathias Kresin
d7b6f0ea88 apm821xx: image: add support for k unit suffix to boot-img
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-08 20:14:42 +02:00
Christian Lamparter
e9f86c6cac apm821xx: backport generic HDD led-triggers for WNDR4700 and MBL
This patch backports the new generic HDD/SDD led-trigger
from 4.8-rc1.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-09-08 13:40:03 +02:00
Christian Lamparter
f7c1d9c8a5 apm821xx: detect sd-card media changes for the WNDR4700
The insertion or removal of the sd-card cannot be detected
by the hardware itself. This is by design. To workaround this,
for the WNDR4700 unload/load the dwc2 module in case the
the special SD CARD GPIO line is low/high.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-09-08 13:40:02 +02:00
Christian Lamparter
78e63ce7e3 apm821xx: add size check for initramfs kernel for the Meraki MR24
Russell Senior reported an issue with the MR24 initramfs kernels:
> ## Booting kernel from Legacy Image at 00c10000 ...
>   Image Name:   POWERPC LEDE Linux-4.4.19
>   Created:      2016-08-31  11:57:05 UTC
>   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
>   Data Size:    2155723 Bytes = 2.1 MiB
>   Load Address: 00000000
>   Entry Point:  00000000
>   Verifying Checksum ... OK
>Wrong Ramdisk Image Format
>Ramdisk image is corrupt or invalid

For the MR24, the kernel is uploaded to 0x10000. The ramdisk starts
at 0x200000. This leaves the kernel with just 0x1f0000 bytes = 1984kb.
This patch adds a size check so the image creation script will abort
instead of producing a unbootable initramfs image. A separate patch
"apm821xx: Fix initramfs image for the Meraki MR24" which fixed the
reported issue was submitted earlier.

Cc: Russell Senior <russell@personaltelco.net>
Cc: Chris Blake <chrisrblake93@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-09-05 07:28:52 +02:00
riptidewave93
bc36678bdb apm821xx: Fix initramfs image for the Meraki MR24
When gzip is used, our kernel is too large and this causes the ramdisk
to be at the wrong offset. Fix by moving to lzma.

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2016-09-05 07:28:44 +02:00
Felix Fietkau
aa53f78038 build: fix subtarget descriptions
Move Target/Description above the target.mk include

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-04 13:35:11 +02:00
Stijn Tintel
8072264b96 kernel: update kernel 4.4 to version 4.4.19
Refresh patches for all targets that support kernel 4.4.
Compile-tested on all targets that use kernel 4.4 and aren't marked broken.
Runtime-tested on ar71xx, octeon and x86/64.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2016-08-23 10:51:17 +03:00
Jo-Philipp Wich
4d9fc1bd44 apm821xx: fix IB image building
Change the image build code to generate the DTB files as part of the kernel
build phase in order to fix the image build in the ImageBuilder environment.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-08-01 17:59:16 +02:00
Felix Fietkau
63b525dd6b image: add a helper variable for getting kernel/rootfs from within image Build/* templates
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-31 12:25:25 +02:00
Jo-Philipp Wich
db49dd894e build: rename sysupgrade-nand to sysupgrade-tar
Now that the "sysupgrade-nand" step is used by non-NAND targets as well,
rename it to "sysupgrade-tar" to make it more generic.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-07-29 16:53:03 +02:00
Felix Fietkau
119b4422f8 apm821xx: only attempt to mount /boot on MyBook Live
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-29 10:18:09 +02:00
Christian Lamparter
3f506bdbb0 apm821xx: fix atheros PCIe cards on the MR24
The consolidation of the MR24 and WNDR4700 subtargets
into the nand subtarget broke MR24's atheros wlan.
This was because the wndr4700's board code used a
pci_fixup routines to supply the ath9k module with
the calibration data.

This is not necessary on the MR24 as it has standard
mini-pcie ports. Hence the two AR9380 mini-pcie cards
do not need any calibration data overrides.

Cc: chrisrblake93@gmail.com
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-07-25 10:38:48 +02:00