KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

bcm63xx: add support for the HSSPI controller

Browse source 
Add support for the HSSPI controller found on bcm6328 and SPI attached
flash.

SVN-Revision: 31879
This commit is contained in:
Jonas Gorski 2012-05-27 13:22:33 +00:00
parent 099d5eec06
commit e34018cc9e
33 changed files with 1241 additions and 55 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

1
target/linux/brcm63xx/config-3.3
View file

@ -126,6 +126,7 @@ CONFIG_SERIAL_BCM63XX=y
CONFIG_SERIAL_BCM63XX_CONSOLE=y CONFIG_SERIAL_BCM63XX_CONSOLE=y
CONFIG_SPI=y CONFIG_SPI=y
# CONFIG_SPI_BCM63XX is not set # CONFIG_SPI_BCM63XX is not set
# CONFIG_SPI_BCM63XX_HSSPI is not set
CONFIG_SPI_BITBANG=y CONFIG_SPI_BITBANG=y
CONFIG_SPI_GPIO=y CONFIG_SPI_GPIO=y
CONFIG_SPI_MASTER=y CONFIG_SPI_MASTER=y

38
target/linux/brcm63xx/patches-3.3/201-SPI-Allow-specifying-the-parsers-for-SPI-flash.patch Normal file
View file

@ -0,0 +1,38 @@
From 3f650fc30aa0badf9d02842ce396cea3eef2eeaa Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jonas.gorski@gmail.com>
Date: Fri, 1 Jul 2011 23:16:47 +0200
Subject: [PATCH 49/79] SPI: Allow specifying the parsers for SPI flash
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
---
include/linux/spi/flash.h | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/include/linux/spi/flash.h
+++ b/include/linux/spi/flash.h
@@ -2,7 +2,7 @@
#define LINUX_SPI_FLASH_H
struct mtd_partition;
-
+struct mtd_part_parser_data;
/**
* struct flash_platform_data: board-specific flash data
* @name: optional flash device name (eg, as used with mtdparts=)
@@ -10,6 +10,8 @@ struct mtd_partition;
* @nr_parts: number of mtd_partitions for static partitoning
* @type: optional flash device type (e.g. m25p80 vs m25p64), for use
* with chips that can't be queried for JEDEC or other IDs
+ * @part_probe_types: optional list of MTD parser names to use for
+ * partitioning
*
* Board init code (in arch/.../mach-xxx/board-yyy.c files) can
* provide information about SPI flash parts (such as DataFlash) to
@@ -25,6 +27,7 @@ struct flash_platform_data {
char *type;
+ const char **part_probe_types;
/* we'll likely add more ... use JEDEC IDs, etc */
};

23
target/linux/brcm63xx/patches-3.3/202-MTD-DEVICES-m25p80-use-parsers-if-provided-in-flash-.patch Normal file
View file

@ -0,0 +1,23 @@
From c7c3c338cb25d7f55ddb3f6bfbf3572758ca3896 Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jonas.gorski@gmail.com>
Date: Thu, 10 Nov 2011 16:53:08 +0100
Subject: [PATCH 50/79] MTD: DEVICES: m25p80: use parsers if provided in flash
platform data
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
---
drivers/mtd/devices/m25p80.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -985,7 +985,8 @@ static int __devinit m25p_probe(struct s
/* partitions should match sector boundaries; and it may be good to
* use readonly partitions for writeprotected sectors (BP2..BP0).
*/
- return mtd_device_parse_register(&flash->mtd, NULL, &ppdata,
+ return mtd_device_parse_register(&flash->mtd,
+ data ? data->part_probe_types : NULL, &ppdata,
data ? data->parts : NULL,
data ? data->nr_parts : 0);
}

92
target/linux/brcm63xx/patches-3.3/203-MTD-DEVICES-m25p80-add-support-for-limiting-reads.patch Normal file
View file

@ -0,0 +1,92 @@
From 5fb4e8d7287ac8fcb33aae8b1e9e22c5a3c392bd Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jonas.gorski@gmail.com>
Date: Thu, 10 Nov 2011 17:33:40 +0100
Subject: [PATCH 51/79] MTD: DEVICES: m25p80: add support for limiting reads
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
---
drivers/mtd/devices/m25p80.c | 29 +++++++++++++++++++++++++++--
include/linux/spi/flash.h | 4 ++++
2 files changed, 31 insertions(+), 2 deletions(-)
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -100,6 +100,7 @@ struct m25p {
u16 addr_width;
u8 erase_opcode;
u8 *command;
+ int max_transfer_len;
};
static inline struct m25p *mtd_to_m25p(struct mtd_info *mtd)
@@ -346,10 +347,9 @@ static int m25p80_erase(struct mtd_info
* Read an address range from the flash chip. The address range
* may be any size provided it is within the physical boundaries.
*/
-static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
+static int __m25p80_read(struct m25p *flash, loff_t from, size_t len,
size_t *retlen, u_char *buf)
{
- struct m25p *flash = mtd_to_m25p(mtd);
struct spi_transfer t[2];
struct spi_message m;
@@ -408,6 +408,28 @@ static int m25p80_read(struct mtd_info *
return 0;
}
+static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, u_char *buf)
+{
+ struct m25p *flash = mtd_to_m25p(mtd);
+ size_t off;
+ size_t read_len = flash->max_transfer_len;
+ size_t part_len;
+ int ret = 0;
+
+ if (!read_len)
+ return __m25p80_read(flash, from, len, retlen, buf);
+
+ *retlen = 0;
+
+ for (off = 0; off < len && !ret; off += read_len) {
+ ret = __m25p80_read(flash, from + off, min(len - off, read_len),
+ &part_len, buf + off);
+ *retlen += part_len;
+ }
+
+ return ret;
+}
/*
* Write an address range to the flash chip. Data must be written in
* FLASH_PAGESIZE chunks. The address range may be any size provided
@@ -896,6 +918,9 @@ static int __devinit m25p_probe(struct s
return -ENOMEM;
}
+ if (data)
+ flash->max_transfer_len = data->max_transfer_len;
+
flash->spi = spi;
mutex_init(&flash->lock);
dev_set_drvdata(&spi->dev, flash);
--- a/include/linux/spi/flash.h
+++ b/include/linux/spi/flash.h
@@ -13,6 +13,8 @@ struct mtd_part_parser_data;
* @part_probe_types: optional list of MTD parser names to use for
* partitioning
*
+ * @max_transfer_len: option maximum read/write length limitation for
+ * SPI controllers not able to transfer any length commands.
* Board init code (in arch/.../mach-xxx/board-yyy.c files) can
* provide information about SPI flash parts (such as DataFlash) to
* help set up the device and its appropriate default partitioning.
@@ -28,6 +30,8 @@ struct flash_platform_data {
char *type;
const char **part_probe_types;
+
+ unsigned int max_transfer_len;
/* we'll likely add more ... use JEDEC IDs, etc */
};

48
target/linux/brcm63xx/patches-3.3/318-MIPS-BCM63XX-expose-the-HS-SPI-clock.patch Normal file
View file

@ -0,0 +1,48 @@
From 5aeb6273a610f8aab090b3499827177eb41311ba Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jonas.gorski@gmail.com>
Date: Sat, 12 Nov 2011 12:19:09 +0100
Subject: [PATCH 53/79] MIPS: BCM63XX: expose the HS SPI clock
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
---
arch/mips/bcm63xx/clk.c | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
--- a/arch/mips/bcm63xx/clk.c
+++ b/arch/mips/bcm63xx/clk.c
@@ -194,6 +194,26 @@ static struct clk clk_spi = {
};
/*
+ * SPI clock
+ */
+static void hsspi_set(struct clk *clk, int enable)
+{
+ u32 mask;
+
+ if (BCMCPU_IS_6328())
+ mask = CKCTL_6328_HSSPI_EN;
+ else
+ return;
+
+ bcm_hwclock_set(mask, enable);
+}
+
+static struct clk clk_hsspi = {
+ .set = hsspi_set,
+};
+
+
+/*
* XTM clock
*/
static void xtm_set(struct clk *clk, int enable)
@@ -286,6 +306,8 @@ struct clk *clk_get(struct device *dev,
return &clk_usbh;
if (!strcmp(id, "spi"))
return &clk_spi;
+ if (!strcmp(id, "hsspi"))
+ return &clk_hsspi;
if (!strcmp(id, "xtm"))
return &clk_xtm;
if (!strcmp(id, "periph"))

136
target/linux/brcm63xx/patches-3.3/418-MIPS-BCM63XX-add-HS-SPI-platform-device-and-register.patch Normal file
View file

@ -0,0 +1,136 @@
From a2b75f344cdc0f9e12c7909511d95b27be72c6b9 Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jonas.gorski@gmail.com>
Date: Sat, 12 Nov 2011 12:18:26 +0100
Subject: [PATCH 52/79] MIPS: BCM63XX: add HS SPI platform device and register
it
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
---
arch/mips/bcm63xx/Makefile | 5 +-
arch/mips/bcm63xx/boards/board_bcm963xx.c | 2 +
arch/mips/bcm63xx/dev-hsspi.c | 58 ++++++++++++++++++++
.../include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h | 26 +++++++++
4 files changed, 89 insertions(+), 2 deletions(-)
create mode 100644 arch/mips/bcm63xx/dev-hsspi.c
create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h
--- a/arch/mips/bcm63xx/Makefile
+++ b/arch/mips/bcm63xx/Makefile
@@ -1,6 +1,7 @@
obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
- dev-dsp.o dev-enet.o dev-flash.o dev-pcmcia.o dev-spi.o \
- dev-trng.o dev-uart.o dev-usb-ehci.o dev-usb-ohci.o dev-wdt.o
+ dev-dsp.o dev-enet.o dev-flash.o dev-hsspi.o dev-pcmcia.o \
+ dev-spi.o dev-trng.o dev-uart.o dev-usb-ehci.o \
+ dev-usb-ohci.o dev-wdt.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-y += boards/
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -24,6 +24,7 @@
#include <bcm63xx_dev_enet.h>
#include <bcm63xx_dev_dsp.h>
#include <bcm63xx_dev_flash.h>
+#include <bcm63xx_dev_hsspi.h>
#include <bcm63xx_dev_pcmcia.h>
#include <bcm63xx_dev_spi.h>
#include <bcm63xx_dev_usb_ohci.h>
@@ -940,6 +941,7 @@ int __init board_register_devices(void)
pr_err(PFX "failed to register fallback SPROM\n");
}
#endif
+ bcm63xx_hsspi_register();
bcm63xx_spi_register();
--- /dev/null
+++ b/arch/mips/bcm63xx/dev-hsspi.c
@@ -0,0 +1,58 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2009 Florian Fainelli <florian@openwrt.org>
+ * Copyright (C) 2010 Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_dev_hsspi.h>
+#include <bcm63xx_regs.h>
+
+static struct resource spi_resources[] = {
+ {
+ .start = -1, /* filled at runtime */
+ .end = -1, /* filled at runtime */
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = -1, /* filled at runtime */
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct bcm63xx_hsspi_pdata spi_pdata = {
+ .bus_num = 0,
+};
+
+static struct platform_device bcm63xx_hsspi_device = {
+ .name = "bcm63xx-hsspi",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(spi_resources),
+ .resource = spi_resources,
+ .dev = {
+ .platform_data = &spi_pdata,
+ },
+};
+
+int __init bcm63xx_hsspi_register(void)
+{
+
+ if (!BCMCPU_IS_6328())
+ return -ENODEV;
+
+ spi_resources[0].start = bcm63xx_regset_address(RSET_HSSPI);
+ spi_resources[0].end = spi_resources[0].start;
+ spi_resources[0].end += RSET_HSSPI_SIZE - 1;
+ spi_resources[1].start = bcm63xx_get_irq_number(IRQ_HSSPI);
+
+ spi_pdata.speed_hz = HSSPI_PLL_HZ_6328;
+
+ return platform_device_register(&bcm63xx_hsspi_device);
+}
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h
@@ -0,0 +1,26 @@
+#ifndef BCM63XX_DEV_HSSPI_H
+#define BCM63XX_DEV_HSSPI_H
+
+#include <linux/types.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_regs.h>
+
+int __init bcm63xx_hsspi_register(void);
+
+struct bcm63xx_hsspi_pdata {
+ int bus_num;
+ u32 speed_hz;
+};
+
+#define bcm_hsspi_readl(o) bcm_rset_readl(RSET_HSSPI, (o))
+#define bcm_hsspi_writel(v, o) bcm_rset_writel(RSET_HSSPI, (v), (o))
+
+#define HSSPI_PLL_HZ_6328 133333333
+
+#define HSSPI_OP_CODE_SHIFT 13
+#define HSSPI_OP_SLEEP (0 << HSSPI_OP_CODE_SHIFT)
+#define HSSPI_OP_READ_WRITE (1 << HSSPI_OP_CODE_SHIFT)
+#define HSSPI_OP_WRITE (2 << HSSPI_OP_CODE_SHIFT)
+#define HSSPI_OP_READ (3 << HSSPI_OP_CODE_SHIFT)
+
+#endif /* BCM63XX_DEV_HSSPI_H */

759
target/linux/brcm63xx/patches-3.3/419-SPI-MIPS-BCM63XX-Add-HS-SPI-driver.patch Normal file
View file

@ -0,0 +1,759 @@
From 2982127b8a0127667cb5354e03987cd3baa84b8c Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jonas.gorski@gmail.com>
Date: Sat, 12 Nov 2011 12:19:55 +0100
Subject: [PATCH 54/79] SPI: MIPS: BCM63XX: Add HS SPI driver
Add a driver for the High Speed SPI controller found on newer BCM63XX SoCs.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
---
arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 18 +
.../include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h | 3 +
arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 47 ++
drivers/spi/Kconfig | 7 +
drivers/spi/Makefile | 1 +
drivers/spi/spi-bcm63xx-hsspi.c | 502 ++++++++++++++++++++
6 files changed, 578 insertions(+)
create mode 100644 drivers/spi/spi-bcm63xx-hsspi.c
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
@@ -116,6 +116,7 @@ enum bcm63xx_regs_set {
RSET_UART1,
RSET_GPIO,
RSET_SPI,
+ RSET_HSSPI,
RSET_UDC0,
RSET_OHCI0,
RSET_OHCI_PRIV,
@@ -161,6 +162,7 @@ enum bcm63xx_regs_set {
#define RSET_ENETDMAS_SIZE(chans) (16 * (chans))
#define RSET_ENETSW_SIZE 65536
#define RSET_UART_SIZE 24
+#define RSET_HSSPI_SIZE 2048
#define RSET_UDC_SIZE 256
#define RSET_OHCI_SIZE 256
#define RSET_EHCI_SIZE 256
@@ -184,6 +186,7 @@ enum bcm63xx_regs_set {
#define BCM_6328_UART1_BASE (0xb0000120)
#define BCM_6328_GPIO_BASE (0xb0000080)
#define BCM_6328_SPI_BASE (0xdeadbeef)
+#define BCM_6328_HSSPI_BASE (0xb0001000)
#define BCM_6328_UDC0_BASE (0xdeadbeef)
#define BCM_6328_USBDMA_BASE (0xdeadbeef)
#define BCM_6328_OHCI0_BASE (0xdeadbeef)
@@ -229,6 +232,7 @@ enum bcm63xx_regs_set {
#define BCM_6338_UART1_BASE (0xdeadbeef)
#define BCM_6338_GPIO_BASE (0xfffe0400)
#define BCM_6338_SPI_BASE (0xfffe0c00)
+#define BCM_6338_HSSPI_BASE (0xdeadbeef)
#define BCM_6338_UDC0_BASE (0xdeadbeef)
#define BCM_6338_USBDMA_BASE (0xfffe2400)
#define BCM_6338_OHCI0_BASE (0xdeadbeef)
@@ -275,6 +279,7 @@ enum bcm63xx_regs_set {
#define BCM_6345_UART1_BASE (0xdeadbeef)
#define BCM_6345_GPIO_BASE (0xfffe0400)
#define BCM_6345_SPI_BASE (0xdeadbeef)
+#define BCM_6345_HSSPI_BASE (0xdeadbeef)
#define BCM_6345_UDC0_BASE (0xdeadbeef)
#define BCM_6345_USBDMA_BASE (0xfffe2800)
#define BCM_6345_ENET0_BASE (0xfffe1800)
@@ -320,6 +325,7 @@ enum bcm63xx_regs_set {
#define BCM_6348_UART1_BASE (0xdeadbeef)
#define BCM_6348_GPIO_BASE (0xfffe0400)
#define BCM_6348_SPI_BASE (0xfffe0c00)
+#define BCM_6348_HSSPI_BASE (0xdeadbeef)
#define BCM_6348_UDC0_BASE (0xfffe1000)
#define BCM_6348_OHCI0_BASE (0xfffe1b00)
#define BCM_6348_OHCI_PRIV_BASE (0xfffe1c00)
@@ -363,6 +369,7 @@ enum bcm63xx_regs_set {
#define BCM_6358_UART1_BASE (0xfffe0120)
#define BCM_6358_GPIO_BASE (0xfffe0080)
#define BCM_6358_SPI_BASE (0xfffe0800)
+#define BCM_6358_HSSPI_BASE (0xdeadbeef)
#define BCM_6358_UDC0_BASE (0xfffe0800)
#define BCM_6358_OHCI0_BASE (0xfffe1400)
#define BCM_6358_OHCI_PRIV_BASE (0xdeadbeef)
@@ -407,6 +414,7 @@ enum bcm63xx_regs_set {
#define BCM_6368_UART1_BASE (0xb0000120)
#define BCM_6368_GPIO_BASE (0xb0000080)
#define BCM_6368_SPI_BASE (0xb0000800)
+#define BCM_6368_HSSPI_BASE (0xdeadbeef)
#define BCM_6368_UDC0_BASE (0xdeadbeef)
#define BCM_6368_OHCI0_BASE (0xb0001600)
#define BCM_6368_OHCI_PRIV_BASE (0xdeadbeef)
@@ -456,6 +464,7 @@ extern const unsigned long *bcm63xx_regs
__GEN_RSET_BASE(__cpu, UART1) \
__GEN_RSET_BASE(__cpu, GPIO) \
__GEN_RSET_BASE(__cpu, SPI) \
+ __GEN_RSET_BASE(__cpu, HSSPI) \
__GEN_RSET_BASE(__cpu, UDC0) \
__GEN_RSET_BASE(__cpu, OHCI0) \
__GEN_RSET_BASE(__cpu, OHCI_PRIV) \
@@ -497,6 +506,7 @@ extern const unsigned long *bcm63xx_regs
[RSET_UART1] = BCM_## __cpu ##_UART1_BASE, \
[RSET_GPIO] = BCM_## __cpu ##_GPIO_BASE, \
[RSET_SPI] = BCM_## __cpu ##_SPI_BASE, \
+ [RSET_HSSPI] = BCM_## __cpu ##_HSSPI_BASE, \
[RSET_UDC0] = BCM_## __cpu ##_UDC0_BASE, \
[RSET_OHCI0] = BCM_## __cpu ##_OHCI0_BASE, \
[RSET_OHCI_PRIV] = BCM_## __cpu ##_OHCI_PRIV_BASE, \
@@ -569,6 +579,7 @@ enum bcm63xx_irq {
IRQ_ENET0,
IRQ_ENET1,
IRQ_ENET_PHY,
+ IRQ_HSSPI,
IRQ_OHCI0,
IRQ_EHCI0,
IRQ_ENET0_RXDMA,
@@ -604,6 +615,7 @@ enum bcm63xx_irq {
#define BCM_6328_ENET0_IRQ 0
#define BCM_6328_ENET1_IRQ 0
#define BCM_6328_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 12)
+#define BCM_6328_HSSPI_IRQ (IRQ_INTERNAL_BASE + 29)
#define BCM_6328_OHCI0_IRQ (IRQ_INTERNAL_BASE + 9)
#define BCM_6328_EHCI0_IRQ (IRQ_INTERNAL_BASE + 10)
#define BCM_6328_PCMCIA_IRQ 0
@@ -642,6 +654,7 @@ enum bcm63xx_irq {
#define BCM_6338_ENET0_IRQ (IRQ_INTERNAL_BASE + 8)
#define BCM_6338_ENET1_IRQ 0
#define BCM_6338_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 9)
+#define BCM_6338_HSSPI_IRQ 0
#define BCM_6338_OHCI0_IRQ 0
#define BCM_6338_EHCI0_IRQ 0
#define BCM_6338_ENET0_RXDMA_IRQ (IRQ_INTERNAL_BASE + 15)
@@ -673,6 +686,7 @@ enum bcm63xx_irq {
#define BCM_6345_ENET0_IRQ (IRQ_INTERNAL_BASE + 8)
#define BCM_6345_ENET1_IRQ 0
#define BCM_6345_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 12)
+#define BCM_6345_HSSPI_IRQ 0
#define BCM_6345_OHCI0_IRQ 0
#define BCM_6345_EHCI0_IRQ 0
#define BCM_6345_ENET0_RXDMA_IRQ (IRQ_INTERNAL_BASE + 13 + 1)
@@ -704,6 +718,7 @@ enum bcm63xx_irq {
#define BCM_6348_ENET0_IRQ (IRQ_INTERNAL_BASE + 8)
#define BCM_6348_ENET1_IRQ (IRQ_INTERNAL_BASE + 7)
#define BCM_6348_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 9)
+#define BCM_6348_HSSPI_IRQ 0
#define BCM_6348_OHCI0_IRQ (IRQ_INTERNAL_BASE + 12)
#define BCM_6348_EHCI0_IRQ 0
#define BCM_6348_ENET0_RXDMA_IRQ (IRQ_INTERNAL_BASE + 20)
@@ -735,6 +750,7 @@ enum bcm63xx_irq {
#define BCM_6358_ENET0_IRQ (IRQ_INTERNAL_BASE + 8)
#define BCM_6358_ENET1_IRQ (IRQ_INTERNAL_BASE + 6)
#define BCM_6358_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 9)
+#define BCM_6358_HSSPI_IRQ 0
#define BCM_6358_OHCI0_IRQ (IRQ_INTERNAL_BASE + 5)
#define BCM_6358_EHCI0_IRQ (IRQ_INTERNAL_BASE + 10)
#define BCM_6358_ENET0_RXDMA_IRQ (IRQ_INTERNAL_BASE + 15)
@@ -775,6 +791,7 @@ enum bcm63xx_irq {
#define BCM_6368_ENET0_IRQ 0
#define BCM_6368_ENET1_IRQ 0
#define BCM_6368_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 15)
+#define BCM_6368_HSSPI_IRQ 0
#define BCM_6368_OHCI0_IRQ (IRQ_INTERNAL_BASE + 5)
#define BCM_6368_EHCI0_IRQ (IRQ_INTERNAL_BASE + 7)
#define BCM_6368_PCMCIA_IRQ 0
@@ -815,6 +832,7 @@ extern const int *bcm63xx_irqs;
[IRQ_ENET0] = BCM_## __cpu ##_ENET0_IRQ, \
[IRQ_ENET1] = BCM_## __cpu ##_ENET1_IRQ, \
[IRQ_ENET_PHY] = BCM_## __cpu ##_ENET_PHY_IRQ, \
+ [IRQ_HSSPI] = BCM_## __cpu ##_HSSPI_IRQ, \
[IRQ_OHCI0] = BCM_## __cpu ##_OHCI0_IRQ, \
[IRQ_EHCI0] = BCM_## __cpu ##_EHCI0_IRQ, \
[IRQ_ENET0_RXDMA] = BCM_## __cpu ##_ENET0_RXDMA_IRQ, \
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h
@@ -23,4 +23,7 @@ struct bcm63xx_hsspi_pdata {
#define HSSPI_OP_WRITE (2 << HSSPI_OP_CODE_SHIFT)
#define HSSPI_OP_READ (3 << HSSPI_OP_CODE_SHIFT)
+#define HS_SPI_CLOCK_DEF 40000000
+#define HS_SPI_BUFFER_LEN 512
+
#endif /* BCM63XX_DEV_HSSPI_H */
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
@@ -1276,4 +1276,51 @@
#define PCIE_DEVICE_OFFSET 0x8000
+/*************************************************************************
+ * _REG relative to RSET_HSSPI
+ *************************************************************************/
+
+#define HSSPI_GLOBAL_CTRL_REG 0x0
+#define GLOBAL_CTRL_CLK_POLARITY BIT(17)
+#define GLOBAL_CTRL_CLK_GATE_SSOFF BIT(16)
+
+#define HSSPI_GLOBAL_EXT_TRIGGER_REG 0x4
+
+#define HSSPI_INT_STATUS_REG 0x8
+#define HSSPI_INT_STATUS_MASKED_REG 0xc
+#define HSSPI_INT_MASK_REG 0x10
+
+#define HSSPI_PING0_CMD_DONE BIT(0)
+
+#define HSSPI_INT_CLEAR_ALL 0xff001f1f
+
+#define HSSPI_PINGPONG_COMMAND_REG(x) (0x80 + (x) * 0x40)
+#define PINGPONG_CMD_COMMAND_MASK 0xf
+#define PINGPONG_COMMAND_NOOP 0
+#define PINGPONG_COMMAND_START_NOW 1
+#define PINGPONG_COMMAND_START_TRIGGER 2
+#define PINGPONG_COMMAND_HALT 3
+#define PINGPONG_COMMAND_FLUSH 4
+#define PINGPONG_CMD_PROFILE_SHIFT 8
+#define PINGPONG_CMD_SS_SHIFT 12
+
+#define HSSPI_PINGPONG_STATUS_REG(x) (0x84 + (x) * 0x40)
+
+#define HSSPI_PROFILE_CLK_CTRL_REG(x) (0x100 + (x) * 0x20)
+#define CLK_CTRL_ACCUM_RST_ON_LOOP BIT(15)
+
+#define HSSPI_PROFILE_SIGNAL_CTRL_REG(x) (0x104 + (x) * 0x20)
+#define SIGNAL_CTRL_LATCH_RISING BIT(12)
+#define SIGNAL_CTRL_LAUNCH_RISING BIT(13)
+#define SIGNAL_CTRL_ASYNC_INPUT_PATH BIT(16)
+
+#define HSSPI_PROFILE_MODE_CTRL_REG(x) (0x108 + (x) * 0x20)
+#define MODE_CTRL_MULTIDATA_RD_STRT_SHIFT 8
+#define MODE_CTRL_MULTIDATA_WR_STRT_SHIFT 12
+#define MODE_CTRL_MULTIDATA_RD_SIZE_SHIFT 16
+#define MODE_CTRL_MULTIDATA_WR_SIZE_SHIFT 18
+#define MODE_CTRL_PREPENDBYTE_CNT_SHIFT 24
+
+#define HSSPI_FIFO_REG(x) (0x200 + (x) * 0x200)
+
#endif /* BCM63XX_REGS_H_ */
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -100,6 +100,13 @@ config SPI_BCM63XX
help
Enable support for the SPI controller on the Broadcom BCM63xx SoCs.
+config SPI_BCM63XX_HSSPI
+ tristate "Broadcom BCM63XX HS SPI controller driver"
+ depends on BCM63XX
+ help
+ This enables support for the High Speed SPI controller present on
+ newer Broadcom BCM63XX SoCs.
+
config SPI_BITBANG
tristate "Utilities for Bitbanging SPI masters"
help
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_SPI_ATMEL) += spi-atmel.o
obj-$(CONFIG_SPI_ATH79) += spi-ath79.o
obj-$(CONFIG_SPI_AU1550) += spi-au1550.o
obj-$(CONFIG_SPI_BCM63XX) += spi-bcm63xx.o
+obj-$(CONFIG_SPI_BCM63XX_HSSPI) += spi-bcm63xx-hsspi.o
obj-$(CONFIG_SPI_BFIN) += spi-bfin5xx.o
obj-$(CONFIG_SPI_BFIN_SPORT) += spi-bfin-sport.o
obj-$(CONFIG_SPI_BITBANG) += spi-bitbang.o
--- /dev/null
+++ b/drivers/spi/spi-bcm63xx-hsspi.c
@@ -0,0 +1,502 @@
+/*
+ * Broadcom BCM63XX High Speed SPI Controller driver
+ *
+ * Copyright 2000-2010 Broadcom Corporation
+ * Copyright 2011 Jonas Gorski <jonas.gorski@gmail.com>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/spi/spi.h>
+#include <linux/workqueue.h>
+
+#include <bcm63xx_regs.h>
+#include <bcm63xx_dev_hsspi.h>
+
+
+#define PFX KBUILD_MODNAME
+
+struct bcm63xx_hsspi {
+ spinlock_t lock;
+ int irq;
+ u8 stopping;
+
+ struct list_head queue;
+ struct workqueue_struct *workqueue;
+ struct work_struct ws;
+ struct completion done;
+
+ struct spi_transfer *curr_trans;
+
+ struct platform_device *pdev;
+ void __iomem *regs;
+ struct clk *clk;
+
+ /* Platform data */
+ u32 speed_hz;
+
+ /* data iomem */
+ u8 __iomem *fifo;
+
+
+};
+
+static void bcm63xx_hsspi_set_clk(struct bcm63xx_hsspi *bs, int hz,
+ int profile)
+{
+ int clock;
+
+ clock = bs->speed_hz / hz;
+ if (bs->speed_hz % HS_SPI_CLOCK_DEF)
+ clock++;
+
+ clock = 2048 / clock;
+ if (2048 % clock)
+ clock++;
+
+ bcm_hsspi_writel(CLK_CTRL_ACCUM_RST_ON_LOOP | clock,
+ HSSPI_PROFILE_CLK_CTRL_REG(profile));
+}
+
+static int bcm63xx_hsspi_do_txrx(struct spi_device *spi,
+ struct spi_transfer *t1,
+ struct spi_transfer *t2)
+{
+ struct bcm63xx_hsspi *bs = spi_master_get_devdata(spi->master);
+ u8 chip_select = spi->chip_select;
+ u16 opcode = 0;
+ int prepend_size = 0;
+
+ init_completion(&bs->done);
+ bs->curr_trans = t2 ? t2 : t1;
+ bcm63xx_hsspi_set_clk(bs, bs->curr_trans->speed_hz, chip_select);
+
+ BUG_ON(t2 && !t1->tx_buf && t1->rx_buf && t2->tx_buf && !t2->rx_buf);
+
+ if (t2 && !t2->tx_buf)
+ prepend_size = t1->len;
+
+ bcm_hsspi_writel(prepend_size<<MODE_CTRL_PREPENDBYTE_CNT_SHIFT |
+ 2<<MODE_CTRL_MULTIDATA_WR_STRT_SHIFT |
+ 2<<MODE_CTRL_MULTIDATA_RD_STRT_SHIFT | 0xff,
+ HSSPI_PROFILE_MODE_CTRL_REG(chip_select));
+
+ if (t1->rx_buf && t1->tx_buf)
+ opcode = HSSPI_OP_READ_WRITE;
+ else if (t1->rx_buf || (t2 && t2->rx_buf))
+ opcode = HSSPI_OP_READ;
+ else if (t1->tx_buf)
+ opcode = HSSPI_OP_WRITE;
+
+ BUG_ON(opcode == 0);
+
+ if (opcode == HSSPI_OP_READ && t2)
+ opcode |= t2->len;
+ else
+ opcode |= t1->len;
+
+ if (t1->tx_buf) {
+ memcpy_toio(bs->fifo + 2, t1->tx_buf, t1->len);
+ if (t2 && t2->tx_buf) {
+ memcpy_toio(bs->fifo + 2 + t1->len,
+ t2->tx_buf, t2->len);
+ opcode += t2->len;
+ }
+ }
+
+ memcpy_toio(bs->fifo, &opcode, sizeof(opcode));
+
+ /* enable interrupt */
+ bcm_hsspi_writel(HSSPI_PING0_CMD_DONE, HSSPI_INT_MASK_REG);
+
+ /* start the transfer */
+ bcm_hsspi_writel(chip_select << PINGPONG_CMD_SS_SHIFT |
+ chip_select << PINGPONG_CMD_PROFILE_SHIFT |
+ PINGPONG_COMMAND_START_NOW,
+ HSSPI_PINGPONG_COMMAND_REG(0));
+
+ wait_for_completion(&bs->done);
+ return t1->len + (t2 ? t2->len : 0);
+}
+static int bcm63xx_hsspi_setup(struct spi_device *spi)
+{
+ struct bcm63xx_hsspi *bs;
+ u32 reg;
+ bs = spi_master_get_devdata(spi->master);
+
+ if (bs->stopping)
+ return -ESHUTDOWN;
+
+ if (!spi->bits_per_word)
+ spi->bits_per_word = 8;
+
+ if (spi->bits_per_word != 8)
+ return -EINVAL;
+
+ if (spi->max_speed_hz == 0)
+ return -EINVAL;
+
+ reg = bcm_hsspi_readl(HSSPI_PROFILE_SIGNAL_CTRL_REG(spi->chip_select));
+ reg &= ~(SIGNAL_CTRL_LAUNCH_RISING | SIGNAL_CTRL_LATCH_RISING);
+
+ if (spi->mode & SPI_CPHA)
+ reg |= SIGNAL_CTRL_LAUNCH_RISING;
+ else
+ reg |= SIGNAL_CTRL_LATCH_RISING;
+
+ bcm_hsspi_writel(reg, HSSPI_PROFILE_SIGNAL_CTRL_REG(spi->chip_select));
+
+ return 0;
+}
+
+
+static int bcm63xx_hsspi_transfer(struct spi_device *spi,
+ struct spi_message *msg)
+{
+ struct bcm63xx_hsspi *bs = spi_master_get_devdata(spi->master);
+ struct spi_transfer *t, *prev = NULL;
+
+ if (unlikely(list_empty(&msg->transfers)))
+ return -EINVAL;
+
+ if (bs->stopping)
+ return -ESHUTDOWN;
+
+ list_for_each_entry(t, &msg->transfers, transfer_list) {
+ /* check transfer parameters */
+ if (!t->tx_buf && !t->rx_buf)
+ return -EINVAL;
+
+ if (t->speed_hz == 0)
+ t->speed_hz = spi->max_speed_hz;
+
+ if (t->speed_hz > spi->max_speed_hz)
+ return -EINVAL;
+
+ if (t->len > HS_SPI_BUFFER_LEN)
+ return -EINVAL;
+
+ /* reject if we have to combine two tx transfers and their
+ * combined length is bigger than the buffer
+ */
+ if (prev && !prev->cs_change && !t->cs_change && prev->tx_buf &&
+ t->tx_buf && (prev->len + t->len) > HS_SPI_BUFFER_LEN)
+ return -EINVAL;
+
+ prev = t;
+ }
+
+
+ msg->actual_length = 0;
+
+#if 0
+ /* disable interrupts for the SPI controller
+ using spin_lock_irqsave would disable all interrupts */
+ bcm_hsspi_writel(0, HSSPI_INT_MASK_REG);
+#endif
+ spin_lock(&bs->lock);
+ list_add_tail(&msg->queue, &bs->queue);
+ queue_work(bs->workqueue, &bs->ws);
+ spin_unlock(&bs->lock);
+
+#if 0
+ bcm_hsspi_writel(HSSPI_PING0_CMD_DONE, HSSPI_INT_MASK_REG);
+#endif
+ return 0;
+}
+
+static void bcm63xx_hsspi_do_work(struct work_struct *work)
+{
+ struct bcm63xx_hsspi *bs = container_of(work, struct bcm63xx_hsspi,
+ ws);
+ struct spi_message *msg;
+ struct spi_transfer *prev = NULL;
+ struct spi_transfer *t;
+ u32 reg;
+
+ int len = 0;
+
+ spin_lock(&bs->lock);
+ msg = list_entry(bs->queue.next, struct spi_message, queue);
+ list_del(&msg->queue);
+ spin_unlock(&bs->lock);
+
+ if (bs->stopping) {
+ msg->status = -ESHUTDOWN;
+ goto out;
+ }
+
+ /* setup clock polarity */
+ reg = bcm_hsspi_readl(HSSPI_GLOBAL_CTRL_REG);
+ reg &= ~GLOBAL_CTRL_CLK_POLARITY;
+
+ if (msg->spi->mode & SPI_CPOL)
+ reg |= GLOBAL_CTRL_CLK_POLARITY;
+
+ bcm_hsspi_writel(reg, HSSPI_GLOBAL_CTRL_REG);
+
+ list_for_each_entry(t, &msg->transfers, transfer_list) {
+ /*
+ * This controller does not support keeping the chip select
+ * active between transfers.
+ * This logic currently supports combining:
+ * write then read with no cs_change (e.g. m25p80 RDSR)
+ * write then write with no cs_change (e.g. m25p80 PP)
+ */
+ if (prev && prev->tx_buf && !prev->cs_change && !t->cs_change) {
+ /* combine write with following transfer */
+ len += bcm63xx_hsspi_do_txrx(msg->spi, prev, t);
+ prev = NULL;
+ continue;
+ }
+
+ /* write the previous pending transfer */
+ if (prev != NULL)
+ len += bcm63xx_hsspi_do_txrx(msg->spi, prev, NULL);
+
+ prev = t;
+ }
+
+ /* do last pending transfer */
+ if (prev != NULL)
+ len += bcm63xx_hsspi_do_txrx(msg->spi, prev, NULL);
+
+ msg->status = 0;
+ msg->actual_length = len;
+out:
+ msg->complete(msg->context);
+}
+
+static irqreturn_t bcm63xx_hsspi_interrupt(int irq, void *dev_id)
+{
+ struct spi_master *master = (struct spi_master *)dev_id;
+ struct bcm63xx_hsspi *bs = spi_master_get_devdata(master);
+
+ if (bcm_hsspi_readl(HSSPI_INT_STATUS_MASKED_REG) == 0)
+ return IRQ_NONE;
+
+ bcm_hsspi_writel(HSSPI_INT_CLEAR_ALL, HSSPI_INT_STATUS_REG);
+ bcm_hsspi_writel(0, HSSPI_INT_MASK_REG);
+
+ spin_lock(&bs->lock);
+
+ if (bs->curr_trans && bs->curr_trans->rx_buf)
+ memcpy_fromio(bs->curr_trans->rx_buf, bs->fifo,
+ bs->curr_trans->len);
+
+ complete(&bs->done);
+ spin_unlock(&bs->lock);
+
+ return IRQ_HANDLED;
+}
+
+
+static void bcm63xx_hsspi_cleanup(struct spi_device *spi)
+{
+ /* would free spi_controller memory here if any was allocated */
+}
+
+static int __devinit bcm63xx_hsspi_probe(struct platform_device *pdev)
+{
+
+ struct spi_master *master;
+ struct bcm63xx_hsspi *bs;
+ struct resource *res_mem;
+ struct device *dev = &pdev->dev;
+ struct bcm63xx_hsspi_pdata *pdata = pdev->dev.platform_data;
+ struct clk *clk;
+ int irq;
+ int ret;
+
+ res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res_mem) {
+ dev_err(dev, "no iomem\n");
+ return -ENXIO;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(dev, "no irq\n");
+ return -ENXIO;
+ }
+
+ clk = clk_get(dev, "hsspi");
+
+ if (IS_ERR(clk)) {
+ ret = PTR_ERR(clk);
+ goto out_release;
+ }
+ clk_enable(clk);
+
+ master = spi_alloc_master(&pdev->dev, sizeof(*bs));
+ if (!master) {
+ ret = -ENOMEM;
+ goto out_disable_clk;
+ }
+
+ bs = spi_master_get_devdata(master);
+ init_completion(&bs->done);
+ bs->pdev = pdev;
+ bs->clk = clk;
+
+ bs->regs = devm_request_and_ioremap(dev, res_mem);
+ if (!bs->regs) {
+ dev_err(dev, "unable to ioremap regs\n");
+ ret = -ENOMEM;
+ goto out_put_master;
+ }
+
+ master->bus_num = pdata->bus_num;
+ master->num_chipselect = 8;
+ master->setup = bcm63xx_hsspi_setup;
+ master->transfer = bcm63xx_hsspi_transfer;
+ master->cleanup = bcm63xx_hsspi_cleanup;
+ master->mode_bits = SPI_CPOL | SPI_CPHA;
+
+ bs->speed_hz = pdata->speed_hz;
+ bs->fifo = (u8 *)(bs->regs + HSSPI_FIFO_REG(0));
+
+ platform_set_drvdata(pdev, master);
+
+ spin_lock_init(&bs->lock);
+ INIT_LIST_HEAD(&bs->queue);
+ INIT_WORK(&bs->ws, bcm63xx_hsspi_do_work);
+ bs->workqueue = create_singlethread_workqueue(pdev->name);
+ bs->curr_trans = NULL;
+
+ /* Initialize the hardware */
+ bcm_hsspi_writel(0, HSSPI_INT_MASK_REG);
+
+ bcm_hsspi_writel(bcm_hsspi_readl(HSSPI_GLOBAL_CTRL_REG) |
+ GLOBAL_CTRL_CLK_GATE_SSOFF,
+ HSSPI_GLOBAL_CTRL_REG);
+
+ ret = request_irq(irq, bcm63xx_hsspi_interrupt, IRQF_SHARED, pdev->name,
+ master);
+
+ if (ret)
+ goto out_destroy_workqueue;
+
+ spin_lock(&bs->lock);
+ bs->irq = irq;
+ spin_unlock(&bs->lock);
+
+ /* register and we are done */
+ ret = spi_register_master(master);
+ if (ret)
+ goto out_free_irq;
+
+ return 0;
+
+out_free_irq:
+ free_irq(bs->irq, master);
+out_destroy_workqueue:
+ flush_workqueue(bs->workqueue);
+ destroy_workqueue(bs->workqueue);
+ iounmap(bs->regs);
+out_put_master:
+ spi_master_put(master);
+out_disable_clk:
+ clk_disable(clk);
+ clk_put(clk);
+out_release:
+ release_mem_region(res_mem->start, resource_size(res_mem));
+
+ return ret;
+}
+
+
+static int __exit bcm63xx_hsspi_remove(struct platform_device *pdev)
+{
+ struct spi_master *master = platform_get_drvdata(pdev);
+ struct bcm63xx_hsspi *bs = spi_master_get_devdata(master);
+ struct spi_message *msg;
+
+ cancel_work_sync(&bs->ws);
+
+ /* reset the hardware and block queue progress */
+ bcm_hsspi_writel(0, HSSPI_INT_MASK_REG);
+
+ spin_lock(&bs->lock);
+ /* HW shutdown */
+ bs->stopping = 1;
+ spin_unlock(&bs->lock);
+
+
+ /* Terminate remaining queued transfers */
+ list_for_each_entry(msg, &bs->queue, queue) {
+ msg->status = -ESHUTDOWN;
+ msg->complete(msg->context);
+ }
+
+
+ free_irq(bs->irq, master);
+ flush_workqueue(bs->workqueue);
+ destroy_workqueue(bs->workqueue);
+
+ clk_disable(bs->clk);
+ clk_put(bs->clk);
+
+ spi_unregister_master(master);
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int bcm63xx_hsspi_suspend(struct platform_device *pdev,
+ pm_message_t mesg)
+{
+ struct spi_master *master = platform_get_drvdata(pdev);
+ struct bcm63xx_hsspi *bs = spi_master_get_devdata(master);
+
+ clk_disable(bs->clk);
+
+ return 0;
+}
+
+static int bcm63xx_hsspi_resume(struct platform_device *pdev)
+{
+ struct spi_master *master = platform_get_drvdata(pdev);
+ struct bcm63xx_hsspi *bs = spi_master_get_devdata(master);
+
+ clk_enable(bs->clk);
+
+ return 0;
+}
+
+static const struct dev_pm_ops bcm63xx_hsspi_pm_ops = {
+ .suspend = bcm63xx_hsspi_suspend,
+ .resume = bcm63xx_hsspi_resume,
+};
+
+#define BCM63XX_HSSPI_PM_OPS (&bcm63xx_hsspi_pm_ops)
+#else
+#define BCM63XX_HSSPI_PM_OPS NULL
+#endif
+
+
+
+static struct platform_driver bcm63xx_hsspi_driver = {
+ .driver = {
+ .name = "bcm63xx-hsspi",
+ .owner = THIS_MODULE,
+ .pm = BCM63XX_HSSPI_PM_OPS,
+ },
+ .probe = bcm63xx_hsspi_probe,
+ .remove = __exit_p(bcm63xx_hsspi_remove),
+};
+
+module_platform_driver(bcm63xx_hsspi_driver);
+
+MODULE_ALIAS("platform:bcm63xx_hsspi");
+MODULE_DESCRIPTION("Broadcom BCM63xx HS SPI Controller driver");
+MODULE_AUTHOR("Jonas Gorski <jonas.gorski@gmail.com>");
+MODULE_LICENSE("GPL");

89
target/linux/brcm63xx/patches-3.3/420-MIPS-BCM63XX-Register-SPI-flash-if-present.patch Normal file
View file

@ -0,0 +1,89 @@
From a1e3ef9af3e3a7283ced5fd079ef7e8bc4e2deca Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jonas.gorski@gmail.com>
Date: Sun, 3 Jul 2011 15:00:38 +0200
Subject: [PATCH 55/79] MIPS: BCM63XX: Register SPI flash if present
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
---
arch/mips/bcm63xx/dev-flash.c | 29 +++++++++++++++++++--
arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 1 +
2 files changed, 28 insertions(+), 2 deletions(-)
--- a/arch/mips/bcm63xx/dev-flash.c
+++ b/arch/mips/bcm63xx/dev-flash.c
@@ -15,9 +15,12 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
#include <bcm63xx_cpu.h>
#include <bcm63xx_dev_flash.h>
+#include <bcm63xx_dev_hsspi.h>
#include <bcm63xx_regs.h>
#include <bcm63xx_io.h>
@@ -54,12 +57,28 @@ static struct platform_device mtd_dev =
},
};
+static struct flash_platform_data bcm63xx_flash_data = {
+ .part_probe_types = bcm63xx_part_types,
+};
+
+static struct spi_board_info bcm63xx_spi_flash_info[] = {
+ {
+ .bus_num = 0,
+ .chip_select = 0,
+ .mode = 0,
+ .max_speed_hz = 781000,
+ .modalias = "m25p80",
+ .platform_data = &bcm63xx_flash_data,
+ },
+};
+
static int __init bcm63xx_detect_flash_type(void)
{
u32 val;
switch (bcm63xx_get_cpu_id()) {
case BCM6328_CPU_ID:
+ bcm63xx_spi_flash_info[0].max_speed_hz = 40000000;
val = bcm_misc_readl(MISC_STRAPBUS_6328_REG);
if (val & STRAPBUS_6328_BOOT_SEL_SERIAL)
return BCM63XX_FLASH_TYPE_SERIAL;
@@ -78,6 +97,9 @@ static int __init bcm63xx_detect_flash_t
return BCM63XX_FLASH_TYPE_SERIAL;
case BCM6368_CPU_ID:
val = bcm_gpio_readl(GPIO_STRAPBUS_REG);
+ if (val & STRAPBUS_6368_SPI_CLK_FAST)
+ bcm63xx_spi_flash_info[0].max_speed_hz = 20000000;
+
switch (val & STRAPBUS_6368_BOOT_SEL_MASK) {
case STRAPBUS_6368_BOOT_SEL_NAND:
return BCM63XX_FLASH_TYPE_NAND;
@@ -109,8 +131,11 @@ int __init bcm63xx_flash_register(void)
return platform_device_register(&mtd_dev);
case BCM63XX_FLASH_TYPE_SERIAL:
- pr_warn("unsupported serial flash detected\n");
- return -ENODEV;
+ if (BCMCPU_IS_6328())
+ bcm63xx_flash_data.max_transfer_len = HS_SPI_BUFFER_LEN;
+
+ return spi_register_board_info(bcm63xx_spi_flash_info,
+ ARRAY_SIZE(bcm63xx_spi_flash_info));
case BCM63XX_FLASH_TYPE_NAND:
pr_warn("unsupported NAND flash detected\n");
return -ENODEV;
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
@@ -555,6 +555,7 @@
#define GPIO_STRAPBUS_REG 0x40
#define STRAPBUS_6358_BOOT_SEL_PARALLEL (1 << 1)
#define STRAPBUS_6358_BOOT_SEL_SERIAL (0 << 1)
+#define STRAPBUS_6368_SPI_CLK_FAST (1 << 6)
#define STRAPBUS_6368_BOOT_SEL_MASK 0x3
#define STRAPBUS_6368_BOOT_SEL_NAND 0
#define STRAPBUS_6368_BOOT_SEL_SERIAL 1

4
target/linux/brcm63xx/patches-3.3/500-board-D4PW.patch
View file

@ -1,6 +1,6 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -130,6 +130,55 @@ static struct board_info __initdata boar @@ -131,6 +131,55 @@ static struct board_info __initdata boar
}, },
}, },
}; };
@ -56,7 +56,7 @@
#endif #endif
/* /*
@@ -638,6 +687,7 @@ static const struct board_info __initdat @@ -639,6 +688,7 @@ static const struct board_info __initdat
&board_DV201AMR, &board_DV201AMR,
&board_96348gw_a, &board_96348gw_a,
&board_rta1025w_16, &board_rta1025w_16,

8
target/linux/brcm63xx/patches-3.3/501-board-NB4.patch
View file

@ -10,7 +10,7 @@
#include <asm/addrspace.h> #include <asm/addrspace.h>
#include <bcm63xx_board.h> #include <bcm63xx_board.h>
#include <bcm63xx_cpu.h> #include <bcm63xx_cpu.h>
@@ -39,6 +42,12 @@ @@ -40,6 +43,12 @@
#define CFE_OFFSET_64K 0x10000 #define CFE_OFFSET_64K 0x10000
#define CFE_OFFSET_128K 0x20000 #define CFE_OFFSET_128K 0x20000
@ -23,7 +23,7 @@
static struct bcm963xx_nvram nvram; static struct bcm963xx_nvram nvram;
static unsigned int mac_addr_used; static unsigned int mac_addr_used;
static struct board_info board; static struct board_info board;
@@ -665,6 +674,496 @@ static struct board_info __initdata boar @@ -666,6 +675,496 @@ static struct board_info __initdata boar
.has_ohci0 = 1, .has_ohci0 = 1,
}; };
@ -520,7 +520,7 @@
#endif #endif
/* /*
@@ -695,9 +1194,30 @@ static const struct board_info __initdat @@ -696,9 +1195,30 @@ static const struct board_info __initdat
&board_96358vw2, &board_96358vw2,
&board_AGPFS0, &board_AGPFS0,
&board_DWVS0, &board_DWVS0,
@ -551,7 +551,7 @@
/* /*
* Register a sane SPROMv2 to make the on-board * Register a sane SPROMv2 to make the on-board
* bcm4318 WLAN work * bcm4318 WLAN work
@@ -853,6 +1373,9 @@ void __init board_prom_init(void) @@ -854,6 +1374,9 @@ void __init board_prom_init(void)
boardid_fixup(boot_addr); boardid_fixup(boot_addr);
} }

4
target/linux/brcm63xx/patches-3.3/502-board-96338W2_E7T.patch
View file

@ -1,6 +1,6 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -200,6 +200,38 @@ static struct board_info __initdata boar @@ -201,6 +201,38 @@ static struct board_info __initdata boar
.has_uart0 = 1, .has_uart0 = 1,
}; };
@ -39,7 +39,7 @@
#endif #endif
/* /*
@@ -1173,6 +1205,7 @@ static const struct board_info __initdat @@ -1174,6 +1206,7 @@ static const struct board_info __initdat
#ifdef CONFIG_BCM63XX_CPU_6338 #ifdef CONFIG_BCM63XX_CPU_6338
&board_96338gw, &board_96338gw,
&board_96338w, &board_96338w,

4
target/linux/brcm63xx/patches-3.3/503-board-CPVA642.patch
View file

@ -1,6 +1,6 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -663,6 +663,98 @@ static struct board_info __initdata boar @@ -664,6 +664,98 @@ static struct board_info __initdata boar
}, },
}; };
@ -99,7 +99,7 @@
static struct board_info __initdata board_AGPFS0 = { static struct board_info __initdata board_AGPFS0 = {
.name = "AGPF-S0", .name = "AGPF-S0",
.expected_cpu_id = 0x6358, .expected_cpu_id = 0x6358,
@@ -1226,6 +1318,7 @@ static const struct board_info __initdat @@ -1227,6 +1319,7 @@ static const struct board_info __initdat
&board_96358vw, &board_96358vw,
&board_96358vw2, &board_96358vw2,
&board_AGPFS0, &board_AGPFS0,

4
target/linux/brcm63xx/patches-3.3/504-board_dsl_274xb_rev_c.patch
View file

@ -1,6 +1,6 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -799,6 +799,59 @@ static struct board_info __initdata boar @@ -800,6 +800,59 @@ static struct board_info __initdata boar
.has_ohci0 = 1, .has_ohci0 = 1,
}; };
@ -60,7 +60,7 @@
struct spi_gpio_platform_data nb4_spi_gpio_data = { struct spi_gpio_platform_data nb4_spi_gpio_data = {
.sck = NB4_SPI_GPIO_CLK, .sck = NB4_SPI_GPIO_CLK,
.mosi = NB4_SPI_GPIO_MOSI, .mosi = NB4_SPI_GPIO_MOSI,
@@ -1320,6 +1373,7 @@ static const struct board_info __initdat @@ -1321,6 +1374,7 @@ static const struct board_info __initdat
&board_AGPFS0, &board_AGPFS0,
&board_CPVA642, &board_CPVA642,
&board_DWVS0, &board_DWVS0,

4
target/linux/brcm63xx/patches-3.3/505-board_spw500v.patch
View file

@ -1,6 +1,6 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -188,6 +188,67 @@ static struct board_info __initdata boar @@ -189,6 +189,67 @@ static struct board_info __initdata boar
}, },
}; };
@ -68,7 +68,7 @@
#endif #endif
/* /*
@@ -1365,6 +1426,7 @@ static const struct board_info __initdat @@ -1366,6 +1427,7 @@ static const struct board_info __initdat
&board_96348gw_a, &board_96348gw_a,
&board_rta1025w_16, &board_rta1025w_16,
&board_96348_D4PW, &board_96348_D4PW,

4
target/linux/brcm63xx/patches-3.3/506-board_gw6200_gw6000.patch
View file

@ -1,6 +1,6 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -535,6 +535,112 @@ static struct board_info __initdata boar @@ -536,6 +536,112 @@ static struct board_info __initdata boar
}, },
}; };
@ -113,7 +113,7 @@
static struct board_info __initdata board_FAST2404 = { static struct board_info __initdata board_FAST2404 = {
.name = "F@ST2404", .name = "F@ST2404",
.expected_cpu_id = 0x6348, .expected_cpu_id = 0x6348,
@@ -1419,6 +1525,8 @@ static const struct board_info __initdat @@ -1420,6 +1526,8 @@ static const struct board_info __initdat
#ifdef CONFIG_BCM63XX_CPU_6348 #ifdef CONFIG_BCM63XX_CPU_6348
&board_96348r, &board_96348r,
&board_96348gw, &board_96348gw,

4
target/linux/brcm63xx/patches-3.3/507-board-MAGIC.patch
View file

@ -1,6 +1,6 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -249,6 +249,76 @@ static struct board_info __initdata boar @@ -250,6 +250,76 @@ static struct board_info __initdata boar
}, },
}; };
@ -77,7 +77,7 @@
#endif #endif
/* /*
@@ -1535,6 +1605,7 @@ static const struct board_info __initdat @@ -1536,6 +1606,7 @@ static const struct board_info __initdat
&board_rta1025w_16, &board_rta1025w_16,
&board_96348_D4PW, &board_96348_D4PW,
&board_spw500v, &board_spw500v,

4
target/linux/brcm63xx/patches-3.3/508-board_hw553.patch
View file

@ -1,6 +1,6 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -1578,6 +1578,81 @@ static struct board_info __initdata boar @@ -1579,6 +1579,81 @@ static struct board_info __initdata boar
.spis = nb4_spi_devices, .spis = nb4_spi_devices,
.num_spis = ARRAY_SIZE(nb4_spi_devices), .num_spis = ARRAY_SIZE(nb4_spi_devices),
}; };
@ -82,7 +82,7 @@
#endif #endif
/* /*
@@ -1620,6 +1695,7 @@ static const struct board_info __initdat @@ -1621,6 +1696,7 @@ static const struct board_info __initdat
&board_nb4_ser_r2, &board_nb4_ser_r2,
&board_nb4_fxc_r1, &board_nb4_fxc_r1,
&board_nb4_fxc_r2, &board_nb4_fxc_r2,

4
target/linux/brcm63xx/patches-3.3/509-board_rta1320_16m.patch
View file

@ -1,6 +1,6 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -363,6 +363,43 @@ static struct board_info __initdata boar @@ -364,6 +364,43 @@ static struct board_info __initdata boar
}, },
}, },
}; };
@ -44,7 +44,7 @@
#endif #endif
/* /*
@@ -1663,6 +1700,7 @@ static const struct board_info __initdat @@ -1664,6 +1701,7 @@ static const struct board_info __initdat
&board_96338gw, &board_96338gw,
&board_96338w, &board_96338w,
&board_96338w2_e7t, &board_96338w2_e7t,

4
target/linux/brcm63xx/patches-3.3/510-board_spw303v.patch
View file

@ -1,6 +1,6 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -1690,6 +1690,72 @@ static struct board_info __initdata boar @@ -1691,6 +1691,72 @@ static struct board_info __initdata boar
}, },
}, },
}; };
@ -73,7 +73,7 @@
#endif #endif
/* /*
@@ -1734,6 +1800,7 @@ static const struct board_info __initdat @@ -1735,6 +1801,7 @@ static const struct board_info __initdat
&board_nb4_fxc_r1, &board_nb4_fxc_r1,
&board_nb4_fxc_r2, &board_nb4_fxc_r2,
&board_HW553, &board_HW553,

16
target/linux/brcm63xx/patches-3.3/511-board_V2500V.patch
View file

@ -1,6 +1,6 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -319,6 +319,63 @@ static struct board_info __initdata boar @@ -320,6 +320,63 @@ static struct board_info __initdata boar
}, },
}; };
@ -64,7 +64,7 @@
#endif #endif
/* /*
@@ -1785,6 +1842,7 @@ static const struct board_info __initdat @@ -1786,6 +1843,7 @@ static const struct board_info __initdat
&board_96348_D4PW, &board_96348_D4PW,
&board_spw500v, &board_spw500v,
&board_96348sv, &board_96348sv,
@ -72,7 +72,7 @@
#endif #endif
#ifdef CONFIG_BCM63XX_CPU_6358 #ifdef CONFIG_BCM63XX_CPU_6358
@@ -1943,6 +2001,22 @@ void __init board_prom_init(void) @@ -1944,6 +2002,22 @@ void __init board_prom_init(void)
val &= MPI_CSBASE_BASE_MASK; val &= MPI_CSBASE_BASE_MASK;
} }
boot_addr = (u8 *)KSEG1ADDR(val); boot_addr = (u8 *)KSEG1ADDR(val);
@ -97,15 +97,15 @@
cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET; cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET;
--- a/arch/mips/bcm63xx/dev-flash.c --- a/arch/mips/bcm63xx/dev-flash.c
+++ b/arch/mips/bcm63xx/dev-flash.c +++ b/arch/mips/bcm63xx/dev-flash.c
@@ -16,6 +16,7 @@ @@ -18,6 +18,7 @@
#include <linux/mtd/partitions.h> #include <linux/spi/spi.h>
#include <linux/mtd/physmap.h> #include <linux/spi/flash.h>
+#include <bcm63xx_board.h> +#include <bcm63xx_board.h>
#include <bcm63xx_cpu.h> #include <bcm63xx_cpu.h>
#include <bcm63xx_dev_flash.h> #include <bcm63xx_dev_flash.h>
#include <bcm63xx_regs.h> #include <bcm63xx_dev_hsspi.h>
@@ -104,6 +105,13 @@ int __init bcm63xx_flash_register(void) @@ -126,6 +127,13 @@ int __init bcm63xx_flash_register(void)
val = bcm_mpi_readl(MPI_CSBASE_REG(0)); val = bcm_mpi_readl(MPI_CSBASE_REG(0));
val &= MPI_CSBASE_BASE_MASK; val &= MPI_CSBASE_BASE_MASK;

4
target/linux/brcm63xx/patches-3.3/512-board_BTV2110.patch
View file

@ -1,6 +1,6 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -631,6 +631,62 @@ static struct board_info __initdata boar @@ -632,6 +632,62 @@ static struct board_info __initdata boar
}, },
}; };
@ -63,7 +63,7 @@
static struct board_info __initdata board_96348gw = { static struct board_info __initdata board_96348gw = {
.name = "96348GW", .name = "96348GW",
.expected_cpu_id = 0x6348, .expected_cpu_id = 0x6348,
@@ -1843,6 +1899,7 @@ static const struct board_info __initdat @@ -1844,6 +1900,7 @@ static const struct board_info __initdat
&board_spw500v, &board_spw500v,
&board_96348sv, &board_96348sv,
&board_V2500V_BB, &board_V2500V_BB,

4
target/linux/brcm63xx/patches-3.3/514-board_ct536_ct5621.patch
View file

@ -1,6 +1,6 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -687,6 +687,49 @@ static struct board_info __initdata boar @@ -688,6 +688,49 @@ static struct board_info __initdata boar
}; };
@ -50,7 +50,7 @@
static struct board_info __initdata board_96348gw = { static struct board_info __initdata board_96348gw = {
.name = "96348GW", .name = "96348GW",
.expected_cpu_id = 0x6348, .expected_cpu_id = 0x6348,
@@ -1900,6 +1943,7 @@ static const struct board_info __initdat @@ -1901,6 +1944,7 @@ static const struct board_info __initdat
&board_96348sv, &board_96348sv,
&board_V2500V_BB, &board_V2500V_BB,
&board_V2110, &board_V2110,

4
target/linux/brcm63xx/patches-3.3/515-board_DWV-S0_fixes.patch
View file

@ -1,6 +1,6 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -1212,6 +1212,8 @@ static struct board_info __initdata boar @@ -1213,6 +1213,8 @@ static struct board_info __initdata boar
.name = "DWV-S0", .name = "DWV-S0",
.expected_cpu_id = 0x6358, .expected_cpu_id = 0x6358,
@ -9,7 +9,7 @@
.has_enet0 = 1, .has_enet0 = 1,
.has_enet1 = 1, .has_enet1 = 1,
.has_pci = 1, .has_pci = 1,
@@ -1227,6 +1229,7 @@ static struct board_info __initdata boar @@ -1228,6 +1230,7 @@ static struct board_info __initdata boar
}, },
.has_ohci0 = 1, .has_ohci0 = 1,

4
target/linux/brcm63xx/patches-3.3/516-board_96348A-122.patch
View file

@ -1,6 +1,6 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -376,6 +376,67 @@ static struct board_info __initdata boar @@ -377,6 +377,67 @@ static struct board_info __initdata boar
}, },
}; };
@ -68,7 +68,7 @@
#endif #endif
/* /*
@@ -1947,6 +2008,7 @@ static const struct board_info __initdat @@ -1948,6 +2009,7 @@ static const struct board_info __initdat
&board_V2500V_BB, &board_V2500V_BB,
&board_V2110, &board_V2110,
&board_ct536_ct5621, &board_ct536_ct5621,

2
target/linux/brcm63xx/patches-3.3/517-RTA1205W_16_uart_fixes.patch
View file

@ -1,6 +1,6 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -993,6 +993,7 @@ static struct board_info __initdata boar @@ -994,6 +994,7 @@ static struct board_info __initdata boar
.name = "RTA1025W_16", .name = "RTA1025W_16",
.expected_cpu_id = 0x6348, .expected_cpu_id = 0x6348,

4
target/linux/brcm63xx/patches-3.3/519_board_CPVA502plus.patch
View file

@ -1,6 +1,6 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -437,6 +437,42 @@ static struct board_info __initdata boar @@ -438,6 +438,42 @@ static struct board_info __initdata boar
}, },
}; };
@ -43,7 +43,7 @@
#endif #endif
/* /*
@@ -2010,6 +2046,7 @@ static const struct board_info __initdat @@ -2011,6 +2047,7 @@ static const struct board_info __initdat
&board_V2110, &board_V2110,
&board_ct536_ct5621, &board_ct536_ct5621,
&board_96348A_122, &board_96348A_122,

6
target/linux/brcm63xx/patches-3.3/520-bcm63xx-add-support-for-96368MVWG-board.patch
View file

@ -10,7 +10,7 @@ Subject: [PATCH 32/63] bcm63xx: add support for 96368MVWG board.
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -2016,6 +2016,80 @@ static struct board_info __initdata boar @@ -2017,6 +2017,80 @@ static struct board_info __initdata boar
#endif #endif
/* /*
@ -91,7 +91,7 @@ Subject: [PATCH 32/63] bcm63xx: add support for 96368MVWG board.
* all boards * all boards
*/ */
static const struct board_info __initdata *bcm963xx_boards[] = { static const struct board_info __initdata *bcm963xx_boards[] = {
@@ -2064,6 +2138,10 @@ static const struct board_info __initdat @@ -2065,6 +2139,10 @@ static const struct board_info __initdat
&board_HW553, &board_HW553,
&board_spw303v, &board_spw303v,
#endif #endif
@ -102,7 +102,7 @@ Subject: [PATCH 32/63] bcm63xx: add support for 96368MVWG board.
}; };
static void __init nb4_nvram_fixup(void) static void __init nb4_nvram_fixup(void)
@@ -2285,12 +2363,25 @@ void __init board_prom_init(void) @@ -2286,12 +2364,25 @@ void __init board_prom_init(void)
if (board.has_pci) { if (board.has_pci) {
if (BCMCPU_IS_6348()) if (BCMCPU_IS_6348())
val |= GPIO_MODE_6348_G2_PCI; val |= GPIO_MODE_6348_G2_PCI;

4
target/linux/brcm63xx/patches-3.3/521-bcm63xx-add-support-for-96368MVNgr-board.patch
View file

@ -9,7 +9,7 @@ Subject: [PATCH 33/63] bcm63xx: add support for 96368MVNgr board.
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -2087,6 +2087,72 @@ static struct board_info __initdata boar @@ -2088,6 +2088,72 @@ static struct board_info __initdata boar
.has_ohci0 = 1, .has_ohci0 = 1,
.has_ehci0 = 1, .has_ehci0 = 1,
}; };
@ -82,7 +82,7 @@ Subject: [PATCH 33/63] bcm63xx: add support for 96368MVNgr board.
#endif #endif
/* /*
@@ -2141,6 +2207,7 @@ static const struct board_info __initdat @@ -2142,6 +2208,7 @@ static const struct board_info __initdat
#ifdef CONFIG_BCM63XX_CPU_6368 #ifdef CONFIG_BCM63XX_CPU_6368
&board_96368mvwg, &board_96368mvwg,

2
target/linux/brcm63xx/patches-3.3/550-alice_gate2_leds.patch
View file

@ -1,6 +1,6 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -1304,6 +1304,99 @@ static struct board_info __initdata boar @@ -1305,6 +1305,99 @@ static struct board_info __initdata boar
.has_ohci0 = 1, .has_ohci0 = 1,
.has_ehci0 = 1, .has_ehci0 = 1,

2
target/linux/brcm63xx/patches-3.3/551-96348gw_a_leds.patch
View file

@ -1,6 +1,6 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -1084,6 +1084,19 @@ static struct board_info __initdata boar @@ -1085,6 +1085,19 @@ static struct board_info __initdata boar
}, },
.has_ohci0 = 1, .has_ohci0 = 1,

2
target/linux/brcm63xx/patches-3.3/552-board_96348gw-10_reset_button.patch
View file

@ -1,6 +1,6 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -662,6 +662,17 @@ static struct board_info __initdata boar @@ -663,6 +663,17 @@ static struct board_info __initdata boar
.active_low = 1, .active_low = 1,
}, },
}, },

4
target/linux/brcm63xx/patches-3.3/800-wl_exports.patch
View file

@ -8,7 +8,7 @@
#include <linux/spi/spi.h> #include <linux/spi/spi.h>
#include <linux/spi/spi_gpio.h> #include <linux/spi/spi_gpio.h>
#include <linux/spi/74x164.h> #include <linux/spi/74x164.h>
@@ -53,6 +54,13 @@ static unsigned int mac_addr_used; @@ -54,6 +55,13 @@ static unsigned int mac_addr_used;
static struct board_info board; static struct board_info board;
/* /*
@ -22,7 +22,7 @@
* known 6338 boards * known 6338 boards
*/ */
#ifdef CONFIG_BCM63XX_CPU_6338 #ifdef CONFIG_BCM63XX_CPU_6338
@@ -2495,6 +2503,7 @@ void __init board_prom_init(void) @@ -2496,6 +2504,7 @@ void __init board_prom_init(void)
/* extract nvram data */ /* extract nvram data */
memcpy(&nvram, boot_addr + BCM963XX_NVRAM_OFFSET, sizeof(nvram)); memcpy(&nvram, boot_addr + BCM963XX_NVRAM_OFFSET, sizeof(nvram));

4
target/linux/brcm63xx/patches-3.3/801-ssb_export_fallback_sprom.patch
View file

@ -1,6 +1,6 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -2357,7 +2357,7 @@ static void __init nb4_nvram_fixup(void) @@ -2358,7 +2358,7 @@ static void __init nb4_nvram_fixup(void)
* bcm4318 WLAN work * bcm4318 WLAN work
*/ */
#ifdef CONFIG_SSB_PCIHOST #ifdef CONFIG_SSB_PCIHOST
@ -9,7 +9,7 @@
.revision = 0x02, .revision = 0x02,
.board_rev = 0x17, .board_rev = 0x17,
.country_code = 0x0, .country_code = 0x0,
@@ -2377,6 +2377,7 @@ static struct ssb_sprom bcm63xx_sprom = @@ -2378,6 +2378,7 @@ static struct ssb_sprom bcm63xx_sprom =
.boardflags_lo = 0x2848, .boardflags_lo = 0x2848,
.boardflags_hi = 0x0000, .boardflags_hi = 0x0000,
}; };