KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

ramips: improve BDCOM WAP2100-SK support

Browse source 
Use the generic board detection instead of the target specific one as
all recent additions are doing.

Setup the USB led via devicetree (a58535771f) and include the required
driver by default. Merge the led userspace setting with an existing
identical case.

Use the wps led for boot status indication.

Move the partitions into a partition table node (6031ab345d) and drop
needless labels. Drop misplaced cells properties (53624c1702).

Cleanup the pinmux and only switch pins to gpio functions which a
referenced as gpio in the dts.

Match the maximum image size with the size of the firmware partition.

Signed-off-by: Mathias Kresin <dev@kresin.me>
This commit is contained in:
Mathias Kresin 2018-11-26 13:26:06 +01:00
parent 71ba834cf1
commit e4d9217fe5
6 changed files with 44 additions and 43 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

11
target/linux/ramips/base-files/etc/board.d/01_leds
View file

@ -56,6 +56,10 @@ asl26555-16M)
ucidef_set_led_netdev "eth" "ETH" "asl26555:green:eth" "eth0"
set_wifi_led "asl26555:green:wlan"
;;
bdcom,wap2100-sk|\
hiwifi,hc5861b)
set_wifi_led "$boardname:green:wlan2g"
;;
broadway)
set_wifi_led "$boardname:red:wps_active"
;;
@ -172,9 +176,6 @@ hg255d)
set_wifi_led "$boardname:green:wlan"
ucidef_set_led_netdev "internet" "internet" "$boardname:green:internet" "eth0.2"
;;
hiwifi,hc5861b)
set_wifi_led "$boardname:green:wlan2g"
;;
hpm)
ucidef_set_led_netdev "eth" "ETH" "$boardname:green:eth" "eth0"
set_wifi_led "$boardname:green:wifi"
@ -369,10 +370,6 @@ vocore-16M)
w502u)
set_wifi_led "rt2800pci-phy0::radio"
;;
wap2100-sk)
set_usb_led "$boardname:green:usb"
set_wifi_led "$boardname:green:wlan2g"
;;
we1026-5g-16m)
ucidef_set_led_netdev "lan" "LAN" "we1026-5g:green:lan" "eth0"
set_wifi_led "we1026-5g:green:wifi"

2
target/linux/ramips/base-files/etc/board.d/02_network
View file

@ -198,6 +198,7 @@ ramips_setup_interfaces()
atp-52b|\
awm002-evb-4M|\
awm002-evb-8M|\
bdcom,wap2100-sk|\
c20i|\
dir-645|\
gl-mt300a|\
@ -224,7 +225,6 @@ ramips_setup_interfaces()
ubnt-erx|\
ubnt-erx-sfp|\
ur-326n4g|\
wap2100-sk|\
wrtnode|\
wrtnode2p | \
wrtnode2r | \

3
target/linux/ramips/base-files/lib/ramips.sh
View file

@ -553,9 +553,6 @@ ramips_board_detect() {
*"W502U")
name="w502u"
;;
*"WAP2100-SK")
name="wap2100-sk"
;;
*"WCR-1166DS")
name="wcr-1166ds"
;;

2
target/linux/ramips/base-files/lib/upgrade/platform.sh
View file

@ -31,6 +31,7 @@ platform_check_image() {
awm002-evb-4M|\
awm002-evb-8M|\
bc2|\
bdcom,wap2100-sk|\
bocco|\
broadway|\
c108|\
@ -186,7 +187,6 @@ platform_check_image() {
widora,neo-32m|\
mqmaker,witi-256m|\
mqmaker,witi-512m|\
wap2100-sk|\
we1026-5g-16m|\
wizfi630a|\
wl-330n|\

26
target/linux/ramips/dts/BDCOM-WAP2100-SK.dts
View file

@ -6,9 +6,14 @@
#include <dt-bindings/input/input.h>
/ {
compatible = "bdcom,bdcom-wap2100-sk", "ralink,mt7620a-soc";
compatible = "bdcom,wap2100-sk", "ralink,mt7620a-soc";
model = "BDCOM WAP2100-SK";
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
};
chosen {
bootargs = "console=ttyS0,115200";
};
@ -19,9 +24,11 @@
usb {
label = "wap2100-sk:green:usb";
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
trigger-sources = <&ohci_port1>, <&ehci_port1>;
linux,default-trigger = "usbport";
};
wps {
led_power: wps {
label = "wap2100-sk:green:wps";
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
@ -34,8 +41,6 @@
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
wps {
@ -55,13 +60,15 @@
&spi0 {
status = "okay";
en25q128@0 {
#address-cells = <1>;
#size-cells = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
@ -80,11 +87,12 @@
read-only;
};
firmware: partition@50000 {
partition@50000 {
label = "firmware";
reg = <0x50000 0xf70000>;
};
};
};
};
&gpio0 {
@ -123,7 +131,7 @@
&pinctrl {
state_default: pinctrl0 {
default {
ralink,group = "wdt", "mdio", "spi refclk", "uartf", "wled";
ralink,group = "spi refclk", "uartf", "wled";
ralink,function = "gpio";
};
};

9
target/linux/ramips/image/mt7620.mk
View file

@ -80,14 +80,13 @@ define Device/ArcherMR200
endef
TARGET_DEVICES += ArcherMR200
define Device/BDCOM-WAP2100-SK
define Device/bdcom_wap2100-sk
DTS := BDCOM-WAP2100-SK
IMAGE_SIZE := $(ralink_default_fw_size_16M)
SUPPORTED_DEVICES += wap2100-sk
IMAGE_SIZE := 15808k
DEVICE_TITLE := BDCOM WAP2100-SK (ZTE ZXECS EBG3130)
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-mt76 kmod-sdhci-mt7620
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-mt76 kmod-sdhci-mt7620 kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += BDCOM-WAP2100-SK
TARGET_DEVICES += bdcom_wap2100-sk
define Device/bocco
DTS := BOCCO