upgrade to 2.6.37.1
SVN-Revision: 25706
This commit is contained in:
Imre Kaloz
parent
a3989e3dbd
commit
b84d1996ba
8 changed files with 109 additions and 706 deletions
|
|
@ -1,5 +1,5 @@
|
|||
#
|
||||
# Copyright (C) 2009-2010 OpenWrt.org
|
||||
# Copyright (C) 2009-2011 OpenWrt.org
|
||||
#
|
||||
# This is free software, licensed under the GNU General Public License v2.
|
||||
# See /LICENSE for more information.
|
||||
|
|
@ -13,7 +13,7 @@ FEATURES:=squashfs
|
|||
CFLAGS:=-Os -pipe -march=armv4 -mtune=arm9tdmi -funit-at-a-time
|
||||
MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
|
||||
|
||||
LINUX_VERSION:=2.6.32.29
|
||||
LINUX_VERSION:=2.6.37.1
|
||||
|
||||
include $(INCLUDE_DIR)/target.mk
|
||||
|
||||
|
|
|
|||
|
|
@ -8,7 +8,7 @@
|
|||
|
||||
/*
|
||||
* Debugging stuff
|
||||
@@ -337,7 +338,7 @@ params: ldr r0, =params_phys
|
||||
@@ -355,7 +356,7 @@ params: ldr r0, =0x10000100 @ params_p
|
||||
* This routine must preserve:
|
||||
* r4, r5, r6, r7, r8
|
||||
*/
|
||||
|
|
@ -17,7 +17,7 @@
|
|||
cache_on: mov r3, #8 @ cache_on function
|
||||
b call_cache_fn
|
||||
|
||||
@@ -519,7 +520,7 @@ __common_mmu_cache_on:
|
||||
@@ -544,7 +545,7 @@ __common_mmu_cache_on:
|
||||
mcr p15, 0, r3, c2, c0, 0 @ load page table pointer
|
||||
mcr p15, 0, r1, c3, c0, 0 @ load domain access control
|
||||
b 1f
|
||||
|
|
@ -26,7 +26,7 @@
|
|||
1: mcr p15, 0, r0, c1, c0, 0 @ load control register
|
||||
mrc p15, 0, r0, c1, c0, 0 @ and read it back to
|
||||
sub pc, lr, r0, lsr #32 @ properly flush pipeline
|
||||
@@ -538,7 +539,7 @@ __common_mmu_cache_on:
|
||||
@@ -563,7 +564,7 @@ __common_mmu_cache_on:
|
||||
* r8 = atags pointer
|
||||
* r9-r12,r14 = corrupted
|
||||
*/
|
||||
|
|
@ -35,16 +35,16 @@
|
|||
reloc_start: add r9, r5, r0
|
||||
sub r9, r9, #128 @ do not copy the stack
|
||||
debug_reloc_start
|
||||
@@ -766,7 +767,7 @@ proc_types:
|
||||
* On exit, r0, r1, r2, r3, r9, r12 corrupted
|
||||
* This routine must preserve: r4, r6, r7
|
||||
@@ -793,7 +794,7 @@ proc_types:
|
||||
* This routine must preserve:
|
||||
* r4, r6, r7
|
||||
*/
|
||||
- .align 5
|
||||
+ .align L1_CACHE_SHIFT
|
||||
cache_off: mov r3, #12 @ cache_off function
|
||||
b call_cache_fn
|
||||
|
||||
@@ -841,7 +842,7 @@ __armv3_mmu_cache_off:
|
||||
@@ -868,7 +869,7 @@ __armv3_mmu_cache_off:
|
||||
* This routine must preserve:
|
||||
* r0, r4, r5, r6, r7
|
||||
*/
|
||||
|
|
@ -53,40 +53,37 @@
|
|||
cache_clean_flush:
|
||||
mov r3, #16
|
||||
b call_cache_fn
|
||||
--- a/arch/arm/include/asm/dma-mapping.h
|
||||
+++ b/arch/arm/include/asm/dma-mapping.h
|
||||
@@ -98,7 +98,7 @@ static inline int dma_set_mask(struct de
|
||||
|
||||
static inline int dma_get_cache_alignment(void)
|
||||
{
|
||||
- return 32;
|
||||
+ return L1_CACHE_BYTES;
|
||||
}
|
||||
|
||||
static inline int dma_is_consistent(struct device *dev, dma_addr_t handle)
|
||||
--- a/arch/arm/Kconfig
|
||||
+++ b/arch/arm/Kconfig
|
||||
@@ -923,7 +923,7 @@ config ISA_DMA_API
|
||||
@@ -307,6 +307,7 @@ config ARCH_GEMINI
|
||||
select CPU_FA526
|
||||
select ARCH_REQUIRE_GPIOLIB
|
||||
select ARCH_USES_GETTIMEOFFSET
|
||||
+ select PCI
|
||||
help
|
||||
Support for the Cortina Systems Gemini family SoCs
|
||||
|
||||
@@ -1164,7 +1165,7 @@ config ISA_DMA_API
|
||||
bool
|
||||
|
||||
config PCI
|
||||
- bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695 || MACH_ARMCORE
|
||||
+ bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695 || MACH_ARMCORE || ARCH_GEMINI
|
||||
- bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695 || MACH_ARMCORE || ARCH_CNS3XXX
|
||||
+ bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695 || MACH_ARMCORE || ARCH_CNS3XXX || ARCH_GEMINI
|
||||
help
|
||||
Find out whether you have a PCI motherboard. PCI is the name of a
|
||||
bus system, i.e. the way the CPU talks to the other stuff inside
|
||||
--- a/arch/arm/kernel/entry-armv.S
|
||||
+++ b/arch/arm/kernel/entry-armv.S
|
||||
@@ -22,6 +22,7 @@
|
||||
#include <asm/thread_notify.h>
|
||||
@@ -23,6 +23,7 @@
|
||||
#include <asm/unwind.h>
|
||||
#include <asm/unistd.h>
|
||||
#include <asm/tls.h>
|
||||
+#include <asm/cache.h>
|
||||
|
||||
#include "entry-header.S"
|
||||
|
||||
@@ -166,7 +167,7 @@ ENDPROC(__und_invalid)
|
||||
asm_trace_hardirqs_off
|
||||
@@ -167,7 +168,7 @@ ENDPROC(__und_invalid)
|
||||
stmia r5, {r0 - r4}
|
||||
.endm
|
||||
|
||||
- .align 5
|
||||
|
|
@ -94,7 +91,7 @@
|
|||
__dabt_svc:
|
||||
svc_entry
|
||||
|
||||
@@ -214,7 +215,7 @@ __dabt_svc:
|
||||
@@ -215,7 +216,7 @@ __dabt_svc:
|
||||
UNWIND(.fnend )
|
||||
ENDPROC(__dabt_svc)
|
||||
|
||||
|
|
@ -103,7 +100,7 @@
|
|||
__irq_svc:
|
||||
svc_entry
|
||||
|
||||
@@ -255,7 +256,7 @@ svc_preempt:
|
||||
@@ -259,7 +260,7 @@ svc_preempt:
|
||||
b 1b
|
||||
#endif
|
||||
|
||||
|
|
@ -112,7 +109,7 @@
|
|||
__und_svc:
|
||||
#ifdef CONFIG_KPROBES
|
||||
@ If a kprobe is about to simulate a "stmdb sp..." instruction,
|
||||
@@ -301,7 +302,7 @@ __und_svc:
|
||||
@@ -305,7 +306,7 @@ __und_svc:
|
||||
UNWIND(.fnend )
|
||||
ENDPROC(__und_svc)
|
||||
|
||||
|
|
@ -121,7 +118,7 @@
|
|||
__pabt_svc:
|
||||
svc_entry
|
||||
|
||||
@@ -337,7 +338,7 @@ __pabt_svc:
|
||||
@@ -341,7 +342,7 @@ __pabt_svc:
|
||||
UNWIND(.fnend )
|
||||
ENDPROC(__pabt_svc)
|
||||
|
||||
|
|
@ -130,7 +127,7 @@
|
|||
.LCcralign:
|
||||
.word cr_alignment
|
||||
#ifdef MULTI_DABORT
|
||||
@@ -412,7 +413,7 @@ ENDPROC(__pabt_svc)
|
||||
@@ -414,7 +415,7 @@ ENDPROC(__pabt_svc)
|
||||
#endif
|
||||
.endm
|
||||
|
||||
|
|
@ -139,7 +136,7 @@
|
|||
__dabt_usr:
|
||||
usr_entry
|
||||
kuser_cmpxchg_check
|
||||
@@ -444,7 +445,7 @@ __dabt_usr:
|
||||
@@ -446,7 +447,7 @@ __dabt_usr:
|
||||
UNWIND(.fnend )
|
||||
ENDPROC(__dabt_usr)
|
||||
|
||||
|
|
@ -148,7 +145,7 @@
|
|||
__irq_usr:
|
||||
usr_entry
|
||||
kuser_cmpxchg_check
|
||||
@@ -476,7 +477,7 @@ ENDPROC(__irq_usr)
|
||||
@@ -475,7 +476,7 @@ ENDPROC(__irq_usr)
|
||||
|
||||
.ltorg
|
||||
|
||||
|
|
@ -157,7 +154,7 @@
|
|||
__und_usr:
|
||||
usr_entry
|
||||
|
||||
@@ -692,7 +693,7 @@ __und_usr_unknown:
|
||||
@@ -691,7 +692,7 @@ __und_usr_unknown:
|
||||
b do_undefinstr
|
||||
ENDPROC(__und_usr_unknown)
|
||||
|
||||
|
|
@ -166,7 +163,7 @@
|
|||
__pabt_usr:
|
||||
usr_entry
|
||||
|
||||
@@ -803,7 +804,7 @@ ENDPROC(__switch_to)
|
||||
@@ -805,7 +806,7 @@ ENDPROC(__switch_to)
|
||||
#endif
|
||||
.endm
|
||||
|
||||
|
|
@ -175,7 +172,7 @@
|
|||
.globl __kuser_helper_start
|
||||
__kuser_helper_start:
|
||||
|
||||
@@ -843,7 +844,7 @@ __kuser_memory_barrier: @ 0xffff0fa0
|
||||
@@ -845,7 +846,7 @@ __kuser_memory_barrier: @ 0xffff0fa0
|
||||
smp_dmb
|
||||
usr_ret lr
|
||||
|
||||
|
|
@ -184,7 +181,7 @@
|
|||
|
||||
/*
|
||||
* Reference prototype:
|
||||
@@ -975,7 +976,7 @@ kuser_cmpxchg_fixup:
|
||||
@@ -972,7 +973,7 @@ kuser_cmpxchg_fixup:
|
||||
|
||||
#endif
|
||||
|
||||
|
|
@ -193,7 +190,7 @@
|
|||
|
||||
/*
|
||||
* Reference prototype:
|
||||
@@ -1058,7 +1059,7 @@ __kuser_helper_end:
|
||||
@@ -1050,7 +1051,7 @@ __kuser_helper_end:
|
||||
* of which is copied into r0 for the mode specific abort handler.
|
||||
*/
|
||||
.macro vector_stub, name, mode, correction=0
|
||||
|
|
@ -202,7 +199,7 @@
|
|||
|
||||
vector_\name:
|
||||
.if \correction
|
||||
@@ -1189,7 +1190,7 @@ __stubs_start:
|
||||
@@ -1181,7 +1182,7 @@ __stubs_start:
|
||||
.long __und_invalid @ e
|
||||
.long __und_invalid @ f
|
||||
|
||||
|
|
@ -211,7 +208,7 @@
|
|||
|
||||
/*=============================================================================
|
||||
* Undefined FIQs
|
||||
@@ -1219,7 +1220,7 @@ vector_addrexcptn:
|
||||
@@ -1211,7 +1212,7 @@ vector_addrexcptn:
|
||||
* We group all the following data together to optimise
|
||||
* for CPUs with separate I & D caches.
|
||||
*/
|
||||
|
|
@ -238,7 +235,7 @@
|
|||
/*
|
||||
* This is the fast syscall return path. We do as little as
|
||||
* possible here, and this includes saving r0 back into the SVC
|
||||
@@ -183,7 +184,7 @@ ftrace_stub:
|
||||
@@ -266,7 +267,7 @@ ENDPROC(ftrace_stub)
|
||||
#define A710(code...)
|
||||
#endif
|
||||
|
||||
|
|
@ -247,7 +244,7 @@
|
|||
ENTRY(vector_swi)
|
||||
sub sp, sp, #S_FRAME_SIZE
|
||||
stmia sp, {r0 - r12} @ Calling r0 - r12
|
||||
@@ -316,7 +317,7 @@ __sys_trace_return:
|
||||
@@ -410,7 +411,7 @@ __sys_trace_return:
|
||||
bl syscall_trace
|
||||
b ret_slow_syscall
|
||||
|
||||
|
|
@ -264,9 +261,9 @@
|
|||
#include <asm/system.h>
|
||||
+#include <asm/cache.h>
|
||||
|
||||
#if (PHYS_OFFSET & 0x001fffff)
|
||||
#error "PHYS_OFFSET must be at an even 2MiB boundary!"
|
||||
@@ -192,7 +193,7 @@ ENDPROC(__enable_mmu)
|
||||
#ifdef CONFIG_DEBUG_LL
|
||||
#include <mach/debug-macro.S>
|
||||
@@ -378,7 +379,7 @@ ENDPROC(__enable_mmu)
|
||||
*
|
||||
* other registers depend on the function called upon completion
|
||||
*/
|
||||
|
|
@ -275,41 +272,6 @@
|
|||
__turn_mmu_on:
|
||||
mov r0, r0
|
||||
mcr p15, 0, r0, c1, c0, 0 @ write control reg
|
||||
--- a/arch/arm/kernel/vmlinux.lds.S
|
||||
+++ b/arch/arm/kernel/vmlinux.lds.S
|
||||
@@ -7,6 +7,7 @@
|
||||
#include <asm/thread_info.h>
|
||||
#include <asm/memory.h>
|
||||
#include <asm/page.h>
|
||||
+#include <asm/cache.h>
|
||||
|
||||
OUTPUT_ARCH(arm)
|
||||
ENTRY(stext)
|
||||
@@ -59,7 +60,7 @@ SECTIONS
|
||||
*(.security_initcall.init)
|
||||
__security_initcall_end = .;
|
||||
#ifdef CONFIG_BLK_DEV_INITRD
|
||||
- . = ALIGN(32);
|
||||
+ . = ALIGN(L1_CACHE_BYTES);
|
||||
__initramfs_start = .;
|
||||
usr/built-in.o(.init.ramfs)
|
||||
__initramfs_end = .;
|
||||
@@ -176,13 +177,13 @@ SECTIONS
|
||||
/*
|
||||
* then the cacheline aligned data
|
||||
*/
|
||||
- . = ALIGN(32);
|
||||
+ . = ALIGN(L1_CACHE_BYTES);
|
||||
*(.data.cacheline_aligned)
|
||||
|
||||
/*
|
||||
* The exception fixup table (might need resorting at runtime)
|
||||
*/
|
||||
- . = ALIGN(32);
|
||||
+ . = ALIGN(L1_CACHE_BYTES);
|
||||
__start___ex_table = .;
|
||||
#ifdef CONFIG_MMU
|
||||
*(__ex_table)
|
||||
--- a/arch/arm/lib/memchr.S
|
||||
+++ b/arch/arm/lib/memchr.S
|
||||
@@ -11,9 +11,10 @@
|
||||
|
|
@ -408,169 +370,6 @@
|
|||
ENTRY(strrchr)
|
||||
mov r3, #0
|
||||
1: ldrb r2, [r0], #1
|
||||
--- /dev/null
|
||||
+++ b/arch/arm/mach-gemini/board-nas4220b.c
|
||||
@@ -0,0 +1,160 @@
|
||||
+/*
|
||||
+ * Support for Raidsonic NAS-4220-B
|
||||
+ *
|
||||
+ * Copyright (C) 2009 Janos Laube <janos.dev@gmail.com>
|
||||
+ *
|
||||
+ * based on rut1xx.c
|
||||
+ * Copyright (C) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
|
||||
+ *
|
||||
+ * This program is free software; you can redistribute it and/or modify
|
||||
+ * it under the terms of the GNU General Public License as published by
|
||||
+ * the Free Software Foundation; either version 2 of the License, or
|
||||
+ * (at your option) any later version.
|
||||
+ */
|
||||
+
|
||||
+#include <linux/kernel.h>
|
||||
+#include <linux/init.h>
|
||||
+#include <linux/platform_device.h>
|
||||
+#include <linux/leds.h>
|
||||
+#include <linux/input.h>
|
||||
+#include <linux/gpio_keys.h>
|
||||
+#include <linux/mdio-gpio.h>
|
||||
+#include <linux/io.h>
|
||||
+
|
||||
+#include <asm/setup.h>
|
||||
+#include <asm/mach-types.h>
|
||||
+#include <asm/mach/arch.h>
|
||||
+#include <asm/mach/time.h>
|
||||
+
|
||||
+#include <mach/gmac.h>
|
||||
+#include <mach/hardware.h>
|
||||
+#include <mach/global_reg.h>
|
||||
+
|
||||
+#include "common.h"
|
||||
+
|
||||
+static struct sys_timer ib4220b_timer = {
|
||||
+ .init = gemini_timer_init,
|
||||
+};
|
||||
+
|
||||
+static struct gpio_led ib4220b_leds[] = {
|
||||
+ {
|
||||
+ .name = "nas4220b:orange:hdd",
|
||||
+ .default_trigger = "ide-disk",
|
||||
+ .gpio = 60,
|
||||
+ },
|
||||
+ {
|
||||
+ .name = "nas4220b:green:os",
|
||||
+ .default_trigger = "heartbeat",
|
||||
+ .gpio = 62,
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+static struct gpio_led_platform_data ib4220b_leds_data = {
|
||||
+ .num_leds = ARRAY_SIZE(ib4220b_leds),
|
||||
+ .leds = ib4220b_leds,
|
||||
+};
|
||||
+
|
||||
+static struct platform_device ib4220b_led_device = {
|
||||
+ .name = "leds-gpio",
|
||||
+ .id = -1,
|
||||
+ .dev = {
|
||||
+ .platform_data = &ib4220b_leds_data,
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+static struct gpio_keys_button ib4220b_keys[] = {
|
||||
+ {
|
||||
+ .code = KEY_SETUP,
|
||||
+ .gpio = 61,
|
||||
+ .active_low = 1,
|
||||
+ .desc = "Backup Button",
|
||||
+ .type = EV_KEY,
|
||||
+ },
|
||||
+ {
|
||||
+ .code = KEY_RESTART,
|
||||
+ .gpio = 63,
|
||||
+ .active_low = 1,
|
||||
+ .desc = "Softreset Button",
|
||||
+ .type = EV_KEY,
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+static struct gpio_keys_platform_data ib4220b_keys_data = {
|
||||
+ .buttons = ib4220b_keys,
|
||||
+ .nbuttons = ARRAY_SIZE(ib4220b_keys),
|
||||
+};
|
||||
+
|
||||
+static struct platform_device ib4220b_key_device = {
|
||||
+ .name = "gpio-keys",
|
||||
+ .id = -1,
|
||||
+ .dev = {
|
||||
+ .platform_data = &ib4220b_keys_data,
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+static struct mdio_gpio_platform_data ib4220b_mdio = {
|
||||
+ .mdc = 22,
|
||||
+ .mdio = 21,
|
||||
+ .phy_mask = ~(1 << 1),
|
||||
+};
|
||||
+
|
||||
+static struct platform_device ib4220b_phy_device = {
|
||||
+ .name = "mdio-gpio",
|
||||
+ .id = 0,
|
||||
+ .dev = {
|
||||
+ .platform_data = &ib4220b_mdio,
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+static struct gemini_gmac_platform_data ib4220b_gmac_data = {
|
||||
+ .bus_id[0] = "0:01",
|
||||
+ .interface[0] = PHY_INTERFACE_MODE_RGMII,
|
||||
+};
|
||||
+
|
||||
+static void __init gmac_ib4220b_init(void)
|
||||
+{
|
||||
+ unsigned int val;
|
||||
+
|
||||
+ val = __raw_readl(IO_ADDRESS(GEMINI_GLOBAL_BASE) +
|
||||
+ GLOBAL_IO_DRIVING_CTRL);
|
||||
+ val |= (0x3 << GMAC0_PADS_SHIFT) | (0x3 << GMAC1_PADS_SHIFT);
|
||||
+ __raw_writel(val, IO_ADDRESS(GEMINI_GLOBAL_BASE) +
|
||||
+ GLOBAL_IO_DRIVING_CTRL);
|
||||
+
|
||||
+ val = (0x0 << GMAC0_RXDV_SKEW_SHIFT) | (0xf << GMAC0_RXC_SKEW_SHIFT) |
|
||||
+ (0x7 << GMAC0_TXEN_SKEW_SHIFT) | (0xa << GMAC0_TXC_SKEW_SHIFT) |
|
||||
+ (0x0 << GMAC1_RXDV_SKEW_SHIFT) | (0xf << GMAC1_RXC_SKEW_SHIFT) |
|
||||
+ (0x7 << GMAC1_TXEN_SKEW_SHIFT) | (0xa << GMAC1_TXC_SKEW_SHIFT);
|
||||
+ __raw_writel(val, IO_ADDRESS(GEMINI_GLOBAL_BASE) +
|
||||
+ GLOBAL_GMAC_CTRL_SKEW_CTRL);
|
||||
+
|
||||
+ val = __raw_readl(IO_ADDRESS(GEMINI_GLOBAL_BASE) +
|
||||
+ GLOBAL_ARBITRATION1_CTRL);
|
||||
+ val |= (0x20 << BURST_LENGTH_SHIFT);
|
||||
+ __raw_writel(val, IO_ADDRESS(GEMINI_GLOBAL_BASE) +
|
||||
+ GLOBAL_ARBITRATION1_CTRL);
|
||||
+}
|
||||
+
|
||||
+static void __init ib4220b_init(void)
|
||||
+{
|
||||
+ gemini_gpio_init();
|
||||
+ gmac_ib4220b_init();
|
||||
+ platform_register_uart();
|
||||
+ platform_register_usb(0);
|
||||
+ platform_register_usb(1);
|
||||
+ platform_register_pflash(SZ_16M, NULL, 0);
|
||||
+ platform_device_register(&ib4220b_led_device);
|
||||
+ platform_device_register(&ib4220b_key_device);
|
||||
+ platform_device_register(&ib4220b_phy_device);
|
||||
+ platform_register_ethernet(&ib4220b_gmac_data);
|
||||
+}
|
||||
+
|
||||
+MACHINE_START(NAS4220B, "Raidsonic NAS IB-4220-B")
|
||||
+ .phys_io = 0x7fffc000,
|
||||
+ .io_pg_offst = ((0xffffc000) >> 18) & 0xfffc,
|
||||
+ .boot_params = 0x100,
|
||||
+ .map_io = gemini_map_io,
|
||||
+ .init_irq = gemini_init_irq,
|
||||
+ .timer = &ib4220b_timer,
|
||||
+ .init_machine = ib4220b_init,
|
||||
+MACHINE_END
|
||||
--- a/arch/arm/mach-gemini/board-rut1xx.c
|
||||
+++ b/arch/arm/mach-gemini/board-rut1xx.c
|
||||
@@ -14,13 +14,35 @@
|
||||
|
|
@ -852,32 +651,16 @@
|
|||
+#define NR_IRQS (NORMAL_IRQ_NUM + PCI_IRQ_NUM + GPIO_IRQ_NUM)
|
||||
|
||||
#endif /* __MACH_IRQS_H__ */
|
||||
--- a/arch/arm/mach-gemini/Kconfig
|
||||
+++ b/arch/arm/mach-gemini/Kconfig
|
||||
@@ -2,6 +2,13 @@ if ARCH_GEMINI
|
||||
|
||||
menu "Cortina Systems Gemini Implementations"
|
||||
|
||||
+config MACH_NAS4220B
|
||||
+ bool "Raidsonic NAS-4220-B"
|
||||
+ select GEMINI_MEM_SWAP
|
||||
+ help
|
||||
+ Say Y here if you intend to run this kernel on a
|
||||
+ Raidsonic NAS-4220-B.
|
||||
+
|
||||
config MACH_RUT100
|
||||
bool "Teltonika RUT100"
|
||||
select GEMINI_MEM_SWAP
|
||||
--- a/arch/arm/mach-gemini/Makefile
|
||||
+++ b/arch/arm/mach-gemini/Makefile
|
||||
@@ -6,5 +6,8 @@
|
||||
@@ -6,6 +6,8 @@
|
||||
|
||||
obj-y := irq.o mm.o time.o devices.o gpio.o
|
||||
|
||||
+obj-$(CONFIG_PCI) += pci.o
|
||||
+
|
||||
# Board-specific support
|
||||
+obj-$(CONFIG_MACH_NAS4220B) += board-nas4220b.o
|
||||
obj-$(CONFIG_MACH_NAS4220B) += board-nas4220b.o
|
||||
obj-$(CONFIG_MACH_RUT100) += board-rut1xx.o
|
||||
--- a/arch/arm/mach-gemini/mm.c
|
||||
+++ b/arch/arm/mach-gemini/mm.c
|
||||
|
|
@ -2373,14 +2156,14 @@
|
|||
+ filter.bits.unicast = 1;
|
||||
+ mc_filter[1] = mc_filter[0] = 0xffffffff;
|
||||
+ } else {
|
||||
+ struct dev_mc_list *mclist;
|
||||
+ struct netdev_hw_addr *ha;
|
||||
+
|
||||
+ filter.bits.broadcast = 1;
|
||||
+ filter.bits.multicast = 1;
|
||||
+ filter.bits.unicast = 1;
|
||||
+ mc_filter[1] = mc_filter[0] = 0;
|
||||
+ for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count; i++, mclist = mclist->next) {
|
||||
+ bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) & 0x3f;
|
||||
+ netdev_for_each_mc_addr(ha, dev) {
|
||||
+ bit_nr = ether_crc(ETH_ALEN, ha->addr) & 0x3f;
|
||||
+ if (bit_nr <= 32)
|
||||
+ mc_filter[0] = mc_filter[0] | (1 << bit_nr);
|
||||
+ else
|
||||
|
|
@ -4099,7 +3882,7 @@
|
|||
+gemini_negmac-objs := gm_gmac.o
|
||||
--- a/drivers/net/Kconfig
|
||||
+++ b/drivers/net/Kconfig
|
||||
@@ -2126,6 +2126,13 @@ config ACENIC_OMIT_TIGON_I
|
||||
@@ -2068,6 +2068,13 @@ config ACENIC_OMIT_TIGON_I
|
||||
|
||||
The safe and default value for this is N.
|
||||
|
||||
|
|
@ -4115,10 +3898,10 @@
|
|||
depends on PCI
|
||||
--- a/drivers/net/Makefile
|
||||
+++ b/drivers/net/Makefile
|
||||
@@ -247,6 +247,7 @@ pasemi_mac_driver-objs := pasemi_mac.o p
|
||||
obj-$(CONFIG_MLX4_CORE) += mlx4/
|
||||
@@ -257,6 +257,7 @@ obj-$(CONFIG_MLX4_CORE) += mlx4/
|
||||
obj-$(CONFIG_ENC28J60) += enc28j60.o
|
||||
obj-$(CONFIG_ETHOC) += ethoc.o
|
||||
obj-$(CONFIG_GRETH) += greth.o
|
||||
+obj-$(CONFIG_GEMINI_NET_ENGINE_GMAC) += gemini_negmac/
|
||||
|
||||
obj-$(CONFIG_XTENSA_XT2000_SONIC) += xtsonic.o
|
||||
|
|
@ -4587,7 +4370,7 @@
|
|||
+};
|
||||
--- a/drivers/usb/host/ehci.h
|
||||
+++ b/drivers/usb/host/ehci.h
|
||||
@@ -552,7 +552,12 @@ static inline unsigned int
|
||||
@@ -561,7 +561,12 @@ static inline unsigned int
|
||||
ehci_port_speed(struct ehci_hcd *ehci, unsigned int portsc)
|
||||
{
|
||||
if (ehci_is_TDI(ehci)) {
|
||||
|
|
@ -4602,7 +4385,7 @@
|
|||
case 1:
|
||||
--- a/drivers/usb/host/ehci-hcd.c
|
||||
+++ b/drivers/usb/host/ehci-hcd.c
|
||||
@@ -194,9 +194,11 @@ static int ehci_halt (struct ehci_hcd *e
|
||||
@@ -223,9 +223,11 @@ static int ehci_halt (struct ehci_hcd *e
|
||||
if ((temp & STS_HALT) != 0)
|
||||
return 0;
|
||||
|
||||
|
|
@ -4614,7 +4397,7 @@
|
|||
return handshake (ehci, &ehci->regs->status,
|
||||
STS_HALT, STS_HALT, 16 * 125);
|
||||
}
|
||||
@@ -263,8 +265,8 @@ static int ehci_reset (struct ehci_hcd *
|
||||
@@ -292,8 +294,8 @@ static int ehci_reset (struct ehci_hcd *
|
||||
if (retval)
|
||||
return retval;
|
||||
|
||||
|
|
@ -4625,7 +4408,7 @@
|
|||
|
||||
if (ehci->debug)
|
||||
dbgp_external_startup();
|
||||
@@ -397,12 +399,13 @@ static void ehci_silence_controller(stru
|
||||
@@ -427,12 +429,13 @@ static void ehci_silence_controller(stru
|
||||
{
|
||||
ehci_halt(ehci);
|
||||
ehci_turn_off_all_ports(ehci);
|
||||
|
|
@ -4640,7 +4423,7 @@
|
|||
}
|
||||
|
||||
/* ehci_shutdown kick in for silicon on any bus (not just pci, etc).
|
||||
@@ -654,7 +657,9 @@ static int ehci_run (struct usb_hcd *hcd
|
||||
@@ -712,7 +715,9 @@ static int ehci_run (struct usb_hcd *hcd
|
||||
// Philips, Intel, and maybe others need CMD_RUN before the
|
||||
// root hub will detect new devices (why?); NEC doesn't
|
||||
ehci->command &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET);
|
||||
|
|
@ -4650,7 +4433,7 @@
|
|||
ehci_writel(ehci, ehci->command, &ehci->regs->command);
|
||||
dbg_cmd (ehci, "init", ehci->command);
|
||||
|
||||
@@ -674,9 +679,11 @@ static int ehci_run (struct usb_hcd *hcd
|
||||
@@ -732,9 +737,11 @@ static int ehci_run (struct usb_hcd *hcd
|
||||
*/
|
||||
down_write(&ehci_cf_port_reset_rwsem);
|
||||
hcd->state = HC_STATE_RUNNING;
|
||||
|
|
@ -4662,7 +4445,7 @@
|
|||
up_write(&ehci_cf_port_reset_rwsem);
|
||||
ehci->last_periodic_enable = ktime_get_real();
|
||||
|
||||
@@ -768,9 +775,10 @@ static irqreturn_t ehci_irq (struct usb_
|
||||
@@ -827,9 +834,10 @@ static irqreturn_t ehci_irq (struct usb_
|
||||
pcd_status = status;
|
||||
|
||||
/* resume root hub? */
|
||||
|
|
@ -4671,10 +4454,10 @@
|
|||
usb_hcd_resume_root_hub(hcd);
|
||||
-
|
||||
+#endif
|
||||
while (i--) {
|
||||
int pstatus = ehci_readl(ehci,
|
||||
&ehci->regs->port_status [i]);
|
||||
@@ -803,7 +811,9 @@ static irqreturn_t ehci_irq (struct usb_
|
||||
/* get per-port change detect bits */
|
||||
if (ehci->has_ppcd)
|
||||
ppcd = status >> 16;
|
||||
@@ -871,7 +879,9 @@ static irqreturn_t ehci_irq (struct usb_
|
||||
ehci_halt(ehci);
|
||||
dead:
|
||||
ehci_reset(ehci);
|
||||
|
|
@ -4684,7 +4467,7 @@
|
|||
/* generic layer kills/unlinks all urbs, then
|
||||
* uses ehci_stop to clean up the rest
|
||||
*/
|
||||
@@ -1102,6 +1112,11 @@ MODULE_LICENSE ("GPL");
|
||||
@@ -1169,6 +1179,11 @@ MODULE_LICENSE ("GPL");
|
||||
#define PCI_DRIVER ehci_pci_driver
|
||||
#endif
|
||||
|
||||
|
|
@ -4698,7 +4481,7 @@
|
|||
#define PLATFORM_DRIVER ehci_fsl_driver
|
||||
--- a/drivers/usb/host/ehci-hub.c
|
||||
+++ b/drivers/usb/host/ehci-hub.c
|
||||
@@ -809,6 +809,12 @@ static int ehci_hub_control (
|
||||
@@ -929,6 +929,12 @@ static int ehci_hub_control (
|
||||
/* see what we found out */
|
||||
temp = check_reset_complete (ehci, wIndex, status_reg,
|
||||
ehci_readl(ehci, status_reg));
|
||||
|
|
@ -4713,10 +4496,10 @@
|
|||
if (!(temp & (PORT_RESUME|PORT_RESET)))
|
||||
--- a/drivers/usb/Kconfig
|
||||
+++ b/drivers/usb/Kconfig
|
||||
@@ -60,6 +60,7 @@ config USB_ARCH_HAS_EHCI
|
||||
default y if ARCH_IXP4XX
|
||||
default y if ARCH_W90X900
|
||||
@@ -66,6 +66,7 @@ config USB_ARCH_HAS_EHCI
|
||||
default y if ARCH_AT91SAM9G45
|
||||
default y if ARCH_MXC
|
||||
default y if ARCH_OMAP3
|
||||
+ default y if ARCH_GEMINI
|
||||
default PCI
|
||||
|
||||
|
|
@ -4742,6 +4525,7 @@
|
|||
+#include <linux/miscdevice.h>
|
||||
+#include <linux/platform_device.h>
|
||||
+#include <linux/watchdog.h>
|
||||
+#include <linux/slab.h>
|
||||
+
|
||||
+#define GEMINI_WDCOUNTER 0x0
|
||||
+#define GEMINI_WDLOAD 0x4
|
||||
|
|
@ -4924,7 +4708,6 @@
|
|||
+static const struct file_operations gemini_wdt_fops = {
|
||||
+ .owner = THIS_MODULE,
|
||||
+ .llseek = no_llseek,
|
||||
+ .ioctl = gemini_wdt_ioctl,
|
||||
+ .open = gemini_wdt_open,
|
||||
+ .release = gemini_wdt_close,
|
||||
+ .write = gemini_wdt_write,
|
||||
|
|
@ -5094,7 +4877,7 @@
|
|||
+MODULE_ALIAS("platform:gemini-wdt");
|
||||
--- a/drivers/watchdog/Kconfig
|
||||
+++ b/drivers/watchdog/Kconfig
|
||||
@@ -111,6 +111,16 @@ config 977_WATCHDOG
|
||||
@@ -118,6 +118,16 @@ config 977_WATCHDOG
|
||||
|
||||
Not sure? It's safe to say N.
|
||||
|
||||
|
|
@ -5113,7 +4896,7 @@
|
|||
depends on ARCH_IXP2000
|
||||
--- a/drivers/watchdog/Makefile
|
||||
+++ b/drivers/watchdog/Makefile
|
||||
@@ -31,6 +31,7 @@ obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.
|
||||
@@ -32,6 +32,7 @@ obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.
|
||||
obj-$(CONFIG_TWL4030_WATCHDOG) += twl4030_wdt.o
|
||||
obj-$(CONFIG_21285_WATCHDOG) += wdt285.o
|
||||
obj-$(CONFIG_977_WATCHDOG) += wdt977.o
|
||||
|
|
@ -5123,13 +4906,13 @@
|
|||
obj-$(CONFIG_KS8695_WATCHDOG) += ks8695_wdt.o
|
||||
--- a/include/linux/usb/ehci_def.h
|
||||
+++ b/include/linux/usb/ehci_def.h
|
||||
@@ -91,9 +91,9 @@ struct ehci_regs {
|
||||
@@ -105,9 +105,9 @@ struct ehci_regs {
|
||||
u32 frame_list; /* points to periodic list */
|
||||
/* ASYNCLISTADDR: offset 0x18 */
|
||||
u32 async_next; /* address of next async queue head */
|
||||
-
|
||||
+#ifndef CONFIG_ARCH_GEMINI
|
||||
u32 reserved [9];
|
||||
u32 reserved[9];
|
||||
-
|
||||
+#endif
|
||||
/* CONFIGFLAG: offset 0x40 */
|
||||
|
|
@ -5137,13 +4920,14 @@
|
|||
#define FLAG_CF (1<<0) /* true: we'll support "high speed" */
|
||||
--- a/arch/arm/mm/Kconfig
|
||||
+++ b/arch/arm/mm/Kconfig
|
||||
@@ -774,5 +774,6 @@ config CACHE_XSC3L2
|
||||
@@ -806,6 +806,7 @@ config CACHE_XSC3L2
|
||||
|
||||
config ARM_L1_CACHE_SHIFT
|
||||
int
|
||||
+ default 4 if CPU_FA526
|
||||
default 6 if ARCH_OMAP3
|
||||
default 6 if ARM_L1_CACHE_SHIFT_6
|
||||
default 5
|
||||
|
||||
--- a/arch/arm/lib/copy_page.S
|
||||
+++ b/arch/arm/lib/copy_page.S
|
||||
@@ -17,7 +17,7 @@
|
||||
|
|
|
|||
30
target/linux/gemini/patches/002-register_watchdog.patch
Normal file
30
target/linux/gemini/patches/002-register_watchdog.patch
Normal file
|
|
@ -0,0 +1,30 @@
|
|||
--- a/arch/arm/mach-gemini/board-nas4220b.c
|
||||
+++ b/arch/arm/mach-gemini/board-nas4220b.c
|
||||
@@ -95,6 +95,7 @@ static void __init ib4220b_init(void)
|
||||
{
|
||||
gemini_gpio_init();
|
||||
platform_register_uart();
|
||||
+ platform_register_watchdog();
|
||||
platform_register_pflash(SZ_16M, NULL, 0);
|
||||
platform_device_register(&ib4220b_led_device);
|
||||
platform_device_register(&ib4220b_key_device);
|
||||
--- a/arch/arm/mach-gemini/board-wbd111.c
|
||||
+++ b/arch/arm/mach-gemini/board-wbd111.c
|
||||
@@ -126,6 +126,7 @@ static void __init wbd111_init(void)
|
||||
{
|
||||
gemini_gpio_init();
|
||||
platform_register_uart();
|
||||
+ platform_register_watchdog();
|
||||
platform_register_pflash(SZ_8M, wbd111_partitions,
|
||||
wbd111_num_partitions);
|
||||
platform_device_register(&wbd111_leds_device);
|
||||
--- a/arch/arm/mach-gemini/board-wbd222.c
|
||||
+++ b/arch/arm/mach-gemini/board-wbd222.c
|
||||
@@ -126,6 +126,7 @@ static void __init wbd222_init(void)
|
||||
{
|
||||
gemini_gpio_init();
|
||||
platform_register_uart();
|
||||
+ platform_register_watchdog();
|
||||
platform_register_pflash(SZ_8M, wbd222_partitions,
|
||||
wbd222_num_partitions);
|
||||
platform_device_register(&wbd222_leds_device);
|
||||
|
|
@ -1,151 +0,0 @@
|
|||
--- /dev/null
|
||||
+++ b/arch/arm/mach-gemini/board-wbd111.c
|
||||
@@ -0,0 +1,125 @@
|
||||
+/*
|
||||
+ * Support for Wiliboard WBD-111
|
||||
+ *
|
||||
+ * Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org>
|
||||
+ *
|
||||
+ * This program is free software; you can redistribute it and/or modify
|
||||
+ * it under the terms of the GNU General Public License as published by
|
||||
+ * the Free Software Foundation; either version 2 of the License, or
|
||||
+ * (at your option) any later version.
|
||||
+ */
|
||||
+#include <linux/kernel.h>
|
||||
+#include <linux/init.h>
|
||||
+#include <linux/platform_device.h>
|
||||
+#include <linux/leds.h>
|
||||
+#include <linux/input.h>
|
||||
+#include <linux/skbuff.h>
|
||||
+#include <linux/gpio_keys.h>
|
||||
+#include <linux/mdio-gpio.h>
|
||||
+#include <asm/mach-types.h>
|
||||
+#include <asm/mach/arch.h>
|
||||
+#include <asm/mach/time.h>
|
||||
+
|
||||
+#include <mach/gmac.h>
|
||||
+
|
||||
+#include "common.h"
|
||||
+
|
||||
+static struct mdio_gpio_platform_data wbd111_mdio = {
|
||||
+ .mdc = 22,
|
||||
+ .mdio = 21,
|
||||
+ .phy_mask = ~(1 << 1),
|
||||
+};
|
||||
+
|
||||
+static struct platform_device wbd111_phy_device = {
|
||||
+ .name = "mdio-gpio",
|
||||
+ .id = 0,
|
||||
+ .dev = {
|
||||
+ .platform_data = &wbd111_mdio,
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+static struct gemini_gmac_platform_data gmac_data = {
|
||||
+ .bus_id[0] = "0:01",
|
||||
+ .interface[0] = PHY_INTERFACE_MODE_MII,
|
||||
+};
|
||||
+
|
||||
+static struct gpio_keys_button wbd111_keys[] = {
|
||||
+ {
|
||||
+ .code = KEY_SETUP,
|
||||
+ .gpio = 5,
|
||||
+ .active_low = 1,
|
||||
+ .desc = "reset",
|
||||
+ .type = EV_KEY,
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+static struct gpio_keys_platform_data wbd111_keys_data = {
|
||||
+ .buttons = wbd111_keys,
|
||||
+ .nbuttons = ARRAY_SIZE(wbd111_keys),
|
||||
+};
|
||||
+
|
||||
+static struct platform_device wbd111_keys_device = {
|
||||
+ .name = "gpio-keys",
|
||||
+ .id = -1,
|
||||
+ .dev = {
|
||||
+ .platform_data = &wbd111_keys_data,
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+static struct gpio_led wbd111_leds[] = {
|
||||
+ {
|
||||
+ .name = "L3red",
|
||||
+ .gpio = 1,
|
||||
+ },
|
||||
+ {
|
||||
+ .name = "L4green",
|
||||
+ .gpio = 2,
|
||||
+ },
|
||||
+ {
|
||||
+ .name = "L4red",
|
||||
+ .gpio = 3,
|
||||
+ },
|
||||
+ {
|
||||
+ .name = "L3green",
|
||||
+ .gpio = 5,
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+static struct gpio_led_platform_data wbd111_leds_data = {
|
||||
+ .num_leds = ARRAY_SIZE(wbd111_leds),
|
||||
+ .leds = wbd111_leds,
|
||||
+};
|
||||
+
|
||||
+static struct platform_device wbd111_leds_device = {
|
||||
+ .name = "leds-gpio",
|
||||
+ .id = -1,
|
||||
+ .dev = {
|
||||
+ .platform_data = &wbd111_leds_data,
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+static struct sys_timer wbd111_timer = {
|
||||
+ .init = gemini_timer_init,
|
||||
+};
|
||||
+
|
||||
+static void __init wbd111_init(void)
|
||||
+{
|
||||
+ gemini_gpio_init();
|
||||
+ platform_register_uart();
|
||||
+ platform_register_watchdog();
|
||||
+ platform_register_pflash(SZ_8M, NULL, 0);
|
||||
+ platform_device_register(&wbd111_leds_device);
|
||||
+ platform_device_register(&wbd111_keys_device);
|
||||
+ platform_device_register(&wbd111_phy_device);
|
||||
+ platform_register_ethernet(&gmac_data);
|
||||
+}
|
||||
+
|
||||
+MACHINE_START(WBD111, "Wiliboard WBD-111")
|
||||
+ .phys_io = 0x7fffc000,
|
||||
+ .io_pg_offst = ((0xffffc000) >> 18) & 0xfffc,
|
||||
+ .boot_params = 0x100,
|
||||
+ .map_io = gemini_map_io,
|
||||
+ .init_irq = gemini_init_irq,
|
||||
+ .timer = &wbd111_timer,
|
||||
+ .init_machine = wbd111_init,
|
||||
+MACHINE_END
|
||||
--- a/arch/arm/mach-gemini/Kconfig
|
||||
+++ b/arch/arm/mach-gemini/Kconfig
|
||||
@@ -16,6 +16,13 @@ config MACH_RUT100
|
||||
Say Y here if you intend to run this kernel on a
|
||||
Teltonika 3G Router RUT100.
|
||||
|
||||
+config MACH_WBD111
|
||||
+ bool "Wiliboard WBD-111"
|
||||
+ select GEMINI_MEM_SWAP
|
||||
+ help
|
||||
+ Say Y here if you intend to run this kernel on a
|
||||
+ Wiliboard WBD-111.
|
||||
+
|
||||
endmenu
|
||||
|
||||
config GEMINI_MEM_SWAP
|
||||
--- a/arch/arm/mach-gemini/Makefile
|
||||
+++ b/arch/arm/mach-gemini/Makefile
|
||||
@@ -11,3 +11,4 @@ obj-$(CONFIG_PCI) += pci.o
|
||||
# Board-specific support
|
||||
obj-$(CONFIG_MACH_NAS4220B) += board-nas4220b.o
|
||||
obj-$(CONFIG_MACH_RUT100) += board-rut1xx.o
|
||||
+obj-$(CONFIG_MACH_WBD111) += board-wbd111.o
|
||||
|
|
@ -1,64 +0,0 @@
|
|||
--- a/arch/arm/mach-gemini/board-wbd111.c
|
||||
+++ b/arch/arm/mach-gemini/board-wbd111.c
|
||||
@@ -16,6 +16,8 @@
|
||||
#include <linux/skbuff.h>
|
||||
#include <linux/gpio_keys.h>
|
||||
#include <linux/mdio-gpio.h>
|
||||
+#include <linux/mtd/mtd.h>
|
||||
+#include <linux/mtd/partitions.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach/time.h>
|
||||
@@ -102,12 +104,51 @@ static struct sys_timer wbd111_timer = {
|
||||
.init = gemini_timer_init,
|
||||
};
|
||||
|
||||
+#ifdef CONFIG_MTD_PARTITIONS
|
||||
+static struct mtd_partition wbd111_partitions[] = {
|
||||
+ {
|
||||
+ .name = "RedBoot",
|
||||
+ .offset = 0,
|
||||
+ .size = 0x020000,
|
||||
+ .mask_flags = MTD_WRITEABLE,
|
||||
+ } , {
|
||||
+ .name = "kernel",
|
||||
+ .offset = 0x020000,
|
||||
+ .size = 0x100000,
|
||||
+ } , {
|
||||
+ .name = "rootfs",
|
||||
+ .offset = 0x120000,
|
||||
+ .size = 0x6a0000,
|
||||
+ } , {
|
||||
+ .name = "VCTL",
|
||||
+ .offset = 0x7c0000,
|
||||
+ .size = 0x010000,
|
||||
+ .mask_flags = MTD_WRITEABLE,
|
||||
+ } , {
|
||||
+ .name = "cfg",
|
||||
+ .offset = 0x7d0000,
|
||||
+ .size = 0x010000,
|
||||
+ .mask_flags = MTD_WRITEABLE,
|
||||
+ } , {
|
||||
+ .name = "FIS",
|
||||
+ .offset = 0x7e0000,
|
||||
+ .size = 0x010000,
|
||||
+ .mask_flags = MTD_WRITEABLE,
|
||||
+ }
|
||||
+};
|
||||
+#define wbd111_num_partitions ARRAY_SIZE(wbd111_partitions)
|
||||
+#else
|
||||
+#define wbd111_partitions NULL
|
||||
+#define wbd111_num_partitions 0
|
||||
+#endif /* CONFIG_MTD_PARTITIONS */
|
||||
+
|
||||
static void __init wbd111_init(void)
|
||||
{
|
||||
gemini_gpio_init();
|
||||
platform_register_uart();
|
||||
platform_register_watchdog();
|
||||
- platform_register_pflash(SZ_8M, NULL, 0);
|
||||
+ platform_register_pflash(SZ_8M, wbd111_partitions,
|
||||
+ wbd111_num_partitions);
|
||||
platform_device_register(&wbd111_leds_device);
|
||||
platform_device_register(&wbd111_keys_device);
|
||||
platform_device_register(&wbd111_phy_device);
|
||||
|
|
@ -25,8 +25,8 @@
|
|||
#include <linux/module.h>
|
||||
+#include <linux/skbuff.h>
|
||||
#include <linux/mdio-bitbang.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/types.h>
|
||||
#include <linux/delay.h>
|
||||
--- a/drivers/net/phy/mdio-gpio.c
|
||||
+++ b/drivers/net/phy/mdio-gpio.c
|
||||
@@ -25,6 +25,7 @@
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
--- a/drivers/mtd/maps/physmap.c
|
||||
+++ b/drivers/mtd/maps/physmap.c
|
||||
@@ -170,6 +170,13 @@ static int physmap_flash_probe(struct pl
|
||||
@@ -173,6 +173,13 @@ static int physmap_flash_probe(struct pl
|
||||
goto err_out;
|
||||
|
||||
#ifdef CONFIG_MTD_PARTITIONS
|
||||
|
|
@ -14,7 +14,7 @@
|
|||
err = parse_mtd_partitions(info->cmtd, part_probe_types,
|
||||
&info->parts, 0);
|
||||
if (err > 0) {
|
||||
@@ -177,13 +184,6 @@ static int physmap_flash_probe(struct pl
|
||||
@@ -180,13 +187,6 @@ static int physmap_flash_probe(struct pl
|
||||
info->nr_parts = err;
|
||||
return 0;
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,196 +0,0 @@
|
|||
--- a/arch/arm/mach-gemini/Kconfig
|
||||
+++ b/arch/arm/mach-gemini/Kconfig
|
||||
@@ -23,6 +23,13 @@ config MACH_WBD111
|
||||
Say Y here if you intend to run this kernel on a
|
||||
Wiliboard WBD-111.
|
||||
|
||||
+config MACH_WBD222
|
||||
+ bool "Wiliboard WBD-222"
|
||||
+ select GEMINI_MEM_SWAP
|
||||
+ help
|
||||
+ Say Y here if you intend to run this kernel on a
|
||||
+ Wiliboard WBD-222.
|
||||
+
|
||||
endmenu
|
||||
|
||||
config GEMINI_MEM_SWAP
|
||||
--- a/arch/arm/mach-gemini/Makefile
|
||||
+++ b/arch/arm/mach-gemini/Makefile
|
||||
@@ -12,3 +12,4 @@ obj-$(CONFIG_PCI) += pci.o
|
||||
obj-$(CONFIG_MACH_NAS4220B) += board-nas4220b.o
|
||||
obj-$(CONFIG_MACH_RUT100) += board-rut1xx.o
|
||||
obj-$(CONFIG_MACH_WBD111) += board-wbd111.o
|
||||
+obj-$(CONFIG_MACH_WBD222) += board-wbd222.o
|
||||
--- /dev/null
|
||||
+++ b/arch/arm/mach-gemini/board-wbd222.c
|
||||
@@ -0,0 +1,170 @@
|
||||
+/*
|
||||
+ * Support for Wiliboard WBD-222
|
||||
+ *
|
||||
+ * Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org>
|
||||
+ *
|
||||
+ * This program is free software; you can redistribute it and/or modify
|
||||
+ * it under the terms of the GNU General Public License as published by
|
||||
+ * the Free Software Foundation; either version 2 of the License, or
|
||||
+ * (at your option) any later version.
|
||||
+ */
|
||||
+#include <linux/kernel.h>
|
||||
+#include <linux/init.h>
|
||||
+#include <linux/platform_device.h>
|
||||
+#include <linux/leds.h>
|
||||
+#include <linux/input.h>
|
||||
+#include <linux/skbuff.h>
|
||||
+#include <linux/gpio_keys.h>
|
||||
+#include <linux/mdio-gpio.h>
|
||||
+#include <linux/mtd/mtd.h>
|
||||
+#include <linux/mtd/partitions.h>
|
||||
+#include <asm/mach-types.h>
|
||||
+#include <asm/mach/arch.h>
|
||||
+#include <asm/mach/time.h>
|
||||
+
|
||||
+#include <mach/gmac.h>
|
||||
+
|
||||
+#include "common.h"
|
||||
+
|
||||
+static struct mdio_gpio_platform_data wbd222_mdio = {
|
||||
+ .mdc = 22,
|
||||
+ .mdio = 21,
|
||||
+ .phy_mask = ~((1 << 1) | (1 << 3)),
|
||||
+};
|
||||
+
|
||||
+static struct platform_device wbd222_phy_device = {
|
||||
+ .name = "mdio-gpio",
|
||||
+ .id = 0,
|
||||
+ .dev = {
|
||||
+ .platform_data = &wbd222_mdio,
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+static struct gemini_gmac_platform_data gmac_data = {
|
||||
+ .bus_id[0] = "0:01",
|
||||
+ .interface[0] = PHY_INTERFACE_MODE_MII,
|
||||
+ .bus_id[1] = "0:03",
|
||||
+ .interface[1] = PHY_INTERFACE_MODE_MII,
|
||||
+};
|
||||
+
|
||||
+static struct gpio_keys_button wbd222_keys[] = {
|
||||
+ {
|
||||
+ .code = KEY_SETUP,
|
||||
+ .gpio = 5,
|
||||
+ .active_low = 1,
|
||||
+ .desc = "reset",
|
||||
+ .type = EV_KEY,
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+static struct gpio_keys_platform_data wbd222_keys_data = {
|
||||
+ .buttons = wbd222_keys,
|
||||
+ .nbuttons = ARRAY_SIZE(wbd222_keys),
|
||||
+};
|
||||
+
|
||||
+static struct platform_device wbd222_keys_device = {
|
||||
+ .name = "gpio-keys",
|
||||
+ .id = -1,
|
||||
+ .dev = {
|
||||
+ .platform_data = &wbd222_keys_data,
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+static struct gpio_led wbd222_leds[] = {
|
||||
+ {
|
||||
+ .name = "L3red",
|
||||
+ .gpio = 1,
|
||||
+ },
|
||||
+ {
|
||||
+ .name = "L4green",
|
||||
+ .gpio = 2,
|
||||
+ },
|
||||
+ {
|
||||
+ .name = "L4red",
|
||||
+ .gpio = 3,
|
||||
+ },
|
||||
+ {
|
||||
+ .name = "L3green",
|
||||
+ .gpio = 5,
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+static struct gpio_led_platform_data wbd222_leds_data = {
|
||||
+ .num_leds = ARRAY_SIZE(wbd222_leds),
|
||||
+ .leds = wbd222_leds,
|
||||
+};
|
||||
+
|
||||
+static struct platform_device wbd222_leds_device = {
|
||||
+ .name = "leds-gpio",
|
||||
+ .id = -1,
|
||||
+ .dev = {
|
||||
+ .platform_data = &wbd222_leds_data,
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+static struct sys_timer wbd222_timer = {
|
||||
+ .init = gemini_timer_init,
|
||||
+};
|
||||
+
|
||||
+#ifdef CONFIG_MTD_PARTITIONS
|
||||
+static struct mtd_partition wbd222_partitions[] = {
|
||||
+ {
|
||||
+ .name = "RedBoot",
|
||||
+ .offset = 0,
|
||||
+ .size = 0x020000,
|
||||
+ .mask_flags = MTD_WRITEABLE,
|
||||
+ } , {
|
||||
+ .name = "kernel",
|
||||
+ .offset = 0x020000,
|
||||
+ .size = 0x100000,
|
||||
+ } , {
|
||||
+ .name = "rootfs",
|
||||
+ .offset = 0x120000,
|
||||
+ .size = 0x6a0000,
|
||||
+ } , {
|
||||
+ .name = "VCTL",
|
||||
+ .offset = 0x7c0000,
|
||||
+ .size = 0x010000,
|
||||
+ .mask_flags = MTD_WRITEABLE,
|
||||
+ } , {
|
||||
+ .name = "cfg",
|
||||
+ .offset = 0x7d0000,
|
||||
+ .size = 0x010000,
|
||||
+ .mask_flags = MTD_WRITEABLE,
|
||||
+ } , {
|
||||
+ .name = "FIS",
|
||||
+ .offset = 0x7e0000,
|
||||
+ .size = 0x010000,
|
||||
+ .mask_flags = MTD_WRITEABLE,
|
||||
+ }
|
||||
+};
|
||||
+#define wbd222_num_partitions ARRAY_SIZE(wbd222_partitions)
|
||||
+#else
|
||||
+#define wbd222_partitions NULL
|
||||
+#define wbd222_num_partitions 0
|
||||
+#endif /* CONFIG_MTD_PARTITIONS */
|
||||
+
|
||||
+static void __init wbd222_init(void)
|
||||
+{
|
||||
+ gemini_gpio_init();
|
||||
+ platform_register_uart();
|
||||
+ platform_register_watchdog();
|
||||
+ platform_register_pflash(SZ_8M, wbd222_partitions,
|
||||
+ wbd222_num_partitions);
|
||||
+ platform_device_register(&wbd222_leds_device);
|
||||
+ platform_device_register(&wbd222_keys_device);
|
||||
+ platform_device_register(&wbd222_phy_device);
|
||||
+ platform_register_ethernet(&gmac_data);
|
||||
+ platform_register_usb(0);
|
||||
+ platform_register_usb(1);
|
||||
+}
|
||||
+
|
||||
+MACHINE_START(WBD222, "Wiliboard WBD-222")
|
||||
+ .phys_io = 0x7fffc000,
|
||||
+ .io_pg_offst = ((0xffffc000) >> 18) & 0xfffc,
|
||||
+ .boot_params = 0x100,
|
||||
+ .map_io = gemini_map_io,
|
||||
+ .init_irq = gemini_init_irq,
|
||||
+ .timer = &wbd222_timer,
|
||||
+ .init_machine = wbd222_init,
|
||||
+MACHINE_END
|
||||
Loading…
Reference in a new issue