From cbc892a549d0331542854fd62c8ffc4faee9900b Mon Sep 17 00:00:00 2001 From: Luka Perkov Date: Thu, 23 Jan 2014 11:33:42 +0000 Subject: [PATCH] ar71xx: create wndr3700 network config from uci-defaults Since that was the last configuration in defconfig directory we can drop the defconfig init script too. Signed-off-by: Luka Perkov SVN-Revision: 39373 --- .../base-files/etc/defconfig/wndr3700/network | 77 ------------------- .../ar71xx/base-files/etc/init.d/defconfig | 20 ----- .../base-files/etc/uci-defaults/02_network | 40 ++++++++++ 3 files changed, 40 insertions(+), 97 deletions(-) delete mode 100644 target/linux/ar71xx/base-files/etc/defconfig/wndr3700/network delete mode 100755 target/linux/ar71xx/base-files/etc/init.d/defconfig diff --git a/target/linux/ar71xx/base-files/etc/defconfig/wndr3700/network b/target/linux/ar71xx/base-files/etc/defconfig/wndr3700/network deleted file mode 100644 index ad05525d2c..0000000000 --- a/target/linux/ar71xx/base-files/etc/defconfig/wndr3700/network +++ /dev/null @@ -1,77 +0,0 @@ -config interface loopback - option ifname lo - option proto static - option ipaddr 127.0.0.1 - option netmask 255.0.0.0 - -config interface lan - option ifname eth0.1 - option type bridge - option proto static - option ipaddr 192.168.1.1 - option netmask 255.255.255.0 - option ip6assign 60 - -config interface wan - option ifname eth1 - option proto dhcp - -config interface wan6 - option ifname @wan - option proto dhcpv6 - -config globals globals - option ula_prefix auto - -config switch - option name rtl8366s - option reset 1 - option enable_vlan 1 - # Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms - option blinkrate 2 - -config switch_vlan - option device rtl8366s - option vlan 1 - option ports "0 1 2 3 5t" - -config switch_port - # Port 1 controls the GREEN configuration of LEDs for - # the switch and the section does not correspond to a real - # switch port. - # - # 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s; - # 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity; - # 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber; - # 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx); - # 14: Link (master); 15: separate register - - option device rtl8366s - option port 1 - option led 6 - -config switch_port - # Port 2 controls the ORANGE configuration of LEDs for - # the switch and the section does not correspond to a real - # switch port. - # - # See the key above for switch port 1 for the meaning of the - # 'led' setting below. - - option device rtl8366s - option port 2 - option led 9 - -config switch_port - # Port 5 controls the configuration of the WAN LED and the - # section does not correspond to a real switch port. - # - # To toggle the use of green or orange LEDs for the WAN port, - # see the LED setting for wndr3700:green:wan in /etc/config/system. - # - # See the key above for switch port 1 for the meaning of the - # 'led' setting below. - - option device rtl8366s - option port 5 - option led 2 diff --git a/target/linux/ar71xx/base-files/etc/init.d/defconfig b/target/linux/ar71xx/base-files/etc/init.d/defconfig deleted file mode 100755 index 364fa4a6a5..0000000000 --- a/target/linux/ar71xx/base-files/etc/init.d/defconfig +++ /dev/null @@ -1,20 +0,0 @@ -#!/bin/sh /etc/rc.common -# -# Copyright (C) 2009 OpenWrt.org -# - -START=05 - -start() { - . /lib/ar71xx.sh - - local board=$(ar71xx_board_name) - - [ ! -d /etc/defconfig/$board ] && return 0 - - for f in $( ls /etc/defconfig/$board ); do - if [ ! -e /etc/config/$f ]; then - cp /etc/defconfig/$board/$f /etc/config/ - fi - done -} diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network index a7eeab017c..dac75ae051 100755 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network @@ -321,6 +321,46 @@ ew-dorin-router) ucidef_add_switch_vlan "switch0" "1" "0 2 3" ;; +wndr3700) + ucidef_set_interfaces_lan_wan "eth0.1" "eth1" + ucidef_add_switch "switch0" "1" "1" + ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t" + # Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms + uci set network.@switch[-1].blinkrate='2' + + ucidef_add_switch_port "switch0" "1" + # Port 1 controls the GREEN configuration of LEDs for + # the switch and the section does not correspond to a real + # switch port. + # + # 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s; + # 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity; + # 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber; + # 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx); + # 14: Link (master); 15: separate register + uci set network.@switch_port[-1].led='6' + + ucidef_add_switch_port "switch0" "2" + # Port 2 controls the ORANGE configuration of LEDs for + # the switch and the section does not correspond to a real + # switch port. + # + # See the key above for switch port 1 for the meaning of the + # 'led' setting below. + uci set network.@switch_port[-1].led='9' + + ucidef_add_switch_port "switch0" "5" + # Port 5 controls the configuration of the WAN LED and the + # section does not correspond to a real switch port. + # + # To toggle the use of green or orange LEDs for the WAN port, + # see the LED setting for wndr3700:green:wan in /etc/config/system. + # + # See the key above for switch port 1 for the meaning of the + # 'led' setting below. + uci set network.@switch_port[-1].led='2' + ;; + *) ucidef_set_interfaces_lan_wan "eth0" "eth1" ;;