From dc2d62d3ace206ae37928e62576729f7abc3f30c Mon Sep 17 00:00:00 2001 From: Luka Perkov Date: Sat, 14 Jul 2012 23:54:20 +0000 Subject: [PATCH] uboot-kirkwood: update to 2012.04.01 iConnect board tested by: Tim Fletcher Wojciech Dubowik DockStar board tested by: Martin Mueller RaidSonic ICY BOX NAS6210 board tested by: Luka Perkov SheevaPlug was not tested but support for SheevaPlug is taken from upstream uboot and it is not reported to be broken there. SVN-Revision: 32717 --- package/uboot-kirkwood/Makefile | 29 +- .../files/board/Marvell/dockstar/Makefile | 51 - .../files/board/Marvell/dockstar/config.mk | 28 - .../files/board/Marvell/dockstar/dockstar.c | 155 ---- .../files/board/Marvell/dockstar/dockstar.h | 41 - .../files/board/Marvell/dockstar/kwbimage.cfg | 162 ---- .../files/board/Marvell/iconnect/config.mk | 28 - .../files/board/Marvell/iconnect/kwbimage.cfg | 162 ---- .../{Marvell => iomega}/iconnect/Makefile | 16 +- .../{Marvell => iomega}/iconnect/iconnect.c | 46 +- .../{Marvell => iomega}/iconnect/iconnect.h | 12 +- .../files/board/iomega/iconnect/kwbimage.cfg | 165 ++++ .../files/include/configs/dockstar.h | 198 ---- .../files/include/configs/iconnect.h | 381 +------- .../uboot-kirkwood/patches/0001-ib62x0.patch | 542 +++++++++++ .../uboot-kirkwood/patches/0002-kwboot.patch | 873 ++++++++++++++++++ .../uboot-kirkwood/patches/0003-ide_bus.patch | 17 + .../uboot-kirkwood/patches/010-dockstar.patch | 10 - .../uboot-kirkwood/patches/020-iconnect.patch | 10 - .../uboot-kirkwood/patches/100-iconnect.patch | 10 + .../uboot-kirkwood/patches/110-dockstar.patch | 35 + 21 files changed, 1720 insertions(+), 1251 deletions(-) delete mode 100644 package/uboot-kirkwood/files/board/Marvell/dockstar/Makefile delete mode 100644 package/uboot-kirkwood/files/board/Marvell/dockstar/config.mk delete mode 100644 package/uboot-kirkwood/files/board/Marvell/dockstar/dockstar.c delete mode 100644 package/uboot-kirkwood/files/board/Marvell/dockstar/dockstar.h delete mode 100644 package/uboot-kirkwood/files/board/Marvell/dockstar/kwbimage.cfg delete mode 100644 package/uboot-kirkwood/files/board/Marvell/iconnect/config.mk delete mode 100644 package/uboot-kirkwood/files/board/Marvell/iconnect/kwbimage.cfg rename package/uboot-kirkwood/files/board/{Marvell => iomega}/iconnect/Makefile (76%) rename package/uboot-kirkwood/files/board/{Marvell => iomega}/iconnect/iconnect.c (77%) rename package/uboot-kirkwood/files/board/{Marvell => iomega}/iconnect/iconnect.h (77%) create mode 100644 package/uboot-kirkwood/files/board/iomega/iconnect/kwbimage.cfg delete mode 100644 package/uboot-kirkwood/files/include/configs/dockstar.h create mode 100644 package/uboot-kirkwood/patches/0001-ib62x0.patch create mode 100644 package/uboot-kirkwood/patches/0002-kwboot.patch create mode 100644 package/uboot-kirkwood/patches/0003-ide_bus.patch delete mode 100644 package/uboot-kirkwood/patches/010-dockstar.patch delete mode 100644 package/uboot-kirkwood/patches/020-iconnect.patch create mode 100644 package/uboot-kirkwood/patches/100-iconnect.patch create mode 100644 package/uboot-kirkwood/patches/110-dockstar.patch diff --git a/package/uboot-kirkwood/Makefile b/package/uboot-kirkwood/Makefile index cdf35a4caa..48bcf99661 100644 --- a/package/uboot-kirkwood/Makefile +++ b/package/uboot-kirkwood/Makefile @@ -1,5 +1,5 @@ # -# Copyright (C) 2010 OpenWrt.org +# Copyright (C) 2010-2012 OpenWrt.org # # This is free software, licensed under the GNU General Public License v2. # See /LICENSE for more information. @@ -9,13 +9,13 @@ include $(TOPDIR)/rules.mk include $(INCLUDE_DIR)/kernel.mk PKG_NAME:=u-boot -PKG_VERSION:=2010.09 +PKG_VERSION:=2012.04.01 PKG_RELEASE:=1 PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION) PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2 PKG_SOURCE_URL:=ftp://ftp.denx.de/pub/u-boot -PKG_MD5SUM:= +PKG_MD5SUM:=192bb231082d9159fb6e16de3039b6b2 PKG_TARGETS:=bin include $(INCLUDE_DIR)/package.mk @@ -27,18 +27,22 @@ define uboot/Default endef define uboot/sheevaplug - TITLE:=U-boot for the Sheevaplug + TITLE:=U-Boot for the SheevaPlug endef define uboot/dockstar - TITLE:=U-boot for the Seagate Dockstar + TITLE:=U-Boot for the Seagate DockStar endef define uboot/iconnect - TITLE:=U-boot for the Iomega iConnect Wireless + TITLE:=U-Boot for the Iomega iConnect Wireless endef -UBOOTS:=sheevaplug dockstar iconnect +define uboot/ib62x0 + TITLE:=U-Boot for the RaidSonic ICY BOX NAS6210 and NAS6220 +endef + +UBOOTS:=sheevaplug dockstar iconnect ib62x0 define Package/uboot/template define Package/uboot-kirkwood-$(1) @@ -51,13 +55,12 @@ define Package/uboot-kirkwood-$(1) endef endef -define BuildUbootPackage +define BuildUBootPackage $(eval $(uboot/Default)) $(eval $(uboot/$(1))) $(call Package/uboot/template,$(1),$(TITLE)) endef - ifdef BUILD_VARIANT $(eval $(call uboot/$(BUILD_VARIANT))) UBOOT_CONFIG:=$(if $(CONFIG),$(CONFIG),$(BUILD_VARIANT)) @@ -66,8 +69,7 @@ endif define Build/Prepare $(call Build/Prepare/Default) - $(CP) ./files/* $(PKG_BUILD_DIR) || true - find $(PKG_BUILD_DIR) -name .svn | $(XARGS) rm -rf + $(CP) ./files/* $(PKG_BUILD_DIR) endef define Build/Configure @@ -87,6 +89,9 @@ define Package/uboot/install/default $(BIN_DIR)/openwrt-$(BOARD)-$(1)-u-boot.bin $(CP) $(PKG_BUILD_DIR)/u-boot.kwb \ $(BIN_DIR)/openwrt-$(BOARD)-$(1)-u-boot.kwb + $(INSTALL_DIR) $(BIN_DIR)/u-boot-kwboot/ + $(CP) $(PKG_BUILD_DIR)/tools/kwboot \ + $(BIN_DIR)/u-boot-kwboot/ endef define Package/uboot/install/template @@ -100,6 +105,6 @@ $(foreach u,$(UBOOTS), \ ) $(foreach u,$(UBOOTS), \ - $(eval $(call BuildUbootPackage,$(u))) \ + $(eval $(call BuildUBootPackage,$(u))) \ $(eval $(call BuildPackage,uboot-kirkwood-$(u))) \ ) diff --git a/package/uboot-kirkwood/files/board/Marvell/dockstar/Makefile b/package/uboot-kirkwood/files/board/Marvell/dockstar/Makefile deleted file mode 100644 index da9d29ea1f..0000000000 --- a/package/uboot-kirkwood/files/board/Marvell/dockstar/Makefile +++ /dev/null @@ -1,51 +0,0 @@ -# -# (C) Copyright 2009 -# Marvell Semiconductor -# Written-by: Prafulla Wadaskar -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, -# MA 02110-1301 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).a - -COBJS := dockstar.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/package/uboot-kirkwood/files/board/Marvell/dockstar/config.mk b/package/uboot-kirkwood/files/board/Marvell/dockstar/config.mk deleted file mode 100644 index 176641260d..0000000000 --- a/package/uboot-kirkwood/files/board/Marvell/dockstar/config.mk +++ /dev/null @@ -1,28 +0,0 @@ -# -# (C) Copyright 2009 -# Marvell Semiconductor -# Written-by: Prafulla Wadaskar -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, -# MA 02110-1301 USA -# - -TEXT_BASE = 0x00800000 - -# Kirkwood Boot Image configuration file -KWD_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/kwbimage.cfg diff --git a/package/uboot-kirkwood/files/board/Marvell/dockstar/dockstar.c b/package/uboot-kirkwood/files/board/Marvell/dockstar/dockstar.c deleted file mode 100644 index 13cd3474b4..0000000000 --- a/package/uboot-kirkwood/files/board/Marvell/dockstar/dockstar.c +++ /dev/null @@ -1,155 +0,0 @@ -/* - * (C) Copyright 2009 - * Marvell Semiconductor - * Written-by: Prafulla Wadaskar - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include -#include -#include -#include -#include "dockstar.h" - -DECLARE_GLOBAL_DATA_PTR; - -int board_init(void) -{ - /* - * default gpio configuration - * There are maximum 64 gpios controlled through 2 sets of registers - * the below configuration configures mainly initial LED status - */ - kw_config_gpio(DOCKSTAR_OE_VAL_LOW, - DOCKSTAR_OE_VAL_HIGH, - DOCKSTAR_OE_LOW, DOCKSTAR_OE_HIGH); - - /* Multi-Purpose Pins Functionality configuration */ - u32 kwmpp_config[] = { - MPP0_NF_IO2, - MPP1_NF_IO3, - MPP2_NF_IO4, - MPP3_NF_IO5, - MPP4_NF_IO6, - MPP5_NF_IO7, - MPP6_SYSRST_OUTn, - MPP7_GPO, - MPP8_UART0_RTS, - MPP9_UART0_CTS, - MPP10_UART0_TXD, - MPP11_UART0_RXD, - MPP12_SD_CLK, - MPP13_SD_CMD, - MPP14_SD_D0, - MPP15_SD_D1, - MPP16_SD_D2, - MPP17_SD_D3, - MPP18_NF_IO0, - MPP19_NF_IO1, - MPP20_GPIO, - MPP21_GPIO, - MPP22_GPIO, - MPP23_GPIO, - MPP24_GPIO, - MPP25_GPIO, - MPP26_GPIO, - MPP27_GPIO, - MPP28_GPIO, - MPP29_TSMP9, - MPP30_GPIO, - MPP31_GPIO, - MPP32_GPIO, - MPP33_GPIO, - MPP34_GPIO, - MPP35_GPIO, - MPP36_GPIO, - MPP37_GPIO, - MPP38_GPIO, - MPP39_GPIO, - MPP40_GPIO, - MPP41_GPIO, - MPP42_GPIO, - MPP43_GPIO, - MPP44_GPIO, - MPP45_GPIO, - MPP46_GPIO, - MPP47_GPIO, - MPP48_GPIO, - MPP49_GPIO, - 0 - }; - kirkwood_mpp_conf(kwmpp_config); - - /* - * arch number of board - */ - gd->bd->bi_arch_number = MACH_TYPE_DOCKSTAR; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100; - - return 0; -} - -int dram_init(void) -{ - int i; - - for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { - gd->bd->bi_dram[i].start = kw_sdram_bar(i); - gd->bd->bi_dram[i].size = kw_sdram_bs(i); - } - return 0; -} - -#ifdef CONFIG_RESET_PHY_R -/* Configure and enable MV88E1116 PHY */ -void reset_phy(void) -{ - u16 reg; - u16 devadr; - char *name = "egiga0"; - - if (miiphy_set_current_dev(name)) - return; - - /* command to read PHY dev address */ - if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) { - printf("Err..%s could not read PHY dev address\n", - __FUNCTION__); - return; - } - - /* - * Enable RGMII delay on Tx and Rx for CPU port - * Ref: sec 4.7.2 of chip datasheet - */ - miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2); - miiphy_read(name, devadr, MV88E1116_MAC_CTRL_REG, ®); - reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL); - miiphy_write(name, devadr, MV88E1116_MAC_CTRL_REG, reg); - miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0); - - /* reset the phy */ - miiphy_reset(name, devadr); - - printf("88E1116 Initialized on %s\n", name); -} -#endif /* CONFIG_RESET_PHY_R */ diff --git a/package/uboot-kirkwood/files/board/Marvell/dockstar/dockstar.h b/package/uboot-kirkwood/files/board/Marvell/dockstar/dockstar.h deleted file mode 100644 index 33f8b1947c..0000000000 --- a/package/uboot-kirkwood/files/board/Marvell/dockstar/dockstar.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * (C) Copyright 2009 - * Marvell Semiconductor - * Written-by: Prafulla Wadaskar - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#ifndef __DOCKSTAR_H -#define __DOCKSTAR_H - -#define DOCKSTAR_OE_LOW (~(0)) -#define DOCKSTAR_OE_HIGH (~(0)) -#define DOCKSTAR_OE_VAL_LOW (1 << 29) /* USB_PWEN low */ -#define DOCKSTAR_OE_VAL_HIGH (1 << 17) /* LED pin high */ - -/* PHY related */ -#define MV88E1116_LED_FCTRL_REG 10 -#define MV88E1116_CPRSP_CR3_REG 21 -#define MV88E1116_MAC_CTRL_REG 21 -#define MV88E1116_PGADR_REG 22 -#define MV88E1116_RGMII_TXTM_CTRL (1 << 4) -#define MV88E1116_RGMII_RXTM_CTRL (1 << 5) - -#endif /* __DOCKSTAR_H */ diff --git a/package/uboot-kirkwood/files/board/Marvell/dockstar/kwbimage.cfg b/package/uboot-kirkwood/files/board/Marvell/dockstar/kwbimage.cfg deleted file mode 100644 index 3b9c53f57f..0000000000 --- a/package/uboot-kirkwood/files/board/Marvell/dockstar/kwbimage.cfg +++ /dev/null @@ -1,162 +0,0 @@ -# -# (C) Copyright 2009 -# Marvell Semiconductor -# Written-by: Prafulla Wadaskar -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, -# MA 02110-1301 USA -# -# Refer docs/README.kwimage for more details about how-to configure -# and create kirkwood boot image -# - -# Boot Media configurations -BOOT_FROM nand -NAND_ECC_MODE default -NAND_PAGE_SIZE 0x0800 - -# SOC registers configuration using bootrom header extension -# Maximum KWBIMAGE_MAX_CONFIG configurations allowed - -# Configure RGMII-0 interface pad voltage to 1.8V -DATA 0xFFD100e0 0x1b1b1b9b - -#Dram initalization for SINGLE x16 CL=5 @ 400MHz -DATA 0xFFD01400 0x43000c30 # DDR Configuration register -# bit13-0: 0xc30 (3120 DDR2 clks refresh rate) -# bit23-14: zero -# bit24: 1= enable exit self refresh mode on DDR access -# bit25: 1 required -# bit29-26: zero -# bit31-30: 01 - -DATA 0xFFD01404 0x37543000 # DDR Controller Control Low -# bit 4: 0=addr/cmd in smame cycle -# bit 5: 0=clk is driven during self refresh, we don't care for APX -# bit 6: 0=use recommended falling edge of clk for addr/cmd -# bit14: 0=input buffer always powered up -# bit18: 1=cpu lock transaction enabled -# bit23-20: 5=recommended value for CL=5 and STARTBURST_DEL disabled bit31=0 -# bit27-24: 7= CL+2, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM -# bit30-28: 3 required -# bit31: 0=no additional STARTBURST delay - -DATA 0xFFD01408 0x22125451 # DDR Timing (Low) (active cycles value +1) -# bit3-0: TRAS lsbs -# bit7-4: TRCD -# bit11- 8: TRP -# bit15-12: TWR -# bit19-16: TWTR -# bit20: TRAS msb -# bit23-21: 0x0 -# bit27-24: TRRD -# bit31-28: TRTP - -DATA 0xFFD0140C 0x00000a33 # DDR Timing (High) -# bit6-0: TRFC -# bit8-7: TR2R -# bit10-9: TR2W -# bit12-11: TW2W -# bit31-13: zero required - -DATA 0xFFD01410 0x000000cc # DDR Address Control -# bit1-0: 00, Cs0width=x8 -# bit3-2: 11, Cs0size=1Gb -# bit5-4: 00, Cs1width=x8 -# bit7-6: 11, Cs1size=1Gb -# bit9-8: 00, Cs2width=nonexistent -# bit11-10: 00, Cs2size =nonexistent -# bit13-12: 00, Cs3width=nonexistent -# bit15-14: 00, Cs3size =nonexistent -# bit16: 0, Cs0AddrSel -# bit17: 0, Cs1AddrSel -# bit18: 0, Cs2AddrSel -# bit19: 0, Cs3AddrSel -# bit31-20: 0 required - -DATA 0xFFD01414 0x00000000 # DDR Open Pages Control -# bit0: 0, OpenPage enabled -# bit31-1: 0 required - -DATA 0xFFD01418 0x00000000 # DDR Operation -# bit3-0: 0x0, DDR cmd -# bit31-4: 0 required - -DATA 0xFFD0141C 0x00000C52 # DDR Mode -# bit2-0: 2, BurstLen=2 required -# bit3: 0, BurstType=0 required -# bit6-4: 4, CL=5 -# bit7: 0, TestMode=0 normal -# bit8: 0, DLL reset=0 normal -# bit11-9: 6, auto-precharge write recovery ???????????? -# bit12: 0, PD must be zero -# bit31-13: 0 required - -DATA 0xFFD01420 0x00000040 # DDR Extended Mode -# bit0: 0, DDR DLL enabled -# bit1: 0, DDR drive strenght normal -# bit2: 0, DDR ODT control lsd (disabled) -# bit5-3: 000, required -# bit6: 1, DDR ODT control msb, (disabled) -# bit9-7: 000, required -# bit10: 0, differential DQS enabled -# bit11: 0, required -# bit12: 0, DDR output buffer enabled -# bit31-13: 0 required - -DATA 0xFFD01424 0x0000F17F # DDR Controller Control High -# bit2-0: 111, required -# bit3 : 1 , MBUS Burst Chop disabled -# bit6-4: 111, required -# bit7 : 0 -# bit8 : 1 , add writepath sample stage, must be 1 for DDR freq >= 300MHz -# bit9 : 0 , no half clock cycle addition to dataout -# bit10 : 0 , 1/4 clock cycle skew enabled for addr/ctl signals -# bit11 : 0 , 1/4 clock cycle skew disabled for write mesh -# bit15-12: 1111 required -# bit31-16: 0 required - -DATA 0xFFD01428 0x00085520 # DDR2 ODT Read Timing (default values) -DATA 0xFFD0147C 0x00008552 # DDR2 ODT Write Timing (default values) - -DATA 0xFFD01500 0x00000000 # CS[0]n Base address to 0x0 -DATA 0xFFD01504 0x0FFFFFF1 # CS[0]n Size -# bit0: 1, Window enabled -# bit1: 0, Write Protect disabled -# bit3-2: 00, CS0 hit selected -# bit23-4: ones, required -# bit31-24: 0x0F, Size (i.e. 256MB) - -DATA 0xFFD01508 0x10000000 # CS[1]n Base address to 256Mb -DATA 0xFFD0150C 0x0FFFFFF5 # CS[1]n Size 256Mb Window enabled for CS1 - -DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled -DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled - -DATA 0xFFD01494 0x00030000 # DDR ODT Control (Low) -DATA 0xFFD01498 0x00000000 # DDR ODT Control (High) -# bit1-0: 00, ODT0 controlled by ODT Control (low) register above -# bit3-2: 01, ODT1 active NEVER! -# bit31-4: zero, required - -DATA 0xFFD0149C 0x0000E803 # CPU ODT Control -DATA 0xFFD01480 0x00000001 # DDR Initialization Control -#bit0=1, enable DDR init upon this register write - -# End of Header extension -DATA 0x0 0x0 diff --git a/package/uboot-kirkwood/files/board/Marvell/iconnect/config.mk b/package/uboot-kirkwood/files/board/Marvell/iconnect/config.mk deleted file mode 100644 index 2bd9f79fcf..0000000000 --- a/package/uboot-kirkwood/files/board/Marvell/iconnect/config.mk +++ /dev/null @@ -1,28 +0,0 @@ -# -# (C) Copyright 2009 -# Marvell Semiconductor -# Written-by: Prafulla Wadaskar -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, -# MA 02110-1301 USA -# - -TEXT_BASE = 0x00600000 - -# Kirkwood Boot Image configuration file -KWD_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/kwbimage.cfg diff --git a/package/uboot-kirkwood/files/board/Marvell/iconnect/kwbimage.cfg b/package/uboot-kirkwood/files/board/Marvell/iconnect/kwbimage.cfg deleted file mode 100644 index 37042f5a41..0000000000 --- a/package/uboot-kirkwood/files/board/Marvell/iconnect/kwbimage.cfg +++ /dev/null @@ -1,162 +0,0 @@ -# -# (C) Copyright 2009 -# Marvell Semiconductor -# Written-by: Prafulla Wadaskar -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, -# MA 02110-1301 USA -# -# Refer docs/README.kwimage for more details about how-to configure -# and create kirkwood boot image -# - -# Boot Media configurations -BOOT_FROM nand -NAND_ECC_MODE default -NAND_PAGE_SIZE 0x0800 - -# SOC registers configuration using bootrom header extension -# Maximum KWBIMAGE_MAX_CONFIG configurations allowed - -# Configure RGMII-0 interface pad voltage to 1.8V -DATA 0xFFD100e0 0x1b1b1b9b - -#Dram initalization for SINGLE x16 CL=5 @ 400MHz -DATA 0xFFD01400 0x43000c30 # DDR Configuration register -# bit13-0: 0xc30 (3120 DDR2 clks refresh rate) -# bit23-14: zero -# bit24: 1= enable exit self refresh mode on DDR access -# bit25: 1 required -# bit29-26: zero -# bit31-30: 01 - -DATA 0xFFD01404 0x37543000 # DDR Controller Control Low -# bit 4: 0=addr/cmd in smame cycle -# bit 5: 0=clk is driven during self refresh, we don't care for APX -# bit 6: 0=use recommended falling edge of clk for addr/cmd -# bit14: 0=input buffer always powered up -# bit18: 1=cpu lock transaction enabled -# bit23-20: 5=recommended value for CL=5 and STARTBURST_DEL disabled bit31=0 -# bit27-24: 7= CL+2, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM -# bit30-28: 3 required -# bit31: 0=no additional STARTBURST delay - -DATA 0xFFD01408 0x22125451 # DDR Timing (Low) (active cycles value +1) -# bit3-0: TRAS lsbs -# bit7-4: TRCD -# bit11- 8: TRP -# bit15-12: TWR -# bit19-16: TWTR -# bit20: TRAS msb -# bit23-21: 0x0 -# bit27-24: TRRD -# bit31-28: TRTP - -DATA 0xFFD0140C 0x00000a33 # DDR Timing (High) -# bit6-0: TRFC -# bit8-7: TR2R -# bit10-9: TR2W -# bit12-11: TW2W -# bit31-13: zero required - -DATA 0xFFD01410 0x000000cc # DDR Address Control -# bit1-0: 00, Cs0width=x8 -# bit3-2: 11, Cs0size=1Gb -# bit5-4: 00, Cs1width=x8 -# bit7-6: 11, Cs1size=1Gb -# bit9-8: 00, Cs2width=nonexistent -# bit11-10: 00, Cs2size =nonexistent -# bit13-12: 00, Cs3width=nonexistent -# bit15-14: 00, Cs3size =nonexistent -# bit16: 0, Cs0AddrSel -# bit17: 0, Cs1AddrSel -# bit18: 0, Cs2AddrSel -# bit19: 0, Cs3AddrSel -# bit31-20: 0 required - -DATA 0xFFD01414 0x00000000 # DDR Open Pages Control -# bit0: 0, OpenPage enabled -# bit31-1: 0 required - -DATA 0xFFD01418 0x00000000 # DDR Operation -# bit3-0: 0x0, DDR cmd -# bit31-4: 0 required - -DATA 0xFFD0141C 0x00000C52 # DDR Mode -# bit2-0: 2, BurstLen=2 required -# bit3: 0, BurstType=0 required -# bit6-4: 4, CL=5 -# bit7: 0, TestMode=0 normal -# bit8: 0, DLL reset=0 normal -# bit11-9: 6, auto-precharge write recovery ???????????? -# bit12: 0, PD must be zero -# bit31-13: 0 required - -DATA 0xFFD01420 0x00000040 # DDR Extended Mode -# bit0: 0, DDR DLL enabled -# bit1: 0, DDR drive strenght normal -# bit2: 0, DDR ODT control lsd (disabled) -# bit5-3: 000, required -# bit6: 1, DDR ODT control msb, (disabled) -# bit9-7: 000, required -# bit10: 0, differential DQS enabled -# bit11: 0, required -# bit12: 0, DDR output buffer enabled -# bit31-13: 0 required - -DATA 0xFFD01424 0x0000F17F # DDR Controller Control High -# bit2-0: 111, required -# bit3 : 1 , MBUS Burst Chop disabled -# bit6-4: 111, required -# bit7 : 0 -# bit8 : 1 , add writepath sample stage, must be 1 for DDR freq >= 300MHz -# bit9 : 0 , no half clock cycle addition to dataout -# bit10 : 0 , 1/4 clock cycle skew enabled for addr/ctl signals -# bit11 : 0 , 1/4 clock cycle skew disabled for write mesh -# bit15-12: 1111 required -# bit31-16: 0 required - -DATA 0xFFD01428 0x00085520 # DDR2 ODT Read Timing (default values) -DATA 0xFFD0147C 0x00008552 # DDR2 ODT Write Timing (default values) - -DATA 0xFFD01500 0x00000000 # CS[0]n Base address to 0x0 -DATA 0xFFD01504 0x0FFFFFF1 # CS[0]n Size -# bit0: 1, Window enabled -# bit1: 0, Write Protect disabled -# bit3-2: 00, CS0 hit selected -# bit23-4: ones, required -# bit31-24: 0x0F, Size (i.e. 256MB) - -DATA 0xFFD01508 0x00000000 # CS[1]n Base address to 256Mb -DATA 0xFFD0150C 0x00000000 # CS[1]n Size 256Mb Window enabled for CS1 - -DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled -DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled - -DATA 0xFFD01494 0x00030000 # DDR ODT Control (Low) -DATA 0xFFD01498 0x00000000 # DDR ODT Control (High) -# bit1-0: 00, ODT0 controlled by ODT Control (low) register above -# bit3-2: 01, ODT1 active NEVER! -# bit31-4: zero, required - -DATA 0xFFD0149C 0x0000E803 # CPU ODT Control -DATA 0xFFD01480 0x00000001 # DDR Initialization Control -#bit0=1, enable DDR init upon this register write - -# End of Header extension -DATA 0x0 0x0 diff --git a/package/uboot-kirkwood/files/board/Marvell/iconnect/Makefile b/package/uboot-kirkwood/files/board/iomega/iconnect/Makefile similarity index 76% rename from package/uboot-kirkwood/files/board/Marvell/iconnect/Makefile rename to package/uboot-kirkwood/files/board/iomega/iconnect/Makefile index 0301f987c0..f77fcfb990 100644 --- a/package/uboot-kirkwood/files/board/Marvell/iconnect/Makefile +++ b/package/uboot-kirkwood/files/board/iomega/iconnect/Makefile @@ -13,18 +13,16 @@ # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, -# MA 02110-1301 USA +# along with this program. If not, see . # include $(TOPDIR)/config.mk -LIB = $(obj)lib$(BOARD).a +LIB = $(obj)lib$(BOARD).o COBJS := iconnect.o @@ -33,13 +31,7 @@ OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend + $(call cmd_link_o_target, $(OBJS) $(SOBJS)) ######################################################################### diff --git a/package/uboot-kirkwood/files/board/Marvell/iconnect/iconnect.c b/package/uboot-kirkwood/files/board/iomega/iconnect/iconnect.c similarity index 77% rename from package/uboot-kirkwood/files/board/Marvell/iconnect/iconnect.c rename to package/uboot-kirkwood/files/board/iomega/iconnect/iconnect.c index ee5d5875ee..34ddadf8a7 100644 --- a/package/uboot-kirkwood/files/board/Marvell/iconnect/iconnect.c +++ b/package/uboot-kirkwood/files/board/iomega/iconnect/iconnect.c @@ -1,7 +1,7 @@ /* - * (C) Copyright 2009 - * Marvell Semiconductor - * Written-by: Prafulla Wadaskar + * Copyright (C) 2009-2012 + * Wojciech Dubowik + * Luka Perkov * * See file CREDITS for list of people who contributed to this * project. @@ -17,25 +17,24 @@ * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301 USA + * along with this program. If not, see . */ #include #include +#include #include #include #include "iconnect.h" DECLARE_GLOBAL_DATA_PTR; -int board_init(void) +int board_early_init_f(void) { /* * default gpio configuration * There are maximum 64 gpios controlled through 2 sets of registers - * the below configuration configures mainly initial LED status + * the below configuration configures mainly initial LED status */ kw_config_gpio(ICONNECT_OE_VAL_LOW, ICONNECT_OE_VAL_HIGH, @@ -94,33 +93,21 @@ int board_init(void) MPP48_GPIO, MPP49_GPIO, 0 -}; + }; kirkwood_mpp_conf(kwmpp_config); + return 0; +} - /* - * arch number of board - */ - gd->bd->bi_arch_number = MACH_TYPE_ICONNECT; - - /* adress of boot parameters */ +int board_init(void) +{ + /* Boot parameters address */ gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100; return 0; } -int dram_init(void) -{ - int i; - - for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { - gd->bd->bi_dram[i].start = kw_sdram_bar(i); - gd->bd->bi_dram[i].size = kw_sdram_bs(i); - } - return 0; -} - #ifdef CONFIG_RESET_PHY_R -/* Configure and enable MV88E1116 PHY */ +/* Configure and initialize PHY */ void reset_phy(void) { u16 reg; @@ -132,8 +119,7 @@ void reset_phy(void) /* command to read PHY dev address */ if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) { - printf("Err..%s could not read PHY dev address\n", - __FUNCTION__); + printf("Err..(%s) could not read PHY dev address\n", __func__); return; } @@ -150,6 +136,6 @@ void reset_phy(void) /* reset the phy */ miiphy_reset(name, devadr); - printf("88E1116 Initialized on %s\n", name); + debug("88E1116 Initialized on %s\n", name); } #endif /* CONFIG_RESET_PHY_R */ diff --git a/package/uboot-kirkwood/files/board/Marvell/iconnect/iconnect.h b/package/uboot-kirkwood/files/board/iomega/iconnect/iconnect.h similarity index 77% rename from package/uboot-kirkwood/files/board/Marvell/iconnect/iconnect.h rename to package/uboot-kirkwood/files/board/iomega/iconnect/iconnect.h index 4774c0757a..2fb3e5ed8f 100644 --- a/package/uboot-kirkwood/files/board/Marvell/iconnect/iconnect.h +++ b/package/uboot-kirkwood/files/board/iomega/iconnect/iconnect.h @@ -1,7 +1,7 @@ /* - * (C) Copyright 2009 - * Marvell Semiconductor - * Written-by: Prafulla Wadaskar + * Copyright (C) 2009-2012 + * Wojciech Dubowik + * Luka Perkov * * See file CREDITS for list of people who contributed to this * project. @@ -17,16 +17,14 @@ * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301 USA + * along with this program. If not, see . */ #ifndef __ICONNECT_H #define __ICONNECT_H #define ICONNECT_OE_LOW (~(1 << 7)) -#define ICONNECT_OE_HIGH (~(1 << 10)) +#define ICONNECT_OE_HIGH (~(1 << 10)) #define ICONNECT_OE_VAL_LOW (0) #define ICONNECT_OE_VAL_HIGH (1 << 10) diff --git a/package/uboot-kirkwood/files/board/iomega/iconnect/kwbimage.cfg b/package/uboot-kirkwood/files/board/iomega/iconnect/kwbimage.cfg new file mode 100644 index 0000000000..dee546a524 --- /dev/null +++ b/package/uboot-kirkwood/files/board/iomega/iconnect/kwbimage.cfg @@ -0,0 +1,165 @@ +# +# (C) Copyright 2009-2012 +# Wojciech Dubowik +# Luka Perkov +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . +# +# Refer docs/README.kwimage for more details about how-to configure +# and create kirkwood boot image +# + +# Boot Media configurations +BOOT_FROM nand +NAND_ECC_MODE default +NAND_PAGE_SIZE 0x0800 + +# SOC registers configuration using bootrom header extension +# Maximum KWBIMAGE_MAX_CONFIG configurations allowed + +# Configure RGMII-0 interface pad voltage to 1.8V +DATA 0xffd100e0 0x1b1b1b9b + +#Dram initalization for SINGLE x16 CL=5 @ 400MHz +DATA 0xffd01400 0x43000c30 # DDR Configuration register +# bit13-0: 0xc30, (3120 DDR2 clks refresh rate) +# bit23-14: 0x0, +# bit24: 0x1, enable exit self refresh mode on DDR access +# bit25: 0x1, required +# bit29-26: 0x0, +# bit31-30: 0x1, + +DATA 0xffd01404 0x37543000 # DDR Controller Control Low +# bit4: 0x0, addr/cmd in smame cycle +# bit5: 0x0, clk is driven during self refresh, we don't care for APX +# bit6: 0x0, use recommended falling edge of clk for addr/cmd +# bit14: 0x0, input buffer always powered up +# bit18: 0x1, cpu lock transaction enabled +# bit23-20: 0x5, recommended value for CL=5 and STARTBURST_DEL disabled bit31=0 +# bit27-24: 0x7, CL+2, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM +# bit30-28: 0x3, required +# bit31: 0x0, no additional STARTBURST delay + +DATA 0xffd01408 0x22125451 # DDR Timing (Low) (active cycles value +1) +# bit3-0: TRAS lsbs +# bit7-4: TRCD +# bit11-8: TRP +# bit15-12: TWR +# bit19-16: TWTR +# bit20: TRAS msb +# bit23-21: 0x0 +# bit27-24: TRRD +# bit31-28: TRTP + +DATA 0xffd0140c 0x00000a33 # DDR Timing (High) +# bit6-0: TRFC +# bit8-7: TR2R +# bit10-9: TR2W +# bit12-11: TW2W +# bit31-13: 0x0, required + +DATA 0xffd01410 0x000000cc # DDR Address Control +# bit1-0: 00, Cs0width (x8) +# bit3-2: 11, Cs0size (1Gb) +# bit5-4: 00, Cs1width (x8) +# bit7-6: 11, Cs1size (1Gb) +# bit9-8: 00, Cs2width (nonexistent) +# bit11-10: 00, Cs2size (nonexistent) +# bit13-12: 00, Cs3width (nonexistent) +# bit15-14: 00, Cs3size (nonexistent) +# bit16: 0, Cs0AddrSel +# bit17: 0, Cs1AddrSel +# bit18: 0, Cs2AddrSel +# bit19: 0, Cs3AddrSel +# bit31-20: 0x0, required + +DATA 0xffd01414 0x00000000 # DDR Open Pages Control +# bit0: 0, OpenPage enabled +# bit31-1: 0x0, required + +DATA 0xffd01418 0x00000000 # DDR Operation +# bit3-0: 0x0, DDR cmd +# bit31-4: 0x0, required + +DATA 0xffd0141c 0x00000c52 # DDR Mode +# bit2-0: 0x2, BurstLen=2 required +# bit3: 0x0, BurstType=0 required +# bit6-4: 0x4, CL=5 +# bit7: 0x0, TestMode=0 normal +# bit8: 0x0, DLL reset=0 normal +# bit11-9: 0x6, auto-precharge write recovery ???????????? +# bit12: 0x0, PD must be zero +# bit31-13: 0x0, required + +DATA 0xffd01420 0x00000040 # DDR Extended Mode +# bit0: 0, DDR DLL enabled +# bit1: 0, DDR drive strenght normal +# bit2: 0, DDR ODT control lsd (disabled) +# bit5-3: 0x0, required +# bit6: 1, DDR ODT control msb, (disabled) +# bit9-7: 0x0, required +# bit10: 0, differential DQS enabled +# bit11: 0, required +# bit12: 0, DDR output buffer enabled +# bit31-13: 0x0, required + +DATA 0xffd01424 0x0000f17f # DDR Controller Control High +# bit2-0: 0x7, required +# bit3: 0x1, MBUS Burst Chop disabled +# bit6-4: 0x7, required +# bit7: 0x0, +# bit8: 0x1, add writepath sample stage, must be 1 for DDR freq >= 300MHz +# bit9: 0x0, no half clock cycle addition to dataout +# bit10: 0x0, 1/4 clock cycle skew enabled for addr/ctl signals +# bit11: 0x0, 1/4 clock cycle skew disabled for write mesh +# bit15-12: 0xf, required +# bit31-16: 0x0, required + +DATA 0xffd01428 0x00085520 # DDR2 ODT Read Timing (default values) +DATA 0xffd0147c 0x00008552 # DDR2 ODT Write Timing (default values) + +DATA 0xffd01500 0x00000000 # CS[0]n Base address to 0x0 +DATA 0xffd01504 0x0ffffff1 # CS[0]n Size +# bit0: 0x1, Window enabled +# bit1: 0x0, Write Protect disabled +# bit3-2: 0x0, CS0 hit selected +# bit23-4: 0xfffff, required +# bit31-24: 0x0f, Size (i.e. 256MB) + +DATA 0xffd01508 0x00000000 # CS[1]n Base address to 256Mb +DATA 0xffd0150c 0x00000000 # CS[1]n Size 256Mb Window enabled for CS1 + +DATA 0xffd01514 0x00000000 # CS[2]n Size, window disabled +DATA 0xffd0151c 0x00000000 # CS[3]n Size, window disabled + +DATA 0xffd01494 0x00030000 # DDR ODT Control (Low) +# bit3-0: ODT0Rd, MODT[0] asserted during read from DRAM CS1 +# bit7-4: ODT0Rd, MODT[0] asserted during read from DRAM CS0 +# bit19-16:2, ODT0Wr, MODT[0] asserted during write to DRAM CS1 +# bit23-20:1, ODT0Wr, MODT[0] asserted during write to DRAM CS0 + +DATA 0xffd01498 0x00000000 # DDR ODT Control (High) +# bit1-0: 0x0, ODT0 controlled by ODT Control (low) register above +# bit3-2: 0x1, ODT1 active NEVER! +# bit31-4: 0x0, required + +DATA 0xffd0149c 0x0000e803 # CPU ODT Control +DATA 0xffd01480 0x00000001 # DDR Initialization Control +# bit0: 0x1, enable DDR init upon this register write + +# End of Header extension +DATA 0x0 0x0 diff --git a/package/uboot-kirkwood/files/include/configs/dockstar.h b/package/uboot-kirkwood/files/include/configs/dockstar.h deleted file mode 100644 index e19552c69c..0000000000 --- a/package/uboot-kirkwood/files/include/configs/dockstar.h +++ /dev/null @@ -1,198 +0,0 @@ -/* - * (C) Copyright 2009 - * Marvell Semiconductor - * Written-by: Prafulla Wadaskar - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#ifndef _CONFIG_SHEEVAPLUG_H -#define _CONFIG_SHEEVAPLUG_H - -/* - * Version number information - */ -#define CONFIG_IDENT_STRING "\nMarvell-Sheevaplug" - -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_MARVELL 1 -#define CONFIG_ARM926EJS 1 /* Basic Architecture */ -#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ -#define CONFIG_KIRKWOOD 1 /* SOC Family Name */ -#define CONFIG_KW88F6281 1 /* SOC Name */ -#define CONFIG_MACH_SHEEVAPLUG /* Machine type */ - -#define CONFIG_MD5 /* get_random_hex on krikwood needs MD5 support */ -#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ -#define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */ -#define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */ - -/* - * CLKs configurations - */ -#define CONFIG_SYS_HZ 1000 - -/* - * NS16550 Configuration - */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK -#define CONFIG_SYS_NS16550_COM1 KW_UART0_BASE - -/* - * Serial Port configuration - * The following definitions let you select what serial you want to use - * for your console driver. - */ - -#define CONFIG_CONS_INDEX 1 /*Console on UART0 */ -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \ - 115200,230400, 460800, 921600 } -/* auto boot */ -#define CONFIG_BOOTDELAY 3 /* default enable autoboot */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_INITRD_TAG 1 /* enable INITRD tag */ -#define CONFIG_SETUP_MEMORY_TAGS 1 /* enable memory tag */ - -#define CONFIG_SYS_PROMPT "Marvell>> " /* Command Prompt */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ - +sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buff */ -/* - * Commands configuration - */ -#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ -#include -#define CONFIG_CMD_AUTOSCRIPT -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_ENV -#define CONFIG_CMD_FAT -#define CONFIG_CMD_NAND -#define CONFIG_CMD_PING -#define CONFIG_CMD_USB - -/* - * NAND configuration - */ -#ifdef CONFIG_CMD_NAND -#define CONFIG_NAND_KIRKWOOD -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define NAND_MAX_CHIPS 1 -#define CONFIG_SYS_NAND_BASE 0xD8000000 /* KW_DEFADR_NANDF */ -#define NAND_ALLOW_ERASE_ALL 1 -#endif - -/* - * Environment variables configurations - */ -#ifdef CONFIG_CMD_NAND -#define CONFIG_ENV_IS_IN_NAND 1 -#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ -#else -#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ -#endif -/* - * max 4k env size is enough, but in case of nand - * it has to be rounded to sector size - */ -#define CONFIG_ENV_SIZE 0x20000 /* 128k */ -#define CONFIG_ENV_ADDR 0x140000 -#define CONFIG_ENV_OFFSET 0x140000 /* env starts here */ - -/* - * Default environment variables - */ -#define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \ - "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ - "${x_bootcmd_usb}; bootm 0x6400000;" - -#define CONFIG_MTDPARTS "orion_nand:1M(u-boot)," \ - "1M@1M(second_stage_u-boot)," \ - "3M@2M(kernel),32M@5M(rootfs),219M@37M(data) rw\0" - -#define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \ - "=ttyS0,115200 mtdparts="CONFIG_MTDPARTS \ - "x_bootcmd_kernel=nand read 0x6400000 0x200000 0x300000\0" \ - "x_bootcmd_usb=usb start\0" \ - "x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0" - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (1024 * 128) /* 128kB for malloc() */ -/* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 - -/* - * Other required minimal configurations - */ -#define CONFIG_CONSOLE_INFO_QUIET /* some code reduction */ -#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ -#define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */ -#define CONFIG_DISPLAY_CPUINFO /* Display cpu info */ -#define CONFIG_NR_DRAM_BANKS 4 -#define CONFIG_STACKSIZE 0x00100000 /* regular stack- 1M */ -#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */ -#define CONFIG_SYS_MEMTEST_START 0x00400000 /* 4M */ -#define CONFIG_SYS_MEMTEST_END 0x007fffff /*(_8M -1) */ -#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ - -/* - * Ethernet Driver configuration - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_NETCONSOLE /* include NetConsole support */ -#define CONFIG_NET_MULTI /* specify more that one ports available */ -#define CONFIG_MII /* expose smi ove miiphy interface */ -#define CONFIG_MVGBE /* Enable kirkwood Gbe Controller Driver */ -#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */ -#define CONFIG_MVGBE_PORTS {1,0} /* enable port 0 only */ -#define CONFIG_PHY_BASE_ADR 0 -#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ -#define CONFIG_RESET_PHY_R /* use reset_phy() to init mv8831116 PHY */ -#endif /* CONFIG_CMD_NET */ - -/* - * USB/EHCI - */ -#ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI /* Enable EHCI USB support */ -#define CONFIG_USB_EHCI_KIRKWOOD /* on Kirkwood platform */ -#define CONFIG_EHCI_IS_TDI -#define CONFIG_USB_STORAGE -#define CONFIG_DOS_PARTITION -#define CONFIG_ISO_PARTITION -#define CONFIG_SUPPORT_VFAT -#endif /* CONFIG_CMD_USB */ - -#define CONFIG_SERVERIP 169.254.254.254 -#define CONFIG_IPADDR 169.254.254.243 -#endif /* _CONFIG_SHEEVAPLUG_H */ diff --git a/package/uboot-kirkwood/files/include/configs/iconnect.h b/package/uboot-kirkwood/files/include/configs/iconnect.h index 434397af30..59432f14dd 100644 --- a/package/uboot-kirkwood/files/include/configs/iconnect.h +++ b/package/uboot-kirkwood/files/include/configs/iconnect.h @@ -1,7 +1,7 @@ /* - * (C) Copyright 2009 - * Marvell Semiconductor - * Written-by: Prafulla Wadaskar + * (C) Copyright 2009-2012 + * Wojciech Dubowik + * Luka Perkov * * See file CREDITS for list of people who contributed to this * project. @@ -17,9 +17,7 @@ * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301 USA + * along with this program. If not, see . */ #ifndef _CONFIG_ICONNECT_H @@ -28,76 +26,29 @@ /* * Version number information */ -#define CONFIG_IDENT_STRING "\nIomega iConnect Wireless" - - -//#define DEBUG - +#define CONFIG_IDENT_STRING " Iomega iConnect Wireless" /* - * High Level Configuration Options (easy to change) + * High level configuration options */ -#define CONFIG_MARVELL 1 -#define CONFIG_ARM926EJS 1 /* Basic Architecture */ -#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ -#define CONFIG_KIRKWOOD 1 /* SOC Family Name */ -#define CONFIG_KW88F6281 1 /* SOC Name */ -#define CONFIG_MACH_ICONNECT /* Machine type */ - -#define CONFIG_MD5 /* get_random_hex on krikwood needs MD5 support */ +#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ +#define CONFIG_KIRKWOOD /* SOC Family Name */ +#define CONFIG_KW88F6281 /* SOC Name */ #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ #define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */ -#define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */ -#define CONFIG_KIRKWOOD_PCIE_INIT /*enable pci express on iconnect board*/ /* - * CLKs configurations + * Machine type */ -#define CONFIG_SYS_HZ 1000 +#define CONFIG_MACH_TYPE MACH_TYPE_ICONNECT -/* - * NS16550 Configuration - */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK -#define CONFIG_SYS_NS16550_COM1 KW_UART0_BASE - -/* - * Serial Port configuration - * The following definitions let you select what serial you want to use - * for your console driver. - */ - -#define CONFIG_CONS_INDEX 1 /*Console on UART0 */ -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \ - 115200,230400, 460800, 921600 } -/* auto boot */ -#define CONFIG_BOOTDELAY 3 /* default enable autoboot */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_INITRD_TAG 1 /* enable INITRD tag */ -#define CONFIG_SETUP_MEMORY_TAGS 1 /* enable memory tag */ - -#define CONFIG_SYS_PROMPT "Marvell>> " /* Command Prompt */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ - +sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buff */ /* * Commands configuration */ -#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ +#define CONFIG_SYS_NO_FLASH /* declare no flash (NOR/SPI) */ +#define CONFIG_SYS_MVFS #include -#define CONFIG_CMD_AUTOSCRIPT -#define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV #define CONFIG_CMD_MII #define CONFIG_CMD_NAND @@ -105,37 +56,30 @@ #define CONFIG_CMD_USB /* - * NAND configuration + * mv-common.h should be defined after CMD configs since it used them + * to enable certain macros */ -#ifdef CONFIG_CMD_NAND -#define CONFIG_NAND_KIRKWOOD -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define NAND_MAX_CHIPS 1 -#define CONFIG_SYS_NAND_BASE 0xD8000000 /* KW_DEFADR_NANDF */ -#define NAND_ALLOW_ERASE_ALL 1 -#endif +#include "mv-common.h" + +#undef CONFIG_SYS_PROMPT +#define CONFIG_SYS_PROMPT "iconnect => " /* - * Environment variables configurations + * Environment variables configuration */ #ifdef CONFIG_CMD_NAND -#define CONFIG_ENV_IS_IN_NAND 1 -#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_SECT_SIZE 0x20000 #else -#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ +#define CONFIG_ENV_IS_NOWHERE #endif -/* - * max 4k env size is enough, but in case of nand - * it has to be rounded to sector size - */ -#define CONFIG_ENV_SIZE 0x20000 /* 128k */ -#define CONFIG_ENV_ADDR 0xc0000 /*it's above original iConnect u-boot envirinment 0xa0000 */ -#define CONFIG_ENV_OFFSET 0xc0000 /* env starts here */ +#define CONFIG_ENV_SIZE 0x20000 +#define CONFIG_ENV_OFFSET 0xc0000 /* * Default environment variables */ -#define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \ +#define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \ "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ "${x_bootcmd_usb}; bootm 0x6400000;" @@ -143,62 +87,26 @@ "3M@1M(kernel),32M@4M(rootfs),475M@36M(data)\0" #define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \ - "=ttyS0,115200 mtdparts="CONFIG_MTDPARTS \ + "=ttyS0,115200 mtdparts="CONFIG_MTDPARTS \ "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \ "x_bootcmd_usb=usb start\0" \ "x_bootargs_root=root=/dev/mtdblock2 rw rootfstype=jffs2\0" /* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* 1 MiB for malloc() */ -/* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 - -/* - * Other required minimal configurations - */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING -#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ -#define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */ -#define CONFIG_DISPLAY_CPUINFO /* Display cpu info */ -#define CONFIG_NR_DRAM_BANKS 4 -#define CONFIG_STACKSIZE 0x00100000 /* regular stack- 1M */ -#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */ -#define CONFIG_SYS_MEMTEST_START 0x00400000 /* 4M */ -#define CONFIG_SYS_MEMTEST_END 0x007fffff /*(_8M -1) */ -#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ - -/* - * Ethernet Driver configuration + * Ethernet driver configuration */ #ifdef CONFIG_CMD_NET -#define CONFIG_NETCONSOLE /* include NetConsole support */ -#define CONFIG_NET_MULTI /* specify more that one ports available */ -#define CONFIG_MII /* expose smi ove miiphy interface */ -#define CONFIG_MVGBE /* Enable kirkwood Gbe Controller Driver */ -#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */ -#define CONFIG_MVGBE_PORTS {1,0} /* enable port 0 only */ +#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ #define CONFIG_PHY_BASE_ADR 11 -#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ -#define CONFIG_RESET_PHY_R /* use reset_phy() to init mv8831116 PHY */ #endif /* CONFIG_CMD_NET */ /* - * USB/EHCI + * SATA driver configuration */ -#ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI /* Enable EHCI USB support */ -#define CONFIG_USB_EHCI_KIRKWOOD /* on Kirkwood platform */ -#define CONFIG_EHCI_IS_TDI -#define CONFIG_USB_STORAGE -#define CONFIG_DOS_PARTITION -#define CONFIG_ISO_PARTITION -#define CONFIG_SUPPORT_VFAT -#endif /* CONFIG_CMD_USB */ +#ifdef CONFIG_CMD_IDE +#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET +#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET +#endif /* CONFIG_CMD_IDE */ /* * File system @@ -209,225 +117,8 @@ #define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS #define CONFIG_RBTREE -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ +#define CONFIG_MTD_DEVICE #define CONFIG_MTD_PARTITIONS #define CONFIG_CMD_MTDPARTS -#define CONFIG_LZO -#endif /* _CONFIG_SHEEVAPLUG_H */ -/* - * (C) Copyright 2009 - * Marvell Semiconductor - * Written-by: Prafulla Wadaskar - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#ifndef _CONFIG_ICONNECT_H -#define _CONFIG_ICONNECT_H - -/* - * Version number information - */ -#define CONFIG_IDENT_STRING "\nIomega iConnect Wireless" - - -//#define DEBUG - - -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_MARVELL 1 -#define CONFIG_ARM926EJS 1 /* Basic Architecture */ -#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ -#define CONFIG_KIRKWOOD 1 /* SOC Family Name */ -#define CONFIG_KW88F6281 1 /* SOC Name */ -#define CONFIG_MACH_ICONNECT /* Machine type */ - -#define CONFIG_MD5 /* get_random_hex on krikwood needs MD5 support */ -#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ -#define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */ -#define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */ - -/* - * CLKs configurations - */ -#define CONFIG_SYS_HZ 1000 - -/* - * NS16550 Configuration - */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK -#define CONFIG_SYS_NS16550_COM1 KW_UART0_BASE - -/* - * Serial Port configuration - * The following definitions let you select what serial you want to use - * for your console driver. - */ - -#define CONFIG_CONS_INDEX 1 /*Console on UART0 */ -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \ - 115200,230400, 460800, 921600 } -/* auto boot */ -#define CONFIG_BOOTDELAY 3 /* default enable autoboot */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_INITRD_TAG 1 /* enable INITRD tag */ -#define CONFIG_SETUP_MEMORY_TAGS 1 /* enable memory tag */ - -#define CONFIG_SYS_PROMPT "Marvell>> " /* Command Prompt */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ - +sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buff */ - -/* - * Commands configuration - */ -#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ -#include -#define CONFIG_CMD_AUTOSCRIPT -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_ENV -#define CONFIG_CMD_MII -#define CONFIG_CMD_NAND -#define CONFIG_CMD_PING -#define CONFIG_CMD_USB - -/* - * NAND configuration - */ -#ifdef CONFIG_CMD_NAND -#define CONFIG_NAND_KIRKWOOD -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define NAND_MAX_CHIPS 1 -#define CONFIG_SYS_NAND_BASE 0xD8000000 /* KW_DEFADR_NANDF */ -#define NAND_ALLOW_ERASE_ALL 1 -#endif - -/* - * Environment variables configurations - */ -#ifdef CONFIG_CMD_NAND -#define CONFIG_ENV_IS_IN_NAND 1 -#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ -#else -#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ -#endif -/* - * max 4k env size is enough, but in case of nand - * it has to be rounded to sector size - */ -#define CONFIG_ENV_SIZE 0x20000 /* 128k */ -#define CONFIG_ENV_ADDR 0xc0000 /*it's above original iConnect u-boot envirinment 0xa0000 */ -#define CONFIG_ENV_OFFSET 0xc0000 /* env starts here */ - -/* - * Default environment variables - */ -#define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \ - "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ - "${x_bootcmd_usb}; bootm 0x6400000;" - -#define CONFIG_MTDPARTS "orion_nand:1M(u-boot)," \ - "3M@1M(kernel),64M@4M(rootfs),443M@68M(data) rw\0" - -#define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \ - "=ttyS0,115200 mtdparts="CONFIG_MTDPARTS \ - "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \ - "x_bootcmd_usb=usb start\0" \ - "x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0" - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* 1 MiB for malloc() */ -/* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 - -/* - * Other required minimal configurations - */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING -#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ -#define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */ -#define CONFIG_DISPLAY_CPUINFO /* Display cpu info */ -#define CONFIG_NR_DRAM_BANKS 4 -#define CONFIG_STACKSIZE 0x00100000 /* regular stack- 1M */ -#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */ -#define CONFIG_SYS_MEMTEST_START 0x00400000 /* 4M */ -#define CONFIG_SYS_MEMTEST_END 0x007fffff /*(_8M -1) */ -#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ - -/* - * Ethernet Driver configuration - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_NETCONSOLE /* include NetConsole support */ -#define CONFIG_NET_MULTI /* specify more that one ports available */ -#define CONFIG_MII /* expose smi ove miiphy interface */ -#define CONFIG_MVGBE /* Enable kirkwood Gbe Controller Driver */ -#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */ -#define CONFIG_MVGBE_PORTS {1,0} /* enable port 0 only */ -#define CONFIG_PHY_BASE_ADR 11 -#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ -#define CONFIG_RESET_PHY_R /* use reset_phy() to init mv8831116 PHY */ -#endif /* CONFIG_CMD_NET */ - -/* - * USB/EHCI - */ -#ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI /* Enable EHCI USB support */ -#define CONFIG_USB_EHCI_KIRKWOOD /* on Kirkwood platform */ -#define CONFIG_EHCI_IS_TDI -#define CONFIG_USB_STORAGE -#define CONFIG_DOS_PARTITION -#define CONFIG_ISO_PARTITION -#define CONFIG_SUPPORT_VFAT -#endif /* CONFIG_CMD_USB */ - -/* - * File system - */ -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_UBI -#define CONFIG_CMD_UBIFS -#define CONFIG_RBTREE -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define CONFIG_MTD_PARTITIONS -#define CONFIG_CMD_MTDPARTS -#define CONFIG_LZO - -#endif /* _CONFIG_SHEEVAPLUG_H */ +#endif /* _CONFIG_ICONNECT_H */ diff --git a/package/uboot-kirkwood/patches/0001-ib62x0.patch b/package/uboot-kirkwood/patches/0001-ib62x0.patch new file mode 100644 index 0000000000..0a7dc47a59 --- /dev/null +++ b/package/uboot-kirkwood/patches/0001-ib62x0.patch @@ -0,0 +1,542 @@ +http://lists.denx.de/pipermail/u-boot/2012-April/122597.html +http://patchwork.ozlabs.org/patch/153293/ +--- + +diff --git a/MAINTAINERS b/MAINTAINERS +index 708ded7..9d2aba7 100644 +--- a/MAINTAINERS ++++ b/MAINTAINERS +@@ -777,6 +777,10 @@ Linus Walleij + integratorap various + integratorcp various + ++Luka Perkov ++ ++ ib62x0 ARM926EJS ++ + Dave Peverley + + omap730p2 ARM926EJS +diff --git a/board/raidsonic/ib62x0/Makefile b/board/raidsonic/ib62x0/Makefile +new file mode 100644 +index 0000000..d450f8d +--- /dev/null ++++ b/board/raidsonic/ib62x0/Makefile +@@ -0,0 +1,43 @@ ++# ++# (C) Copyright 2009 ++# Marvell Semiconductor ++# Written-by: Prafulla Wadaskar ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program. If not, see . ++# ++ ++include $(TOPDIR)/config.mk ++ ++LIB = $(obj)lib$(BOARD).o ++ ++COBJS := ib62x0.o ++ ++SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) ++OBJS := $(addprefix $(obj),$(COBJS)) ++SOBJS := $(addprefix $(obj),$(SOBJS)) ++ ++$(LIB): $(obj).depend $(OBJS) $(SOBJS) ++ $(call cmd_link_o_target, $(OBJS) $(SOBJS)) ++ ++######################################################################### ++ ++# defines $(obj).depend target ++include $(SRCTREE)/rules.mk ++ ++sinclude $(obj).depend ++ ++######################################################################### +diff --git a/board/raidsonic/ib62x0/ib62x0.c b/board/raidsonic/ib62x0/ib62x0.c +new file mode 100644 +index 0000000..65f2c2e +--- /dev/null ++++ b/board/raidsonic/ib62x0/ib62x0.c +@@ -0,0 +1,79 @@ ++/* ++ * Copyright (C) 2011-2012 ++ * Gerald Kerma ++ * Luka Perkov ++ * Simon Baatz ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program. If not, see . ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include "ib62x0.h" ++ ++DECLARE_GLOBAL_DATA_PTR; ++ ++int board_early_init_f(void) ++{ ++ /* ++ * default gpio configuration ++ * There are maximum 64 gpios controlled through 2 sets of registers ++ * the below configuration configures mainly initial LED status ++ */ ++ kw_config_gpio(IB62x0_OE_VAL_LOW, ++ IB62x0_OE_VAL_HIGH, ++ IB62x0_OE_LOW, IB62x0_OE_HIGH); ++ ++ /* Multi-Purpose Pins Functionality configuration */ ++ u32 kwmpp_config[] = { ++ MPP0_NF_IO2, ++ MPP1_NF_IO3, ++ MPP2_NF_IO4, ++ MPP3_NF_IO5, ++ MPP4_NF_IO6, ++ MPP5_NF_IO7, ++ MPP6_SYSRST_OUTn, ++ MPP8_TW_SDA, ++ MPP9_TW_SCK, ++ MPP10_UART0_TXD, ++ MPP11_UART0_RXD, ++ MPP18_NF_IO0, ++ MPP19_NF_IO1, ++ MPP20_SATA1_ACTn, ++ MPP21_SATA0_ACTn, ++ MPP22_GPIO, /* Power LED red */ ++ MPP24_GPIO, /* Power off device */ ++ MPP25_GPIO, /* Power LED green */ ++ MPP27_GPIO, /* USB transfer LED */ ++ MPP28_GPIO, /* Reset button */ ++ MPP29_GPIO, /* USB Copy button */ ++ 0 ++ }; ++ kirkwood_mpp_conf(kwmpp_config); ++ return 0; ++} ++ ++int board_init(void) ++{ ++ /* adress of boot parameters */ ++ gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100; ++ ++ return 0; ++} +diff --git a/board/raidsonic/ib62x0/ib62x0.h b/board/raidsonic/ib62x0/ib62x0.h +new file mode 100644 +index 0000000..0c30690 +--- /dev/null ++++ b/board/raidsonic/ib62x0/ib62x0.h +@@ -0,0 +1,40 @@ ++/* ++ * Copyright (C) 2011-2012 ++ * Gerald Kerma ++ * Simon Baatz ++ * Luka Perkov ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program. If not, see . ++ */ ++ ++#ifndef __IB62x0_H ++#define __IB62x0_H ++ ++#define IB62x0_OE_LOW (~(1 << 22 | 1 << 24 | 1 << 25 | 1 << 27)) ++#define IB62x0_OE_HIGH (~(0)) ++#define IB62x0_OE_VAL_LOW 0 ++#define IB62x0_OE_VAL_HIGH 0 ++ ++/* PHY related */ ++#define MV88E1116_LED_FCTRL_REG 10 ++#define MV88E1116_CPRSP_CR3_REG 21 ++#define MV88E1116_MAC_CTRL_REG 21 ++#define MV88E1116_PGADR_REG 22 ++#define MV88E1116_RGMII_TXTM_CTRL (1 << 4) ++#define MV88E1116_RGMII_RXTM_CTRL (1 << 5) ++ ++#endif /* __IB62x0_H */ +diff --git a/board/raidsonic/ib62x0/kwbimage.cfg b/board/raidsonic/ib62x0/kwbimage.cfg +new file mode 100644 +index 0000000..bd594eb +--- /dev/null ++++ b/board/raidsonic/ib62x0/kwbimage.cfg +@@ -0,0 +1,169 @@ ++# ++# Copyright (C) 2011-2012 ++# Gerald Kerma ++# Simon Baatz ++# Luka Perkov ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program. If not, see . ++# ++# Refer docs/README.kwimage for more details about how-to configure ++# and create kirkwood boot image ++# ++ ++# Boot Media configurations ++BOOT_FROM nand # change from nand to uart if building UART image ++NAND_ECC_MODE default ++NAND_PAGE_SIZE 0x0800 ++ ++# SOC registers configuration using bootrom header extension ++# Maximum KWBIMAGE_MAX_CONFIG configurations allowed ++ ++# Configure RGMII-0 interface pad voltage to 1.8V ++DATA 0xffd100e0 0x1b1b1b9b ++ ++#Dram initalization for SINGLE x16 CL=5 @ 400MHz ++DATA 0xffd01400 0x43000c30 # DDR Configuration register ++# bit13-0: 0xc30, (3120 DDR2 clks refresh rate) ++# bit23-14: 0x0, ++# bit24: 0x1, enable exit self refresh mode on DDR access ++# bit25: 0x1, required ++# bit29-26: 0x0, ++# bit31-30: 0x1, ++ ++DATA 0xffd01404 0x37543000 # DDR Controller Control Low ++# bit4: 0x0, addr/cmd in smame cycle ++# bit5: 0x0, clk is driven during self refresh, we don't care for APX ++# bit6: 0x0, use recommended falling edge of clk for addr/cmd ++# bit14: 0x0, input buffer always powered up ++# bit18: 0x1, cpu lock transaction enabled ++# bit23-20: 0x5, recommended value for CL=5 and STARTBURST_DEL disabled bit31=0 ++# bit27-24: 0x7, CL+2, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM ++# bit30-28: 0x3, required ++# bit31: 0x0, no additional STARTBURST delay ++ ++DATA 0xffd01408 0x22125451 # DDR Timing (Low) (active cycles value +1) ++# bit3-0: TRAS lsbs ++# bit7-4: TRCD ++# bit11-8: TRP ++# bit15-12: TWR ++# bit19-16: TWTR ++# bit20: TRAS msb ++# bit23-21: 0x0 ++# bit27-24: TRRD ++# bit31-28: TRTP ++ ++DATA 0xffd0140c 0x00000a33 # DDR Timing (High) ++# bit6-0: TRFC ++# bit8-7: TR2R ++# bit10-9: TR2W ++# bit12-11: TW2W ++# bit31-13: 0x0, required ++ ++DATA 0xffd01410 0x0000000c # DDR Address Control ++# bit1-0: 00, Cs0width (x8) ++# bit3-2: 11, Cs0size (1Gb) ++# bit5-4: 00, Cs1width (x8) ++# bit7-6: 11, Cs1size (1Gb) ++# bit9-8: 00, Cs2width (nonexistent ++# bit11-10: 00, Cs2size (nonexistent ++# bit13-12: 00, Cs3width (nonexistent ++# bit15-14: 00, Cs3size (nonexistent ++# bit16: 0, Cs0AddrSel ++# bit17: 0, Cs1AddrSel ++# bit18: 0, Cs2AddrSel ++# bit19: 0, Cs3AddrSel ++# bit31-20: 0x0, required ++ ++DATA 0xffd01414 0x00000000 # DDR Open Pages Control ++# bit0: 0, OpenPage enabled ++# bit31-1: 0x0, required ++ ++DATA 0xffd01418 0x00000000 # DDR Operation ++# bit3-0: 0x0, DDR cmd ++# bit31-4: 0x0, required ++ ++DATA 0xffd0141c 0x00000c52 # DDR Mode ++# bit2-0: 0x2, BurstLen=2 required ++# bit3: 0x0, BurstType=0 required ++# bit6-4: 0x4, CL=5 ++# bit7: 0x0, TestMode=0 normal ++# bit8: 0x0, DLL reset=0 normal ++# bit11-9: 0x6, auto-precharge write recovery ???????????? ++# bit12: 0x0, PD must be zero ++# bit31-13: 0x0, required ++ ++DATA 0xffd01420 0x00000040 # DDR Extended Mode ++# bit0: 0, DDR DLL enabled ++# bit1: 0, DDR drive strenght normal ++# bit2: 1, DDR ODT control lsd (disabled) ++# bit5-3: 0x0, required ++# bit6: 0, DDR ODT control msb, (disabled) ++# bit9-7: 0x0, required ++# bit10: 0, differential DQS enabled ++# bit11: 0, required ++# bit12: 0, DDR output buffer enabled ++# bit31-13: 0x0, required ++ ++DATA 0xffd01424 0x0000f17f # DDR Controller Control High ++# bit2-0: 0x7, required ++# bit3: 0x1, MBUS Burst Chop disabled ++# bit6-4: 0x7, required ++# bit7: 0x0, ++# bit8: 0x1, add writepath sample stage, must be 1 for DDR freq >= 300MHz ++# bit9: 0x0, no half clock cycle addition to dataout ++# bit10: 0x0, 1/4 clock cycle skew enabled for addr/ctl signals ++# bit11: 0x0, 1/4 clock cycle skew disabled for write mesh ++# bit15-12: 0xf, required ++# bit31-16: 0, required ++ ++DATA 0xffd01428 0x00085520 # DDR2 ODT Read Timing (default values) ++DATA 0xffd0147c 0x00008552 # DDR2 ODT Write Timing (default values) ++ ++DATA 0xffd01500 0x00000000 # CS[0]n Base address to 0x0 ++DATA 0xffd01504 0x0ffffff1 # CS[0]n Size ++# bit0: 0x1, Window enabled ++# bit1: 0x0, Write Protect disabled ++# bit3-2: 0x0, CS0 hit selected ++# bit23-4: 0xfffff, required ++# bit31-24: 0x0f, Size (i.e. 256MB) ++ ++DATA 0xffd01508 0x10000000 # CS[1]n Base address to 256Mb ++DATA 0xffd0150c 0x00000000 # CS[1]n Size, window disabled ++ ++DATA 0xffd01514 0x00000000 # CS[2]n Size, window disabled ++DATA 0xffd0151c 0x00000000 # CS[3]n Size, window disabled ++ ++DATA 0xffd01494 0x00030000 # DDR ODT Control (Low) ++# bit3-0: ODT0Rd, MODT[0] asserted during read from DRAM CS1 ++# bit7-4: ODT0Rd, MODT[0] asserted during read from DRAM CS0 ++# bit19-16:2, ODT0Wr, MODT[0] asserted during write to DRAM CS1 ++# bit23-20:1, ODT0Wr, MODT[0] asserted during write to DRAM CS0 ++ ++DATA 0xffd01498 0x00000000 # DDR ODT Control (High) ++# bit1-0: 0x0, ODT0 controlled by ODT Control (low) register above ++# bit3-2: 0x1, ODT1 active NEVER! ++# bit31-4: 0x0, required ++ ++DATA 0xffd0149c 0x0000e803 # CPU ODT Control ++DATA 0xffd01480 0x00000001 # DDR Initialization Control ++# bit0: 0x1, enable DDR init upon this register write ++ ++DATA 0xFFD20134 0x66666666 # L2 RAM Timing 0 Register ++DATA 0xFFD20138 0x66666666 # L2 RAM Timing 1 Register ++ ++# End of Header extension ++DATA 0x0 0x0 +diff --git a/boards.cfg b/boards.cfg +index 3cf75c3..23f84e8 100644 +--- a/boards.cfg ++++ b/boards.cfg +@@ -153,6 +153,7 @@ openrd_client arm arm926ejs openrd Marvell + openrd_ultimate arm arm926ejs openrd Marvell kirkwood openrd:BOARD_IS_OPENRD_ULTIMATE + rd6281a arm arm926ejs - Marvell kirkwood + sheevaplug arm arm926ejs - Marvell kirkwood ++ib62x0 arm arm926ejs ib62x0 raidsonic kirkwood + dockstar arm arm926ejs - Seagate kirkwood + jadecpu arm arm926ejs jadecpu syteco mb86r0x + mx25pdk arm arm926ejs mx25pdk freescale mx25 mx25pdk:IMX_CONFIG=board/freescale/mx25pdk/imximage.cfg +diff --git a/include/configs/ib62x0.h b/include/configs/ib62x0.h +new file mode 100644 +index 0000000..85856f2 +--- /dev/null ++++ b/include/configs/ib62x0.h +@@ -0,0 +1,150 @@ ++/* ++ * Copyright (C) 2011-2012 ++ * Gerald Kerma ++ * Luka Perkov ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program. If not, see . ++ */ ++ ++#ifndef _CONFIG_IB62x0_H ++#define _CONFIG_IB62x0_H ++ ++/* ++ * Version number information ++ */ ++#define CONFIG_IDENT_STRING " RaidSonic ICY BOX IB-NAS62x0" ++ ++/* ++ * High level configuration options ++ */ ++#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ ++#define CONFIG_KIRKWOOD /* SOC Family Name */ ++#define CONFIG_KW88F6281 /* SOC Name */ ++#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ ++ ++/* ++ * Machine type ++ */ ++#define CONFIG_MACH_TYPE MACH_TYPE_NAS6210 ++ ++/* ++ * Compression configuration ++ */ ++#define CONFIG_BZIP2 ++#define CONFIG_LZMA ++#define CONFIG_LZO ++ ++/* ++ * Commands configuration ++ */ ++#define CONFIG_SYS_NO_FLASH /* declare no flash (NOR/SPI) */ ++#define CONFIG_SYS_MVFS ++#include ++#define CONFIG_CMD_ENV ++#define CONFIG_CMD_IDE ++#define CONFIG_CMD_MII ++#define CONFIG_CMD_NAND ++#define CONFIG_CMD_PING ++#define CONFIG_CMD_USB ++ ++/* ++ * mv-common.h should be defined after CMD configs since it used them ++ * to enable certain macros ++ */ ++#include "mv-common.h" ++ ++#undef CONFIG_SYS_PROMPT ++#define CONFIG_SYS_PROMPT "ib62x0 => " ++ ++/* ++ * Environment variables configuration ++ */ ++#ifdef CONFIG_CMD_NAND ++#define CONFIG_ENV_IS_IN_NAND ++#define CONFIG_ENV_SECT_SIZE 0x20000 ++#else ++#define CONFIG_ENV_IS_NOWHERE ++#endif ++#define CONFIG_ENV_SIZE 0x20000 ++#define CONFIG_ENV_OFFSET 0x80000 ++ ++/* ++ * Default environment variables ++ */ ++#define CONFIG_BOOTCOMMAND \ ++ "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ ++ "ubi part rootfs; " \ ++ "ubifsmount rootfs; " \ ++ "ubifsload 0x800000 ${kernel}; " \ ++ "bootm 0x800000" ++ ++#define CONFIG_MTDPARTS \ ++ "mtdparts=orion_nand:" \ ++ "0x80000@0x0(uboot)," \ ++ "0x20000@0x80000(uboot_env)," \ ++ "-@0xa0000(rootfs)\0" ++ ++#define CONFIG_EXTRA_ENV_SETTINGS \ ++ "console=console=ttyS0,115200\0" \ ++ "mtdids=nand0=orion_nand\0" \ ++ "mtdparts="CONFIG_MTDPARTS \ ++ "kernel=/boot/uImage\0" \ ++ "bootargs_root=noinitrd ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs\0" ++ ++/* ++ * Ethernet driver configuration ++ */ ++#ifdef CONFIG_CMD_NET ++#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ ++#define CONFIG_PHY_BASE_ADR 0 ++#undef CONFIG_RESET_PHY_R ++#endif /* CONFIG_CMD_NET */ ++ ++/* ++ * SATA driver configuration ++ */ ++#ifdef CONFIG_CMD_IDE ++#define __io ++#define CONFIG_IDE_PREINIT ++#define CONFIG_DOS_PARTITION ++#define CONFIG_MVSATA_IDE_USE_PORT0 ++#define CONFIG_MVSATA_IDE_USE_PORT1 ++#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET ++#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET ++#endif /* CONFIG_CMD_IDE */ ++ ++/* ++ * RTC driver configuration ++ */ ++#ifdef CONFIG_CMD_DATE ++#define CONFIG_RTC_MV ++#endif /* CONFIG_CMD_DATE */ ++ ++/* ++ * File system ++ */ ++#define CONFIG_CMD_EXT2 ++#define CONFIG_CMD_FAT ++#define CONFIG_CMD_JFFS2 ++#define CONFIG_CMD_UBI ++#define CONFIG_CMD_UBIFS ++#define CONFIG_RBTREE ++#define CONFIG_MTD_DEVICE ++#define CONFIG_MTD_PARTITIONS ++#define CONFIG_CMD_MTDPARTS ++ ++#endif /* _CONFIG_IB62x0_H */ diff --git a/package/uboot-kirkwood/patches/0002-kwboot.patch b/package/uboot-kirkwood/patches/0002-kwboot.patch new file mode 100644 index 0000000000..091d6a164c --- /dev/null +++ b/package/uboot-kirkwood/patches/0002-kwboot.patch @@ -0,0 +1,873 @@ +http://lists.denx.de/pipermail/u-boot/2012-May/125296.html +http://patchwork.ozlabs.org/patch/161566/ +--- + +diff --git a/doc/kwboot.1 b/doc/kwboot.1 +new file mode 100644 +index 0000000..ed08398 +--- /dev/null ++++ b/doc/kwboot.1 +@@ -0,0 +1,84 @@ ++.TH KWBOOT 1 "2012-05-19" ++ ++.SH NAME ++kwboot \- Boot Marvell Kirkwood SoCs over a serial link. ++.SH SYNOPSIS ++.B kwboot ++.RB [ "-b \fIimage\fP" ] ++.RB [ "-p" ] ++.RB [ "-t" ] ++.RB [ "-B \fIbaudrate\fP" ] ++.RB \fITTY\fP ++.SH "DESCRIPTION" ++ ++The \fBmkimage\fP program boots boards based on Marvell's Kirkwood ++platform over their integrated UART. Boot image files will typically ++contain a second stage boot loader, such as U-Boot. The image file ++must conform to Marvell's BootROM firmware image format ++(\fIkwbimage\fP), created using a tool such as \fBmkimage\fP. ++ ++Following power-up or a system reset, system BootROM code polls the ++UART for a brief period of time, sensing a handshake message which ++initiates an image upload. This program sends this boot message until ++it receives a positive acknowledgement. The image is transfered using ++Xmodem. ++ ++Additionally, this program implements a minimal terminal mode, which ++can be used either standalone, or entered immediately following boot ++image transfer completion. This is often useful to catch early boot ++messages, or to manually interrupt a default boot procedure performed ++by the second-stage loader. ++ ++.SH "OPTIONS" ++ ++.TP ++.BI "\-b \fIimage\fP" ++Handshake; then upload file \fIimage\fP over \fITTY\fP. ++ ++Note that for the encapsulated boot code to be executed, \fIimage\fP ++must be of type "UART boot" (0x69). Boot images of different types, ++such as backup images of vendor firmware downloaded from flash memory ++(type 0x8B), will not work (or not as expected). See \fB-p\fP for a ++workaround. ++ ++This mode writes handshake status and upload progress indication to ++stdout. ++ ++.TP ++.BI "\-p" ++In combination with \fB-b\fP, patches the header in \fIimage\fP prior ++to upload, to "UART boot" type. ++ ++This option attempts on-the-fly conversion of some none-UART image ++types, such as images which were originally formatted to be stored in ++flash memory. ++ ++Conversion is performed in memory. The contents of \fIimage\fP will ++not be altered. ++ ++.TP ++.BI "\-t" ++Run a terminal program, connecting standard input and output to ++.RB \fITTY\fP. ++ ++If used in combination with \fB-b\fP, terminal mode is entered ++immediately following a successful image upload. ++ ++If standard I/O streams connect to a console, this mode will terminate ++after receiving 'ctrl-\\' followed by 'c' from console input. ++ ++.TP ++.BI "\-B \fIbaudrate\fP" ++Adjust the baud rate on \fITTY\fP. Default rate is 115200. ++ ++.SH "SEE ALSO" ++.PP ++\fBmkimage\fP(1) ++ ++.SH "AUTHORS" ++ ++Daniel Stodden ++.br ++Luka Perkov ++.br ++David Purdy +diff --git a/tools/Makefile b/tools/Makefile +index 8993fdd..8097d95 100644 +--- a/tools/Makefile ++++ b/tools/Makefile +@@ -72,6 +72,7 @@ BIN_FILES-$(CONFIG_SMDK5250) += mksmdk5250spl$(SFX) + BIN_FILES-$(CONFIG_MX28) += mxsboot$(SFX) + BIN_FILES-$(CONFIG_NETCONSOLE) += ncb$(SFX) + BIN_FILES-$(CONFIG_SHA1_CHECK_UB_IMG) += ubsha1$(SFX) ++BIN_FILES-$(CONFIG_KIRKWOOD) += kwboot$(SFX) + + # Source files which exist outside the tools directory + EXT_OBJ_FILES-$(CONFIG_BUILD_ENVCRC) += common/env_embedded.o +@@ -101,6 +102,7 @@ OBJ_FILES-$(CONFIG_NETCONSOLE) += ncb.o + NOPED_OBJ_FILES-y += os_support.o + OBJ_FILES-$(CONFIG_SHA1_CHECK_UB_IMG) += ubsha1.o + NOPED_OBJ_FILES-y += ublimage.o ++OBJ_FILES-$(CONFIG_KIRKWOOD) += kwboot.o + + # Don't build by default + #ifeq ($(ARCH),ppc) +@@ -234,6 +236,10 @@ $(obj)ncb$(SFX): $(obj)ncb.o + $(obj)ubsha1$(SFX): $(obj)os_support.o $(obj)sha1.o $(obj)ubsha1.o + $(HOSTCC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^ + ++$(obj)kwboot$(SFX): $(obj)kwboot.o ++ $(HOSTCC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^ ++ $(HOSTSTRIP) $@ ++ + # Some of the tool objects need to be accessed from outside the tools directory + $(obj)%.o: $(SRCTREE)/common/%.c + $(HOSTCC) -g $(HOSTCFLAGS_NOPED) -c -o $@ $< +diff --git a/tools/kwboot.c b/tools/kwboot.c +new file mode 100644 +index 0000000..e773f01 +--- /dev/null ++++ b/tools/kwboot.c +@@ -0,0 +1,742 @@ ++/* ++ * Boot a Marvell Kirkwood SoC, with Xmodem over UART0. ++ * ++ * (c) 2012 Daniel Stodden ++ * ++ * References: marvell.com, "88F6180, 88F6190, 88F6192, and 88F6281 ++ * Integrated Controller: Functional Specifications" December 2, ++ * 2008. Chapter 24.2 "BootROM Firmware". ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "kwbimage.h" ++ ++#ifdef __GNUC__ ++#define PACKED __attribute((packed)) ++#else ++#define PACKED ++#endif ++ ++/* ++ * Marvell BootROM UART Sensing ++ */ ++ ++static unsigned char kwboot_msg_boot[] = { ++ 0xBB, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77 ++}; ++ ++#define KWBOOT_MSG_REQ_DELAY 10 /* ms */ ++#define KWBOOT_MSG_RSP_TIMEO 50 /* ms */ ++ ++/* ++ * Xmodem Transfers ++ */ ++ ++#define SOH 1 /* sender start of block header */ ++#define EOT 4 /* sender end of block transfer */ ++#define ACK 6 /* target block ack */ ++#define NAK 21 /* target block negative ack */ ++#define CAN 24 /* target/sender transfer cancellation */ ++ ++struct kwboot_block { ++ uint8_t soh; ++ uint8_t pnum; ++ uint8_t _pnum; ++ uint8_t data[128]; ++ uint8_t csum; ++} PACKED; ++ ++#define KWBOOT_BLK_RSP_TIMEO 1000 /* ms */ ++ ++static int kwboot_verbose; ++ ++static void ++kwboot_printv(const char *fmt, ...) ++{ ++ va_list ap; ++ ++ if (kwboot_verbose) { ++ va_start(ap, fmt); ++ vprintf(fmt, ap); ++ va_end(ap); ++ fflush(stdout); ++ } ++} ++ ++static void ++__spinner(void) ++{ ++ const char seq[] = { '-', '\\', '|', '/' }; ++ const int div = 8; ++ static int state, bs; ++ ++ if (state % div == 0) { ++ fputc(bs, stdout); ++ fputc(seq[state / div % sizeof(seq)], stdout); ++ fflush(stdout); ++ } ++ ++ bs = '\b'; ++ state++; ++} ++ ++static void ++kwboot_spinner(void) ++{ ++ if (kwboot_verbose) ++ __spinner(); ++} ++ ++static void ++__progress(int pct, char c) ++{ ++ const int width = 70; ++ static const char *nl = ""; ++ static int pos; ++ ++ if (pos % width == 0) ++ printf("%s%3d %% [", nl, pct); ++ ++ fputc(c, stdout); ++ ++ nl = "]\n"; ++ pos++; ++ ++ if (pct == 100) { ++ while (pos++ < width) ++ fputc(' ', stdout); ++ fputs(nl, stdout); ++ } ++ ++ fflush(stdout); ++ ++} ++ ++static void ++kwboot_progress(int _pct, char c) ++{ ++ static int pct; ++ ++ if (_pct != -1) ++ pct = _pct; ++ ++ if (kwboot_verbose) ++ __progress(pct, c); ++} ++ ++static int ++kwboot_tty_recv(int fd, void *buf, size_t len, int timeo) ++{ ++ int rc, nfds; ++ fd_set rfds; ++ struct timeval tv; ++ ssize_t n; ++ ++ rc = -1; ++ ++ FD_ZERO(&rfds); ++ FD_SET(fd, &rfds); ++ ++ tv.tv_sec = 0; ++ tv.tv_usec = timeo * 1000; ++ if (tv.tv_usec > 1000000) { ++ tv.tv_sec += tv.tv_usec / 1000000; ++ tv.tv_usec %= 1000000; ++ } ++ ++ do { ++ nfds = select(fd + 1, &rfds, NULL, NULL, &tv); ++ if (nfds < 0) ++ goto out; ++ if (!nfds) { ++ errno = ETIMEDOUT; ++ goto out; ++ } ++ ++ n = read(fd, buf, len); ++ if (n < 0) ++ goto out; ++ ++ buf = (char *)buf + n; ++ len -= n; ++ } while (len > 0); ++ ++ rc = 0; ++out: ++ return rc; ++} ++ ++static int ++kwboot_tty_send(int fd, const void *buf, size_t len) ++{ ++ int rc; ++ ssize_t n; ++ ++ rc = -1; ++ ++ do { ++ n = write(fd, buf, len); ++ if (n < 0) ++ goto out; ++ ++ buf = (char *)buf + n; ++ len -= n; ++ } while (len > 0); ++ ++ rc = tcdrain(fd); ++out: ++ return rc; ++} ++ ++static int ++kwboot_tty_send_char(int fd, unsigned char c) ++{ ++ return kwboot_tty_send(fd, &c, 1); ++} ++ ++static speed_t ++kwboot_tty_speed(int baudrate) ++{ ++ switch (baudrate) { ++ case 115200: ++ return B115200; ++ case 57600: ++ return B57600; ++ case 38400: ++ return B38400; ++ case 19200: ++ return B19200; ++ case 9600: ++ return B9600; ++ } ++ ++ return -1; ++} ++ ++static int ++kwboot_open_tty(const char *path, speed_t speed) ++{ ++ int rc, fd; ++ struct termios tio; ++ ++ rc = -1; ++ ++ fd = open(path, O_RDWR|O_NOCTTY|O_NDELAY); ++ if (fd < 0) ++ goto out; ++ ++ memset(&tio, 0, sizeof(tio)); ++ ++ tio.c_iflag = 0; ++ tio.c_cflag = CREAD|CLOCAL|CS8; ++ ++ tio.c_cc[VMIN] = 1; ++ tio.c_cc[VTIME] = 10; ++ ++ cfsetospeed(&tio, speed); ++ cfsetispeed(&tio, speed); ++ ++ rc = tcsetattr(fd, TCSANOW, &tio); ++ if (rc) ++ goto out; ++ ++ rc = fd; ++out: ++ if (rc < 0) { ++ if (fd >= 0) ++ close(fd); ++ } ++ ++ return rc; ++} ++ ++static int ++kwboot_bootmsg(int tty, void *msg) ++{ ++ int rc; ++ char c; ++ ++ kwboot_printv("Sending boot message. Please reboot the target..."); ++ ++ do { ++ rc = tcflush(tty, TCIOFLUSH); ++ if (rc) ++ break; ++ ++ rc = kwboot_tty_send(tty, msg, 8); ++ if (rc) { ++ usleep(KWBOOT_MSG_REQ_DELAY * 1000); ++ continue; ++ } ++ ++ rc = kwboot_tty_recv(tty, &c, 1, KWBOOT_MSG_RSP_TIMEO); ++ ++ kwboot_spinner(); ++ ++ } while (rc || c != NAK); ++ ++ kwboot_printv("\n"); ++ ++ return rc; ++} ++ ++static int ++kwboot_xm_makeblock(struct kwboot_block *block, const void *data, ++ size_t size, int pnum) ++{ ++ const size_t blksz = sizeof(block->data); ++ size_t n; ++ int i; ++ ++ block->pnum = pnum; ++ block->_pnum = ~block->pnum; ++ ++ n = size < blksz ? size : blksz; ++ memcpy(&block->data[0], data, n); ++ memset(&block->data[n], 0, blksz - n); ++ ++ block->csum = 0; ++ for (i = 0; i < n; i++) ++ block->csum += block->data[i]; ++ ++ return n; ++} ++ ++static int ++kwboot_xm_sendblock(int fd, struct kwboot_block *block) ++{ ++ int rc, retries; ++ char c; ++ ++ retries = 16; ++ do { ++ rc = kwboot_tty_send(fd, block, sizeof(*block)); ++ if (rc) ++ break; ++ ++ rc = kwboot_tty_recv(fd, &c, 1, KWBOOT_BLK_RSP_TIMEO); ++ if (rc) ++ break; ++ ++ if (c != ACK) ++ kwboot_progress(-1, '+'); ++ ++ } while (c == NAK && retries-- > 0); ++ ++ rc = -1; ++ ++ switch (c) { ++ case ACK: ++ rc = 0; ++ break; ++ case NAK: ++ errno = EBADMSG; ++ break; ++ case CAN: ++ errno = ECANCELED; ++ break; ++ default: ++ errno = EPROTO; ++ break; ++ } ++ ++ return rc; ++} ++ ++static int ++kwboot_xmodem(int tty, const void *_data, size_t size) ++{ ++ const uint8_t *data = _data; ++ int rc, pnum, N, err; ++ ++ pnum = 1; ++ N = 0; ++ ++ kwboot_printv("Sending boot image...\n"); ++ ++ do { ++ struct kwboot_block block; ++ int n; ++ ++ n = kwboot_xm_makeblock(&block, ++ data + N, size - N, ++ pnum++); ++ if (n < 0) ++ goto can; ++ ++ if (!n) ++ break; ++ ++ rc = kwboot_xm_sendblock(tty, &block); ++ if (rc) ++ goto out; ++ ++ N += n; ++ kwboot_progress(N * 100 / size, '.'); ++ } while (1); ++ ++ rc = kwboot_tty_send_char(tty, EOT); ++ ++out: ++ return rc; ++ ++can: ++ err = errno; ++ kwboot_tty_send_char(tty, CAN); ++ errno = err; ++ goto out; ++} ++ ++static int ++kwboot_term_pipe(int in, int out, char *quit, int *s) ++{ ++ ssize_t nin, nout; ++ char _buf[128], *buf = _buf; ++ ++ nin = read(in, buf, sizeof(buf)); ++ if (nin < 0) ++ return -1; ++ ++ if (quit) { ++ int i; ++ ++ for (i = 0; i < nin; i++) { ++ if (*buf == quit[*s]) { ++ (*s)++; ++ if (!quit[*s]) ++ return 0; ++ buf++; ++ nin--; ++ } else ++ while (*s > 0) { ++ nout = write(out, quit, *s); ++ if (nout <= 0) ++ return -1; ++ (*s) -= nout; ++ } ++ } ++ } ++ ++ while (nin > 0) { ++ nout = write(out, buf, nin); ++ if (nout <= 0) ++ return -1; ++ nin -= nout; ++ } ++ ++ return 0; ++} ++ ++static int ++kwboot_terminal(int tty) ++{ ++ int rc, in, s; ++ char *quit = "\34c"; ++ struct termios otio, tio; ++ ++ rc = -1; ++ ++ in = STDIN_FILENO; ++ if (isatty(in)) { ++ rc = tcgetattr(in, &otio); ++ if (!rc) { ++ tio = otio; ++ cfmakeraw(&tio); ++ rc = tcsetattr(in, TCSANOW, &tio); ++ } ++ if (rc) { ++ perror("tcsetattr"); ++ goto out; ++ } ++ ++ kwboot_printv("[Type Ctrl-%c + %c to quit]\r\n", ++ quit[0]|0100, quit[1]); ++ } else ++ in = -1; ++ ++ rc = 0; ++ s = 0; ++ ++ do { ++ fd_set rfds; ++ int nfds = 0; ++ ++ FD_SET(tty, &rfds); ++ nfds = nfds < tty ? tty : nfds; ++ ++ if (in >= 0) { ++ FD_SET(in, &rfds); ++ nfds = nfds < in ? in : nfds; ++ } ++ ++ nfds = select(nfds + 1, &rfds, NULL, NULL, NULL); ++ if (nfds < 0) ++ break; ++ ++ if (FD_ISSET(tty, &rfds)) { ++ rc = kwboot_term_pipe(tty, STDOUT_FILENO, NULL, NULL); ++ if (rc) ++ break; ++ } ++ ++ if (FD_ISSET(in, &rfds)) { ++ rc = kwboot_term_pipe(in, tty, quit, &s); ++ if (rc) ++ break; ++ } ++ } while (quit[s] != 0); ++ ++ tcsetattr(in, TCSANOW, &otio); ++out: ++ return rc; ++} ++ ++static void * ++kwboot_mmap_image(const char *path, size_t *size, int prot) ++{ ++ int rc, fd, flags; ++ struct stat st; ++ void *img; ++ ++ rc = -1; ++ fd = -1; ++ img = NULL; ++ ++ fd = open(path, O_RDONLY); ++ if (fd < 0) ++ goto out; ++ ++ rc = fstat(fd, &st); ++ if (rc) ++ goto out; ++ ++ flags = (prot & PROT_WRITE) ? MAP_PRIVATE : MAP_SHARED; ++ ++ img = mmap(NULL, st.st_size, prot, flags, fd, 0); ++ if (img == MAP_FAILED) { ++ img = NULL; ++ goto out; ++ } ++ ++ rc = 0; ++ *size = st.st_size; ++out: ++ if (rc && img) { ++ munmap(img, st.st_size); ++ img = NULL; ++ } ++ if (fd >= 0) ++ close(fd); ++ ++ return img; ++} ++ ++static uint8_t ++kwboot_img_csum8(void *_data, size_t size) ++{ ++ uint8_t *data = _data, csum; ++ ++ for (csum = 0; size-- > 0; data++) ++ csum += *data; ++ ++ return csum; ++} ++ ++static int ++kwboot_img_patch_hdr(void *img, size_t size) ++{ ++ int rc; ++ bhr_t *hdr; ++ uint8_t csum; ++ const size_t hdrsz = sizeof(*hdr); ++ ++ rc = -1; ++ hdr = img; ++ ++ if (size < hdrsz) { ++ errno = EINVAL; ++ goto out; ++ } ++ ++ csum = kwboot_img_csum8(hdr, hdrsz) - hdr->checkSum; ++ if (csum != hdr->checkSum) { ++ errno = EINVAL; ++ goto out; ++ } ++ ++ if (hdr->blockid == IBR_HDR_UART_ID) { ++ rc = 0; ++ goto out; ++ } ++ ++ hdr->blockid = IBR_HDR_UART_ID; ++ ++ hdr->nandeccmode = IBR_HDR_ECC_DISABLED; ++ hdr->nandpagesize = 0; ++ ++ hdr->srcaddr = hdr->ext ++ ? sizeof(struct kwb_header) ++ : sizeof(*hdr); ++ ++ hdr->checkSum = kwboot_img_csum8(hdr, hdrsz) - csum; ++ ++ rc = 0; ++out: ++ return rc; ++} ++ ++static void ++kwboot_usage(FILE *stream, char *progname) ++{ ++ fprintf(stream, ++ "Usage: %s -b [ -p ] [ -t ] " ++ "[-B ] \n", progname); ++ fprintf(stream, "\n"); ++ fprintf(stream, " -b : boot \n"); ++ fprintf(stream, " -p: patch to type 0x69 (uart boot)\n"); ++ fprintf(stream, "\n"); ++ fprintf(stream, " -t: mini terminal\n"); ++ fprintf(stream, "\n"); ++ fprintf(stream, " -B : set baud rate\n"); ++ fprintf(stream, "\n"); ++} ++ ++int ++main(int argc, char **argv) ++{ ++ const char *ttypath, *imgpath; ++ int rv, rc, tty, term, prot, patch; ++ void *bootmsg; ++ void *img; ++ size_t size; ++ speed_t speed; ++ ++ rv = 1; ++ tty = -1; ++ bootmsg = NULL; ++ imgpath = NULL; ++ img = NULL; ++ term = 0; ++ patch = 0; ++ size = 0; ++ speed = B115200; ++ ++ kwboot_verbose = isatty(STDOUT_FILENO); ++ ++ do { ++ int c = getopt(argc, argv, "hb:ptB:"); ++ if (c < 0) ++ break; ++ ++ switch (c) { ++ case 'b': ++ bootmsg = kwboot_msg_boot; ++ imgpath = optarg; ++ break; ++ ++ case 'p': ++ patch = 1; ++ break; ++ ++ case 't': ++ term = 1; ++ break; ++ ++ case 'B': ++ speed = kwboot_tty_speed(atoi(optarg)); ++ if (speed == -1) ++ goto usage; ++ break; ++ ++ case 'h': ++ rv = 0; ++ default: ++ goto usage; ++ } ++ } while (1); ++ ++ if (!bootmsg && !term) ++ goto usage; ++ ++ if (patch && !imgpath) ++ goto usage; ++ ++ if (argc - optind < 1) ++ goto usage; ++ ++ ttypath = argv[optind++]; ++ ++ tty = kwboot_open_tty(ttypath, speed); ++ if (tty < 0) { ++ perror(ttypath); ++ goto out; ++ } ++ ++ if (imgpath) { ++ prot = PROT_READ | (patch ? PROT_WRITE : 0); ++ ++ img = kwboot_mmap_image(imgpath, &size, prot); ++ if (!img) { ++ perror(imgpath); ++ goto out; ++ } ++ } ++ ++ if (patch) { ++ rc = kwboot_img_patch_hdr(img, size); ++ if (rc) { ++ fprintf(stderr, "%s: Invalid image.\n", imgpath); ++ goto out; ++ } ++ } ++ ++ if (bootmsg) { ++ rc = kwboot_bootmsg(tty, bootmsg); ++ if (rc) { ++ perror("bootmsg"); ++ goto out; ++ } ++ } ++ ++ if (img) { ++ rc = kwboot_xmodem(tty, img, size); ++ if (rc) { ++ perror("xmodem"); ++ goto out; ++ } ++ } ++ ++ if (term) { ++ rc = kwboot_terminal(tty); ++ if (rc && !(errno == EINTR)) { ++ perror("terminal"); ++ goto out; ++ } ++ } ++ ++ rv = 0; ++out: ++ if (tty >= 0) ++ close(tty); ++ ++ if (img) ++ munmap(img, size); ++ ++ return rv; ++ ++usage: ++ kwboot_usage(rv ? stderr : stdout, basename(argv[0])); ++ goto out; ++} diff --git a/package/uboot-kirkwood/patches/0003-ide_bus.patch b/package/uboot-kirkwood/patches/0003-ide_bus.patch new file mode 100644 index 0000000000..c94d63da9d --- /dev/null +++ b/package/uboot-kirkwood/patches/0003-ide_bus.patch @@ -0,0 +1,17 @@ +http://lists.denx.de/pipermail/u-boot/2012-April/122594.html +http://patchwork.ozlabs.org/patch/159129/ +--- + +diff --git a/include/ide.h b/include/ide.h +index 8ecc9dd..385e909 100644 +--- a/include/ide.h ++++ b/include/ide.h +@@ -24,7 +24,7 @@ + #ifndef _IDE_H + #define _IDE_H + +-#define IDE_BUS(dev) (dev >> 1) ++#define IDE_BUS(dev) (dev / (CONFIG_SYS_IDE_MAXDEVICE / CONFIG_SYS_IDE_MAXBUS)) + + #define ATA_CURR_BASE(dev) (CONFIG_SYS_ATA_BASE_ADDR+ide_bus_offset[IDE_BUS(dev)]) + diff --git a/package/uboot-kirkwood/patches/010-dockstar.patch b/package/uboot-kirkwood/patches/010-dockstar.patch deleted file mode 100644 index e2d891d578..0000000000 --- a/package/uboot-kirkwood/patches/010-dockstar.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/boards.cfg -+++ b/boards.cfg -@@ -251,6 +251,7 @@ guruplug arm arm926ejs - Marvell kirkw - mv88f6281gtw_ge arm arm926ejs - Marvell kirkwood - openrd_base arm arm926ejs - Marvell kirkwood - sheevaplug arm arm926ejs - Marvell kirkwood -+dockstar arm arm926ejs - Marvell kirkwood - imx27lite arm arm926ejs imx27lite logicpd mx27 - magnesium arm arm926ejs imx27lite logicpd mx27 - omap5912osk arm arm926ejs - ti omap diff --git a/package/uboot-kirkwood/patches/020-iconnect.patch b/package/uboot-kirkwood/patches/020-iconnect.patch deleted file mode 100644 index 525d38544f..0000000000 --- a/package/uboot-kirkwood/patches/020-iconnect.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/boards.cfg -+++ b/boards.cfg -@@ -252,6 +252,7 @@ mv88f6281gtw_ge arm arm926ejs - Marvell - openrd_base arm arm926ejs - Marvell kirkwood - sheevaplug arm arm926ejs - Marvell kirkwood - dockstar arm arm926ejs - Marvell kirkwood -+iconnect arm arm926ejs - Marvell kirkwood - imx27lite arm arm926ejs imx27lite logicpd mx27 - magnesium arm arm926ejs imx27lite logicpd mx27 - omap5912osk arm arm926ejs - ti omap diff --git a/package/uboot-kirkwood/patches/100-iconnect.patch b/package/uboot-kirkwood/patches/100-iconnect.patch new file mode 100644 index 0000000000..d2f35ad5a7 --- /dev/null +++ b/package/uboot-kirkwood/patches/100-iconnect.patch @@ -0,0 +1,10 @@ +--- a/boards.cfg ++++ b/boards.cfg +@@ -137,6 +137,7 @@ hawkboard_uart arm + enbw_cmc arm arm926ejs enbw_cmc enbw davinci + calimain arm arm926ejs calimain omicron davinci + dns325 arm arm926ejs - d-link kirkwood ++iconnect arm arm926ejs - iomega kirkwood + km_kirkwood arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_DISABLE_PCI + km_kirkwood_pci arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_RECONFIG_XLX + mgcoge3un arm arm926ejs km_arm keymile kirkwood diff --git a/package/uboot-kirkwood/patches/110-dockstar.patch b/package/uboot-kirkwood/patches/110-dockstar.patch new file mode 100644 index 0000000000..4ff7e57bbb --- /dev/null +++ b/package/uboot-kirkwood/patches/110-dockstar.patch @@ -0,0 +1,35 @@ +--- a/include/configs/dockstar.h ++++ b/include/configs/dockstar.h +@@ -83,22 +83,19 @@ + * Default environment variables + */ + #define CONFIG_BOOTCOMMAND \ +- "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ +- "ubi part root; " \ +- "ubifsmount root; " \ +- "ubifsload 0x800000 ${kernel}; " \ +- "ubifsload 0x1100000 ${initrd}; " \ +- "bootm 0x800000 0x1100000" ++ "${x_bootcmd_kernel}; " \ ++ "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ ++ "${x_bootcmd_usb}; bootm 0x6400000;" + +-#define CONFIG_MTDPARTS "mtdparts=orion_nand:1m(uboot),-(root)\0" ++#define CONFIG_MTDPARTS \ ++ "orion_nand:1M(u-boot),1M@1M(second_stage_u-boot)," \ ++ "3M@2M(kernel),32M@5M(rootfs),219M@37M(data) rw\0" + + #define CONFIG_EXTRA_ENV_SETTINGS \ +- "console=console=ttyS0,115200\0" \ +- "mtdids=nand0=orion_nand\0" \ +- "mtdparts="CONFIG_MTDPARTS \ +- "kernel=/boot/uImage\0" \ +- "initrd=/boot/uInitrd\0" \ +- "bootargs_root=ubi.mtd=1 root=ubi0:root rootfstype=ubifs ro\0" ++ "x_bootargs=console=ttyS0,115200 mtdparts="CONFIG_MTDPARTS \ ++ "x_bootcmd_kernel=nand read 0x6400000 0x200000 0x300000\0" \ ++ "x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0" \ ++ "x_bootcmd_usb=usb start\0" + + /* + * Ethernet Driver configuration