bcm53xx: add pending BCM5301X patches: Netgear R8000 WiFi & Luxul DTS
This specifies wireless limitations for Netgear R8000 making sure people won't use channels incorrectly (limited performance). There are also 2 new DTS files not used by us yet. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
This commit is contained in:
Rafał Miłecki
parent
ee6cce6b31
commit
ea6d10d572
4 changed files with 343 additions and 1 deletions
|
|
@ -0,0 +1,123 @@
|
|||
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
|
||||
Subject: [PATCH] ARM: BCM5301X: Set 5 GHz wireless frequency limits on Netgear
|
||||
R8000
|
||||
MIME-Version: 1.0
|
||||
Content-Type: text/plain; charset=UTF-8
|
||||
Content-Transfer-Encoding: 8bit
|
||||
|
||||
Netgear R8000 is a tri-band home router. It has three BCM43602 chipsets
|
||||
two of them for 5 GHz band. Both seem the same and their firmwares
|
||||
report the same set of channels. The problem is due to hardware / board
|
||||
design there are extra limitations that should be respected.
|
||||
|
||||
First PHY should be used for U-NII-2 and U-NII-3. Third PHY should be
|
||||
used for U-NII-1. Using them in a different way may result in wireless
|
||||
not working or in noticeably reduced performance. Basic version of this
|
||||
info was provided by Broadcom employee, then it has been verified by me
|
||||
using original vendor firmware (which has limitations hardcoded in UI).
|
||||
|
||||
This patch uses recently introduced ieee80211-freq-limit property to
|
||||
describe these limitations at DT level.
|
||||
|
||||
Referencing PCIe devices in DT required specifying all related bridges.
|
||||
Below you can see (a bit complex) PCI tree from R8000 that explains all
|
||||
entries that I needed to put in DT.
|
||||
|
||||
0000:00:00.0 14e4:8012 Bridge Device
|
||||
└─ 0000:01:00.0 14e4:aa52 Network Controller
|
||||
|
||||
0001:00:00.0 14e4:8012 Bridge Device
|
||||
└─ 0001:01:00.0 10b5:8603 Bridge Device
|
||||
├─ 0001:02:01.0 10b5:8603 Bridge Device
|
||||
│ └─ 0001:03:00.0 14e4:aa52 Network Controller
|
||||
├─ 0001:02:02.0 10b5:8603 Bridge Device
|
||||
│ └─ 0001:04:00.0 14e4:aa52 Network Controller
|
||||
├─ 0001:02:03.0 000d:0000 0x000000
|
||||
├─ 0001:02:04.0 000d:0000 0x000000
|
||||
├─ 0001:02:05.0 000d:0000 0x000000
|
||||
├─ 0001:02:06.0 000d:0000 0x000000
|
||||
├─ (...)
|
||||
├─ 0001:02:1d.0 000d:0000 0x000000
|
||||
├─ 0001:02:1e.0 000d:0000 0x000000
|
||||
└─ 0001:02:1f.0 000d:0000 0x000000
|
||||
|
||||
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
|
||||
---
|
||||
arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 48 +++++++++++++++++++++++++++++
|
||||
arch/arm/boot/dts/bcm5301x.dtsi | 8 +++++
|
||||
2 files changed, 56 insertions(+)
|
||||
|
||||
--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
|
||||
+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
|
||||
@@ -108,6 +108,54 @@
|
||||
};
|
||||
};
|
||||
|
||||
+&pcie0 {
|
||||
+ #address-cells = <3>;
|
||||
+ #size-cells = <2>;
|
||||
+
|
||||
+ bridge@0,0,0 {
|
||||
+ reg = <0x0000 0 0 0 0>;
|
||||
+
|
||||
+ #address-cells = <3>;
|
||||
+ #size-cells = <2>;
|
||||
+
|
||||
+ wifi@0,1,0 {
|
||||
+ reg = <0x0000 0 0 0 0>;
|
||||
+ ieee80211-freq-limit = <5735000 5835000>;
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&pcie1 {
|
||||
+ #address-cells = <3>;
|
||||
+ #size-cells = <2>;
|
||||
+
|
||||
+ bridge@1,0,0 {
|
||||
+ reg = <0x0000 0 0 0 0>;
|
||||
+
|
||||
+ #address-cells = <3>;
|
||||
+ #size-cells = <2>;
|
||||
+
|
||||
+ bridge@1,1,0 {
|
||||
+ reg = <0x0000 0 0 0 0>;
|
||||
+
|
||||
+ #address-cells = <3>;
|
||||
+ #size-cells = <2>;
|
||||
+
|
||||
+ bridge@1,2,2 {
|
||||
+ reg = <0x1000 0 0 0 0>;
|
||||
+
|
||||
+ #address-cells = <3>;
|
||||
+ #size-cells = <2>;
|
||||
+
|
||||
+ wifi@1,4,0 {
|
||||
+ reg = <0x0000 0 0 0 0>;
|
||||
+ ieee80211-freq-limit = <5170000 5730000>;
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
&usb2 {
|
||||
vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
--- a/arch/arm/boot/dts/bcm5301x.dtsi
|
||||
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
|
||||
@@ -243,6 +243,14 @@
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
+ pcie0: pcie@12000 {
|
||||
+ reg = <0x00012000 0x1000>;
|
||||
+ };
|
||||
+
|
||||
+ pcie1: pcie@13000 {
|
||||
+ reg = <0x00013000 0x1000>;
|
||||
+ };
|
||||
+
|
||||
usb2: usb2@21000 {
|
||||
reg = <0x00021000 0x1000>;
|
||||
|
||||
|
|
@ -0,0 +1,86 @@
|
|||
From: Dan Haab <dhaab@luxul.com>
|
||||
Subject: [PATCH] ARM: BCM5301X: Add DT for Luxul XAP-1410
|
||||
|
||||
Luxul XAP-1410 in a dual-band access point device based on BCM47081 with
|
||||
serial flash. It has 3 LEDs and just one (reset) button.
|
||||
|
||||
Signed-off-by: Dan Haab <dhaab@luxul.com>
|
||||
---
|
||||
arch/arm/boot/dts/Makefile | 1 +
|
||||
arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts | 60 +++++++++++++++++++++++++++
|
||||
2 files changed, 61 insertions(+)
|
||||
create mode 100644 arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
|
||||
|
||||
--- a/arch/arm/boot/dts/Makefile
|
||||
+++ b/arch/arm/boot/dts/Makefile
|
||||
@@ -73,6 +73,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
|
||||
bcm47081-asus-rt-n18u.dtb \
|
||||
bcm47081-buffalo-wzr-600dhp2.dtb \
|
||||
bcm47081-buffalo-wzr-900dhp.dtb \
|
||||
+ bcm47081-luxul-xap-1410.dtb \
|
||||
bcm4709-asus-rt-ac87u.dtb \
|
||||
bcm4709-buffalo-wxr-1900dhp.dtb \
|
||||
bcm4709-netgear-r7000.dtb \
|
||||
--- /dev/null
|
||||
+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
|
||||
@@ -0,0 +1,60 @@
|
||||
+/*
|
||||
+ * Copyright 2017 Luxul Inc.
|
||||
+ *
|
||||
+ * Licensed under the ISC license.
|
||||
+ */
|
||||
+
|
||||
+/dts-v1/;
|
||||
+
|
||||
+#include "bcm47081.dtsi"
|
||||
+
|
||||
+/ {
|
||||
+ compatible = "luxul,xap-1410v1", "brcm,bcm47081", "brcm,bcm4708";
|
||||
+ model = "Luxul XAP-1410 V1";
|
||||
+
|
||||
+ chosen {
|
||||
+ bootargs = "console=ttyS0,115200";
|
||||
+ };
|
||||
+
|
||||
+ memory {
|
||||
+ reg = <0x00000000 0x08000000>;
|
||||
+ };
|
||||
+
|
||||
+ leds {
|
||||
+ compatible = "gpio-leds";
|
||||
+
|
||||
+ 5ghz {
|
||||
+ label = "bcm53xx:blue:5ghz";
|
||||
+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
|
||||
+ linux,default-trigger = "none";
|
||||
+ };
|
||||
+
|
||||
+ 2ghz {
|
||||
+ label = "bcm53xx:blue:2ghz";
|
||||
+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
|
||||
+ linux,default-trigger = "none";
|
||||
+ };
|
||||
+
|
||||
+ status {
|
||||
+ label = "bcm53xx:green:status";
|
||||
+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
|
||||
+ linux,default-trigger = "timer";
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ gpio-keys {
|
||||
+ compatible = "gpio-keys";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+
|
||||
+ restart {
|
||||
+ label = "Reset";
|
||||
+ linux,code = <KEY_RESTART>;
|
||||
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&spi_nor {
|
||||
+ status = "okay";
|
||||
+};
|
||||
|
|
@ -0,0 +1,133 @@
|
|||
From: Dan Haab <dhaab@luxul.com>
|
||||
Subject: [PATCH] ARM: BCM5301X: Add DT for Luxul XWR-1200
|
||||
|
||||
Luxul XWR-1200 in a dual-band router based on BCM47081. It uses serial
|
||||
flash (for bootloader and NVRAM) and NAND flash (for firmware).
|
||||
|
||||
Signed-off-by: Dan Haab <dhaab@luxul.com>
|
||||
---
|
||||
arch/arm/boot/dts/Makefile | 1 +
|
||||
arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 107 ++++++++++++++++++++++++++
|
||||
2 files changed, 108 insertions(+)
|
||||
create mode 100644 arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
|
||||
|
||||
--- a/arch/arm/boot/dts/Makefile
|
||||
+++ b/arch/arm/boot/dts/Makefile
|
||||
@@ -74,6 +74,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
|
||||
bcm47081-buffalo-wzr-600dhp2.dtb \
|
||||
bcm47081-buffalo-wzr-900dhp.dtb \
|
||||
bcm47081-luxul-xap-1410.dtb \
|
||||
+ bcm47081-luxul-xwr-1200.dtb \
|
||||
bcm4709-asus-rt-ac87u.dtb \
|
||||
bcm4709-buffalo-wxr-1900dhp.dtb \
|
||||
bcm4709-netgear-r7000.dtb \
|
||||
--- /dev/null
|
||||
+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
|
||||
@@ -0,0 +1,107 @@
|
||||
+/*
|
||||
+ * Copyright 2017 Luxul Inc.
|
||||
+ *
|
||||
+ * Licensed under the ISC license.
|
||||
+ */
|
||||
+
|
||||
+/dts-v1/;
|
||||
+
|
||||
+#include "bcm47081.dtsi"
|
||||
+#include "bcm5301x-nand-cs0-bch4.dtsi"
|
||||
+
|
||||
+/ {
|
||||
+ compatible = "luxul,xwr-1200v1", "brcm,bcm47081", "brcm,bcm4708";
|
||||
+ model = "Luxul XWR-1200 V1";
|
||||
+
|
||||
+ chosen {
|
||||
+ bootargs = "console=ttyS0,115200";
|
||||
+ };
|
||||
+
|
||||
+ memory {
|
||||
+ reg = <0x00000000 0x08000000>;
|
||||
+ };
|
||||
+
|
||||
+ leds {
|
||||
+ compatible = "gpio-leds";
|
||||
+
|
||||
+ power {
|
||||
+ label = "bcm53xx:green:power";
|
||||
+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
|
||||
+ linux,default-trigger = "default-on";
|
||||
+ };
|
||||
+
|
||||
+ lan3 {
|
||||
+ label = "bcm53xx:green:lan3";
|
||||
+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
|
||||
+ linux,default-trigger = "none";
|
||||
+ };
|
||||
+
|
||||
+ lan4 {
|
||||
+ label = "bcm53xx:green:lan4";
|
||||
+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
|
||||
+ linux,default-trigger = "none";
|
||||
+ };
|
||||
+
|
||||
+ wan {
|
||||
+ label = "bcm53xx:green:wan";
|
||||
+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
|
||||
+ linux,default-trigger = "none";
|
||||
+ };
|
||||
+
|
||||
+ lan2 {
|
||||
+ label = "bcm53xx:green:lan2";
|
||||
+ gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
|
||||
+ linux,default-trigger = "none";
|
||||
+ };
|
||||
+
|
||||
+ usb {
|
||||
+ label = "bcm53xx:green:usb";
|
||||
+ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
|
||||
+ linux,default-trigger = "none";
|
||||
+ };
|
||||
+
|
||||
+ status {
|
||||
+ label = "bcm53xx:green:status";
|
||||
+ gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
|
||||
+ linux,default-trigger = "timer";
|
||||
+ };
|
||||
+
|
||||
+ 2ghz {
|
||||
+ label = "bcm53xx:green:2ghz";
|
||||
+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
|
||||
+ linux,default-trigger = "none";
|
||||
+ };
|
||||
+
|
||||
+ 5ghz {
|
||||
+ label = "bcm53xx:green:5ghz";
|
||||
+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
|
||||
+ linux,default-trigger = "none";
|
||||
+ };
|
||||
+
|
||||
+ lan1 {
|
||||
+ label = "bcm53xx:green:lan1";
|
||||
+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
|
||||
+ linux,default-trigger = "none";
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ gpio-keys {
|
||||
+ compatible = "gpio-keys";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+
|
||||
+ restart {
|
||||
+ label = "Reset";
|
||||
+ linux,code = <KEY_RESTART>;
|
||||
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&usb2 {
|
||||
+ vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
|
||||
+};
|
||||
+
|
||||
+&spi_nor {
|
||||
+ status = "okay";
|
||||
+};
|
||||
|
|
@ -9,7 +9,7 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
|
|||
|
||||
--- a/arch/arm/boot/dts/Makefile
|
||||
+++ b/arch/arm/boot/dts/Makefile
|
||||
@@ -76,6 +76,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
|
||||
@@ -78,6 +78,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
|
||||
bcm4709-asus-rt-ac87u.dtb \
|
||||
bcm4709-buffalo-wxr-1900dhp.dtb \
|
||||
bcm4709-netgear-r7000.dtb \
|
||||
|
|
|
|||
Loading…
Reference in a new issue