add 3.6 kernel support
Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34622
This commit is contained in:
Florian Fainelli
parent
17c76e5ca8
commit
ff6116cbdf
4 changed files with 1516 additions and 0 deletions
194
target/linux/ep93xx/config-3.6
Normal file
194
target/linux/ep93xx/config-3.6
Normal file
|
|
@ -0,0 +1,194 @@
|
||||||
|
CONFIG_ALIGNMENT_TRAP=y
|
||||||
|
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
|
||||||
|
CONFIG_ARCH_EP93XX=y
|
||||||
|
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
|
||||||
|
CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
|
||||||
|
CONFIG_ARCH_NR_GPIO=0
|
||||||
|
CONFIG_ARCH_REQUIRE_GPIOLIB=y
|
||||||
|
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
|
||||||
|
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
|
||||||
|
CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
||||||
|
CONFIG_ARCH_USES_GETTIMEOFFSET=y
|
||||||
|
CONFIG_ARM=y
|
||||||
|
CONFIG_ARM_AMBA=y
|
||||||
|
# CONFIG_ARM_CPU_SUSPEND is not set
|
||||||
|
CONFIG_ARM_L1_CACHE_SHIFT=5
|
||||||
|
CONFIG_ARM_NR_BANKS=16
|
||||||
|
CONFIG_ARM_PATCH_PHYS_VIRT=y
|
||||||
|
# CONFIG_ARM_SP805_WATCHDOG is not set
|
||||||
|
CONFIG_ARM_THUMB=y
|
||||||
|
CONFIG_ARM_VIC=y
|
||||||
|
CONFIG_ARM_VIC_NR=2
|
||||||
|
# CONFIG_ARPD is not set
|
||||||
|
# CONFIG_BLK_DEV_INITRD is not set
|
||||||
|
# CONFIG_CACHE_L2X0 is not set
|
||||||
|
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
||||||
|
CONFIG_CLKDEV_LOOKUP=y
|
||||||
|
CONFIG_CMDLINE="console=ttyAM0,57600 init=/etc/preinit"
|
||||||
|
CONFIG_CMDLINE_FROM_BOOTLOADER=y
|
||||||
|
CONFIG_CONSOLE_TRANSLATIONS=y
|
||||||
|
CONFIG_CPU_32v4T=y
|
||||||
|
CONFIG_CPU_ABRT_EV4T=y
|
||||||
|
CONFIG_CPU_ARM920T=y
|
||||||
|
CONFIG_CPU_CACHE_V4WT=y
|
||||||
|
CONFIG_CPU_CACHE_VIVT=y
|
||||||
|
CONFIG_CPU_COPY_V4WB=y
|
||||||
|
CONFIG_CPU_CP15=y
|
||||||
|
CONFIG_CPU_CP15_MMU=y
|
||||||
|
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
|
||||||
|
# CONFIG_CPU_ICACHE_DISABLE is not set
|
||||||
|
CONFIG_CPU_PABRT_LEGACY=y
|
||||||
|
CONFIG_CPU_TLB_V4WBI=y
|
||||||
|
CONFIG_CPU_USE_DOMAINS=y
|
||||||
|
CONFIG_CRC7=y
|
||||||
|
CONFIG_CRC_ITU_T=y
|
||||||
|
CONFIG_CRUNCH=y
|
||||||
|
# CONFIG_DEBUG_USER is not set
|
||||||
|
CONFIG_DUMMY_CONSOLE=y
|
||||||
|
CONFIG_ELF_CORE=y
|
||||||
|
# CONFIG_ENABLE_WARN_DEPRECATED is not set
|
||||||
|
CONFIG_EP93XX_EARLY_UART1=y
|
||||||
|
# CONFIG_EP93XX_EARLY_UART2 is not set
|
||||||
|
# CONFIG_EP93XX_EARLY_UART3 is not set
|
||||||
|
CONFIG_EP93XX_ETH=y
|
||||||
|
# CONFIG_EP93XX_PWM is not set
|
||||||
|
CONFIG_EP93XX_SDCE0_PHYS_OFFSET=y
|
||||||
|
# CONFIG_EP93XX_SDCE1_PHYS_OFFSET is not set
|
||||||
|
# CONFIG_EP93XX_SDCE2_PHYS_OFFSET is not set
|
||||||
|
# CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET is not set
|
||||||
|
# CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET is not set
|
||||||
|
CONFIG_EP93XX_WATCHDOG=y
|
||||||
|
CONFIG_FONTS=y
|
||||||
|
# CONFIG_FONT_10x18 is not set
|
||||||
|
# CONFIG_FONT_6x11 is not set
|
||||||
|
# CONFIG_FONT_7x14 is not set
|
||||||
|
CONFIG_FONT_8x16=y
|
||||||
|
CONFIG_FONT_8x8=y
|
||||||
|
# CONFIG_FONT_ACORN_8x8 is not set
|
||||||
|
# CONFIG_FONT_MINI_4x6 is not set
|
||||||
|
# CONFIG_FONT_PEARL_8x8 is not set
|
||||||
|
# CONFIG_FONT_SUN12x22 is not set
|
||||||
|
# CONFIG_FONT_SUN8x16 is not set
|
||||||
|
CONFIG_FRAMEBUFFER_CONSOLE=y
|
||||||
|
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
|
||||||
|
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
|
||||||
|
CONFIG_FRAME_POINTER=y
|
||||||
|
# CONFIG_FW_LOADER is not set
|
||||||
|
CONFIG_GENERIC_ATOMIC64=y
|
||||||
|
CONFIG_GENERIC_BUG=y
|
||||||
|
CONFIG_GENERIC_GPIO=y
|
||||||
|
CONFIG_GENERIC_IRQ_SHOW=y
|
||||||
|
CONFIG_GENERIC_PCI_IOMAP=y
|
||||||
|
CONFIG_GPIOLIB=y
|
||||||
|
CONFIG_GPIO_EP93XX=y
|
||||||
|
CONFIG_GPIO_GENERIC=y
|
||||||
|
# CONFIG_GPIO_PL061 is not set
|
||||||
|
# CONFIG_HAMRADIO is not set
|
||||||
|
CONFIG_HARDIRQS_SW_RESEND=y
|
||||||
|
CONFIG_HAS_DMA=y
|
||||||
|
CONFIG_HAS_IOMEM=y
|
||||||
|
CONFIG_HAS_IOPORT=y
|
||||||
|
CONFIG_HAVE_AOUT=y
|
||||||
|
CONFIG_HAVE_ARCH_KGDB=y
|
||||||
|
CONFIG_HAVE_ARCH_PFN_VALID=y
|
||||||
|
CONFIG_HAVE_CLK=y
|
||||||
|
CONFIG_HAVE_C_RECORDMCOUNT=y
|
||||||
|
CONFIG_HAVE_DMA_API_DEBUG=y
|
||||||
|
CONFIG_HAVE_DYNAMIC_FTRACE=y
|
||||||
|
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
|
||||||
|
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
|
||||||
|
CONFIG_HAVE_FUNCTION_TRACER=y
|
||||||
|
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
|
||||||
|
CONFIG_HAVE_GENERIC_HARDIRQS=y
|
||||||
|
CONFIG_HAVE_IRQ_WORK=y
|
||||||
|
CONFIG_HAVE_KERNEL_GZIP=y
|
||||||
|
CONFIG_HAVE_KERNEL_LZMA=y
|
||||||
|
CONFIG_HAVE_KERNEL_LZO=y
|
||||||
|
CONFIG_HAVE_KERNEL_XZ=y
|
||||||
|
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
|
||||||
|
CONFIG_HAVE_MEMBLOCK=y
|
||||||
|
CONFIG_HAVE_OPROFILE=y
|
||||||
|
CONFIG_HAVE_PERF_EVENTS=y
|
||||||
|
CONFIG_HAVE_PROC_CPU=y
|
||||||
|
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
|
||||||
|
CONFIG_HAVE_SPARSE_IRQ=y
|
||||||
|
CONFIG_HW_CONSOLE=y
|
||||||
|
CONFIG_I2C=y
|
||||||
|
CONFIG_I2C_ALGOBIT=y
|
||||||
|
CONFIG_I2C_BOARDINFO=y
|
||||||
|
CONFIG_I2C_CHARDEV=y
|
||||||
|
CONFIG_IKCONFIG=y
|
||||||
|
CONFIG_IKCONFIG_PROC=y
|
||||||
|
CONFIG_INPUT=y
|
||||||
|
# CONFIG_INPUT_MISC is not set
|
||||||
|
CONFIG_INPUT_TOUCHSCREEN=y
|
||||||
|
CONFIG_IRQ_DOMAIN=y
|
||||||
|
CONFIG_KTIME_SCALAR=y
|
||||||
|
CONFIG_LOGO=y
|
||||||
|
CONFIG_LOGO_LINUX_CLUT224=y
|
||||||
|
CONFIG_LOGO_LINUX_MONO=y
|
||||||
|
CONFIG_LOGO_LINUX_VGA16=y
|
||||||
|
CONFIG_LOG_BUF_SHIFT=16
|
||||||
|
# CONFIG_MACH_EDB9302A is not set
|
||||||
|
# CONFIG_MACH_EDB9307A is not set
|
||||||
|
# CONFIG_MACH_EDB9315A is not set
|
||||||
|
CONFIG_MACH_SIM_ONE=y
|
||||||
|
# CONFIG_MACH_SNAPPER_CL15 is not set
|
||||||
|
# CONFIG_MACH_VISION_EP9307 is not set
|
||||||
|
# CONFIG_MFD_T7L66XB is not set
|
||||||
|
CONFIG_MMC=y
|
||||||
|
CONFIG_MMC_BLOCK=y
|
||||||
|
CONFIG_MMC_SPI=y
|
||||||
|
CONFIG_MODULE_FORCE_UNLOAD=y
|
||||||
|
CONFIG_MTD_CFI_ADV_OPTIONS=y
|
||||||
|
# CONFIG_MTD_CFI_GEOMETRY is not set
|
||||||
|
CONFIG_MTD_CFI_STAA=y
|
||||||
|
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
|
||||||
|
CONFIG_MTD_PHYSMAP=y
|
||||||
|
CONFIG_MTD_RAM=y
|
||||||
|
CONFIG_MULTI_IRQ_HANDLER=y
|
||||||
|
CONFIG_NEED_DMA_MAP_STATE=y
|
||||||
|
CONFIG_NEED_MACH_MEMORY_H=y
|
||||||
|
CONFIG_NEED_PER_CPU_KM=y
|
||||||
|
CONFIG_PAGEFLAGS_EXTENDED=y
|
||||||
|
CONFIG_PAGE_OFFSET=0xC0000000
|
||||||
|
# CONFIG_PCI_SYSCALL is not set
|
||||||
|
CONFIG_PERF_USE_VMALLOC=y
|
||||||
|
# CONFIG_PREEMPT_RCU is not set
|
||||||
|
# CONFIG_SCSI_DMA is not set
|
||||||
|
# CONFIG_SERIAL_8250 is not set
|
||||||
|
CONFIG_SERIAL_AMBA_PL010=y
|
||||||
|
CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
|
||||||
|
# CONFIG_SERIAL_AMBA_PL011 is not set
|
||||||
|
CONFIG_SPI=y
|
||||||
|
CONFIG_SPI_BITBANG=y
|
||||||
|
CONFIG_SPI_EP93XX=y
|
||||||
|
CONFIG_SPI_MASTER=y
|
||||||
|
CONFIG_SPLIT_PTLOCK_CPUS=999999
|
||||||
|
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
|
||||||
|
# CONFIG_TCP_CONG_ADVANCED is not set
|
||||||
|
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
|
||||||
|
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
|
||||||
|
# CONFIG_TOUCHSCREEN_BU21013 is not set
|
||||||
|
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
|
||||||
|
# CONFIG_TOUCHSCREEN_EGALAX is not set
|
||||||
|
# CONFIG_TOUCHSCREEN_EP93XX is not set
|
||||||
|
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
|
||||||
|
# CONFIG_TOUCHSCREEN_MAX11801 is not set
|
||||||
|
# CONFIG_TOUCHSCREEN_PIXCIR is not set
|
||||||
|
# CONFIG_TOUCHSCREEN_ST1232 is not set
|
||||||
|
# CONFIG_TOUCHSCREEN_TSC2005 is not set
|
||||||
|
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
|
||||||
|
CONFIG_UID16=y
|
||||||
|
# CONFIG_USB_ARCH_HAS_EHCI is not set
|
||||||
|
# CONFIG_USB_ARCH_HAS_XHCI is not set
|
||||||
|
CONFIG_USB_SUPPORT=y
|
||||||
|
CONFIG_VECTORS_BASE=0xffff0000
|
||||||
|
CONFIG_VIDEO_OUTPUT_CONTROL=y
|
||||||
|
CONFIG_VM_EVENT_COUNTERS=y
|
||||||
|
CONFIG_VT=y
|
||||||
|
CONFIG_VT_CONSOLE=y
|
||||||
|
# CONFIG_VT_HW_CONSOLE_BINDING is not set
|
||||||
|
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||||
|
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||||
|
CONFIG_ZONE_DMA_FLAG=0
|
||||||
70
target/linux/ep93xx/patches-3.6/001-ep93xx_cpuinfo.patch
Normal file
70
target/linux/ep93xx/patches-3.6/001-ep93xx_cpuinfo.patch
Normal file
|
|
@ -0,0 +1,70 @@
|
||||||
|
This patch puts the EP93xx chip revision and unique ID into /proc/cpuinfo.
|
||||||
|
This is necessary to be able to set a unique MAC address for DHCP purposes
|
||||||
|
by adding a line to /etc/network/interfaces:
|
||||||
|
|
||||||
|
# Generate a unique locally-assigned MAC address from the CPU serial number
|
||||||
|
pre-up ifconfig eth0 hw ether `sed -n 's/^Serial.* 000000/02/p' /proc/cpuinfo`
|
||||||
|
|
||||||
|
It uses the chip revision reading code in the ep93xx-chip-revision patch.
|
||||||
|
|
||||||
|
Really, this is wrong, since /proc/cpuinfo should report the revision and
|
||||||
|
serial number of the ARM920T processor, while these are the rev and serial
|
||||||
|
of the EP93xx SoC. In a future kernel (>2.6.34) there may be a new file
|
||||||
|
/proc/socinfo for this information.
|
||||||
|
|
||||||
|
-martinwguy 14 May 2010
|
||||||
|
|
||||||
|
--- a/arch/arm/kernel/setup.c
|
||||||
|
+++ b/arch/arm/kernel/setup.c
|
||||||
|
@@ -56,6 +56,12 @@
|
||||||
|
#include <asm/unwind.h>
|
||||||
|
#include <asm/memblock.h>
|
||||||
|
|
||||||
|
+#if defined(CONFIG_ARCH_EP93XX)
|
||||||
|
+#include <asm/io.h>
|
||||||
|
+#include <mach/platform.h>
|
||||||
|
+#include <mach/ep93xx-regs.h>
|
||||||
|
+#endif
|
||||||
|
+
|
||||||
|
#if defined(CONFIG_DEPRECATED_PARAM_STRUCT)
|
||||||
|
#include "compat.h"
|
||||||
|
#endif
|
||||||
|
@@ -1107,9 +1113,16 @@ static int c_show(struct seq_file *m, vo
|
||||||
|
seq_puts(m, "\n");
|
||||||
|
|
||||||
|
seq_printf(m, "Hardware\t: %s\n", machine_name);
|
||||||
|
+#if defined(CONFIG_ARCH_EP93XX)
|
||||||
|
+ seq_printf(m, "Revision\t: %04x\n",
|
||||||
|
+ ep93xx_chip_revision());
|
||||||
|
+ seq_printf(m, "Serial\t\t: %016x\n",
|
||||||
|
+ *((unsigned int *)EP93XX_SECURITY_UNIQID));
|
||||||
|
+#else
|
||||||
|
seq_printf(m, "Revision\t: %04x\n", system_rev);
|
||||||
|
seq_printf(m, "Serial\t\t: %08x%08x\n",
|
||||||
|
system_serial_high, system_serial_low);
|
||||||
|
+#endif
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
--- a/arch/arm/mach-ep93xx/soc.h
|
||||||
|
+++ b/arch/arm/mach-ep93xx/soc.h
|
||||||
|
@@ -82,8 +82,6 @@
|
||||||
|
#define EP93XX_I2S_PHYS_BASE EP93XX_APB_PHYS(0x00020000)
|
||||||
|
#define EP93XX_I2S_BASE EP93XX_APB_IOMEM(0x00020000)
|
||||||
|
|
||||||
|
-#define EP93XX_SECURITY_BASE EP93XX_APB_IOMEM(0x00030000)
|
||||||
|
-
|
||||||
|
#define EP93XX_AAC_PHYS_BASE EP93XX_APB_PHYS(0x00080000)
|
||||||
|
#define EP93XX_AAC_BASE EP93XX_APB_IOMEM(0x00080000)
|
||||||
|
|
||||||
|
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
|
||||||
|
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
|
||||||
|
@@ -38,4 +38,8 @@
|
||||||
|
#define EP93XX_UART3_PHYS_BASE EP93XX_APB_PHYS(0x000e0000)
|
||||||
|
#define EP93XX_UART3_BASE EP93XX_APB_IOMEM(0x000e0000)
|
||||||
|
|
||||||
|
+#define EP93XX_SECURITY_BASE EP93XX_APB_IOMEM(0x00030000)
|
||||||
|
+#define EP93XX_SECURITY_REG(x) (EP93XX_SECURITY_BASE + (x))
|
||||||
|
+#define EP93XX_SECURITY_UNIQID EP93XX_SECURITY_REG(0x2440)
|
||||||
|
+
|
||||||
|
#endif
|
||||||
1072
target/linux/ep93xx/patches-3.6/003-ep93xx_touchscreen.patch
Normal file
1072
target/linux/ep93xx/patches-3.6/003-ep93xx_touchscreen.patch
Normal file
File diff suppressed because it is too large
Load diff
180
target/linux/ep93xx/patches-3.6/004-simone_add_mmc_spi.patch
Normal file
180
target/linux/ep93xx/patches-3.6/004-simone_add_mmc_spi.patch
Normal file
|
|
@ -0,0 +1,180 @@
|
||||||
|
This enables the mmc-over-spi driver for the Sim.One board, based on Mika's
|
||||||
|
patch, which used a GPIO for chip select in stead of the default SFRMOUT pin.
|
||||||
|
I've modified it to use the usual SFRMOUT; if you've modified your Sim.One
|
||||||
|
board to use a GPIO instead, uncomment and modify
|
||||||
|
// #define MMC_CHIP_SELECT_GPIO EP93XX_GPIO_LINE_EGPIO15
|
||||||
|
in the source file.
|
||||||
|
-martinwguy, 14 May 2010
|
||||||
|
|
||||||
|
From: Mika Westerberg <mika.westerberg@iki.fi>
|
||||||
|
Date: Wed, 28 Apr 2010 08:42:46 +0300
|
||||||
|
Subject: [PATCH] ep93xx: simone: added board specific SPI support for MMC/SD cards
|
||||||
|
|
||||||
|
This includes setting up EGPIOs 0 and 9 for card detection and chip select
|
||||||
|
respectively.
|
||||||
|
|
||||||
|
--- a/arch/arm/mach-ep93xx/simone.c
|
||||||
|
+++ b/arch/arm/mach-ep93xx/simone.c
|
||||||
|
@@ -18,12 +18,17 @@
|
||||||
|
#include <linux/kernel.h>
|
||||||
|
#include <linux/init.h>
|
||||||
|
#include <linux/platform_device.h>
|
||||||
|
+#include <linux/gpio.h>
|
||||||
|
#include <linux/i2c.h>
|
||||||
|
#include <linux/i2c-gpio.h>
|
||||||
|
+#include <linux/mmc/host.h>
|
||||||
|
+#include <linux/spi/spi.h>
|
||||||
|
+#include <linux/spi/mmc_spi.h>
|
||||||
|
|
||||||
|
#include <mach/hardware.h>
|
||||||
|
#include <mach/fb.h>
|
||||||
|
#include <mach/gpio-ep93xx.h>
|
||||||
|
+#include <mach/ep93xx_spi.h>
|
||||||
|
|
||||||
|
#include <asm/hardware/vic.h>
|
||||||
|
#include <asm/mach-types.h>
|
||||||
|
@@ -41,6 +46,135 @@ static struct ep93xxfb_mach_info __initd
|
||||||
|
.flags = EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
|
||||||
|
};
|
||||||
|
|
||||||
|
+/*
|
||||||
|
+ * GPIO lines used for MMC card detection.
|
||||||
|
+ */
|
||||||
|
+#define MMC_CARD_DETECT_GPIO EP93XX_GPIO_LINE_EGPIO0
|
||||||
|
+
|
||||||
|
+/*
|
||||||
|
+ * If you have hacked your Sim.One to use a GPIO as SD card chip select
|
||||||
|
+ * (SD pin 1), uncomment the following line.
|
||||||
|
+ * The example, EGPIO15, is on TP17 near the CPU.
|
||||||
|
+ */
|
||||||
|
+// #define MMC_CHIP_SELECT_GPIO EP93XX_GPIO_LINE_EGPIO15
|
||||||
|
+
|
||||||
|
+/*
|
||||||
|
+ * MMC SPI chip select GPIO handling. If you are using SFRMOUT (SFRM1) signal,
|
||||||
|
+ * you can leave these empty and pass NULL as .controller_data.
|
||||||
|
+ */
|
||||||
|
+
|
||||||
|
+#ifdef MMC_CHIP_SELECT_GPIO
|
||||||
|
+static int simone_mmc_spi_setup(struct spi_device *spi)
|
||||||
|
+{
|
||||||
|
+ unsigned int gpio = MMC_CHIP_SELECT_GPIO;
|
||||||
|
+ int err;
|
||||||
|
+
|
||||||
|
+ err = gpio_request(gpio, spi->modalias);
|
||||||
|
+ if (err)
|
||||||
|
+ return err;
|
||||||
|
+
|
||||||
|
+ err = gpio_direction_output(gpio, 1);
|
||||||
|
+ if (err) {
|
||||||
|
+ gpio_free(gpio);
|
||||||
|
+ return err;
|
||||||
|
+ }
|
||||||
|
+
|
||||||
|
+ return 0;
|
||||||
|
+}
|
||||||
|
+
|
||||||
|
+static void simone_mmc_spi_cleanup(struct spi_device *spi)
|
||||||
|
+{
|
||||||
|
+ unsigned int gpio = MMC_CHIP_SELECT_GPIO;
|
||||||
|
+
|
||||||
|
+ gpio_set_value(gpio, 1);
|
||||||
|
+ gpio_direction_input(gpio);
|
||||||
|
+ gpio_free(gpio);
|
||||||
|
+}
|
||||||
|
+
|
||||||
|
+static void simone_mmc_spi_cs_control(struct spi_device *spi, int value)
|
||||||
|
+{
|
||||||
|
+ gpio_set_value(MMC_CHIP_SELECT_GPIO, value);
|
||||||
|
+}
|
||||||
|
+
|
||||||
|
+static struct ep93xx_spi_chip_ops simone_mmc_spi_ops = {
|
||||||
|
+ .setup = simone_mmc_spi_setup,
|
||||||
|
+ .cleanup = simone_mmc_spi_cleanup,
|
||||||
|
+ .cs_control = simone_mmc_spi_cs_control,
|
||||||
|
+};
|
||||||
|
+#endif
|
||||||
|
+
|
||||||
|
+/*
|
||||||
|
+ * MMC card detection GPIO setup.
|
||||||
|
+ */
|
||||||
|
+static int simone_mmc_spi_init(struct device *dev,
|
||||||
|
+ irqreturn_t (*irq_handler)(int, void *), void *mmc)
|
||||||
|
+{
|
||||||
|
+ unsigned int gpio = MMC_CARD_DETECT_GPIO;
|
||||||
|
+ int irq, err;
|
||||||
|
+
|
||||||
|
+ err = gpio_request(gpio, dev_name(dev));
|
||||||
|
+ if (err)
|
||||||
|
+ return err;
|
||||||
|
+
|
||||||
|
+ err = gpio_direction_input(gpio);
|
||||||
|
+ if (err)
|
||||||
|
+ goto fail;
|
||||||
|
+
|
||||||
|
+ irq = gpio_to_irq(gpio);
|
||||||
|
+ if (irq < 0)
|
||||||
|
+ goto fail;
|
||||||
|
+
|
||||||
|
+ err = request_irq(irq, irq_handler, IRQF_TRIGGER_FALLING,
|
||||||
|
+ "MMC card detect", mmc);
|
||||||
|
+ if (err)
|
||||||
|
+ goto fail;
|
||||||
|
+
|
||||||
|
+ printk(KERN_INFO "%s: using irq %d for MMC card detection\n",
|
||||||
|
+ dev_name(dev), irq);
|
||||||
|
+
|
||||||
|
+ return 0;
|
||||||
|
+fail:
|
||||||
|
+ gpio_free(gpio);
|
||||||
|
+ return err;
|
||||||
|
+}
|
||||||
|
+
|
||||||
|
+static void simone_mmc_spi_exit(struct device *dev, void *mmc)
|
||||||
|
+{
|
||||||
|
+ unsigned int gpio = MMC_CARD_DETECT_GPIO;
|
||||||
|
+
|
||||||
|
+ free_irq(gpio_to_irq(gpio), mmc);
|
||||||
|
+ gpio_free(gpio);
|
||||||
|
+}
|
||||||
|
+
|
||||||
|
+static struct mmc_spi_platform_data simone_mmc_spi_data = {
|
||||||
|
+ .init = simone_mmc_spi_init,
|
||||||
|
+ .exit = simone_mmc_spi_exit,
|
||||||
|
+ .detect_delay = 500,
|
||||||
|
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+static struct spi_board_info simone_spi_devices[] __initdata = {
|
||||||
|
+ {
|
||||||
|
+ .modalias = "mmc_spi",
|
||||||
|
+#ifdef MMC_CHIP_SELECT_GPIO
|
||||||
|
+ .controller_data = &simone_mmc_spi_ops,
|
||||||
|
+#endif
|
||||||
|
+ .platform_data = &simone_mmc_spi_data,
|
||||||
|
+ /*
|
||||||
|
+ * We use 10 MHz even though the maximum is 3.7 MHz. The driver
|
||||||
|
+ * will limit it automatically to max. frequency.
|
||||||
|
+ */
|
||||||
|
+ .max_speed_hz = 10 * 1000 * 1000,
|
||||||
|
+ .bus_num = 0,
|
||||||
|
+ .chip_select = 0,
|
||||||
|
+ .mode = SPI_MODE_3,
|
||||||
|
+ },
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+static struct ep93xx_spi_info simone_spi_info __initdata = {
|
||||||
|
+ .num_chipselect = ARRAY_SIZE(simone_spi_devices),
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
static struct i2c_gpio_platform_data __initdata simone_i2c_gpio_data = {
|
||||||
|
.sda_pin = EP93XX_GPIO_LINE_EEDAT,
|
||||||
|
.sda_is_open_drain = 0,
|
||||||
|
@@ -75,6 +209,8 @@ static void __init simone_init_machine(v
|
||||||
|
ep93xx_register_fb(&simone_fb_info);
|
||||||
|
ep93xx_register_i2c(&simone_i2c_gpio_data, simone_i2c_board_info,
|
||||||
|
ARRAY_SIZE(simone_i2c_board_info));
|
||||||
|
+ ep93xx_register_spi(&simone_spi_info, simone_spi_devices,
|
||||||
|
+ ARRAY_SIZE(simone_spi_devices));
|
||||||
|
simone_register_audio();
|
||||||
|
}
|
||||||
|
|
||||||
Loading…
Reference in a new issue