KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

ath79: initial gl-ar300m support

Browse source 
Signed-off-by: Marty E. Plummer <hanetzer@startmail.com>
This commit is contained in:
Marty E. Plummer 2018-05-27 00:37:22 -05:00 committed by John Crispin
parent 142477e751
commit fe3b62bbdc
5 changed files with 436 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

5
target/linux/ath79/base-files/etc/board.d/02_network
View file

@ -28,6 +28,11 @@ ath79_setup_interfaces()
"glinet,ar150")
ucidef_set_interfaces_lan_wan "eth1" "eth0"
;;
"glinet,ar300m")
ucidef_set_interfaces_lan_wan "eth1" "eth0"
;;
"tplink,tl-mr3020-v1")
ucidef_set_interface_lan "eth0.1"
ucidef_add_switch "switch0" "0@eth0" "1:lan"

235
target/linux/ath79/dts/qca9533.dtsi Normal file
View file

@ -0,0 +1,235 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include <dt-bindings/clock/ath79-clk.h>
#include "ath79.dtsi"
/ {
compatible = "qca,qca9533";
#address-cells = <1>;
#size-cells = <1>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "mips,mips24Kc";
clocks = <&pll ATH79_CLK_CPU>;
reg = <0>;
};
};
ref: ref {
compatible = "fixed-clock";
#clock-cells = <0>;
};
ahb {
apb {
ddr_ctrl: memory-controller@18000000 {
compatible = "qca,ar9530-ddr-controller",
"qca,ar7240-ddr-controller";
reg = <0x18000000 0x128>;
#qca,ddr-wb-channel-cells = <1>;
};
uart: uart@18020000 {
compatible = "ns16550a";
reg = <0x18020000 0x20>;
interrupts = <3>;
clocks = <&pll ATH79_CLK_REF>;
clock-names = "uart";
reg-io-width = <4>;
reg-shift = <2>;
no-loopback-test;
status = "disabled";
};
usb_phy: usb-phy@18030000 {
compatible = "qca,ar7200-usb-phy";
reg = <0x18030000 0x100>;
#phy-cells = <0>;
reset-names = "usb-phy", "usb-suspend-override";
resets = <&rst 4>, <&rst 3>;
status = "disabled";
};
gpio: gpio@18040000 {
compatible = "qca,ar9530-gpio",
"qca,ar9340-gpio";
reg = <0x18040000 0x28>;
interrupts = <2>;
ngpios = <20>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
pinmux: pinmux@1804002c {
compatible = "pinctrl-single";
reg = <0x1804002c 0x48>;
#size-cells = <0>;
pinctrl-single,bit-per-mux;
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask = <0x1>;
#pinctrl-cells = <2>;
jtag_disable_pins: pinmux_jtag_disable_pins {
pinctrl-single,bits = <
0x40 0x2 0x2
>;
};
};
pll: pll-controller@18050000 {
compatible = "qca,qca9530-pll", "syscon";
reg = <0x18050000 0x48>;
#clock-cells = <1>;
clocks = <&ref>;
clock-names = "ref";
clock-output-names = "cpu", "ddr", "ahb";
};
wdt: wdt@18060008 {
compatible = "qca,qca9530-wdt", "qca,ar7130-wdt";
reg = <0x18060008 0x8>;
interrupts = <4>;
clocks = <&pll ATH79_CLK_AHB>;
clock-names = "wdt";
};
rst: reset-controller@1806001c {
compatible = "qca,qca9530-reset",
"qca,ar7100-reset";
reg = <0x1806001c 0xac>;
#reset-cells = <1>;
intc2: interrupt-controller@2 {
compatible = "qcom,qca9556-intc";
interrupts = <2>;
interrupt-controller;
#interrupt-cells = <1>;
qcom,pending-bits = <0x1f0>, /* pcie rc1 */
<0xf>; /* wmac */
};
};
pcie0: pcie-controller@180c0000 {
compatible = "qcom,ar7240-pci";
#address-cells = <3>;
#size-cells = <2>;
bus-range = <0x0 0x0>;
reg = <0x180c0000 0x1000>, /* CRP */
<0x180f0000 0x100>, /* CTRL */
<0x14000000 0x1000>; /* CFG */
reg-names = "crp_base", "ctrl_base", "cfg_base";
ranges = <0x2000000 0 0x10000000 0x10000000 0 0x04000000 /* pci memory */
0x1000000 0 0x00000000 0x0000000 0 0x000001>; /* io space */
interrupt-parent = <&intc2>;
interrupts = <0>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 1>;
interrupt-map = <0 0 0 0 &pcie0 0>;
status = "disabled";
};
wmac: gmac@18100000 {
compatible = "qca,qca9530-wmac";
reg = <0x18100000 0x230000>;
interrupt-parent = <&cpuintc>;
interrupts = <2>;
status = "disabled";
};
};
usb0: usb@1b000000 {
compatible = "generic-ehci";
reg = <0x1b000000 0x1000>;
interrupts = <3>;
resets = <&rst 5>;
reset-names = "usb-host";
dr_mode = "host";
has-transaction-translator;
caps-offset = <0x100>;
phy-names = "usb-phy";
phys = <&usb_phy>;
status = "disabled";
};
spi: spi@1f000000 {
compatible = "qca,ar9530-spi", "qca,ar7100-spi";
reg = <0x1f000000 0x10>;
clocks = <&pll ATH79_CLK_AHB>;
clock-names = "ahb";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
};
};
&mdio0 {
resets = <&rst 22>;
reset-names = "mdio";
};
&eth0 {
compatible = "qca,qca9530-eth", "syscon";
pll-data = <0x82000101 0x80000101 0x80001313>;
reg = <0x19000000 0x200
0x18070000 0x4>;
pll-reg = <0x4 0x2c 17>;
pll-handle = <&pll>;
reset-names = "mac";
resets = <&rst 9>;
};
&mdio1 {
resets = <&rst 23>;
reset-names = "mdio";
builtin-switch;
};
&eth1 {
compatible = "qca,qca9530-eth", "syscon";
resets = <&rst 13>;
reset-names = "mac";
};

141
target/linux/ath79/dts/qca9533_glinet_ar300m.dtsi Normal file
View file

@ -0,0 +1,141 @@
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca9533.dtsi"
/ {
compatible = "glinet,ar300m", "qca,qca9533";
model = "GL.iNet GL-AR300M";
memory@0 {
device_type = "memory";
reg = <0x0 0x8000000>;
};
extosc: ref {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-output-names = "ref";
clock-frequency = <25000000>;
};
keys {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
pinctrl-names = "default";
pinctrl-0 = <&jtag_disable_pins>;
button@0 {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
button@1 {
label = "button right";
linux,code = <BTN_0>;
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
};
button@3 {
label = "button left";
linux,code = <BTN_1>;
gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
};
};
leds {
compatible = "gpio-leds";
usb {
label = "gl-ar300m:green:usb";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
trigger-sources = <&hub_port>;
linux,default-trigger = "usbport";
};
wlan {
label = "gl-ar300m:green:wlan";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
lan {
label = "gl-ar300m:green:lan";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
status {
label = "gl-ar300m:green:status";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
};
};
&pcie0 {
status = "okay";
};
&uart {
status = "okay";
};
&usb0 {
status = "okay";
hub_port: port@1 {
reg = <1>;
#trigger-soruce-cells = <0>;
};
};
&usb_phy {
status = "okay";
};
&pll {
clocks = <&extosc>;
};
&mdio0 {
status = "okay";
phy4: ethernet-phy@4 {
reg = <4>;
phy-mode = "mii";
};
};
&mdio1 {
status = "okay";
};
&eth0 {
status = "okay";
mtd-mac-address = <&art 0x0>;
phy-handle = <&phy4>;
phy-mode = "mii";
};
&eth1 {
status = "okay";
mtd-mac-address = <&art 0x6>;
phy-mode = "gmii";
fixed-link {
speed = <1000>;
full-duplex;
};
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&art 0x1002>;
};

46
target/linux/ath79/dts/qca9533_glinet_ar300m_nor.dts Normal file
View file

@ -0,0 +1,46 @@
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca9533_glinet_ar300m.dtsi"
&spi {
status = "okay";
num-cs = <0>;
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "winbond,w25q128", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@1 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
};
partition@2 {
label = "firmware";
reg = <0x050000 0xfa0000>;
};
art: partition@3 {
label = "art";
reg = <0xff0000 0x010000>;
};
};
};
};

9
target/linux/ath79/image/generic.mk
View file

@ -40,6 +40,15 @@ define Device/glinet_ar150
endef
TARGET_DEVICES += glinet_ar150
define Device/glinet_ar300m_nor
ATH_SOC := qca9533
DEVICE_TITLE := GL.iNet GL-AR300M
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
IMAGE_SIZE := 16000k
SUPPORTED_DEVICES += gl-ar300m
endef
TARGET_DEVICES += glinet_ar300m_nor
define Device/openmesh_om5p-ac-v2
ATH_SOC := qca9558
DEVICE_TITLE := OpenMesh OM5P-AC v2