ramips: fix whitespace and comment issues in dts

Fix space vs. tabs issue and trainling whitespaces. Use C style
comments or drop the comments if they explain what is already to see in
the devicetree parameters.

Signed-off-by: Mathias Kresin <dev@kresin.me>
This commit is contained in:
Mathias Kresin 2018-07-22 10:33:42 +02:00
parent 53624c1702
commit bfd65fc4ab
28 changed files with 80 additions and 84 deletions

View file

@ -14,11 +14,6 @@
gpio-leds {
compatible = "gpio-leds";
// Only USB LED is connected to GPIO.
// All of other LEDs are connected directly to
// switch, WiFi chip, Vcc, so they are not controllable
// via GPIO
usb {
label = "11acnas:green:usb";
gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;

View file

@ -21,7 +21,7 @@
simple-audio-card,format = "i2s";
simple-audio-card,bitclock-master = <&dailink0_master>;
simple-audio-card,frame-master = <&dailink0_master>;
simple-audio-card,widgets =
simple-audio-card,widgets =
"Microphone", "Microphone Jack",
"Headphone", "Headphone Jack";
simple-audio-card,routing =

View file

@ -35,7 +35,7 @@
label = "c20-v4:orange:wan";
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
};
wlan5g {
label = "c20-v4:green:wlan5g";
gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;

View file

@ -94,9 +94,11 @@
realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
};
/* Unclear if this is the correct gpio setup; the USB ports are
unpopulated on a stock BR-6475nD, even though the hardware exists
and the headers are there. */
/*
* Unclear if this is the correct gpio setup; the USB ports are
* unpopulated on a stock BR-6475nD, even though the hardware exists
* and the headers are there.
*/
/*
gpio_export {
compatible = "gpio-export";

View file

@ -48,20 +48,24 @@
gpio-export {
compatible = "gpio-export";
// Used to enable power-over-ethernet passthrough from port0 to port1.
// Disable passthrough by default to prevent accidental equipment damage.
/*
* Used to enable power-over-ethernet passthrough from port0 to port1.
* Disable passthrough by default to prevent accidental equipment damage.
*/
poe {
gpio-export,name = "poe-passthrough";
gpio-export,output = <1>; // OUT_INIT_HIGH
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; // GPIO 11, ACTIVE_LOW
gpio-export,output = <1>;
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
};
};
gpio-leds {
compatible = "gpio-leds";
// The following leds are defined in the ArcOS firmware, but reportedly
// not present in the Freestation5 device.
/*
* The following leds are defined in the ArcOS firmware, but reportedly
* not present in the Freestation5 device.
*/
wifi {
label = "freestation5:unknown:wifi";
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;

View file

@ -53,7 +53,7 @@
linux,code = <BTN_0>;
};
BTN_1 {
BTN_1 {
label = "BTN_1";
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
linux,code = <BTN_1>;
@ -72,7 +72,7 @@
&gpio2 {
status = "okay";
};
&gpio3 {
status = "okay";
};

View file

@ -120,14 +120,14 @@
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0xfb0000>;
label = "firmware";
reg = <0x50000 0xfb0000>;
};
};
};

View file

@ -48,7 +48,7 @@
linux,code = <BTN_0>;
};
BTN_1 {
BTN_1 {
label = "BTN_1";
gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
linux,code = <BTN_1>;
@ -67,7 +67,7 @@
&gpio2 {
status = "okay";
};
&gpio3 {
status = "okay";
};

View file

@ -48,7 +48,7 @@
linux,code = <BTN_0>;
};
BTN_1 {
BTN_1 {
label = "BTN_1";
gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
linux,code = <BTN_1>;
@ -67,7 +67,7 @@
&gpio2 {
status = "okay";
};
&gpio3 {
status = "okay";
};

View file

@ -22,15 +22,15 @@
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <20>;
gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
reset {
label = "reset";
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
};

View file

@ -109,20 +109,20 @@
};
&gpio0 {
status = "okay";
status = "okay";
};
&gpio1 {
status = "okay";
status = "okay";
};
&i2c {
status = "okay";
status = "okay";
};
&uart {
status = "okay";
reset-names = "gpio uartf";
status = "okay";
reset-names = "gpio uartf";
};
&pinctrl {

View file

@ -104,7 +104,6 @@
label = "firmware";
reg = <0x50000 0xfb0000>;
};
};
};

View file

@ -113,7 +113,6 @@
reg = <0xf000 0x71000>;
read-only;
};
};
w25q128@1 {

View file

@ -3,10 +3,10 @@
/ {
compatible = "olimex,rt5350f-olinuxino", "ralink,rt5350-soc";
aliases {
serial0 = &uartlite;
serial1 = &uart;
};
aliases {
serial0 = &uartlite;
serial1 = &uart;
};
};

View file

@ -83,7 +83,6 @@
label = "firmware";
reg = <0x50000 0xfb0000>;
};
};
};

View file

@ -27,17 +27,17 @@
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
reset {
label = "reset";
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
wps {
label = "wps";
gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
gpio_export {

View file

@ -77,10 +77,12 @@
};
&spi0 {
/* This board has 2Mb spi flash soldered in and visible
from manufacturer's firmware.
But this SoC shares spi and nand pins,
and current driver does't handle this sharing well */
/*
* This board has 2Mb spi flash soldered in and visible
* from manufacturer's firmware.
* But this SoC shares spi and nand pins,
* and current driver doesn't handle this sharing well
*/
status = "disabled";
m25p80@0 {

View file

@ -13,11 +13,6 @@
gpio-leds {
compatible = "gpio-leds";
// Only USB LED is connected to GPIO.
// All of other LEDs are connected directly to
// switch, WiFi chip, Vcc, so they are not controllable
// via GPIO
usb {
label = "w2914nsv2:green:usb";
gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;

View file

@ -49,7 +49,7 @@
};
&i2c {
status = "okay";
status = "okay";
};
&spi0 {

View file

@ -56,7 +56,7 @@
gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
scm1 {
label = "SCM1";
gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;

View file

@ -133,7 +133,7 @@
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "rgmii2", "mdio", "wdt";
ralink,group = "rgmii2", "mdio", "wdt";
ralink,function = "gpio";
};
};

View file

@ -137,8 +137,10 @@
&pcie {
status = "okay";
// WRC-1167GHBK2-S has MT7615D for 2.4/5 GHz wifi,
// but it's not supported in OpenWrt.
/*
* WRC-1167GHBK2-S has MT7615D for 2.4/5 GHz wifi,
* but it's not supported in OpenWrt.
*/
};
&xhci {

View file

@ -167,8 +167,7 @@
&pcie {
status = "okay";
// WRC-2533GST has MT7615 for 2.4/5 GHz wifi,
// but it's not supported in OpenWrt.
/* WRC-2533GST has MT7615 for 2.4/5 GHz wifi, but it's not supported */
};
&xhci {

View file

@ -17,7 +17,7 @@
label = "wrtnode:blue:indicator";
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
};
};
};
};
&pinctrl {

View file

@ -17,7 +17,7 @@
label = "wrtnode:blue:indicator";
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
};
};
};
};
&pinctrl {

View file

@ -21,7 +21,7 @@
};
};
};
&gpio0 {
status = "okay";
};
@ -88,7 +88,7 @@
ieee80211-freq-limit = <5000000 6000000>;
};
};
&wmac {
ralink,mtd-eeprom = <&factory 0>;
pinctrl-names = "default";

View file

@ -13,11 +13,11 @@
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
/* GPIO 54、55、56 USB1、2、3 */
usb0 {
gpio-export,name = "usb0";
gpio-export,output = <1>; // GPIOF_OUT_INIT_HIGH
gpios = <&gpio2 14 GPIO_ACTIVE_HIGH>; // GPIO2:40+14=GPIO 54
gpio-export,output = <1>;
gpios = <&gpio2 14 GPIO_ACTIVE_HIGH>;
};
usb1 {
gpio-export,name = "usb1";

View file

@ -155,13 +155,13 @@
};
cpc: cpc@1fbf0000 {
compatible = "mtk,mt7621-cpc";
reg = <0x1fbf0000 0x8000>;
compatible = "mtk,mt7621-cpc";
reg = <0x1fbf0000 0x8000>;
};
mc: mc@1fbf8000 {
compatible = "mtk,mt7621-mc";
reg = <0x1fbf8000 0x8000>;
compatible = "mtk,mt7621-mc";
reg = <0x1fbf8000 0x8000>;
};
uartlite: uartlite@c00 {