KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

ramips: add support for WR8305RT board

Browse source 
Signed-off-by: Jorge Vargas <jorge.vargas@sosvia.com>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41584
This commit is contained in:
John Crispin 2014-07-12 06:54:03 +00:00
parent 91e2f1e9a6
commit ba3988fb16
9 changed files with 137 additions and 1 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

3
target/linux/ramips/base-files/etc/diag.sh
View file

@ -152,6 +152,9 @@ get_status_led() {
wr512-3gn)
status_led="wr512:green:wps"
;;
wr8305rt)
status_led="wr8305rt:sys"
;;
wnce2001)
status_led="netgear:green:power"
;;

1
target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
View file

@ -120,6 +120,7 @@ case "$FIRMWARE" in
wnce2001 | \
wr512-3gn | \
wr6202 | \
wr8305rt | \
wrtnode | \
mzk-w300nh2 | \
ur-326n4g | \

5
target/linux/ramips/base-files/etc/uci-defaults/01_leds
View file

@ -186,6 +186,11 @@ case $board in
set_wifi_led "zbtlink:blue:air"
set_usb_led "zbtlink:blue:usb"
;;
wr8305rt)
ucidef_set_led_default "power" "power" "wr8305rt:sys" "1"
set_usb_led "wr8305rt:usb"
set_wifi_led "wr8305rt:wifi"
;;
esac
ucidef_commit_leds

12
target/linux/ramips/base-files/etc/uci-defaults/02_network
View file

@ -163,6 +163,13 @@ ramips_setup_interfaces()
ucidef_add_switch_vlan "switch0" "2" "6t"
;;
wr8305rt)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4 6t"
ucidef_add_switch_vlan "switch0" "2" "4 6t"
;;
d105 | \
na930 | \
omni-emb-hpm|\
@ -245,6 +252,11 @@ ramips_setup_macs()
wan_mac=$(macaddr_add "$lan_mac" 1)
;;
wr8305rt)
lan_mac=$(mtd_get_mac_binary factory 4)
wan_mac=$(macaddr_add "$lan_mac" 1)
;;
*)
wan_mac=$(macaddr_add "$lan_mac" 1)
;;

3
target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
View file

@ -17,7 +17,8 @@ preinit_set_mac_address() {
w150m | \
mzk-w300nh2 |\
wl-330n |\
wl-330n3g)
wl-330n3g |\
wr8305rt)
mac=$(mtd_get_mac_binary factory 4)
ifconfig eth0 hw ether $mac 2>/dev/null
;;

3
target/linux/ramips/base-files/lib/ramips.sh
View file

@ -310,6 +310,9 @@ ramips_board_detect() {
*"Zbtlink ZBT-WA05")
name="zbt-wa05"
;;
*"ZBT WR8305RT")
name="wr8305rt"
;;
*)
name="generic"
;;

1
target/linux/ramips/base-files/lib/upgrade/platform.sh
View file

@ -89,6 +89,7 @@ platform_check_image() {
ur-336un |\
wr512-3gn |\
wmr300 |\
wr8305rt |\
wrtnode |\
x5 |\
x8 |\

108
target/linux/ramips/dts/WR8305RT.dts Normal file
View file

@ -0,0 +1,108 @@
/dts-v1/;
/include/ "mt7620n.dtsi"
/ {
compatible = "wr8305rt", "ralink,mt7620n-soc";
model = "ZBT WR8305RT";
palmbus@10000000 {
gpio1: gpio@638 {
status = "okay";
};
gpio3: gpio@688 {
status = "okay";
};
spi@b00 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "mx25l6405d";
reg = <0 0>;
linux,modalias = "m25p80", "en25q64";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
};
ehci@101c0000 {
status = "okay";
};
ohci@101c1000 {
status = "okay";
};
ethernet@10100000 {
mtd-mac-address = <&factory 0x4>;
ralink,port-map = "llllw";
};
pinctrl {
state_default: pinctrl0 {
ephy {
ralink,group = "ephy";
ralink,function = "ephy";
};
default {
ralink,group = "i2c", "uartf", "spi refclk", "wled";
ralink,function = "gpio";
};
};
};
gpio-leds {
compatible = "gpio-leds";
sys {
label = "wr8305rt:sys";
gpios = <&gpio1 14 1>;
};
lan {
label = "wr8305rt:usb";
gpios = <&gpio1 15 1>;
};
wifi {
label = "wr8305rt:wifi";
gpios = <&gpio3 0 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 1 1>;
linux,code = <0x198>;
};
};
};

2
target/linux/ramips/image/Makefile
View file

@ -737,6 +737,7 @@ endif
Image/Build/Profile/WMR300=$(call BuildFirmware/Default8M/$(1),$(1),wmr-300,WMR300)
Image/Build/Profile/RT-N14U=$(call BuildFirmware/Default8M/$(1),$(1),rt-n14u,RT-N14U)
Image/Build/Profile/WR8305RT=$(call BuildFirmware/Default8M/$(1),$(1),wr8305rt,WR8305RT)
Image/Build/Profile/WRTNODE=$(call BuildFirmware/Default16M/$(1),$(1),wrtnode,WRTNODE)
Image/Build/Profile/ZBT-WA05=$(call BuildFirmware/Default8M/$(1),$(1),zbt-wa05,ZBT-WA05)
@ -744,6 +745,7 @@ ifeq ($(SUBTARGET),mt7620n)
define Image/Build/Profile/Default
$(call Image/Build/Profile/WMR300,$(1))
$(call Image/Build/Profile/RT-N14U,$(1))
$(call Image/Build/Profile/WR8305RT,$(1))
$(call Image/Build/Profile/WRTNODE,$(1))
$(call Image/Build/Profile/ZBT-WA05,$(1))
endef