KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
25080 commits 1 branch 0 tags 154 MiB
Commit graph

1311 commits

Author SHA1 Message Date
Hauke Mehrtens
09a55136d7 kernel: kmod-usb-serial-keyspan: fix dependencies 
This fixes the following error:
keyspan: Unknown symbol ezusb_fx1_ihex_firmware_download (err 0)

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37899
 2013-09-05 19:39:55 +00:00
Hauke Mehrtens
82a2969100 ath10k: enable Atheros 802.11ac driver 
This enables usage of the ath10k driver on OpenWrt. Only 2.0 PCI hardware
is supported. The ath10k firmware is currently only available
through github so use that as its source for now.

This goes build tested, not run time tested.

[Hauke: I did some minor changes]

Cc: ath10k@lists.infradead.org
Cc: Kalle Valo <kvalo@qca.qualcomm.com>
Cc: Kathy Giori <kgiori@qca.qualcomm.com>
Cc: Mathieu Olivari <mathieu@qca.qualcomm.com>
Cc: Jerome Proffit <jproffit@qca.qualcomm.com>
Cc: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Cc: Matthew McClintock <mmcclint@qca.qualcomm.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37898
 2013-09-05 19:35:14 +00:00
Gabor Juhos
b85c090177 package/rotary-gpio-custom: fix checkpatch errors module source 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37875
 2013-09-02 08:45:32 +00:00
Gabor Juhos
1928106d0d package/w1-gpio-custom: fix checkpatch errors in module source 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37874
 2013-09-02 08:45:31 +00:00
Gabor Juhos
f18a0d9547 package/i2c-gpio-custom: fix checkpatch errors in module source 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37873
 2013-09-02 08:45:30 +00:00
Gabor Juhos
6bb50e4df1 package/kernel: add spi-gpio-custom module 
The package makes it possible to create custom SPI
buses via GPIO lines.

This module is based on i2c-gpio-custom and allows to
configure an SPI bus via GPIO lines and expose it to
userspace without rebuilding the kernel. This is maily
intended to connect microcontrollers and other simple
SPI devices without making an ad-hoc kernel driver.

Signed-off-by: Marco Burato <zmaster.adsl@gmail.com>
[juhosg:
  - change subject,
  - extend and reformat commit message,
  - cleanup checkpatch errors/warnings in module source]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37872
 2013-09-02 08:45:29 +00:00
Steven Barth
0a85c59040 netfilter: Add IPv6-NAT support for kernel and ipt Thanks to Berni, Adam Novak and Sedat Dilek for patches and inspiration 
SVN-Revision: 37866
 2013-09-01 17:59:48 +00:00
Gabor Juhos
6c29525f42 mac80211: add a bunch of rt2x00 specific changes 
Backport some rt2x00 specific changes from
wireless-testing/master-2013-08-26 to add
support for RT3573 based devices.

Also refresh the rt2x00 specific patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37843
 2013-08-27 10:44:06 +00:00
Felix Fietkau
eaa8cb7834 mac80211: merge a few ad-hoc mode fixes 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37840
 2013-08-26 17:31:23 +00:00
Felix Fietkau
9cf157ac75 mac80211: disable CCK rates for 802.11n clients on brcmsmac to fix crash issues 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37839
 2013-08-26 17:31:15 +00:00
Luka Perkov
b04baf0d0c crypto: add missing depends for crypto-manager 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37817
 2013-08-21 00:36:19 +00:00
Hauke Mehrtens
2fc0c28345 broadcom-diag: remove BUFFALO_UNKNOWN 
This was itriggered by to many non buffalo devices

This closes #14043.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37804
 2013-08-17 13:43:07 +00:00
Hauke Mehrtens
e12b5ec8df broadcom-wl: Add 'N' mode support to broadcom-wl 
This is partly based on patches sent by Łukasz Kwestarz (See https://lists.openwrt.org/pipermail/openwrt-devel/2012-March/014356.html).

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37802
 2013-08-17 13:38:30 +00:00
Felix Fietkau
d03d3aa58c mac80211: merge upstream change to fix mesh rssi thresholds 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37793
 2013-08-15 13:57:11 +00:00
Felix Fietkau
bbf4412bee ath9k: merge a few more cleanups/fixes 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37767
 2013-08-13 10:35:18 +00:00
Felix Fietkau
253d2b511b ath9k: reorganize patches 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37766
 2013-08-13 10:35:14 +00:00
Felix Fietkau
ead5aa354c mac80211: merge upstream patch to suppress unnecessary ad-hoc mode scan with fixed-freq, fixed-bssid 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37764
 2013-08-13 10:35:04 +00:00
Luka Perkov
acb9bc0f5e kernel: remove imx-sdma-fw because of license issues 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37755
 2013-08-12 10:48:05 +00:00
Luka Perkov
556e850dfd kernel: add imx-sdma-fw package 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37753
 2013-08-11 15:10:42 +00:00
Felix Fietkau
fd586c0275 ath9k: fix an rx descriptor processing race condition 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37746
 2013-08-10 14:00:33 +00:00
Felix Fietkau
39ab281fae mac80211: Handle concurrent AP/STA beaconing properly 
Use the "start_disabled" option in hostapd that was added
in the earlier patch.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>

SVN-Revision: 37732
 2013-08-06 17:59:09 +00:00
Felix Fietkau
bdb2859a48 ath9k: fold the aggregation rework into 300-pending_work.patch (tracked as upstream submission) 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37716
 2013-08-06 10:31:10 +00:00
Felix Fietkau
5bce86faa2 mac80211: refresh a patch that was using the wrong patch style 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37715
 2013-08-06 10:31:06 +00:00
Felix Fietkau
48b3b74da7 mac80211: fold the rtlwifi patch into 300-pending_work.patch (upstream patch) 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37714
 2013-08-06 10:31:02 +00:00
Felix Fietkau
592f2c6e2b ath9k: add some more fixes for the tx queueing rework 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37713
 2013-08-06 10:30:58 +00:00
Hauke Mehrtens
3f351e2770 mac80211: rtlwifi depends on PCI or USB support in the Kconfig file 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37711
 2013-08-05 21:57:48 +00:00
Hauke Mehrtens
9d4145efe5 kernel: fix DMA error when BCM4331 is connected to BCM4706 
The BCM4331 supports a PCIe max request size of 512 bytes and uses
that, but the PCIe controller in the BCM4706 just supports 128 Bytes
and that causes a DMA error for packages bigger than 126 bytes. This
fixes the problem by setting the BCM4331 also to 128 Bytes.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37709
 2013-08-05 16:17:05 +00:00
Felix Fietkau
6743f2625b gpio-button-hotplug: debounce the initial button state, the first reads at boot time might be wrong 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37702
 2013-08-05 10:32:13 +00:00
Gabor Juhos
259c36358f mac80211: fix rt2x00 dependency 
The current dependency prevents building of the
rt2800{pci,usb} drivers for RT3883. Change the
dependency to fix this.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37699
 2013-08-05 09:24:19 +00:00
Gabor Juhos
885cf1f19f mac80211: rt2x00: fix LED polarity patch 
The patch causes compiler warning ...

  <...>/drivers/net/wireless/rt2x00/rt2800lib.c: In function 'rt2800_init_eeprom':
  <...>/drivers/net/wireless/rt2x00/rt2800lib.c:5971:2: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]

... and runtime errors on PCI/USB devices:

  [   11.810000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
  [   11.830000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0001 detected
  [   11.880000] rt2x00mmio_regbusy_read() Indirect register access failed: offset=0x00007010, value=0x01ff0001
  [   12.080000] usb 1-1: reset high-speed USB device number 2 using ehci-platform
  [   12.250000] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detecte
  [   12.300000] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 000f detected
  [   12.350000] ieee80211 phy1: rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0x1a93b47
  [   12.430000] ieee80211 phy1: rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0x11a93b47
  [   12.480000] ieee80211 phy1: rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0x11a93b47

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37698
 2013-08-05 09:09:41 +00:00
Gabor Juhos
3573494b19 mac80211: enable RT{33,35,53,55}XX chip support in rt2800usb 
Closes #13951.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37697
 2013-08-05 09:09:40 +00:00
Jonas Gorski
c7976ae5f8 mac80211: add rtlwifi drivers 
Signed-off-by: Viktar Palstsiuk <viktar.palstsiuk@promwad.com>
[jogo@openwrt.org: add missing DRIVER_11N_SUPPORT select, add missing
		   usb dependencies, backport upstream fixes for Kconfig
		   issues]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37687
 2013-08-04 15:32:36 +00:00
Hauke Mehrtens
2fcaba306e brcm47xx: change board detection for some Asus devices 
This closes #13316

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37680
 2013-08-04 12:36:13 +00:00
Hauke Mehrtens
0d9ecfa564 kernel: kmod-appletalk: fix dependencies 
When CONFIG_LLC gets build as a module, also p8022.ko and psnap.ko are
getting build as a module. kmod-appletalk depends on llc.ko and
psnap.ko, but at least psnap.ko,was not packed. On most systems
CONFIG_LLC will be build into the kernel so this problem does not show
up.

This fixes the missing dependency of kmod-appletalk on psnap.ko

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37673
 2013-08-04 09:51:07 +00:00
Hauke Mehrtens
7dea39fda2 broadcom-diag: show error message in case something goes wrong with gpio irq 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37668
 2013-08-03 17:12:07 +00:00
Hauke Mehrtens
309123bbfd broadcom-diag: add gpio config for Asus RT-N66U 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37667
 2013-08-03 17:10:37 +00:00
Hauke Mehrtens
b1b3067a12 broadcom-diag: add gpio config for Linksys E4200v1 
GPIO for Linksys E4200v1, tested and works. This closes #13454 and #13894

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37666
 2013-08-03 17:09:39 +00:00
Felix Fietkau
18e37d8caf gpio-button-hotplug: cleanup, fix compiler warning 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37665
 2013-08-03 11:56:27 +00:00
Felix Fietkau
4281026dda gpio-button-hotplug: fix active_low handling, possibly broken in r37643 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37664
 2013-08-03 11:49:50 +00:00
Hauke Mehrtens
d2ed54596d kernel: only add v4l2-compat-ioctl32 when CONFIG_COMPAT is set 
SVN-Revision: 37661
 2013-08-03 10:10:16 +00:00
Hauke Mehrtens
f43b6b2bea kernel: add missing module to video-core for kernel < 3.6 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37659
 2013-08-02 20:08:20 +00:00
Hauke Mehrtens
65ef965e6e kernel: fix usb-chipidea compilation with kernel <= 3.9 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37658
 2013-08-02 20:07:11 +00:00
Hauke Mehrtens
58274d68fb broadcom-diag: add support for the ASUS RT-N12 
This adds button and led info, which I determined
by manually poking the gpio values.

Signed-off-by: Josh Stone <cuviper@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37655
 2013-08-02 15:44:04 +00:00
Hauke Mehrtens
af970e66bf broadcom-diag: increase version number 
There are some changes in there and this should be rebuild.

SVN-Revision: 37654
 2013-08-02 15:06:14 +00:00
Felix Fietkau
1972a131a0 mac80211: backport a few upstream fixes 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37653
 2013-08-02 10:02:35 +00:00
Hauke Mehrtens
0fe808d032 kernel: load libphy before tg3 
SVN-Revision: 37651
 2013-08-01 22:19:19 +00:00
Hauke Mehrtens
2b55968f5d brcm47xx: improve detection of Linksys WRTSL54GS 
This closes #13319

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37647
 2013-08-01 19:33:59 +00:00
John Crispin
1eabf431df gpio-button-hotplug: use gpio_button_get_value() to initialize last_state. 
TL-WR720N-v3 has a slider switch composed of 2 GPIO buttons which can be
used to swtich between 3 positions.  At leat 1 button is in pressed state
in any of those positions.  Initialize 'last_state' as 0 (released) will
cause the device to automatically enter failsafe mode on every bootup.

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 37643
 2013-08-01 14:31:28 +00:00
John Crispin
ef96422920 gpio-button-hotplug: use gpio_button_get_value() to fetch state. 
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 37642
 2013-08-01 14:31:24 +00:00
John Crispin
2c19af6ac5 gpio-button-hotplug: add inline function gpio_button_get_value(). 
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 37641
 2013-08-01 14:31:20 +00:00