ramips: Add base-files for HiWiFi HC5x61 models

HiWiFi HC5661/5761/5861 models are manufactured by http://www.hiwifi.com. These models have similar hardware specs(MT7620A + 128M DDR2 + 16M flash). This patch adds support for them.

The original author is Justin Liu (rssnsj@gmail.com). I ported the patch to trunk and submitted it here with his approval.

v3 fix
   1: Fixed model order
   2: Remove manufacturer name from model name
   3: Use a hacky but prettier way to get mac address.

Signed-off-by: Xiaoning Kang <kangxn@163.com>

SVN-Revision: 47111

target/linux/ramips/base-files/etc/board.d/01_leds

@@ -132,6 +132,24 @@ fonera20n)
 	set_usb_led "$board:orange:usb"
 	set_wifi_led "$board:orange:wifi"
 	;;
+hc5661)
+	ucidef_set_led_default "system" "system" "$board:blue:system" "1"
+	ucidef_set_led_netdev "internet" "internet" "$board:blue:internet" "eth0.2"
+	set_wifi_led "$board:blue:wlan2g"
+	;;	
+hc5761)
+	ucidef_set_led_default "system" "system" "$board:blue:system" "1"
+	ucidef_set_led_netdev "internet" "internet" "$board:blue:internet" "eth0.2"
+	set_wifi_led "$board:blue:wlan2g"
+	ucidef_set_led_netdev "wifi5g" "wifi5g" "$board:blue:wlan5g" "rai0"
+	;;
+hc5861)
+	ucidef_set_led_default "system" "system" "$board:blue:system" "1"
+	ucidef_set_led_netdev "internet" "internet" "$board:blue:internet" "eth0.2"
+	set_wifi_led "$board:blue:wlan2g"
+	ucidef_set_led_netdev "wifi5g" "wifi5g" "$board:blue:wlan5g" "rai0"
+	ucidef_set_led_default "turbo" "turbo" "$board:blue:turbo" "0"
+	;;
 hg255d)
 	set_wifi_led "$board:green:wlan"
 	set_usb_led "$board:green:usb"

target/linux/ramips/base-files/etc/board.d/02_network

@@ -170,6 +170,13 @@ ramips_setup_interfaces()
 		ucidef_add_switch_vlan "switch1" "1" "0 1 2 3 6t"
 		ucidef_add_switch_vlan "switch1" "2" "4 6t"
 		;;
+	hc5*61|\
+	y1s)
+		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+		ucidef_add_switch "switch0" "1" "1"
+		ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 5 6t"
+		ucidef_add_switch_vlan "switch0" "2" "0 6t"
+		;;
 	m2m)
 		ucidef_add_switch "switch0" "4"
 		ucidef_set_interface_lan "eth0"
@@ -224,12 +231,6 @@ ramips_setup_interfaces()
 		ucidef_add_switch_vlan "switch0" "1" "1 2 6t"
 		ucidef_add_switch_vlan "switch0" "2" "0 6t"
 		;;
-	y1s)
-		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
-		ucidef_add_switch "switch0" "1" "1"
-		ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 5 6t"
-		ucidef_add_switch_vlan "switch0" "2" "0 6t"
-		;;
 	zbt-wr8305rt)
 		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
 		ucidef_add_switch "switch0" "1" "1"
@@ -293,6 +294,11 @@ ramips_setup_macs()
 	e1700)
 		wan_mac=$(mtd_get_mac_ascii config WAN_MAC_ADDR)
 		;;
+	hc5*61)
+		lan_mac=`mtd_get_mac_ascii bdinfo "Vfac_mac "`
+		[ -n "$lan_mac" ] || lan_mac=$(cat /sys/class/net/eth0/address)
+		wan_mac=$(macaddr_add "$lan_mac" 1)
+		;;
 	ht-tm02)
 		lan_mac=$(cat /sys/class/net/eth0/address)
 		;;

target/linux/ramips/base-files/etc/diag.sh

@@ -104,6 +104,11 @@ get_status_led() {
 	f7c027)
 		status_led="$board:orange:status"
 		;;
+	hc5*61|\
+	mlw221|\
+	mlwg2)
+		status_led="$board:blue:system"
+		;;
 	m2m)
 		status_led="$board:blue:wifi"
 		;;
@@ -115,10 +120,6 @@ get_status_led() {
 	zte-q7)
 		status_led="$board:red:status"
 		;;
-	mlw221|\
-	mlwg2)
-		status_led="$board:blue:system"
-		;;
 	mr-102n)
 		status_led="$board:amber:status"
 		;;

target/linux/ramips/base-files/lib/ramips.sh

@@ -169,6 +169,15 @@ ramips_board_detect() {
 	*"FreeStation5")
 		name="freestation5"
 		;;
+	*"HC5661")
+		name="hc5661"
+		;;
+	*"HC5761")
+		name="hc5761"
+		;;
+	*"HC5861")
+		name="hc5861"
+		;;
 	*"HG255D")
 		name="hg255d"
 		;;

target/linux/ramips/base-files/lib/upgrade/platform.sh

@@ -55,6 +55,7 @@ platform_check_image() {
 	firewrt|\
 	fonera20n|\
 	freestation5|\
+	hc5*61|\
 	hg255d|\
 	hlk-rm04|\
 	hpm|\