mpc85xx: Add Aerohive HiveAP-330 Access Point

The following adds the Aerohive HiveAP-330 Access Point to LEDE under
the mpc85xx/p1020 subtarget.

Hardware:
- SoC: Freescale P1020NSE2DFB
- NAND: Intel JS28F512M29EWH 64MB
- Memory: 2x ProMOS V59C1G01168QBJ3 128MB (Total of 256MB)
- 2.4GHz WiFi: Atheros AR9390-AL1A
- 5.0GHz WiFi: Atheros AR9390-AL1A
- Eth1: Atheros AR8035-A PoE
- Eth2: Atheros AR8035-A
- TPM: Atmel AT97SC3204
- LED Driver: TI LP5521

Flashing:
1. Hook into UART (9600 baud) and enter U-Boot. You may need to enter a
password of administrator or AhNf?d@ta06 if prompted.
2. Once in U-Boot, tftp boot the initramfs image:
    dhcp;
    tftpboot 0x1000000 192.168.1.101:lede-
mpc85xx-p1020-hiveap-330-initramfs.zImage;
    tftpboot 0x6000000 192.168.1.101:lede-mpc85xx-p1020-hiveap-330.fdt;
    bootm 0x1000000 - 0x6000000;
3. Once booted, scp over the sysupgrade file and sysupgrade the device
to flash LEDE to the NAND.
    sysupgrade /tmp/lede-mpc85xx-p1020-hiveap-330-sysupgrade.img

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
This commit is contained in:
Chris Blake 2017-09-30 11:14:58 -05:00 committed by Hauke Mehrtens
parent 8cd6686ef8
commit f2b7d9dc1c
11 changed files with 458 additions and 10 deletions

View file

@ -10,6 +10,9 @@ board_config_update
board=$(board_name)
case "$board" in
hiveap-330)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
;;
tl-wdr4900-v1)
ucidef_add_switch "switch0" \
"0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan"

View file

@ -5,11 +5,14 @@
. /lib/functions/leds.sh
get_status_led() {
case $(board_name) in
tl-wdr4900-v1)
status_led="tp-link:blue:system"
;;
esac
case $(board_name) in
hiveap-330)
status_led="hiveap-330:green:tricolor0"
;;
tl-wdr4900-v1)
status_led="tp-link:blue:system"
;;
esac
}
set_state() {

View file

@ -13,6 +13,9 @@ mpc85xx_board_detect() {
model=$(awk 'BEGIN{FS="[ \t]+:[ \t]"} /model/ {print $2}' /proc/cpuinfo)
case "$model" in
*"HiveAP-330")
name="hiveap-330"
;;
*"TL-WDR4900 v1")
name="tl-wdr4900-v1"
;;

View file

@ -0,0 +1,17 @@
#!/bin/sh
. /lib/functions.sh
. /lib/functions/system.sh
preinit_set_mac_address() {
case $(board_name) in
hiveap-330)
mac_wan=$(mtd_get_mac_binary hw-info 0)
[ -n "$mac_wan" ] && ifconfig eth0 hw ether "$mac_wan"
mac_lan=$(macaddr_add $(mtd_get_mac_binary hw-info 0) +1)
[ -n "$mac_lan" ] && ifconfig eth1 hw ether "$mac_lan"
;;
esac
}
boot_hook_add preinit_main preinit_set_mac_address

View file

@ -4,6 +4,10 @@
PART_NAME=firmware
get_magic_long_at() {
(get_image "$1" | dd bs=4 count=1 skip="$2" | hexdump -v -n 4 -e '1/1 "%02x"') 2>/dev/null
}
tplink_get_hwid() {
local part
@ -28,6 +32,29 @@ platform_check_image() {
[ "$#" -gt 1 ] && return 1
case $board in
hiveap-330)
local init_magic=$(get_magic_long_at "$1" "65536")
local root_magic=$(get_magic_long_at "$1" "131072")
local kernel_magic=$(get_magic_long_at "$1" "10551296")
[ "$magic" != "d00dfeed" ] && {
echo "Invalid dtb image type."
return 1
}
[ "$init_magic" != "27051956" ] && {
echo "Invalid initramfs image type."
return 1
}
[ "$root_magic" != "68737173" ] && {
echo "Invalid rootfs image type."
return 1
}
[ "$kernel_magic" != "27051956" ] && {
echo "Invalid kernel image type."
return 1
}
return 0
;;
tl-wdr4900-v1)
[ "$magic" != "01000000" ] && {
echo "Invalid image type."

View file

@ -25,6 +25,7 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_ASN1=y
CONFIG_AT803X_PHY=y
CONFIG_AUDIT_ARCH=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BOOKE=y
@ -81,6 +82,7 @@ CONFIG_E500=y
CONFIG_EARLY_PRINTK=y
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EEPROM_LEGACY=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_EPAPR_BOOT is not set
CONFIG_ETHERNET_PACKET_MANGLE=y
@ -161,6 +163,7 @@ CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING=y
CONFIG_HIVEAP_330=y
CONFIG_HW_RANDOM=y
CONFIG_HZ=250
# CONFIG_HZ_100 is not set
@ -168,6 +171,7 @@ CONFIG_HZ_250=y
CONFIG_HZ_PERIODIC=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MPC=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IOMMU_HELPER=y
@ -180,17 +184,16 @@ CONFIG_ISA_DMA_API=y
CONFIG_KERNEL_GZIP=y
CONFIG_KERNEL_START=0xc0000000
# CONFIG_KSI8560 is not set
CONFIG_LEDS_LP5521=y
CONFIG_LEDS_LP55XX_COMMON=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_LIBFDT=y
CONFIG_LOWMEM_CAM_NUM=3
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_LXT_PHY=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MDIO_BOARDINFO=y
# CONFIG_MFD_MAX77620 is not set
CONFIG_MIGRATION=y
# CONFIG_MMIO_NVRAM is not set
CONFIG_MODULES_USE_ELF_RELA=y
@ -207,8 +210,8 @@ CONFIG_MPIC_TIMER=y
# CONFIG_MPIC_U3_HT_IRQS is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_MPILIB=y
# CONFIG_MTD_CFI is not set
CONFIG_MTD_M25P80=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_SPI_NOR=y
# CONFIG_MVME2500 is not set
# CONFIG_NEED_DMA_MAP_STATE is not set

View file

@ -0,0 +1,227 @@
/*
* Aerohive HiveAP-330 Device Tree Source
*
* Copyright (C) 2017 Chris Blake <chrisrblake93@gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/include/ "fsl/p1020si-pre.dtsi"
/ {
model = "Aerohive HiveAP-330";
compatible = "aerohive,hiveap-330";
chosen {
bootargs = "console=ttyS0,9600";
bootargs-override = "console=ttyS0,9600 noinitrd";
};
memory {
device_type = "memory";
};
board_lbc: lbc: localbus@ffe05000 {
reg = <0 0xffe05000 0 0x1000>;
ranges = <0x0 0x0 0x0 0xec000000 0x4000000>;
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x4000000>;
bank-width = <2>;
device-width = <1>;
partition@0 {
reg = <0x0 0x40000>;
label = "dtb";
};
partition@40000 {
reg = <0x40000 0x40000>;
label = "initramfs";
};
partition@80000 {
reg = <0x80000 0x27c0000>;
label = "rootfs";
};
partition@2840000 {
reg = <0x2840000 0x800000>;
label = "kernel";
};
partition@3040000 {
reg = <0x3040000 0xec0000>;
label = "stock-jffs2";
read-only;
};
partition@3f00000 {
reg = <0x3f00000 0x20000>;
label = "hw-info";
read-only;
};
partition@3f20000 {
reg = <0x3f20000 0x20000>;
label = "boot-info";
read-only;
};
partition@3f40000 {
reg = <0x3f40000 0x20000>;
label = "boot-info-backup";
read-only;
};
partition@3f60000 {
reg = <0x3f60000 0x20000>;
label = "u-boot-env";
};
partition@3f80000 {
reg = <0x3f80000 0x80000>;
label = "u-boot";
read-only;
};
firmware@0 {
reg = <0x0 0x3040000>;
label = "firmware";
};
};
};
board_soc: soc: soc@ffe00000 {
ranges = <0x0 0x0 0xffe00000 0x100000>;
i2c@3100 {
tpm@29 {
compatible = "atmel,at97sc3204t";
reg = <0x29>;
};
lp5521@32 {
compatible = "national,lp5521";
reg = <0x32>;
clock-mode = /bits/ 8 <2>;
chan0 {
chan-name = "hiveap-330:red:tricolor0";
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
};
chan1 {
chan-name = "hiveap-330:green:tricolor0";
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
};
chan2 {
chan-name = "hiveap-330:blue:tricolor0";
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
};
};
/* Most likely SoC boot config */
eeprom@51 {
compatible = "eeprom";
reg = <0x51>;
};
};
mdio@24000 {
phy0: ethernet-phy@0 {
interrupts = <3 1 0 0>;
reg = <0x1>;
};
phy1: ethernet-phy@1 {
interrupts = <2 1 0 0>;
reg = <0x2>;
};
};
mdio@25000 {
status = "disabled";
};
mdio@26000 {
status = "disabled";
};
enet0: ethernet@b0000 {
status = "okay";
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
};
enet1: ethernet@b1000 {
status = "disabled";
};
enet2: ethernet@b2000 {
status = "okay";
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
};
gpio0: gpio-controller@fc00 {
};
usb@22000 {
phy_type = "ulpi";
dr_mode = "host";
};
usb@23000 {
status = "disabled";
};
};
pci0: pcie@ffe09000 {
reg = <0x0 0xffe09000 0x0 0x1000>;
ranges = <0x2000000 0x0 0xa0000000 0x0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0x0 0xffc30000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci1: pcie@ffe0a000 {
reg = <0x0 0xffe0a000 0x0 0x1000>;
ranges = <0x2000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0x0 0xffc20000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xc0000000
0x2000000 0x0 0xc0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
buttons {
compatible = "gpio-keys";
reset {
label = "Reset button";
gpios = <&gpio0 8 1>; /* active low */
linux,code = <0x198>; /* KEY_RESTART */
};
};
};
/include/ "fsl/p1020si-post.dtsi"

View file

@ -0,0 +1,89 @@
/*
* Aerohive HiveAP-330 Board Setup
*
* Copyright (C) 2017 Chris Blake <chrisrblake93@gmail.com>
*
* Based on:
* mpc85xx_rdb.c:
* MPC85xx RDB Board Setup
* Copyright 2013 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/of_platform.h>
#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
#include <mm/mmu_decl.h>
#include <asm/prom.h>
#include <asm/udbg.h>
#include <asm/mpic.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
#include "smp.h"
#include "mpc85xx.h"
void __init hiveap_330_pic_init(void)
{
struct mpic *mpic;
mpic = mpic_alloc(NULL, 0,
MPIC_BIG_ENDIAN |
MPIC_SINGLE_DEST_CPU,
0, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
mpic_init(mpic);
}
/*
* Setup the architecture
*/
static void __init hiveap_330_setup_arch(void)
{
if (ppc_md.progress)
ppc_md.progress("hiveap_330_setup_arch()", 0);
mpc85xx_smp_init();
fsl_pci_assign_primary();
printk(KERN_INFO "HiveAP-330 board from Aerohive\n");
}
machine_arch_initcall(hiveap_330, mpc85xx_common_publish_devices);
/*
* Called very early, device-tree isn't unflattened
*/
static int __init hiveap_330_probe(void)
{
if (of_machine_is_compatible("aerohive,hiveap-330"))
return 1;
return 0;
}
define_machine(hiveap_330) {
.name = "P1020 RDB",
.probe = hiveap_330_probe,
.setup_arch = hiveap_330_setup_arch,
.init_IRQ = hiveap_330_pic_init,
#ifdef CONFIG_PCI
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
.pcibios_fixup_phb = fsl_pcibios_fixup_phb,
#endif
.get_irq = mpic_get_irq,
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
};

View file

@ -21,7 +21,18 @@ endef
zImage:=$(BIN_DIR)/$(IMG_PREFIX)-zImage
DTS_TARGETS = fsl/p1010rdb-pa tl-wdr4900-v1 fsl/p1020rdb
DTS_TARGETS = hiveap-330 fsl/p1010rdb-pa tl-wdr4900-v1 fsl/p1020rdb
define Build/empty-initramfs
-mkdir $(KDIR_TMP)/empty-initramfs; \
cd $(KDIR_TMP)/empty-initramfs; \
find . | cpio -o -H newc | gzip -9n > $(KDIR_TMP)/empty-initramfs.gpio.gz
-$(STAGING_DIR_HOST)/bin/mkimage -A $(LINUX_KARCH) -O linux -T ramdisk \
-C gzip -n "empty initramfs" \
-d $(KDIR_TMP)/empty-initramfs.gpio.gz \
$(KDIR_TMP)/$(IMG_PREFIX)-empty-initramfs.image
endef
define Image/BuildKernel
cp $(KDIR)/zImage $(BIN_DIR)/$(IMG_PREFIX)-zImage
@ -35,6 +46,21 @@ define Image/BuildKernel/Initramfs
ifeq ($(SUBTARGET),generic)
cp $(KDIR)/cuImage.tl-wdr4900-v1-initramfs $(BIN_DIR)/$(IMG_PREFIX)-tl-wdr4900-v1-initramfs.uImage
endif
ifeq ($(SUBTARGET),p1020)
cp $(KDIR)/zImage-initramfs $(BIN_DIR)/$(IMG_PREFIX)-hiveap-330-initramfs.zImage
endif
endef
define Image/Build/Aerohive
$(call Build/empty-initramfs)
ifeq ($(2),hiveap-330)
( \
dd if=$(BIN_DIR)/$(IMG_PREFIX)-$(2).fdt bs=256k conv=sync; \
dd if=$(KDIR_TMP)/$(IMG_PREFIX)-empty-initramfs.image bs=256k conv=sync; \
dd if=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=40704k conv=sync; \
dd if=$(KDIR)/zImage conv=sync; \
) > $(BIN_DIR)/$(IMG_PREFIX)-$(2)-sysupgrade.img
endif
endef
define Image/Build/TPLINK
@ -50,6 +76,10 @@ define Image/Build/TPLINK
-o $(call sysupname,$(1),$(2))
endef
define Image/Build/Profile/hiveap-330
$(call Image/Build/Aerohive,$(1),hiveap-330)
endef
define Image/Build/Profile/TLWDR4900
$(call Image/Build/TPLINK,$(1),tl-wdr4900-v1,cuImage.tl-wdr4900-v1,0x49000001,1,16Mppc)
endef

View file

@ -0,0 +1,16 @@
#
# Copyright (C) 2017 Chris Blake <chrisrblake93@gmail.com>
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
define Profile/hiveap-330
NAME:=Aerohive HiveAP-330
PACKAGES:=kmod-usb-storage kmod-ath9k wpad-mini kmod-tpm-i2c-atmel
endef
define Profile/hiveap-330/Description
Package set optimized for the Aerohive HiveAP-330.
endef
$(eval $(call Profile,hiveap-330))

View file

@ -0,0 +1,30 @@
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -48,6 +48,17 @@ config BSC9132_QDS
and dual StarCore SC3850 DSP cores.
Manufacturer : Freescale Semiconductor, Inc
+config HIVEAP_330
+ bool "Aerohive HiveAP-330"
+ select DEFAULT_UIMAGE
+ select ARCH_REQUIRE_GPIOLIB
+ select GPIO_MPC8XXX
+ help
+ This option enables support for the Aerohive HiveAP-330 board.
+
+ This board is a Concurrent Dual-Band wireless access point with a
+ Freescale P1020 SoC.
+
config MPC8540_ADS
bool "Freescale MPC8540 ADS"
select DEFAULT_UIMAGE
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -9,6 +9,7 @@ obj-y += common.o
obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o
obj-$(CONFIG_BSC9132_QDS) += bsc913x_qds.o
obj-$(CONFIG_C293_PCIE) += c293pcie.o
+obj-$(CONFIG_HIVEAP_330) += hiveap-330.o
obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o