D-Link DIR-320 support (broadcom-diag)

This patch adds D-Link DIR-320 support to broadcom-diag.

"reserved" button is the button on the right side of the router without
any title. I'm not sure if I've selected right name.

Signed-off-by: Leonid Evdokimov <leon@darkk.net.ru>

SVN-Revision: 16443
This commit is contained in:
Hauke Mehrtens 2009-06-14 09:39:43 +00:00
parent c1918c778c
commit b63576359d

View file

@ -123,6 +123,7 @@ enum {
/* D-Link */
DIR130,
DIR320,
DIR330,
DWL3150,
@ -718,6 +719,20 @@ static struct platform_t __initdata platforms[] = {
{ .name = "blue", .gpio = 1 << 6},
},
},
[DIR320] = {
.name = "D-Link DIR-320",
.buttons = {
{ .name = "reserved", .gpio = 1 << 6},
{ .name = "reset", .gpio = 1 << 7},
},
.leds = {
{ .name = "wlan", .gpio = 1 << 0, .polarity = NORMAL },
{ .name = "diag", .gpio = 1 << 1, .polarity = NORMAL }, /* "status led */
{ .name = "red", .gpio = 1 << 3, .polarity = REVERSE },
{ .name = "blue", .gpio = 1 << 4, .polarity = REVERSE },
{ .name = "usb", .gpio = 1 << 5, .polarity = NORMAL },
},
},
[DIR330] = {
.name = "D-Link DIR-330",
.buttons = {
@ -875,6 +890,10 @@ static struct platform_t __init *platform_detect(void)
if (!strcmp(getvar("boardtype"), "0x0101") && !strcmp(getvar("boardrev"), "0x10")) /* SE505V2 With Modified CFE */
return &platforms[SE505V2];
if (!strcmp(boardtype, "0x048e") && !strcmp(getvar("boardrev"),"0x35") &&
!strcmp(getvar("boardflags"), "0x750")) /* D-Link DIR-320 */
return &platforms[DIR320];
} else { /* PMON based - old stuff */
if ((simple_strtoul(getvar("GemtekPmonVer"), NULL, 0) == 9) &&
(simple_strtoul(getvar("et0phyaddr"), NULL, 0) == 30)) {