ar71xx: add support for Wallys DR342

Wallys DR342 is a 5 GHz, 2T2R AP/CPE board based on Atheros AR9342.

Short specification:

- 560/450/225 MHz (CPU/DDR/AHB)
- 1x Gbps Ethernet (AR8035) with passive PoE support (24-56 V)
- 64 MB of RAM (DDR2)
- 16 MB of FLASH
- 2T2R 5 GHz with external FEM (SKY85728-11), up to 30 dBm
- 2x MMCX connectors
- miniPCIe connector with PCIe and USB 2.0 buses
- optional miniSIM slot
- 7x LED, 1x button
- UART, (E)JTAG and LED headers
- 1x DC jack for main power (12-56 V)

Flash instruction (do it under U-Boot, using UART):

1. tftp 0x82000000 lede-ar71xx-generic-dr342-squashfs-sysupgrade.bin
2. erase 0x9f050000 +$filesize
3. cp.b $fileaddr 0x9f050000 $filesize
4. setenv bootcmd "bootm 0x9f050000"
5. saveenv && reset

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

target/linux/ar71xx/base-files/etc/board.d/02_network

@@ -70,6 +70,7 @@ ar71xx_setup_interfaces()
 	cap4200ag|\
 	cf-e380ac-v1|\
 	cf-e380ac-v2|\
+	dr342|\
 	eap120|\
 	eap300v2|\
 	eap7660d|\

target/linux/ar71xx/base-files/etc/diag.sh

@@ -38,6 +38,7 @@ get_status_led() {
 	ap531b0|\
 	cpe505n|\
 	db120|\
+	dr342|\
 	dr344|\
 	tew-632brp|\
 	tl-wr942n-v1|\

target/linux/ar71xx/base-files/lib/ar71xx.sh

@@ -603,6 +603,9 @@ ar71xx_board_detect() {
 	*"Domino Pi")
 		name="gl-domino"
 		;;
+	*"DR342")
+		name="dr342"
+		;;
 	*"DR344")
 		name="dr344"
 		;;

target/linux/ar71xx/base-files/lib/upgrade/platform.sh

@@ -238,6 +238,7 @@ platform_check_image() {
 	dlan-hotspot|\
 	dlan-pro-1200-ac|\
 	dlan-pro-500-wp|\
+	dr342|\
 	dr531|\
 	dragino2|\
 	ebr-2310-c1|\

target/linux/ar71xx/config-4.4

@@ -95,6 +95,7 @@ CONFIG_ATH79_MACH_DLAN_HOTSPOT=y
 CONFIG_ATH79_MACH_DLAN_PRO_1200_AC=y
 CONFIG_ATH79_MACH_DLAN_PRO_500_WP=y
 # CONFIG_ATH79_MACH_DOMYWIFI_DW33D is not set
+CONFIG_ATH79_MACH_DR342=y
 CONFIG_ATH79_MACH_DR344=y
 CONFIG_ATH79_MACH_DR531=y
 CONFIG_ATH79_MACH_DRAGINO2=y

target/linux/ar71xx/config-4.9

@@ -93,6 +93,7 @@ CONFIG_ATH79_MACH_DLAN_HOTSPOT=y
 CONFIG_ATH79_MACH_DLAN_PRO_1200_AC=y
 CONFIG_ATH79_MACH_DLAN_PRO_500_WP=y
 # CONFIG_ATH79_MACH_DOMYWIFI_DW33D is not set
+CONFIG_ATH79_MACH_DR342=y
 CONFIG_ATH79_MACH_DR344=y
 CONFIG_ATH79_MACH_DR531=y
 CONFIG_ATH79_MACH_DRAGINO2=y

target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt

@@ -638,9 +638,21 @@ config ATH79_MACH_DOMYWIFI_DW33D
 	select ATH79_DEV_WMAC
 	select ATH79_DEV_USB
 
+config ATH79_MACH_DR342
+	bool "Wallys DR342 board support"
+	select SOC_AR934X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
 config ATH79_MACH_DR344
 	bool "Wallys DR344 board support"
 	select SOC_AR934X
+	select ATH79_DEV_AP9X_PCI if PCI
 	select ATH79_DEV_ETH
 	select ATH79_DEV_GPIO_BUTTONS
 	select ATH79_DEV_LEDS_GPIO

target/linux/ar71xx/files/arch/mips/ath79/Makefile

@@ -102,6 +102,7 @@ obj-$(CONFIG_ATH79_MACH_DLAN_HOTSPOT)		+= mach-dlan-hotspot.o
 obj-$(CONFIG_ATH79_MACH_DLAN_PRO_1200_AC)	+= mach-dlan-pro-1200-ac.o
 obj-$(CONFIG_ATH79_MACH_DLAN_PRO_500_WP)	+= mach-dlan-pro-500-wp.o
 obj-$(CONFIG_ATH79_MACH_DOMYWIFI_DW33D)		+= mach-domywifi-dw33d.o
+obj-$(CONFIG_ATH79_MACH_DR342)			+= mach-dr344.o
 obj-$(CONFIG_ATH79_MACH_DR344)			+= mach-dr344.o
 obj-$(CONFIG_ATH79_MACH_DR531)			+= mach-dr531.o
 obj-$(CONFIG_ATH79_MACH_DRAGINO2)		+= mach-dragino2.o

target/linux/ar71xx/files/arch/mips/ath79/mach-dr344.c

@@ -1,9 +1,10 @@
 /*
- * Wallys DR344 board support
+ * Wallys DR342/DR344 boards support
  *
  * Copyright (c) 2011 Qualcomm Atheros
  * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
  * Copyright (c) 2015 Philippe Duchein <wireless-dev@duchein.net>
+ * Copyright (c) 2017 Piotr Dymacz <pepe2k@gmail.com>
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -39,24 +40,51 @@
 #include "dev-wmac.h"
 #include "machtypes.h"
 
-#define DR344_GPIO_LED_SIG1		12
+#define DR34X_GPIO_LED_SIG1		12
-#define DR344_GPIO_LED_SIG2		13
+#define DR34X_GPIO_LED_SIG2		13
-#define DR344_GPIO_LED_SIG3		14
+#define DR34X_GPIO_LED_SIG3		14
-#define DR344_GPIO_LED_SIG4		15
+#define DR34X_GPIO_LED_SIG4		15
-#define DR344_GPIO_LED_STATUS		11
+#define DR34X_GPIO_LED_STATUS		11
 #define DR344_GPIO_LED_LAN		17
 #define DR344_GPIO_EXTERNAL_LNA0	18
 #define DR344_GPIO_EXTERNAL_LNA1	19
 
-#define DR344_GPIO_BTN_RESET		16
+#define DR34X_GPIO_BTN_RESET		16
 
 #define DR344_KEYS_POLL_INTERVAL	20	/* msecs */
 #define DR344_KEYS_DEBOUNCE_INTERVAL	(3 * DR344_KEYS_POLL_INTERVAL)
 
-#define DR344_MAC0_OFFSET		0
+#define DR34X_MAC0_OFFSET		0
-#define DR344_MAC1_OFFSET		8
+#define DR34X_MAC1_OFFSET		8
-#define DR344_WMAC_CALDATA_OFFSET	0x1000
+#define DR34X_WMAC_CALDATA_OFFSET	0x1000
-#define DR344_PCIE_CALDATA_OFFSET	0x5000
+
+static struct gpio_led dr342_leds_gpio[] __initdata = {
+	{
+		.name		= "dr342:green:status",
+		.gpio		= DR34X_GPIO_LED_STATUS,
+		.active_low	= 1,
+	},
+	{
+		.name		= "dr342:green:sig1",
+		.gpio		= DR34X_GPIO_LED_SIG1,
+		.active_low	= 1,
+	},
+	{
+		.name		= "dr342:green:sig2",
+		.gpio		= DR34X_GPIO_LED_SIG2,
+		.active_low	= 1,
+	},
+	{
+		.name		= "dr342:green:sig3",
+		.gpio		= DR34X_GPIO_LED_SIG3,
+		.active_low	= 1,
+	},
+	{
+		.name		= "dr342:green:sig4",
+		.gpio		= DR34X_GPIO_LED_SIG4,
+		.active_low	= 1,
+	}
+};
 
 static struct gpio_led dr344_leds_gpio[] __initdata = {
 	{
@@ -66,96 +94,82 @@ static struct gpio_led dr344_leds_gpio[] __initdata = {
 	},
 	{
 		.name		= "dr344:green:status",
-		.gpio		= DR344_GPIO_LED_STATUS,
+		.gpio		= DR34X_GPIO_LED_STATUS,
 		.active_low	= 1,
 	},
 	{
 		.name		= "dr344:green:sig1",
-		.gpio		= DR344_GPIO_LED_SIG1,
+		.gpio		= DR34X_GPIO_LED_SIG1,
 		.active_low	= 1,
 	},
 	{
 		.name		= "dr344:green:sig2",
-		.gpio		= DR344_GPIO_LED_SIG2,
+		.gpio		= DR34X_GPIO_LED_SIG2,
 		.active_low	= 1,
 	},
 	{
 		.name		= "dr344:green:sig3",
-		.gpio		= DR344_GPIO_LED_SIG3,
+		.gpio		= DR34X_GPIO_LED_SIG3,
 		.active_low	= 1,
 	},
 	{
 		.name		= "dr344:green:sig4",
-		.gpio		= DR344_GPIO_LED_SIG4,
+		.gpio		= DR34X_GPIO_LED_SIG4,
 		.active_low	= 1,
 	}
 };
 
-static struct gpio_keys_button dr344_gpio_keys[] __initdata = {
+static struct gpio_keys_button dr34x_gpio_keys[] __initdata = {
 	{
 		.desc		= "reset",
 		.type		= EV_KEY,
 		.code		= KEY_RESTART,
 		.debounce_interval = DR344_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= DR344_GPIO_BTN_RESET,
+		.gpio		= DR34X_GPIO_BTN_RESET,
 		.active_low	= 1,
 	},
 };
 
-static struct at803x_platform_data dr344_at803x_data = {
+static struct at803x_platform_data dr34x_at803x_data = {
 	.disable_smarteee = 1,
 	.enable_rgmii_rx_delay = 1,
 	.enable_rgmii_tx_delay = 1,
 };
 
-static struct mdio_board_info dr344_mdio0_info[] = {
+static struct mdio_board_info dr34x_mdio0_info[] = {
 	{
 		.bus_id = "ag71xx-mdio.0",
 		.phy_addr = 0,
-		.platform_data = &dr344_at803x_data,
+		.platform_data = &dr34x_at803x_data,
 	},
 };
 
-static void __init dr344_setup(void)
+static void __init dr34x_setup(void)
 {
 	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
 	u8 *mac = (u8 *) KSEG1ADDR(0x1f03f810);
 
 	ath79_register_m25p80(NULL);
 
-	ath79_gpio_direction_select(DR344_GPIO_LED_STATUS, true);
+	ath79_gpio_direction_select(DR34X_GPIO_LED_STATUS, true);
-	gpio_set_value(DR344_GPIO_LED_STATUS, 1);
+	gpio_set_value(DR34X_GPIO_LED_STATUS, 1);
-	ath79_gpio_output_select(DR344_GPIO_LED_STATUS, 0);
+	ath79_gpio_output_select(DR34X_GPIO_LED_STATUS, 0);
 
-	ath79_gpio_direction_select(DR344_GPIO_LED_LAN, true);
-	gpio_set_value(DR344_GPIO_LED_LAN, 1);
-	ath79_gpio_output_select(DR344_GPIO_LED_LAN, 0);
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(dr344_leds_gpio),
-				 dr344_leds_gpio);
 	ath79_register_gpio_keys_polled(-1, DR344_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(dr344_gpio_keys),
+					ARRAY_SIZE(dr34x_gpio_keys),
-					dr344_gpio_keys);
+					dr34x_gpio_keys);
 
 	ath79_register_usb();
 
-	ath79_wmac_set_ext_lna_gpio(0, DR344_GPIO_EXTERNAL_LNA0);
+	ath79_register_wmac(art + DR34X_WMAC_CALDATA_OFFSET, NULL);
-
-	ath79_wmac_set_ext_lna_gpio(1, DR344_GPIO_EXTERNAL_LNA1);
-
-	ath79_register_wmac(art + DR344_WMAC_CALDATA_OFFSET, NULL);
 
 	ath79_register_pci();
 
-	mdiobus_register_board_info(dr344_mdio0_info,
+	mdiobus_register_board_info(dr34x_mdio0_info,
-					ARRAY_SIZE(dr344_mdio0_info));
+				    ARRAY_SIZE(dr34x_mdio0_info));
 
-	ath79_register_mdio(1, 0x0);
 	ath79_register_mdio(0, 0x0);
 
-	ath79_init_mac(ath79_eth0_data.mac_addr, mac + DR344_MAC0_OFFSET, 0);
-	ath79_init_mac(ath79_eth1_data.mac_addr, mac + DR344_MAC1_OFFSET, 0);
-
 	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
 				   AR934X_ETH_CFG_SW_ONLY_MODE);
 
@@ -167,13 +181,44 @@ static void __init dr344_setup(void)
 	ath79_eth0_pll_data.pll_100 = 0x0101;
 	ath79_eth0_pll_data.pll_10 = 0x1313;
 
+	ath79_init_mac(ath79_eth0_data.mac_addr, mac + DR34X_MAC0_OFFSET, 0);
+	ath79_register_eth(0);
+}
+
+static void __init dr342_setup(void)
+{
+	dr34x_setup();
+
+	ath79_register_leds_gpio(-1, ARRAY_SIZE(dr342_leds_gpio),
+				 dr342_leds_gpio);
+}
+
+static void __init dr344_setup(void)
+{
+	u8 *mac = (u8 *) KSEG1ADDR(0x1f03f810);
+
+	dr34x_setup();
+
+	ath79_gpio_direction_select(DR344_GPIO_LED_LAN, true);
+	gpio_set_value(DR344_GPIO_LED_LAN, 1);
+	ath79_gpio_output_select(DR344_GPIO_LED_LAN, 0);
+
+	ath79_register_leds_gpio(-1, ARRAY_SIZE(dr344_leds_gpio),
+				 dr344_leds_gpio);
+
+	ath79_wmac_set_ext_lna_gpio(0, DR344_GPIO_EXTERNAL_LNA0);
+	ath79_wmac_set_ext_lna_gpio(1, DR344_GPIO_EXTERNAL_LNA1);
+
+	ath79_register_mdio(1, 0x0);
+
 	/* GMAC1 is connected to the internal switch */
 	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
 	ath79_eth1_data.speed = SPEED_1000;
 	ath79_eth1_data.duplex = DUPLEX_FULL;
 
-	ath79_register_eth(0);
+	ath79_init_mac(ath79_eth1_data.mac_addr, mac + DR34X_MAC1_OFFSET, 0);
 	ath79_register_eth(1);
 }
 
+MIPS_MACHINE(ATH79_MACH_DR342, "DR342", "Wallys DR342", dr342_setup);
 MIPS_MACHINE(ATH79_MACH_DR344, "DR344", "Wallys DR344", dr344_setup);

target/linux/ar71xx/files/arch/mips/ath79/machtypes.h

@@ -92,6 +92,7 @@ enum ath79_mach_type {
 	ATH79_MACH_DLAN_PRO_1200_AC,		/* devolo dLAN pro 1200+ WiFi ac*/
 	ATH79_MACH_DLAN_PRO_500_WP,		/* devolo dLAN pro 500 Wireless+ */
 	ATH79_MACH_DOMYWIFI_DW33D,		/* DomyWifi DW33D */
+	ATH79_MACH_DR342,			/* Wallys DR342 */
 	ATH79_MACH_DR344,			/* Wallys DR344 */
 	ATH79_MACH_DR531,			/* Wallys DR531 */
 	ATH79_MACH_DRAGINO2,			/* Dragino Version 2 */

target/linux/ar71xx/image/generic.mk

@@ -349,6 +349,15 @@ define Device/mr16
 endef
 TARGET_DEVICES += mr12 mr16
 
+define Device/dr342
+  DEVICE_TITLE := Wallys DR342
+  DEVICE_PACKAGES := kmod-usb-core kmod-usb2 -swconfig
+  BOARDNAME := DR342
+  IMAGE_SIZE := 16000k
+  MTDPARTS := spi0.0:192k(u-boot)ro,64k(u-boot-env),64k(partition-table)ro,16000k(firmware),64k(art)ro
+endef
+TARGET_DEVICES += dr342
+
 define Device/dr344
   DEVICE_TITLE := Wallys DR344
   BOARDNAME := DR344

target/linux/ar71xx/mikrotik/config-default

@@ -59,6 +59,7 @@
 # CONFIG_ATH79_MACH_DLAN_HOTSPOT is not set
 # CONFIG_ATH79_MACH_DLAN_PRO_1200_AC is not set
 # CONFIG_ATH79_MACH_DLAN_PRO_500_WP is not set
+# CONFIG_ATH79_MACH_DR342 is not set
 # CONFIG_ATH79_MACH_DR344 is not set
 # CONFIG_ATH79_MACH_DR531 is not set
 # CONFIG_ATH79_MACH_DRAGINO2 is not set

target/linux/ar71xx/nand/config-default

@@ -60,6 +60,7 @@ CONFIG_ATH79_MACH_C60=y
 # CONFIG_ATH79_MACH_DLAN_PRO_1200_AC is not set
 # CONFIG_ATH79_MACH_DLAN_PRO_500_WP is not set
 CONFIG_ATH79_MACH_DOMYWIFI_DW33D=y
+# CONFIG_ATH79_MACH_DR342 is not set
 # CONFIG_ATH79_MACH_DR344 is not set
 # CONFIG_ATH79_MACH_DR531 is not set
 # CONFIG_ATH79_MACH_DRAGINO2 is not set