Jonas Gorski
43029544e2
brcm63xx: remove now obsolete board fixup code
...
Now that we migrated all users to dtb based detection, we can drop the
board fixup code.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42129
2014-08-11 11:37:26 +00:00
Jonas Gorski
74ec41ef59
brcm63xx: use dtb board detection for neufbox 4
...
This splits up neufbox 4 for now into two images, one for each OEM.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42128
2014-08-11 11:37:21 +00:00
Jonas Gorski
862f7fccb0
brcm63xx: use dtb board detection for NB6
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42127
2014-08-11 11:37:17 +00:00
Jonas Gorski
52b0935efe
brcm63xx: use dtb board detection for HW556
...
This requires individual images for each board version for now.
Linux partition was shrunk to ensure writing thewrong image won't
erase wifi calibration data.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42126
2014-08-11 11:37:14 +00:00
Jonas Gorski
0aa242fe20
brcm63xx: replace CFEFIXUP usage with dtb based detection
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42125
2014-08-11 11:37:09 +00:00
Jonas Gorski
f22bab1017
brcm63xx: move bcm96328avng to dtb detection
...
Use appended dtb for board detection for bcm96328avng.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42124
2014-08-11 11:37:04 +00:00
Jonas Gorski
9c6287d6a1
brcm63xx: add support for registering parallel flash through dtb
...
Add the required nodes to the dtsi files and code to prevent double
registration from the board support code.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42123
2014-08-11 11:37:01 +00:00
Jonas Gorski
79057c7255
brcm63xx: add helpers for building cfe images with dtb
...
Add a helper for building images with dtb appended kernels.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42122
2014-08-11 11:36:59 +00:00
Jonas Gorski
aa572fccb5
brcm63xx: add support for attaching dtbs to lzma kernels
...
In preparation for switching to dtb based board identification, add
support for building lzma-loader and lzma cfe kernels with dtb
appended.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42121
2014-08-11 11:36:55 +00:00
Jonas Gorski
0343c0288e
brcm63xx: add empty dtsi files for each of the supported SoCs
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42120
2014-08-11 11:36:53 +00:00
Jonas Gorski
de8e3f2f86
brcm63xx: add and enable support for loading an appended dtb
...
Allow appending a dtb blob to the binary and use it for identifying the
board. Fall back to nvram based identification in case of no dtb passed.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42119
2014-08-11 11:36:48 +00:00
Jonas Gorski
b61f57a5c7
brcm63xx: correctly export fallback sprom for brcm-wl
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 42118
2014-08-11 11:36:41 +00:00
Jonas Gorski
97d0ed4faa
brcm63xx: make board patch context less ambiguous
...
Make it less likely for quilt/patch to put boards into the "wrong"
section.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42117
2014-08-11 11:36:38 +00:00
Jonas Gorski
a06013e9b7
brcm63xx: fix board patches offsets
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo fix 553-boards_probe_switch.patch]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42116
2014-08-11 11:36:30 +00:00
Jonas Gorski
48318b52af
brcm63xx: Add fallback sprom for A4001N
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42110
2014-08-10 12:22:15 +00:00
Jonas Gorski
f30102c6c2
brcm63xx: Add fallback sprom for HG520v
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42109
2014-08-10 12:22:12 +00:00
Jonas Gorski
e07dc84b24
brcm63xx: Add fallback sprom for P870HW-51a
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42108
2014-08-10 12:22:10 +00:00
Jonas Gorski
568a15adb3
brcm63xx: Add fallback sprom for VR-3025un
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42107
2014-08-10 12:22:08 +00:00
Jonas Gorski
d3af37fdfb
brcm63xx: Add fallback sprom for VR-3025u
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42106
2014-08-10 12:22:05 +00:00
Jonas Gorski
6eb9375da4
brcm63xx: Add fallback sprom for WAP-5813n
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42105
2014-08-10 12:22:02 +00:00
Jonas Gorski
061f738087
brcm63xx: Add fallback sprom for AR-5381u
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42104
2014-08-10 12:21:59 +00:00
Jonas Gorski
23df30ca4a
brcm63xx: Add fallback sprom for AR-5387un
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42103
2014-08-10 12:21:55 +00:00
Jonas Gorski
d1f731866b
brcm63xx: Add fallback sprom for A4001N1
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42102
2014-08-10 12:21:52 +00:00
Jonas Gorski
312a7f9883
brcm63xx: Add fallback sprom for CT6373
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42101
2014-08-10 12:21:48 +00:00
Jonas Gorski
8240f6ad54
brcm63xx: Add fallback sprom for CT5365
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42100
2014-08-10 12:21:44 +00:00
Jonas Gorski
a299702df0
brcm63xx: Add fallback sprom for CT5361_CT5621
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42099
2014-08-10 12:21:39 +00:00
Jonas Gorski
a166e05188
brcm63xx: Add fallback sprom for Huawei HG553
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42098
2014-08-10 12:21:34 +00:00
Jonas Gorski
02e78b9bd8
brcm63xx: Fix fallback sprom il0mac
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42097
2014-08-10 12:21:30 +00:00
Luka Perkov
dd8d729096
kernel: update 3.14 to 3.14.16
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 42070
2014-08-08 13:38:22 +00:00
Jonas Gorski
930e3e7ca3
brcm63xx: add preliminary support for D-Link DSL-2751B E1
...
Mostly works except for USB led. Flashing not tested yet. Mostly
as an example for the sprom fixup code.
Fixup values taken from GPL tarball by comparing bcm43217_map.c
with the struct in sprom.c.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 41944
2014-08-01 21:56:46 +00:00
Jonas Gorski
76746026b3
brcm63xx: rework fallback sprom support
...
Rework fallback sprom support by providing different sproms for
different chips. Also make it optional to use.
This likely causes sprom fallback support to break on a few boards.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 41942
2014-08-01 21:56:38 +00:00
Jonas Gorski
faa51b307c
brcm63xx: switch to 3.14
...
Now that BB is branched off, we can now switch to 3.14 and start
breaking stuff again.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 41941
2014-08-01 21:56:35 +00:00
Jonas Gorski
701e2a38fe
brcm63xx: add working lzma-loader and use it for initramfs
...
Add a working lzma loader and use it for generating initramfs kernels
to allow easily netbooting elf kernels on devices with a 4 MiB CFE
size limit.
Based on ar71xx's lzma-loader.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 41940
2014-08-01 21:56:31 +00:00
Jonas Gorski
b723119385
brcm63xx: replace nvram_buf with a properly initialized array
...
Use an empty nvram_header to tell wl that there is no nvram buf.
wl else might try to allocate huge amount of memory because the
bcm63xx's nvram does not match the expected structure and contains
random values.
Fixes the following warning on load of wl:
[ 9.152000] WARNING: at mm/slab_common.c:377 kmalloc_slab+0x4c/0xc0()
[ 9.160000] Modules linked in: wl(P+) wl_glue ipv6 gpio_keys_polled input_polldev button_hotplug input_core
[ 9.168000] CPU: 0 PID: 366 Comm: kmodloader Tainted: P 3.10.49 #1
[ 9.176000] Stack : 00000000 00000000 00000000 00000000 8034b77a 00000042 81ac9af0 c02e0000
[ 9.176000] 8028bf70 802df31b 0000016e 8034af28 81ac9af0 c02e0000 c02e0000 81b39810
[ 9.176000] 0000002d 8002c9d4 00000003 8002a3c8 802937a0 c02e0000 8028e528 81ab398c
[ 9.176000] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 9.176000] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 81ab3918
[ 9.176000] ...
[ 9.212000] Call Trace:
[ 9.216000] [<800224b8>] show_stack+0x48/0x70
[ 9.220000] [<8002a538>] warn_slowpath_common+0x78/0xa8
[ 9.224000] [<8002a5f0>] warn_slowpath_null+0x18/0x24
[ 9.228000] [<8008145c>] kmalloc_slab+0x4c/0xc0
[ 9.236000] [<80097258>] __kmalloc+0x20/0x10c
[ 9.240000] [<80e23b90>] osl_malloc+0x24/0x6c [wl]
[ 9.244000] [<80e15288>] nvram_init+0x54/0x164 [wl]
[ 9.252000] [<80e08668>] si_pci_fixcfg+0x60c/0x9e8 [wl]
[ 9.256000]
[ 9.260000] ---[ end trace b5c4dbb046cf3c83 ]---
Reported-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 41861
2014-07-28 15:31:37 +00:00
Jonas Gorski
042fb8eb57
brcm63xx: 3.14: fix ath9k_pci_fixup
...
Since kernel commit 928bea964827 ("PCI: Delay enabling bridges until
they're needed"), pci fixups are run with bridges (e.g. the pcie port)
disabled.
This causses hangs when ath9k_pci_fixup tries to manually enable the
device to apply the register fixups.
Fix this by enabling any parent bridges before trying to access the
device itself.
Fixes boot on DSL-274XB rev F1.
Reported-by: Matteo Croce <matteo@openwrt.org>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 41856
2014-07-28 11:12:25 +00:00
Jonas Gorski
1cb1041c55
brcm63xx: Add support for ADB P.DG A4001N
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 41852
2014-07-27 17:44:59 +00:00
Jonas Gorski
3209fb968e
brcm63xx: Add support for Huawei HG520v
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 41851
2014-07-27 17:44:56 +00:00
Jonas Gorski
c27cb6e0fd
brcm63xx: Add support for ZyXEL P870HW-51a v2
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 41850
2014-07-27 17:44:53 +00:00
Jonas Gorski
b26139eb3f
brcm63xx: Add support for Comtrend VR-3025un
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 41848
2014-07-27 17:44:48 +00:00
Jonas Gorski
a669d2c528
brcm63xx: Add support for Comtrend VR-3025u
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 41847
2014-07-27 17:44:45 +00:00
John Crispin
ba63338d3f
kernel: update to 3.10.49 Signed-off-by: John Crispin <blogic@openwrt.org>
...
SVN-Revision: 41776
2014-07-20 17:31:11 +00:00
Jonas Gorski
2b6403722b
brcm63xx: update irq affinity code to latest version
...
Reduces code size a bit and sets affinity to boot cpu by default.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 41591
2014-07-12 12:31:47 +00:00
Jonas Gorski
ba9d2f397a
brcm63xx: base-files: order board names alphabetically
...
Restore alphatetical order in uci-defaults scripts and brcm63xx.sh
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 41590
2014-07-12 12:31:45 +00:00
Jonas Gorski
44e187fd66
brcm63xx: Use leds script for Huawei HG556a and improve profile
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 41589
2014-07-12 12:31:43 +00:00
Jonas Gorski
e5cadabb58
brcm63xx: Fix HW553 support
...
- adsl and lan leds are swapped.
- internetkey is labeled as hspa.
- enable status led and reset button for failsafe.
- use new leds script.
- fix switch configuration.
- remove enet0 from board_info.
- add profile.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 41588
2014-07-12 12:31:39 +00:00
Jonas Gorski
beb25f96eb
brcm63xx: Use model name for Comtrend AR-5381u
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 41587
2014-07-12 12:31:35 +00:00
Jonas Gorski
c9b2e96909
brcm63xx: Use model name for Comtrend AR-5387un
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 41586
2014-07-12 12:31:33 +00:00
Jonas Gorski
aee666d8f9
brcm63xx: Use model name for ADB P.DG A4001N1
...
This patch also makes use of the new leds script.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 41585
2014-07-12 12:31:30 +00:00
Jonas Gorski
8630d101b7
brcm63xx: fixup patches borked by allowing too much fuzz
...
Move defines and board_info structs back to their proper locations so
(de-)selecting SOC support won't break the build.
Reported-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 41550
2014-07-08 12:27:55 +00:00
Jonas Gorski
ffae660fbd
brcm63xx: disable AUDIT
...
Reduces kernel size by about 24k (6k compressed).
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 41506
2014-07-04 08:23:19 +00:00