lantiq: switch to kernel 4.14

Use kernel 4.14 by default.

Signed-off-by: Mathias Kresin <dev@kresin.me>
This commit is contained in:
Mathias Kresin 2018-03-21 08:39:41 +01:00
parent 0678cc850c
commit d7b7483343
117 changed files with 1 additions and 28894 deletions

View file

@ -12,7 +12,7 @@ FEATURES:=squashfs
SUBTARGETS:=xrx200 xway xway_legacy falcon ase
MAINTAINER:=John Crispin <john@phrozen.org>
KERNEL_PATCHVER:=4.9
KERNEL_PATCHVER:=4.14
define Target/Description
Build firmware images for Lantiq SoC

View file

@ -1,24 +0,0 @@
CONFIG_ADM6996_PHY=y
CONFIG_CPU_MIPS32_R1=y
# CONFIG_CPU_MIPS32_R2 is not set
CONFIG_CPU_MIPSR1=y
CONFIG_CRC16=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_GENERIC_PLATFORM=y
# CONFIG_ISDN is not set
# CONFIG_LBDAF is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_NLS=y
# CONFIG_PSB6970_PHY is not set
# CONFIG_RTL8366_SMI is not set
CONFIG_SOC_AMAZON_SE=y
# CONFIG_SOC_XWAY is not set
CONFIG_USB=y
CONFIG_USB_COMMON=y
# CONFIG_USB_EHCI_HCD is not set
CONFIG_USB_SUPPORT=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_ZLIB_INFLATE=y

View file

@ -1,199 +0,0 @@
CONFIG_ARCH_BINFMT_ELF_STATE=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
CONFIG_ARCH_HAS_RESET_CONTROLLER=y
# CONFIG_ARCH_HAS_SG_CHAIN is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_CEVT_R4K=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_CPU_GENERIC_DUMP_TLB=y
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_CPU_HAS_RIXI=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_CPU_MIPS32=y
# CONFIG_CPU_MIPS32_R1 is not set
CONFIG_CPU_MIPS32_R2=y
CONFIG_CPU_MIPSR2=y
CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
CONFIG_CPU_R4K_CACHE_TLB=y
CONFIG_CPU_R4K_FPU=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_CPU_SUPPORTS_MSA=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CSRC_R4K=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DTC=y
# CONFIG_DT_EASY50712 is not set
CONFIG_EARLY_PRINTK=y
CONFIG_ETHERNET_PACKET_MANGLE=y
CONFIG_FIXED_PHY=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_IO=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_MM_LANTIQ=y
CONFIG_GPIO_STP_XWAY=y
CONFIG_GPIO_SYSFS=y
CONFIG_HANDLE_DOMAIN_IRQ=y
CONFIG_HARDWARE_WATCHPOINTS=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_HAVE_CBPF_JIT=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_IDE=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HW_HAS_PCI=y
CONFIG_HW_RANDOM=y
CONFIG_HZ=250
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
CONFIG_HZ_PERIODIC=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IRQCHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_MIPS_CPU=y
CONFIG_IRQ_WORK=y
CONFIG_LANTIQ=y
CONFIG_LANTIQ_DT_NONE=y
CONFIG_LANTIQ_ETOP=y
CONFIG_LANTIQ_WDT=y
# CONFIG_LANTIQ_XRX200 is not set
CONFIG_LEDS_GPIO=y
CONFIG_LIBFDT=y
CONFIG_MDIO_BOARDINFO=y
CONFIG_MIPS=y
CONFIG_MIPS_ASID_BITS=8
CONFIG_MIPS_ASID_SHIFT=0
CONFIG_MIPS_CLOCK_VSYSCALL=y
# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
CONFIG_MIPS_CMDLINE_FROM_DTB=y
# CONFIG_MIPS_ELF_APPENDED_DTB is not set
# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_MIPS_MACHINE is not set
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_NO_APPENDED_DTB is not set
CONFIG_MIPS_RAW_APPENDED_DTB=y
CONFIG_MIPS_SPRAM=y
# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_GEOMETRY=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_LANTIQ=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_SPLIT_BRNIMAGE_FW=y
CONFIG_MTD_SPLIT_EVA_FW=y
CONFIG_MTD_SPLIT_FIRMWARE=y
CONFIG_MTD_SPLIT_TPLINK_FW=y
CONFIG_MTD_SPLIT_UIMAGE_FW=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_PER_CPU_KM=y
CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
# CONFIG_NO_IOPORT_MAP is not set
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_GPIO=y
CONFIG_OF_IRQ=y
CONFIG_OF_MDIO=y
CONFIG_OF_NET=y
CONFIG_PCI_DRIVERS_LEGACY=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_LANTIQ=y
# CONFIG_PINCTRL_SINGLE is not set
CONFIG_PINCTRL_XWAY=y
CONFIG_PSB6970_PHY=y
# CONFIG_RCU_STALL_COMMON is not set
CONFIG_RESET_CONTROLLER=y
CONFIG_RTL8366RB_PHY=y
CONFIG_RTL8366_SMI=y
# CONFIG_SCHED_INFO is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_SENSORS_LTQ_CPUTEMP is not set
# CONFIG_SERIAL_8250 is not set
CONFIG_SERIAL_LANTIQ=y
# CONFIG_SOC_AMAZON_SE is not set
# CONFIG_SOC_FALCON is not set
CONFIG_SOC_TYPE_XWAY=y
CONFIG_SOC_XWAY=y
CONFIG_SPI=y
CONFIG_SPI_LANTIQ_SSC=y
CONFIG_SPI_MASTER=y
CONFIG_SRCU=y
CONFIG_SWAP_IO_SPACE=y
CONFIG_SWCONFIG=y
CONFIG_SWPHY=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_SYS_SUPPORTS_MIPS16=y
CONFIG_SYS_SUPPORTS_MULTITHREADING=y
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_USE_OF=y
# CONFIG_XRX200_PHY_FW is not set

View file

@ -1,10 +0,0 @@
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_SPLIT_FIRMWARE_NAME="linux"
CONFIG_PINCTRL_FALCON=y
# CONFIG_PSB6970_PHY is not set
# CONFIG_RTL8366_SMI is not set
CONFIG_SOC_FALCON=y
# CONFIG_SOC_TYPE_XWAY is not set
# CONFIG_SOC_XWAY is not set
CONFIG_SPI_FALCON=y

View file

@ -1,102 +0,0 @@
/dts-v1/;
#include "danube.dtsi"
/ {
compatible = "audiocodes,mp-252", "lantiq,xway", "lantiq,danube";
model = "AudioCodes MediaPack MP-252";
chosen {
bootargs = "console=ttyLTQ0,115200";
};
memory@0 {
reg = <0x0 0x4000000>;
};
sram@1F000000 {
vmmc@107000 {
status = "okay";
gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
};
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x0 0x20000>;
read-only;
};
partition@20000 {
label = "uboot_env";
reg = <0x20000 0x20000>;
};
partition@40000 {
label = "boardconfig";
reg = <0x40000 0x60000>;
read-only;
};
partition@a0000 {
label = "firmware";
reg = <0xa0000 0xf20000>;
};
partition@fc0000 {
label = "sysconfig";
reg = <0xfc0000 0x40000>;
};
partition@0x1000000 {
label = "rootfs_data";
reg = <0x1000000 0x1000000>;
};
};
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
exin {
lantiq,groups = "exin1";
lantiq,function = "exin";
};
pci {
lantiq,groups = "gnt1", "req1";
lantiq,function = "pci";
};
};
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
};
etop@E180000 {
phy-mode = "rmii";
};
pci@E105400 {
status = "okay";
};
};
};

View file

@ -1,120 +0,0 @@
/dts-v1/;
#include "amazonse.dtsi"
/ {
compatible = "allnet,all0333cj", "lantiq,xway", "lantiq,ase";
model = "Allnet ALL0333CJ DSL Modem";
chosen {
bootargs = "console=ttyLTQ0,115200";
aliases {
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-dsl = &dsl;
led-internet = &online_green;
};
};
memory@0 {
reg = <0x0 0x1000000>;
};
fpi@b0000000 {
etop@E180000 {
phy-mode = "mii";
};
};
fpi@10000000 {
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
asc {
lantiq,groups = "asc";
lantiq,function = "asc";
};
keys_in {
lantiq,pins = "io0",/* "io25", */"io29";
lantiq,pull = <2>;
lantiq,open-drain = <1>;
};
};
};
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x10000>;
read-only;
};
partition@10000 {
label = "firmware";
reg = <0x10000 0x3ef200>;
};
partition@3ff200 {
label = "uboot_env";
reg = <0x3ff200 0xc00>;
read-only;
};
partition@3ffe00 {
label = "dummy_bits";
reg = <0x3ffe00 0x200>;
read-only;
};
};
};
};
};
gpio-leds {
compatible = "gpio-leds";
/* power led: red=off, green=on */
power: power {
label = "all0333cj:green:power";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
lan: lan {
label = "all0333cj:green:lan";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
dsl: dsl {
label = "all0333cj:green:dsl";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
online_green: online {
label = "all0333cj:green:online";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
online_red {
label = "all0333cj:red:online";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
};
};

View file

@ -1,232 +0,0 @@
/dts-v1/;
#include "danube.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "arcadyan,arv4510pw", "lantiq,xway", "lantiq,danube";
model = "Wippies, Elisa";
chosen {
bootargs = "console=ttyLTQ0,115200";
};
aliases {
led-boot = &power;
led-failsafe = &power2;
led-running = &power;
led-dsl = &adsl;
led-internet = &internet;
led-usb = &usb;
led-usb2 = &usb2;
led-wifi = &wifi;
};
memory@0 {
reg = <0x0 0x2000000>;
};
sram@1F000000 {
vmmc@107000 {
status = "okay";
};
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x1000000>;
#address-cells = <1>;
#size-cells = <1>;
lantiq,noxip;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x40000>;
read-only;
};
partition@40000 {
label = "uboot_env";
reg = <0x40000 0x20000>;
read-only;
};
partition@60000 {
label = "firmware";
reg = <0x60000 0xfa0000>;
};
};
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
ebu {
lantiq,groups = "ebu a23";
lantiq,function = "ebu";
lantiq,open-drain = <0>;
lantiq,output = <1>;
};
stp {
lantiq,groups = "stp";
lantiq,function = "stp";
lantiq,open-drain = <0>;
lantiq,output = <1>;
};
exin {
lantiq,groups = "exin1", "exin2";
lantiq,function = "exin";
lantiq,output = <0>;
};
pci_in {
lantiq,groups = "req1", "req2";
lantiq,function = "pci";
lantiq,output = <0>;
};
pci_out {
lantiq,groups = "gnt1", "gnt2";
lantiq,function = "pci";
lantiq,open-drain = <0>;
lantiq,pull = <0>;
lantiq,output = <1>;
};
pci_rst {
lantiq,pins = "io21";
lantiq,open-drain = <0>;
lantiq,output = <1>;
};
buttons {
lantiq,pins = "io3", "io14";
lantiq,pull = <2>;
lantiq,output = <0>;
};
};
};
gpios: stp@E100BB0 {
status = "okay";
lantiq,groups = <0x7>;
};
etop@E180000 {
phy-mode = "rmii";
};
pci@E105400 {
status = "okay";
lantiq,external-clock;
interrupt-map = <
0x6000 0 0 1 &icu0 135
0x7800 0 0 1 &icu0 66
0x7800 0 0 2 &icu0 66
0x7800 0 0 3 &icu0 66
>;
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
req-mask = <0x7>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
wps {
label = "wps";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
reset {
label = "reset";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
power: power {
label = "power";
gpios = <&gpios 21 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
power2: power2 {
label = "power2";
gpios = <&gpios 20 GPIO_ACTIVE_HIGH>;
};
lan1 {
label = "lan1";
gpios = <&gpios 19 GPIO_ACTIVE_HIGH>;
};
lan2 {
label = "lan2";
gpios = <&gpios 18 GPIO_ACTIVE_HIGH>;
};
lan3 {
label = "lan3";
gpios = <&gpios 17 GPIO_ACTIVE_HIGH>;
};
lan4 {
label = "lan4";
gpios = <&gpios 16 GPIO_ACTIVE_HIGH>;
};
wifi: wifi {
label = "wifi";
gpios = <&gpios 15 GPIO_ACTIVE_HIGH>;
};
adsl: adsl {
label = "adsl";
gpios = <&gpios 14 GPIO_ACTIVE_HIGH>;
};
internet: internet {
label = "internet";
gpios = <&gpios 13 GPIO_ACTIVE_HIGH>;
};
internet2 {
label = "internet2";
gpios = <&gpios 12 GPIO_ACTIVE_HIGH>;
};
voip {
label = "voip";
gpios = <&gpios 11 GPIO_ACTIVE_HIGH>;
};
phone {
label = "phone";
gpios = <&gpios 10 GPIO_ACTIVE_HIGH>;
};
phone2 {
label = "phone2";
gpios = <&gpios 9 GPIO_ACTIVE_HIGH>;
};
usb: usb {
label = "usb";
gpios = <&gpios 8 GPIO_ACTIVE_HIGH>;
};
usb2: usb2 {
label = "usb2";
gpios = <&gpios 7 GPIO_ACTIVE_HIGH>;
};
usb3 {
label = "usb3";
gpios = <&gpios 6 GPIO_ACTIVE_HIGH>;
};
unlabeled {
label = "unlabeled";
gpios = <&gpios 5 GPIO_ACTIVE_HIGH>;
};
};
};

View file

@ -1,8 +0,0 @@
/dts-v1/;
#include "ARV4518PWR01.dtsi"
/ {
compatible = "arcadyan,arv4518pwr01", "lantiq,xway", "lantiq,danube";
model = "SMC7908A-ISP";
};

View file

@ -1,198 +0,0 @@
#include "danube.dtsi"
#include <dt-bindings/input/input.h>
/ {
chosen {
bootargs = "console=ttyLTQ0,115200";
};
aliases {
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-dsl = &dsl;
led-internet = &online;
led-usb = &usb;
led-wifi = &wifi;
};
memory@0 {
reg = <0x0 0x4000000>;
};
sram@1F000000 {
vmmc@107000 {
status = "okay";
gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
};
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x10000>; /* 64 KB */
read-only;
};
partition@10000 {
label = "uboot_env";
reg = <0x10000 0x10000>; /* 64 KB */
read-only;
};
partition@20000 {
label = "firmware";
reg = <0x20000 0x3d0000>;
};
boardconfig: partition@400000 {
label = "boardconfig";
reg = <0x3f0000 0x10000>;
read-only;
};
};
};
gpiomm: gpiomm@4000000 {
compatible = "lantiq,gpio-mm";
reg = <1 0x0 0x10 >;
#address-cells = <1>;
#size-cells = <1>;
#gpio-cells = <2>;
gpio-controller;
lantiq,shadow = <0x0>;
};
ath5k_eep {
compatible = "ath5k,eeprom";
ath,eep-flash = <&boardconfig 0x400>;
ath,mac-offset = <0x16>;
ath,mac-increment = <1>;
ath,eep-swap;
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
ebu {
lantiq,groups = "ebu cs1";
lantiq,function = "ebu";
};
pci_in {
lantiq,groups = "req1", "req2";
lantiq,function = "pci";
lantiq,open-drain = <1>;
lantiq,pull = <2>;
lantiq,output = <0>;
};
pci_out {
lantiq,groups = "gnt1", "gnt2";
lantiq,function = "pci";
lantiq,pull = <0>;
lantiq,output = <1>;
};
};
};
etop@E180000 {
phy-mode = "mii";
mtd-mac-address = <&boardconfig 0x16>;
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
};
pci@E105400 {
status = "okay";
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
req-mask = <0xf>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
rfkill {
label = "rfkill";
gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
reset {
label = "reset";
gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
power: power {
label = "power";
gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
dsl: dsl {
label = "dsl";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
online: online {
label = "online";
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
};
wifi: wifi {
label = "wifi";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
};
wps {
label = "wps";
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
};
dsl2 {
label = "dsl2";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
};
usb: usb {
label = "usb";
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
voice {
label = "voice";
gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
};
fxs1 {
label = "fxs1";
gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
};
fxs2 {
label = "fxs2";
gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
};
fxo {
label = "fxo";
gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
};
};
};

View file

@ -1,14 +0,0 @@
/dts-v1/;
#include "ARV4518PWR01.dtsi"
/ {
compatible = "arcadyan,arv4518pwr01a", "lantiq,xway", "lantiq,danube";
model = "SMC7908A-ISP, Airties WAV-221";
fpi@10000000 {
pci@E105400 {
lantiq,external-clock;
};
};
};

View file

@ -1,195 +0,0 @@
/dts-v1/;
#include "danube.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "arcadyan,arv4519pw", "lantiq,xway", "lantiq,danube";
model = "Vodafone Netfaster IAD 2, Pirelli P.RG A4201G";
chosen {
bootargs = "console=ttyLTQ0,115200";
};
aliases {
led-boot = &power_green;
led-failsafe = &power_red;
led-running = &power_green;
led-dsl = &dsl;
led-internet = &internet_green;
led-usb = &usb;
led-wifi = &wifi;
};
memory@0 {
reg = <0x0 0x2000000>;
};
sram@1F000000 {
vmmc@107000 {
status = "okay";
gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
};
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x10000>;
read-only;
};
partition@10000 {
label = "uboot_env";
reg = <0x10000 0x10000>;
};
partition@20000 {
label = "firmware";
reg = <0x20000 0x3d0000>;
};
boardconfig: partition@3f0000 {
label = "boardconfig";
reg = <0x3f0000 0x10000>;
read-only;
};
};
};
gpiomm: gpiomm@4000000 {
compatible = "lantiq,gpio-mm";
reg = <1 0x0 0x10 >;
#address-cells = <1>;
#size-cells = <1>;
#gpio-cells = <2>;
gpio-controller;
lantiq,shadow = <0x400>;
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
ebu {
lantiq,groups = "ebu cs1";
lantiq,function = "ebu";
};
};
};
etop@E180000 {
phy-mode = "mii";
mtd-mac-address = <&boardconfig 0x16>;
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
};
pci@E105400 {
status = "okay";
lantiq,external-clock;
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
req-mask = <0xf>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
rfkill {
label = "rfkill";
gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
reset {
label = "reset";
gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
power_green: power {
label = "arv4519pw:green:power";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
power_red: power2 {
label = "arv4519pw:red:power";
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
};
wifi: wifi {
label = "arv4519pw:green:wlan";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
};
dsl: dsl {
label = "arv4519pw:green:dsl";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
internet_green: online {
label = "arv4519pw:green:internet";
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
};
online2 {
label = "arv4519pw:red:internet";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
};
usb: usb {
label = "arv4519pw:green:usb";
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
voip {
label = "arv4519pw:green:voip";
gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
};
fxs1 {
label = "arv4519pw:green:phone1";
gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
};
fxs2 {
label = "arv4519pw:green:phone2";
gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
};
fxo {
label = "arv4519pw:green:line";
gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
};
wps2 {
label = "arv4519pw:green:wps";
gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
};
wps {
label = "arv4519pw:orange:wps";
gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
};
wps3 {
label = "arv4519pw:red:wps";
gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
};
};
};

View file

@ -1,221 +0,0 @@
/dts-v1/;
#include "danube.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "arcadyan,arv4520pw", "lantiq,xway", "lantiq,danube";
model = "Easybox 800, WAV-281";
chosen {
bootargs = "console=ttyLTQ0,115200";
};
aliases {
led-boot = &power_blue;
led-failsafe = &power_red;
led-running = &power_blue;
led-dsl = &dsl;
led-internet = &internet_blue;
led-usb = &usb;
led-wifi = &wifi;
};
memory@0 {
reg = <0x0 0x2000000>;
};
sram@1F000000 {
vmmc@107000 {
status = "okay";
gpios = <&gpio 31 GPIO_ACTIVE_HIGH
&gpiomm 7 GPIO_ACTIVE_HIGH>;
};
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x800000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x20000>;
read-only;
};
partition@20000 {
label = "uboot_env";
reg = <0x20000 0x10000>;
read-only;
};
partition@30000 {
label = "firmware";
reg = <0x30000 0x3c0000>;
};
boardconfig: partition@7f0000 {
label = "boardconfig";
reg = <0x3f0000 0x10000>;
read-only;
};
};
};
gpiomm: gpiomm@4000000 {
compatible = "lantiq,gpio-mm";
reg = <1 0x0 0x10 >;
#address-cells = <1>;
#size-cells = <1>;
#gpio-cells = <2>;
gpio-controller;
lantiq,shadow = <0x400>;
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
ebu {
lantiq,groups = "ebu cs1";
lantiq,function = "ebu";
};
pci_in {
lantiq,groups = "req1";
lantiq,function = "pci";
lantiq,open-drain = <1>;
lantiq,pull = <2>;
lantiq,output = <0>;
};
pci_out {
lantiq,groups = "gnt1";
lantiq,function = "pci";
lantiq,output = <1>;
};
pci_rst {
lantiq,pins = "io21";
lantiq,open-drain = <0>;
lantiq,pull = <0>;
};
};
};
etop@E180000 {
phy-mode = "rmii";
mtd-mac-address = <&boardconfig 0x16>;
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 28 GPIO_ACTIVE_HIGH>;
};
pci@E105400 {
status = "okay";
lantiq,external-clock;
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
};
};
// gpiomm 10 - switch
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
rfkill {
label = "wps";
gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
reset {
label = "reset";
gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
power_blue: power {
label = "arv4520pw:blue:power";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
dsl: dsl {
label = "arv4520pw:blue:dsl";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
internet_blue: internet {
label = "arv4520pw:blue:internet";
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
};
power_red: power2 {
label = "arv4520pw:red:power";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
};
wps {
label = "arv4520pw:yellow:wps";
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
};
wps2 {
label = "arv4520pw:red:wps";
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
};
/*
wps green is missing
*/
fxs1 {
label = "arv4520pw:blue:telefon1";
gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
};
fxs2 {
label = "arv4520pw:blue:telefon2";
gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
};
isdn {
label = "arv4520pw:blue:isdn";
gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
};
fxo {
label = "arv4520pw:blue:line";
gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
};
voice {
label = "arv4520pw:blue:sprache";
gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
};
usb: usb {
label = "arv4520pw:blue:usb";
gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
};
wifi: wifi {
label = "arv4520pw:blue:wifi";
gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
};
internet2 {
label = "arv4520pw:red:internet";
gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
};
/*
info is missing
*/
};
};

View file

@ -1,169 +0,0 @@
/dts-v1/;
#include "danube.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "arcadyan,arv4525pw", "lantiq,xway", "lantiq,danube";
model = "Speedport W501V Typ A";
chosen {
bootargs = "console=ttyLTQ0,115200";
};
aliases {
/* we dont have a power led, lets use the online led */
led-boot = &online;
led-failsafe = &online;
led-dsl = &dsl;
led-internet = &online;
led-wifi = &wifi;
};
memory@0 {
reg = <0x0 0x2000000>;
};
sram@1F000000 {
vmmc@107000 {
status = "okay";
gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
};
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x10000>;
read-only;
};
partition@10000 {
label = "uboot_env";
reg = <0x10000 0x10000>;
read-only;
};
partition@20000 {
label = "firmware";
reg = <0x20000 0x3d0000>;
};
boardconfig: partition@400000 {
label = "boardconfig";
reg = <0x3f0000 0x10000>;
read-only;
};
};
};
ath5k_eep {
compatible = "ath5k,eeprom";
ath,eep-flash = <&boardconfig 0x400>;
ath,mac-offset = <0x0>;
ath,eep-swap;
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
pci_in {
lantiq,groups = "req1";
lantiq,function = "pci";
lantiq,open-drain = <1>;
lantiq,pull = <2>;
lantiq,output = <0>;
};
pci_out {
lantiq,groups = "gnt1";
lantiq,function = "pci";
lantiq,output = <1>;
};
pci_rst {
lantiq,pins = "io21";
lantiq,pull = <2>;
lantiq,output = <1>;
};
relay {
lantiq,pins = "io31";
lantiq,output = <1>;
};
};
};
etop@E180000 {
phy-mode = "mii";
mtd-mac-address = <&boardconfig 0x16>;
};
pci@E105400 {
status = "okay";
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
};
};
/*
#define ARV4525PW_PHYRESET 13
#define ARV4525PW_RELAY 31
*/
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
wps {
label = "wps";
gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
reset {
label = "reset";
gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
fxo {
label = "arv4525pw:green:festnetz";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
fxs {
label = "arv4525pw:green:internet";
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
};
dsl: dsl {
label = "arv4525pw:green:t-dsl";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
};
wifi: wifi {
label = "arv4525pw:green:wlan";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
};
online: online {
label = "arv4525pw:green:online";
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
};
};
};

View file

@ -1,237 +0,0 @@
/dts-v1/;
#include "danube.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "arcadyan,arv452cqw", "lantiq,xway", "lantiq,danube";
model = "Arcor 801";
chosen {
bootargs = "console=ttyLTQ0,115200";
};
aliases {
led-boot = &power_blue;
led-failsafe = &power_red;
led-running = &power_blue;
led-dsl = &dsl_blue;
led-usb = &usb;
led-wifi = &wifi;
};
memory@0 {
reg = <0x0 0x2000000>;
};
sram@1F000000 {
vmmc@107000 {
status = "okay";
gpios = <&gpio 31 GPIO_ACTIVE_HIGH
&gpiomm 7 GPIO_ACTIVE_HIGH>;
};
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x10000>;
read-only;
};
partition@10000 {
label = "uboot_env";
reg = <0x10000 0x10000>;
read-only;
};
partition@20000 {
label = "firmware";
reg = <0x20000 0x3d0000>;
};
boardconfig: partition@3f0000 {
label = "boardconfig";
reg = <0x3f0000 0x10000>;
read-only;
};
};
};
ath5k_eep {
compatible = "ath5k,eeprom";
ath,eep-flash = <&boardconfig 0x400>;
ath,mac-offset = <0x0>;
ath,eep-swap;
};
gpiomm: gpiomm@4000000 {
compatible = "lantiq,gpio-mm";
reg = <1 0x0 0x10>;
#address-cells = <1>;
#size-cells = <1>;
#gpio-cells = <2>;
gpio-controller;
lantiq,shadow = <0x77f>;
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
ebu {
lantiq,groups = "ebu cs1";
lantiq,function = "ebu";
};
pci_in {
lantiq,groups = "req1";
lantiq,function = "pci";
lantiq,open-drain = <1>;
lantiq,pull = <2>;
lantiq,output = <0>;
};
pci_out {
lantiq,groups = "gnt1";
lantiq,function = "pci";
lantiq,output = <1>;
};
pci_rst {
lantiq,pins = "io21";
lantiq,pull = <0>;
lantiq,output = <1>;
};
leds {
lantiq,pins = "io3", "io5", "io6", "io7", "io9";
lantiq,output = <1>;
};
};
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 28 GPIO_ACTIVE_HIGH>;
};
etop@E180000 {
phy-mode = "rmii";
mtd-mac-address = <&boardconfig 0x16>;
};
pci@E105400 {
status = "okay";
lantiq,external-clock;
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
};
};
/*
#define ARV452CPW_SWITCH_RESET 110
*/
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
rfkill {
label = "rfkill";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
wps {
label = "wps";
gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
reset {
label = "reset";
gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
power_blue: power0 {
label = "arv452cqw:blue:power";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
dsl_blue: dsl {
label = "arv452cqw:blue:dsl";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
isdn {
label = "arv452cqw:blue:isdn";
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
};
power_red: power1 {
label = "arv452cqw:red:power";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
};
wps {
label = "arv452cqw:blue:wps";
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
};
wps1 {
label = "arv452cqw:yellow:wps";
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
};
fxs1 {
label = "arv452cqw:blue:telefon1";
gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
};
fxs2 {
label = "arv452cqw:blue:telefon2";
gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
};
wps2 {
label = "arv452cqw:red:wps";
gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
};
fxo {
label = "arv452cqw:blue:line";
gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
};
voice {
label = "arv452cqw:blue:sprache";
gpios = <&gpiomm 4 1>;
};
usb: usb {
label = "arv452cqw:blue:usb";
gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
};
wifi: wifi {
label = "arv452cqw:blue:wlan";
gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
};
/*
internet blue and internet red are missing
dsl2 and dsl3 are not referenced in manual
*/
dsl2 {
label = "arv452cqw:yellow:dsl";
gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>;
};
dsl3 {
label = "arv452cqw:red:dsl";
gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
};
};
};

View file

@ -1,165 +0,0 @@
/dts-v1/;
#include "danube.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "arcadyan,arv7506pw11", "lantiq,xway", "lantiq,danube";
model = "Alice/O2 IAD 4421";
chosen {
bootargs = "console=ttyLTQ0,115200";
};
aliases {
led-boot = &power;
led-failsafe = &power_red;
led-running = &power;
led-dsl = &dsl;
led-internet = &internet;
led-wifi = &wlan;
};
memory@0 {
reg = <0x0 0x4000000>;
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x800000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x40000>;
read-only;
};
partition@40000 {
label = "uboot_env";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x7a0000>;
};
boardconfig: partition@7f0000 {
label = "board_config";
reg = <0x7f0000 0x10000>;
read-only;
};
};
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
pci {
lantiq,groups = "gnt1";
lantiq,function = "pci";
lantiq,output = <1>;
};
pci_rst {
lantiq,pins = "io21";
lantiq,pull = <2>;
lantiq,output = <1>;
};
};
};
/* GPIO 19: switch reset */
etop@E180000 {
phy-mode = "rmii";
mtd-mac-address = <&boardconfig 0x16>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
rfkill {
label = "rfkill";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
reset {
label = "reset";
gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
wlan: wlan {
label = "arv7506pw11:green:wlan";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
power: power {
label = "arv7506pw11:green:power";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
dsl: dsl {
label = "arv7506pw11:green:dsl";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
internet: internet {
label = "arv7506pw11:green:internet";
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
};
power_red: power_red {
label = "arv7506pw11:red:power";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
};
internet_red {
label = "arv7506pw11:red:internet";
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
};
info {
label = "arv7506pw11:green:info";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
};
telefon {
label = "arv7506pw11:green:telefon";
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
};
info_red {
label = "arv7506pw11:red:info";
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
};
};
};
&pci0 {
status = "okay";
lantiq,external-clock;
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
wifi@1814,3592 {
compatible = "pci1814,3592";
reg = <0x7000 0 0 0 0>;
ralink,mtd-eeprom = <&boardconfig 0x410>;
ralink,mtd-eeprom-swap;
mtd-mac-address = <&boardconfig 0x16>;
mtd-mac-address-increment = <1>;
};
};

View file

@ -1,196 +0,0 @@
/dts-v1/;
#include "danube.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "arcadyan,arv7510pw22", "lantiq,xway", "lantiq,danube";
model = "Astoria Networks ARV7510PW22";
chosen {
bootargs = "console=ttyLTQ0,115200";
};
aliases {
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-dsl = &internet;
led-usb = &umts;
led-wifi = &wlan;
};
memory@0 {
reg = <0x0 0x4000000>;
};
sram@1F000000 {
vmmc@107000 {
status = "okay";
gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
};
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x1000000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x40000>;
read-only;
};
partition@40000 {
label = "uboot_env";
reg = <0x40000 0x20000>;
read-only;
};
partition@60000 {
label = "firmware";
reg = <0x60000 0xf80000>;
};
boardconfig: partition@fe0000 {
label = "board_config";
reg = <0xfe0000 0x20000>;
read-only;
};
};
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
exin {
lantiq,groups = "exin1";
lantiq,function = "exin";
lantiq,pull = <2>;
lantiq,output = <0>;
};
pci_in {
lantiq,groups = "req1", "req2";
lantiq,function = "pci";
lantiq,open-drain = <1>;
lantiq,pull = <2>;
lantiq,output = <0>;
};
pci_out {
lantiq,groups = "gnt1";
lantiq,function = "pci";
lantiq,output = <1>;
};
pci_rst {
lantiq,pins = "io21";
lantiq,pull = <2>;
lantiq,output = <1>;
};
pins_out {
lantiq,pins = "io2", "io4", "io8", "io9", "io10", "io15", "io20";
lantiq,output = <1>;
};
pins_in {
lantiq,pins = "io11", "io12", "io28";
lantiq,open-drain = <1>;
lantiq,pull = <2>;
lantiq,output = <0>;
};
};
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
};
etop@E180000 {
/* Switch reset 19 */
phy-mode = "mii";
mtd-mac-address = <&boardconfig 0x16>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
rfkill {
label = "rfkill";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
restart {
label = "restart";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
};
reset {
label = "reset";
gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
power: power {
label = "power";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
internet: internet {
label = "internet";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
wlan: wlan {
label = "wlan";
gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
};
umts: 3g {
label = "3g";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
message {
label = "message";
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
};
};
};
&pci0 {
status = "okay";
lantiq,external-clock;
interrupt-map = <
0x7000 0 0 1 &icu0 30
0x7800 0 0 1 &icu0 135
0x7800 0 0 2 &icu0 135
0x7800 0 0 3 &icu0 135
>;
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
req-mask = <0x3>;
wifi@1814,3592 {
compatible = "pci1814,3592";
reg = <0x7000 0 0 0 0>;
ralink,mtd-eeprom = <&boardconfig 0x410>;
ralink,mtd-eeprom-swap;
};
};

View file

@ -1,232 +0,0 @@
/dts-v1/;
#include "danube.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "arcadyan,arv7518pw", "lantiq,xway", "lantiq,danube";
model = "Astoria Networks ARV7518PW";
chosen {
bootargs = "console=ttyLTQ0,115200";
};
aliases {
led-boot = &power_green;
led-failsafe = &power_red;
led-running = &power_green;
led-dsl = &dsl;
led-internet = &online_green;
led-usb = &usb;
led-wifi = &wifi;
};
memory@0 {
reg = <0x0 0x4000000>;
};
sram@1F000000 {
vmmc@107000 {
status = "okay";
};
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x10000>;
read-only;
};
partition@10000 {
label = "uboot_env";
reg = <0x10000 0x10000>;
};
partition@20000 {
label = "firmware";
reg = <0x20000 0x7d0000>;
};
boardconfig: partition@400000 {
label = "boardconfig";
reg = <0x7f0000 0x10000>;
read-only;
};
};
};
gpiomm: gpiomm@4000000 {
compatible = "lantiq,gpio-mm";
reg = <1 0x0 0x10 >;
#address-cells = <1>;
#size-cells = <1>;
#gpio-cells = <2>;
gpio-controller;
lantiq,shadow = <0x0>;
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
ebu {
lantiq,groups = "ebu cs1";
lantiq,function = "ebu";
};
pci_in {
lantiq,groups = "req1";
lantiq,function = "pci";
lantiq,open-drain = <1>;
lantiq,pull = <2>;
lantiq,output = <0>;
};
pci_out {
lantiq,groups = "gnt1";
lantiq,function = "pci";
lantiq,pull = <0>;
lantiq,output = <1>;
};
pci_rst {
lantiq,pins = "io21";
lantiq,pull = <2>;
lantiq,output = <1>;
};
leds {
lantiq,pins = "io2", "io4", "io5", "io6", "io7", "io8", "io19";
lantiq,output = <1>;
};
keys {
lantiq,pins = "io28", "io30";
lantiq,output = <0>;
lantiq,pull = <2>;
lantiq,open-drain = <1>;
};
};
};
etop@E180000 {
phy-mode = "mii";
mtd-mac-address = <&boardconfig 0x16>;
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
};
};
/*
#define SWITCH_RESET 13
*/
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
rfkill {
label = "rfkill";
gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
reset {
label = "reset";
gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
power_green: power {
label = "arv7518pw:green:power";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
dsl: dsl {
label = "arv7518pw:green:dsl";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
online_green: online {
label = "arv7518pw:green:internet";
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
};
wifi: wifi {
label = "arv7518pw:green:wlan";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
};
power_red: power2 {
label = "arv7518pw:red:power";
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
};
online2 {
label = "arv7518pw:red:internet";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
};
usb: usb {
label = "arv7518pw:green:usb";
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
voice {
label = "arv7518pw:green:voip";
gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
};
fxs1 {
label = "arv7518pw:green:phone1";
gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
};
fxs2 {
label = "arv7518pw:green:phone2";
gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
};
unlabeled {
label = "arv7518pw:amber:unlabeled";
gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
};
wps {
label = "arv7518pw:amber:wps";
gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
};
wps2 {
label = "arv7518pw:green:wps";
gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
};
wps3 {
label = "arv7518pw:red:wps";
gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
};
};
};
&pci0 {
status = "okay";
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
lantiq,external-clock;
req-mask = <0xf>;
wifi@168c,0029 {
compatible = "pci168c,0029";
reg = <0x7000 0 0 0 0>;
qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
mtd-mac-address = <&boardconfig 0x16>;
mtd-mac-address-increment = <1>;
};
};

View file

@ -1,229 +0,0 @@
/dts-v1/;
#include "danube.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "arcadyan,arv7519pw", "lantiq,xway", "lantiq,danube";
model = "Astoria Networks ARV7519PW";
chosen {
bootargs = "console=ttyLTQ0,115200";
};
aliases {
led-boot = &power;
led-failsafe = &power2;
led-running = &power;
led-dsl = &dsl;
led-internet = &online;
led-wifi = &wifi;
};
memory@0 {
reg = <0x0 0x4000000>;
};
sram@1F000000 {
vmmc@107000 {
status = "okay";
};
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x40000>;
read-only;
};
partition@40000 {
label = "uboot_env";
reg = <0x40000 0x20000>;
};
partition@60000 {
label = "firmware";
reg = <0x60000 0xf80000>;
};
boardconfig: partition@fe0000 {
label = "board_config";
reg = <0xfe0000 0x20000>;
read-only;
};
};
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
ebu {
lantiq,groups = "ebu cs1";
lantiq,function = "ebu";
};
pci_in {
lantiq,groups = "req1";
lantiq,function = "pci";
lantiq,open-drain = <1>;
lantiq,pull = <2>;
lantiq,output = <0>;
};
pci_out {
lantiq,groups = "gnt1";
lantiq,function = "pci";
lantiq,pull = <0>;
lantiq,output = <1>;
};
pci_rst {
lantiq,pins = "io21";
lantiq,pull = <2>;
lantiq,output = <1>;
};
switch_rst {
lantiq,pins = "io19";
lantiq,pull = <2>;
lantiq,output = <1>;
};
};
};
etop@E180000 {
phy-mode = "mii";
mtd-mac-address = <&boardconfig 0x16>;
};
/* warning: passive port
only works with active devices */
ifxhcd@E101000 {
status = "okay";
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
rfkill {
label = "rfkill";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
reset {
label = "reset";
gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
power: power {
label = "power";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
power2: power2 {
label = "power2";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
online: online {
label = "online";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
online2 {
label = "online2";
gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
};
wifi: wifi {
label = "wifi";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
wifi2 {
label = "wifi2";
gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
};
wifi3 {
label = "wifi3";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
};
voice {
label = "voice";
gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
};
wps {
label = "wps";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
wps2 {
label = "wps2";
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
};
wps3 {
label = "wps3";
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
};
dsl: dsl {
label = "dsl";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
lan {
label = "lan";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
tv {
label = "tv";
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
};
upgrade {
label = "upgrade";
gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
};
};
/* is there another way to "reserve" the GPIO? */
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
switch {
gpio-export,name = "switch";
gpio-export,output = <1>;
gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
};
};
};
&pci0 {
status = "okay";
lantiq,external-clock;
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
req-mask = <0xf>;
wifi@0,0 {
compatible = "pci0,0";
reg = <0x7000 0 0 0 0>;
ralink,mtd-eeprom = <&boardconfig 0x410>;
ralink,mtd-eeprom-swap;
};
};

View file

@ -1,231 +0,0 @@
/dts-v1/;
#include "vr9.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "arcadyan,arv7519rw22", "lantiq,xway", "lantiq,vr9";
model = "Orange Livebox 2.1";
chosen {
bootargs = "console=ttyLTQ0,115200";
};
aliases {
led-boot = &power_green;
led-failsafe = &power_green;
led-running = &power_green;
led-dsl = &internet_green;
};
memory@0 {
reg = <0x0 0x8000000>;
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x0 0x60000>;
read-only;
};
partition@60000 {
label = "uboot-env";
reg = <0x60000 0x20000>;
read-only;
};
partition@80000 {
label = "firmware";
reg = <0x80000 0x1f00000>;
};
boardconfig: partition@1f80000 {
label = "boardconfig";
reg = <0x1f80000 0x80000>;
read-only;
};
};
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
mdio {
lantiq,groups = "mdio";
lantiq,function = "mdio";
};
pcie-rst {
lantiq,pins = "io21";
lantiq,pull = <0>;
lantiq,output = <1>;
};
};
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
};
ifxhcd@E106000 {
status = "okay";
gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
};
pcie@d900000 {
status = "okay";
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
};
};
gphy-xrx200 {
compatible = "lantiq,phy-xrx200";
firmware1 = "lantiq/xrx200_phy22f_a14.bin"; /*VR9 1.1*/
firmware2 = "lantiq/xrx200_phy22f_a22.bin"; /*VR9 1.2*/
phys = [ 00 01 ];
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
rfkill {
label = "rfkill";
gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
wps {
label = "wps";
gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
gpio-leds {
compatible = "gpio-leds";
lan_green {
label = "arv7519rw22:green:lan";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
internet_red {
label = "arv7519rw22:red:internet";
gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
};
power_green: power_green {
label = "arv7519rw22:green:power";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
alarm_blue {
label = "arv7519rw22:blue:alarm";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
internet_orange {
label = "arv7519rw22:orange:internet";
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
internet_green: internet_green {
label = "arv7519rw22:green:internet";
gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
};
voice_green {
label = "arv7519rw22:green:voice";
gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
};
};
};
&eth0 {
lan: interface@0 {
compatible = "lantiq,xrx200-pdi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
mtd-mac-address = <&boardconfig 0x16>;
lantiq,switch;
ethernet@0 {
compatible = "lantiq,xrx200-pdi-port";
reg = <0>;
phy-mode = "rgmii";
phy-handle = <&phy0>;
};
ethernet@1 {
compatible = "lantiq,xrx200-pdi-port";
reg = <4>;
phy-mode = "mii";
phy-handle = <&phy13>;
};
ethernet@2 {
compatible = "lantiq,xrx200-pdi-port";
reg = <5>;
phy-mode = "mii";
phy-handle = <&phy14>;
};
ethernet@3 {
compatible = "lantiq,xrx200-pdi-port";
reg = <2>;
phy-mode = "mii";
phy-handle = <&phy11>;
};
ethernet@4 {
compatible = "lantiq,xrx200-pdi-port";
reg = <3>;
phy-mode = "mii";
phy-handle = <&phy12>;
};
};
mdio@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,xrx200-mdio";
phy0: ethernet-phy@0 {
reg = <0x0>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy11: ethernet-phy@11 {
reg = <0x11>;
compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
};
phy12: ethernet-phy@12 {
reg = <0x12>;
compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
};
phy13: ethernet-phy@13 {
reg = <0x13>;
compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
};
phy14: ethernet-phy@14 {
reg = <0x14>;
compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
};
};
};

View file

@ -1,155 +0,0 @@
/dts-v1/;
#include "danube.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "arcadyan,arv7525pw", "lantiq,xway", "lantiq,danube";
model = "Speedport W303V Typ A";
chosen {
bootargs = "console=ttyLTQ0,115200";
};
aliases {
led-boot = &power_green;
led-failsafe = &power_red;
led-running = &power_green;
led-dsl = &power_green;
led-internet = &online;
led-wifi = &wifi;
};
memory@0 {
reg = <0x0 0x2000000>;
};
sram@1F000000 {
vmmc@107000 {
status = "okay";
gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
};
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x10000>;
read-only;
};
partition@10000 {
label = "uboot_env";
reg = <0x10000 0x10000>;
read-only;
};
partition@20000 {
label = "firmware";
reg = <0x20000 0x3d0000>;
};
boardconfig: partition@400000 {
label = "board_config";
reg = <0x3f0000 0x10000>;
read-only;
};
};
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
exin {
lantiq,groups = "exin1";
lantiq,function = "exin";
};
pci {
lantiq,groups = "gnt1", "req1";
lantiq,function = "pci";
};
};
};
etop@E180000 {
phy-mode = "mii";
mtd-mac-address = <&boardconfig 0x16>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
wps {
label = "wps";
gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
reset {
label = "reset";
gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
power_green: power {
label = "arv7525pw:green:power";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
power_red: power1 {
label = "arv7525pw:red:power";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
online: online {
label = "arv7525pw:green:online";
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
};
voice {
label = "arv7525pw:green:telefonie";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
};
voice2 {
label = "arv7525pw:red:telefonie";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
};
wifi: wifi {
label = "arv7525pw:green:wlan";
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
};
};
};
&pci0 {
status = "okay";
interrupt-map = <0x7000 0 0 1 &icu0 135 1>;
wifi@0,0 {
compatible = "pci0,0";
reg = <0x7000 0 0 0 0>;
ralink,mtd-eeprom = <&boardconfig 0x410>;
};
};

View file

@ -1,238 +0,0 @@
/dts-v1/;
#include "danube.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "arcadyan,arv752dpw", "lantiq,xway", "lantiq,danube";
model = "Arcor 802";
chosen {
bootargs = "console=ttyLTQ0,115200";
};
aliases {
led-boot = &power_red;
led-failsafe = &power_blue;
led-running = &power_red;
led-dsl = &internet_red;
led-usb = &umts;
led-wifi = &wifi;
};
memory@0 {
reg = <0x0 0x4000000>;
};
sram@1F000000 {
vmmc@107000 {
status = "okay";
gpios = <&gpiomm 1 GPIO_ACTIVE_HIGH>;
};
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x800000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x10000>;
read-only;
};
partition@10000 {
label = "uboot_env";
reg = <0x10000 0x10000>;
read-only;
};
partition@20000 {
label = "firmware";
reg = <0x20000 0x7d0000>;
};
boardconfig: partition@7f0000 {
label = "board_config";
reg = <0x7f0000 0x10000>;
read-only;
};
};
};
gpiomm: gpiomm@4000000 {
compatible = "lantiq,gpio-mm";
reg = <1 0x0 0x10 >;
#address-cells = <1>;
#size-cells = <1>;
#gpio-cells = <2>;
gpio-controller;
lantiq,shadow = <0x3>;
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
ebu {
lantiq,groups = "ebu cs1";
lantiq,function = "ebu";
};
exin {
lantiq,groups = "exin1";
lantiq,function = "exin";
lantiq,pull = <2>;
lantiq,output = <0>;
};
pci_in {
lantiq,groups = "req2", "req1";
lantiq,function = "pci";
lantiq,open-drain = <1>;
lantiq,pull = <2>;
lantiq,output = <0>;
};
pci_out {
lantiq,groups = "gnt1";
lantiq,function = "pci";
lantiq,output = <1>;
};
pci_rst {
lantiq,pins = "io21";
lantiq,pull = <2>;
lantiq,output = <1>;
};
leds {
lantiq,pins = "io3", "io5", "io6", "io8";
lantiq,output = <1>;
lantiq,pull = <0>;
};
keys {
lantiq,pins = "io11", "io12", "io13", "io28";
lantiq,output = <0>;
lantiq,pull = <2>;
lantiq,open-drain = <1>;
};
};
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpiomm 0 GPIO_ACTIVE_HIGH>;
};
etop@E180000 {
phy-mode = "rmii";
mtd-mac-address = <&boardconfig 0x16>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
wps {
label = "wps";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
restart {
label = "restart";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
};
dsl {
label = "dsl";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
reset {
label = "reset";
gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
power_blue: power1 {
label = "arv752dpw:blue:power";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
internet_red: internet {
label = "arv752dpw:red:internet";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
message {
label = "arv752dpw:red:message";
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
};
power_red: power {
label = "arv752dpw:red:power";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
voice1 {
label = "arv752dpw:red:voice";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
};
umts: umts {
label = "arv752dpw:red:umts";
gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
};
wifi: wifi {
label = "arv752dpw:red:wifi";
gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
};
fxs1 {
label = "arv752dpw:green:tae-n";
gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
};
fxs2 {
label = "arv752dpw:green:tae-u";
gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
};
fxo {
label = "arv752dpw:green:isdn";
gpios = <&gpiomm 7 GPIO_ACTIVE_LOW>;
};
internet2 {
label = "arv752dpw:blue:internet";
gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>;
};
voice2 {
label = "arv752dpw:blue:voice";
gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
};
};
};
&pci0 {
status = "okay";
lantiq,external-clock;
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
interrupt-map = <0x7000 0 0 1 &icu0 135>;
req-mask = <0x3>;
wifi@1814,0601 {
compatible = "pci1814,0601";
reg = <0x7000 0 0 0 0>;
ralink,mtd-eeprom = <&boardconfig 0x410>;
ralink,mtd-eeprom-swap;
};
};

View file

@ -1,259 +0,0 @@
/dts-v1/;
#include "danube.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "arcadyan,arv752dpw22", "lantiq,xway", "lantiq,danube";
model = "Arcor 803";
chosen {
bootargs = "console=ttyLTQ0,115200";
};
aliases {
led-boot = &power_red;
led-failsafe = &power_blue;
led-running = &power_red;
led-dsl = &internet_red;
led-usb = &umts;
led-wifi = &wifi;
};
memory@0 {
reg = <0x0 0x4000000>;
};
sram@1F000000 {
vmmc@107000 {
status = "okay";
gpios = <&gpiomm 1 GPIO_ACTIVE_HIGH>;
};
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x800000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x30000>;
read-only;
};
partition@10000 {
label = "uboot_env";
reg = <0x30000 0x10000>;
read-only;
};
partition@20000 {
label = "firmware";
reg = <0x40000 0x7b0000>;
};
boardconfig: partition@7f0000 {
label = "board_config";
reg = <0x7f0000 0x10000>;
read-only;
};
};
};
gpiomm: gpiomm@4000000 {
compatible = "lantiq,gpio-mm";
reg = <1 0x0 0x10 >;
#address-cells = <1>;
#size-cells = <1>;
#gpio-cells = <2>;
gpio-controller;
lantiq,shadow = <3>;
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
ebu {
lantiq,groups = "ebu cs1";
lantiq,function = "ebu";
};
exin {
lantiq,groups = "exin1";
lantiq,function = "exin";
lantiq,pull = <2>;
lantiq,output = <0>;
};
pci_in {
lantiq,groups = "req1";
lantiq,function = "pci";
lantiq,pull = <2>;
lantiq,output = <0>;
};
pci_out {
lantiq,groups = "gnt1";
lantiq,function = "pci";
lantiq,open-drain = <1>;
lantiq,output = <1>;
};
pci_rst {
lantiq,pins = "io21";
lantiq,open-drain = <1>;
lantiq,output = <1>;
};
leds {
lantiq,pins = "io3", "io5", "io6", "io8";
lantiq,open-drain = <1>;
lantiq,output = <1>;
};
buttons {
lantiq,pins = "io11", "io12", "io13", "io28";
lantiq,pull = <2>;
lantiq,output = <0>;
};
};
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpiomm 0 GPIO_ACTIVE_HIGH>;
};
etop@E180000 {
phy-mode = "mii";
mtd-mac-address = <&boardconfig 0x16>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
wps {
label = "wps";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
restart {
label = "restart";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
};
dsl {
label = "dsl";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
reset {
label = "reset";
gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
power_blue: power1 {
label = "arv752dpw22:blue:power";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
internet_red: internet {
label = "arv752dpw22:red:internet";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
message {
label = "arv752dpw22:red:message";
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
};
power_red: power {
label = "arv752dpw22:red:power";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
voice1 {
label = "arv752dpw22:red:voice";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
};
umts: umts {
label = "arv752dpw22:red:umts";
gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
};
wifi: wifi {
label = "arv752dpw22:red:wifi";
gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
};
fxs1 {
label = "arv752dpw22:green:tae-n";
gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
};
fxs2 {
label = "arv752dpw22:green:tae-u";
gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
};
fxo {
label = "arv752dpw22:green:isdn";
gpios = <&gpiomm 7 GPIO_ACTIVE_LOW>;
};
internet2 {
label = "arv752dpw22:blue:internet";
gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>;
};
voice2 {
label = "arv752dpw22:blue:voice";
gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
};
eth1 {
label = "arv752dpw22:green:lan1";
gpios = <&gpiomm 11 GPIO_ACTIVE_LOW>;
};
eth2 {
label = "arv752dpw22:green:lan2";
gpios = <&gpiomm 12 GPIO_ACTIVE_LOW>;
};
eth3 {
label = "arv752dpw22:green:lan3";
gpios = <&gpiomm 13 GPIO_ACTIVE_LOW>;
};
eth4 {
label = "arv752dpw22:green:lan4";
gpios = <&gpiomm 14 GPIO_ACTIVE_LOW>;
};
};
};
&pci0 {
status = "okay";
lantiq,external-clock;
interrupt-map = <
0x7000 0 0 1 &icu0 30
0x7800 0 0 1 &icu0 135
0x7800 0 0 2 &icu0 135
0x7800 0 0 3 &icu0 135
>;
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
req-mask = <0x3>;
wifi@1814,3592 {
compatible = "pci1814,3592";
reg = <0x7000 0 0 0 0>;
ralink,mtd-eeprom = <&boardconfig 0x410>;
ralink,mtd-eeprom-swap;
mtd-mac-address = <&boardconfig 0x16>;
};
};

View file

@ -1,180 +0,0 @@
/dts-v1/;
#include "danube.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "arcadyan,arv8539pw22", "lantiq,xway", "lantiq,danube";
model = "Speedport W 504V Typ A";
chosen {
bootargs = "console=ttyLTQ0,115200";
};
aliases {
led-boot = &power_green;
led-failsafe = &power_red;
led-running = &power_green;
led-dsl = &dsl_green;
led-internet = &online_green;
led-wifi = &wireless_green;
};
memory@0 {
reg = <0x0 0x4000000>;
};
sram@1F000000 {
vmmc@107000 {
status = "okay";
gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
};
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x800000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x30000>; /* 192 KiB */
read-only;
};
partition@30000 {
label = "uboot";
reg = <0x30000 0x10000>; /* 64 KiB */
read-only;
};
partition@40000 {
label = "firmware";
reg = <0x40000 0x7B0000>; /* 7872 KiB */
};
art: partition@7F0000 {
label = "art";
reg = <0x7F0000 0x10000>; /* 64 KiB*/
read-only;
};
};
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
pci_in {
lantiq,groups = "req1";
lantiq,function = "pci";
lantiq,open-drain = <1>;
lantiq,pull = <2>;
lantiq,output = <0>;
};
pci_out {
lantiq,groups = "gnt1";
lantiq,function = "pci";
lantiq,output = <1>;
};
pci_rst {
lantiq,pins = "io21";
lantiq,pull = <2>;
lantiq,output = <1>;
};
relay {
lantiq,pins = "io31";
lantiq,output = <1>;
};
};
};
etop@E180000 {
phy-mode = "mii";
mtd-mac-address = <&art 0x16>;
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
lantiq,portmask = <0x3>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
wlan {
label = "wlan";
gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
reset {
label = "reset";
gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
/* key DECT is missing */
};
gpio-leds {
compatible = "gpio-leds";
power_green: power-green {
label = "arv8539pw22:green:power";
gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
power_red: power-red {
label = "arv8539pw22:red:power";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
dsl_green: dsl-green {
label = "arv8539pw22:green:dsl";
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
};
online_green: online-green {
label = "arv8539pw22:green:online";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
};
wireless_green: wireless-green {
label = "arv8539pw22:green:wlan";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
};
/*
telefonie green is missing
*/
};
};
&pci0 {
status = "okay";
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
wifi@168c,0029 {
compatible = "pci168c,0029";
reg = <0x7000 0 0 0 0>;
qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
mtd-mac-address = <&art 0x16>;
mtd-mac-address-increment = <1>;
};
};

View file

@ -1,171 +0,0 @@
/dts-v1/;
#include "vr9.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "alphanetworks,asl56026", "lantiq,xway", "lantiq,vr9";
model = "BT OpenReach VDSL Modem";
chosen {
bootargs = "console=ttyLTQ0,115200";
};
aliases {
led-boot = &power_green;
led-failsafe = &power_red;
led-running = &power_green;
led-dsl = &dsl;
};
memory@0 {
reg = <0x0 0x2000000>;
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x0800000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x0 0x30000>;
};
partition@30000 {
label = "uboot_env";
reg = <0x30000 0x10000>;
};
partition@40000 {
label = "firmware";
reg = <0x40000 0x750000>;
};
partition@790000 {
label = "ddrconfig";
reg = <0x790000 0x70000>;
read-only;
};
};
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
mdio {
lantiq,groups = "mdio";
lantiq,function = "mdio";
};
};
};
};
gphy-xrx200 {
compatible = "lantiq,phy-xrx200";
firmware1 = "lantiq/xrx200_phy22f_a14.bin"; /*VR9 1.1*/
firmware2 = "lantiq/xrx200_phy22f_a22.bin"; /*VR9 1.2*/
phys = [ 00 01 ];
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
dsl: dsl {
label = "asl56026:green:dsl";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
};
/* power-* is a bicolour led */
power_green: power_green {
label = "asl56026:green:power";
gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
power_red: power_red {
label = "asl56026:red:power";
gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
};
};
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
power_led_blink {
gpio-export,name = "power_led_blink";
gpio-export,output = <0>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
};
};
&eth0 {
lan: interface@0 {
compatible = "lantiq,xrx200-pdi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
lantiq,switch;
ethernet@2 {
compatible = "lantiq,xrx200-pdi-port";
reg = <2>;
phy-mode = "mii";
phy-handle = <&phy11>;
};
ethernet@3 {
compatible = "lantiq,xrx200-pdi-port";
reg = <3>;
phy-mode = "mii";
phy-handle = <&phy14>;
};
};
mdio@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,xrx200-mdio";
phy11: ethernet-phy@11 {
reg = <0x11>;
compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
};
phy14: ethernet-phy@14 {
reg = <0x14>;
compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
};
};
};

View file

@ -1,262 +0,0 @@
/dts-v1/;
#include "danube.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "bt,homehub-v2b", "lantiq,xway", "lantiq,danube";
model = "BT Home Hub 2B"; /* SoC: Lantiq Danube-S PSB 50712 @ 333MHz V1.3/1.5 */
chosen {
bootargs = "console=ttyLTQ0,115200";
};
aliases {
led-boot = &power_orange;
led-failsafe = &power_red;
led-running = &power_blue;
led-dsl = &broadband_blue;
led-wifi = &wireless_blue;
};
memory@0 { /* RAM: Samsung K4H511638F-LC 64MB */
reg = <0x0 0x4000000>;
};
sram@1F000000 {
vmmc@107000 {
status = "okay";
gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
};
};
fpi@10000000 {
localbus@0 {
nor-boot@0 { /* NOR Flash: Spansion S29AL004D 512KB */
compatible = "lantiq,nor"; /* "AMD AM29LV400BB" compatible on 3.3.8 */
lantiq,cs = <0>;
bank-width = <2>;
reg = <0 0x0 0x80000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x40000>; /* 256KB */
};
partition@40000 {
label = "uboot_env";
reg = <0x40000 0x10000>; /* 64KB */
};
partition@50000 {
label = "rg_conf_1";
reg = <0x50000 0x10000>;
};
partition@60000 {
label = "rg_conf_2";
reg = <0x60000 0x10000>;
};
partition@70000 {
label = "rg_conf_factory";
reg = <0x70000 0x10000>;
};
};
};
nand-parts@0 { /* NAND Flash: Samsung K9F5608U0D-JIB0 32MB */
compatible = "lantiq,nand-xway";
lantiq,cs = <1>;
bank-width = <2>;
reg = <1 0x0 0x2000000 >;
#address-cells = <1>;
#size-cells = <1>;
req-mask = <0x1>; /* PCI request lines to mask during NAND access */
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
ath9k_cal: partition@0 {
label = "art"; /* Atheros 9160 wifi b/g/n radio EEPROM */
reg = <0x00000 0x4000>;
read-only;
};
partition@4000 {
label = "kernel";
reg = <0x4000 0x200000>;
};
partition@164000 {
label = "ubi";
reg = <0x204000 0x1DFC000>;
};
};
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
nand_out {
lantiq,groups = "nand cle", "nand ale";
lantiq,function = "ebu";
lantiq,output = <1>;
lantiq,open-drain = <0>;
lantiq,pull = <0>;
};
nand_cs1 {
lantiq,groups = "nand cs1";
lantiq,function = "ebu";
lantiq,open-drain = <0>;
lantiq,pull = <0>;
};
exin {
lantiq,groups = "exin1";
lantiq,function = "exin";
};
pci_in {
lantiq,groups = "req1";
lantiq,function = "pci";
lantiq,output = <0>;
lantiq,open-drain = <1>;
lantiq,pull = <2>;
};
pci_out {
lantiq,groups = "gnt1";
lantiq,function = "pci";
lantiq,output = <1>;
lantiq,open-drain = <0>;
lantiq,pull = <0>;
};
pci_rst {
lantiq,pins = "io21";
lantiq,output = <1>;
lantiq,open-drain = <0>;
};
btn_in {
lantiq,pins = "io2", "io15", "io22";
lantiq,output = <0>;
lantiq,open-drain = <1>;
lantiq,pull = <2>;
};
};
};
etop@E180000 {
phy-mode = "rmii";
};
ifxhcd@E101000 {
status = "okay";
};
gpios: stp@E100BB0 {
status = "okay";
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
findhandset {
label = "findhandset";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PHONE>;
};
wps {
label = "wps";
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
gpio-leds {
compatible = "gpio-leds";
upgrading-orange {
label = "bthomehubv2b:orange:upgrading";
gpios = <&gpios 5 GPIO_ACTIVE_HIGH>;
};
phone-orange {
label = "bthomehubv2b:orange:phone";
gpios = <&gpios 6 GPIO_ACTIVE_HIGH>;
};
phone-blue {
label = "bthomehubv2b:blue:phone";
gpios = <&gpios 7 GPIO_ACTIVE_HIGH>;
};
wireless-orange {
label = "bthomehubv2b:orange:wireless";
gpios = <&gpios 8 GPIO_ACTIVE_HIGH>;
};
wireless_blue: wireless-blue {
label = "bthomehubv2b:blue:wireless";
gpios = <&gpios 9 GPIO_ACTIVE_HIGH>;
};
broadband-red {
label = "bthomehubv2b:red:broadband";
gpios = <&gpios 10 GPIO_ACTIVE_HIGH>;
};
broadband-orange {
label = "bthomehubv2b:orange:broadband";
gpios = <&gpios 11 GPIO_ACTIVE_HIGH>;
};
broadband_blue: broadband-blue {
label = "bthomehubv2b:blue:broadband";
gpios = <&gpios 12 GPIO_ACTIVE_HIGH>;
};
power_red: power-red {
label = "bthomehubv2b:red:power";
gpios = <&gpios 13 GPIO_ACTIVE_HIGH>;
};
power_orange: power-orange {
label = "bthomehubv2b:orange:power";
gpios = <&gpios 14 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
power_blue: power-blue {
label = "bthomehubv2b:blue:power";
gpios = <&gpios 15 GPIO_ACTIVE_HIGH>;
};
};
};
&pci0 {
status = "okay";
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
wifi@168c,0027 {
compatible = "pci168c,0027";
reg = <0x7000 0 0 0 0>;
qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
};
};

View file

@ -1,208 +0,0 @@
/dts-v1/;
#include "ar9.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "bt,homehub-v3a", "lantiq,xway", "lantiq,ar9";
model = "BT Home Hub 3A"; /* SoC: Lantiq ar9 @ 333MHz */
chosen {
bootargs = "console=ttyLTQ0,115200";
};
aliases {
led-boot = &power_orange;
led-failsafe = &power_red;
led-running = &power_blue;
led-dsl = &broadband_blue;
led-wifi = &wireless_blue;
};
memory@0 { /* RAM: Samsung K4H511638F-LC 64MB */
reg = <0x0 0x4000000>;
};
sram@1F000000 {
vmmc@107000 {
status = "okay";
gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
};
};
fpi@10000000 {
localbus@0 {
nand-parts@0 { /* NAND Flash: Samsung K9F5608U0D-JIB0 32MB */
compatible = "lantiq,nand-xway";
lantiq,cs = <1>;
bank-width = <2>;
reg = <1 0x0 0x2000000 >;
#address-cells = <1>;
#size-cells = <1>;
req-mask = <0x1>; /* PCI request lines to mask during NAND access */
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "preboot";
reg = <0x00000 0x8000>;
read-only;
};
partition@8000 {
label = "u-boot";
reg = <0x8000 0x05c000>;
read-only;
};
partition@64000 {
label = "uboot_env";
reg = <0x64000 0x004000>;
};
ath9k_cal: partition@68000 {
label = "art-copy";
reg = <0x68000 0x004000>;
};
partition@6c000 {
label = "kernel";
reg = <0x6c000 0x200000>;
};
partition@26c000 {
label = "ubi";
reg = <0x26c000 0x1d94000>;
};
};
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
nand_out {
lantiq,groups = "nand cle", "nand ale";
lantiq,function = "ebu";
lantiq,output = <1>;
lantiq,open-drain = <0>;
lantiq,pull = <0>;
};
nand_cs1 {
lantiq,groups = "nand cs1";
lantiq,function = "ebu";
lantiq,open-drain = <0>;
lantiq,pull = <0>;
};
pci_in {
lantiq,groups = "req1";
lantiq,function = "pci";
lantiq,output = <0>;
lantiq,open-drain = <1>;
lantiq,pull = <2>;
};
pci_out {
lantiq,groups = "gnt1";
lantiq,function = "pci";
lantiq,output = <1>;
lantiq,open-drain = <0>;
lantiq,pull = <0>;
};
pci_rst {
lantiq,pins = "io21";
lantiq,output = <1>;
lantiq,open-drain = <0>;
};
};
};
etop@E180000 {
phy-mode = "rgmii";
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio 54 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
restart {
label = "restart";
gpios = <&gpio 52 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
};
wps {
label = "wps";
gpios = <&gpio 53 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
gpio-leds {
compatible = "gpio-leds";
wireless-red {
label = "bthomehubv3a:red:wireless";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
wireless-orange {
label = "bthomehubv3a:orange:wireless";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
};
wireless_blue: wireless-blue {
label = "bthomehubv3a:blue:wireless";
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
};
broadband-red {
label = "bthomehubv3a:red:broadband";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
broadband-orange {
label = "bthomehubv3a:orange:broadband";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
broadband_blue: broadband-blue {
label = "bthomehubv3a:blue:broadband";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
power_red: power-red {
label = "bthomehubv3a:red:power";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
power_orange: power-orange {
label = "bthomehubv3a:orange:power";
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
power_blue: power-blue {
label = "bthomehubv3a:blue:power";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
};
};
&pci0 {
status = "okay";
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
ath9k@7000 {
reg = <0x7000 0 0 0 0>;
qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
};
};

View file

@ -1,282 +0,0 @@
/dts-v1/;
#include "vr9.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "bt,homehub-v5a", "lantiq,xway", "lantiq,vr9";
model = "BT Home Hub 5A";
chosen {
bootargs = "console=ttyLTQ0,115200";
};
aliases {
led-boot = &power_green;
led-failsafe = &power_red;
led-running = &power_blue;
led-dsl = &broadband_blue;
led-wifi = &wireless_blue;
};
memory@0 {
reg = <0x0 0x8000000>;
};
fpi@10000000 {
localbus@0 {
nand-parts@0 {
compatible = "lantiq,nand-xway";
lantiq,cs = <1>;
bank-width = <2>;
reg = <0x1 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
nand-on-flash-bbt;
nand-ecc-strength = <3>;
nand-ecc-step-size = <256>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0xa0000>;
read-only;
};
partition@a0000 {
label = "uboot-env";
reg = <0xa0000 0x20000>;
read-only;
};
partition@c0000 {
label = "unused";
reg = <0xc0000 0x40000>;
};
partition@100000 {
label = "ubi";
reg = <0x100000 0x7e80000>;
};
/*
* last 512 KiB are for the bad block table, not writable
*/
};
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
mdio {
lantiq,groups = "mdio";
lantiq,function = "mdio";
};
pci_rst {
lantiq,pins = "io21";
lantiq,output = <1>;
lantiq,open-drain;
};
pcie_rst {
lantiq,pins = "io38";
lantiq,pull = <0>;
lantiq,output = <1>;
lantiq,open-drain;
};
usb_vbus {
lantiq,pins = "io33";
lantiq,pull = <0>;
lantiq,open-drain = <0>;
lantiq,output = <1>;
};
nand_out {
lantiq,groups = "nand cle", "nand ale";
lantiq,function = "ebu";
lantiq,output = <1>;
lantiq,open-drain = <0>;
lantiq,pull = <0>;
};
nand_cs1 {
lantiq,groups = "nand cs1";
lantiq,function = "ebu";
lantiq,open-drain = <0>;
lantiq,pull = <0>;
};
};
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
};
};
gphy-xrx200 {
compatible = "lantiq,phy-xrx200";
firmware1 = "lantiq/xrx200_phy11g_a14.bin"; /*VR9 1.1*/
firmware2 = "lantiq/xrx200_phy11g_a22.bin"; /*VR9 1.2*/
phys = [ 00 01 ];
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
restart {
label = "restart";
gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
};
};
gpio-leds {
compatible = "gpio-leds";
/* broadband-* is a single RGB led */
broadband-red {
label = "bthomehubv5a:red:broadband";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
broadband-green {
label = "bthomehubv5a:green:broadband";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
broadband_blue: broadband-blue {
label = "bthomehubv5a:blue:broadband";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
};
/* wireless-* is a single RGB led */
wireless-red {
label = "bthomehubv5a:red:wireless";
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
};
wireless-green {
label = "bthomehubv5a:green:wireless";
gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
};
wireless_blue: wireless-blue {
label = "bthomehubv5a:blue:wireless";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
/* power-* is a single RGB led */
power_red: power-red {
label = "bthomehubv5a:red:power";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
power_green: power-green {
label = "bthomehubv5a:green:power";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
power_blue: power-blue {
label = "bthomehubv5a:blue:power";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
dimmed {
label = "dimmed";
gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
};
};
};
&pci0 {
status = "okay";
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
wifi@168c,002d {
compatible = "pci168c,002d";
reg = <0x7000 0 0 0 0>;
qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
qca,disable-5ghz;
};
};
&eth0 {
lan: interface@0 {
compatible = "lantiq,xrx200-pdi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
lantiq,switch;
ethernet@0 {
compatible = "lantiq,xrx200-pdi-port";
reg = <0>;
phy-mode = "rgmii";
phy-handle = <&phy0>;
};
ethernet@1 {
compatible = "lantiq,xrx200-pdi-port";
reg = <1>;
phy-mode = "rgmii";
phy-handle = <&phy1>;
};
ethernet@2 {
compatible = "lantiq,xrx200-pdi-port";
reg = <2>;
phy-mode = "gmii";
phy-handle = <&phy11>;
};
ethernet@4 {
compatible = "lantiq,xrx200-pdi-port";
reg = <4>;
phy-mode = "gmii";
phy-handle = <&phy13>;
};
ethernet@5 {
compatible = "lantiq,xrx200-pdi-port";
reg = <5>;
phy-mode = "rgmii";
phy-handle = <&phy5>;
};
};
mdio@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,xrx200-mdio";
phy0: ethernet-phy@0 {
reg = <0x0>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy1: ethernet-phy@1 {
reg = <0x1>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy5: ethernet-phy@5 {
reg = <0x5>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy11: ethernet-phy@11 {
reg = <0x11>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy13: ethernet-phy@13 {
reg = <0x13>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
};
};

View file

@ -1,171 +0,0 @@
/dts-v1/;
#include "amazonse.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "netgear,dgn1000b", "lantiq,xway", "lantiq,ase";
model = "Netgear DGN1000B";
chosen {
bootargs = "console=ttyLTQ0,115200";
};
aliases {
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-dsl = &dsl;
led-internet = &online_green;
};
memory@0 {
reg = <0x0 0x1000000>;
};
fpi@10000000 {
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
asc {
lantiq,groups = "asc";
lantiq,function = "asc";
};
keys_in {
lantiq,pins = "io0",/* "io25", */"io29";
lantiq,pull = <2>;
lantiq,open-drain = <1>;
};
};
pins_spi_default: pins_spi_default {
spi_in {
lantiq,groups = "spi_di";
lantiq,function = "spi";
};
spi_out {
lantiq,groups = "spi_do", "spi_clk",
"spi_cs1";
lantiq,function = "spi";
lantiq,output = <1>;
};
};
};
etop@E180000 {
phy-mode = "mii";
mac-address = [ 00 11 22 33 44 55 ];
};
spi@E100800 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pins_spi_default>;
m25p80@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <1 0>;
spi-max-frequency = <5000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
reg = <0x0 0x20000>;
label = "SPI (RO) U-Boot Image";
read-only;
};
partition@20000 {
reg = <0x20000 0x10000>;
label = "ENV_MAC";
read-only;
};
partition@30000 {
reg = <0x30000 0x10000>;
label = "DPF";
read-only;
};
partition@40000 {
reg = <0x40000 0x10000>;
label = "NVRAM";
read-only;
};
partition@500000 {
reg = <0x50000 0x003a0000>;
label = "kernel";
};
};
};
};
ifxhcd@E101000 {
status = "okay";
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
rfkill {
label = "rfkill";
gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
wps {
label = "wps";
gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
gpio-leds {
compatible = "gpio-leds";
dsl: dsl {
label = "dgn1000b:green:dsl";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
default-state = "on";
};
online_green: online {
label = "dgn1000b:green:online";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
default-state = "on";
};
online2 {
label = "dgn1000b:red:online";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wps {
label = "dgn1000b:green:wps";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
default-state = "on";
};
power: power {
label = "dgn1000b:green:power";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
/*
power red is missing
*/
};
};

View file

@ -1,8 +0,0 @@
/dts-v1/;
#include "DGN3500.dtsi"
/ {
compatible = "netgear,dgn3500", "lantiq,xway", "lantiq,ar9";
model = "Netgear DGN3500";
};

View file

@ -1,213 +0,0 @@
#include "ar9.dtsi"
#include <dt-bindings/input/input.h>
/ {
chosen {
bootargs = "root= console=ttyLTQ0,115200";
};
aliases {
led-boot = &power_green;
led-failsafe = &power_red;
led-running = &power_green;
led-dsl = &dsl;
led-internet = &internet;
led-usb = &usb;
led-wifi = &wifi_green;
};
memory@0 {
reg = <0x0 0x4000000>;
};
fpi@10000000 {
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
exin {
lantiq,groups = "exin1";
lantiq,function = "exin";
};
pci {
lantiq,groups = "gnt1", "req1";
lantiq,function = "pci";
};
pci-in {
lantiq,groups = "req1";
lantiq,output = <0>;
lantiq,open-drain = <1>;
lantiq,pull = <2>;
};
pci-out {
lantiq,groups = "gnt1";
lantiq,output = <1>;
lantiq,pull = <0>;
};
};
pins_spi_default: pins_spi_default {
spi_in {
lantiq,groups = "spi_di";
lantiq,function = "spi";
};
spi_out {
lantiq,groups = "spi_do", "spi_clk",
"spi_cs4";
lantiq,function = "spi";
lantiq,output = <1>;
};
};
};
etop@E180000 {
phy-mode = "mii";
};
ifxhcd@E101000 {
status = "okay";
};
};
rtl8366rb {
compatible = "realtek,rtl8366rb";
gpio-sda = <&gpio 35 GPIO_ACTIVE_HIGH>;
gpio-sck = <&gpio 37 GPIO_ACTIVE_HIGH>;
realtek,initvals = <
0x0000 0x0830
0x0400 0x8130
0x000A 0x83ED
0x0F51 0x0017
0x02F5 0x0048
0x02FA 0xFFDF
0x02FB 0xFFE0
0x0450 0x0000
0x0401 0x0000
0x0431 0x0960
>;
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
rfkill {
label = "rfkill";
gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
wps {
label = "wps";
gpios = <&gpio 54 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
reset {
label = "reset";
gpios = <&gpio 53 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
internet: internet {
label = "dgn3500:green:internet";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
internet2 {
label = "dgn3500:red:internet";
gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
};
dsl: dsl {
label = "dgn3500:green:dsl";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
usb: usb {
label = "dgn3500:green:usb";
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
};
power_green: power {
label = "dgn3500:green:power";
gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
power_red: power2 {
label = "dgn3500:red:power";
gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
};
wifi_green: wifi {
label = "dgn3500:green:wireless";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
wifi2 {
label = "dgn3500:amber:wireless";
gpios = <&gpio 51 GPIO_ACTIVE_LOW>;
};
wps {
label = "dgn3500:green:wps";
gpios = <&gpio 52 GPIO_ACTIVE_LOW>;
};
};
};
&pci0 {
status = "okay";
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
wifi@168c,0029 {
compatible = "pci168c,0029";
reg = <0x7000 0 0 0 0>;
qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
};
};
&spi {
pinctrl-names = "default";
pinctrl-0 = <&pins_spi_default>;
status = "ok";
m25p80@4 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <4 0>;
spi-max-frequency = <20000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
reg = <0x0 0x10000>;
label = "uboot";
read-only;
};
partition@10000 {
reg = <0x10000 0x10000>;
label = "uboot-env";
read-only;
};
ath9k_cal: partition@20000 {
reg = <0x20000 0x10000>;
label = "calibration";
read-only;
};
partition@50000 {
reg = <0x50000 0xfa0000>;
label = "firmware";
};
};
};
};

View file

@ -1,8 +0,0 @@
/dts-v1/;
#include "DGN3500.dtsi"
/ {
compatible = "netgear,dgn3500b", "lantiq,xway", "lantiq,ar9";
model = "Netgear DGN3500B";
};

View file

@ -1,215 +0,0 @@
/dts-v1/;
#include "vr9.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "netgear,dm200", "lantiq,xway", "lantiq,vr9";
model = "Netgear DM200";
chosen {
bootargs = "console=ttyLTQ0,115200";
};
aliases {
led-boot = &power_green;
led-failsafe = &power_amber;
led-running = &power_green;
led-dsl = &dsl_green;
};
memory@0 {
reg = <0x0 0x4000000>;
};
fpi@10000000 {
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
mdio {
lantiq,groups = "mdio";
lantiq,function = "mdio";
};
};
pins_spi_default: pins_spi_default {
spi_in {
lantiq,groups = "spi_di";
lantiq,function = "spi";
};
spi_out {
lantiq,groups = "spi_do", "spi_clk", "spi_cs4";
lantiq,function = "spi";
lantiq,output = <1>;
};
};
};
pcie@d900000 {
status = "disabled";
};
};
gphy-xrx200 {
compatible = "lantiq,phy-xrx200";
firmware = "lantiq/xrx200_phy22f_a22.bin";
phys = [ 01 ];
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
annexa {
gpio-export,name = "annexa";
gpio-export,output = <0>;
gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
};
annexb {
gpio-export,name = "annexb";
gpio-export,output = <0>;
gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
};
};
gpio-leds {
compatible = "gpio-leds";
power_amber: power_amber {
label = "dm200:amber:power";
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
};
power_green: power_green {
label = "dm200:green:power";
gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
};
lan_amber {
label = "dm200:amber:lan";
gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
};
lan_green {
label = "dm200:green:lan";
gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
};
dsl_amber {
label = "dm200:amber:dsl";
gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
};
dsl_green: dsl_green {
label = "dm200:green:dsl";
gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
};
};
};
&spi {
pinctrl-names = "default";
pinctrl-0 = <&pins_spi_default>;
status = "ok";
m25p80@4 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <4 0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
reg = <0x0 0x20000>;
label = "uboot";
read-only;
};
partition@20000 {
reg = <0x20000 0x10000>;
label = "gphyfirmware";
read-only;
};
partition@30000 {
reg = <0x30000 0x7b0000>;
label = "firmware";
};
partition@7e0000 {
reg = <0x7e0000 0x10000>;
label = "sysconfig";
read-only;
};
partition@7f0000 {
reg = <0x7f0000 0x2000>;
label = "ubootconfig";
read-only;
};
partition@7f2000 {
reg = <0x7f2000 0x1000>;
label = "ART";
read-only;
};
partition@7f3000 {
reg = <0x7f3000 0x1000>;
label = "pot";
read-only;
};
partition@7f4000 {
reg = <0x7f4000 0xc000>;
label = "ret";
read-only;
};
};
};
};
&eth0 {
lan: interface@0 {
compatible = "lantiq,xrx200-pdi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
ethernet@4 {
compatible = "lantiq,xrx200-pdi-port";
reg = <4>;
phy-mode = "mii";
phy-handle = <&phy13>;
};
};
mdio@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,xrx200-mdio";
phy13: ethernet-phy@13 {
reg = <0x13>;
compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
};
};
};

View file

@ -1,83 +0,0 @@
/dts-v1/;
#include "danube.dtsi"
/ {
compatible = "lantiq,easy50712", "lantiq,xway", "lantiq,danube";
model = "Intel EASY50712 Nand";
chosen {
bootargs = "console=ttyLTQ0,115200";
};
memory@0 {
reg = <0x0 0x2000000>;
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x10000>; /* 64 KB */
};
partition@10000 {
label = "uboot_env";
reg = <0x10000 0x10000>; /* 64 KB */
};
partition@20000 {
label = "firmware";
reg = <0x20000 0x3d0000>;
};
partition@400000 {
label = "rootfs";
reg = <0x400000 0x400000>;
};
};
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
stp {
lantiq,groups = "stp";
lantiq,function = "stp";
};
exin {
lantiq,groups = "exin1";
lantiq,function = "exin";
};
pci {
lantiq,groups = "gnt1";
lantiq,function = "pci";
};
conf_out {
lantiq,pins = "io4", "io5", "io6"; /* stp */
lantiq,open-drain;
lantiq,pull = <0>;
};
};
};
etop@E180000 {
phy-mode = "rmii";
};
};
};

View file

@ -1,93 +0,0 @@
/dts-v1/;
#include "ar9.dtsi"
/ {
compatible = "lantiq,easy50810", "lantiq,xway", "lantiq,ar9";
model = "Lantiq EASY50810";
chosen {
bootargs = "console=ttyLTQ0,115200";
};
memory@0 {
reg = <0x0 0x2000000>;
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x10000>; /* 64 KB */
};
partition@10000 {
label = "uboot_env";
reg = <0x10000 0x10000>; /* 64 KB */
};
partition@20000 {
label = "firmware";
reg = <0x20000 0x3d0000>;
};
partition@400000 {
label = "rootfs";
reg = <0x400000 0x400000>;
};
};
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
stp {
lantiq,groups = "stp";
lantiq,function = "stp";
};
exin {
lantiq,groups = "exin1";
lantiq,function = "exin";
};
pci {
lantiq,groups = "gnt1";
lantiq,function = "pci";
};
conf_out {
lantiq,pins = "io4", "io5", "io6"; /* stp */
lantiq,open-drain;
lantiq,pull = <0>;
};
};
};
etop@E180000 {
phy-mode = "rmii";
};
stp0: stp@E100BB0 {
#gpio-cells = <2>;
compatible = "lantiq,gpio-stp-xway";
gpio-controller;
reg = <0xE100BB0 0x40>;
lantiq,shadow = <0xfff>;
lantiq,groups = <0x3>;
};
};
};

View file

@ -1,298 +0,0 @@
#include "vr9.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "lantiq,easy80920", "lantiq,xway", "lantiq,vr9";
chosen {
bootargs = "console=ttyLTQ0,115200";
};
aliases {
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-usb = &usb1;
led-usb2 = &usb2;
};
memory@0 {
reg = <0x0 0x4000000>;
};
fpi@10000000 {
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
exin3 {
lantiq,groups = "exin3";
lantiq,function = "exin";
};
stp {
lantiq,groups = "stp";
lantiq,function = "stp";
};
nand {
lantiq,groups = "nand cle", "nand ale",
"nand rd", "nand rdy";
lantiq,function = "ebu";
};
mdio {
lantiq,groups = "mdio";
lantiq,function = "mdio";
};
pci {
lantiq,groups = "gnt1", "req1";
lantiq,function = "pci";
};
conf_out {
lantiq,pins = "io24", "io13", "io49", /* nand cle, ale and rd */
"io4", "io5", "io6", /* stp */
"io21",
"io33";
lantiq,open-drain;
lantiq,pull = <0>;
lantiq,output = <1>;
};
pcie-rst {
lantiq,pins = "io38";
lantiq,pull = <0>;
lantiq,output = <1>;
};
conf_in {
lantiq,pins = "io39", /* exin3 */
"io48"; /* nand rdy */
lantiq,pull = <2>;
};
};
pins_spi_default: pins_spi_default {
spi_in {
lantiq,groups = "spi_di";
lantiq,function = "spi";
};
spi_out {
lantiq,groups = "spi_do", "spi_clk",
"spi_cs4";
lantiq,function = "spi";
lantiq,output = <1>;
};
};
};
stp: stp@E100BB0 {
compatible = "lantiq,gpio-stp-xway";
reg = <0xE100BB0 0x40>;
#gpio-cells = <2>;
gpio-controller;
lantiq,shadow = <0xffff>;
lantiq,groups = <0x7>;
lantiq,dsl = <0x3>;
lantiq,phy1 = <0x7>;
lantiq,phy2 = <0x7>;
/* lantiq,rising; */
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
lantiq,portmask = <0x3>;
};
};
gphy-xrx200 {
compatible = "lantiq,phy-xrx200";
firmware1 = "lantiq/xrx200_phy11g_a14.bin";
firmware2 = "lantiq/xrx200_phy11g_a22.bin";
phys = [ 00 01 ];
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
/* reset {
label = "reset";
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};*/
paging {
label = "paging";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PHONE>;
};
};
gpio-leds {
compatible = "gpio-leds";
power: power {
label = "easy80920:green:power";
gpios = <&stp 9 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
warning {
label = "easy80920:green:warning";
gpios = <&stp 22 GPIO_ACTIVE_HIGH>;
};
fxs1 {
label = "easy80920:green:fxs1";
gpios = <&stp 21 GPIO_ACTIVE_HIGH>;
};
fxs2 {
label = "easy80920:green:fxs2";
gpios = <&stp 20 GPIO_ACTIVE_HIGH>;
};
fxo {
label = "easy80920:green:fxo";
gpios = <&stp 19 GPIO_ACTIVE_HIGH>;
};
usb1: usb1 {
label = "easy80920:green:usb1";
gpios = <&stp 18 GPIO_ACTIVE_HIGH>;
};
usb2: usb2 {
label = "easy80920:green:usb2";
gpios = <&stp 15 GPIO_ACTIVE_HIGH>;
};
sd {
label = "easy80920:green:sd";
gpios = <&stp 14 GPIO_ACTIVE_HIGH>;
};
wps {
label = "easy80920:green:wps";
gpios = <&stp 12 GPIO_ACTIVE_HIGH>;
};
};
};
&spi {
pinctrl-names = "default";
pinctrl-0 = <&pins_spi_default>;
status = "ok";
m25p80@4 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <4 0>;
spi-max-frequency = <1000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
reg = <0x0 0x20000>;
label = "SPI (RO) U-Boot Image";
read-only;
};
partition@20000 {
reg = <0x20000 0x10000>;
label = "ENV_MAC";
read-only;
};
partition@30000 {
reg = <0x30000 0x10000>;
label = "DPF";
read-only;
};
partition@40000 {
reg = <0x40000 0x10000>;
label = "NVRAM";
read-only;
};
partition@500000 {
reg = <0x50000 0x003a0000>;
label = "kernel";
};
};
};
};
&eth0 {
lan: interface@0 {
compatible = "lantiq,xrx200-pdi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
lantiq,switch;
ethernet@4 {
compatible = "lantiq,xrx200-pdi-port";
reg = <4>;
phy-mode = "gmii";
phy-handle = <&phy13>;
};
ethernet@2 {
compatible = "lantiq,xrx200-pdi-port";
reg = <2>;
phy-mode = "gmii";
phy-handle = <&phy11>;
};
ethernet@1 {
compatible = "lantiq,xrx200-pdi-port";
reg = <1>;
phy-mode = "rgmii";
phy-handle = <&phy1>;
};
ethernet@0 {
compatible = "lantiq,xrx200-pdi-port";
reg = <0>;
phy-mode = "rgmii";
phy-handle = <&phy0>;
};
};
wan: interface@1 {
compatible = "lantiq,xrx200-pdi";
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
lantiq,wan;
ethernet@5 {
compatible = "lantiq,xrx200-pdi-port";
reg = <5>;
phy-mode = "rgmii";
phy-handle = <&phy5>;
};
};
mdio@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,xrx200-mdio";
phy0: ethernet-phy@0 {
reg = <0x0>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy1: ethernet-phy@1 {
reg = <0x1>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy5: ethernet-phy@5 {
reg = <0x5>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy11: ethernet-phy@11 {
reg = <0x11>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy13: ethernet-phy@13 {
reg = <0x13>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
};
};

View file

@ -1,68 +0,0 @@
/dts-v1/;
#include "EASY80920.dtsi"
/ {
compatible = "lantiq,easy80920-nand", "lantiq,easy80920", "lantiq,xway", "lantiq,vr9";
model = "Intel EASY80920 Nand";
chosen {
bootargs = "ubi.mtd=ubi ubi.block=0,rootfsA root=/dev/ubiblock0_1";
};
fpi@10000000 {
localbus@0 {
ranges = <0 0 0x4000000 0x3ffffff>;
nand-parts@0 {
compatible = "lantiq,nand-xway";
lantiq,cs = <1>;
bank-width = <2>;
reg = <0 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x100000>; /* 1024 KB */
};
partition@100000 {
label = "uboot_env";
reg = <0x100000 0x40000>; /* 256 KB */
};
partition@140000 {
label = "ubootconfigB";
reg = <0x140000 0x40000>; /* 256 KB */
};
partition@180000 {
label = "gphyfirmware";
reg = <0x180000 0x40000>; /* 256 KB */
};
partition@1c0000 {
label = "ubi";
reg = <0x1c0000 0xc800000>;
};
partition@c9c0000 {
label = "calibration";
reg = <0xc9c0000 0x100000>;
};
partition@cac0000 {
label = "res";
reg = <0xcac0000 0x13540000>;
};
};
};
};
};
};

View file

@ -1,43 +0,0 @@
/dts-v1/;
#include "EASY80920.dtsi"
/ {
compatible = "lantiq,easy80920-nor", "lantiq,easy80920", "lantiq,xway", "lantiq,vr9";
model = "Intel EASY80920 Nor";
fpi@10000000 {
localbus@0 {
ranges = <0 0 0x0 0x3ffffff>;
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x10000>;
};
partition@10000 {
label = "uboot_env";
reg = <0x10000 0x10000>;
};
partition@20000 {
label = "firmware";
reg = <0x20000 0x7e0000>;
};
};
};
};
};
};

View file

@ -1,106 +0,0 @@
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include "falcon.dtsi"
#include "falcon-sflash-16M.dtsi"
/ {
model = "Lantiq Falcon FTTDP8 Reference Board";
compatible = "lantiq,easy88388", "lantiq,falcon";
aliases {
spi0 = &ebu_cs0;
};
memory@0 {
device_type = "memory";
reg = <0x0 0x4000000>; // 64M at 0x0
};
gpio-keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
linux,code = <0x198>;
};
};
pinctrl {
led_pins: led-pins {
lantiq,pins = "io34", "io35", "io36", "io37", "io38",
"io39", "io40", "io41";
lantiq,function = "gpio";
};
};
easy88388-leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pins &bootled_pins>;
GPON {
label = "easy88388:green:gpon";
gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
TEST {
label = "easy88388:green:test";
gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
STATUS {
label = "easy88388:green:status";
gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
ERROR {
label = "easy88388:red:error";
gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
DSL1 {
label = "easy88388:dsl:1";
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
DSL2 {
label = "easy88388:dsl:2";
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
DSL3 {
label = "easy88388:dsl:3";
gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
DSL4 {
label = "easy88388:dsl:4";
gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
DSL5 {
label = "easy88388:dsl:5";
gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
DSL6 {
label = "easy88388:dsl:6";
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
DSL7 {
label = "easy88388:dsl:7";
gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
DSL8 {
label = "easy88388:dsl:8";
gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
};

View file

@ -1,80 +0,0 @@
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include "falcon.dtsi"
#include "falcon-sflash-16M.dtsi"
/ {
model = "Lantiq Falcon FTTdp G.FAST Reference Board";
compatible = "lantiq,easy88444", "lantiq,falcon";
aliases {
spi0 = &ebu_cs0;
};
memory@0 {
device_type = "memory";
reg = <0x0 0x4000000>; // 64M at 0x0
};
gpio-keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
linux,code = <0x198>;
};
};
pinctrl {
led_pins: led-pins {
lantiq,pins = "io34", "io35", "io37";
lantiq,function = "gpio";
};
};
easy88444-leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pins &bootled_pins>;
GPON {
label = "easy88444:green:gpon";
gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
TEST {
label = "easy88444:green:test";
gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
STATUS {
label = "easy88444:green:status";
gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
GFAST1 {
label = "easy88444:gfast:1";
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
GFAST2 {
label = "easy88444:gfast:2";
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
GFAST3 {
label = "easy88444:gfast:3";
gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
GFAST4 {
label = "easy88444:gfast:4";
gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
};

View file

@ -1,110 +0,0 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
/ {
compatible = "lantiq,easy98000", "lantiq,falcon";
memory@0 {
device_type = "memory";
reg = <0x0 0x4000000>;
};
easy98000-leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&bootled_pins>;
LED_0 {
label = "easy98000:green:gpon";
gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
LED_1 {
label = "easy98000:red:gpon";
gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
LED_2 {
label = "easy98000:green:gpon_tx";
gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
LED_3 {
label = "easy98000:green:gpon_rx";
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
LED_4 {
label = "easy98000:green:voice";
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
LED_5 {
label = "easy98000:green:status";
gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
};
};
&ebu_cs1 {
eth0: ethernet@0000000 {
compatible = "davicom,dm9000";
device_type = "network";
reg = <0x0000003 0x1>, <0x0000001 0x1>;
reg-names = "addr", "data";
interrupt-parent = <&gpio1>;
#interrupt-cells = <2>;
interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
local-mac-address = [ 00 00 00 00 00 00 ];
};
cpld@3c00000 {
compatible = "lantiq,easy98000_addon";
reg = <0x3c00000 0x2>;
};
cpld@3c0000c {
compatible = "lantiq,easy98000_cpld_led";
reg = <0x3c0000c 0x2>, <0x3c00012 0x2>;
};
};
/* // enable this for second uart:
&serial1 {
status = "okay";
};*/
&spi {
status = "okay";
eeprom@1 {
compatible = "atmel,at25", "atmel,at25160n";
reg = <2>;
spi-max-frequency = <1000000>;
spi-cpha;
spi-cpol;
pagesize = <32>;
size = <2048>;
address-width = <16>;
};
};
&i2c {
status = "okay";
clock-frequency = <100000>;
/* eeprom-emulation by OMU */
eeprom@50 {
compatible = "at,24c02";
reg = <0x50>;
};
eeprom@51 {
compatible = "at,24c02";
reg = <0x51>;
};
};

View file

@ -1,40 +0,0 @@
/dts-v1/;
#include "falcon.dtsi"
#include "EASY98000-base.dtsi"
/ {
model = "Lantiq Falcon (NAND)";
compatible = "lantiq,easy98000-nand", "lantiq,easy98000", "lantiq,falcon";
aliases {
spi0 = &spi;
};
};
&ebu_cs0 {
gen_nand@0 {
compatible = "gen_nand", "lantiq,nand-falcon";
bank-width = <1>;
reg = <0x0 0x40000>;
#address-cells = <1>;
#size-cells = <1>;
linux,mtd-name = "gen_nand";
bbt-use-flash;
partition@0 {
label = "uboot";
reg = <0x00000 0x40000>;
};
partition@10000 {
label = "uboot_env";
reg = <0x40000 0x40000>;
};
partition@20000 {
label = "linux";
reg = <0x80000 0x3d0000>;
};
};
};

View file

@ -1,38 +0,0 @@
/dts-v1/;
#include "falcon.dtsi"
#include "EASY98000-base.dtsi"
/ {
model = "Lantiq Falcon (NOR)";
compatible = "lantiq,easy98000-nor", "lantiq,easy98000", "lantiq,falcon";
aliases {
spi0 = &spi;
};
};
&ebu_cs0 {
cfi@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0x0 0x4000000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x40000>;
};
partition@10000 {
label = "uboot_env";
reg = <0x40000 0x40000>;
};
partition@20000 {
label = "linux";
reg = <0x80000 0x3d0000>;
};
};
};

View file

@ -1,16 +0,0 @@
/dts-v1/;
#include "falcon.dtsi"
#include "EASY98000-base.dtsi"
#include "falcon-sflash-16M.dtsi"
/ {
model = "Lantiq Falcon (SFLASH)";
compatible = "lantiq,easy98000-sflash", "lantiq,easy98000", "lantiq,falcon";
aliases {
spi0 = &ebu_cs0;
spi1 = &spi;
};
};

View file

@ -1,95 +0,0 @@
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include "falcon.dtsi"
#include "falcon-sflash-16M.dtsi"
/ {
model = "Lantiq Falcon Reference Board";
compatible = "lantiq,easy98020", "lantiq,falcon";
aliases {
spi0 = &ebu_cs0;
};
memory@0 {
device_type = "memory";
reg = <0x0 0x4000000>; // 64M at 0x0
};
gpio-keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
linux,code = <0x198>;
};
};
pinctrl {
led_pins: phy-led-pins {
lantiq,pins = "io42", "io41", "io38", "io37";
lantiq,function = "gpio";
};
};
easy98020-leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&bootled_pins>;
GPON {
label = "easy98020:green:gpon";
gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
TEST {
label = "easy98020:green:test";
gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
ETH {
label = "easy98020:green:status";
gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
VOICE {
label = "easy98020:green:voice";
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
VIDEO {
label = "easy98020:green:video";
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
};
easy98020-phy-leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pins>;
GE0_ACT {
label = "easy98020:ge0_act";
gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
GE0_LINK {
label = "easy98020:ge0_link";
gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
GE1_ACT {
label = "easy98020:ge1_act";
gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
GE1_LINK {
label = "easy98020:ge1_link";
gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
};

View file

@ -1,68 +0,0 @@
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include "falcon.dtsi"
#include "falcon-sflash-16M.dtsi"
/ {
model = "Lantiq Falcon Reference Board V1.8";
compatible = "lantiq,easy98020-v18", "lantiq,easy98020", "lantiq,falcon";
aliases {
spi0 = &ebu_cs0;
};
memory@0 {
device_type = "memory";
reg = <0x0 0x4000000>; // 64M at 0x0
};
gpio-keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
linux,code = <0x198>;
};
};
pinctrl {
led_pins: led-pins {
lantiq,pins = "io11", "io14", "io36", "io37", "io38";
lantiq,function = "gpio";
};
};
easy98020-leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pins &bootled_pins>;
GPON {
label = "easy98020:green:gpon";
gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
TEST {
label = "easy98020:green:test";
gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
ETH {
label = "easy98020:green:status";
gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
VOICE {
label = "easy98020:green:voice";
gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
VIDEO {
label = "easy98020:green:video";
gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
};
};

View file

@ -1,81 +0,0 @@
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include "falcon.dtsi"
#include "falcon-sflash-16M.dtsi"
/ {
model = "Lantiq Falcon HGU Reference Board";
compatible = "lantiq,easy98021", "lantiq,easy98020", "lantiq,falcon";
aliases {
spi0 = &ebu_cs0;
};
memory@0 {
device_type = "memory";
reg = <0x0 0x4000000>; // 64M at 0x0
};
gpio-keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
linux,code = <0x198>;
};
};
gpio-mmc {
/* Place-holder for SIM-Card connector,
to list the used GPIOs, no official binding */
compatible = "gpio-mmc";
gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>,
<&gpio0 3 GPIO_ACTIVE_HIGH>,
<&gpio0 2 GPIO_ACTIVE_HIGH>,
<0>; /* no CS */
gpio-names = "di", "do", "clk", "cs";
reset-gpio = <&gpio3 24 GPIO_ACTIVE_HIGH>;
};
pinctrl {
led_pins: led-pins {
lantiq,pins = "io11", "io14", "io36", "io37", "io38";
lantiq,function = "gpio";
};
};
easy98021-leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pins &bootled_pins>;
GPON {
label = "easy98021:green:gpon";
gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
TEST {
label = "easy98021:red:test";
gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
ETH {
label = "easy98021:green:status";
gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
VOICE {
label = "easy98021:green:voice";
gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
SIMCARD {
label = "easy98021:green:simcard";
gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
};
};

View file

@ -1,76 +0,0 @@
/dts-v1/;
#include "falcon.dtsi"
#include "falcon-sflash-16M.dtsi"
/ {
model = "Lantiq Falcon SFP Stick with SyncE";
compatible = "lantiq,easy98035synce", "lantiq,falcon-sfp", "lantiq,falcon";
aliases {
spi0 = &ebu_cs0;
};
memory@0 {
device_type = "memory";
reg = <0x0 0x4000000>; // 64M at 0x0
};
pinctrl {
compatible = "lantiq,pinctrl-falcon";
asc0_func1: func1 {
func1_tx {
lantiq,pins = "io32";
lantiq,mux = <1>;
lantiq,input = <0>;
};
func1_rx {
lantiq,pins = "io33";
lantiq,mux = <0>;
};
};
asc0_func2: func2 {
func2_tx {
lantiq,pins = "io32";
lantiq,mux = <0>;
};
func2_rx {
lantiq,pins = "io33";
lantiq,mux = <1>;
lantiq,input = <0>;
};
};
asc0_func3: func3 {
func3_tx {
lantiq,pins = "io32";
lantiq,mux = <1>;
lantiq,input = <0>;
};
func3_rx {
lantiq,pins = "io33";
lantiq,mux = <1>;
lantiq,input = <0>;
};
};
};
pinselect-asc0 {
compatible = "lantiq,pinselect-asc0";
pinctrl-names = "asc0", "func1", "func2", "func3";
pinctrl-0 = <&asc0_pins>;
pinctrl-1 = <&asc0_func1>;
pinctrl-2 = <&asc0_func2>;
pinctrl-3 = <&asc0_func3>;
};
};
&serial0 {
pinctrl-names = "default";
/* use "empty" pinctrl to leave setting from u-boot enabled */
pinctrl-0 = < >;
};
&i2c {
status = "okay";
};

View file

@ -1,76 +0,0 @@
/dts-v1/;
#include "falcon.dtsi"
#include "falcon-sflash-16M.dtsi"
/ {
model = "Lantiq Falcon SFP Stick with SyncE/1588";
compatible = "lantiq,easy98035synce1588", "lantiq,falcon-sfp", "lantiq,falcon";
aliases {
spi0 = &ebu_cs0;
};
memory@0 {
device_type = "memory";
reg = <0x0 0x4000000>; // 64M at 0x0
};
pinctrl {
compatible = "lantiq,pinctrl-falcon";
asc0_func1: func1 {
func1_tx {
lantiq,pins = "io32";
lantiq,mux = <1>;
lantiq,input = <0>;
};
func1_rx {
lantiq,pins = "io33";
lantiq,mux = <0>;
};
};
asc0_func2: func2 {
func2_tx {
lantiq,pins = "io32";
lantiq,mux = <0>;
};
func2_rx {
lantiq,pins = "io33";
lantiq,mux = <1>;
lantiq,input = <0>;
};
};
asc0_func3: func3 {
func3_tx {
lantiq,pins = "io32";
lantiq,mux = <1>;
lantiq,input = <0>;
};
func3_rx {
lantiq,pins = "io33";
lantiq,mux = <1>;
lantiq,input = <0>;
};
};
};
pinselect-asc0 {
compatible = "lantiq,pinselect-asc0";
pinctrl-names = "asc0", "func1", "func2", "func3";
pinctrl-0 = <&asc0_pins>;
pinctrl-1 = <&asc0_func1>;
pinctrl-2 = <&asc0_func2>;
pinctrl-3 = <&asc0_func3>;
};
};
&serial0 {
pinctrl-names = "default";
/* use "empty" pinctrl to leave setting from u-boot enabled */
pinctrl-0 = < >;
};
&i2c {
status = "okay";
};

View file

@ -1,53 +0,0 @@
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include "falcon.dtsi"
#include "falcon-sflash-16M.dtsi"
/ {
model = "Lantiq Falcon / Vinax MDU Board";
compatible = "lantiq,falcon-mdu", "lantiq,falcon";
aliases {
spi0 = &ebu_cs0;
};
memory@0 {
device_type = "memory";
reg = <0x0 0x4000000>; // 64M at 0x0
};
mdu-leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&bootled_pins>;
LED_0 {
label = "mdu:green:gpon";
gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
LED_1 {
label = "mdu:green:status";
gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
LED_2 {
label = "mdu:green:2";
gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
LED_3 {
label = "mdu:green:3";
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
LED_4 {
label = "mdu:green:4";
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
};
};

View file

@ -1,76 +0,0 @@
/dts-v1/;
#include "falcon.dtsi"
#include "falcon-sflash-16M.dtsi"
/ {
model = "Lantiq Falcon SFP Stick";
compatible = "lantiq,falcon-sfp", "lantiq,falcon";
aliases {
spi0 = &ebu_cs0;
};
memory@0 {
device_type = "memory";
reg = <0x0 0x4000000>; // 64M at 0x0
};
pinctrl {
compatible = "lantiq,pinctrl-falcon";
asc0_func1: func1 {
func1_tx {
lantiq,pins = "io32";
lantiq,mux = <1>;
lantiq,output = <0>;
};
func1_rx {
lantiq,pins = "io33";
lantiq,mux = <0>;
};
};
asc0_func2: func2 {
func2_tx {
lantiq,pins = "io32";
lantiq,mux = <0>;
};
func2_rx {
lantiq,pins = "io33";
lantiq,mux = <1>;
lantiq,input = <0>;
};
};
asc0_func3: func3 {
func3_tx {
lantiq,pins = "io32";
lantiq,mux = <1>;
lantiq,output = <0>;
};
func3_rx {
lantiq,pins = "io33";
lantiq,mux = <1>;
lantiq,input = <0>;
};
};
};
pinselect-asc0 {
compatible = "lantiq,pinselect-asc0";
pinctrl-names = "asc0", "func1", "func2", "func3";
pinctrl-0 = <&asc0_pins>;
pinctrl-1 = <&asc0_func1>;
pinctrl-2 = <&asc0_func2>;
pinctrl-3 = <&asc0_func3>;
};
};
&serial0 {
pinctrl-names = "default";
/* use "empty" pinctrl to leave setting from u-boot enabled */
pinctrl-0 = < >;
};
&i2c {
status = "okay";
};

View file

@ -1,288 +0,0 @@
/dts-v1/;
#include "vr9.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "avm,fritz3370", "lantiq,xway", "lantiq,vr9";
model = "Fritz!Box WLAN 3370";
chosen {
bootargs = "console=ttyLTQ0,115200 ubi.mtd=1,512 root=/dev/mtdblock9";
};
aliases {
led-boot = &power_green;
led-failsafe = &power_red;
led-running = &power_green;
led-dsl = &dsl;
led-internet = &info_green;
led-wifi = &wifi;
};
memory@0 {
reg = <0x0 0x8000000>;
};
fpi@10000000 {
localbus@0 {
nand-parts@0 {
compatible = "lantiq,nand-xway";
bank-width = <2>;
reg = <1 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "kernel";
reg = <0x0 0x400000>;
};
partition@400000 {
label = "rootfs_ubi";
reg = <0x400000 0x3000000>;
};
partition@3400000 {
label = "vr9_firmware";
reg = <0x3400000 0x400000>;
};
partition@3800000 {
label = "reserved";
reg = <0x3800000 0x3000000>;
};
partition@6800000 {
label = "config";
reg = <0x6800000 0x200000>;
};
partition@6a00000 {
label = "nand-filesystem";
reg = <0x6a00000 0x1600000>;
};
};
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
mdio {
lantiq,groups = "mdio";
lantiq,function = "mdio";
};
nand {
lantiq,groups = "nand cle", "nand ale",
"nand rd", "nand cs1", "nand rdy";
lantiq,function = "ebu";
lantiq,pull = <1>;
};
phy-rst {
lantiq,pins = "io37", "io44";
lantiq,pull = <0>;
lantiq,open-drain = <0>;
lantiq,output = <1>;
};
pcie-rst {
lantiq,pins = "io38";
lantiq,pull = <0>;
lantiq,output = <1>;
};
};
pins_spi_default: pins_spi_default {
spi_in {
lantiq,groups = "spi_di";
lantiq,function = "spi";
};
spi_out {
lantiq,groups = "spi_do", "spi_clk",
"spi_cs4";
lantiq,function = "spi";
lantiq,output = <1>;
};
};
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 5 GPIO_ACTIVE_HIGH
&gpio 14 GPIO_ACTIVE_HIGH>;
lantiq,portmask = <0x3>;
};
};
gphy-xrx200 {
compatible = "lantiq,phy-xrx200";
firmware = "lantiq/xrx200_phy11g_a14.bin";
phys = [ 00 01 ];
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
power {
label = "power";
gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_POWER>;
};
/* wifi {
label = "wifi";
gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
linux,code = <BTN_1>;
};*/
};
gpio-leds {
compatible = "gpio-leds";
power_green: power {
label = "fritz3370:green:power";
gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
power_red: power2 {
label = "fritz3370:red:power";
gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
};
info_red {
label = "fritz3370:red:info";
gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
};
wifi: wifi {
label = "fritz3370:green:wlan";
gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
};
dsl: dsl {
label = "fritz3370:green:dsl";
gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
};
lan {
label = "fritz3370:green:lan";
gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
};
info_green: info_green {
label = "fritz3370:green:info";
gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
};
};
};
&spi {
pinctrl-names = "default";
pinctrl-0 = <&pins_spi_default>;
status = "ok";
m25p80@4 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <4 0>;
spi-max-frequency = <1000000>;
urlader: partition@0 {
reg = <0x0 0x20000>;
label = "urlader";
read-only;
};
partition@20000 {
reg = <0x20000 0x10000>;
label = "tffs (1)";
read-only;
};
partition@30000 {
reg = <0x30000 0x10000>;
label = "tffs (2)";
read-only;
};
};
};
&eth0 {
lan: interface@0 {
compatible = "lantiq,xrx200-pdi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
mtd-mac-address = <&urlader 0x987>;
mtd-mac-address-increment = <(-2)>;
lantiq,switch;
ethernet@0 {
compatible = "lantiq,xrx200-pdi-port";
reg = <0>;
phy-mode = "rgmii";
phy-handle = <&phy0>;
gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
};
ethernet@1 {
compatible = "lantiq,xrx200-pdi-port";
reg = <1>;
phy-mode = "rgmii";
phy-handle = <&phy1>;
gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
};
ethernet@2 {
compatible = "lantiq,xrx200-pdi-port";
reg = <2>;
phy-mode = "gmii";
phy-handle = <&phy11>;
};
ethernet@3 {
compatible = "lantiq,xrx200-pdi-port";
reg = <4>;
phy-mode = "gmii";
phy-handle = <&phy13>;
};
};
mdio@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,xrx200-mdio";
phy0: ethernet-phy@0 {
reg = <0x0>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy1: ethernet-phy@1 {
reg = <0x1>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy11: ethernet-phy@11 {
reg = <0x11>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy13: ethernet-phy@13 {
reg = <0x13>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
};
};
&pcie0 {
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
wifi@0,0 {
compatible = "pci0,0";
reg = <0 0 0 0 0>;
qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */
};
};
};

View file

@ -1,161 +0,0 @@
/dts-v1/;
#include "ar9.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "avm,fritz7320", "lantiq,xway", "lantiq,ar9";
model = "1&1 HomeServer";
chosen {
bootargs = "console=ttyLTQ0,115200";
};
aliases {
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-internet = &info_green;
led-dsl = &power;
led-wifi = &wlan;
};
memory@0 {
reg = <0x0 0x4000000>;
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x1000000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
ath9k_cal: partition@0 {
label = "urlader";
reg = <0x00000 0x20000>;
read-only;
};
partition@20000 {
label = "firmware";
reg = <0x20000 0xf60000>;
};
partition@f80000 {
label = "tffs (1)";
reg = <0xf80000 0x40000>;
read-only;
};
partition@fc0000 {
label = "tffs (2)";
reg = <0xfc0000 0x40000>;
read-only;
};
};
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
pci {
lantiq,groups = "gnt1", "req1", "req2", "req3", "req4", "gnt2", "gnt3", "gnt4";
lantiq,function = "pci";
};
pci-in {
lantiq,groups = "req1", "req2", "req3", "req4";
lantiq,output = <0>;
lantiq,open-drain = <1>;
lantiq,pull = <2>;
};
pci-out {
lantiq,groups = "gnt1", "gnt2", "gnt3", "gnt4";
lantiq,output = <1>;
lantiq,pull = <0>;
};
};
};
etop@E180000 {
phy-mode = "mii";
mtd-mac-address = <&ath9k_cal 0xa91>;
mtd-mac-address-increment = <(-2)>;
};
ifxhcd@E101000 {
status = "okay";
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
rfkill {
label = "rfkill";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
dect {
label = "dect";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PHONE>;
};
};
gpio-leds {
compatible = "gpio-leds";
power: power {
label = "fritz7320:green:power";
gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
voice {
label = "fritz7320:green:fon";
gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
};
dect {
label = "fritz7320:green:dect";
gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
};
wlan: wlan {
label = "fritz7320:green:wlan";
gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
};
info_green: info_green {
label = "fritz7320:green:info";
gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
};
info_red {
label = "fritz7320:red:info";
gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
};
};
};
&pci0 {
status = "okay";
req-mask = <0xf>;
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
wifi@0,0 {
compatible = "pci0,0";
reg = <0x7000 0 0 0 0>;
qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
};
};

View file

@ -1,228 +0,0 @@
/dts-v1/;
#include "vr9.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "avm,fritz7360sl", "lantiq,xway", "lantiq,vr9";
model = "1&1 HomeServer";
chosen {
bootargs = "console=ttyLTQ0,115200";
};
aliases {
led-boot = &power_green;
led-failsafe = &power_red;
led-running = &power_green;
led-dsl = &info_green;
led-wifi = &wifi;
};
memory@0 {
reg = <0x0 0x8000000>;
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x1000000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
urlader: partition@0 {
label = "urlader";
reg = <0x00000 0x20000>;
read-only;
};
partition@20000 {
label = "firmware";
reg = <0x20000 0xf60000>;
};
partition@f80000 {
label = "tffs (1)";
reg = <0xf80000 0x40000>;
read-only;
};
partition@fc0000 {
label = "tffs (2)";
reg = <0xfc0000 0x40000>;
read-only;
};
};
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
mdio {
lantiq,groups = "mdio";
lantiq,function = "mdio";
};
phy-rst {
lantiq,pins = "io37", "io44";
lantiq,pull = <0>;
lantiq,open-drain;
lantiq,output = <1>;
};
pcie-rst {
lantiq,pins = "io38";
lantiq,pull = <0>;
lantiq,output = <1>;
};
};
};
ifxhcd@E101000 {
status = "okay";
lantiq,portmask = <0x3>;
};
ifxhcd@E106000 {
status = "okay";
};
};
gphy-xrx200 {
compatible = "lantiq,phy-xrx200";
firmware = "lantiq/xrx200_phy11g_a22.bin";
phys = [ 00 01 ];
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
dect {
label = "dect";
gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_PHONE>;
};
wifi {
label = "wifi";
gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_WLAN>;
};
};
gpio-leds {
compatible = "gpio-leds";
power_green: power {
label = "fritz7360sl:green:power";
gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
power_red: power2 {
label = "fritz7360sl:red:power";
gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
};
info_red {
label = "fritz7360sl:red:info";
gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
};
info_green: info_green {
label = "fritz7360sl:green:info";
gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
};
wifi: wifi {
label = "fritz7360sl:green:wlan";
gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
};
dect {
label = "fritz7360sl:green:dect";
gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
};
};
};
&eth0 {
lan: interface@0 {
compatible = "lantiq,xrx200-pdi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
mtd-mac-address = <&urlader 0xa91>;
mtd-mac-address-increment = <(-2)>;
lantiq,switch;
ethernet@0 {
compatible = "lantiq,xrx200-pdi-port";
reg = <0>;
phy-mode = "rmii";
phy-handle = <&phy0>;
};
ethernet@1 {
compatible = "lantiq,xrx200-pdi-port";
reg = <1>;
phy-mode = "rmii";
phy-handle = <&phy1>;
};
ethernet@2 {
compatible = "lantiq,xrx200-pdi-port";
reg = <2>;
phy-mode = "gmii";
phy-handle = <&phy11>;
};
ethernet@3 {
compatible = "lantiq,xrx200-pdi-port";
reg = <4>;
phy-mode = "gmii";
phy-handle = <&phy13>;
};
};
mdio@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,xrx200-mdio";
phy0: ethernet-phy@0 {
reg = <0x00>;
compatible = "ethernet-phy-ieee802.3-c22";
reset-gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
};
phy1: ethernet-phy@1 {
reg = <0x01>;
compatible = "ethernet-phy-ieee802.3-c22";
reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
};
phy11: ethernet-phy@11 {
reg = <0x11>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy13: ethernet-phy@13 {
reg = <0x13>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
};
};
&pcie0 {
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
wifi@168c,002e {
compatible = "pci168c,002e";
reg = <0 0 0 0 0>;
qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */
};
};
};

View file

@ -1,122 +0,0 @@
/dts-v1/;
#include "danube.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "siemens,gigaset-sx76x", "lantiq,xway", "lantiq,danube";
model = "Gigaset SX761,SX762,SX763";
chosen {
bootargs = "console=ttyLTQ0,115200";
};
memory@0 {
reg = <0x0 0x2000000>;
};
sram@1F000000 {
vmmc@107000 {
status = "okay";
gpios = <&gpiomm 1 GPIO_ACTIVE_HIGH>;
};
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x0 0x30000>;
};
partition@10000 {
label = "uboot_env";
reg = <0x30000 0x10000>;
};
partition@40000 {
label = "firmware";
reg = <0x40000 0x7c0000>;
};
};
};
gpiomm: gpiomm@4000000 {
compatible = "lantiq,gpio-mm";
reg = <1 0x0 0x10 >;
#address-cells = <1>;
#size-cells = <1>;
#gpio-cells = <2>;
gpio-controller;
lantiq,shadow = <0x3>;
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
stp {
lantiq,groups = "stp";
lantiq,function = "stp";
};
};
};
gpios: stp@E100BB0 {
status = "okay";
};
etop@E180000 {
phy-mode = "rmii";
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
};
pci@E105400 {
status = "okay";
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_RESTART>;
};
};
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
switch {
gpio-export,name = "switch";
gpio-export,output = <1>;
gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
};
};
};

View file

@ -1,159 +0,0 @@
/dts-v1/;
#include "ar9.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "zte,h201l", "lantiq,xway", "lantiq,ar9";
model = "ZTE H210L";
chosen {
bootargs = "console=ttyLTQ0,115200";
};
aliases {
led-boot = &power_green;
led-failsafe = &power_green;
led-running = &power_green;
led-dsl = &dsl;
led-internet = &online;
led-usb = &usb;
led-wifi = &wifi;
};
memory@0 {
reg = <0x0 0x2000000>;
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x20000>;
read-only;
};
partition@20000 {
label = "uboot_env";
reg = <0x20000 0x10000>;
read-only;
};
partition@30000 {
label = "firmware";
reg = <0x30000 0x7d0000>;
};
};
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
};
};
etop@E180000 {
phy-mode = "rgmii";
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio 53 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio 54 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
rfkill {
label = "rfkill";
gpios = <&gpio 55 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
};
gpio-leds {
compatible = "gpio-leds";
power_green: power {
label = "h201l:green:power";
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
online: online {
label = "h201l:green:internet";
gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
};
dsl: dsl {
label = "h201l:green:dsl";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
phone {
label = "h201l:green:phone";
gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
};
wps {
label = "h201l:green:wps";
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
};
wifi: wifi {
label = "h201l:green:wlan";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
};
usb: usb {
label = "h201l:green:usb";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
};
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
switch {
gpio-export,name = "switch";
gpio-export,output = <1>;
gpios = <&gpio 38 GPIO_ACTIVE_HIGH>;
};
usb {
gpio-export,name = "usb";
gpio-export,output = <1>;
gpios = <&gpio 28 GPIO_ACTIVE_HIGH>;
};
wifi {
gpio-export,name = "wifi";
gpio-export,output = <1>;
gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
};
};
};

View file

@ -1,190 +0,0 @@
/dts-v1/;
#include "ar9.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "zyxel,p-2601hn", "lantiq,xway", "lantiq,ar9";
model = "ZyXEL P-2601HN-Fx";
chosen {
bootargs = "console=ttyLTQ0,115200";
};
aliases {
led-boot = &power_green;
led-failsafe = &power_red;
led-running = &power_green;
led-dsl = &dsl;
led-internet = &online;
led-wifi = &wifi;
};
memory@0 {
reg = <0x0 0x4000000>;
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x40000>;
read-only;
};
partition@40000 {
label = "uboot_env";
reg = <0x40000 0x20000>;
read-only;
};
partition@60000 {
label = "firmware";
reg = <0x60000 0xfa0000>;
};
};
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
stp {
lantiq,groups = "stp";
lantiq,function = "stp";
lantiq,pull = <2>;
lantiq,open-drain = <0>;
lantiq,output = <1>;
};
exin {
lantiq,groups = "exin1";
lantiq,function = "exin";
};
pci {
lantiq,groups = "gnt1";
lantiq,function = "pci";
};
conf_out {
lantiq,pins = "io4", "io5", "io6";
lantiq,open-drain;
lantiq,pull = <0>;
};
mdio {
lantiq,groups = "mdio";
lantiq,function = "mdio";
};
};
};
etop@E180000 {
phy-mode = "rmii";
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
};
stp: stp@E100BB0 {
#gpio-cells = <2>;
compatible = "lantiq,gpio-stp-xway";
gpio-controller;
reg = <0xE100BB0 0x40>;
lantiq,shadow = <0xfff>;
lantiq,groups = <0x3>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio 53 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
rfkill {
label = "rfkill";
gpios = <&gpio 54 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
};
gpio-leds {
compatible = "gpio-leds";
power_green: power {
label = "p2601hnfx:green:power";
gpios = <&stp 11 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
power_red: power2 {
label = "p2601hnfx:red:power";
gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
};
online: online {
label = "p2601hnfx:green:internet";
gpios = <&stp 13 GPIO_ACTIVE_LOW>;
};
online2 {
label = "p2601hnfx:red:internet";
gpios = <&stp 12 GPIO_ACTIVE_LOW>;
};
dsl: dsl {
label = "p2601hnfx:green:dsl";
gpios = <&stp 14 GPIO_ACTIVE_LOW>;
};
phone {
label = "p2601hnfx:green:phone";
gpios = <&stp 9 GPIO_ACTIVE_LOW>;
};
phone2 {
label = "p2601hnfx:orange:phone";
gpios = <&stp 8 GPIO_ACTIVE_LOW>;
};
wifi: wifi {
label = "p2601hnfx:green:wireless";
gpios = <&stp 15 GPIO_ACTIVE_LOW>;
};
wifi2 {
label = "p2601hnfx:orange:wireless";
gpios = <&stp 10 GPIO_ACTIVE_LOW>;
};
};
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
switch {
gpio-export,name = "switch";
gpio-export,output = <1>;
gpios = <&gpio 50 GPIO_ACTIVE_HIGH>;
};
usb {
gpio-export,name = "wifi";
gpio-export,output = <1>;
gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
};
};
};

View file

@ -1,72 +0,0 @@
/dts-v1/;
#include "P2812HNUFX.dtsi"
/ {
compatible = "zyxel,p-2812hnu-f1", "zyxel,p-2812hnu", "lantiq,xway", "lantiq,vr9";
model = "ZyXEL P-2812HNU-F1";
aliases {
led-usb = &usb1;
led-usb2 = &usb2;
};
fpi@10000000 {
localbus@0 {
nand-parts@0 {
compatible = "lantiq,nand-xway";
lantiq,cs = <1>;
bank-width = <2>;
reg = <0 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x40000>;
};
partition@40000 {
label = "uboot-env";
reg = <0x40000 0x20000>;
};
partition@60000 {
label = "kernel";
reg = <0x60000 0x200000>;
};
partition@260000 {
label = "ubi";
reg = <0x260000 0x7da0000>;
};
};
};
};
pcie@d900000 {
status = "disabled";
};
};
gpio-leds {
usb1: usb1 {
label = "p2812hnuf1:green:usb1";
gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
};
usb2: usb2 {
label = "p2812hnuf1:green:usb2";
gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
};
};
};
&pci0 {
wifi@1814,3062 {
compatible = "pci1814,3062";
reg = <0x7000 0 0 0 0>;
ralink,eeprom = "RT3062.eeprom";
};
};

View file

@ -1,66 +0,0 @@
/dts-v1/;
#include "P2812HNUFX.dtsi"
/ {
compatible = "zyxel,p-2812hnu-f3", "zyxel,p-2812hnu", "lantiq,xway", "lantiq,vr9";
model = "ZyXEL P-2812HNU-F3";
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x800000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x0 0x50000>;
read-only;
};
partition@50000 {
label = "uboot-env";
reg = <0x50000 0x10000>;
};
partition@60000 {
label = "unused";
reg = <0x60000 0x7a0000>;
};
};
};
nand-parts@0 {
compatible = "lantiq,nand-xway";
lantiq,cs = <1>;
bank-width = <2>;
reg = <1 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "kernel";
reg = <0x0 0x200000>;
};
partition@200000 {
label = "ubi";
reg = <0x200000 0x7e00000>;
};
};
};
};
};
&pci0 {
wifi@1814,3092 {
compatible = "pci1814,3092";
reg = <0x7000 0 0 0 0>;
ralink,eeprom = "RT3092.eeprom";
};
};

View file

@ -1,280 +0,0 @@
#include "vr9.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "zyxel,p-2812hnu", "lantiq,xway", "lantiq,vr9";
chosen {
bootargs = "console=ttyLTQ0,115200";
};
aliases {
led-boot = &power_green;
led-failsafe = &power_red;
led-running = &power_green;
led-dsl = &dsl_green;
led-internet = &internet_green;
led-wifi = &wireless_green;
};
memory@0 {
reg = <0x0 0x8000000>;
};
fpi@10000000 {
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
exin3 {
lantiq,groups = "exin3";
lantiq,function = "exin";
};
mdio {
lantiq,groups = "mdio";
lantiq,function = "mdio";
};
gphy-leds {
lantiq,groups = "gphy0 led1", "gphy1 led1",
"gphy0 led2", "gphy1 led2";
lantiq,function = "gphy";
lantiq,pull = <2>;
lantiq,open-drain = <0>;
lantiq,output = <1>;
};
stp {
lantiq,groups = "stp";
lantiq,function = "stp";
lantiq,pull = <2>;
lantiq,open-drain = <0>;
lantiq,output = <1>;
};
pci-in {
lantiq,groups = "req1";
lantiq,function = "pci";
lantiq,output = <0>;
lantiq,open-drain = <1>;
lantiq,pull = <2>;
};
pci-out {
lantiq,groups = "gnt1";
lantiq,function = "pci";
lantiq,output = <1>;
lantiq,open-drain = <0>;
lantiq,pull = <0>;
};
pci_rst {
lantiq,pins = "io21";
lantiq,output = <1>;
lantiq,open-drain = <0>;
lantiq,pull = <2>;
};
pcie-rst {
lantiq,pins = "io38";
lantiq,pull = <0>;
lantiq,output = <1>;
};
ifxhcd-rst {
lantiq,pins = "io33";
lantiq,pull = <0>;
lantiq,open-drain = <0>;
lantiq,output = <1>;
};
nand_out {
lantiq,groups = "nand cle", "nand ale";
lantiq,function = "ebu";
lantiq,output = <1>;
lantiq,open-drain = <0>;
lantiq,pull = <0>;
};
nand_cs1 {
lantiq,groups = "nand cs1";
lantiq,function = "ebu";
lantiq,open-drain = <0>;
lantiq,pull = <0>;
};
};
};
stp: stp@E100BB0 {
compatible = "lantiq,gpio-stp-xway";
reg = <0xE100BB0 0x40>;
#gpio-cells = <2>;
gpio-controller;
lantiq,shadow = <0xffffff>;
lantiq,groups = <0x7>;
lantiq,dsl = <0x0>;
lantiq,phy1 = <0x0>;
lantiq,phy2 = <0x0>;
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
lantiq,portmask = <0x3>;
};
ifxhcd@E106000 {
status = "okay";
gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
};
pci@E105400 {
status = "okay";
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
};
};
gphy-xrx200 {
compatible = "lantiq,phy-xrx200";
firmware1 = "lantiq/xrx200_phy11g_a14.bin"; /*VR9 1.1*/
firmware2 = "lantiq/xrx200_phy11g_a22.bin"; /*VR9 1.2*/
phys = [ 00 01 ];
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
rfkill {
label = "rfkill";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
};
gpio-leds {
compatible = "gpio-leds";
internet_red {
label = "p2812hnufx:red:internet";
gpios = <&stp 16 GPIO_ACTIVE_LOW>;
};
internet_green: internet_green {
label = "p2812hnufx:green:internet";
gpios = <&stp 17 GPIO_ACTIVE_LOW>;
};
dsl_green: dsl_green {
label = "p2812hnufx:green:dsl";
gpios = <&stp 18 GPIO_ACTIVE_LOW>;
};
dsl_orange {
label = "p2812hnufx:orange:dsl";
gpios = <&stp 19 GPIO_ACTIVE_LOW>;
};
wireless_orange {
label = "p2812hnufx:orange:wlan";
gpios = <&stp 20 GPIO_ACTIVE_LOW>;
};
wireless_green: wireless_green {
label = "p2812hnufx:green:wlan";
gpios = <&stp 21 GPIO_ACTIVE_LOW>;
};
power_red: power {
label = "p2812hnufx:red:power";
gpios = <&stp 22 GPIO_ACTIVE_LOW>;
};
power_green: power2 {
label = "p2812hnufx:green:power";
gpios = <&stp 23 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
phone1 {
label = "p2812hnufx:green:phone";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
phone1warn {
label = "p2812hnufx:orange:phone";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
phone2warn {
label = "p2812hnufx:orange:phone2";
gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
};
phone2 {
label = "p2812hnufx:green:phone2";
gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
};
};
};
&eth0 {
lan: interface@0 {
compatible = "lantiq,xrx200-pdi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
mac-address = [ 00 11 22 33 44 55 ];
lantiq,switch;
ethernet@0 {
compatible = "lantiq,xrx200-pdi-port";
reg = <0>;
phy-mode = "rgmii";
phy-handle = <&phy0>;
};
ethernet@1 {
compatible = "lantiq,xrx200-pdi-port";
reg = <1>;
phy-mode = "rgmii";
phy-handle = <&phy1>;
};
ethernet@2 {
compatible = "lantiq,xrx200-pdi-port";
reg = <2>;
phy-mode = "gmii";
phy-handle = <&phy11>;
};
ethernet@4 {
compatible = "lantiq,xrx200-pdi-port";
reg = <4>;
phy-mode = "gmii";
phy-handle = <&phy13>;
};
ethernet@5 {
compatible = "lantiq,xrx200-pdi-port";
reg = <5>;
phy-mode = "rgmii";
phy-handle = <&phy5>;
};
};
mdio@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,xrx200-mdio";
phy0: ethernet-phy@0 {
reg = <0x0>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy1: ethernet-phy@1 {
reg = <0x1>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy5: ethernet-phy@5 {
reg = <0x5>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy11: ethernet-phy@11 {
reg = <0x11>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy13: ethernet-phy@13 {
reg = <0x13>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
};
};

View file

@ -1,8 +0,0 @@
/dts-v1/;
#include "TDW89X0.dtsi"
/ {
compatible = "tplink,tdw8970", "tplink,tdw89x0", "lantiq,xway", "lantiq,vr9";
model = "TP-LINK TD-W8970";
};

View file

@ -1,35 +0,0 @@
/dts-v1/;
#include "TDW89X0.dtsi"
/ {
compatible = "tplink,tdw8980", "tplink,tdw89x0", "lantiq,xway", "lantiq,vr9";
model = "TP-LINK TD-W8980";
fpi@10000000 {
gpio: pinmux@E100B10 {
state_default: pinmux {
pci_rst {
lantiq,pins = "io21";
lantiq,output = <1>;
lantiq,open-drain;
};
};
};
pci@E105400 {
status = "okay";
lantiq,bus-clock = <33333333>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <0x7000 0 0 1 &icu0 30 1>;
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
};
};
gpio-leds {
wifi2 {
label = "tdw8980:green:wlan5ghz";
gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
};
};
};

View file

@ -1,274 +0,0 @@
#include "vr9.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "tplink,tdw89x0", "lantiq,xway", "lantiq,vr9";
chosen {
bootargs = "console=ttyLTQ0,115200";
};
aliases {
/* the power led can't be controlled, use the wps led instead */
led-boot = &wps;
led-failsafe = &wps;
led-dsl = &dsl;
led-internet = &internet;
led-wifi = &wifi;
led-usb = &usb0;
led-usb2 = &usb2;
};
memory@0 {
reg = <0x0 0x4000000>;
};
fpi@10000000 {
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
mdio {
lantiq,groups = "mdio";
lantiq,function = "mdio";
};
gphy-leds {
lantiq,groups = "gphy0 led1", "gphy1 led1";
lantiq,function = "gphy";
lantiq,pull = <2>;
lantiq,open-drain = <0>;
lantiq,output = <1>;
};
phy-rst {
lantiq,pins = "io42";
lantiq,pull = <0>;
lantiq,open-drain = <0>;
lantiq,output = <1>;
};
pcie-rst {
lantiq,pins = "io38";
lantiq,pull = <0>;
lantiq,output = <1>;
};
};
pins_spi_default: pins_spi_default {
spi_in {
lantiq,groups = "spi_di";
lantiq,function = "spi";
};
spi_out {
lantiq,groups = "spi_do", "spi_clk",
"spi_cs4";
lantiq,function = "spi";
lantiq,output = <1>;
};
};
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
lantiq,portmask = <0x3>;
};
ifxhcd@E106000 {
status = "okay";
gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
};
};
gphy-xrx200 {
compatible = "lantiq,phy-xrx200";
firmware = "lantiq/xrx200_phy11g_a22.bin";
phys = [ 00 01 ];
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wifi {
label = "wifi";
gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_RFKILL>;
linux,input-type = <EV_SW>;
};
wps {
label = "wps";
gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
gpio-leds {
compatible = "gpio-leds";
/*
power is not controllable via gpio
*/
dsl: dsl {
label = "tdw89x0:green:dsl";
gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
};
internet: internet {
label = "tdw89x0:green:internet";
gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
};
usb0: usb0 {
label = "tdw89x0:green:usb";
gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
};
usb2: usb2 {
label = "tdw89x0:green:usb2";
gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
};
wps: wps {
label = "tdw89x0:green:wps";
gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
};
};
wifi-leds {
compatible = "gpio-leds";
wifi: wifi {
label = "tdw89x0:green:wifi";
gpios = <&ath9k 0 GPIO_ACTIVE_HIGH>;
};
};
};
&spi {
pinctrl-names = "default";
pinctrl-0 = <&pins_spi_default>;
status = "ok";
m25p80@4 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <4 0>;
spi-max-frequency = <33250000>;
m25p,fast-read;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
reg = <0x0 0x20000>;
label = "u-boot";
read-only;
};
partition@20000 {
reg = <0x20000 0x7a0000>;
label = "firmware";
};
partition@7c0000 {
reg = <0x7c0000 0x10000>;
label = "config";
read-only;
};
ath9k_cal: partition@7d0000 {
reg = <0x7d0000 0x30000>;
label = "boardconfig";
read-only;
};
};
};
};
&eth0 {
lan: interface@0 {
compatible = "lantiq,xrx200-pdi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
mtd-mac-address = <&ath9k_cal 0xf100>;
lantiq,switch;
ethernet@0 {
compatible = "lantiq,xrx200-pdi-port";
reg = <0>;
phy-mode = "rgmii";
phy-handle = <&phy0>;
// gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
};
ethernet@5 {
compatible = "lantiq,xrx200-pdi-port";
reg = <5>;
phy-mode = "rgmii";
phy-handle = <&phy5>;
};
ethernet@2 {
compatible = "lantiq,xrx200-pdi-port";
reg = <2>;
phy-mode = "gmii";
phy-handle = <&phy11>;
};
ethernet@3 {
compatible = "lantiq,xrx200-pdi-port";
reg = <4>;
phy-mode = "gmii";
phy-handle = <&phy13>;
};
};
mdio@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,xrx200-mdio";
phy0: ethernet-phy@0 {
reg = <0x0>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy5: ethernet-phy@5 {
reg = <0x5>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy11: ethernet-phy@11 {
reg = <0x11>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy13: ethernet-phy@13 {
reg = <0x13>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
};
};
&pcie0 {
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
ath9k: wifi@168c,002e {
compatible = "pci168c,002e";
reg = <0 0 0 0 0>;
#gpio-cells = <2>;
gpio-controller;
qca,no-eeprom;
qca,disable-5ghz;
mtd-mac-address = <&ath9k_cal 0xf100>;
mtd-mac-address-increment = <2>;
};
};
};

View file

@ -1,163 +0,0 @@
/dts-v1/;
#include "vr9.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "arcadyan,vg3503j", "lantiq,xway", "lantiq,vr9";
model = "BT OpenReach VDSL Modem";
chosen {
bootargs = "console=ttyLTQ0,115200";
};
aliases {
led-boot = &power_green;
led-failsafe = &power_red;
led-running = &power_green;
led-dsl = &dsl;
};
memory@0 {
reg = <0x0 0x2000000>;
};
fpi@10000000 {
localbus@0 {
ranges = <0 0 0x0 0x3ffffff>;
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x20000>;
};
partition@20000 {
label = "firmware";
reg = <0x20000 0x7d0000>;
};
partition@7f0000 {
label = "uboot-env";
reg = <0x7f0000 0x10000>;
};
};
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
mdio {
lantiq,groups = "mdio";
lantiq,function = "mdio";
};
gphy-leds {
lantiq,groups = "gphy0 led0", "gphy0 led1",
"gphy0 led2", "gphy1 led0",
"gphy1 led1", "gphy1 led2";
lantiq,function = "gphy";
lantiq,pull = <2>;
lantiq,open-drain = <0>;
lantiq,output = <1>;
};
};
};
};
gphy-xrx200 {
compatible = "lantiq,phy-xrx200";
firmware1 = "lantiq/xrx200_phy11g_a14.bin"; /*VR9 1.1*/
firmware2 = "lantiq/xrx200_phy11g_a22.bin"; /*VR9 1.2*/
phys = [ 00 01 ];
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
power_red: power2 {
label = "vg3503j:red:power";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
dsl: dsl {
label = "vg3503j:green:dsl";
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
power_green: power {
label = "vg3503j:green:power";
gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
};
};
&eth0 {
interface@0 {
compatible = "lantiq,xrx200-pdi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
lantiq,switch;
ethernet@2 {
compatible = "lantiq,xrx200-pdi-port";
reg = <2>;
phy-mode = "mii";
phy-handle = <&phy11>;
};
ethernet@4 {
compatible = "lantiq,xrx200-pdi-port";
reg = <4>;
phy-mode = "mii";
phy-handle = <&phy13>;
};
};
mdio@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,xrx200-mdio";
phy11: ethernet-phy@11 {
reg = <0x11>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
lantiq,led1h = <0x70>;
lantiq,led1l = <0x00>;
lantiq,led2h = <0x00>;
lantiq,led2l = <0x03>;
};
phy13: ethernet-phy@13 {
reg = <0x13>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
lantiq,led1h = <0x70>;
lantiq,led1l = <0x00>;
lantiq,led2h = <0x00>;
lantiq,led2l = <0x03>;
};
};
};

View file

@ -1,253 +0,0 @@
#include "vr9.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "arcadyan,vgv7510kw22", "lantiq,xway", "lantiq,vr9";
chosen {
bootargs = "console=ttyLTQ0,115200 mem=62M vpe1_load_addr=0x83e00000 vpe1_mem=2M maxvpes=1 maxtcs=1 nosmp";
};
aliases {
led-boot = &power_green;
led-failsafe = &power_red;
led-running = &power_green;
led-dsl = &dsl;
led-internet = &internet_green;
led-wifi = &wifi;
};
sram@1F000000 {
vmmc@107000 {
status = "okay";
gpios = <&gpio 30 GPIO_ACTIVE_HIGH //fxs relay
&gpio 31 GPIO_ACTIVE_HIGH //still unknown
&gpio 3 GPIO_ACTIVE_HIGH>; //reset_slic?
};
};
memory@0 {
reg = <0x0 0x4000000>;
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x1000000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
boardconfig: partition@fe0000 {
label = "board_config";
reg = <0xfe0000 0x20000>;
read-only;
};
};
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
gphy-leds {
lantiq,groups = "gphy0 led0", "gphy0 led1",
"gphy1 led0", "gphy1 led1";
lantiq,function = "gphy";
lantiq,open-drain = <0>;
lantiq,pull = <2>;
lantiq,output = <1>;
};
mdio {
lantiq,groups = "mdio";
lantiq,function = "mdio";
};
pci-rst {
lantiq,pins = "io21";
lantiq,open-drain = <0>;
lantiq,pull = <0>;
lantiq,output = <1>;
};
};
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
};
pcie@d900000 {
status = "disabled";
};
};
gphy-xrx200 {
compatible = "lantiq,phy-xrx200";
firmware1 = "lantiq/xrx200_phy22f_a14.bin"; /*VR9 1.1*/
firmware2 = "lantiq/xrx200_phy22f_a22.bin"; /*VR9 1.2*/
phys = [ 00 01 ];
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
gpio-leds {
compatible = "gpio-leds";
dsl: dsl {
label = "vgv7510kw22:green:dsl";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
internet_red {
label = "vgv7510kw22:red:internet";
gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
};
info_red {
label = "vgv7510kw22:red:info";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
power_green: power {
label = "vgv7510kw22:green:power";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
info_green {
label = "vgv7510kw22:green:info";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
internet_green: internet_green {
label = "vgv7510kw22:green:internet";
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
wifi: wifi {
label = "vgv7510kw22:green:wlan";
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
};
power_red: power2 {
label = "vgv7510kw22:red:power";
gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
};
phone {
label = "vgv7510kw22:green:telefon";
gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
};
};
};
&pci0 {
status = "okay";
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
wifi@1814,3592 {
compatible = "pci1814,3592";
reg = <0x7000 0 0 0 0>;
ralink,mtd-eeprom = <&boardconfig 0x410>;
ralink,mtd-eeprom-swap;
mtd-mac-address = <&boardconfig 0x16>;
mtd-mac-address-increment = <1>;
};
};
&eth0 {
lan: interface@0 {
compatible = "lantiq,xrx200-pdi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
mtd-mac-address = <&boardconfig 0x16>;
lantiq,switch;
ethernet@0 {
compatible = "lantiq,xrx200-pdi-port";
reg = <0>;
phy-mode = "mii";
phy-handle = <&phy1>;
};
ethernet@2 {
compatible = "lantiq,xrx200-pdi-port";
reg = <2>;
phy-mode = "mii";
phy-handle = <&phy11>;
};
ethernet@3 {
compatible = "lantiq,xrx200-pdi-port";
reg = <3>;
phy-mode = "mii";
phy-handle = <&phy12>;
};
ethernet@4 {
compatible = "lantiq,xrx200-pdi-port";
reg = <4>;
phy-mode = "mii";
phy-handle = <&phy13>;
};
ethernet@5 {
compatible = "lantiq,xrx200-pdi-port";
reg = <5>;
phy-mode = "mii";
phy-handle = <&phy14>;
};
};
mdio@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,xrx200-mdio";
phy1: ethernet-phy@1 {
reg = <0x1>;
compatible = "ethernet-phy-ieee802.3-c22";
};
phy11: ethernet-phy@11 {
reg = <0x11>;
compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
};
phy12: ethernet-phy@12 {
reg = <0x12>;
compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
};
phy13: ethernet-phy@13 {
reg = <0x13>;
compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
};
phy14: ethernet-phy@14 {
reg = <0x14>;
compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
};
};
};

View file

@ -1,67 +0,0 @@
/dts-v1/;
#include "VGV7510KW22.dtsi"
/ {
compatible = "arcadyan,vgv7510kw22-brn", "arcadyan,vgv7510kw22", "lantiq,xway", "lantiq,vr9";
model = "o2 Box 6431";
sram@1F000000 {
cgu@103000 {
lantiq,phy-clk-src = <0x2>;
};
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
partitions {
partition@0 {
label = "Boot";
reg = <0x00000 0x40000>;
read-only;
};
partition@40000 {
label = "Configuration";
reg = <0x40000 0x40000>;
read-only;
};
partition@80000 {
label = "Certificate";
reg = <0x80000 0x20000>;
read-only;
};
partition@a0000 {
label = "Special_Area";
reg = <0xa0000 0x20000>;
read-only;
};
partition@c0000 {
compatible = "brnboot,root-selector";
label = "Primary_Setting";
reg = <0xc0000 0x20000>;
read-only;
};
partition@e0000 {
label = "Code_Image_0";
reg = <0xe0000 0x780000>;
brnboot,root-id = <0x00>;
read-only;
};
partition@860000 {
label = "Code_Image_1";
reg = <0x860000 0x780000>;
brnboot,root-id = <0x01>;
read-only;
};
};
};
};
};
};

View file

@ -1,33 +0,0 @@
/dts-v1/;
#include "VGV7510KW22.dtsi"
/ {
compatible = "arcadyan,vgv7510kw22-nor", "arcadyan,vgv7510kw22", "lantiq,xway", "lantiq,vr9";
model = "o2 Box 6431";
fpi@10000000 {
localbus@0 {
nor-boot@0 {
partitions {
partition@0 {
label = "uboot";
reg = <0x0 0x60000>; /* 384 KiB */
read-only;
};
partition@60000 {
label = "uboot-env";
reg = <0x60000 0x20000>; /* 128 KiB */
read-only;
};
partition@80000 {
label = "firmware";
reg = <0x80000 0xf60000>; /* 15744 KiB */
};
};
};
};
};
};

View file

@ -1,298 +0,0 @@
#include "vr9.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "arcadyan,vgv7519", "lantiq,xway", "lantiq,vr9";
chosen {
bootargs = "console=ttyLTQ0,115200 mem=62M vpe1_load_addr=0x83e00000 vpe1_mem=2M maxvpes=1 maxtcs=1 nosmp";
};
aliases {
led-boot = &power_green;
led-failsafe = &power_red;
led-running = &power_green;
led-dsl = &broadband_green;
led-internet = &internet_green;
led-wifi = &wireless_green;
};
sram@1F000000 {
vmmc@107000 {
status = "okay";
gpios = <&gpio 30 GPIO_ACTIVE_HIGH //fxs relay
&gpio 31 GPIO_ACTIVE_HIGH //still unknown
&gpio 3 GPIO_ACTIVE_HIGH>; //reset_slic?
};
};
memory@0 {
reg = <0x0 0x4000000>;
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x800000>, <1 0x800000 0x800000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
boardconfig: partition@40000 {
label = "board_config";
reg = <0x40000 0x10000>;
read-only;
};
};
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
stp {
lantiq,groups = "stp";
lantiq,function = "stp";
lantiq,open-drain = <0>;
lantiq,output = <1>;
lantiq,pull = <0>;
};
mdio {
lantiq,groups = "mdio";
lantiq,function = "mdio";
};
pci-rst {
lantiq,pins = "io21";
lantiq,open-drain = <0>;
lantiq,pull = <0>;
lantiq,output = <1>;
};
gphy-leds {
lantiq,groups = "gphy0 led1", "gphy1 led0";
lantiq,function = "gphy";
lantiq,open-drain = <0>;
lantiq,pull = <0>;
lantiq,output = <1>;
};
};
};
stp: stp@E100BB0 {
compatible = "lantiq,gpio-stp-xway";
reg = <0xE100BB0 0x40>;
#gpio-cells = <2>;
gpio-controller;
lantiq,shadow = <0xffff>;
lantiq,groups = <0x3>;
lantiq,dsl = <0x0>;
lantiq,phy1 = <0x0>;
lantiq,phy2 = <0x0>;
/* lantiq,rising; */
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
lantiq,portmask = <0x3>;
};
ifxhcd@E106000 {
status = "okay";
gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
};
pcie@d900000 {
status = "disabled";
};
};
gphy-xrx200 {
compatible = "lantiq,phy-xrx200";
firmware1 = "lantiq/xrx200_phy11g_a14.bin"; /*VR9 1.1*/
firmware2 = "lantiq/xrx200_phy11g_a22.bin"; /*VR9 1.2*/
phys = [ 00 01 ];
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
eco {
label = "eco";
gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
rfkill {
label = "rfkill";
gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
wps {
label = "wps";
gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
gpio-leds {
compatible = "gpio-leds";
eco {
label = "vgv7519:blue:eco";
gpios = <&stp 2 GPIO_ACTIVE_LOW>;
};
wps_red {
label = "vgv7519:red:wps";
gpios = <&stp 3 GPIO_ACTIVE_LOW>;
};
wps_green {
label = "vgv7519:green:wps";
gpios = <&stp 4 GPIO_ACTIVE_LOW>;
};
upgrade {
label = "vgv7519:blue:upgrade";
gpios = <&stp 5 GPIO_ACTIVE_LOW>;
};
tv {
label = "vgv7519:green:tv";
gpios = <&stp 6 GPIO_ACTIVE_LOW>;
};
internet_green: internet_green {
label = "vgv7519:green:internet";
gpios = <&stp 7 GPIO_ACTIVE_LOW>;
};
internet_red {
label = "vgv7519:red:internet";
gpios = <&stp 8 GPIO_ACTIVE_LOW>;
};
broadband_red {
label = "vgv7519:red:broadband";
gpios = <&stp 9 GPIO_ACTIVE_LOW>;
};
broadband_green: broadband_green {
label = "vgv7519:green:broadband";
gpios = <&stp 10 GPIO_ACTIVE_LOW>;
};
voice {
label = "vgv7519:green:voice";
gpios = <&stp 11 GPIO_ACTIVE_LOW>;
};
wireless_red {
label = "vgv7519:red:wireless";
gpios = <&stp 12 GPIO_ACTIVE_LOW>;
};
wireless_green: wireless_green {
label = "vgv7519:green:wireless";
gpios = <&stp 13 GPIO_ACTIVE_LOW>;
};
power_green: power2 {
label = "vgv7519:green:power";
gpios = <&stp 14 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
power_red: power {
label = "vgv7519:red:power";
gpios = <&stp 15 GPIO_ACTIVE_LOW>;
};
};
};
&pci0 {
status = "okay";
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
wifi@1814,3091 {
compatible = "pci1814,3091";
reg = <0x7000 0 0 0 0>;
ralink,mtd-eeprom = <&boardconfig 0x410>;
ralink,mtd-eeprom-swap;
mtd-mac-address = <&boardconfig 0x16>;
mtd-mac-address-increment = <1>;
};
};
&eth0 {
lan: interface@0 {
compatible = "lantiq,xrx200-pdi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
mtd-mac-address = <&boardconfig 0x16>;
mtd-mac-address-increment = <1>;
lantiq,switch;
ethernet@0 {
compatible = "lantiq,xrx200-pdi-port";
reg = <0>;
phy-mode = "rgmii";
phy-handle = <&phy0>;
};
ethernet@1 {
compatible = "lantiq,xrx200-pdi-port";
reg = <1>;
phy-mode = "rgmii";
phy-handle = <&phy1>;
};
ethernet@2 {
compatible = "lantiq,xrx200-pdi-port";
reg = <2>;
phy-mode = "gmii";
phy-handle = <&phy11>;
};
ethernet@4 {
compatible = "lantiq,xrx200-pdi-port";
reg = <4>;
phy-mode = "gmii";
phy-handle = <&phy13>;
};
ethernet@5 {
compatible = "lantiq,xrx200-pdi-port";
reg = <5>;
phy-mode = "rgmii";
phy-handle = <&phy5>;
};
};
mdio@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,xrx200-mdio";
phy0: ethernet-phy@0 {
reg = <0x0>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy1: ethernet-phy@1 {
reg = <0x1>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy5: ethernet-phy@5 {
reg = <0x5>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy11: ethernet-phy@11 {
reg = <0x11>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy13: ethernet-phy@13 {
reg = <0x13>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
};
};

View file

@ -1,73 +0,0 @@
/dts-v1/;
#include "VGV7519.dtsi"
/ {
compatible = "arcadyan,vgv7519-brn", "arcadyan,vgv7519", "lantiq,xway", "lantiq,vr9";
model = "KPN Experiabox V8";
fpi@10000000 {
localbus@0 {
nor-boot@0 {
partitions {
partition@0 {
label = "Boot";
reg = <0x00000 0x40000>;
read-only;
};
partition@50000 {
label = "Certificate";
reg = <0x50000 0x10000>;
read-only;
};
partition@60000 {
label = "Special_Area";
reg = <0x60000 0x10000>;
read-only;
};
partition@70000 {
label = " Reserve_0";
reg = <0x70000 0x10000>;
read-only;
};
partition@80000 {
label = "Code_Image_0";
reg = <0x80000 0x780000>;
brnboot,root-id = <0x00>;
read-only;
};
partition@4000000 {
compatible = "brnboot,root-selector";
label = "Primary_Setting";
reg = <0x4000000 0x10000>;
read-only;
};
partition@4010000 {
label = "Configuration";
reg = <0x4010000 0x60000>;
read-only;
};
partition@4070000 {
label = " Reserve_1";
reg = <0x4070000 0x10000>;
read-only;
};
partition@4080000 {
label = "Code_Image_1";
reg = <0x4080000 0x780000>;
brnboot,root-id = <0x01>;
read-only;
};
};
};
};
};
};

View file

@ -1,32 +0,0 @@
/dts-v1/;
#include "VGV7519.dtsi"
/ {
compatible = "arcadyan,vgv7519-nor", "arcadyan,vgv7519", "lantiq,xway", "lantiq,vr9";
model = "KPN Experiabox V8";
fpi@10000000 {
localbus@0 {
nor-boot@0 {
partitions {
partition@0 {
label = "uboot";
reg = <0x00000 0x40000>;
read-only;
};
partition@60000 {
label = "uboot_env";
reg = <0x60000 0x10000>;
read-only;
};
partition@80000 {
label = "firmware";
reg = <0x80000 0xf80000>;
};
};
};
};
};
};

View file

@ -1,283 +0,0 @@
/dts-v1/;
#include "vr9.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "tplink,vr200v", "lantiq,xway", "lantiq,vr9";
model = "TP-LINK Archer VR200v";
chosen {
bootargs = "console=ttyLTQ0,115200";
};
aliases {
led-boot = &power;
led-failsafe = &power;
led-dsl = &dsl;
led-internet = &internet;
led-usb = &usb;
led-usb2 = &usb;
};
memory@0 {
reg = <0x0 0x7f00000>;
};
fpi@10000000 {
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
mdio {
lantiq,groups = "mdio";
lantiq,function = "mdio";
};
gphy-leds {
lantiq,groups = "gphy0 led1", "gphy1 led1";
lantiq,function = "gphy";
lantiq,pull = <2>;
lantiq,open-drain = <0>;
lantiq,output = <1>;
};
phy-rst {
lantiq,pins = "io42";
lantiq,pull = <0>;
lantiq,open-drain = <0>;
lantiq,output = <1>;
};
pcie-rst {
lantiq,pins = "io38";
lantiq,pull = <0>;
lantiq,output = <1>;
};
};
pins_spi_default: pins_spi_default {
spi_in {
lantiq,groups = "spi_di";
lantiq,function = "spi";
};
spi_out {
lantiq,groups = "spi_do", "spi_clk",
"spi_cs4";
lantiq,function = "spi";
lantiq,output = <1>;
};
};
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
lantiq,portmask = <0x3>;
};
ifxhcd@E106000 {
status = "okay";
gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
};
pci0: pci@E105400 {
status = "okay";
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
};
};
gphy-xrx200 {
compatible = "lantiq,phy-xrx200";
firmware = "lantiq/xrx200_phy11g_a22.bin";
phys = [ 00 01 ];
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wifi {
label = "wifi";
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_RFKILL>;
linux,input-type = <EV_SW>;
};
wps {
label = "wps";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
dect_paging {
label = "dect_paging";
gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PHONE>;
};
};
gpio-leds {
compatible = "gpio-leds";
power: power {
label = "vr200v:blue:power";
gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
};
dsl: dsl {
label = "vr200v:blue:dsl";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
internet: internet {
label = "vr200v:blue:internet";
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
};
usb: usb {
label = "vr200v:blue:usb";
gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
};
eth {
label = "vr200v:blue:lan";
gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
};
wlan {
label = "vr200v:blue:wlan";
gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
};
wlan5g {
label = "vr200v:blue:wlan5g";
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
};
phone {
label = "vr200v:blue:phone";
gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
};
};
};
&spi {
pinctrl-names = "default";
pinctrl-0 = <&pins_spi_default>;
status = "ok";
m25p80@4 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <4 0>;
spi-max-frequency = <33250000>;
m25p,fast-read;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
reg = <0x0 0x20000>;
label = "u-boot";
read-only;
};
partition@20000 {
reg = <0x20000 0xf90000>;
label = "firmware";
};
partition@fb0000 {
reg = <0xfb0000 0x10000>;
label = "radioDECT";
read-only;
};
partition@fc0000 {
reg = <0xfc0000 0x10000>;
label = "config";
read-only;
};
romfile: partition@fd0000 {
reg = <0xfd0000 0x10000>;
label = "romfile";
read-only;
};
partition@fe0000 {
reg = <0xfe0000 0x10000>;
label = "rom";
read-only;
};
partition@ff0000 {
reg = <0xff0000 0x10000>;
label = "radio";
read-only;
};
};
};
};
&eth0 {
lan: interface@0 {
compatible = "lantiq,xrx200-pdi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
mtd-mac-address = <&romfile 0xf100>;
lantiq,switch;
ethernet@0 {
compatible = "lantiq,xrx200-pdi-port";
reg = <0>;
phy-mode = "rgmii";
phy-handle = <&phy0>;
// gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
};
ethernet@5 {
compatible = "lantiq,xrx200-pdi-port";
reg = <5>;
phy-mode = "rgmii";
phy-handle = <&phy5>;
};
ethernet@2 {
compatible = "lantiq,xrx200-pdi-port";
reg = <2>;
phy-mode = "gmii";
phy-handle = <&phy11>;
};
ethernet@3 {
compatible = "lantiq,xrx200-pdi-port";
reg = <4>;
phy-mode = "gmii";
phy-handle = <&phy13>;
};
};
mdio@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,xrx200-mdio";
phy0: ethernet-phy@0 {
reg = <0x0>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy5: ethernet-phy@5 {
reg = <0x5>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy11: ethernet-phy@11 {
reg = <0x11>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy13: ethernet-phy@13 {
reg = <0x13>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
};
};

View file

@ -1,185 +0,0 @@
/dts-v1/;
#include "ar9.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "buffalo,wbmr-hp-g300h", "lantiq,xway", "lantiq,ar9";
model = "Buffalo WBMR-HP-G300H";
chosen {
bootargs = "console=ttyLTQ0,115200";
};
aliases {
led-boot = &power_green;
led-failsafe = &power_red;
led-running = &power_green;
led-dsl = &dsl;
led-internet = &online_green;
led-usb = &usb;
led-wifi = &wifi;
};
memory@0 {
reg = <0x0 0x4000000>;
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x40000>;
read-only;
};
partition@40000 {
label = "uboot_env";
reg = <0x40000 0x20000>;
read-only;
};
partition@20000 {
label = "firmware";
reg = <0x60000 0x1f20000>;
};
boardconfig: partition@1fc0000 {
label = "board";
reg = <0x1fc0000 0x20000>;
read-only;
};
partition@1fe0000 {
label = "calibration";
reg = <0x1fe0000 0x20000>;
read-only;
};
};
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
pci-in {
lantiq,groups = "req1";
lantiq,output = <0>;
lantiq,open-drain = <1>;
lantiq,pull = <2>;
};
pci-out {
lantiq,groups = "gnt1";
lantiq,output = <1>;
lantiq,pull = <0>;
};
pci_rst {
lantiq,pins = "io21";
lantiq,pull = <0>;
lantiq,output = <1>;
};
};
};
etop@E180000 {
phy-mode = "rgmii";
mtd-mac-address = <&boardconfig 0x10024>;
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
};
pci@E105400 {
status = "okay";
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
wps {
label = "wps";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
reset {
label = "reset";
gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
eject {
label = "eject";
gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
linux,code = <KEY_EJECTCD>;
};
movie {
label = "movie";
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VIDEO>;
};
};
gpio-leds {
compatible = "gpio-leds";
power_green: power {
label = "wbmr:green:power";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
power_red: power2 {
label = "wbmr:red:power";
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
};
security {
label = "wbmr:yellow:security";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
wifi: wifi {
label = "wbmr:green:wireless";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
dsl: dsl {
label = "wbmr:green:dsl";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
online_green: online {
label = "wbmr:green:internet";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
online2 {
label = "wbmr:red:internet";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
};
movie {
label = "wbmr:blue:movie";
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
};
usb: usb {
label = "wbmr:green:usb";
gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
default-state = "on";
};
};
};

View file

@ -1,306 +0,0 @@
/dts-v1/;
#include "vr9.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "buffalo,wbmr-300hpd", "lantiq,xway", "lantiq,vr9";
model = "Buffalo WBMR-300HPD";
chosen {
bootargs = "console=ttyLTQ0,115200";
};
aliases {
led-boot = &power_g;
led-failsafe = &diag_r;
led-running = &power_g;
led-dsl = &dsl;
led-internet = &router_g;
led-wifi = &wifi_g;
};
memory@0 {
reg = <0x0 0x4000000>;
};
fpi@10000000 {
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
mdio {
lantiq,groups = "mdio";
lantiq,function = "mdio";
};
phy-rst {
lantiq,pins = "io42";
lantiq,pull = <0>;
lantiq,open-drain = <0>;
lantiq,output = <1>;
};
pcie-rst {
lantiq,pins = "io38";
lantiq,pull = <0>;
lantiq,output = <1>;
};
};
pins_spi_default: pins_spi_default {
spi_in {
lantiq,groups = "spi_di";
lantiq,function = "spi";
};
spi_out {
lantiq,groups = "spi_do", "spi_clk",
"spi_cs4";
lantiq,function = "spi";
lantiq,output = <1>;
};
};
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
lantiq,portmask = <0x3>;
};
ifxhcd@E106000 {
status = "okay";
gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
};
};
gphy-xrx200 {
compatible = "lantiq,phy-xrx200";
firmware = "lantiq/xrx200_phy22f_a22.bin";
phys = [ 00 01 ];
};
gpio_poweroff {
compatible = "gpio-poweroff";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
power {
label = "power";
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
};
reset {
label = "reset";
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
auto {
label = "auto";
gpios = <&gpio 48 GPIO_ACTIVE_HIGH>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
};
router {
label = "router";
gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
linux,code = <BTN_1>;
linux,input-type = <EV_SW>;
};
};
gpio-leds {
compatible = "gpio-leds";
diag_r: diag_r {
label = "wbmr300:red:diag";
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
default_state = "off";
};
wifi_g: wifi_g {
label = "wbmr300:green:wifi";
gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
};
dsl: dsl {
label = "dsl";
gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
};
router_y: router_y {
label = "wbmr300:yellow:router";
gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
};
wifi_y: wifi_y {
label = "wbmr300:yellow:wifi";
gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
};
lan1: lan1 {
label = "wbmr300:green:lan1";
gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
};
wan: wan {
label = "wbmr300:green:wan";
gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
};
lan3: lan3 {
label = "wbmr300:green:lan3";
gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
};
lan2: lan2 {
label = "wbmr300:green:lan2";
gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
};
internet_g: internet_g {
label = "wbmr300:green:internet";
gpios = <&gpio 34 GPIO_ACTIVE_HIGH>;
};
internet_y: internet_y {
label = "wbmr300:yellow:internet";
gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
};
router_g: router_g {
label = "wbmr300:green:router";
gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
};
power_g: power_g {
label = "wbmr300:green:power";
gpios = <&gpio 49 GPIO_ACTIVE_HIGH>;
};
};
};
&spi {
pinctrl-names = "default";
pinctrl-0 = <&pins_spi_default>;
status = "ok";
m25p80@4 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <4 0>;
spi-max-frequency = <20000000>;
partition@0 {
reg = <0x0 0x10000>;
label = "u-boot";
read-only;
};
partition@10000 {
reg = <0x10000 0x10000>;
label = "gphyfirmware";
read-only;
};
partition@20000 {
reg = <0x20000 0x80000>;
label = "dsl_fw";
};
partition@de0000 {
reg = <0xa0000 0xf40000>;
label = "firmware";
};
partition@fe0000 {
reg = <0xfe0000 0x10000>;
label = "sysconfig";
read-only;
};
partition@ff0000 {
reg = <0xff0000 0x2000>;
label = "ubootconfig";
};
partition@ff3000 {
reg = <0xff3000 0x2000>;
label = "board_config";
read-only;
};
};
};
&eth0 {
lan: interface@0 {
compatible = "lantiq,xrx200-pdi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
lantiq,switch;
ethernet@1 {
compatible = "lantiq,xrx200-pdi-port";
reg = <4>;
phy-mode = "mii";
phy-handle = <&phy13>;
};
ethernet@2 {
compatible = "lantiq,xrx200-pdi-port";
reg = <5>;
phy-mode = "mii";
phy-handle = <&phy14>;
};
ethernet@3 {
compatible = "lantiq,xrx200-pdi-port";
reg = <2>;
phy-mode = "mii";
phy-handle = <&phy11>;
};
ethernet@4 {
compatible = "lantiq,xrx200-pdi-port";
reg = <3>;
phy-mode = "mii";
phy-handle = <&phy12>;
};
};
mdio@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,xrx200-mdio";
phy11: ethernet-phy@11 {
reg = <0x11>;
compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
};
phy12: ethernet-phy@12 {
reg = <0x12>;
compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
};
phy13: ethernet-phy@13 {
reg = <0x13>;
compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
};
phy14: ethernet-phy@14 {
reg = <0x14>;
compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
};
};
};

View file

@ -1,174 +0,0 @@
#include <dt-bindings/gpio/gpio.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,xway", "lantiq,ase";
aliases {
serial0 = &asc1;
};
chosen {
stdout-path = "serial0:115200n8";
};
cpus {
cpu@0 {
compatible = "mips,mips4Kc";
};
};
memory@0 {
device_type = "memory";
};
biu@1F800000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,biu", "simple-bus";
reg = <0x1F800000 0x800000>;
ranges = <0x0 0x1F800000 0x7FFFFF>;
icu0: icu@80200 {
#interrupt-cells = <1>;
interrupt-controller;
compatible = "lantiq,icu";
reg = <0x80200 0x28
0x80228 0x28
0x80250 0x28
0x80278 0x28
0x802a0 0x28>;
};
watchdog@803F0 {
compatible = "lantiq,wdt";
reg = <0x803F0 0x10>;
};
};
sram@1F000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,sram", "simple-bus";
reg = <0x1F000000 0x800000>;
ranges = <0x0 0x1F000000 0x7FFFFF>;
eiu0: eiu@101000 {
#interrupt-cells = <1>;
interrupt-controller;
compatible = "lantiq,eiu-xway";
reg = <0x101000 0x1000>;
interrupt-parent = <&icu0>;
lantiq,eiu-irqs = <29 30 31>;
};
pmu0: pmu@102000 {
compatible = "lantiq,pmu-xway";
reg = <0x102000 0x1000>;
};
cgu0: cgu@103000 {
compatible = "lantiq,cgu-xway";
reg = <0x103000 0x1000>;
#clock-cells = <1>;
};
rcu0: rcu@203000 {
compatible = "lantiq,rcu-xway";
reg = <0x203000 0x1000>;
};
};
fpi@10000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,fpi", "simple-bus";
ranges = <0x0 0x10000000 0xEEFFFFF>;
reg = <0x10000000 0xEF00000>;
localbus@0 {
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
1 0 0x4000000 0x4000010>; /* addsel1 */
compatible = "lantiq,localbus", "simple-bus";
};
spi@E100800 {
compatible = "lantiq,ase-spi";
reg = <0xE100800 0x100>;
interrupt-parent = <&icu0>;
interrupts = <24 25 26>;
interrupt-names = "spi_rx", "spi_tx", "spi_err",
"spi_frm";
#address-cells = <1>;
#size-cells = <1>;
status = "disabled";
};
gptu@E100A00 {
compatible = "lantiq,gptu-xway";
reg = <0xE100A00 0x100>;
interrupt-parent = <&icu0>;
interrupts = <33 34 35 36 37 38>;
};
gpio: pinmux@E100B10 {
compatible = "lantiq,ase-pinctrl";
#gpio-cells = <2>;
gpio-controller;
reg = <0xE100B10 0xA0>;
};
asc1: serial@E100C00 {
compatible = "lantiq,asc";
reg = <0xE100C00 0x400>;
interrupt-parent = <&icu0>;
interrupts = <72 74 75>;
};
mei@E116000 {
compatible = "lantiq,mei-xway";
interrupt-parent = <&icu0>;
interrupts = <81>;
};
ifxhcd@E101000 {
compatible = "lantiq,ase-usb", "lantiq,ifxhcd-ase";
reg = <0xE101000 0x1000
0xE120000 0x3f000>;
interrupt-parent = <&icu0>;
interrupts = <39>;
dr_mode = "host";
status = "disabled";
};
dma0: dma@E104100 {
compatible = "lantiq,dma-xway";
reg = <0xE104100 0x800>;
};
ebu0: ebu@E105300 {
compatible = "lantiq,ebu-xway";
reg = <0xE105300 0x100>;
};
ppe@E234000 {
compatible = "lantiq,ppe-ase";
interrupt-parent = <&icu0>;
interrupts = <85>;
};
etop@E180000 {
compatible = "lantiq,etop-xway";
reg = <0xE180000 0x40000>;
interrupt-parent = <&icu0>;
interrupts = <105 109>;
};
};
adsl {
compatible = "lantiq,adsl-ase";
};
};

View file

@ -1,216 +0,0 @@
#include <dt-bindings/gpio/gpio.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,xway", "lantiq,ar9";
aliases {
serial0 = &asc1;
};
chosen {
stdout-path = "serial0:115200n8";
};
cpus {
cpu@0 {
compatible = "mips,mips34K";
};
};
memory@0 {
device_type = "memory";
};
biu@1F800000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,biu", "simple-bus";
reg = <0x1F800000 0x800000>;
ranges = <0x0 0x1F800000 0x7FFFFF>;
icu0: icu@80200 {
#interrupt-cells = <1>;
interrupt-controller;
compatible = "lantiq,icu";
reg = <0x80200 0x28
0x80228 0x28
0x80250 0x28
0x80278 0x28
0x802a0 0x28>;
};
watchdog@803F0 {
compatible = "lantiq,wdt";
reg = <0x803F0 0x10>;
};
};
sram@1F000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,sram", "simple-bus";
reg = <0x1F000000 0x800000>;
ranges = <0x0 0x1F000000 0x7FFFFF>;
eiu0: eiu@101000 {
#interrupt-cells = <1>;
interrupt-controller;
compatible = "lantiq,eiu-xway";
reg = <0x101000 0x1000>;
interrupt-parent = <&icu0>;
lantiq,eiu-irqs = <166 135 66 40 41 42>;
};
pmu0: pmu@102000 {
compatible = "lantiq,pmu-xway";
reg = <0x102000 0x1000>;
};
cgu0: cgu@103000 {
compatible = "lantiq,cgu-xway";
reg = <0x103000 0x1000>;
#clock-cells = <1>;
};
rcu0: rcu@203000 {
compatible = "lantiq,rcu-xway";
reg = <0x203000 0x1000>;
};
};
fpi@10000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,fpi", "simple-bus";
ranges = <0x0 0x10000000 0xEEFFFFF>;
reg = <0x10000000 0xEF00000>;
localbus@0 {
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
1 0 0x4000000 0x4000010>; /* addsel1 */
compatible = "lantiq,localbus", "simple-bus";
};
gptu@E100A00 {
compatible = "lantiq,gptu-xway";
reg = <0xE100A00 0x100>;
interrupt-parent = <&icu0>;
interrupts = <126 127 128 129 130 131>;
};
asc0: serial@E100400 {
compatible = "lantiq,asc";
reg = <0xE100400 0x400>;
interrupt-parent = <&icu0>;
interrupts = <104 105 106>;
status = "disabled";
};
spi: spi@E100800 {
compatible = "lantiq,xrx100-spi";
reg = <0xE100800 0x100>;
interrupt-parent = <&icu0>;
interrupts = <22 23 24>;
interrupt-names = "spi_rx", "spi_tx", "spi_err",
"spi_frm";
#address-cells = <1>;
#size-cells = <1>;
status = "disabled";
};
gpio: pinmux@E100B10 {
compatible = "lantiq,xrx100-pinctrl";
#gpio-cells = <2>;
gpio-controller;
reg = <0xE100B10 0xA0>;
};
asc1: serial@E100C00 {
compatible = "lantiq,asc";
reg = <0xE100C00 0x400>;
interrupt-parent = <&icu0>;
interrupts = <112 113 114>;
};
ifxhcd@E101000 {
compatible = "lantiq,arx100-usb", "lantiq,ifxhcd-arx100";
reg = <0xE101000 0x1000
0xE120000 0x3f000>;
interrupt-parent = <&icu0>;
interrupts = <62 91>;
dr_mode = "host";
status = "disabled";
};
ifxhcd@E106000 {
compatible = "lantiq,arx100-usb";
reg = <0xE106000 0x1000
0xE1E0000 0x3f000>;
interrupt-parent = <&icu0>;
interrupts = <91>;
dr_mode = "host";
status = "disabled";
};
deu@E103100 {
compatible = "lantiq,deu-arx100";
reg = <0xE103100 0xf00>;
};
dma0: dma@E104100 {
compatible = "lantiq,dma-xway";
reg = <0xE104100 0x800>;
};
ebu0: ebu@E105300 {
compatible = "lantiq,ebu-xway";
reg = <0xE105300 0x100>;
};
mei@E116000 {
compatible = "lantiq,mei-xway";
interrupt-parent = <&icu0>;
interrupts = <63>;
};
etop@E180000 {
compatible = "lantiq,etop-xway";
reg = <0xE180000 0x40000
0xE108000 0x200>;
interrupt-parent = <&icu0>;
interrupts = <73 72>;
mac-address = [ 00 11 22 33 44 55 ];
};
ppe@E234000 {
compatible = "lantiq,ppe-arx100";
interrupt-parent = <&icu0>;
interrupts = <96>;
};
pci0: pci@E105400 {
status = "disabled";
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
compatible = "lantiq,pci-xway";
bus-range = <0x0 0x0>;
ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */
0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
reg = <0x7000000 0x8000 /* config space */
0xE105400 0x400>; /* pci bridge */
lantiq,bus-clock = <33333333>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <0x7000 0 0 1 &icu0 30 1>;
req-mask = <0x1>;
};
};
adsl {
compatible = "lantiq,adsl-arx100";
};
};

View file

@ -1,212 +0,0 @@
#include <dt-bindings/gpio/gpio.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,xway", "lantiq,danube";
aliases {
serial0 = &asc1;
};
chosen {
stdout-path = "serial0:115200n8";
};
cpus {
cpu@0 {
compatible = "mips,mips24Kc";
};
};
memory@0 {
device_type = "memory";
};
biu@1F800000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,biu", "simple-bus";
reg = <0x1F800000 0x800000>;
ranges = <0x0 0x1F800000 0x7FFFFF>;
icu0: icu@80200 {
#interrupt-cells = <1>;
interrupt-controller;
compatible = "lantiq,icu";
reg = <0x80200 0x28
0x80228 0x28
0x80250 0x28
0x80278 0x28
0x802a0 0x28>;
};
watchdog@803F0 {
compatible = "lantiq,wdt";
reg = <0x803F0 0x10>;
};
};
sram@1F000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,sram", "simple-bus";
reg = <0x1F000000 0x800000>;
ranges = <0x0 0x1F000000 0x7FFFFF>;
eiu0: eiu@101000 {
#interrupt-cells = <1>;
interrupt-controller;
compatible = "lantiq,eiu-xway";
reg = <0x101000 0x1000>;
interrupt-parent = <&icu0>;
lantiq,eiu-irqs = <166 135 66>;
};
pmu0: pmu@102000 {
compatible = "lantiq,pmu-xway";
reg = <0x102000 0x1000>;
};
cgu0: cgu@103000 {
compatible = "lantiq,cgu-xway";
reg = <0x103000 0x1000>;
#clock-cells = <1>;
};
vmmc@107000 {
status = "disabled";
compatible = "lantiq,vmmc-xway";
reg = <0x103000 0x400>;
interrupt-parent = <&icu0>;
interrupts = <150 151 152 153 154 155>;
};
rcu0: rcu@203000 {
compatible = "lantiq,rcu-xway";
reg = <0x203000 0x1000>;
};
};
fpi@10000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,fpi", "simple-bus";
ranges = <0x0 0x10000000 0xEEFFFFF>;
reg = <0x10000000 0xEF00000>;
localbus@0 {
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
1 0 0x4000000 0x4000010>; /* addsel1 */
compatible = "lantiq,localbus", "simple-bus";
};
gptu@E100A00 {
compatible = "lantiq,gptu-xway";
reg = <0xE100A00 0x100>;
interrupt-parent = <&icu0>;
interrupts = <126 127 128 129 130 131>;
};
gpios: stp@E100BB0 {
#gpio-cells = <2>;
compatible = "lantiq,gpio-stp-xway";
gpio-controller;
reg = <0xE100BB0 0x40>;
lantiq,shadow = <0xfff>;
lantiq,groups = <0x3>;
status = "disabled";
};
asc0: serial@E100400 {
compatible = "lantiq,asc";
reg = <0xE100400 0x400>;
interrupt-parent = <&icu0>;
interrupts = <104 105 106>;
status = "disabled";
};
gpio: pinmux@E100B10 {
compatible = "lantiq,danube-pinctrl";
#gpio-cells = <2>;
gpio-controller;
reg = <0xE100B10 0xA0>;
};
asc1: serial@E100C00 {
compatible = "lantiq,asc";
reg = <0xE100C00 0x400>;
interrupt-parent = <&icu0>;
interrupts = <112 113 114>;
};
ifxhcd@E101000 {
compatible = "lantiq,danube-usb", "lantiq,ifxhcd-danube";
reg = <0xE101000 0x1000
0xE120000 0x3f000>;
interrupt-parent = <&icu0>;
interrupts = <62>;
dr_mode = "host";
status = "disabled";
};
deu@E103100 {
compatible = "lantiq,deu-danube";
reg = <0xE103100 0xf00>;
};
dma0: dma@E104100 {
compatible = "lantiq,dma-xway";
reg = <0xE104100 0x800>;
};
ebu0: ebu@E105300 {
compatible = "lantiq,ebu-xway";
reg = <0xE105300 0x100>;
};
mei@E116000 {
compatible = "lantiq,mei-xway";
interrupt-parent = <&icu0>;
interrupts = <63>;
};
etop@E180000 {
compatible = "lantiq,etop-xway";
reg = <0xE180000 0x40000>;
interrupt-parent = <&icu0>;
interrupts = <73 78>;
mac-address = [ 00 11 22 33 44 55 ];
};
ppe@E234000 {
compatible = "lantiq,ppe-danube";
interrupt-parent = <&icu0>;
interrupts = <96>;
};
pci0: pci@E105400 {
status = "disabled";
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
compatible = "lantiq,pci-xway";
bus-range = <0x0 0x0>;
ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */
0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
reg = <0x7000000 0x8000 /* config space */
0xE105400 0x400>; /* pci bridge */
lantiq,bus-clock = <33333333>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <0x7000 0 0 1 &icu0 30 1>; /* slot 14, irq 30 */
req-mask = <0x1>; /* GNT1 */
};
};
adsl {
compatible = "lantiq,adsl-danube";
};
};

View file

@ -1,37 +0,0 @@
&ebu_cs0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,sflash-falcon", "simple-bus";
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spansion,s25fl129p0", "spansion,s25fl129p1";
reg = <0 0>;
linux,mtd-name = "sflash";
spi-max-frequency = <80000000>;
m25p,fast-read;
partition@0 {
reg = <0x0 0x40000>;
label = "uboot";
read-only;
};
partition@40000 {
reg = <0x40000 0x80000>;
label = "uboot_env";
};
partition@C0000 {
reg = <0xC0000 0x740000>;
label = "image0";
};
partition@800000 {
reg = <0x800000 0x800000>;
label = "image1";
};
};
};

View file

@ -1,392 +0,0 @@
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,falcon";
cpus {
cpu@0 {
compatible = "mips,mips34kc";
};
};
aliases {
serial0 = &serial0;
serial1 = &serial1;
gpio0 = &gpio0;
gpio1 = &gpio1;
gpio2 = &gpio2;
gpio3 = &gpio3;
gpio4 = &gpio4;
};
chosen {
stdout-path = "serial0:115200n8";
};
clocks {
compatible = "simple-bus";
cpu_clk: cpu {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <400000000>;
clock-output-names = "cpu";
};
io_clk: io {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <200000000>;
clock-output-names = "io";
};
fpi_clk: fpi {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <100000000>;
clock-output-names = "fpi";
};
};
ebu_cs0: localbus@10000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,localbus", "simple-bus";
reg = <0x10000000 0x4000000>;
ranges = <0x0 0x10000000 0x4000000>;
};
ebu_cs1: localbus@14000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,localbus", "simple-bus";
reg = <0x14000000 0x4000000>;
ranges = <0x0 0x14000000 0x4000000>;
};
ebu@18000000 {
compatible = "lantiq,ebu-falcon";
reg = <0x18000000 0x100>;
};
sbs2@1D000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,sysb2", "simple-bus";
reg = <0x1D000000 0x1000000>;
ranges = <0x0 0x1D000000 0x1000000>;
clock_sysgpe: clock-controller@700000 {
compatible = "lantiq,sysgpe-falcon";
reg = <0x700000 0x100>;
#clock-cells = <1>;
};
mps@4000 {
compatible = "lantiq,mps-falcon", "lantiq,mps-xrx100";
reg = <0x4000 0x1000>;
interrupt-parent = <&icu0>;
interrupts = <154 155>;
lantiq,mbx = <&mpsmbx>;
};
gpio0: gpio@810000 {
compatible = "lantiq,falcon-gpio";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&icu0>;
interrupts = <44>;
reg = <0x810000 0x80>;
clocks = <&clock_syseth 16>;
};
gpio2: gpio@810100 {
compatible = "lantiq,falcon-gpio";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&icu0>;
interrupts = <46>;
reg = <0x810100 0x80>;
clocks = <&clock_syseth 17>;
};
clock_syseth: clock-controller@B00000 {
compatible = "lantiq,syseth-falcon";
reg = <0xB00000 0x100>;
#clock-cells = <1>;
};
pad@B01000 {
compatible = "lantiq,pad-falcon";
reg = <0xB01000 0x100>;
lantiq,bank = <0>;
clocks = <&clock_syseth 20>;
};
pad@B02000 {
compatible = "lantiq,pad-falcon";
reg = <0xB02000 0x100>;
lantiq,bank = <2>;
clocks = <&clock_syseth 21>;
};
};
fpi@1E000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,fpi", "simple-bus";
reg = <0x1E000000 0x1000000>;
ranges = <0x0 0x1E000000 0x1000000>;
serial1: serial@100B00 {
status = "disabled";
compatible = "lantiq,asc";
reg = <0x100B00 0x100>;
interrupt-parent = <&icu0>;
interrupts = <112 113 114>;
line = <1>;
pinctrl-names = "default";
pinctrl-0 = <&asc1_pins>;
clocks = <&clock_sys1 11>;
};
serial0: serial@100C00 {
compatible = "lantiq,asc";
reg = <0x100C00 0x100>;
interrupt-parent = <&icu0>;
interrupts = <104 105 106>;
line = <0>;
pinctrl-names = "default";
pinctrl-0 = <&asc0_pins>;
clocks = <&clock_sys1 12>;
};
spi: spi@100D00 {
status = "disabled";
compatible = "lantiq,falcon-spi", "lantiq,xrx100-spi", "lantiq,spi-lantiq-ssc";
interrupts = <22 23 24 25>;
interrupt-names = "spi_tx", "spi_rx", "spi_err", "spi_frm";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x100D00 0x100>;
interrupt-parent = <&icu0>;
clocks = <&clock_sys1 13>;
base_cs = <1>;
num_cs = <2>;
};
gptc@100E00 {
compatible = "lantiq,gptc-falcon";
reg = <0x100E00 0x100>;
};
i2c: i2c@200000 {
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,lantiq-i2c";
reg = <0x200000 0x10000>;
interrupt-parent = <&icu0>;
interrupts = <18 19 20 21>;
gpios = <&gpio1 7 0 &gpio1 8 0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c_pins>;
clocks = <&clock_sys1 14>;
};
gpio1: gpio@800100 {
compatible = "lantiq,falcon-gpio";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&icu0>;
interrupts = <45>;
reg = <0x800100 0x100>;
clocks = <&clock_sys1 16>;
};
gpio3: gpio@800200 {
compatible = "lantiq,falcon-gpio";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&icu0>;
interrupts = <47>;
reg = <0x800200 0x100>;
clocks = <&clock_sys1 17>;
};
gpio4: gpio@800300 {
compatible = "lantiq,falcon-gpio";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&icu0>;
interrupts = <48>;
reg = <0x800300 0x100>;
clocks = <&clock_sys1 18>;
};
pad@800400 {
compatible = "lantiq,pad-falcon";
reg = <0x800400 0x100>;
lantiq,bank = <1>;
clocks = <&clock_sys1 20>;
};
pad@800500 {
compatible = "lantiq,pad-falcon";
reg = <0x800500 0x100>;
lantiq,bank = <3>;
clocks = <&clock_sys1 21>;
};
pad@800600 {
compatible = "lantiq,pad-falcon";
reg = <0x800600 0x100>;
lantiq,bank = <4>;
clocks = <&clock_sys1 22>;
};
status@802000 {
compatible = "lantiq,status-falcon";
reg = <0x802000 0x80>;
};
clock_sys1: clock-controller@F00000 {
compatible = "lantiq,sys1-falcon";
reg = <0xF00000 0x100>;
#clock-cells = <1>;
};
};
sbs0@1F000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
reg = <0x1F000000 0x400000>;
ranges = <0x0 0x1F000000 0x400000>;
mpsmbx: mpsmbx@200000 {
reg = <0x200000 0x200>;
};
};
sbs1@1F700000 {
};
biu@1F800000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,biu", "simple-bus";
reg = <0x1F800000 0x800000>;
ranges = <0x0 0x1F800000 0x800000>;
icu0: icu@80200 {
#interrupt-cells = <1>;
interrupt-controller;
compatible = "lantiq,icu";
reg = <0x80200 0x28
0x80228 0x28
0x80250 0x28
0x80278 0x28
0x802a0 0x28>;
};
watchdog@803F0 {
compatible = "lantiq,wdt";
reg = <0x803F0 0x10>;
clocks = <&io_clk>; /* currently no effect */
};
};
pinctrl {
compatible = "lantiq,pinctrl-falcon";
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinctrl0 {
/*ntr {
lantiq,groups = "ntr8k";
lantiq,function = "ntr";
};*/
hrst {
lantiq,groups = "hrst";
lantiq,function = "rst";
};
};
asc0_pins: asc0 {
asc0 {
lantiq,groups = "asc0";
lantiq,function = "asc";
};
};
asc1_pins: asc1 {
asc1 {
lantiq,groups = "asc1";
lantiq,function = "asc";
};
};
i2c_pins: i2c {
i2c {
lantiq,groups = "i2c";
lantiq,function = "i2c";
};
};
bootled_pins: bootled {
bootled {
lantiq,groups = "bootled";
lantiq,function = "led";
};
};
ntr_ntr8k: ntr8k {
ntr8k {
lantiq,groups = "ntr8k";
lantiq,function = "ntr";
};
};
ntr_pps: pps {
pps {
lantiq,groups = "pps";
lantiq,function = "ntr";
};
};
ntr_gpio: gpio {
gpio {
lantiq,pins = "io5";
lantiq,mux = <1>;
lantiq,output = <0>;
};
};
slic_pins: slic {
slic {
lantiq,groups = "slic";
lantiq,function = "slic";
};
};
};
pinselect-ntr {
compatible = "lantiq,onu-ntr","lantiq,pinselect-ntr";
pinctrl-names = "ntr8k", "pps", "gpio";
pinctrl-0 = <&ntr_ntr8k>;
pinctrl-1 = <&ntr_pps>;
pinctrl-2 = <&ntr_gpio>;
};
pinselect-asc1 {
compatible = "lantiq,onu-asc1","lantiq,pinselect-asc1";
pinctrl-names = "default", "asc1";
pinctrl-0 = <&slic_pins>;
pinctrl-1 = <&asc1_pins>;
};
};

View file

@ -1,260 +0,0 @@
#include <dt-bindings/gpio/gpio.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,xway", "lantiq,vr9";
aliases {
serial0 = &asc1;
};
chosen {
stdout-path = "serial0:115200n8";
};
cpus {
cpu@0 {
compatible = "mips,mips34Kc";
};
};
memory@0 {
device_type = "memory";
};
cputemp@0 {
compatible = "lantiq,cputemp";
};
biu@1F800000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,biu", "simple-bus";
reg = <0x1F800000 0x800000>;
ranges = <0x0 0x1F800000 0x7FFFFF>;
icu0: icu@80200 {
#interrupt-cells = <1>;
interrupt-controller;
compatible = "lantiq,icu";
reg = <0x80200 0x28
0x80228 0x28
0x80250 0x28
0x80278 0x28
0x802a0 0x28>;
};
watchdog@803F0 {
compatible = "lantiq,wdt";
reg = <0x803F0 0x10>;
};
};
sram@1F000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,sram", "simple-bus";
reg = <0x1F000000 0x800000>;
ranges = <0x0 0x1F000000 0x7FFFFF>;
eiu0: eiu@101000 {
#interrupt-cells = <1>;
interrupt-controller;
compatible = "lantiq,eiu-xway";
reg = <0x101000 0x1000>;
interrupt-parent = <&icu0>;
lantiq,eiu-irqs = <166 135 66 40 41 42>;
};
pmu0: pmu@102000 {
compatible = "lantiq,pmu-xway";
reg = <0x102000 0x1000>;
};
cgu0: cgu@103000 {
compatible = "lantiq,cgu-xway";
reg = <0x103000 0x1000>;
};
dcdc@106a00 {
compatible = "lantiq,dcdc-xrx200";
reg = <0x106a00 0x200>;
};
vmmc@107000 {
status = "disabled";
compatible = "lantiq,vmmc-xway";
reg = <0x103000 0x400>;
interrupt-parent = <&icu0>;
interrupts = <150 151 152 153 154 155>;
};
rcu0: rcu@203000 {
compatible = "lantiq,rcu-xrx200";
reg = <0x203000 0x1000>;
/* irq for thermal sensor */
interrupt-parent = <&icu0>;
interrupts = <115>;
};
xbar0: xbar@400000 {
compatible = "lantiq,xbar-xway";
reg = <0x400000 0x1000>;
};
};
fpi@10000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,fpi", "simple-bus";
ranges = <0x0 0x10000000 0xEEFFFFF>;
reg = <0x10000000 0xEF00000>;
localbus@0 {
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
1 0 0x4000000 0x4000010>; /* addsel1 */
compatible = "lantiq,localbus", "simple-bus";
};
gptu@E100A00 {
compatible = "lantiq,gptu-xway";
reg = <0xE100A00 0x100>;
interrupt-parent = <&icu0>;
interrupts = <126 127 128 129 130 131>;
};
usif: usif@da00000 {
compatible = "lantiq,usif";
reg = <0xda00000 0x1000000>;
interrupt-parent = <&icu0>;
interrupts = <29 125 107 108 109 110>;
status = "disabled";
};
spi: spi@E100800 {
compatible = "lantiq,xrx200-spi", "lantiq,xrx100-spi";
reg = <0xE100800 0x100>;
interrupt-parent = <&icu0>;
interrupts = <22 23 24>;
interrupt-names = "spi_rx", "spi_tx", "spi_err",
"spi_frm";
#address-cells = <1>;
#size-cells = <1>;
status = "disabled";
};
gpio: pinmux@E100B10 {
compatible = "lantiq,xrx200-pinctrl";
#gpio-cells = <2>;
gpio-controller;
reg = <0xE100B10 0xA0>;
};
asc1: serial@E100C00 {
compatible = "lantiq,asc";
reg = <0xE100C00 0x400>;
interrupt-parent = <&icu0>;
interrupts = <112 113 114>;
};
deu@E103100 {
compatible = "lantiq,deu-xrx200";
reg = <0xE103100 0xf00>;
};
dma0: dma@E104100 {
compatible = "lantiq,dma-xway";
reg = <0xE104100 0x800>;
};
ebu0: ebu@E105300 {
compatible = "lantiq,ebu-xway";
reg = <0xE105300 0x100>;
};
ifxhcd@E101000 {
status = "disabled";
compatible = "lantiq,xrx200-usb", "lantiq,ifxhcd-xrx200";
reg = <0xE101000 0x1000
0xE120000 0x3f000>;
interrupt-parent = <&icu0>;
interrupts = <62 91>;
dr_mode = "host";
};
ifxhcd@E106000 {
status = "disabled";
compatible = "lantiq,xrx200-usb";
reg = <0xE106000 0x1000>;
interrupt-parent = <&icu0>;
interrupts = <91>;
dr_mode = "host";
};
eth0: eth@E108000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,xrx200-net";
reg = < 0xE108000 0x3000 /* switch */
0xE10B100 0x70 /* mdio */
0xE10B1D8 0x30 /* mii */
0xE10B308 0x30 /* pmac */
>;
interrupt-parent = <&icu0>;
interrupts = <75 73 72>;
};
mei@E116000 {
compatible = "lantiq,mei-xrx200";
reg = <0xE116000 0x9c>;
interrupt-parent = <&icu0>;
interrupts = <63>;
};
ppe@E234000 {
compatible = "lantiq,ppe-xrx200";
interrupt-parent = <&icu0>;
interrupts = <96>;
};
pcie0: pcie@d900000 {
compatible = "lantiq,pcie-xrx200";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
interrupt-parent = <&icu0>;
interrupts = <161 144>;
device_type = "pci";
gpio-reset = <&gpio 38 GPIO_ACTIVE_HIGH>;
};
pci0: pci@E105400 {
status = "disabled";
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
compatible = "lantiq,pci-xway";
bus-range = <0x0 0x0>;
ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */
0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
reg = <0x7000000 0x8000 /* config space */
0xE105400 0x400>; /* pci bridge */
lantiq,bus-clock = <33333333>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <0x7000 0 0 1 &icu0 30 1>; /* slot 14, irq 30 */
req-mask = <0x1>; /* GNT1 */
};
};
vdsl {
compatible = "lantiq,vdsl-vrx200";
};
};

View file

@ -1,500 +0,0 @@
From 9afadf01b1be371ee88491819aa67364684461f9 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Fri, 3 Aug 2012 10:27:25 +0200
Subject: [PATCH 04/36] MIPS: lantiq: add atm hack
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/include/asm/mach-lantiq/lantiq_atm.h | 196 +++++++++++++++++++++++
arch/mips/include/asm/mach-lantiq/lantiq_ptm.h | 203 ++++++++++++++++++++++++
arch/mips/lantiq/irq.c | 2 +
arch/mips/mm/cache.c | 2 +
include/uapi/linux/atm.h | 6 +
net/atm/common.c | 6 +
net/atm/proc.c | 2 +-
7 files changed, 416 insertions(+), 1 deletion(-)
create mode 100644 arch/mips/include/asm/mach-lantiq/lantiq_atm.h
create mode 100644 arch/mips/include/asm/mach-lantiq/lantiq_ptm.h
--- /dev/null
+++ b/arch/mips/include/asm/mach-lantiq/lantiq_atm.h
@@ -0,0 +1,196 @@
+/******************************************************************************
+**
+** FILE NAME : ifx_atm.h
+** PROJECT : UEIP
+** MODULES : ATM
+**
+** DATE : 17 Jun 2009
+** AUTHOR : Xu Liang
+** DESCRIPTION : Global ATM driver header file
+** COPYRIGHT : Copyright (c) 2006
+** Infineon Technologies AG
+** Am Campeon 1-12, 85579 Neubiberg, Germany
+**
+** This program is free software; you can redistribute it and/or modify
+** it under the terms of the GNU General Public License as published by
+** the Free Software Foundation; either version 2 of the License, or
+** (at your option) any later version.
+**
+** HISTORY
+** $Date $Author $Comment
+** 07 JUL 2009 Xu Liang Init Version
+*******************************************************************************/
+
+#ifndef IFX_ATM_H
+#define IFX_ATM_H
+
+
+
+/*!
+ \defgroup IFX_ATM UEIP Project - ATM driver module
+ \brief UEIP Project - ATM driver module, support Danube, Amazon-SE, AR9, VR9.
+ */
+
+/*!
+ \defgroup IFX_ATM_IOCTL IOCTL Commands
+ \ingroup IFX_ATM
+ \brief IOCTL Commands used by user application.
+ */
+
+/*!
+ \defgroup IFX_ATM_STRUCT Structures
+ \ingroup IFX_ATM
+ \brief Structures used by user application.
+ */
+
+/*!
+ \file ifx_atm.h
+ \ingroup IFX_ATM
+ \brief ATM driver header file
+ */
+
+
+
+/*
+ * ####################################
+ * Definition
+ * ####################################
+ */
+
+/*!
+ \addtogroup IFX_ATM_STRUCT
+ */
+/*@{*/
+
+/*
+ * ATM MIB
+ */
+
+/*!
+ \struct atm_cell_ifEntry_t
+ \brief Structure used for Cell Level MIB Counters.
+
+ User application use this structure to call IOCTL command "PPE_ATM_MIB_CELL".
+ */
+typedef struct {
+ __u32 ifHCInOctets_h; /*!< byte counter of ingress cells (upper 32 bits, total 64 bits) */
+ __u32 ifHCInOctets_l; /*!< byte counter of ingress cells (lower 32 bits, total 64 bits) */
+ __u32 ifHCOutOctets_h; /*!< byte counter of egress cells (upper 32 bits, total 64 bits) */
+ __u32 ifHCOutOctets_l; /*!< byte counter of egress cells (lower 32 bits, total 64 bits) */
+ __u32 ifInErrors; /*!< counter of error ingress cells */
+ __u32 ifInUnknownProtos; /*!< counter of unknown ingress cells */
+ __u32 ifOutErrors; /*!< counter of error egress cells */
+} atm_cell_ifEntry_t;
+
+/*!
+ \struct atm_aal5_ifEntry_t
+ \brief Structure used for AAL5 Frame Level MIB Counters.
+
+ User application use this structure to call IOCTL command "PPE_ATM_MIB_AAL5".
+ */
+typedef struct {
+ __u32 ifHCInOctets_h; /*!< byte counter of ingress packets (upper 32 bits, total 64 bits) */
+ __u32 ifHCInOctets_l; /*!< byte counter of ingress packets (lower 32 bits, total 64 bits) */
+ __u32 ifHCOutOctets_h; /*!< byte counter of egress packets (upper 32 bits, total 64 bits) */
+ __u32 ifHCOutOctets_l; /*!< byte counter of egress packets (lower 32 bits, total 64 bits) */
+ __u32 ifInUcastPkts; /*!< counter of ingress packets */
+ __u32 ifOutUcastPkts; /*!< counter of egress packets */
+ __u32 ifInErrors; /*!< counter of error ingress packets */
+ __u32 ifInDiscards; /*!< counter of dropped ingress packets */
+ __u32 ifOutErros; /*!< counter of error egress packets */
+ __u32 ifOutDiscards; /*!< counter of dropped egress packets */
+} atm_aal5_ifEntry_t;
+
+/*!
+ \struct atm_aal5_vcc_t
+ \brief Structure used for per PVC AAL5 Frame Level MIB Counters.
+
+ This structure is a part of structure "atm_aal5_vcc_x_t".
+ */
+typedef struct {
+ __u32 aal5VccCrcErrors; /*!< counter of ingress packets with CRC error */
+ __u32 aal5VccSarTimeOuts; /*!< counter of ingress packets with Re-assemble timeout */ //no timer support yet
+ __u32 aal5VccOverSizedSDUs; /*!< counter of oversized ingress packets */
+} atm_aal5_vcc_t;
+
+/*!
+ \struct atm_aal5_vcc_x_t
+ \brief Structure used for per PVC AAL5 Frame Level MIB Counters.
+
+ User application use this structure to call IOCTL command "PPE_ATM_MIB_VCC".
+ */
+typedef struct {
+ int vpi; /*!< VPI of the VCC to get MIB counters */
+ int vci; /*!< VCI of the VCC to get MIB counters */
+ atm_aal5_vcc_t mib_vcc; /*!< structure to get MIB counters */
+} atm_aal5_vcc_x_t;
+
+/*@}*/
+
+
+
+/*
+ * ####################################
+ * IOCTL
+ * ####################################
+ */
+
+/*!
+ \addtogroup IFX_ATM_IOCTL
+ */
+/*@{*/
+
+/*
+ * ioctl Command
+ */
+/*!
+ \brief ATM IOCTL Magic Number
+ */
+#define PPE_ATM_IOC_MAGIC 'o'
+/*!
+ \brief ATM IOCTL Command - Get Cell Level MIB Counters
+
+ This command is obsolete. User can get cell level MIB from DSL API.
+ This command uses structure "atm_cell_ifEntry_t" as parameter for output of MIB counters.
+ */
+#define PPE_ATM_MIB_CELL _IOW(PPE_ATM_IOC_MAGIC, 0, atm_cell_ifEntry_t)
+/*!
+ \brief ATM IOCTL Command - Get AAL5 Level MIB Counters
+
+ Get AAL5 packet counters.
+ This command uses structure "atm_aal5_ifEntry_t" as parameter for output of MIB counters.
+ */
+#define PPE_ATM_MIB_AAL5 _IOW(PPE_ATM_IOC_MAGIC, 1, atm_aal5_ifEntry_t)
+/*!
+ \brief ATM IOCTL Command - Get Per PVC MIB Counters
+
+ Get AAL5 packet counters for each PVC.
+ This command uses structure "atm_aal5_vcc_x_t" as parameter for input of VPI/VCI information and output of MIB counters.
+ */
+#define PPE_ATM_MIB_VCC _IOWR(PPE_ATM_IOC_MAGIC, 2, atm_aal5_vcc_x_t)
+/*!
+ \brief Total Number of ATM IOCTL Commands
+ */
+#define PPE_ATM_IOC_MAXNR 3
+
+/*@}*/
+
+
+
+/*
+ * ####################################
+ * API
+ * ####################################
+ */
+
+#ifdef __KERNEL__
+struct port_cell_info {
+ unsigned int port_num;
+ unsigned int tx_link_rate[2];
+};
+#endif
+
+
+
+#endif // IFX_ATM_H
+
--- /dev/null
+++ b/arch/mips/include/asm/mach-lantiq/lantiq_ptm.h
@@ -0,0 +1,203 @@
+/******************************************************************************
+**
+** FILE NAME : ifx_ptm.h
+** PROJECT : UEIP
+** MODULES : PTM
+**
+** DATE : 17 Jun 2009
+** AUTHOR : Xu Liang
+** DESCRIPTION : Global PTM driver header file
+** COPYRIGHT : Copyright (c) 2006
+** Infineon Technologies AG
+** Am Campeon 1-12, 85579 Neubiberg, Germany
+**
+** This program is free software; you can redistribute it and/or modify
+** it under the terms of the GNU General Public License as published by
+** the Free Software Foundation; either version 2 of the License, or
+** (at your option) any later version.
+**
+** HISTORY
+** $Date $Author $Comment
+** 07 JUL 2009 Xu Liang Init Version
+*******************************************************************************/
+
+#ifndef IFX_PTM_H
+#define IFX_PTM_H
+
+
+
+/*!
+ \defgroup IFX_PTM UEIP Project - PTM driver module
+ \brief UEIP Project - PTM driver module, support Danube, Amazon-SE, AR9, VR9.
+ */
+
+/*!
+ \defgroup IFX_PTM_IOCTL IOCTL Commands
+ \ingroup IFX_PTM
+ \brief IOCTL Commands used by user application.
+ */
+
+/*!
+ \defgroup IFX_PTM_STRUCT Structures
+ \ingroup IFX_PTM
+ \brief Structures used by user application.
+ */
+
+/*!
+ \file ifx_ptm.h
+ \ingroup IFX_PTM
+ \brief PTM driver header file
+ */
+
+
+
+/*
+ * ####################################
+ * Definition
+ * ####################################
+ */
+
+
+
+/*
+ * ####################################
+ * IOCTL
+ * ####################################
+ */
+
+/*!
+ \addtogroup IFX_PTM_IOCTL
+ */
+/*@{*/
+
+/*
+ * ioctl Command
+ */
+/*!
+ \brief PTM IOCTL Command - Get codeword MIB counters.
+
+ This command uses structure "PTM_CW_IF_ENTRY_T" to get codeword level MIB counters.
+ */
+#define IFX_PTM_MIB_CW_GET SIOCDEVPRIVATE + 1
+/*!
+ \brief PTM IOCTL Command - Get packet MIB counters.
+
+ This command uses structure "PTM_FRAME_MIB_T" to get packet level MIB counters.
+ */
+#define IFX_PTM_MIB_FRAME_GET SIOCDEVPRIVATE + 2
+/*!
+ \brief PTM IOCTL Command - Get firmware configuration (CRC).
+
+ This command uses structure "IFX_PTM_CFG_T" to get firmware configuration (CRC).
+ */
+#define IFX_PTM_CFG_GET SIOCDEVPRIVATE + 3
+/*!
+ \brief PTM IOCTL Command - Set firmware configuration (CRC).
+
+ This command uses structure "IFX_PTM_CFG_T" to set firmware configuration (CRC).
+ */
+#define IFX_PTM_CFG_SET SIOCDEVPRIVATE + 4
+/*!
+ \brief PTM IOCTL Command - Program priority value to TX queue mapping.
+
+ This command uses structure "IFX_PTM_PRIO_Q_MAP_T" to program priority value to TX queue mapping.
+ */
+#define IFX_PTM_MAP_PKT_PRIO_TO_Q SIOCDEVPRIVATE + 14
+
+/*@}*/
+
+
+/*!
+ \addtogroup IFX_PTM_STRUCT
+ */
+/*@{*/
+
+/*
+ * ioctl Data Type
+ */
+
+/*!
+ \typedef PTM_CW_IF_ENTRY_T
+ \brief Wrapping of structure "ptm_cw_ifEntry_t".
+ */
+/*!
+ \struct ptm_cw_ifEntry_t
+ \brief Structure used for CodeWord level MIB counters.
+ */
+typedef struct ptm_cw_ifEntry_t {
+ uint32_t ifRxNoIdleCodewords; /*!< output, number of ingress user codeword */
+ uint32_t ifRxIdleCodewords; /*!< output, number of ingress idle codeword */
+ uint32_t ifRxCodingViolation; /*!< output, number of error ingress codeword */
+ uint32_t ifTxNoIdleCodewords; /*!< output, number of egress user codeword */
+ uint32_t ifTxIdleCodewords; /*!< output, number of egress idle codeword */
+} PTM_CW_IF_ENTRY_T;
+
+/*!
+ \typedef PTM_FRAME_MIB_T
+ \brief Wrapping of structure "ptm_frame_mib_t".
+ */
+/*!
+ \struct ptm_frame_mib_t
+ \brief Structure used for packet level MIB counters.
+ */
+typedef struct ptm_frame_mib_t {
+ uint32_t RxCorrect; /*!< output, number of ingress packet */
+ uint32_t TC_CrcError; /*!< output, number of egress packet with CRC error */
+ uint32_t RxDropped; /*!< output, number of dropped ingress packet */
+ uint32_t TxSend; /*!< output, number of egress packet */
+} PTM_FRAME_MIB_T;
+
+/*!
+ \typedef IFX_PTM_CFG_T
+ \brief Wrapping of structure "ptm_cfg_t".
+ */
+/*!
+ \struct ptm_cfg_t
+ \brief Structure used for ETH/TC CRC configuration.
+ */
+typedef struct ptm_cfg_t {
+ uint32_t RxEthCrcPresent; /*!< input/output, ingress packet has ETH CRC */
+ uint32_t RxEthCrcCheck; /*!< input/output, check ETH CRC of ingress packet */
+ uint32_t RxTcCrcCheck; /*!< input/output, check TC CRC of ingress codeword */
+ uint32_t RxTcCrcLen; /*!< input/output, length of TC CRC of ingress codeword */
+ uint32_t TxEthCrcGen; /*!< input/output, generate ETH CRC for egress packet */
+ uint32_t TxTcCrcGen; /*!< input/output, generate TC CRC for egress codeword */
+ uint32_t TxTcCrcLen; /*!< input/output, length of TC CRC of egress codeword */
+} IFX_PTM_CFG_T;
+
+/*!
+ \typedef IFX_PTM_PRIO_Q_MAP_T
+ \brief Wrapping of structure "ppe_prio_q_map".
+ */
+/*!
+ \struct ppe_prio_q_map
+ \brief Structure used for Priority Value to TX Queue mapping.
+ */
+typedef struct ppe_prio_q_map {
+ int pkt_prio;
+ int qid;
+ int vpi; // ignored in eth interface
+ int vci; // ignored in eth interface
+} IFX_PTM_PRIO_Q_MAP_T;
+
+/*@}*/
+
+
+
+/*
+ * ####################################
+ * API
+ * ####################################
+ */
+
+#ifdef __KERNEL__
+struct port_cell_info {
+ unsigned int port_num;
+ unsigned int tx_link_rate[2];
+};
+#endif
+
+
+
+#endif // IFX_PTM_H
+
--- a/arch/mips/lantiq/irq.c
+++ b/arch/mips/lantiq/irq.c
@@ -14,6 +14,7 @@
#include <linux/of_platform.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
+#include <linux/module.h>
#include <asm/bootinfo.h>
#include <asm/irq_cpu.h>
@@ -100,6 +101,7 @@ void ltq_mask_and_ack_irq(struct irq_dat
ltq_icu_w32(im, ltq_icu_r32(im, ier) & ~BIT(offset), ier);
ltq_icu_w32(im, BIT(offset), isr);
}
+EXPORT_SYMBOL(ltq_mask_and_ack_irq);
static void ltq_ack_irq(struct irq_data *d)
{
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -63,6 +63,8 @@ void (*_dma_cache_wback)(unsigned long s
void (*_dma_cache_inv)(unsigned long start, unsigned long size);
EXPORT_SYMBOL(_dma_cache_wback_inv);
+EXPORT_SYMBOL(_dma_cache_wback);
+EXPORT_SYMBOL(_dma_cache_inv);
#endif /* CONFIG_DMA_NONCOHERENT || CONFIG_DMA_MAYBE_COHERENT */
--- a/include/uapi/linux/atm.h
+++ b/include/uapi/linux/atm.h
@@ -130,8 +130,14 @@
#define ATM_ABR 4
#define ATM_ANYCLASS 5 /* compatible with everything */
+#define ATM_VBR_NRT ATM_VBR
+#define ATM_VBR_RT 6
+#define ATM_UBR_PLUS 7
+#define ATM_GFR 8
+
#define ATM_MAX_PCR -1 /* maximum available PCR */
+
struct atm_trafprm {
unsigned char traffic_class; /* traffic class (ATM_UBR, ...) */
int max_pcr; /* maximum PCR in cells per second */
--- a/net/atm/common.c
+++ b/net/atm/common.c
@@ -62,11 +62,17 @@ static void vcc_remove_socket(struct soc
write_unlock_irq(&vcc_sklist_lock);
}
+struct sk_buff* (*ifx_atm_alloc_tx)(struct atm_vcc *, unsigned int) = NULL;
+EXPORT_SYMBOL(ifx_atm_alloc_tx);
+
static struct sk_buff *alloc_tx(struct atm_vcc *vcc, unsigned int size)
{
struct sk_buff *skb;
struct sock *sk = sk_atm(vcc);
+ if (ifx_atm_alloc_tx != NULL)
+ return ifx_atm_alloc_tx(vcc, size);
+
if (sk_wmem_alloc_get(sk) && !atm_may_send(vcc, size)) {
pr_debug("Sorry: wmem_alloc = %d, size = %d, sndbuf = %d\n",
sk_wmem_alloc_get(sk), size, sk->sk_sndbuf);
--- a/net/atm/proc.c
+++ b/net/atm/proc.c
@@ -154,7 +154,7 @@ static void *vcc_seq_next(struct seq_fil
static void pvc_info(struct seq_file *seq, struct atm_vcc *vcc)
{
static const char *const class_name[] = {
- "off", "UBR", "CBR", "VBR", "ABR"};
+ "off","UBR","CBR","NTR-VBR","ABR","ANY","RT-VBR","UBR+","GFR"};
static const char *const aal_name[] = {
"---", "1", "2", "3/4", /* 0- 3 */
"???", "5", "???", "???", /* 4- 7 */

View file

@ -1,122 +0,0 @@
From 997a8965db8417266bea3fbdcfa3e5655a1b52fa Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Tue, 9 Sep 2014 23:12:15 +0200
Subject: [PATCH 18/36] MTD: nand: lots of xrx200 fixes
Signed-off-by: John Crispin <blogic@openwrt.org>
---
drivers/mtd/nand/xway_nand.c | 63 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 63 insertions(+)
--- a/drivers/mtd/nand/xway_nand.c
+++ b/drivers/mtd/nand/xway_nand.c
@@ -63,6 +63,24 @@
#define NAND_CON_CSMUX (1 << 1)
#define NAND_CON_NANDM 1
+#define DANUBE_PCI_REG32( addr ) (*(volatile u32 *)(addr))
+#define PCI_CR_PR_OFFSET (KSEG1+0x1E105400)
+#define PCI_CR_PC_ARB (PCI_CR_PR_OFFSET + 0x0080)
+
+/*
+ * req_mask provides a mechanism to prevent interference between
+ * nand and pci (probably only relevant for the BT Home Hub 2B).
+ * Setting it causes the corresponding pci req pins to be masked
+ * during nand access, and also moves ebu locking from the read/write
+ * functions to the chip select function to ensure that the whole
+ * operation runs with interrupts disabled.
+ * In addition it switches on some extra waiting in xway_cmd_ctrl().
+ * This seems to be necessary if the ebu_cs1 pin has open-drain disabled,
+ * which in turn seems to be necessary for the nor chip to be recognised
+ * reliably, on a board (Home Hub 2B again) which has both nor and nand.
+ */
+static __be32 req_mask = 0;
+
struct xway_nand_data {
struct nand_chip chip;
unsigned long csflags;
@@ -94,10 +112,22 @@ static void xway_select_chip(struct mtd_
case -1:
ltq_ebu_w32_mask(NAND_CON_CE, 0, EBU_NAND_CON);
ltq_ebu_w32_mask(NAND_CON_NANDM, 0, EBU_NAND_CON);
+
+ if (req_mask) {
+ /* Unmask all external PCI request */
+ DANUBE_PCI_REG32(PCI_CR_PC_ARB) &= ~(req_mask << 16);
+ }
+
spin_unlock_irqrestore(&ebu_lock, data->csflags);
break;
case 0:
spin_lock_irqsave(&ebu_lock, data->csflags);
+
+ if (req_mask) {
+ /* Mask all external PCI request */
+ DANUBE_PCI_REG32(PCI_CR_PC_ARB) |= (req_mask << 16);
+ }
+
ltq_ebu_w32_mask(0, NAND_CON_NANDM, EBU_NAND_CON);
ltq_ebu_w32_mask(0, NAND_CON_CE, EBU_NAND_CON);
break;
@@ -108,6 +138,12 @@ static void xway_select_chip(struct mtd_
static void xway_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
+
+ if (req_mask) {
+ if (cmd != NAND_CMD_STATUS)
+ ltq_ebu_w32(0, EBU_NAND_WAIT); /* Clear nand ready */
+ }
+
if (cmd == NAND_CMD_NONE)
return;
@@ -118,6 +154,24 @@ static void xway_cmd_ctrl(struct mtd_inf
while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
;
+
+ if (req_mask) {
+ /*
+ * program and erase have their own busy handlers
+ * status and sequential in needs no delay
+ */
+ switch (cmd) {
+ case NAND_CMD_ERASE1:
+ case NAND_CMD_SEQIN:
+ case NAND_CMD_STATUS:
+ case NAND_CMD_READID:
+ return;
+ }
+
+ /* wait until command is processed */
+ while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_RD) == 0)
+ ;
+ }
}
static int xway_dev_ready(struct mtd_info *mtd)
@@ -157,6 +211,7 @@ static int xway_nand_probe(struct platfo
int err;
u32 cs;
u32 cs_flag = 0;
+ const __be32 *req_mask_ptr;
/* Allocate memory for the device structure (and zero it) */
data = devm_kzalloc(&pdev->dev, sizeof(struct xway_nand_data),
@@ -192,6 +247,15 @@ static int xway_nand_probe(struct platfo
if (!err && cs == 1)
cs_flag = NAND_CON_IN_CS1 | NAND_CON_OUT_CS1;
+ req_mask_ptr = of_get_property(pdev->dev.of_node,
+ "req-mask", NULL);
+
+ /*
+ * Load the PCI req lines to mask from the device tree. If the
+ * property is not present, setting req_mask to 0 disables masking.
+ */
+ req_mask = (req_mask_ptr ? *req_mask_ptr : 0);
+
/* setup the EBU to run in NAND mode on our base addr */
ltq_ebu_w32(CPHYSADDR(data->nandaddr)
| ADDSEL1_MASK(3) | ADDSEL1_REGEN, EBU_ADDSEL1);

View file

@ -1,25 +0,0 @@
From e3b20f04e9f9cae1babe091fdc1d08d7703ae344 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Thu, 7 Aug 2014 18:18:00 +0200
Subject: [PATCH 20/36] MTD: lantiq: handle NO_XIP on cfi0001 flash
Signed-off-by: John Crispin <blogic@openwrt.org>
---
drivers/mtd/maps/lantiq-flash.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/mtd/maps/lantiq-flash.c
+++ b/drivers/mtd/maps/lantiq-flash.c
@@ -137,7 +137,11 @@ ltq_mtd_probe(struct platform_device *pd
if (!ltq_mtd->map)
return -ENOMEM;
- ltq_mtd->map->phys = ltq_mtd->res->start;
+ if (of_find_property(pdev->dev.of_node, "lantiq,noxip", NULL))
+ ltq_mtd->map->phys = NO_XIP;
+ else
+ ltq_mtd->map->phys = ltq_mtd->res->start;
+ ltq_mtd->res->start;
ltq_mtd->map->size = resource_size(ltq_mtd->res);
ltq_mtd->map->virt = devm_ioremap_resource(&pdev->dev, ltq_mtd->res);
if (IS_ERR(ltq_mtd->map->virt))

View file

@ -1,44 +0,0 @@
From 4400e1f593ea40a51912128adb4f53d59e62cad8 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Wed, 10 Sep 2014 22:40:18 +0200
Subject: [PATCH 22/36] MTD: m25p80: allow loading mtd name from OF
In accordance with the physmap flash we should honour the linux,mtd-name
property when deciding what name the mtd device has.
Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
Signed-off-by: John Crispin <blogic@openwrt.org>
---
drivers/mtd/devices/m25p80.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -19,6 +19,7 @@
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/device.h>
+#include <linux/of.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
@@ -200,6 +201,10 @@ static int m25p_probe(struct spi_device
enum read_mode mode = SPI_NOR_NORMAL;
char *flash_name;
int ret;
+ const char __maybe_unused *of_mtd_name = NULL;
+
+ of_property_read_string(spi->dev.of_node,
+ "linux,mtd-name", &of_mtd_name);
data = dev_get_platdata(&spi->dev);
@@ -229,6 +234,8 @@ static int m25p_probe(struct spi_device
if (data && data->name)
nor->mtd.name = data->name;
+ else if (of_mtd_name)
+ nor->mtd.name = of_mtd_name;
/* For some (historical?) reason many platforms provide two different
* names in flash_platform_data: "name" and "type". Quite often name is

View file

@ -1,294 +0,0 @@
From 0a63ab263725c427051a8bbaa0732b749627da27 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Thu, 7 Aug 2014 18:15:36 +0200
Subject: [PATCH 23/36] NET: PHY: adds driver for lantiq PHY11G
Signed-off-by: John Crispin <blogic@openwrt.org>
---
drivers/net/phy/Kconfig | 5 +
drivers/net/phy/Makefile | 1 +
drivers/net/phy/lantiq.c | 231 ++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 237 insertions(+)
create mode 100644 drivers/net/phy/lantiq.c
--- a/drivers/net/phy/intel-xway.c
+++ b/drivers/net/phy/intel-xway.c
@@ -152,6 +152,51 @@
#define PHY_ID_PHY11G_VR9 0xD565A409
#define PHY_ID_PHY22F_VR9 0xD565A419
+#if IS_ENABLED(CONFIG_OF_MDIO)
+static int vr9_gphy_of_reg_init(struct phy_device *phydev)
+{
+ u32 tmp;
+
+ /* store the led values if one was passed by the devicetree */
+ if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,ledch", &tmp))
+ phy_write_mmd_indirect(phydev, XWAY_MMD_LEDCH, MDIO_MMD_VEND2, tmp);
+
+ if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,ledcl", &tmp))
+ phy_write_mmd_indirect(phydev, XWAY_MMD_LEDCL, MDIO_MMD_VEND2, tmp);
+
+ if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led0h", &tmp))
+ phy_write_mmd_indirect(phydev, XWAY_MMD_LED0H, MDIO_MMD_VEND2, tmp);
+
+ if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led0l", &tmp))
+ phy_write_mmd_indirect(phydev, XWAY_MMD_LED0L, MDIO_MMD_VEND2, tmp);
+
+ if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led1h", &tmp))
+ phy_write_mmd_indirect(phydev, XWAY_MMD_LED1H, MDIO_MMD_VEND2, tmp);
+
+ if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led1l", &tmp))
+ phy_write_mmd_indirect(phydev, XWAY_MMD_LED1L, MDIO_MMD_VEND2, tmp);
+
+ if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led2h", &tmp))
+ phy_write_mmd_indirect(phydev, XWAY_MMD_LED3H, MDIO_MMD_VEND2, tmp);
+
+ if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led2l", &tmp))
+ phy_write_mmd_indirect(phydev, XWAY_MMD_LED3L, MDIO_MMD_VEND2, tmp);
+
+ if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led3h", &tmp))
+ phy_write_mmd_indirect(phydev, XWAY_MMD_LED3H, MDIO_MMD_VEND2, tmp);
+
+ if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led3l", &tmp))
+ phy_write_mmd_indirect(phydev, XWAY_MMD_LED3L, MDIO_MMD_VEND2, tmp);
+
+ return 0;
+}
+#else
+static int vr9_gphy_of_reg_init(struct phy_device *phydev)
+{
+ return 0;
+}
+#endif /* CONFIG_OF_MDIO */
+
static int xway_gphy_config_init(struct phy_device *phydev)
{
int err;
@@ -190,6 +235,7 @@ static int xway_gphy_config_init(struct
phy_write_mmd_indirect(phydev, XWAY_MMD_LED2H, MDIO_MMD_VEND2, ledxh);
phy_write_mmd_indirect(phydev, XWAY_MMD_LED2L, MDIO_MMD_VEND2, ledxl);
+ vr9_gphy_of_reg_init(phydev);
return 0;
}
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-lanitq.txt
@@ -0,0 +1,216 @@
+Lanitq PHY binding
+============================================
+
+This devicetree binding controls the lantiq ethernet phys led functionality.
+
+Example:
+ mdio@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "lantiq,xrx200-mdio";
+ phy5: ethernet-phy@5 {
+ reg = <0x1>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ phy11: ethernet-phy@11 {
+ reg = <0x11>;
+ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+ lantiq,led2h = <0x00>;
+ lantiq,led2l = <0x03>;
+ };
+ phy12: ethernet-phy@12 {
+ reg = <0x12>;
+ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+ lantiq,led1h = <0x00>;
+ lantiq,led1l = <0x03>;
+ };
+ phy13: ethernet-phy@13 {
+ reg = <0x13>;
+ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+ lantiq,led2h = <0x00>;
+ lantiq,led2l = <0x03>;
+ };
+ phy14: ethernet-phy@14 {
+ reg = <0x14>;
+ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+ lantiq,led1h = <0x00>;
+ lantiq,led1l = <0x03>;
+ };
+ };
+
+Register Description
+============================================
+
+LEDCH:
+
+Name Hardware Reset Value
+LEDCH 0x00C5
+
+| 15 | | | | | | | 8 |
+=========================================
+| RES |
+=========================================
+
+| 7 | | | | | | | 0 |
+=========================================
+| FBF | SBF |RES | NACS |
+=========================================
+
+Field Bits Type Description
+FBF 7:6 RW Fast Blink Frequency
+ ---
+ 0x0 (00b) F02HZ 2 Hz blinking frequency
+ 0x1 (01b) F04HZ 4 Hz blinking frequency
+ 0x2 (10b) F08HZ 8 Hz blinking frequency
+ 0x3 (11b) F16HZ 16 Hz blinking frequency
+
+SBF 5:4 RW Slow Blink Frequency
+ ---
+ 0x0 (00b) F02HZ 2 Hz blinking frequency
+ 0x1 (01b) F04HZ 4 Hz blinking frequency
+ 0x2 (10b) F08HZ 8 Hz blinking frequency
+ 0x3 (11b) F16HZ 16 Hz blinking frequency
+
+NACS 2:0 RW Inverse of Scan Function
+ ---
+ 0x0 (000b) NONE No Function
+ 0x1 (001b) LINK Complex function enabled when link is up
+ 0x2 (010b) PDOWN Complex function enabled when device is powered-down
+ 0x3 (011b) EEE Complex function enabled when device is in EEE mode
+ 0x4 (100b) ANEG Complex function enabled when auto-negotiation is running
+ 0x5 (101b) ABIST Complex function enabled when analog self-test is running
+ 0x6 (110b) CDIAG Complex function enabled when cable diagnostics are running
+ 0x7 (111b) TEST Complex function enabled when test mode is running
+
+LEDCL:
+
+Name Hardware Reset Value
+LEDCL 0x0067
+
+| 15 | | | | | | | 8 |
+=========================================
+| RES |
+=========================================
+
+| 7 | | | | | | | 0 |
+=========================================
+|RES | SCAN |RES | CBLINK |
+=========================================
+
+Field Bits Type Description
+SCAN 6:4 RW Complex Scan Configuration
+ ---
+ 000 B NONE No Function
+ 001 B LINK Complex function enabled when link is up
+ 010 B PDOWN Complex function enabled when device is powered-down
+ 011 B EEE Complex function enabled when device is in EEE mode
+ 100 B ANEG Complex function enabled when auto-negotiation is running
+ 101 B ABIST Complex function enabled when analog self-test is running
+ 110 B CDIAG Complex function enabled when cable diagnostics are running
+ 111 B TEST Complex function enabled when test mode is running
+
+CBLINK 2:0 RW Complex Blinking Configuration
+ ---
+ 000 B NONE No Function
+ 001 B LINK Complex function enabled when link is up
+ 010 B PDOWN Complex function enabled when device is powered-down
+ 011 B EEE Complex function enabled when device is in EEE mode
+ 100 B ANEG Complex function enabled when auto-negotiation is running
+ 101 B ABIST Complex function enabled when analog self-test is running
+ 110 B CDIAG Complex function enabled when cable diagnostics are running
+ 111 B TEST Complex function enabled when test mode is running
+
+LEDxH:
+
+Name Hardware Reset Value
+LED0H 0x0070
+LED1H 0x0020
+LED2H 0x0040
+LED3H 0x0040
+
+| 15 | | | | | | | 8 |
+=========================================
+| RES |
+=========================================
+
+| 7 | | | | | | | 0 |
+=========================================
+| CON | BLINKF |
+=========================================
+
+Field Bits Type Description
+CON 7:4 RW Constant On Configuration
+ ---
+ 0x0 (0000b) NONE LED does not light up constantly
+ 0x1 (0001b) LINK10 LED is on when link is 10 Mbit/s
+ 0x2 (0010b) LINK100 LED is on when link is 100 Mbit/s
+ 0x3 (0011b) LINK10X LED is on when link is 10/100 Mbit/s
+ 0x4 (0100b) LINK1000 LED is on when link is 1000 Mbit/s
+ 0x5 (0101b) LINK10_0 LED is on when link is 10/1000 Mbit/s
+ 0x6 (0110b) LINK100X LED is on when link is 100/1000 Mbit/s
+ 0x7 (0111b) LINK10XX LED is on when link is 10/100/1000 Mbit/s
+ 0x8 (1000b) PDOWN LED is on when device is powered-down
+ 0x9 (1001b) EEE LED is on when device is in EEE mode
+ 0xA (1010b) ANEG LED is on when auto-negotiation is running
+ 0xB (1011b) ABIST LED is on when analog self-test is running
+ 0xC (1100b) CDIAG LED is on when cable diagnostics are running
+
+BLINKF 3:0 RW Fast Blinking Configuration
+ ---
+ 0x0 (0000b) NONE No Blinking
+ 0x1 (0001b) LINK10 Blink when link is 10 Mbit/s
+ 0x2 (0010b) LINK100 Blink when link is 100 Mbit/s
+ 0x3 (0011b) LINK10X Blink when link is 10/100 Mbit/s
+ 0x4 (0100b) LINK1000 Blink when link is 1000 Mbit/s
+ 0x5 (0101b) LINK10_0 Blink when link is 10/1000 Mbit/s
+ 0x6 (0110b) LINK100X Blink when link is 100/1000 Mbit/s
+ 0x7 (0111b) LINK10XX Blink when link is 10/100/1000 Mbit/s
+ 0x8 (1000b) PDOWN Blink when device is powered-down
+ 0x9 (1001b) EEE Blink when device is in EEE mode
+ 0xA (1010b) ANEG Blink when auto-negotiation is running
+ 0xB (1011b) ABIST Blink when analog self-test is running
+ 0xC (1100b) CDIAG Blink when cable diagnostics are running
+
+LEDxL:
+
+Name Hardware Reset Value
+LED0L 0x0003
+LED1L 0x0000
+LED2L 0x0000
+LED3L 0x0020
+
+| 15 | | | | | | | 8 |
+=========================================
+| RES |
+=========================================
+
+| 7 | | | | | | | 0 |
+=========================================
+| BLINKS | PULSE |
+=========================================
+
+Field Bits Type Description
+BLINKS 7:4 RW Slow Blinkin Configuration
+ ---
+ 0x0 (0000b) NONE No Blinking
+ 0x1 (0001b) LINK10 Blink when link is 10 Mbit/s
+ 0x2 (0010b) LINK100 Blink when link is 100 Mbit/s
+ 0x3 (0011b) LINK10X Blink when link is 10/100 Mbit/s
+ 0x4 (0100b) LINK1000 Blink when link is 1000 Mbit/s
+ 0x5 (0101b) LINK10_0 Blink when link is 10/1000 Mbit/s
+ 0x6 (0110b) LINK100X Blink when link is 100/1000 Mbit/s
+ 0x7 (0111b) LINK10XX Blink when link is 10/100/1000 Mbit/s
+ 0x8 (1000b) PDOWN Blink when device is powered-down
+ 0x9 (1001b) EEE Blink when device is in EEE mode
+ 0xA (1010b) ANEG Blink when auto-negotiation is running
+ 0xB (1011b) ABIST Blink when analog self-test is running
+ 0xC (1100b) CDIAG Blink when cable diagnostics are runningning
+
+PULSE 3:0 RW Pulsing Configuration
+ The pulse field is a mask field by which certain events can be combined
+ ---
+ 0x0 (0000b) NONE No pulsing
+ 0x1 (0001b) TXACT Transmit activity
+ 0x2 (0010b) RXACT Receive activity
+ 0x4 (0100b) COL Collision
+ 0x8 (1000b) RES Reserved

View file

@ -1,364 +0,0 @@
From 77e89d5a28be35058041c79e9874ab26f222c603 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Mon, 22 Oct 2012 09:26:24 +0200
Subject: [PATCH 24/36] NET: lantiq: adds PHY11G firmware blobs
Signed-off-by: John Crispin <blogic@openwrt.org>
---
firmware/Makefile | 4 +
firmware/lantiq/COPYING | 286 +++++++++++++++++++++++++++++++++++++++++++++++
firmware/lantiq/README | 45 ++++++++
3 files changed, 335 insertions(+)
create mode 100644 firmware/lantiq/COPYING
create mode 100644 firmware/lantiq/README
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -134,6 +134,10 @@ fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_P
fw-shipped-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda/xircom_pgs.fw
fw-shipped-$(CONFIG_USB_VICAM) += vicam/firmware.fw
fw-shipped-$(CONFIG_VIDEO_CPIA2) += cpia2/stv0672_vp4.bin
+fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/xrx200_phy11g_a14.bin
+fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/xrx200_phy11g_a22.bin
+fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/xrx200_phy22f_a14.bin
+fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/xrx200_phy22f_a22.bin
fw-shipped-$(CONFIG_YAM) += yam/1200.bin yam/9600.bin
fw-shipped-all := $(fw-shipped-y) $(fw-shipped-m) $(fw-shipped-)
--- /dev/null
+++ b/firmware/lantiq/COPYING
@@ -0,0 +1,286 @@
+All firmware files are copyrighted by Lantiq Deutschland GmbH.
+The files have been extracted from header files found in Lantiq BSPs.
+If not stated otherwise all files are licensed under GPL.
+
+=======================================================================
+
+ GNU GENERAL PUBLIC LICENSE
+ Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+ 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The licenses for most software are designed to take away your
+freedom to share and change it. By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it. (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.) You can apply it to
+your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must show them these terms so they know their
+rights.
+
+ We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ Finally, any free program is threatened constantly by software
+patents. We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary. To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+
+ GNU GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License. The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language. (Hereinafter, translation is included without limitation in
+the term "modification".) Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope. The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+ 1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+ 2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+ a) You must cause the modified files to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ b) You must cause any work that you distribute or publish, that in
+ whole or in part contains or is derived from the Program or any
+ part thereof, to be licensed as a whole at no charge to all third
+ parties under the terms of this License.
+
+ c) If the modified program normally reads commands interactively
+ when run, you must cause it, when started running for such
+ interactive use in the most ordinary way, to print or display an
+ announcement including an appropriate copyright notice and a
+ notice that there is no warranty (or else, saying that you provide
+ a warranty) and that users may redistribute the program under
+ these conditions, and telling the user how to view a copy of this
+ License. (Exception: if the Program itself is interactive but
+ does not normally print such an announcement, your work based on
+ the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole. If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works. But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+ 3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+ a) Accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of Sections
+ 1 and 2 above on a medium customarily used for software interchange; or,
+
+ b) Accompany it with a written offer, valid for at least three
+ years, to give any third party, for a charge no more than your
+ cost of physically performing source distribution, a complete
+ machine-readable copy of the corresponding source code, to be
+ distributed under the terms of Sections 1 and 2 above on a medium
+ customarily used for software interchange; or,
+
+ c) Accompany it with the information you received as to the offer
+ to distribute corresponding source code. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form with such
+ an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it. For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable. However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+ 4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License. Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+ 5. You are not required to accept this License, since you have not
+signed it. However, nothing else grants you permission to modify or
+distribute the Program or its derivative works. These actions are
+prohibited by law if you do not accept this License. Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+ 6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions. You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+ 7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all. For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices. Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+ 8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded. In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+ 9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation. If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+ 10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission. For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this. Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+ NO WARRANTY
+
+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+ END OF TERMS AND CONDITIONS
--- /dev/null
+++ b/firmware/lantiq/README
@@ -0,0 +1,45 @@
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+# (C) Copyright 2007 - 2012
+# Lantiq Deutschland GmbH
+#
+# (C) Copyright 2012
+# Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
+#
+
+#
+# How to use
+#
+Configure kernel with:
+CONFIG_FW_LOADER=y
+CONFIG_EXTRA_FIRMWARE_DIR="FIRMWARE_DIR"
+CONFIG_EXTRA_FIRMWARE="FIRMWARE_FILES"
+
+where FIRMWARE_DIR should point to this git tree and FIRMWARE_FILES is a list
+of space separated files from list below.
+
+#
+# Firmware files
+#
+
+# GPHY core on Lantiq XWAY VR9 v1.1
+lantiq/xrx200_phy11g_a14.bin
+lantiq/xrx200_phy22f_a14.bin
+
+# GPHY core on Lantiq XWAY VR9 v1.2
+lantiq/xrx200_phy11g_a22.bin
+lantiq/xrx200_phy22f_a22.bin

View file

@ -1,53 +0,0 @@
From c6feeeb407a3b8a6597ae377ba4dd138e185e3dd Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 27 Jul 2014 09:38:50 +0100
Subject: [PATCH 26/36] NET: multi phy support
Signed-off-by: John Crispin <blogic@openwrt.org>
---
drivers/net/phy/phy.c | 9 ++++++---
include/linux/phy.h | 1 +
2 files changed, 7 insertions(+), 3 deletions(-)
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -1038,7 +1038,8 @@ void phy_state_machine(struct work_struc
/* If the link is down, give up on negotiation for now */
if (!phydev->link) {
phydev->state = PHY_NOLINK;
- netif_carrier_off(phydev->attached_dev);
+ if (!phydev->no_auto_carrier_off)
+ netif_carrier_off(phydev->attached_dev);
phydev->adjust_link(phydev->attached_dev);
break;
}
@@ -1130,7 +1131,8 @@ void phy_state_machine(struct work_struc
netif_carrier_on(phydev->attached_dev);
} else {
phydev->state = PHY_NOLINK;
- netif_carrier_off(phydev->attached_dev);
+ if (!phydev->no_auto_carrier_off)
+ netif_carrier_off(phydev->attached_dev);
}
phydev->adjust_link(phydev->attached_dev);
@@ -1142,7 +1144,8 @@ void phy_state_machine(struct work_struc
case PHY_HALTED:
if (phydev->link) {
phydev->link = 0;
- netif_carrier_off(phydev->attached_dev);
+ if (!phydev->no_auto_carrier_off)
+ netif_carrier_off(phydev->attached_dev);
phydev->adjust_link(phydev->attached_dev);
do_suspend = true;
}
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -369,6 +369,7 @@ struct phy_device {
bool is_pseudo_fixed_link;
bool has_fixups;
bool suspended;
+ bool no_auto_carrier_off;
enum phy_state state;

View file

@ -1,62 +0,0 @@
From 5b73d9955fb4b0e3c37f8f6c71910293246c89dc Mon Sep 17 00:00:00 2001
From: Mathias Kresin <dev@kresin.me>
Date: Thu, 22 Mar 2018 23:31:38 +0100
Subject: [PATCH 1/2] net: phy: intel-xway: add VR9 version number
The VR9 phy ids are matching only for the SoC version 1.2. Rename the
macros and change the names to take this into account.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/phy/intel-xway.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
--- a/drivers/net/phy/intel-xway.c
+++ b/drivers/net/phy/intel-xway.c
@@ -149,8 +149,8 @@
#define PHY_ID_PHY22F_1_4 0xD565A410
#define PHY_ID_PHY11G_1_5 0xD565A401
#define PHY_ID_PHY22F_1_5 0xD565A411
-#define PHY_ID_PHY11G_VR9 0xD565A409
-#define PHY_ID_PHY22F_VR9 0xD565A419
+#define PHY_ID_PHY11G_VR9_1_2 0xD565A409
+#define PHY_ID_PHY22F_VR9_1_2 0xD565A419
#if IS_ENABLED(CONFIG_OF_MDIO)
static int vr9_gphy_of_reg_init(struct phy_device *phydev)
@@ -372,9 +372,9 @@ static struct phy_driver xway_gphy[] = {
.suspend = genphy_suspend,
.resume = genphy_resume,
}, {
- .phy_id = PHY_ID_PHY11G_VR9,
+ .phy_id = PHY_ID_PHY11G_VR9_1_2,
.phy_id_mask = 0xffffffff,
- .name = "Intel XWAY PHY11G (xRX integrated)",
+ .name = "Intel XWAY PHY11G (xRX v1.2 integrated)",
.features = (PHY_GBIT_FEATURES | SUPPORTED_Pause |
SUPPORTED_Asym_Pause),
.flags = PHY_HAS_INTERRUPT,
@@ -387,9 +387,9 @@ static struct phy_driver xway_gphy[] = {
.suspend = genphy_suspend,
.resume = genphy_resume,
}, {
- .phy_id = PHY_ID_PHY22F_VR9,
+ .phy_id = PHY_ID_PHY22F_VR9_1_2,
.phy_id_mask = 0xffffffff,
- .name = "Intel XWAY PHY22F (xRX integrated)",
+ .name = "Intel XWAY PHY22F (xRX v1.2 integrated)",
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause |
SUPPORTED_Asym_Pause),
.flags = PHY_HAS_INTERRUPT,
@@ -412,8 +412,8 @@ static struct mdio_device_id __maybe_unu
{ PHY_ID_PHY22F_1_4, 0xffffffff },
{ PHY_ID_PHY11G_1_5, 0xffffffff },
{ PHY_ID_PHY22F_1_5, 0xffffffff },
- { PHY_ID_PHY11G_VR9, 0xffffffff },
- { PHY_ID_PHY22F_VR9, 0xffffffff },
+ { PHY_ID_PHY11G_VR9_1_2, 0xffffffff },
+ { PHY_ID_PHY22F_VR9_1_2, 0xffffffff },
{ }
};
MODULE_DEVICE_TABLE(mdio, xway_gphy_tbl);

View file

@ -1,71 +0,0 @@
From f452518c982e57538e6d49da0a2c80eef22087ab Mon Sep 17 00:00:00 2001
From: Mathias Kresin <dev@kresin.me>
Date: Thu, 22 Mar 2018 23:31:39 +0100
Subject: [PATCH 2/2] net: phy: intel-xway: add VR9 v1.1 phy ids
The phys embedded into the v1.1 of the VR9 SoC are using different phy
ids. Add the phy ids to use the driver for this VR9 version as well.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/phy/intel-xway.c | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
--- a/drivers/net/phy/intel-xway.c
+++ b/drivers/net/phy/intel-xway.c
@@ -149,6 +149,8 @@
#define PHY_ID_PHY22F_1_4 0xD565A410
#define PHY_ID_PHY11G_1_5 0xD565A401
#define PHY_ID_PHY22F_1_5 0xD565A411
+#define PHY_ID_PHY11G_VR9_1_1 0xD565A408
+#define PHY_ID_PHY22F_VR9_1_1 0xD565A418
#define PHY_ID_PHY11G_VR9_1_2 0xD565A409
#define PHY_ID_PHY22F_VR9_1_2 0xD565A419
@@ -372,6 +374,36 @@ static struct phy_driver xway_gphy[] = {
.suspend = genphy_suspend,
.resume = genphy_resume,
}, {
+ .phy_id = PHY_ID_PHY11G_VR9_1_1,
+ .phy_id_mask = 0xffffffff,
+ .name = "Intel XWAY PHY11G (xRX v1.1 integrated)",
+ .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause),
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = xway_gphy_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = xway_gphy_ack_interrupt,
+ .did_interrupt = xway_gphy_did_interrupt,
+ .config_intr = xway_gphy_config_intr,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ }, {
+ .phy_id = PHY_ID_PHY22F_VR9_1_1,
+ .phy_id_mask = 0xffffffff,
+ .name = "Intel XWAY PHY22F (xRX v1.1 integrated)",
+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause),
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = xway_gphy_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = xway_gphy_ack_interrupt,
+ .did_interrupt = xway_gphy_did_interrupt,
+ .config_intr = xway_gphy_config_intr,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ }, {
.phy_id = PHY_ID_PHY11G_VR9_1_2,
.phy_id_mask = 0xffffffff,
.name = "Intel XWAY PHY11G (xRX v1.2 integrated)",
@@ -412,6 +444,8 @@ static struct mdio_device_id __maybe_unu
{ PHY_ID_PHY22F_1_4, 0xffffffff },
{ PHY_ID_PHY11G_1_5, 0xffffffff },
{ PHY_ID_PHY22F_1_5, 0xffffffff },
+ { PHY_ID_PHY11G_VR9_1_1, 0xffffffff },
+ { PHY_ID_PHY22F_VR9_1_1, 0xffffffff },
{ PHY_ID_PHY11G_VR9_1_2, 0xffffffff },
{ PHY_ID_PHY22F_VR9_1_2, 0xffffffff },
{ }

View file

@ -1,880 +0,0 @@
From 870ed9cae083ff8a60a739ef7e74c5a1800533be Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Tue, 9 Sep 2014 22:45:34 +0200
Subject: [PATCH 28/36] NET: lantiq: various etop fixes
Signed-off-by: John Crispin <blogic@openwrt.org>
---
drivers/net/ethernet/lantiq_etop.c | 555 +++++++++++++++++++++++++-----------
1 file changed, 389 insertions(+), 166 deletions(-)
--- a/drivers/net/ethernet/lantiq_etop.c
+++ b/drivers/net/ethernet/lantiq_etop.c
@@ -11,7 +11,7 @@
* You should have received a copy of the GNU General Public License
* along with this program; if not, see <http://www.gnu.org/licenses/>.
*
- * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
+ * Copyright (C) 2011-12 John Crispin <blogic@openwrt.org>
*/
#include <linux/kernel.h>
@@ -30,11 +30,16 @@
#include <linux/mm.h>
#include <linux/platform_device.h>
#include <linux/ethtool.h>
+#include <linux/if_vlan.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/dma-mapping.h>
#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/of_net.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
#include <asm/checksum.h>
@@ -42,7 +47,7 @@
#include <xway_dma.h>
#include <lantiq_platform.h>
-#define LTQ_ETOP_MDIO 0x11804
+#define LTQ_ETOP_MDIO_ACC 0x11804
#define MDIO_REQUEST 0x80000000
#define MDIO_READ 0x40000000
#define MDIO_ADDR_MASK 0x1f
@@ -51,44 +56,91 @@
#define MDIO_REG_OFFSET 0x10
#define MDIO_VAL_MASK 0xffff
-#define PPE32_CGEN 0x800
-#define LQ_PPE32_ENET_MAC_CFG 0x1840
+#define LTQ_ETOP_MDIO_CFG 0x11800
+#define MDIO_CFG_MASK 0x6
+
+#define LTQ_ETOP_CFG 0x11808
+#define LTQ_ETOP_IGPLEN 0x11820
+#define LTQ_ETOP_MAC_CFG 0x11840
#define LTQ_ETOP_ENETS0 0x11850
#define LTQ_ETOP_MAC_DA0 0x1186C
#define LTQ_ETOP_MAC_DA1 0x11870
-#define LTQ_ETOP_CFG 0x16020
-#define LTQ_ETOP_IGPLEN 0x16080
+
+#define MAC_CFG_MASK 0xfff
+#define MAC_CFG_CGEN (1 << 11)
+#define MAC_CFG_DUPLEX (1 << 2)
+#define MAC_CFG_SPEED (1 << 1)
+#define MAC_CFG_LINK (1 << 0)
#define MAX_DMA_CHAN 0x8
#define MAX_DMA_CRC_LEN 0x4
#define MAX_DMA_DATA_LEN 0x600
#define ETOP_FTCU BIT(28)
-#define ETOP_MII_MASK 0xf
-#define ETOP_MII_NORMAL 0xd
-#define ETOP_MII_REVERSE 0xe
#define ETOP_PLEN_UNDER 0x40
-#define ETOP_CGEN 0x800
+#define ETOP_CFG_MII0 0x01
-/* use 2 static channels for TX/RX */
-#define LTQ_ETOP_TX_CHANNEL 1
-#define LTQ_ETOP_RX_CHANNEL 6
-#define IS_TX(x) (x == LTQ_ETOP_TX_CHANNEL)
-#define IS_RX(x) (x == LTQ_ETOP_RX_CHANNEL)
+#define ETOP_CFG_MASK 0xfff
+#define ETOP_CFG_FEN0 (1 << 8)
+#define ETOP_CFG_SEN0 (1 << 6)
+#define ETOP_CFG_OFF1 (1 << 3)
+#define ETOP_CFG_REMII0 (1 << 1)
+#define ETOP_CFG_OFF0 (1 << 0)
+
+#define LTQ_GBIT_MDIO_CTL 0xCC
+#define LTQ_GBIT_MDIO_DATA 0xd0
+#define LTQ_GBIT_GCTL0 0x68
+#define LTQ_GBIT_PMAC_HD_CTL 0x8c
+#define LTQ_GBIT_P0_CTL 0x4
+#define LTQ_GBIT_PMAC_RX_IPG 0xa8
+#define LTQ_GBIT_RGMII_CTL 0x78
+
+#define PMAC_HD_CTL_AS (1 << 19)
+#define PMAC_HD_CTL_RXSH (1 << 22)
+
+/* Switch Enable (0=disable, 1=enable) */
+#define GCTL0_SE 0x80000000
+/* Disable MDIO auto polling (0=disable, 1=enable) */
+#define PX_CTL_DMDIO 0x00400000
+
+/* MDC clock divider, clock = 25MHz/((MDC_CLOCK + 1) * 2) */
+#define MDC_CLOCK_MASK 0xff000000
+#define MDC_CLOCK_OFFSET 24
+
+/* register information for the gbit's MDIO bus */
+#define MDIO_XR9_REQUEST 0x00008000
+#define MDIO_XR9_READ 0x00000800
+#define MDIO_XR9_WRITE 0x00000400
+#define MDIO_XR9_REG_MASK 0x1f
+#define MDIO_XR9_ADDR_MASK 0x1f
+#define MDIO_XR9_RD_MASK 0xffff
+#define MDIO_XR9_REG_OFFSET 0
+#define MDIO_XR9_ADDR_OFFSET 5
+#define MDIO_XR9_WR_OFFSET 16
+#define LTQ_DMA_ETOP ((of_machine_is_compatible("lantiq,ase")) ? \
+ (INT_NUM_IM3_IRL0) : (INT_NUM_IM2_IRL0))
+
+/* the newer xway socks have a embedded 3/7 port gbit multiplexer */
#define ltq_etop_r32(x) ltq_r32(ltq_etop_membase + (x))
#define ltq_etop_w32(x, y) ltq_w32(x, ltq_etop_membase + (y))
#define ltq_etop_w32_mask(x, y, z) \
ltq_w32_mask(x, y, ltq_etop_membase + (z))
-#define DRV_VERSION "1.0"
+#define ltq_gbit_r32(x) ltq_r32(ltq_gbit_membase + (x))
+#define ltq_gbit_w32(x, y) ltq_w32(x, ltq_gbit_membase + (y))
+#define ltq_gbit_w32_mask(x, y, z) \
+ ltq_w32_mask(x, y, ltq_gbit_membase + (z))
+
+#define DRV_VERSION "1.2"
static void __iomem *ltq_etop_membase;
+static void __iomem *ltq_gbit_membase;
struct ltq_etop_chan {
- int idx;
int tx_free;
+ int irq;
struct net_device *netdev;
struct napi_struct napi;
struct ltq_dma_channel dma;
@@ -98,21 +150,34 @@ struct ltq_etop_chan {
struct ltq_etop_priv {
struct net_device *netdev;
struct platform_device *pdev;
- struct ltq_eth_data *pldata;
struct resource *res;
struct mii_bus *mii_bus;
- struct ltq_etop_chan ch[MAX_DMA_CHAN];
- int tx_free[MAX_DMA_CHAN >> 1];
+ struct ltq_etop_chan txch;
+ struct ltq_etop_chan rxch;
+
+ int tx_irq;
+ int rx_irq;
+
+ unsigned char mac[6];
+ int mii_mode;
spinlock_t lock;
+
+ struct clk *clk_ppe;
+ struct clk *clk_switch;
+ struct clk *clk_ephy;
+ struct clk *clk_ephycgu;
};
+static int ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr,
+ int phy_reg, u16 phy_data);
+
static int
ltq_etop_alloc_skb(struct ltq_etop_chan *ch)
{
- ch->skb[ch->dma.desc] = netdev_alloc_skb(ch->netdev, MAX_DMA_DATA_LEN);
+ ch->skb[ch->dma.desc] = dev_alloc_skb(MAX_DMA_DATA_LEN);
if (!ch->skb[ch->dma.desc])
return -ENOMEM;
ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(NULL,
@@ -147,8 +212,11 @@ ltq_etop_hw_receive(struct ltq_etop_chan
spin_unlock_irqrestore(&priv->lock, flags);
skb_put(skb, len);
+ skb->dev = ch->netdev;
skb->protocol = eth_type_trans(skb, ch->netdev);
netif_receive_skb(skb);
+ ch->netdev->stats.rx_packets++;
+ ch->netdev->stats.rx_bytes += len;
}
static int
@@ -156,7 +224,9 @@ ltq_etop_poll_rx(struct napi_struct *nap
{
struct ltq_etop_chan *ch = container_of(napi,
struct ltq_etop_chan, napi);
+ struct ltq_etop_priv *priv = netdev_priv(ch->netdev);
int work_done = 0;
+ unsigned long flags;
while (work_done < budget) {
struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
@@ -168,7 +238,9 @@ ltq_etop_poll_rx(struct napi_struct *nap
}
if (work_done < budget) {
napi_complete_done(&ch->napi, work_done);
+ spin_lock_irqsave(&priv->lock, flags);
ltq_dma_ack_irq(&ch->dma);
+ spin_unlock_irqrestore(&priv->lock, flags);
}
return work_done;
}
@@ -180,12 +252,14 @@ ltq_etop_poll_tx(struct napi_struct *nap
container_of(napi, struct ltq_etop_chan, napi);
struct ltq_etop_priv *priv = netdev_priv(ch->netdev);
struct netdev_queue *txq =
- netdev_get_tx_queue(ch->netdev, ch->idx >> 1);
+ netdev_get_tx_queue(ch->netdev, ch->dma.nr >> 1);
unsigned long flags;
spin_lock_irqsave(&priv->lock, flags);
while ((ch->dma.desc_base[ch->tx_free].ctl &
(LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
+ ch->netdev->stats.tx_packets++;
+ ch->netdev->stats.tx_bytes += ch->skb[ch->tx_free]->len;
dev_kfree_skb_any(ch->skb[ch->tx_free]);
ch->skb[ch->tx_free] = NULL;
memset(&ch->dma.desc_base[ch->tx_free], 0,
@@ -198,7 +272,9 @@ ltq_etop_poll_tx(struct napi_struct *nap
if (netif_tx_queue_stopped(txq))
netif_tx_start_queue(txq);
napi_complete(&ch->napi);
+ spin_lock_irqsave(&priv->lock, flags);
ltq_dma_ack_irq(&ch->dma);
+ spin_unlock_irqrestore(&priv->lock, flags);
return 1;
}
@@ -206,9 +282,10 @@ static irqreturn_t
ltq_etop_dma_irq(int irq, void *_priv)
{
struct ltq_etop_priv *priv = _priv;
- int ch = irq - LTQ_DMA_CH0_INT;
-
- napi_schedule(&priv->ch[ch].napi);
+ if (irq == priv->txch.dma.irq)
+ napi_schedule(&priv->txch.napi);
+ else
+ napi_schedule(&priv->rxch.napi);
return IRQ_HANDLED;
}
@@ -220,7 +297,7 @@ ltq_etop_free_channel(struct net_device
ltq_dma_free(&ch->dma);
if (ch->dma.irq)
free_irq(ch->dma.irq, priv);
- if (IS_RX(ch->idx)) {
+ if (ch == &priv->txch) {
int desc;
for (desc = 0; desc < LTQ_DESC_NUM; desc++)
dev_kfree_skb_any(ch->skb[ch->dma.desc]);
@@ -231,65 +308,133 @@ static void
ltq_etop_hw_exit(struct net_device *dev)
{
struct ltq_etop_priv *priv = netdev_priv(dev);
- int i;
- ltq_pmu_disable(PMU_PPE);
- for (i = 0; i < MAX_DMA_CHAN; i++)
- if (IS_TX(i) || IS_RX(i))
- ltq_etop_free_channel(dev, &priv->ch[i]);
+ clk_disable(priv->clk_ppe);
+
+ if (of_machine_is_compatible("lantiq,ar9"))
+ clk_disable(priv->clk_switch);
+
+ if (of_machine_is_compatible("lantiq,ase")) {
+ clk_disable(priv->clk_ephy);
+ clk_disable(priv->clk_ephycgu);
+ }
+
+ ltq_etop_free_channel(dev, &priv->txch);
+ ltq_etop_free_channel(dev, &priv->rxch);
+}
+
+static void
+ltq_etop_gbit_init(struct net_device *dev)
+{
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+
+ clk_enable(priv->clk_switch);
+
+ /* enable gbit port0 on the SoC */
+ ltq_gbit_w32_mask((1 << 17), (1 << 18), LTQ_GBIT_P0_CTL);
+
+ ltq_gbit_w32_mask(0, GCTL0_SE, LTQ_GBIT_GCTL0);
+ /* disable MDIO auto polling mode */
+ ltq_gbit_w32_mask(0, PX_CTL_DMDIO, LTQ_GBIT_P0_CTL);
+ /* set 1522 packet size */
+ ltq_gbit_w32_mask(0x300, 0, LTQ_GBIT_GCTL0);
+ /* disable pmac & dmac headers */
+ ltq_gbit_w32_mask(PMAC_HD_CTL_AS | PMAC_HD_CTL_RXSH, 0,
+ LTQ_GBIT_PMAC_HD_CTL);
+ /* Due to traffic halt when burst length 8,
+ replace default IPG value with 0x3B */
+ ltq_gbit_w32(0x3B, LTQ_GBIT_PMAC_RX_IPG);
+ /* set mdc clock to 2.5 MHz */
+ ltq_gbit_w32_mask(MDC_CLOCK_MASK, 4 << MDC_CLOCK_OFFSET,
+ LTQ_GBIT_RGMII_CTL);
}
static int
ltq_etop_hw_init(struct net_device *dev)
{
struct ltq_etop_priv *priv = netdev_priv(dev);
- int i;
+ int mii_mode = priv->mii_mode;
+
+ clk_enable(priv->clk_ppe);
- ltq_pmu_enable(PMU_PPE);
+ if (of_machine_is_compatible("lantiq,ar9")) {
+ ltq_etop_gbit_init(dev);
+ /* force the etops link to the gbit to MII */
+ mii_mode = PHY_INTERFACE_MODE_MII;
+ }
+ ltq_etop_w32_mask(MDIO_CFG_MASK, 0, LTQ_ETOP_MDIO_CFG);
+ ltq_etop_w32_mask(MAC_CFG_MASK, MAC_CFG_CGEN | MAC_CFG_DUPLEX |
+ MAC_CFG_SPEED | MAC_CFG_LINK, LTQ_ETOP_MAC_CFG);
- switch (priv->pldata->mii_mode) {
+ switch (mii_mode) {
case PHY_INTERFACE_MODE_RMII:
- ltq_etop_w32_mask(ETOP_MII_MASK,
- ETOP_MII_REVERSE, LTQ_ETOP_CFG);
+ ltq_etop_w32_mask(ETOP_CFG_MASK, ETOP_CFG_REMII0 | ETOP_CFG_OFF1 |
+ ETOP_CFG_SEN0 | ETOP_CFG_FEN0, LTQ_ETOP_CFG);
break;
case PHY_INTERFACE_MODE_MII:
- ltq_etop_w32_mask(ETOP_MII_MASK,
- ETOP_MII_NORMAL, LTQ_ETOP_CFG);
+ ltq_etop_w32_mask(ETOP_CFG_MASK, ETOP_CFG_OFF1 |
+ ETOP_CFG_SEN0 | ETOP_CFG_FEN0, LTQ_ETOP_CFG);
break;
default:
+ if (of_machine_is_compatible("lantiq,ase")) {
+ clk_enable(priv->clk_ephy);
+ /* disable external MII */
+ ltq_etop_w32_mask(0, ETOP_CFG_MII0, LTQ_ETOP_CFG);
+ /* enable clock for internal PHY */
+ clk_enable(priv->clk_ephycgu);
+ /* we need to write this magic to the internal phy to
+ make it work */
+ ltq_etop_mdio_wr(NULL, 0x8, 0x12, 0xC020);
+ pr_info("Selected EPHY mode\n");
+ break;
+ }
netdev_err(dev, "unknown mii mode %d\n",
- priv->pldata->mii_mode);
+ mii_mode);
return -ENOTSUPP;
}
- /* enable crc generation */
- ltq_etop_w32(PPE32_CGEN, LQ_PPE32_ENET_MAC_CFG);
+ return 0;
+}
+
+static int
+ltq_etop_dma_init(struct net_device *dev)
+{
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+ int tx = priv->tx_irq - LTQ_DMA_ETOP;
+ int rx = priv->rx_irq - LTQ_DMA_ETOP;
+ int err;
ltq_dma_init_port(DMA_PORT_ETOP);
- for (i = 0; i < MAX_DMA_CHAN; i++) {
- int irq = LTQ_DMA_CH0_INT + i;
- struct ltq_etop_chan *ch = &priv->ch[i];
-
- ch->idx = ch->dma.nr = i;
-
- if (IS_TX(i)) {
- ltq_dma_alloc_tx(&ch->dma);
- request_irq(irq, ltq_etop_dma_irq, 0, "etop_tx", priv);
- } else if (IS_RX(i)) {
- ltq_dma_alloc_rx(&ch->dma);
- for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM;
- ch->dma.desc++)
- if (ltq_etop_alloc_skb(ch))
- return -ENOMEM;
- ch->dma.desc = 0;
- request_irq(irq, ltq_etop_dma_irq, 0, "etop_rx", priv);
+ priv->txch.dma.nr = tx;
+ ltq_dma_alloc_tx(&priv->txch.dma);
+ err = request_irq(priv->tx_irq, ltq_etop_dma_irq, 0, "eth_tx", priv);
+ if (err) {
+ netdev_err(dev, "failed to allocate tx irq\n");
+ goto err_out;
+ }
+ priv->txch.dma.irq = priv->tx_irq;
+
+ priv->rxch.dma.nr = rx;
+ ltq_dma_alloc_rx(&priv->rxch.dma);
+ for (priv->rxch.dma.desc = 0; priv->rxch.dma.desc < LTQ_DESC_NUM;
+ priv->rxch.dma.desc++) {
+ if (ltq_etop_alloc_skb(&priv->rxch)) {
+ netdev_err(dev, "failed to allocate skbs\n");
+ err = -ENOMEM;
+ goto err_out;
}
- ch->dma.irq = irq;
}
- return 0;
+ priv->rxch.dma.desc = 0;
+ err = request_irq(priv->rx_irq, ltq_etop_dma_irq, 0, "eth_rx", priv);
+ if (err)
+ netdev_err(dev, "failed to allocate rx irq\n");
+ else
+ priv->rxch.dma.irq = priv->rx_irq;
+err_out:
+ return err;
}
static void
@@ -303,7 +448,10 @@ ltq_etop_get_drvinfo(struct net_device *
static int
ltq_etop_nway_reset(struct net_device *dev)
{
- return phy_start_aneg(dev->phydev);
+ if (dev->phydev)
+ return phy_start_aneg(dev->phydev);
+ else
+ return 0;
}
static const struct ethtool_ops ltq_etop_ethtool_ops = {
@@ -314,6 +462,39 @@ static const struct ethtool_ops ltq_etop
};
static int
+ltq_etop_mdio_wr_xr9(struct mii_bus *bus, int phy_addr,
+ int phy_reg, u16 phy_data)
+{
+ u32 val = MDIO_XR9_REQUEST | MDIO_XR9_WRITE |
+ (phy_data << MDIO_XR9_WR_OFFSET) |
+ ((phy_addr & MDIO_XR9_ADDR_MASK) << MDIO_XR9_ADDR_OFFSET) |
+ ((phy_reg & MDIO_XR9_REG_MASK) << MDIO_XR9_REG_OFFSET);
+
+ while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST)
+ ;
+ ltq_gbit_w32(val, LTQ_GBIT_MDIO_CTL);
+ while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST)
+ ;
+ return 0;
+}
+
+static int
+ltq_etop_mdio_rd_xr9(struct mii_bus *bus, int phy_addr, int phy_reg)
+{
+ u32 val = MDIO_XR9_REQUEST | MDIO_XR9_READ |
+ ((phy_addr & MDIO_XR9_ADDR_MASK) << MDIO_XR9_ADDR_OFFSET) |
+ ((phy_reg & MDIO_XR9_REG_MASK) << MDIO_XR9_REG_OFFSET);
+
+ while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST)
+ ;
+ ltq_gbit_w32(val, LTQ_GBIT_MDIO_CTL);
+ while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST)
+ ;
+ val = ltq_gbit_r32(LTQ_GBIT_MDIO_DATA) & MDIO_XR9_RD_MASK;
+ return val;
+}
+
+static int
ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr, int phy_reg, u16 phy_data)
{
u32 val = MDIO_REQUEST |
@@ -321,9 +502,9 @@ ltq_etop_mdio_wr(struct mii_bus *bus, in
((phy_reg & MDIO_REG_MASK) << MDIO_REG_OFFSET) |
phy_data;
- while (ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_REQUEST)
+ while (ltq_etop_r32(LTQ_ETOP_MDIO_ACC) & MDIO_REQUEST)
;
- ltq_etop_w32(val, LTQ_ETOP_MDIO);
+ ltq_etop_w32(val, LTQ_ETOP_MDIO_ACC);
return 0;
}
@@ -334,12 +515,12 @@ ltq_etop_mdio_rd(struct mii_bus *bus, in
((phy_addr & MDIO_ADDR_MASK) << MDIO_ADDR_OFFSET) |
((phy_reg & MDIO_REG_MASK) << MDIO_REG_OFFSET);
- while (ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_REQUEST)
+ while (ltq_etop_r32(LTQ_ETOP_MDIO_ACC) & MDIO_REQUEST)
;
- ltq_etop_w32(val, LTQ_ETOP_MDIO);
- while (ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_REQUEST)
+ ltq_etop_w32(val, LTQ_ETOP_MDIO_ACC);
+ while (ltq_etop_r32(LTQ_ETOP_MDIO_ACC) & MDIO_REQUEST)
;
- val = ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_VAL_MASK;
+ val = ltq_etop_r32(LTQ_ETOP_MDIO_ACC) & MDIO_VAL_MASK;
return val;
}
@@ -354,8 +535,18 @@ ltq_etop_mdio_probe(struct net_device *d
{
struct ltq_etop_priv *priv = netdev_priv(dev);
struct phy_device *phydev;
+ u32 phy_supported = (SUPPORTED_10baseT_Half
+ | SUPPORTED_10baseT_Full
+ | SUPPORTED_100baseT_Half
+ | SUPPORTED_100baseT_Full
+ | SUPPORTED_Autoneg
+ | SUPPORTED_MII
+ | SUPPORTED_TP);
- phydev = phy_find_first(priv->mii_bus);
+ if (of_machine_is_compatible("lantiq,ase"))
+ phydev = mdiobus_get_phy(priv->mii_bus, 8);
+ else
+ phydev = mdiobus_get_phy(priv->mii_bus, 0);
if (!phydev) {
netdev_err(dev, "no PHY found\n");
@@ -363,21 +554,18 @@ ltq_etop_mdio_probe(struct net_device *d
}
phydev = phy_connect(dev, phydev_name(phydev),
- &ltq_etop_mdio_link, priv->pldata->mii_mode);
+ &ltq_etop_mdio_link, priv->mii_mode);
if (IS_ERR(phydev)) {
netdev_err(dev, "Could not attach to PHY\n");
return PTR_ERR(phydev);
}
- phydev->supported &= (SUPPORTED_10baseT_Half
- | SUPPORTED_10baseT_Full
- | SUPPORTED_100baseT_Half
- | SUPPORTED_100baseT_Full
- | SUPPORTED_Autoneg
- | SUPPORTED_MII
- | SUPPORTED_TP);
+ if (of_machine_is_compatible("lantiq,ar9"))
+ phy_supported |= SUPPORTED_1000baseT_Half
+ | SUPPORTED_1000baseT_Full;
+ phydev->supported &= phy_supported;
phydev->advertising = phydev->supported;
phy_attached_info(phydev);
@@ -398,8 +586,13 @@ ltq_etop_mdio_init(struct net_device *de
}
priv->mii_bus->priv = dev;
- priv->mii_bus->read = ltq_etop_mdio_rd;
- priv->mii_bus->write = ltq_etop_mdio_wr;
+ if (of_machine_is_compatible("lantiq,ar9")) {
+ priv->mii_bus->read = ltq_etop_mdio_rd_xr9;
+ priv->mii_bus->write = ltq_etop_mdio_wr_xr9;
+ } else {
+ priv->mii_bus->read = ltq_etop_mdio_rd;
+ priv->mii_bus->write = ltq_etop_mdio_wr;
+ }
priv->mii_bus->name = "ltq_mii";
snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
priv->pdev->name, priv->pdev->id);
@@ -436,17 +629,19 @@ static int
ltq_etop_open(struct net_device *dev)
{
struct ltq_etop_priv *priv = netdev_priv(dev);
- int i;
+ unsigned long flags;
- for (i = 0; i < MAX_DMA_CHAN; i++) {
- struct ltq_etop_chan *ch = &priv->ch[i];
+ napi_enable(&priv->txch.napi);
+ napi_enable(&priv->rxch.napi);
+
+ spin_lock_irqsave(&priv->lock, flags);
+ ltq_dma_open(&priv->txch.dma);
+ ltq_dma_open(&priv->rxch.dma);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ if (dev->phydev)
+ phy_start(dev->phydev);
- if (!IS_TX(i) && (!IS_RX(i)))
- continue;
- ltq_dma_open(&ch->dma);
- napi_enable(&ch->napi);
- }
- phy_start(dev->phydev);
netif_tx_start_all_queues(dev);
return 0;
}
@@ -455,18 +650,19 @@ static int
ltq_etop_stop(struct net_device *dev)
{
struct ltq_etop_priv *priv = netdev_priv(dev);
- int i;
+ unsigned long flags;
netif_tx_stop_all_queues(dev);
- phy_stop(dev->phydev);
- for (i = 0; i < MAX_DMA_CHAN; i++) {
- struct ltq_etop_chan *ch = &priv->ch[i];
-
- if (!IS_RX(i) && !IS_TX(i))
- continue;
- napi_disable(&ch->napi);
- ltq_dma_close(&ch->dma);
- }
+ if (dev->phydev)
+ phy_stop(dev->phydev);
+ napi_disable(&priv->txch.napi);
+ napi_disable(&priv->rxch.napi);
+
+ spin_lock_irqsave(&priv->lock, flags);
+ ltq_dma_close(&priv->txch.dma);
+ ltq_dma_close(&priv->rxch.dma);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
return 0;
}
@@ -476,16 +672,16 @@ ltq_etop_tx(struct sk_buff *skb, struct
int queue = skb_get_queue_mapping(skb);
struct netdev_queue *txq = netdev_get_tx_queue(dev, queue);
struct ltq_etop_priv *priv = netdev_priv(dev);
- struct ltq_etop_chan *ch = &priv->ch[(queue << 1) | 1];
- struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
- int len;
+ struct ltq_dma_desc *desc =
+ &priv->txch.dma.desc_base[priv->txch.dma.desc];
unsigned long flags;
u32 byte_offset;
+ int len;
len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
- if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ch->skb[ch->dma.desc]) {
- dev_kfree_skb_any(skb);
+ if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) ||
+ priv->txch.skb[priv->txch.dma.desc]) {
netdev_err(dev, "tx ring full\n");
netif_tx_stop_queue(txq);
return NETDEV_TX_BUSY;
@@ -493,7 +689,7 @@ ltq_etop_tx(struct sk_buff *skb, struct
/* dma needs to start on a 16 byte aligned address */
byte_offset = CPHYSADDR(skb->data) % 16;
- ch->skb[ch->dma.desc] = skb;
+ priv->txch.skb[priv->txch.dma.desc] = skb;
netif_trans_update(dev);
@@ -503,11 +699,11 @@ ltq_etop_tx(struct sk_buff *skb, struct
wmb();
desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP |
LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK);
- ch->dma.desc++;
- ch->dma.desc %= LTQ_DESC_NUM;
+ priv->txch.dma.desc++;
+ priv->txch.dma.desc %= LTQ_DESC_NUM;
spin_unlock_irqrestore(&priv->lock, flags);
- if (ch->dma.desc_base[ch->dma.desc].ctl & LTQ_DMA_OWN)
+ if (priv->txch.dma.desc_base[priv->txch.dma.desc].ctl & LTQ_DMA_OWN)
netif_tx_stop_queue(txq);
return NETDEV_TX_OK;
@@ -522,8 +718,10 @@ ltq_etop_change_mtu(struct net_device *d
struct ltq_etop_priv *priv = netdev_priv(dev);
unsigned long flags;
+ int max = ETH_HLEN + VLAN_HLEN + new_mtu + ETH_FCS_LEN;
+
spin_lock_irqsave(&priv->lock, flags);
- ltq_etop_w32((ETOP_PLEN_UNDER << 16) | new_mtu,
+ ltq_etop_w32((ETOP_PLEN_UNDER << 16) | max,
LTQ_ETOP_IGPLEN);
spin_unlock_irqrestore(&priv->lock, flags);
}
@@ -592,6 +790,9 @@ ltq_etop_init(struct net_device *dev)
if (err)
goto err_hw;
ltq_etop_change_mtu(dev, 1500);
+ err = ltq_etop_dma_init(dev);
+ if (err)
+ goto err_hw;
memcpy(&mac, &priv->pldata->mac, sizeof(struct sockaddr));
if (!is_valid_ether_addr(mac.sa_data)) {
@@ -609,9 +810,10 @@ ltq_etop_init(struct net_device *dev)
dev->addr_assign_type = NET_ADDR_RANDOM;
ltq_etop_set_multicast_list(dev);
- err = ltq_etop_mdio_init(dev);
- if (err)
- goto err_netdev;
+ if (!ltq_etop_mdio_init(dev))
+ dev->ethtool_ops = &ltq_etop_ethtool_ops;
+ else
+ pr_warn("etop: mdio probe failed\n");;
return 0;
err_netdev:
@@ -631,6 +833,9 @@ ltq_etop_tx_timeout(struct net_device *d
err = ltq_etop_hw_init(dev);
if (err)
goto err_hw;
+ err = ltq_etop_dma_init(dev);
+ if (err)
+ goto err_hw;
netif_trans_update(dev);
netif_wake_queue(dev);
return;
@@ -654,14 +859,19 @@ static const struct net_device_ops ltq_e
.ndo_tx_timeout = ltq_etop_tx_timeout,
};
-static int __init
-ltq_etop_probe(struct platform_device *pdev)
+static int ltq_etop_probe(struct platform_device *pdev)
{
struct net_device *dev;
struct ltq_etop_priv *priv;
- struct resource *res;
+ struct resource *res, *gbit_res, irqres[2];
+ const u8 *mac;
int err;
- int i;
+
+ err = of_irq_to_resource_table(pdev->dev.of_node, irqres, 2);
+ if (err != 2) {
+ dev_err(&pdev->dev, "failed to get etop irqs\n");
+ return -EINVAL;
+ }
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
@@ -687,31 +897,62 @@ ltq_etop_probe(struct platform_device *p
goto err_out;
}
- dev = alloc_etherdev_mq(sizeof(struct ltq_etop_priv), 4);
- if (!dev) {
- err = -ENOMEM;
- goto err_out;
+ if (of_machine_is_compatible("lantiq,ar9")) {
+ gbit_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!gbit_res) {
+ dev_err(&pdev->dev, "failed to get gbit resource\n");
+ err = -ENOENT;
+ goto err_out;
+ }
+ ltq_gbit_membase = devm_ioremap_nocache(&pdev->dev,
+ gbit_res->start, resource_size(gbit_res));
+ if (!ltq_gbit_membase) {
+ dev_err(&pdev->dev, "failed to remap gigabit switch %d\n",
+ pdev->id);
+ err = -ENOMEM;
+ goto err_out;
+ }
}
+
+ dev = alloc_etherdev_mq(sizeof(struct ltq_etop_priv), 4);
strcpy(dev->name, "eth%d");
dev->netdev_ops = &ltq_eth_netdev_ops;
- dev->ethtool_ops = &ltq_etop_ethtool_ops;
priv = netdev_priv(dev);
priv->res = res;
priv->pdev = pdev;
- priv->pldata = dev_get_platdata(&pdev->dev);
priv->netdev = dev;
+ priv->tx_irq = irqres[0].start;
+ priv->rx_irq = irqres[1].start;
+ priv->mii_mode = of_get_phy_mode(pdev->dev.of_node);
+
+ mac = of_get_mac_address(pdev->dev.of_node);
+ if (mac)
+ memcpy(priv->mac, mac, ETH_ALEN);
+
+ priv->clk_ppe = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(priv->clk_ppe))
+ return PTR_ERR(priv->clk_ppe);
+ if (of_machine_is_compatible("lantiq,ar9")) {
+ priv->clk_switch = clk_get(&pdev->dev, "switch");
+ if (IS_ERR(priv->clk_switch))
+ return PTR_ERR(priv->clk_switch);
+ }
+ if (of_machine_is_compatible("lantiq,ase")) {
+ priv->clk_ephy = clk_get(&pdev->dev, "ephy");
+ if (IS_ERR(priv->clk_ephy))
+ return PTR_ERR(priv->clk_ephy);
+ priv->clk_ephycgu = clk_get(&pdev->dev, "ephycgu");
+ if (IS_ERR(priv->clk_ephycgu))
+ return PTR_ERR(priv->clk_ephycgu);
+ }
+
spin_lock_init(&priv->lock);
SET_NETDEV_DEV(dev, &pdev->dev);
- for (i = 0; i < MAX_DMA_CHAN; i++) {
- if (IS_TX(i))
- netif_napi_add(dev, &priv->ch[i].napi,
- ltq_etop_poll_tx, 8);
- else if (IS_RX(i))
- netif_napi_add(dev, &priv->ch[i].napi,
- ltq_etop_poll_rx, 32);
- priv->ch[i].netdev = dev;
- }
+ netif_napi_add(dev, &priv->txch.napi, ltq_etop_poll_tx, 8);
+ netif_napi_add(dev, &priv->rxch.napi, ltq_etop_poll_rx, 32);
+ priv->txch.netdev = dev;
+ priv->rxch.netdev = dev;
err = register_netdev(dev);
if (err)
@@ -740,31 +981,22 @@ ltq_etop_remove(struct platform_device *
return 0;
}
+static const struct of_device_id ltq_etop_match[] = {
+ { .compatible = "lantiq,etop-xway" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, ltq_etop_match);
+
static struct platform_driver ltq_mii_driver = {
+ .probe = ltq_etop_probe,
.remove = ltq_etop_remove,
.driver = {
.name = "ltq_etop",
+ .of_match_table = ltq_etop_match,
},
};
-int __init
-init_ltq_etop(void)
-{
- int ret = platform_driver_probe(&ltq_mii_driver, ltq_etop_probe);
-
- if (ret)
- pr_err("ltq_etop: Error registering platform driver!");
- return ret;
-}
-
-static void __exit
-exit_ltq_etop(void)
-{
- platform_driver_unregister(&ltq_mii_driver);
-}
-
-module_init(init_ltq_etop);
-module_exit(exit_ltq_etop);
+module_platform_driver(ltq_mii_driver);
MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
MODULE_DESCRIPTION("Lantiq SoC ETOP");

View file

@ -1,170 +0,0 @@
From cc809a441d8f2924f785eb863dfa6aef47a25b0b Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Tue, 12 Aug 2014 20:49:27 +0200
Subject: [PATCH 30/36] GPIO: add named gpio exports
Signed-off-by: John Crispin <blogic@openwrt.org>
---
drivers/gpio/gpiolib-of.c | 68 +++++++++++++++++++++++++++++++++++++++++
drivers/gpio/gpiolib.c | 11 +++++--
include/asm-generic/gpio.h | 5 +++
include/linux/gpio/consumer.h | 8 +++++
4 files changed, 90 insertions(+), 2 deletions(-)
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -23,6 +23,8 @@
#include <linux/pinctrl/pinctrl.h>
#include <linux/slab.h>
#include <linux/gpio/machine.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
#include "gpiolib.h"
@@ -538,3 +540,73 @@ void of_gpiochip_remove(struct gpio_chip
gpiochip_remove_pin_ranges(chip);
of_node_put(chip->of_node);
}
+
+#ifdef CONFIG_GPIO_SYSFS
+
+static struct of_device_id gpio_export_ids[] = {
+ { .compatible = "gpio-export" },
+ { /* sentinel */ }
+};
+
+static int __init of_gpio_export_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct device_node *cnp;
+ u32 val;
+ int nb = 0;
+
+ for_each_child_of_node(np, cnp) {
+ const char *name = NULL;
+ int gpio;
+ bool dmc;
+ int max_gpio = 1;
+ int i;
+
+ of_property_read_string(cnp, "gpio-export,name", &name);
+
+ if (!name)
+ max_gpio = of_gpio_count(cnp);
+
+ for (i = 0; i < max_gpio; i++) {
+ unsigned flags = 0;
+ enum of_gpio_flags of_flags;
+
+ gpio = of_get_gpio_flags(cnp, i, &of_flags);
+
+ if (of_flags == OF_GPIO_ACTIVE_LOW)
+ flags |= GPIOF_ACTIVE_LOW;
+
+ if (!of_property_read_u32(cnp, "gpio-export,output", &val))
+ flags |= val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
+ else
+ flags |= GPIOF_IN;
+
+ if (devm_gpio_request_one(&pdev->dev, gpio, flags, name ? name : of_node_full_name(np)))
+ continue;
+
+ dmc = of_property_read_bool(cnp, "gpio-export,direction_may_change");
+ gpio_export_with_name(gpio, dmc, name);
+ nb++;
+ }
+ }
+
+ dev_info(&pdev->dev, "%d gpio(s) exported\n", nb);
+
+ return 0;
+}
+
+static struct platform_driver gpio_export_driver = {
+ .driver = {
+ .name = "gpio-export",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(gpio_export_ids),
+ },
+};
+
+static int __init of_gpio_export_init(void)
+{
+ return platform_driver_probe(&gpio_export_driver, of_gpio_export_probe);
+}
+device_initcall(of_gpio_export_init);
+
+#endif
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
@@ -126,6 +126,12 @@ static inline int gpio_export(unsigned g
return gpiod_export(gpio_to_desc(gpio), direction_may_change);
}
+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
+static inline int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name)
+{
+ return __gpiod_export(gpio_to_desc(gpio), direction_may_change, name);
+}
+
static inline int gpio_export_link(struct device *dev, const char *name,
unsigned gpio)
{
--- a/include/linux/gpio/consumer.h
+++ b/include/linux/gpio/consumer.h
@@ -427,6 +427,7 @@ static inline struct gpio_desc *devm_get
#if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS)
+int _gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
int gpiod_export_link(struct device *dev, const char *name,
struct gpio_desc *desc);
@@ -434,6 +435,13 @@ void gpiod_unexport(struct gpio_desc *de
#else /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */
+static inline int _gpiod_export(struct gpio_desc *desc,
+ bool direction_may_change,
+ const char *name)
+{
+ return -ENOSYS;
+}
+
static inline int gpiod_export(struct gpio_desc *desc,
bool direction_may_change)
{
--- a/drivers/gpio/gpiolib-sysfs.c
+++ b/drivers/gpio/gpiolib-sysfs.c
@@ -544,7 +544,7 @@ static struct class gpio_class = {
*
* Returns zero on success, else an error.
*/
-int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name)
{
struct gpio_chip *chip;
struct gpio_device *gdev;
@@ -606,6 +606,8 @@ int gpiod_export(struct gpio_desc *desc,
offset = gpio_chip_hwgpio(desc);
if (chip->names && chip->names[offset])
ioname = chip->names[offset];
+ if (name)
+ ioname = name;
dev = device_create_with_groups(&gpio_class, &gdev->dev,
MKDEV(0, 0), data, gpio_groups,
@@ -627,6 +629,12 @@ err_unlock:
gpiod_dbg(desc, "%s: status %d\n", __func__, status);
return status;
}
+EXPORT_SYMBOL_GPL(__gpiod_export);
+
+int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
+{
+ return __gpiod_export(desc, direction_may_change, NULL);
+}
EXPORT_SYMBOL_GPL(gpiod_export);
static int match_export(struct device *dev, const void *desc)

View file

@ -1,219 +0,0 @@
From f8c5db89e793a4bc6c1e87bd7b3a5cec16b75bc3 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Wed, 10 Sep 2014 22:42:14 +0200
Subject: [PATCH 35/36] owrt: lantiq: wifi and ethernet eeprom handling
Signed-off-by: John Crispin <blogic@openwrt.org>
---
.../mips/include/asm/mach-lantiq/xway/lantiq_soc.h | 3 +
arch/mips/lantiq/xway/Makefile | 3 +
arch/mips/lantiq/xway/ath5k_eep.c | 136 +++++++++++++++++++++
arch/mips/lantiq/xway/eth_mac.c | 25 ++++
drivers/net/ethernet/lantiq_etop.c | 6 +-
5 files changed, 172 insertions(+), 1 deletion(-)
create mode 100644 arch/mips/lantiq/xway/ath5k_eep.c
create mode 100644 arch/mips/lantiq/xway/eth_mac.c
--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
@@ -104,5 +104,8 @@ int xrx200_gphy_boot(struct device *dev,
extern void ltq_pmu_enable(unsigned int module);
extern void ltq_pmu_disable(unsigned int module);
+/* allow the ethernet driver to load a flash mapped mac addr */
+const u8* ltq_get_eth_mac(void);
+
#endif /* CONFIG_SOC_TYPE_XWAY */
#endif /* _LTQ_XWAY_H__ */
--- a/arch/mips/lantiq/xway/Makefile
+++ b/arch/mips/lantiq/xway/Makefile
@@ -8,4 +8,7 @@ endif
obj-y += vmmc.o
+obj-y += eth_mac.o
+obj-$(CONFIG_PCI) += ath5k_eep.o
+
obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o
--- /dev/null
+++ b/arch/mips/lantiq/xway/ath5k_eep.c
@@ -0,0 +1,136 @@
+/*
+ * Copyright (C) 2011 Luca Olivetti <luca@ventoso.org>
+ * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
+ * Copyright (C) 2011 Andrej Vlašić <andrej.vlasic0@gmail.com>
+ * Copyright (C) 2013 Álvaro Fernández Rojas <noltari@gmail.com>
+ * Copyright (C) 2013 Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
+ * Copyright (C) 2015 Vittorio Gambaletta <openwrt@vittgam.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/etherdevice.h>
+#include <linux/ath5k_platform.h>
+#include <linux/pci.h>
+#include <linux/err.h>
+#include <linux/mtd/mtd.h>
+#include <lantiq_soc.h>
+
+extern int (*ltq_pci_plat_dev_init)(struct pci_dev *dev);
+struct ath5k_platform_data ath5k_pdata;
+static u8 athxk_eeprom_mac[6];
+
+static int ath5k_pci_plat_dev_init(struct pci_dev *dev)
+{
+ dev->dev.platform_data = &ath5k_pdata;
+ return 0;
+}
+
+static int ath5k_eep_load;
+int __init of_ath5k_eeprom_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node, *mtd_np = NULL;
+ int mac_offset;
+ u32 mac_inc = 0;
+ int i;
+ struct mtd_info *the_mtd;
+ size_t flash_readlen;
+ const __be32 *list;
+ const char *part;
+ phandle phandle;
+
+ list = of_get_property(np, "ath,eep-flash", &i);
+ if (!list || (i != (2 * sizeof(*list))))
+ return -ENODEV;
+
+ phandle = be32_to_cpup(list++);
+ if (phandle)
+ mtd_np = of_find_node_by_phandle(phandle);
+
+ if (!mtd_np)
+ return -ENODEV;
+
+ part = of_get_property(mtd_np, "label", NULL);
+ if (!part)
+ part = mtd_np->name;
+
+ the_mtd = get_mtd_device_nm(part);
+ if (IS_ERR(the_mtd))
+ return -ENODEV;
+
+ ath5k_pdata.eeprom_data = kmalloc(ATH5K_PLAT_EEP_MAX_WORDS<<1, GFP_KERNEL);
+
+ i = mtd_read(the_mtd, be32_to_cpup(list), ATH5K_PLAT_EEP_MAX_WORDS << 1,
+ &flash_readlen, (void *) ath5k_pdata.eeprom_data);
+
+ if (!of_property_read_u32(np, "ath,mac-offset", &mac_offset)) {
+ size_t mac_readlen;
+ mtd_read(the_mtd, mac_offset, 6, &mac_readlen,
+ (void *) athxk_eeprom_mac);
+ }
+ put_mtd_device(the_mtd);
+
+ if (((ATH5K_PLAT_EEP_MAX_WORDS<<1) != flash_readlen) || i) {
+ dev_err(&pdev->dev, "failed to load eeprom from mtd\n");
+ return -ENODEV;
+ }
+
+ if (of_find_property(np, "ath,eep-swap", NULL))
+ for (i = 0; i < ATH5K_PLAT_EEP_MAX_WORDS; i++)
+ ath5k_pdata.eeprom_data[i] = swab16(ath5k_pdata.eeprom_data[i]);
+
+ if (!is_valid_ether_addr(athxk_eeprom_mac) && ltq_get_eth_mac())
+ ether_addr_copy(athxk_eeprom_mac, ltq_get_eth_mac());
+
+ if (!is_valid_ether_addr(athxk_eeprom_mac)) {
+ dev_warn(&pdev->dev, "using random mac\n");
+ random_ether_addr(athxk_eeprom_mac);
+ }
+
+ if (!of_property_read_u32(np, "ath,mac-increment", &mac_inc))
+ athxk_eeprom_mac[5] += mac_inc;
+
+ ath5k_pdata.macaddr = athxk_eeprom_mac;
+ ltq_pci_plat_dev_init = ath5k_pci_plat_dev_init;
+
+ dev_info(&pdev->dev, "loaded ath5k eeprom\n");
+
+ return 0;
+}
+
+static struct of_device_id ath5k_eeprom_ids[] = {
+ { .compatible = "ath5k,eeprom" },
+ { }
+};
+
+static struct platform_driver ath5k_eeprom_driver = {
+ .driver = {
+ .name = "ath5k,eeprom",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(ath5k_eeprom_ids),
+ },
+};
+
+static int __init of_ath5k_eeprom_init(void)
+{
+ int ret = platform_driver_probe(&ath5k_eeprom_driver, of_ath5k_eeprom_probe);
+
+ if (ret)
+ ath5k_eep_load = 1;
+
+ return ret;
+}
+
+static int __init of_ath5k_eeprom_init_late(void)
+{
+ if (!ath5k_eep_load)
+ return 0;
+
+ return platform_driver_probe(&ath5k_eeprom_driver, of_ath5k_eeprom_probe);
+}
+late_initcall(of_ath5k_eeprom_init_late);
+subsys_initcall(of_ath5k_eeprom_init);
--- /dev/null
+++ b/arch/mips/lantiq/xway/eth_mac.c
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/if_ether.h>
+
+static u8 eth_mac[6];
+static int eth_mac_set;
+
+const u8* ltq_get_eth_mac(void)
+{
+ return eth_mac;
+}
+
+static int __init setup_ethaddr(char *str)
+{
+ eth_mac_set = mac_pton(str, eth_mac);
+ return !eth_mac_set;
+}
+early_param("ethaddr", setup_ethaddr);
--- a/drivers/net/ethernet/lantiq_etop.c
+++ b/drivers/net/ethernet/lantiq_etop.c
@@ -794,7 +794,11 @@ ltq_etop_init(struct net_device *dev)
if (err)
goto err_hw;
- memcpy(&mac, &priv->pldata->mac, sizeof(struct sockaddr));
+ memcpy(&mac.sa_data, ltq_get_eth_mac(), ETH_ALEN);
+
+ if (priv->mac && !is_valid_ether_addr(mac.sa_data))
+ memcpy(&mac.sa_data, priv->mac, ETH_ALEN);
+
if (!is_valid_ether_addr(mac.sa_data)) {
pr_warn("etop: invalid MAC, using random\n");
eth_random_addr(mac.sa_data);

View file

@ -1,35 +0,0 @@
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -42,6 +42,7 @@
#include <linux/dma-mapping.h>
#include <linux/of_device.h>
#include <linux/mutex.h>
+#include <linux/of_gpio.h>
#include <linux/platform_device.h>
#include <linux/phy/phy.h>
#include <linux/platform_data/s3c-hsotg.h>
@@ -544,6 +545,7 @@ static int dwc2_driver_probe(struct plat
struct dwc2_hsotg *hsotg;
struct resource *res;
int retval;
+ int gpio_count;
match = of_match_device(dwc2_of_match_table, &dev->dev);
if (match && match->data) {
@@ -562,6 +564,16 @@ static int dwc2_driver_probe(struct plat
defparams.dma_desc_fs_enable = 0;
}
+ gpio_count = of_gpio_count(dev->dev.of_node);
+ while (gpio_count > 0) {
+ enum of_gpio_flags flags;
+ int gpio = of_get_gpio_flags(dev->dev.of_node, --gpio_count, &flags);
+ if (gpio_request(gpio, "usb"))
+ continue;
+ dev_info(&dev->dev, "requested GPIO %d\n", gpio);
+ gpio_direction_output(gpio, (flags & OF_GPIO_ACTIVE_LOW) ? (0) : (1));
+ }
+
hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL);
if (!hsotg)
return -ENOMEM;

View file

@ -1,23 +0,0 @@
From 9807eb80a1b3bad7a4a89aa6566497bb1cadd6ef Mon Sep 17 00:00:00 2001
From: John Crispin <john@phrozen.org>
Date: Fri, 3 Jun 2016 13:12:20 +0200
Subject: [PATCH] arch: mips: increase io_space_limit
this value comes from x86 and breaks some pci devices
Signed-off-by: John Crispin <john@phrozen.org>
---
arch/mips/include/asm/io.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/mips/include/asm/io.h
+++ b/arch/mips/include/asm/io.h
@@ -50,7 +50,7 @@
/* ioswab[bwlq], __mem_ioswab[bwlq] are defined in mangle-port.h */
-#define IO_SPACE_LIMIT 0xffff
+#define IO_SPACE_LIMIT 0xffffffff
/*
* On MIPS I/O ports are memory mapped, so we access them using normal

View file

@ -1,11 +0,0 @@
--- a/drivers/pinctrl/pinctrl-xway.c
+++ b/drivers/pinctrl/pinctrl-xway.c
@@ -1028,7 +1028,7 @@ static const struct ltq_pin_group xrx200
GRP_MUX("spi_cs5", SPI, xrx200_pins_spi_cs5),
GRP_MUX("spi_cs6", SPI, xrx200_pins_spi_cs6),
GRP_MUX("usif uart_rx", USIF, xrx200_pins_usif_uart_rx),
- GRP_MUX("usif uart_rx", USIF, xrx200_pins_usif_uart_tx),
+ GRP_MUX("usif uart_tx", USIF, xrx200_pins_usif_uart_tx),
GRP_MUX("usif uart_rts", USIF, xrx200_pins_usif_uart_rts),
GRP_MUX("usif uart_cts", USIF, xrx200_pins_usif_uart_cts),
GRP_MUX("usif uart_dtr", USIF, xrx200_pins_usif_uart_dtr),

View file

@ -1,23 +0,0 @@
--- a/arch/mips/lantiq/xway/reset.c
+++ b/arch/mips/lantiq/xway/reset.c
@@ -301,12 +301,6 @@ static void ltq_machine_halt(void)
unreachable();
}
-static void ltq_machine_power_off(void)
-{
- local_irq_disable();
- unreachable();
-}
-
static void ltq_usb_init(void)
{
/* Power for USB cores 1 & 2 */
@@ -379,7 +373,6 @@ static int __init mips_reboot_setup(void
_machine_restart = ltq_machine_restart;
_machine_halt = ltq_machine_halt;
- pm_power_off = ltq_machine_power_off;
return 0;
}

View file

@ -1,87 +0,0 @@
From: Felix Fietkau <nbd@nbd.name>
Date: Thu, 19 Jan 2017 12:14:44 +0100
Subject: [PATCH] MIPS: Lantiq: Fix cascaded IRQ setup
With the IRQ stack changes integrated, the XRX200 devices started
emitting a constant stream of kernel messages like this:
[ 565.415310] Spurious IRQ: CAUSE=0x1100c300
This appears to be caused by IP0 firing for some reason without being
handled. Fix this by setting up IP2-6 as a proper chained IRQ handler and
calling do_IRQ for all MIPS CPU interrupts.
Cc: john@phrozen.org
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
--- a/arch/mips/lantiq/irq.c
+++ b/arch/mips/lantiq/irq.c
@@ -271,6 +271,11 @@ static void ltq_hw5_irqdispatch(void)
DEFINE_HWx_IRQDISPATCH(5)
#endif
+static void ltq_hw_irq_handler(struct irq_desc *desc)
+{
+ ltq_hw_irqdispatch(irq_desc_get_irq(desc) - 2);
+}
+
#ifdef CONFIG_MIPS_MT_SMP
void __init arch_init_ipiirq(int irq, struct irqaction *action)
{
@@ -315,23 +320,19 @@ static struct irqaction irq_call = {
asmlinkage void plat_irq_dispatch(void)
{
unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
- unsigned int i;
+ int irq;
- if ((MIPS_CPU_TIMER_IRQ == 7) && (pending & CAUSEF_IP7)) {
- do_IRQ(MIPS_CPU_TIMER_IRQ);
- goto out;
- } else {
- for (i = 0; i < MAX_IM; i++) {
- if (pending & (CAUSEF_IP2 << i)) {
- ltq_hw_irqdispatch(i);
- goto out;
- }
- }
+ if (!pending) {
+ spurious_interrupt();
+ return;
}
- pr_alert("Spurious IRQ: CAUSE=0x%08x\n", read_c0_status());
-out:
- return;
+ pending >>= CAUSEB_IP;
+ while (pending) {
+ irq = fls(pending) - 1;
+ do_IRQ(MIPS_CPU_IRQ_BASE + irq);
+ pending &= ~BIT(irq);
+ }
}
static int icu_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
@@ -356,11 +357,6 @@ static const struct irq_domain_ops irq_d
.map = icu_map,
};
-static struct irqaction cascade = {
- .handler = no_action,
- .name = "cascade",
-};
-
int __init icu_of_init(struct device_node *node, struct device_node *parent)
{
struct device_node *eiu_node;
@@ -392,7 +388,7 @@ int __init icu_of_init(struct device_nod
mips_cpu_irq_init();
for (i = 0; i < MAX_IM; i++)
- setup_irq(i + 2, &cascade);
+ irq_set_chained_handler(i + 2, ltq_hw_irq_handler);
if (cpu_has_vint) {
pr_info("Setting up vectored interrupts\n");

View file

@ -1,130 +0,0 @@
From de2cad82c4d0872066f83ce59462603852b47f03 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Fri, 6 Jan 2017 17:55:24 +0100
Subject: [PATCH 2/2] usb: dwc2: add support for other Lantiq SoCs
The size of the internal RAM of the DesignWare USB controller changed
between the different Lantiq SoCs. We have the following sizes:
Amazon + Danube: 8 KByte
Amazon SE + arx100: 2 KByte
xrx200 + xrx300: 2.5 KByte
For Danube SoC we do not provide the params and let the driver decide
to use sane defaults, for the Amazon SE and arx100 we use small fifos
and for the xrx200 and xrx300 SCs a little bit bigger periodic fifo.
The auto detection of max_transfer_size and max_packet_count should
work, so remove it.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
drivers/usb/dwc2/platform.c | 46 ++++++++++++++++++++++++++++++++++++++-------
1 file changed, 39 insertions(+), 7 deletions(-)
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -151,7 +151,38 @@ static const struct dwc2_core_params par
.hibernation = -1,
};
-static const struct dwc2_core_params params_ltq = {
+static const struct dwc2_core_params params_danube = {
+ .otg_cap = 2, /* non-HNP/non-SRP */
+ .otg_ver = -1,
+ .dma_enable = -1,
+ .dma_desc_enable = -1,
+ .dma_desc_fs_enable = -1,
+ .speed = -1,
+ .enable_dynamic_fifo = -1,
+ .en_multiple_tx_fifo = -1,
+ .host_rx_fifo_size = -1,
+ .host_nperio_tx_fifo_size = -1,
+ .host_perio_tx_fifo_size = -1,
+ .max_transfer_size = -1,
+ .max_packet_count = -1,
+ .host_channels = -1,
+ .phy_type = -1,
+ .phy_utmi_width = -1,
+ .phy_ulpi_ddr = -1,
+ .phy_ulpi_ext_vbus = -1,
+ .i2c_enable = -1,
+ .ulpi_fs_ls = -1,
+ .host_support_fs_ls_low_power = -1,
+ .host_ls_low_power_phy_clk = -1,
+ .ts_dline = -1,
+ .reload_ctl = -1,
+ .ahbcfg = -1,
+ .uframe_sched = -1,
+ .external_id_pin_ctl = -1,
+ .hibernation = -1,
+};
+
+static const struct dwc2_core_params params_ase = {
.otg_cap = 2, /* non-HNP/non-SRP */
.otg_ver = -1,
.dma_enable = -1,
@@ -163,8 +194,8 @@ static const struct dwc2_core_params par
.host_rx_fifo_size = 288, /* 288 DWORDs */
.host_nperio_tx_fifo_size = 128, /* 128 DWORDs */
.host_perio_tx_fifo_size = 96, /* 96 DWORDs */
- .max_transfer_size = 65535,
- .max_packet_count = 511,
+ .max_transfer_size = -1,
+ .max_packet_count = -1,
.host_channels = -1,
.phy_type = -1,
.phy_utmi_width = -1,
@@ -176,8 +207,37 @@ static const struct dwc2_core_params par
.host_ls_low_power_phy_clk = -1,
.ts_dline = -1,
.reload_ctl = -1,
- .ahbcfg = GAHBCFG_HBSTLEN_INCR16 <<
- GAHBCFG_HBSTLEN_SHIFT,
+ .ahbcfg = -1,
+ .uframe_sched = -1,
+ .external_id_pin_ctl = -1,
+ .hibernation = -1,
+};
+
+static const struct dwc2_core_params params_xrx200 = {
+ .otg_cap = 2, /* non-HNP/non-SRP */
+ .otg_ver = -1,
+ .dma_enable = -1,
+ .dma_desc_enable = -1,
+ .speed = -1,
+ .enable_dynamic_fifo = -1,
+ .en_multiple_tx_fifo = -1,
+ .host_rx_fifo_size = 288, /* 288 DWORDs */
+ .host_nperio_tx_fifo_size = 128, /* 128 DWORDs */
+ .host_perio_tx_fifo_size = 136, /* 136 DWORDs */
+ .max_transfer_size = -1,
+ .max_packet_count = -1,
+ .host_channels = -1,
+ .phy_type = -1,
+ .phy_utmi_width = -1,
+ .phy_ulpi_ddr = -1,
+ .phy_ulpi_ext_vbus = -1,
+ .i2c_enable = -1,
+ .ulpi_fs_ls = -1,
+ .host_support_fs_ls_low_power = -1,
+ .host_ls_low_power_phy_clk = -1,
+ .ts_dline = -1,
+ .reload_ctl = -1,
+ .ahbcfg = -1,
.uframe_sched = -1,
.external_id_pin_ctl = -1,
.hibernation = -1,
@@ -515,8 +575,11 @@ static const struct of_device_id dwc2_of
{ .compatible = "brcm,bcm2835-usb", .data = &params_bcm2835 },
{ .compatible = "hisilicon,hi6220-usb", .data = &params_hi6220 },
{ .compatible = "rockchip,rk3066-usb", .data = &params_rk3066 },
- { .compatible = "lantiq,arx100-usb", .data = &params_ltq },
- { .compatible = "lantiq,xrx200-usb", .data = &params_ltq },
+ { .compatible = "lantiq,danube-usb", .data = &params_danube },
+ { .compatible = "lantiq,ase-usb", .data = &params_ase },
+ { .compatible = "lantiq,arx100-usb", .data = &params_ase },
+ { .compatible = "lantiq,xrx200-usb", .data = &params_xrx200 },
+ { .compatible = "lantiq,xrx300-usb", .data = &params_xrx200 },
{ .compatible = "snps,dwc2", .data = NULL },
{ .compatible = "samsung,s3c6400-hsotg", .data = NULL},
{ .compatible = "amlogic,meson8b-usb", .data = &params_amlogic },

Some files were not shown because too many files have changed in this diff Show more