ar71xx: create wndr3700 network config from uci-defaults
Since that was the last configuration in defconfig directory we can drop the defconfig init script too. Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 39373
This commit is contained in:
Luka Perkov
parent
d66d2ad104
commit
cbc892a549
3 changed files with 40 additions and 97 deletions
|
|
@ -1,77 +0,0 @@
|
||||||
config interface loopback
|
|
||||||
option ifname lo
|
|
||||||
option proto static
|
|
||||||
option ipaddr 127.0.0.1
|
|
||||||
option netmask 255.0.0.0
|
|
||||||
|
|
||||||
config interface lan
|
|
||||||
option ifname eth0.1
|
|
||||||
option type bridge
|
|
||||||
option proto static
|
|
||||||
option ipaddr 192.168.1.1
|
|
||||||
option netmask 255.255.255.0
|
|
||||||
option ip6assign 60
|
|
||||||
|
|
||||||
config interface wan
|
|
||||||
option ifname eth1
|
|
||||||
option proto dhcp
|
|
||||||
|
|
||||||
config interface wan6
|
|
||||||
option ifname @wan
|
|
||||||
option proto dhcpv6
|
|
||||||
|
|
||||||
config globals globals
|
|
||||||
option ula_prefix auto
|
|
||||||
|
|
||||||
config switch
|
|
||||||
option name rtl8366s
|
|
||||||
option reset 1
|
|
||||||
option enable_vlan 1
|
|
||||||
# Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms
|
|
||||||
option blinkrate 2
|
|
||||||
|
|
||||||
config switch_vlan
|
|
||||||
option device rtl8366s
|
|
||||||
option vlan 1
|
|
||||||
option ports "0 1 2 3 5t"
|
|
||||||
|
|
||||||
config switch_port
|
|
||||||
# Port 1 controls the GREEN configuration of LEDs for
|
|
||||||
# the switch and the section does not correspond to a real
|
|
||||||
# switch port.
|
|
||||||
#
|
|
||||||
# 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s;
|
|
||||||
# 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity;
|
|
||||||
# 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;
|
|
||||||
# 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx);
|
|
||||||
# 14: Link (master); 15: separate register
|
|
||||||
|
|
||||||
option device rtl8366s
|
|
||||||
option port 1
|
|
||||||
option led 6
|
|
||||||
|
|
||||||
config switch_port
|
|
||||||
# Port 2 controls the ORANGE configuration of LEDs for
|
|
||||||
# the switch and the section does not correspond to a real
|
|
||||||
# switch port.
|
|
||||||
#
|
|
||||||
# See the key above for switch port 1 for the meaning of the
|
|
||||||
# 'led' setting below.
|
|
||||||
|
|
||||||
option device rtl8366s
|
|
||||||
option port 2
|
|
||||||
option led 9
|
|
||||||
|
|
||||||
config switch_port
|
|
||||||
# Port 5 controls the configuration of the WAN LED and the
|
|
||||||
# section does not correspond to a real switch port.
|
|
||||||
#
|
|
||||||
# To toggle the use of green or orange LEDs for the WAN port,
|
|
||||||
# see the LED setting for wndr3700:green:wan in /etc/config/system.
|
|
||||||
#
|
|
||||||
# See the key above for switch port 1 for the meaning of the
|
|
||||||
# 'led' setting below.
|
|
||||||
|
|
||||||
option device rtl8366s
|
|
||||||
option port 5
|
|
||||||
option led 2
|
|
||||||
|
|
@ -1,20 +0,0 @@
|
||||||
#!/bin/sh /etc/rc.common
|
|
||||||
#
|
|
||||||
# Copyright (C) 2009 OpenWrt.org
|
|
||||||
#
|
|
||||||
|
|
||||||
START=05
|
|
||||||
|
|
||||||
start() {
|
|
||||||
. /lib/ar71xx.sh
|
|
||||||
|
|
||||||
local board=$(ar71xx_board_name)
|
|
||||||
|
|
||||||
[ ! -d /etc/defconfig/$board ] && return 0
|
|
||||||
|
|
||||||
for f in $( ls /etc/defconfig/$board ); do
|
|
||||||
if [ ! -e /etc/config/$f ]; then
|
|
||||||
cp /etc/defconfig/$board/$f /etc/config/
|
|
||||||
fi
|
|
||||||
done
|
|
||||||
}
|
|
||||||
|
|
@ -321,6 +321,46 @@ ew-dorin-router)
|
||||||
ucidef_add_switch_vlan "switch0" "1" "0 2 3"
|
ucidef_add_switch_vlan "switch0" "1" "0 2 3"
|
||||||
;;
|
;;
|
||||||
|
|
||||||
|
wndr3700)
|
||||||
|
ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
|
||||||
|
ucidef_add_switch "switch0" "1" "1"
|
||||||
|
ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t"
|
||||||
|
# Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms
|
||||||
|
uci set network.@switch[-1].blinkrate='2'
|
||||||
|
|
||||||
|
ucidef_add_switch_port "switch0" "1"
|
||||||
|
# Port 1 controls the GREEN configuration of LEDs for
|
||||||
|
# the switch and the section does not correspond to a real
|
||||||
|
# switch port.
|
||||||
|
#
|
||||||
|
# 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s;
|
||||||
|
# 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity;
|
||||||
|
# 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;
|
||||||
|
# 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx);
|
||||||
|
# 14: Link (master); 15: separate register
|
||||||
|
uci set network.@switch_port[-1].led='6'
|
||||||
|
|
||||||
|
ucidef_add_switch_port "switch0" "2"
|
||||||
|
# Port 2 controls the ORANGE configuration of LEDs for
|
||||||
|
# the switch and the section does not correspond to a real
|
||||||
|
# switch port.
|
||||||
|
#
|
||||||
|
# See the key above for switch port 1 for the meaning of the
|
||||||
|
# 'led' setting below.
|
||||||
|
uci set network.@switch_port[-1].led='9'
|
||||||
|
|
||||||
|
ucidef_add_switch_port "switch0" "5"
|
||||||
|
# Port 5 controls the configuration of the WAN LED and the
|
||||||
|
# section does not correspond to a real switch port.
|
||||||
|
#
|
||||||
|
# To toggle the use of green or orange LEDs for the WAN port,
|
||||||
|
# see the LED setting for wndr3700:green:wan in /etc/config/system.
|
||||||
|
#
|
||||||
|
# See the key above for switch port 1 for the meaning of the
|
||||||
|
# 'led' setting below.
|
||||||
|
uci set network.@switch_port[-1].led='2'
|
||||||
|
;;
|
||||||
|
|
||||||
*)
|
*)
|
||||||
ucidef_set_interfaces_lan_wan "eth0" "eth1"
|
ucidef_set_interfaces_lan_wan "eth0" "eth1"
|
||||||
;;
|
;;
|
||||||
|
|
|
||||||
Loading…
Reference in a new issue