at91: drop v3.18

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 48354

target/linux/at91/config-3.18

@@ -1,230 +0,0 @@
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARM=y
-CONFIG_ARM_APPENDED_DTB=y
-# CONFIG_ARM_ATAG_DTB_COMPAT is not set
-# CONFIG_ARM_CPU_SUSPEND is not set
-CONFIG_ARM_NR_BANKS=8
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_THUMB=y
-CONFIG_AT91SAM9X_WATCHDOG=y
-CONFIG_AT91_PMC_UNIT=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_AT91_SAM9G45_RESET=y
-CONFIG_AT91_SAM9_ALT_RESET=y
-CONFIG_AT91_SAM9_TIME=y
-CONFIG_AT91_TIMER_HZ=100
-CONFIG_ATAGS=y
-# CONFIG_ATMEL_TCLIB is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CACHE_L2X0 is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_CPU_USE_DOMAINS=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-# CONFIG_DEBUG_PINCTRL is not set
-# CONFIG_DEBUG_USER is not set
-CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
-CONFIG_DTC=y
-CONFIG_EXT4_FS=y
-CONFIG_FRAME_POINTER=y
-CONFIG_FS_MBCACHE=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_AT91_DBGU0=y
-CONFIG_HAVE_AT91_DBGU1=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_BPF_JIT=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FB_ATMEL=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_HAVE_KERNEL_XZ=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_WORK=y
-# CONFIG_ISDN is not set
-CONFIG_JBD2=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_KTIME_SCALAR=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_M25PXX_PREFER_SMALL_SECTOR_ERASE=y
-CONFIG_M25PXX_USE_FAST_READ=y
-CONFIG_MACB=y
-CONFIG_MACH_AT91SAM9_DT=y
-CONFIG_MDIO_BOARDINFO=y
-# CONFIG_MII is not set
-CONFIG_MICREL_PHY=y
-CONFIG_MMC=y
-CONFIG_MMC_ATMELMCI=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_DATAFLASH_OTP is not set
-# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_OF_PARTS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_SM_COMMON is not set
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-# CONFIG_MTD_UBI_BLOCK is not set
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MULTI_IRQ_HANDLER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_KUSER_HELPERS=y
-CONFIG_NEED_MACH_GPIO_H=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NLS=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
-CONFIG_OF_NET=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PCI_SYSCALL is not set
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-CONFIG_PINCONF=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_AT91=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PINMUX=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_AT91_POWEROFF=y
-CONFIG_POWER_RESET_AT91_RESET=y
-# CONFIG_POWER_RESET_GPIO is not set
-# CONFIG_POWER_RESET_GPIO_RESTART is not set
-# CONFIG_POWER_RESET_LTC2952 is not set
-# CONFIG_POWER_RESET_SYSCON is not set
-# CONFIG_PL310_ERRATA_588369 is not set
-# CONFIG_PL310_ERRATA_727915 is not set
-# CONFIG_PL310_ERRATA_753970 is not set
-# CONFIG_PL310_ERRATA_769419 is not set
-# CONFIG_PREEMPT_RCU is not set
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_RCU_STALL_COMMON is not set
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_DRV_AT91RM9200 is not set
-# CONFIG_RTC_DRV_AT91SAM9 is not set
-# CONFIG_RTC_DRV_CMOS is not set
-CONFIG_SCHED_HRTICK=y
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_SPIDEV=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_STAGING is not set
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_UBIFS_FS_LZO=y
-# CONFIG_UBIFS_FS_XZ is not set
-CONFIG_UBIFS_FS_ZLIB=y
-CONFIG_UID16=y
-CONFIG_UIDGID_CONVERTED=y
-CONFIG_UNCOMPRESS_INCLUDE="mach/uncompress.h"
-# CONFIG_USB_ARCH_HAS_XHCI is not set
-# CONFIG_USB_ATMEL_USBA is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_VECTORS_BASE=0xffff0000
-# CONFIG_VFP is not set
-CONFIG_WATCHDOG_CORE=y
-# CONFIG_WLAN is not set
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZONE_DMA_FLAG=0

target/linux/at91/patches-3.18/100-ARM-at91-build-dtb-for-LMU5000.patch

@@ -1,10 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -28,6 +28,7 @@ dtb-$(CONFIG_ARCH_AT91) += usb_a9g20.dtb
- dtb-$(CONFIG_ARCH_AT91) += usb_a9g20_lpw.dtb
- # sam9g45
- dtb-$(CONFIG_ARCH_AT91) += at91sam9m10g45ek.dtb
-+dtb-$(CONFIG_ARCH_AT91) += lmu5000.dtb
- dtb-$(CONFIG_ARCH_AT91) += pm9g45.dtb
- # sam9n12
- dtb-$(CONFIG_ARCH_AT91) += at91sam9n12ek.dtb

target/linux/at91/patches-3.18/101-ARM-at91-build-dtb-for-q5xr5.patch

@@ -1,10 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -20,6 +20,7 @@ dtb-$(CONFIG_ARCH_AT91) += tny_a9263.dtb
- dtb-$(CONFIG_ARCH_AT91) += usb_a9263.dtb
- # sam9g20
- dtb-$(CONFIG_ARCH_AT91) += at91-foxg20.dtb
-+dtb-$(CONFIG_ARCH_AT91) += at91-q5xr5.dtb
- dtb-$(CONFIG_ARCH_AT91) += at91sam9g20ek.dtb
- dtb-$(CONFIG_ARCH_AT91) += at91sam9g20ek_2mmc.dtb
- dtb-$(CONFIG_ARCH_AT91) += kizbox.dtb

target/linux/at91/patches-3.18/200-ARM-at91-udc-clockfix-backport.patch

@@ -1,82 +0,0 @@
---- a/drivers/usb/gadget/udc/at91_udc.c
-+++ b/drivers/usb/gadget/udc/at91_udc.c
-@@ -870,8 +870,6 @@ static void clk_on(struct at91_udc *udc)
- 		return;
- 	udc->clocked = 1;
- 
--	if (IS_ENABLED(CONFIG_COMMON_CLK))
--		clk_enable(udc->uclk);
- 	clk_enable(udc->iclk);
- 	clk_enable(udc->fclk);
- }
-@@ -884,8 +882,6 @@ static void clk_off(struct at91_udc *udc
- 	udc->gadget.speed = USB_SPEED_UNKNOWN;
- 	clk_disable(udc->fclk);
- 	clk_disable(udc->iclk);
--	if (IS_ENABLED(CONFIG_COMMON_CLK))
--		clk_disable(udc->uclk);
- }
- 
- /*
-@@ -1766,27 +1762,18 @@ static int at91udc_probe(struct platform
- 	udc_reinit(udc);
- 
- 	/* get interface and function clocks */
--	udc->iclk = clk_get(dev, "udc_clk");
--	udc->fclk = clk_get(dev, "udpck");
--	if (IS_ENABLED(CONFIG_COMMON_CLK))
--		udc->uclk = clk_get(dev, "usb_clk");
--	if (IS_ERR(udc->iclk) || IS_ERR(udc->fclk) ||
--	    (IS_ENABLED(CONFIG_COMMON_CLK) && IS_ERR(udc->uclk))) {
-+	udc->iclk = clk_get(dev, "pclk");
-+	udc->fclk = clk_get(dev, "hclk");
-+	if (IS_ERR(udc->iclk) || IS_ERR(udc->fclk)) {
- 		DBG("clocks missing\n");
- 		retval = -ENODEV;
- 		goto fail1;
- 	}
- 
--	/* don't do anything until we have both gadget driver and VBUS */
--	if (IS_ENABLED(CONFIG_COMMON_CLK)) {
--		clk_set_rate(udc->uclk, 48000000);
--		retval = clk_prepare(udc->uclk);
--		if (retval)
--			goto fail1;
--	}
-+	clk_set_rate(udc->fclk, 48000000);
- 	retval = clk_prepare(udc->fclk);
- 	if (retval)
--		goto fail1a;
-+		goto fail1;
- 
- 	retval = clk_prepare_enable(udc->iclk);
- 	if (retval)
-@@ -1860,12 +1847,7 @@ fail1c:
- 	clk_unprepare(udc->iclk);
- fail1b:
- 	clk_unprepare(udc->fclk);
--fail1a:
--	if (IS_ENABLED(CONFIG_COMMON_CLK))
--		clk_unprepare(udc->uclk);
- fail1:
--	if (IS_ENABLED(CONFIG_COMMON_CLK) && !IS_ERR(udc->uclk))
--		clk_put(udc->uclk);
- 	if (!IS_ERR(udc->fclk))
- 		clk_put(udc->fclk);
- 	if (!IS_ERR(udc->iclk))
-@@ -1911,15 +1893,11 @@ static int __exit at91udc_remove(struct
- 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- 	release_mem_region(res->start, resource_size(res));
- 
--	if (IS_ENABLED(CONFIG_COMMON_CLK))
--		clk_unprepare(udc->uclk);
- 	clk_unprepare(udc->fclk);
- 	clk_unprepare(udc->iclk);
- 
- 	clk_put(udc->iclk);
- 	clk_put(udc->fclk);
--	if (IS_ENABLED(CONFIG_COMMON_CLK))
--		clk_put(udc->uclk);
- 
- 	return 0;
- }

target/linux/at91/patches-3.18/201-ARM-at91-usb-determine_rate-backport.patch

@@ -1,20 +0,0 @@
---- a/drivers/clk/at91/clk-usb.c
-+++ b/drivers/clk/at91/clk-usb.c
-@@ -59,7 +59,7 @@ static unsigned long at91sam9x5_clk_usb_
- static long at91sam9x5_clk_usb_determine_rate(struct clk_hw *hw,
- 					      unsigned long rate,
- 					      unsigned long *best_parent_rate,
--					      struct clk_hw **best_parent_hw)
-+					      struct clk **best_parent_clk)
- {
- 	struct clk *parent = NULL;
- 	long best_rate = -EINVAL;
-@@ -91,7 +91,7 @@ static long at91sam9x5_clk_usb_determine
- 				best_rate = tmp_rate;
- 				best_diff = tmp_diff;
- 				*best_parent_rate = tmp_parent_rate;
--				*best_parent_hw = __clk_get_hw(parent);
-+				*best_parent_clk = parent;
- 			}
- 
- 			if (!best_diff || tmp_rate < rate)

target/linux/at91/patches-3.18/805-free_some_portc_pins.patch

@@ -1,11 +0,0 @@
---- a/arch/arm/mach-at91/at91sam9260_devices.c
-+++ b/arch/arm/mach-at91/at91sam9260_devices.c
-@@ -507,7 +507,7 @@ static struct platform_device at91sam926
- 	.num_resources	= ARRAY_SIZE(spi1_resources),
- };
- 
--static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PC5, AT91_PIN_PC4, AT91_PIN_PC3 };
-+static const unsigned spi1_standard_cs[2] = { AT91_PIN_PB3, AT91_PIN_PC5 };
- 
- void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
- {

target/linux/at91/patches-3.18/901-AT91-flexibity-default-leds-to-heartbeat.patch

@@ -1,60 +0,0 @@
---- a/arch/arm/mach-at91/board-flexibity.c
-+++ b/arch/arm/mach-at91/board-flexibity.c
-@@ -90,49 +90,49 @@ static struct gpio_led flexibity_leds[]
- 		.name			= "usb1:green",
- 		.gpio			= AT91_PIN_PA12,
- 		.active_low		= 1,
--		.default_trigger	= "default-on",
-+		.default_trigger	= "heartbeat",
- 	},
- 	{
- 		.name			= "usb1:red",
- 		.gpio			= AT91_PIN_PA13,
- 		.active_low		= 1,
--		.default_trigger	= "default-on",
-+		.default_trigger	= "heartbeat",
- 	},
- 	{
- 		.name			= "usb2:green",
- 		.gpio			= AT91_PIN_PB26,
- 		.active_low		= 1,
--		.default_trigger	= "default-on",
-+		.default_trigger	= "heartbeat",
- 	},
- 	{
- 		.name			= "usb2:red",
- 		.gpio			= AT91_PIN_PB27,
- 		.active_low		= 1,
--		.default_trigger	= "default-on",
-+		.default_trigger	= "heartbeat",
- 	},
- 	{
- 		.name			= "usb3:green",
- 		.gpio			= AT91_PIN_PC8,
- 		.active_low		= 1,
--		.default_trigger	= "default-on",
-+		.default_trigger	= "heartbeat",
- 	},
- 	{
- 		.name			= "usb3:red",
- 		.gpio			= AT91_PIN_PC6,
- 		.active_low		= 1,
--		.default_trigger	= "default-on",
-+		.default_trigger	= "heartbeat",
- 	},
- 	{
- 		.name			= "usb4:green",
- 		.gpio			= AT91_PIN_PB4,
- 		.active_low		= 1,
--		.default_trigger	= "default-on",
-+		.default_trigger	= "heartbeat",
- 	},
- 	{
- 		.name			= "usb4:red",
- 		.gpio			= AT91_PIN_PB5,
- 		.active_low		= 1,
--		.default_trigger	= "default-on",
-+		.default_trigger	= "heartbeat",
- 	}
- };
-