ar71xx: Add support for MikroTik RB951Ui-2HnD

I noticed that the patch at http://patchwork.openwrt.org/patch/4017/
for adding support for the MikroTik RouterBOARD 951Ui-2HnD had been
abandoned because it wasn't generated and sent to the mailing list
correctly and doesn't apply as a result.  I have cleaned up this patch.

When testing this on real hardware, I also noticed that wireless didn't
work, so this patch fixes that as well.

This patch applies cleanly to SVN 39392.

Signed-off-by: Matthew Reeve <mreeve@tenxnetworks.com>
Patchwork: http://patchwork.openwrt.org/patch/4773/
[juhosg:
  - drop the 'rb951ui_wlan_init' function and rework the code to
    use the recently introduced rb95x_wlan_init function instead,
  - fix GPIO number of the port5 LED,
  - rename LEDs according to the standard LED naming conventions,
    and use 'rb' prefix in the names]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39641
This commit is contained in:
Gabor Juhos 2014-02-20 17:07:51 +00:00
parent ab6e3af7fc
commit d19b868b12
2 changed files with 89 additions and 8 deletions

View file

@ -36,6 +36,7 @@
#include "dev-wmac.h"
#include "machtypes.h"
#include "routerboot.h"
#include "dev-leds-gpio.h"
#define RB95X_GPIO_NAND_NCE 14
@ -58,6 +59,38 @@ static struct mtd_partition rb95x_nand_partitions[] = {
},
};
static struct gpio_led rb951ui_leds_gpio[] __initdata = {
{
.name = "rb:green:wlan",
.gpio = 11,
.active_low = 1,
}, {
.name = "rb:green:act",
.gpio = 3,
.active_low = 1,
}, {
.name = "rb:green:port1",
.gpio = 13,
.active_low = 1,
}, {
.name = "rb:green:port2",
.gpio = 12,
.active_low = 1,
}, {
.name = "rb:green:port3",
.gpio = 4,
.active_low = 1,
}, {
.name = "rb:green:port4",
.gpio = 21,
.active_low = 1,
}, {
.name = "rb:green:port5",
.gpio = 16,
.active_low = 1,
}
};
static struct ar8327_pad_cfg rb95x_ar8327_pad0_cfg = {
.mode = AR8327_PAD_MAC_RGMII,
.txclk_delay_en = true,
@ -157,6 +190,14 @@ static int __init rb95x_setup(void)
rb95x_nand_init();
return 0;
}
static void __init rb951g_setup(void)
{
if (rb95x_setup())
return;
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
AR934X_ETH_CFG_SW_ONLY_MODE);
@ -171,17 +212,47 @@ static int __init rb95x_setup(void)
ath79_register_eth(0);
return 0;
}
static void __init rb951g_setup(void)
{
if (rb95x_setup())
return;
rb95x_wlan_init();
ath79_register_usb();
}
MIPS_MACHINE(ATH79_MACH_RB_951G, "951G", "MikroTik RouterBOARD 951G-2HnD",
rb951g_setup);
static void __init rb951ui_setup(void)
{
if (rb95x_setup())
return;
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE);
ath79_register_mdio(1, 0x0);
ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
ath79_switch_data.phy4_mii_en = 1;
ath79_switch_data.phy_poll_mask = BIT(4);
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
ath79_eth0_data.phy_mask = BIT(4);
ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
ath79_register_eth(0);
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
ath79_register_eth(1);
gpio_request_one(20, GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
"USB power");
gpio_request_one(2, GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
"POE power");
rb95x_wlan_init();
ath79_register_usb();
ath79_register_leds_gpio(-1, ARRAY_SIZE(rb951ui_leds_gpio),
rb951ui_leds_gpio);
}
MIPS_MACHINE(ATH79_MACH_RB_951U, "951HnD", "MikroTik RouterBOARD 951Ui-2HnD",
rb951ui_setup);

View file

@ -0,0 +1,10 @@
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -81,6 +81,7 @@ enum ath79_mach_type {
ATH79_MACH_RB_751, /* MikroTik RouterBOARD 751 */
ATH79_MACH_RB_751G, /* Mikrotik RouterBOARD 751G */
ATH79_MACH_RB_951G, /* Mikrotik RouterBOARD 951G */
+ ATH79_MACH_RB_951U, /* Mikrotik RouterBOARD 951Ui-2HnD */
ATH79_MACH_RB_2011G, /* Mikrotik RouterBOARD 2011UAS-2HnD */
ATH79_MACH_RB_2011L, /* Mikrotik RouterBOARD 2011L */
ATH79_MACH_RB_2011US, /* Mikrotik RouterBOARD 2011UAS */