ramips: add support for ZBT-WE1326

Specification:
- SoC: MT7621AT, MT7603EN and MT7612EN
- Flash: 16 MiB (W25Q128FVSG)
- RAM: 512 MiB (EM6GE16EWXD-12H)
- Ethernet: 1 x WAN (10/100/1000Mbps) and 4 x LAN (10/100/1000 Mbps)
- Others: USB 2.0, micro SD slot, reset button and 8 x LEDs

Issues:
- Two LEDs for 2.4 GHz and 5 GHz Wi-Fi do not work, can't find GPIOs.
- The pwr LED is not GPIO controllable

How to install:
- The original firmware is OpenWrt, so both LuCI or sysupgrade can be used.
- Do not keep settings, for sysupgrade please use the -n option.

Signed-off-by: Jiawei Wang <buaawjw@gmail.com>
This commit is contained in:
Jiawei Wang 2017-04-20 11:07:26 +08:00 committed by Mathias Kresin
parent 187624f759
commit ff258effd5
5 changed files with 120 additions and 0 deletions

View file

@ -112,6 +112,7 @@ ramips_setup_interfaces()
y1|\
youku-yk1|\
zbt-ape522ii|\
zbt-we1326|\
zbt-we826|\
zbt-wg2626|\
zbt-wg3526|\

View file

@ -649,6 +649,9 @@ ramips_board_detect() {
*"ZBT-WA05")
name="zbt-wa05"
;;
*"ZBT-WE1326")
name="zbt-we1326"
;;
*"ZBT-WE2026")
name="zbt-we2026"
;;

View file

@ -192,6 +192,7 @@ platform_check_image() {
zbt-ape522ii|\
zbt-cpe102|\
zbt-wa05|\
zbt-we1326|\
zbt-we2026|\
zbt-we826|\
zbt-wg2626|\

View file

@ -0,0 +1,107 @@
/dts-v1/;
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "ZBT-WE1326";
chosen {
bootargs = "console=ttyS0,115200";
};
memory@0 {
device_type = "memory";
reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "wdt";
ralink,function = "gpio";
};
};
};
&spi0 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
m25p,chunked-io = <32>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0xfb0000>;
};
};
};
&ethernet {
mtd-mac-address = <&factory 0xe000>;
};
&pcie {
status = "okay";
pcie0 {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
device_type = "pci";
mediatek,mtd-eeprom = <&factory 0x8000>;
ieee80211-freq-limit = <5000000 6000000>;
};
};
pcie1 {
mt76@1,0 {
reg = <0x0000 0 0 0 0>;
device_type = "pci";
mediatek,mtd-eeprom = <&factory 0x0000>;
ieee80211-freq-limit = <2400000 2500000>;
};
};
};
&sdhci {
status = "okay";
};

View file

@ -245,6 +245,14 @@ define Device/wsr-600
endef
TARGET_DEVICES += wsr-600
define Device/zbt-we1326
DTS := ZBT-WE1326
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := ZBT WE1326
DEVICE_PACKAGES := kmod-usb3 kmod-sdhci-mt7620
endef
TARGET_DEVICES += zbt-we1326
define Device/zbt-wg2626
DTS := ZBT-WG2626
IMAGE_SIZE := $(ralink_default_fw_size_16M)