brcm63xx: update development kernel to linux 3.14

Now that 3.13 will be EOL soon, switch to 3.14.

Known issues:
 * 74x164 is not available because upstream dropped non-DT support
 * jffs2 breaks with SMP

Unknown issues:
 * probably plenty

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 40380

target/linux/brcm63xx/config-3.14

@@ -4,6 +4,7 @@ CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
 CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
@@ -66,7 +67,6 @@ CONFIG_GENERIC_NET_UTILS=y
 CONFIG_GENERIC_PCI_IOMAP=y
 CONFIG_GENERIC_SMP_IDLE_THREAD=y
 CONFIG_GPIOLIB=y
-CONFIG_GPIO_74X164=y
 CONFIG_GPIO_DEVRES=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HAMRADIO is not set
@@ -78,6 +78,7 @@ CONFIG_HAVE_ARCH_JUMP_LABEL=y
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_CC_STACKPROTECTOR=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_CONTEXT_TRACKING=y
 CONFIG_HAVE_C_RECORDMCOUNT=y
@@ -118,9 +119,12 @@ CONFIG_LEDS_GPIO=y
 CONFIG_MDIO_BOARDINFO=y
 CONFIG_MIPS=y
 # CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
+CONFIG_MIPS_L1_CACHE_SHIFT=4
+CONFIG_MIPS_L1_CACHE_SHIFT_4=y
 # CONFIG_MIPS_MACHINE is not set
 CONFIG_MIPS_MT_DISABLED=y
+CONFIG_MIPS_O32_FP64_SUPPORT=y
+# CONFIG_MLX5_CORE is not set
 CONFIG_MODULES_USE_ELF_REL=y
 CONFIG_MODULE_FORCE_LOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y

target/linux/brcm63xx/patches-3.13/001-spi-add-bcm63xx-HSSPI-driver.patch

@@ -1,531 +0,0 @@
-From 8e051b79ae3f66dbad96312fe2976401c28d2148 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 12 Nov 2011 12:19:55 +0100
-Subject: [PATCH 5/5] spi: add bcm63xx HSSPI driver
-
-Add a driver for the High Speed SPI controller found on newer BCM63XX SoCs.
-
-It does feature some new modes like 3-wire or dual spi, but neither of it
-is currently implemented.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/spi/Kconfig             |   7 +
- drivers/spi/Makefile            |   1 +
- drivers/spi/spi-bcm63xx-hsspi.c | 484 ++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 492 insertions(+)
- create mode 100644 drivers/spi/spi-bcm63xx-hsspi.c
-
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -118,6 +118,13 @@ config SPI_BCM63XX
- 	help
-           Enable support for the SPI controller on the Broadcom BCM63xx SoCs.
- 
-+config SPI_BCM63XX_HSSPI
-+	tristate "Broadcom BCM63XX HS SPI controller driver"
-+	depends on BCM63XX || COMPILE_TEST
-+	help
-+	  This enables support for the High Speed SPI controller present on
-+	  newer Broadcom BCM63XX SoCs.
-+
- config SPI_BITBANG
- 	tristate "Utilities for Bitbanging SPI masters"
- 	help
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -16,6 +16,7 @@ obj-$(CONFIG_SPI_ATH79)			+= spi-ath79.o
- obj-$(CONFIG_SPI_AU1550)		+= spi-au1550.o
- obj-$(CONFIG_SPI_BCM2835)		+= spi-bcm2835.o
- obj-$(CONFIG_SPI_BCM63XX)		+= spi-bcm63xx.o
-+obj-$(CONFIG_SPI_BCM63XX_HSSPI)		+= spi-bcm63xx-hsspi.o
- obj-$(CONFIG_SPI_BFIN5XX)		+= spi-bfin5xx.o
- obj-$(CONFIG_SPI_BFIN_V3)               += spi-bfin-v3.o
- obj-$(CONFIG_SPI_BFIN_SPORT)		+= spi-bfin-sport.o
---- /dev/null
-+++ b/drivers/spi/spi-bcm63xx-hsspi.c
-@@ -0,0 +1,484 @@
-+/*
-+ * Broadcom BCM63XX High Speed SPI Controller driver
-+ *
-+ * Copyright 2000-2010 Broadcom Corporation
-+ * Copyright 2012-2013 Jonas Gorski <jogo@openwrt.org>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/io.h>
-+#include <linux/clk.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/delay.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/err.h>
-+#include <linux/interrupt.h>
-+#include <linux/spi/spi.h>
-+#include <linux/workqueue.h>
-+#include <linux/mutex.h>
-+
-+#define HSSPI_GLOBAL_CTRL_REG			0x0
-+#define GLOBAL_CTRL_CS_POLARITY_SHIFT		0
-+#define GLOBAL_CTRL_CS_POLARITY_MASK		0x000000ff
-+#define GLOBAL_CTRL_PLL_CLK_CTRL_SHIFT		8
-+#define GLOBAL_CTRL_PLL_CLK_CTRL_MASK		0x0000ff00
-+#define GLOBAL_CTRL_CLK_GATE_SSOFF		BIT(16)
-+#define GLOBAL_CTRL_CLK_POLARITY		BIT(17)
-+#define GLOBAL_CTRL_MOSI_IDLE			BIT(18)
-+
-+#define HSSPI_GLOBAL_EXT_TRIGGER_REG		0x4
-+
-+#define HSSPI_INT_STATUS_REG			0x8
-+#define HSSPI_INT_STATUS_MASKED_REG		0xc
-+#define HSSPI_INT_MASK_REG			0x10
-+
-+#define HSSPI_PINGx_CMD_DONE(i)			BIT((i * 8) + 0)
-+#define HSSPI_PINGx_RX_OVER(i)			BIT((i * 8) + 1)
-+#define HSSPI_PINGx_TX_UNDER(i)			BIT((i * 8) + 2)
-+#define HSSPI_PINGx_POLL_TIMEOUT(i)		BIT((i * 8) + 3)
-+#define HSSPI_PINGx_CTRL_INVAL(i)		BIT((i * 8) + 4)
-+
-+#define HSSPI_INT_CLEAR_ALL			0xff001f1f
-+
-+#define HSSPI_PINGPONG_COMMAND_REG(x)		(0x80 + (x) * 0x40)
-+#define PINGPONG_CMD_COMMAND_MASK		0xf
-+#define PINGPONG_COMMAND_NOOP			0
-+#define PINGPONG_COMMAND_START_NOW		1
-+#define PINGPONG_COMMAND_START_TRIGGER		2
-+#define PINGPONG_COMMAND_HALT			3
-+#define PINGPONG_COMMAND_FLUSH			4
-+#define PINGPONG_CMD_PROFILE_SHIFT		8
-+#define PINGPONG_CMD_SS_SHIFT			12
-+
-+#define HSSPI_PINGPONG_STATUS_REG(x)		(0x84 + (x) * 0x40)
-+
-+#define HSSPI_PROFILE_CLK_CTRL_REG(x)		(0x100 + (x) * 0x20)
-+#define CLK_CTRL_FREQ_CTRL_MASK			0x0000ffff
-+#define CLK_CTRL_SPI_CLK_2X_SEL			BIT(14)
-+#define CLK_CTRL_ACCUM_RST_ON_LOOP		BIT(15)
-+
-+#define HSSPI_PROFILE_SIGNAL_CTRL_REG(x)	(0x104 + (x) * 0x20)
-+#define SIGNAL_CTRL_LATCH_RISING		BIT(12)
-+#define SIGNAL_CTRL_LAUNCH_RISING		BIT(13)
-+#define SIGNAL_CTRL_ASYNC_INPUT_PATH		BIT(16)
-+
-+#define HSSPI_PROFILE_MODE_CTRL_REG(x)		(0x108 + (x) * 0x20)
-+#define MODE_CTRL_MULTIDATA_RD_STRT_SHIFT	8
-+#define MODE_CTRL_MULTIDATA_WR_STRT_SHIFT	12
-+#define MODE_CTRL_MULTIDATA_RD_SIZE_SHIFT	16
-+#define MODE_CTRL_MULTIDATA_WR_SIZE_SHIFT	18
-+#define MODE_CTRL_MODE_3WIRE			BIT(20)
-+#define MODE_CTRL_PREPENDBYTE_CNT_SHIFT		24
-+
-+#define HSSPI_FIFO_REG(x)			(0x200 + (x) * 0x200)
-+
-+
-+#define HSSPI_OP_CODE_SHIFT			13
-+#define HSSPI_OP_SLEEP				(0 << HSSPI_OP_CODE_SHIFT)
-+#define HSSPI_OP_READ_WRITE			(1 << HSSPI_OP_CODE_SHIFT)
-+#define HSSPI_OP_WRITE				(2 << HSSPI_OP_CODE_SHIFT)
-+#define HSSPI_OP_READ				(3 << HSSPI_OP_CODE_SHIFT)
-+#define HSSPI_OP_SETIRQ				(4 << HSSPI_OP_CODE_SHIFT)
-+
-+#define HSSPI_BUFFER_LEN			512
-+#define HSSPI_OPCODE_LEN			2
-+
-+#define HSSPI_MAX_PREPEND_LEN			15
-+
-+#define HSSPI_MAX_SYNC_CLOCK			30000000
-+
-+#define HSSPI_BUS_NUM				1 /* 0 is legacy SPI */
-+
-+struct bcm63xx_hsspi {
-+	struct completion done;
-+	struct mutex bus_mutex;
-+
-+	struct platform_device *pdev;
-+	struct clk *clk;
-+	void __iomem *regs;
-+	u8 __iomem *fifo;
-+
-+	u32 speed_hz;
-+	u8 cs_polarity;
-+};
-+
-+static void bcm63xx_hsspi_set_cs(struct bcm63xx_hsspi *bs, unsigned cs,
-+				 bool active)
-+{
-+	u32 reg;
-+
-+	mutex_lock(&bs->bus_mutex);
-+	reg = __raw_readl(bs->regs + HSSPI_GLOBAL_CTRL_REG);
-+
-+	reg &= ~BIT(cs);
-+	if (active == !(bs->cs_polarity & BIT(cs)))
-+		reg |= BIT(cs);
-+
-+	__raw_writel(reg, bs->regs + HSSPI_GLOBAL_CTRL_REG);
-+	mutex_unlock(&bs->bus_mutex);
-+}
-+
-+static void bcm63xx_hsspi_set_clk(struct bcm63xx_hsspi *bs,
-+				  struct spi_device *spi, int hz)
-+{
-+	unsigned profile = spi->chip_select;
-+	u32 reg;
-+
-+	reg = DIV_ROUND_UP(2048, DIV_ROUND_UP(bs->speed_hz, hz));
-+	__raw_writel(CLK_CTRL_ACCUM_RST_ON_LOOP | reg,
-+		     bs->regs + HSSPI_PROFILE_CLK_CTRL_REG(profile));
-+
-+	reg = __raw_readl(bs->regs + HSSPI_PROFILE_SIGNAL_CTRL_REG(profile));
-+	if (hz > HSSPI_MAX_SYNC_CLOCK)
-+		reg |= SIGNAL_CTRL_ASYNC_INPUT_PATH;
-+	else
-+		reg &= ~SIGNAL_CTRL_ASYNC_INPUT_PATH;
-+	__raw_writel(reg, bs->regs + HSSPI_PROFILE_SIGNAL_CTRL_REG(profile));
-+
-+	mutex_lock(&bs->bus_mutex);
-+	/* setup clock polarity */
-+	reg = __raw_readl(bs->regs + HSSPI_GLOBAL_CTRL_REG);
-+	reg &= ~GLOBAL_CTRL_CLK_POLARITY;
-+	if (spi->mode & SPI_CPOL)
-+		reg |= GLOBAL_CTRL_CLK_POLARITY;
-+	__raw_writel(reg, bs->regs + HSSPI_GLOBAL_CTRL_REG);
-+	mutex_unlock(&bs->bus_mutex);
-+}
-+
-+static int bcm63xx_hsspi_do_txrx(struct spi_device *spi, struct spi_transfer *t)
-+{
-+	struct bcm63xx_hsspi *bs = spi_master_get_devdata(spi->master);
-+	unsigned chip_select = spi->chip_select;
-+	u16 opcode = 0;
-+	int pending = t->len;
-+	int step_size = HSSPI_BUFFER_LEN;
-+	const u8 *tx = t->tx_buf;
-+	u8 *rx = t->rx_buf;
-+
-+	bcm63xx_hsspi_set_clk(bs, spi, t->speed_hz);
-+	bcm63xx_hsspi_set_cs(bs, spi->chip_select, true);
-+
-+	if (tx && rx)
-+		opcode = HSSPI_OP_READ_WRITE;
-+	else if (tx)
-+		opcode = HSSPI_OP_WRITE;
-+	else if (rx)
-+		opcode = HSSPI_OP_READ;
-+
-+	if (opcode != HSSPI_OP_READ)
-+		step_size -= HSSPI_OPCODE_LEN;
-+
-+	__raw_writel(0 << MODE_CTRL_PREPENDBYTE_CNT_SHIFT |
-+		     2 << MODE_CTRL_MULTIDATA_WR_STRT_SHIFT |
-+		     2 << MODE_CTRL_MULTIDATA_RD_STRT_SHIFT | 0xff,
-+		     bs->regs + HSSPI_PROFILE_MODE_CTRL_REG(chip_select));
-+
-+	while (pending > 0) {
-+		int curr_step = min_t(int, step_size, pending);
-+
-+		init_completion(&bs->done);
-+		if (tx) {
-+			memcpy_toio(bs->fifo + HSSPI_OPCODE_LEN, tx, curr_step);
-+			tx += curr_step;
-+		}
-+
-+		__raw_writew(opcode | curr_step, bs->fifo);
-+
-+		/* enable interrupt */
-+		__raw_writel(HSSPI_PINGx_CMD_DONE(0),
-+			     bs->regs + HSSPI_INT_MASK_REG);
-+
-+		/* start the transfer */
-+		__raw_writel(!chip_select << PINGPONG_CMD_SS_SHIFT |
-+			     chip_select << PINGPONG_CMD_PROFILE_SHIFT |
-+			     PINGPONG_COMMAND_START_NOW,
-+			     bs->regs + HSSPI_PINGPONG_COMMAND_REG(0));
-+
-+		if (wait_for_completion_timeout(&bs->done, HZ) == 0) {
-+			dev_err(&bs->pdev->dev, "transfer timed out!\n");
-+			return -ETIMEDOUT;
-+		}
-+
-+		if (rx) {
-+			memcpy_fromio(rx, bs->fifo, curr_step);
-+			rx += curr_step;
-+		}
-+
-+		pending -= curr_step;
-+	}
-+
-+	return 0;
-+}
-+
-+static int bcm63xx_hsspi_setup(struct spi_device *spi)
-+{
-+	struct bcm63xx_hsspi *bs = spi_master_get_devdata(spi->master);
-+	u32 reg;
-+
-+	reg = __raw_readl(bs->regs +
-+			  HSSPI_PROFILE_SIGNAL_CTRL_REG(spi->chip_select));
-+	reg &= ~(SIGNAL_CTRL_LAUNCH_RISING | SIGNAL_CTRL_LATCH_RISING);
-+	if (spi->mode & SPI_CPHA)
-+		reg |= SIGNAL_CTRL_LAUNCH_RISING;
-+	else
-+		reg |= SIGNAL_CTRL_LATCH_RISING;
-+	__raw_writel(reg, bs->regs +
-+		     HSSPI_PROFILE_SIGNAL_CTRL_REG(spi->chip_select));
-+
-+	mutex_lock(&bs->bus_mutex);
-+	reg = __raw_readl(bs->regs + HSSPI_GLOBAL_CTRL_REG);
-+
-+	/* only change actual polarities if there is no transfer */
-+	if ((reg & GLOBAL_CTRL_CS_POLARITY_MASK) == bs->cs_polarity) {
-+		if (spi->mode & SPI_CS_HIGH)
-+			reg |= BIT(spi->chip_select);
-+		else
-+			reg &= ~BIT(spi->chip_select);
-+		__raw_writel(reg, bs->regs + HSSPI_GLOBAL_CTRL_REG);
-+	}
-+
-+	if (spi->mode & SPI_CS_HIGH)
-+		bs->cs_polarity |= BIT(spi->chip_select);
-+	else
-+		bs->cs_polarity &= ~BIT(spi->chip_select);
-+
-+	mutex_unlock(&bs->bus_mutex);
-+
-+	return 0;
-+}
-+
-+static int bcm63xx_hsspi_transfer_one(struct spi_master *master,
-+				      struct spi_message *msg)
-+{
-+	struct bcm63xx_hsspi *bs = spi_master_get_devdata(master);
-+	struct spi_transfer *t;
-+	struct spi_device *spi = msg->spi;
-+	int status = -EINVAL;
-+	int dummy_cs;
-+	u32 reg;
-+
-+	/* This controller does not support keeping CS active during idle.
-+	 * To work around this, we use the following ugly hack:
-+	 *
-+	 * a. Invert the target chip select's polarity so it will be active.
-+	 * b. Select a "dummy" chip select to use as the hardware target.
-+	 * c. Invert the dummy chip select's polarity so it will be inactive
-+	 *    during the actual transfers.
-+	 * d. Tell the hardware to send to the dummy chip select. Thanks to
-+	 *    the multiplexed nature of SPI the actual target will receive
-+	 *    the transfer and we see its response.
-+	 *
-+	 * e. At the end restore the polarities again to their default values.
-+	 */
-+
-+	dummy_cs = !spi->chip_select;
-+	bcm63xx_hsspi_set_cs(bs, dummy_cs, true);
-+
-+	list_for_each_entry(t, &msg->transfers, transfer_list) {
-+		status = bcm63xx_hsspi_do_txrx(spi, t);
-+		if (status)
-+			break;
-+
-+		msg->actual_length += t->len;
-+
-+		if (t->delay_usecs)
-+			udelay(t->delay_usecs);
-+
-+		if (t->cs_change)
-+			bcm63xx_hsspi_set_cs(bs, spi->chip_select, false);
-+	}
-+
-+	mutex_lock(&bs->bus_mutex);
-+	reg = __raw_readl(bs->regs + HSSPI_GLOBAL_CTRL_REG);
-+	reg &= ~GLOBAL_CTRL_CS_POLARITY_MASK;
-+	reg |= bs->cs_polarity;
-+	__raw_writel(reg, bs->regs + HSSPI_GLOBAL_CTRL_REG);
-+	mutex_unlock(&bs->bus_mutex);
-+
-+	msg->status = status;
-+	spi_finalize_current_message(master);
-+
-+	return 0;
-+}
-+
-+static irqreturn_t bcm63xx_hsspi_interrupt(int irq, void *dev_id)
-+{
-+	struct bcm63xx_hsspi *bs = (struct bcm63xx_hsspi *)dev_id;
-+
-+	if (__raw_readl(bs->regs + HSSPI_INT_STATUS_MASKED_REG) == 0)
-+		return IRQ_NONE;
-+
-+	__raw_writel(HSSPI_INT_CLEAR_ALL, bs->regs + HSSPI_INT_STATUS_REG);
-+	__raw_writel(0, bs->regs + HSSPI_INT_MASK_REG);
-+
-+	complete(&bs->done);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static int bcm63xx_hsspi_probe(struct platform_device *pdev)
-+{
-+	struct spi_master *master;
-+	struct bcm63xx_hsspi *bs;
-+	struct resource *res_mem;
-+	void __iomem *regs;
-+	struct device *dev = &pdev->dev;
-+	struct clk *clk;
-+	int irq, ret;
-+	u32 reg, rate;
-+
-+	irq = platform_get_irq(pdev, 0);
-+	if (irq < 0) {
-+		dev_err(dev, "no irq\n");
-+		return -ENXIO;
-+	}
-+
-+	res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	regs = devm_request_and_ioremap(dev, res_mem);
-+	if (IS_ERR(regs))
-+		return PTR_ERR(regs);
-+
-+	clk = clk_get(dev, "hsspi");
-+
-+	if (IS_ERR(clk))
-+		return PTR_ERR(clk);
-+
-+	rate = clk_get_rate(clk);
-+	if (!rate) {
-+		ret = -EINVAL;
-+		goto out_put_clk;
-+	}
-+
-+	clk_prepare_enable(clk);
-+
-+	master = spi_alloc_master(&pdev->dev, sizeof(*bs));
-+	if (!master) {
-+		ret = -ENOMEM;
-+		goto out_disable_clk;
-+	}
-+
-+	bs = spi_master_get_devdata(master);
-+	bs->pdev = pdev;
-+	bs->clk = clk;
-+	bs->regs = regs;
-+	bs->speed_hz = rate;
-+	bs->fifo = (u8 __iomem *)(bs->regs + HSSPI_FIFO_REG(0));
-+
-+	mutex_init(&bs->bus_mutex);
-+
-+	master->bus_num = HSSPI_BUS_NUM;
-+	master->num_chipselect = 8;
-+	master->setup = bcm63xx_hsspi_setup;
-+	master->transfer_one_message = bcm63xx_hsspi_transfer_one;
-+	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
-+	master->bits_per_word_mask = SPI_BPW_MASK(8);
-+	master->auto_runtime_pm = true;
-+
-+	platform_set_drvdata(pdev, master);
-+
-+	/* Initialize the hardware */
-+	__raw_writel(0, bs->regs + HSSPI_INT_MASK_REG);
-+
-+	/* clean up any pending interrupts */
-+	__raw_writel(HSSPI_INT_CLEAR_ALL, bs->regs + HSSPI_INT_STATUS_REG);
-+
-+	/* read out default CS polarities */
-+	reg = __raw_readl(bs->regs + HSSPI_GLOBAL_CTRL_REG);
-+	bs->cs_polarity = reg & GLOBAL_CTRL_CS_POLARITY_MASK;
-+	__raw_writel(reg | GLOBAL_CTRL_CLK_GATE_SSOFF,
-+		     bs->regs + HSSPI_GLOBAL_CTRL_REG);
-+
-+	ret = devm_request_irq(dev, irq, bcm63xx_hsspi_interrupt, IRQF_SHARED,
-+			       pdev->name, bs);
-+
-+	if (ret)
-+		goto out_put_master;
-+
-+	/* register and we are done */
-+	ret = spi_register_master(master);
-+	if (ret)
-+		goto out_put_master;
-+
-+	return 0;
-+
-+out_put_master:
-+	spi_master_put(master);
-+out_disable_clk:
-+	clk_disable_unprepare(clk);
-+out_put_clk:
-+	clk_put(clk);
-+
-+	return ret;
-+}
-+
-+
-+static int bcm63xx_hsspi_remove(struct platform_device *pdev)
-+{
-+	struct spi_master *master = platform_get_drvdata(pdev);
-+	struct bcm63xx_hsspi *bs = spi_master_get_devdata(master);
-+
-+	spi_unregister_master(master);
-+
-+	/* reset the hardware and block queue progress */
-+	__raw_writel(0, bs->regs + HSSPI_INT_MASK_REG);
-+	clk_disable_unprepare(bs->clk);
-+	clk_put(bs->clk);
-+
-+	return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+static int bcm63xx_hsspi_suspend(struct device *dev)
-+{
-+	struct spi_master *master = dev_get_drvdata(dev);
-+	struct bcm63xx_hsspi *bs = spi_master_get_devdata(master);
-+
-+	spi_master_suspend(master);
-+	clk_disable(bs->clk);
-+
-+	return 0;
-+}
-+
-+static int bcm63xx_hsspi_resume(struct device *dev)
-+{
-+	struct spi_master *master = dev_get_drvdata(dev);
-+	struct bcm63xx_hsspi *bs = spi_master_get_devdata(master);
-+
-+	clk_enable(bs->clk);
-+	spi_master_resume(master);
-+
-+	return 0;
-+}
-+
-+static const struct dev_pm_ops bcm63xx_hsspi_pm_ops = {
-+	.suspend	= bcm63xx_hsspi_suspend,
-+	.resume		= bcm63xx_hsspi_resume,
-+};
-+
-+#define BCM63XX_HSSPI_PM_OPS	(&bcm63xx_hsspi_pm_ops)
-+#else
-+#define BCM63XX_HSSPI_PM_OPS	NULL
-+#endif
-+
-+
-+
-+static struct platform_driver bcm63xx_hsspi_driver = {
-+	.driver = {
-+		.name	= "bcm63xx-hsspi",
-+		.owner	= THIS_MODULE,
-+		.pm	= BCM63XX_HSSPI_PM_OPS,
-+	},
-+	.probe		= bcm63xx_hsspi_probe,
-+	.remove		= bcm63xx_hsspi_remove,
-+};
-+
-+module_platform_driver(bcm63xx_hsspi_driver);
-+
-+MODULE_ALIAS("platform:bcm63xx_hsspi");
-+MODULE_DESCRIPTION("Broadcom BCM63xx High Speed SPI Controller driver");
-+MODULE_AUTHOR("Jonas Gorski <jogo@openwrt.org>");
-+MODULE_LICENSE("GPL");

target/linux/brcm63xx/patches-3.13/002-MIPS-BCM63XX-expose-the-HSSPI-clock.patch

@@ -1,50 +0,0 @@
-From f0df10fb498c21bbb201bc81dd209ea646b5a311 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 12 Nov 2011 12:19:09 +0100
-Subject: [PATCH 1/5] MIPS: BCM63XX: expose the HSSPI clock
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/clk.c | 24 ++++++++++++++++++++++++
- 1 file changed, 24 insertions(+)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -226,6 +226,28 @@ static struct clk clk_spi = {
- };
- 
- /*
-+ * HSSPI clock
-+ */
-+static void hsspi_set(struct clk *clk, int enable)
-+{
-+	u32 mask;
-+
-+	if (BCMCPU_IS_6328())
-+		mask = CKCTL_6328_HSSPI_EN;
-+	else if (BCMCPU_IS_6362())
-+		mask = CKCTL_6362_HSSPI_EN;
-+	else
-+		return;
-+
-+	bcm_hwclock_set(mask, enable);
-+}
-+
-+static struct clk clk_hsspi = {
-+	.set	= hsspi_set,
-+};
-+
-+
-+/*
-  * XTM clock
-  */
- static void xtm_set(struct clk *clk, int enable)
-@@ -346,6 +368,8 @@ struct clk *clk_get(struct device *dev,
- 		return &clk_usbd;
- 	if (!strcmp(id, "spi"))
- 		return &clk_spi;
-+	if (!strcmp(id, "hsspi"))
-+		return &clk_hsspi;
- 	if (!strcmp(id, "xtm"))
- 		return &clk_xtm;
- 	if (!strcmp(id, "periph"))

target/linux/brcm63xx/patches-3.13/003-MIPS-BCM63XX-setup-the-HSSPI-clock-rate.patch

@@ -1,36 +0,0 @@
-From c8b7d2630d907025ce30989bddd01f4f0f13c103 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Wed, 20 Nov 2013 17:22:40 +0100
-Subject: [PATCH 2/5] MIPS: BCM63XX: setup the HSSPI clock rate
-
-Properly set up the HSSPI clock rate depending on the SoC's PLL rate.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/clk.c | 18 ++++++++++++++++++
- 1 file changed, 18 insertions(+)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -390,3 +390,21 @@ void clk_put(struct clk *clk)
- }
- 
- EXPORT_SYMBOL(clk_put);
-+
-+#define HSSPI_PLL_HZ_6328	133333333
-+#define HSSPI_PLL_HZ_6362	400000000
-+
-+static int __init bcm63xx_clk_init(void)
-+{
-+	switch (bcm63xx_get_cpu_id()) {
-+	case BCM6328_CPU_ID:
-+		clk_hsspi.rate = HSSPI_PLL_HZ_6328;
-+		break;
-+	case BCM6362_CPU_ID:
-+		clk_hsspi.rate = HSSPI_PLL_HZ_6362;
-+		break;
-+	}
-+
-+	return 0;
-+}
-+arch_initcall(bcm63xx_clk_init);

target/linux/brcm63xx/patches-3.13/004-MIPS-BCM63XX-add-HSSPI-IRQ-and-register-offsets.patch

@@ -1,156 +0,0 @@
-From 33a6acbe47636adcd9062a0e0af7985c0df9faa5 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 12 Nov 2011 12:19:55 +0100
-Subject: [PATCH 3/5] MIPS: BCM63XX: add HSSPI IRQ and register offsets
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 18 ++++++++++++++++++
- 1 file changed, 18 insertions(+)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -145,6 +145,7 @@ enum bcm63xx_regs_set {
- 	RSET_UART1,
- 	RSET_GPIO,
- 	RSET_SPI,
-+	RSET_HSSPI,
- 	RSET_UDC0,
- 	RSET_OHCI0,
- 	RSET_OHCI_PRIV,
-@@ -193,6 +194,7 @@ enum bcm63xx_regs_set {
- #define RSET_ENETDMAS_SIZE(chans)	(16 * (chans))
- #define RSET_ENETSW_SIZE		65536
- #define RSET_UART_SIZE			24
-+#define RSET_HSSPI_SIZE			1536
- #define RSET_UDC_SIZE			256
- #define RSET_OHCI_SIZE			256
- #define RSET_EHCI_SIZE			256
-@@ -265,6 +267,7 @@ enum bcm63xx_regs_set {
- #define BCM_6328_UART1_BASE		(0xb0000120)
- #define BCM_6328_GPIO_BASE		(0xb0000080)
- #define BCM_6328_SPI_BASE		(0xdeadbeef)
-+#define BCM_6328_HSSPI_BASE		(0xb0001000)
- #define BCM_6328_UDC0_BASE		(0xdeadbeef)
- #define BCM_6328_USBDMA_BASE		(0xb000c000)
- #define BCM_6328_OHCI0_BASE		(0xb0002600)
-@@ -313,6 +316,7 @@ enum bcm63xx_regs_set {
- #define BCM_6338_UART1_BASE		(0xdeadbeef)
- #define BCM_6338_GPIO_BASE		(0xfffe0400)
- #define BCM_6338_SPI_BASE		(0xfffe0c00)
-+#define BCM_6338_HSSPI_BASE		(0xdeadbeef)
- #define BCM_6338_UDC0_BASE		(0xdeadbeef)
- #define BCM_6338_USBDMA_BASE		(0xfffe2400)
- #define BCM_6338_OHCI0_BASE		(0xdeadbeef)
-@@ -360,6 +364,7 @@ enum bcm63xx_regs_set {
- #define BCM_6345_UART1_BASE		(0xdeadbeef)
- #define BCM_6345_GPIO_BASE		(0xfffe0400)
- #define BCM_6345_SPI_BASE		(0xdeadbeef)
-+#define BCM_6345_HSSPI_BASE		(0xdeadbeef)
- #define BCM_6345_UDC0_BASE		(0xdeadbeef)
- #define BCM_6345_USBDMA_BASE		(0xfffe2800)
- #define BCM_6345_ENET0_BASE		(0xfffe1800)
-@@ -406,6 +411,7 @@ enum bcm63xx_regs_set {
- #define BCM_6348_UART1_BASE		(0xdeadbeef)
- #define BCM_6348_GPIO_BASE		(0xfffe0400)
- #define BCM_6348_SPI_BASE		(0xfffe0c00)
-+#define BCM_6348_HSSPI_BASE		(0xdeadbeef)
- #define BCM_6348_UDC0_BASE		(0xfffe1000)
- #define BCM_6348_USBDMA_BASE		(0xdeadbeef)
- #define BCM_6348_OHCI0_BASE		(0xfffe1b00)
-@@ -451,6 +457,7 @@ enum bcm63xx_regs_set {
- #define BCM_6358_UART1_BASE		(0xfffe0120)
- #define BCM_6358_GPIO_BASE		(0xfffe0080)
- #define BCM_6358_SPI_BASE		(0xfffe0800)
-+#define BCM_6358_HSSPI_BASE		(0xdeadbeef)
- #define BCM_6358_UDC0_BASE		(0xfffe0800)
- #define BCM_6358_USBDMA_BASE		(0xdeadbeef)
- #define BCM_6358_OHCI0_BASE		(0xfffe1400)
-@@ -553,6 +560,7 @@ enum bcm63xx_regs_set {
- #define BCM_6368_UART1_BASE		(0xb0000120)
- #define BCM_6368_GPIO_BASE		(0xb0000080)
- #define BCM_6368_SPI_BASE		(0xb0000800)
-+#define BCM_6368_HSSPI_BASE		(0xdeadbeef)
- #define BCM_6368_UDC0_BASE		(0xdeadbeef)
- #define BCM_6368_USBDMA_BASE		(0xb0004800)
- #define BCM_6368_OHCI0_BASE		(0xb0001600)
-@@ -604,6 +612,7 @@ extern const unsigned long *bcm63xx_regs
- 	__GEN_RSET_BASE(__cpu, UART1)					\
- 	__GEN_RSET_BASE(__cpu, GPIO)					\
- 	__GEN_RSET_BASE(__cpu, SPI)					\
-+	__GEN_RSET_BASE(__cpu, HSSPI)					\
- 	__GEN_RSET_BASE(__cpu, UDC0)					\
- 	__GEN_RSET_BASE(__cpu, OHCI0)					\
- 	__GEN_RSET_BASE(__cpu, OHCI_PRIV)				\
-@@ -647,6 +656,7 @@ extern const unsigned long *bcm63xx_regs
- 	[RSET_UART1]		= BCM_## __cpu ##_UART1_BASE,		\
- 	[RSET_GPIO]		= BCM_## __cpu ##_GPIO_BASE,		\
- 	[RSET_SPI]		= BCM_## __cpu ##_SPI_BASE,		\
-+	[RSET_HSSPI]		= BCM_## __cpu ##_HSSPI_BASE,		\
- 	[RSET_UDC0]		= BCM_## __cpu ##_UDC0_BASE,		\
- 	[RSET_OHCI0]		= BCM_## __cpu ##_OHCI0_BASE,		\
- 	[RSET_OHCI_PRIV]	= BCM_## __cpu ##_OHCI_PRIV_BASE,	\
-@@ -727,6 +737,7 @@ enum bcm63xx_irq {
- 	IRQ_ENET0,
- 	IRQ_ENET1,
- 	IRQ_ENET_PHY,
-+	IRQ_HSSPI,
- 	IRQ_OHCI0,
- 	IRQ_EHCI0,
- 	IRQ_USBD,
-@@ -815,6 +826,7 @@ enum bcm63xx_irq {
- #define BCM_6328_ENET0_IRQ		0
- #define BCM_6328_ENET1_IRQ		0
- #define BCM_6328_ENET_PHY_IRQ		(IRQ_INTERNAL_BASE + 12)
-+#define BCM_6328_HSSPI_IRQ		(IRQ_INTERNAL_BASE + 29)
- #define BCM_6328_OHCI0_IRQ		(BCM_6328_HIGH_IRQ_BASE + 9)
- #define BCM_6328_EHCI0_IRQ		(BCM_6328_HIGH_IRQ_BASE + 10)
- #define BCM_6328_USBD_IRQ		(IRQ_INTERNAL_BASE + 4)
-@@ -860,6 +872,7 @@ enum bcm63xx_irq {
- #define BCM_6338_ENET0_IRQ		(IRQ_INTERNAL_BASE + 8)
- #define BCM_6338_ENET1_IRQ		0
- #define BCM_6338_ENET_PHY_IRQ		(IRQ_INTERNAL_BASE + 9)
-+#define BCM_6338_HSSPI_IRQ		0
- #define BCM_6338_OHCI0_IRQ		0
- #define BCM_6338_EHCI0_IRQ		0
- #define BCM_6338_USBD_IRQ		0
-@@ -898,6 +911,7 @@ enum bcm63xx_irq {
- #define BCM_6345_ENET0_IRQ		(IRQ_INTERNAL_BASE + 8)
- #define BCM_6345_ENET1_IRQ		0
- #define BCM_6345_ENET_PHY_IRQ		(IRQ_INTERNAL_BASE + 12)
-+#define BCM_6345_HSSPI_IRQ		0
- #define BCM_6345_OHCI0_IRQ		0
- #define BCM_6345_EHCI0_IRQ		0
- #define BCM_6345_USBD_IRQ		0
-@@ -936,6 +950,7 @@ enum bcm63xx_irq {
- #define BCM_6348_ENET0_IRQ		(IRQ_INTERNAL_BASE + 8)
- #define BCM_6348_ENET1_IRQ		(IRQ_INTERNAL_BASE + 7)
- #define BCM_6348_ENET_PHY_IRQ		(IRQ_INTERNAL_BASE + 9)
-+#define BCM_6348_HSSPI_IRQ		0
- #define BCM_6348_OHCI0_IRQ		(IRQ_INTERNAL_BASE + 12)
- #define BCM_6348_EHCI0_IRQ		0
- #define BCM_6348_USBD_IRQ		0
-@@ -974,6 +989,7 @@ enum bcm63xx_irq {
- #define BCM_6358_ENET0_IRQ		(IRQ_INTERNAL_BASE + 8)
- #define BCM_6358_ENET1_IRQ		(IRQ_INTERNAL_BASE + 6)
- #define BCM_6358_ENET_PHY_IRQ		(IRQ_INTERNAL_BASE + 9)
-+#define BCM_6358_HSSPI_IRQ		0
- #define BCM_6358_OHCI0_IRQ		(IRQ_INTERNAL_BASE + 5)
- #define BCM_6358_EHCI0_IRQ		(IRQ_INTERNAL_BASE + 10)
- #define BCM_6358_USBD_IRQ		0
-@@ -1086,6 +1102,7 @@ enum bcm63xx_irq {
- #define BCM_6368_ENET0_IRQ		0
- #define BCM_6368_ENET1_IRQ		0
- #define BCM_6368_ENET_PHY_IRQ		(IRQ_INTERNAL_BASE + 15)
-+#define BCM_6368_HSSPI_IRQ		0
- #define BCM_6368_OHCI0_IRQ		(IRQ_INTERNAL_BASE + 5)
- #define BCM_6368_EHCI0_IRQ		(IRQ_INTERNAL_BASE + 7)
- #define BCM_6368_USBD_IRQ		(IRQ_INTERNAL_BASE + 8)
-@@ -1133,6 +1150,7 @@ extern const int *bcm63xx_irqs;
- 	[IRQ_ENET0]		= BCM_## __cpu ##_ENET0_IRQ,		\
- 	[IRQ_ENET1]		= BCM_## __cpu ##_ENET1_IRQ,		\
- 	[IRQ_ENET_PHY]		= BCM_## __cpu ##_ENET_PHY_IRQ,		\
-+	[IRQ_HSSPI]		= BCM_## __cpu ##_HSSPI_IRQ,		\
- 	[IRQ_OHCI0]		= BCM_## __cpu ##_OHCI0_IRQ,		\
- 	[IRQ_EHCI0]		= BCM_## __cpu ##_EHCI0_IRQ,		\
- 	[IRQ_USBD]		= BCM_## __cpu ##_USBD_IRQ,		\

target/linux/brcm63xx/patches-3.13/005-MIPS-BCM63XX-add-HSSPI-platform-device-and-register-.patch

@@ -1,107 +0,0 @@
-From ad04c99347cf9e583457f7258e97f0be22fad2ec Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 12 Nov 2011 12:18:26 +0100
-Subject: [PATCH 4/5] MIPS: BCM63XX: add HSSPI platform device and register it
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/Makefile                         |  4 +-
- arch/mips/bcm63xx/boards/board_bcm963xx.c          |  3 ++
- arch/mips/bcm63xx/dev-hsspi.c                      | 47 ++++++++++++++++++++++
- .../include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h   |  8 ++++
- 4 files changed, 60 insertions(+), 2 deletions(-)
- create mode 100644 arch/mips/bcm63xx/dev-hsspi.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,7 +1,7 @@
- obj-y		+= clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
- 		   setup.o timer.o dev-dsp.o dev-enet.o dev-flash.o \
--		   dev-pcmcia.o dev-rng.o dev-spi.o dev-uart.o dev-wdt.o \
--		   dev-usb-usbd.o
-+		   dev-pcmcia.o dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o \
-+		   dev-wdt.o dev-usb-usbd.o
- obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
- 
- obj-y		+= boards/
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -23,6 +23,7 @@
- #include <bcm63xx_dev_enet.h>
- #include <bcm63xx_dev_dsp.h>
- #include <bcm63xx_dev_flash.h>
-+#include <bcm63xx_dev_hsspi.h>
- #include <bcm63xx_dev_pcmcia.h>
- #include <bcm63xx_dev_spi.h>
- #include <bcm63xx_dev_usb_usbd.h>
-@@ -915,6 +916,8 @@ int __init board_register_devices(void)
- 
- 	bcm63xx_spi_register();
- 
-+	bcm63xx_hsspi_register();
-+
- 	bcm63xx_flash_register();
- 
- 	bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
---- /dev/null
-+++ b/arch/mips/bcm63xx/dev-hsspi.c
-@@ -0,0 +1,47 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2012 Jonas Gorski <jonas.gorski@gmail.com>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_dev_hsspi.h>
-+#include <bcm63xx_regs.h>
-+
-+static struct resource spi_resources[] = {
-+	{
-+		.start		= -1, /* filled at runtime */
-+		.end		= -1, /* filled at runtime */
-+		.flags		= IORESOURCE_MEM,
-+	},
-+	{
-+		.start		= -1, /* filled at runtime */
-+		.flags		= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device bcm63xx_hsspi_device = {
-+	.name		= "bcm63xx-hsspi",
-+	.id		= 0,
-+	.num_resources	= ARRAY_SIZE(spi_resources),
-+	.resource	= spi_resources,
-+};
-+
-+int __init bcm63xx_hsspi_register(void)
-+{
-+	if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362())
-+		return -ENODEV;
-+
-+	spi_resources[0].start = bcm63xx_regset_address(RSET_HSSPI);
-+	spi_resources[0].end = spi_resources[0].start;
-+	spi_resources[0].end += RSET_HSSPI_SIZE - 1;
-+	spi_resources[1].start = bcm63xx_get_irq_number(IRQ_HSSPI);
-+
-+	return platform_device_register(&bcm63xx_hsspi_device);
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h
-@@ -0,0 +1,8 @@
-+#ifndef BCM63XX_DEV_HSSPI_H
-+#define BCM63XX_DEV_HSSPI_H
-+
-+#include <linux/types.h>
-+
-+int bcm63xx_hsspi_register(void);
-+
-+#endif /* BCM63XX_DEV_HSSPI_H */

target/linux/brcm63xx/patches-3.13/006-spi-bcm63xx-don-t-reject-reads-256-bytes.patch

@@ -1,31 +0,0 @@
-From 4d8fa9d3d1fe1d70fe7d59537acf49797f6010a1 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 1 Dec 2013 16:19:46 +0100
-Subject: [PATCH 2/2] spi/bcm63xx: don't reject reads >= 256 bytes
-
-The rx_tail register is only 8 bit wide, so it will wrap around
-after 256 read bytes. This makes it rather meaningless, so drop any
-usage of it to not treat reads over 256 as failed.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/spi/spi-bcm63xx.c | 8 +-------
- 1 file changed, 1 insertion(+), 7 deletions(-)
-
---- a/drivers/spi/spi-bcm63xx.c
-+++ b/drivers/spi/spi-bcm63xx.c
-@@ -205,13 +205,7 @@ static int bcm63xx_txrx_bufs(struct spi_
- 	if (!timeout)
- 		return -ETIMEDOUT;
- 
--	/* read out all data */
--	rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL);
--
--	if (do_rx && rx_tail != len)
--		return -EIO;
--
--	if (!rx_tail)
-+	if (!do_rx)
- 		return 0;
- 
- 	len = 0;

target/linux/brcm63xx/patches-3.13/007-MIPS-BCM63XX-disable-SMP-also-on-BCM3368.patch

@@ -1,36 +0,0 @@
-From 8bd8f46cbc709974b26396aa440133db4484015e Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Fri, 28 Jun 2013 00:25:13 +0200
-Subject: [PATCH V2 01/13] MIPS: BCM63XX: disable SMP also on BCM3368
-
-BCM3368 has the same shared TLB as BCM6358.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/prom.c | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/arch/mips/bcm63xx/prom.c
-+++ b/arch/mips/bcm63xx/prom.c
-@@ -64,9 +64,9 @@ void __init prom_init(void)
- 		register_smp_ops(&bmips_smp_ops);
- 
- 		/*
--		 * BCM6328 might not have its second CPU enabled, while BCM6358
--		 * needs special handling for its shared TLB, so disable SMP
--		 * for now.
-+		 * BCM6328 might not have its second CPU enabled, while BCM3368
-+		 * and BCM6358 need special handling for their shared TLB, so
-+		 * disable SMP for now.
- 		 */
- 		if (BCMCPU_IS_6328()) {
- 			reg = bcm_readl(BCM_6328_OTP_BASE +
-@@ -74,7 +74,7 @@ void __init prom_init(void)
- 
- 			if (reg & OTP_6328_REG3_TP1_DISABLED)
- 				bmips_smp_enabled = 0;
--		} else if (BCMCPU_IS_6358()) {
-+		} else if (BCMCPU_IS_3368() || BCMCPU_IS_6358()) {
- 			bmips_smp_enabled = 0;
- 		}
- 

target/linux/brcm63xx/patches-3.13/008-MIPS-allow-asm-cpu.h-to-be-included-from-assembly.patch

@@ -1,31 +0,0 @@
-From 72a1c3ad0392d7b42bf50e6ecade63a775166c73 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Thu, 27 Jun 2013 21:32:41 +0200
-Subject: [PATCH V2 02/13] MIPS: allow asm/cpu.h to be included from assembly
-
-Add guards around the enum to allow including cpu.h from assembly.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/include/asm/cpu.h | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/arch/mips/include/asm/cpu.h
-+++ b/arch/mips/include/asm/cpu.h
-@@ -249,6 +249,8 @@
- 
- #define FPIR_IMP_NONE		0x0000
- 
-+#if !defined(__ASSEMBLY__)
-+
- enum cpu_type_enum {
- 	CPU_UNKNOWN,
- 
-@@ -301,6 +303,7 @@ enum cpu_type_enum {
- 	CPU_LAST
- };
- 
-+#endif /* !__ASSEMBLY */
- 
- /*
-  * ISA Level encodings

target/linux/brcm63xx/patches-3.13/009-MIPS-BMIPS-change-compile-time-checks-to-runtime-che.patch

@@ -1,602 +0,0 @@
-From 7d790bd6cab314462a29ba194e243b8b1d529524 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Thu, 27 Jun 2013 21:33:56 +0200
-Subject: [PATCH V2 03/13] MIPS: BMIPS: change compile time checks to runtime
- checks
-
-Allow building for all bmips cpus at the same time by changing ifdefs
-to checks for the cpu type, or adding appropriate checks to the
-assembly.
-
-Since BMIPS43XX and BMIPS5000 require different IPI implementations,
-split the SMP ops into one for each, so the runtime overhead is only
-at registration time for them.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
-V1 -> V2:
-  * use switch (cpu_type()) instead of if () else if () ...
-  * split the smp ops into bmips43xx and bmips5000
-
- arch/mips/bcm63xx/prom.c      |   2 +-
- arch/mips/include/asm/bmips.h |   3 +-
- arch/mips/kernel/bmips_vec.S  |  55 ++++++--
- arch/mips/kernel/smp-bmips.c  | 312 +++++++++++++++++++++++++-----------------
- 4 files changed, 235 insertions(+), 137 deletions(-)
-
---- a/arch/mips/bcm63xx/prom.c
-+++ b/arch/mips/bcm63xx/prom.c
-@@ -61,7 +61,7 @@ void __init prom_init(void)
- 
- 	if (IS_ENABLED(CONFIG_CPU_BMIPS4350) && IS_ENABLED(CONFIG_SMP)) {
- 		/* set up SMP */
--		register_smp_ops(&bmips_smp_ops);
-+		register_smp_ops(&bmips43xx_smp_ops);
- 
- 		/*
- 		 * BCM6328 might not have its second CPU enabled, while BCM3368
---- a/arch/mips/include/asm/bmips.h
-+++ b/arch/mips/include/asm/bmips.h
-@@ -47,7 +47,8 @@
- #include <linux/cpumask.h>
- #include <asm/r4kcache.h>
- 
--extern struct plat_smp_ops bmips_smp_ops;
-+extern struct plat_smp_ops bmips43xx_smp_ops;
-+extern struct plat_smp_ops bmips5000_smp_ops;
- extern char bmips_reset_nmi_vec;
- extern char bmips_reset_nmi_vec_end;
- extern char bmips_smp_movevec;
---- a/arch/mips/kernel/bmips_vec.S
-+++ b/arch/mips/kernel/bmips_vec.S
-@@ -13,6 +13,7 @@
- #include <asm/asm.h>
- #include <asm/asmmacro.h>
- #include <asm/cacheops.h>
-+#include <asm/cpu.h>
- #include <asm/regdef.h>
- #include <asm/mipsregs.h>
- #include <asm/stackframe.h>
-@@ -91,12 +92,18 @@ NESTED(bmips_reset_nmi_vec, PT_SIZE, sp)
- 	beqz	k0, bmips_smp_entry
- 
- #if defined(CONFIG_CPU_BMIPS5000)
-+	mfc0	k0, CP0_PRID
-+	li	k1, PRID_IMP_BMIPS5000
-+	andi	k0, 0xff00
-+	bne	k0, k1, 1f
-+
- 	/* if we're not on core 0, this must be the SMP boot signal */
- 	li	k1, (3 << 25)
- 	mfc0	k0, $22
- 	and	k0, k1
- 	bnez	k0, bmips_smp_entry
--#endif
-+1:
-+#endif /* CONFIG_CPU_BMIPS5000 */
- #endif /* CONFIG_SMP */
- 
- 	/* nope, it's just a regular NMI */
-@@ -139,7 +146,12 @@ bmips_smp_entry:
- 	xori	k0, 0x04
- 	mtc0	k0, CP0_CONFIG
- 
-+	mfc0	k0, CP0_PRID
-+	andi	k0, 0xff00
- #if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380)
-+	li	k1, PRID_IMP_BMIPS43XX
-+	bne	k0, k1, 2f
-+
- 	/* initialize CPU1's local I-cache */
- 	li	k0, 0x80000000
- 	li	k1, 0x80010000
-@@ -150,14 +162,21 @@ bmips_smp_entry:
- 1:	cache	Index_Store_Tag_I, 0(k0)
- 	addiu	k0, 16
- 	bne	k0, k1, 1b
--#elif defined(CONFIG_CPU_BMIPS5000)
-+
-+	b	3f
-+2:
-+#endif /* CONFIG_CPU_BMIPS4350 || CONFIG_CPU_BMIPS4380 */
-+#if defined(CONFIG_CPU_BMIPS5000)
- 	/* set exception vector base */
-+	li	k1, PRID_IMP_BMIPS5000
-+	bne	k0, k1, 3f
-+
- 	la	k0, ebase
- 	lw	k0, 0(k0)
- 	mtc0	k0, $15, 1
- 	BARRIER
--#endif
--
-+#endif /* CONFIG_CPU_BMIPS5000 */
-+3:
- 	/* jump back to kseg0 in case we need to remap the kseg1 area */
- 	la	k0, 1f
- 	jr	k0
-@@ -221,8 +240,18 @@ END(bmips_smp_int_vec)
- LEAF(bmips_enable_xks01)
- 
- #if defined(CONFIG_XKS01)
--
-+	mfc0	t0, CP0_PRID
-+	andi	t2, t0, 0xff00
- #if defined(CONFIG_CPU_BMIPS4380)
-+	li	t1, PRID_IMP_BMIPS43XX
-+	bne	t2, t1, 1f
-+
-+	andi	t0, 0xff
-+	addiu	t1, t0, -PRID_REV_BMIPS4380_HI
-+	bgtz	t1, 2f
-+	addiu	t0, -PRID_REV_BMIPS4380_LO
-+	bltz	t0, 2f
-+
- 	mfc0	t0, $22, 3
- 	li	t1, 0x1ff0
- 	li	t2, (1 << 12) | (1 << 9)
-@@ -231,7 +260,13 @@ LEAF(bmips_enable_xks01)
- 	or	t0, t2
- 	mtc0	t0, $22, 3
- 	BARRIER
--#elif defined(CONFIG_CPU_BMIPS5000)
-+	b	2f
-+1:
-+#endif /* CONFIG_CPU_BMIPS4380 */
-+#if defined(CONFIG_CPU_BMIPS5000)
-+	li	t1, PRID_IMP_BMIPS5000
-+	bne	t2, t1, 2f
-+
- 	mfc0	t0, $22, 5
- 	li	t1, 0x01ff
- 	li	t2, (1 << 8) | (1 << 5)
-@@ -240,12 +275,8 @@ LEAF(bmips_enable_xks01)
- 	or	t0, t2
- 	mtc0	t0, $22, 5
- 	BARRIER
--#else
--
--#error Missing XKS01 setup
--
--#endif
--
-+#endif /* CONFIG_CPU_BMIPS5000 */
-+2:
- #endif /* defined(CONFIG_XKS01) */
- 
- 	jr	ra
---- a/arch/mips/kernel/smp-bmips.c
-+++ b/arch/mips/kernel/smp-bmips.c
-@@ -49,8 +49,10 @@ cpumask_t bmips_booted_mask;
- unsigned long bmips_smp_boot_sp;
- unsigned long bmips_smp_boot_gp;
- 
--static void bmips_send_ipi_single(int cpu, unsigned int action);
--static irqreturn_t bmips_ipi_interrupt(int irq, void *dev_id);
-+static void bmips43xx_send_ipi_single(int cpu, unsigned int action);
-+static void bmips5000_send_ipi_single(int cpu, unsigned int action);
-+static irqreturn_t bmips43xx_ipi_interrupt(int irq, void *dev_id);
-+static irqreturn_t bmips5000_ipi_interrupt(int irq, void *dev_id);
- 
- /* SW interrupts 0,1 are used for interprocessor signaling */
- #define IPI0_IRQ			(MIPS_CPU_IRQ_BASE + 0)
-@@ -64,49 +66,58 @@ static irqreturn_t bmips_ipi_interrupt(i
- static void __init bmips_smp_setup(void)
- {
- 	int i, cpu = 1, boot_cpu = 0;
--
--#if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380)
- 	int cpu_hw_intr;
- 
--	/* arbitration priority */
--	clear_c0_brcm_cmt_ctrl(0x30);
--
--	/* NBK and weak order flags */
--	set_c0_brcm_config_0(0x30000);
--
--	/* Find out if we are running on TP0 or TP1 */
--	boot_cpu = !!(read_c0_brcm_cmt_local() & (1 << 31));
--
--	/*
--	 * MIPS interrupts 0,1 (SW INT 0,1) cross over to the other thread
--	 * MIPS interrupt 2 (HW INT 0) is the CPU0 L1 controller output
--	 * MIPS interrupt 3 (HW INT 1) is the CPU1 L1 controller output
--	 */
--	if (boot_cpu == 0)
--		cpu_hw_intr = 0x02;
--	else
--		cpu_hw_intr = 0x1d;
--
--	change_c0_brcm_cmt_intr(0xf8018000, (cpu_hw_intr << 27) | (0x03 << 15));
--
--	/* single core, 2 threads (2 pipelines) */
--	max_cpus = 2;
--#elif defined(CONFIG_CPU_BMIPS5000)
--	/* enable raceless SW interrupts */
--	set_c0_brcm_config(0x03 << 22);
--
--	/* route HW interrupt 0 to CPU0, HW interrupt 1 to CPU1 */
--	change_c0_brcm_mode(0x1f << 27, 0x02 << 27);
--
--	/* N cores, 2 threads per core */
--	max_cpus = (((read_c0_brcm_config() >> 6) & 0x03) + 1) << 1;
-+	switch (current_cpu_type()) {
-+	case CPU_BMIPS4350:
-+	case CPU_BMIPS4380:
-+		/* arbitration priority */
-+		clear_c0_brcm_cmt_ctrl(0x30);
-+
-+		/* NBK and weak order flags */
-+		set_c0_brcm_config_0(0x30000);
-+
-+		/* Find out if we are running on TP0 or TP1 */
-+		boot_cpu = !!(read_c0_brcm_cmt_local() & (1 << 31));
-+
-+		/*
-+		 * MIPS interrupts 0,1 (SW INT 0,1) cross over to the other
-+		 * thread
-+		 * MIPS interrupt 2 (HW INT 0) is the CPU0 L1 controller output
-+		 * MIPS interrupt 3 (HW INT 1) is the CPU1 L1 controller output
-+		 */
-+		if (boot_cpu == 0)
-+			cpu_hw_intr = 0x02;
-+		else
-+			cpu_hw_intr = 0x1d;
-+
-+		change_c0_brcm_cmt_intr(0xf8018000,
-+					(cpu_hw_intr << 27) | (0x03 << 15));
-+
-+		/* single core, 2 threads (2 pipelines) */
-+		max_cpus = 2;
-+
-+		break;
-+	case CPU_BMIPS5000:
-+		/* enable raceless SW interrupts */
-+		set_c0_brcm_config(0x03 << 22);
-+
-+		/* route HW interrupt 0 to CPU0, HW interrupt 1 to CPU1 */
-+		change_c0_brcm_mode(0x1f << 27, 0x02 << 27);
-+
-+		/* N cores, 2 threads per core */
-+		max_cpus = (((read_c0_brcm_config() >> 6) & 0x03) + 1) << 1;
-+
-+		/* clear any pending SW interrupts */
-+		for (i = 0; i < max_cpus; i++) {
-+			write_c0_brcm_action(ACTION_CLR_IPI(i, 0));
-+			write_c0_brcm_action(ACTION_CLR_IPI(i, 1));
-+		}
- 
--	/* clear any pending SW interrupts */
--	for (i = 0; i < max_cpus; i++) {
--		write_c0_brcm_action(ACTION_CLR_IPI(i, 0));
--		write_c0_brcm_action(ACTION_CLR_IPI(i, 1));
-+		break;
-+	default:
-+		max_cpus = 1;
- 	}
--#endif
- 
- 	if (!bmips_smp_enabled)
- 		max_cpus = 1;
-@@ -134,6 +145,20 @@ static void __init bmips_smp_setup(void)
-  */
- static void bmips_prepare_cpus(unsigned int max_cpus)
- {
-+	irqreturn_t (*bmips_ipi_interrupt)(int irq, void *dev_id);
-+
-+	switch (current_cpu_type()) {
-+	case CPU_BMIPS4350:
-+	case CPU_BMIPS4380:
-+		bmips_ipi_interrupt = bmips43xx_ipi_interrupt;
-+		break;
-+	case CPU_BMIPS5000:
-+		bmips_ipi_interrupt = bmips5000_ipi_interrupt;
-+		break;
-+	default:
-+		return;
-+	}
-+
- 	if (request_irq(IPI0_IRQ, bmips_ipi_interrupt, IRQF_PERCPU,
- 			"smp_ipi0", NULL))
- 		panic("Can't request IPI0 interrupt");
-@@ -168,26 +193,39 @@ static void bmips_boot_secondary(int cpu
- 
- 	pr_info("SMP: Booting CPU%d...\n", cpu);
- 
--	if (cpumask_test_cpu(cpu, &bmips_booted_mask))
--		bmips_send_ipi_single(cpu, 0);
-+	if (cpumask_test_cpu(cpu, &bmips_booted_mask)) {
-+		switch (current_cpu_type()) {
-+		case CPU_BMIPS4350:
-+		case CPU_BMIPS4380:
-+			bmips43xx_send_ipi_single(cpu, 0);
-+			break;
-+		case CPU_BMIPS5000:
-+			bmips5000_send_ipi_single(cpu, 0);
-+			break;
-+		}
-+	}
- 	else {
--#if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380)
--		/* Reset slave TP1 if booting from TP0 */
--		if (cpu_logical_map(cpu) == 1)
--			set_c0_brcm_cmt_ctrl(0x01);
--#elif defined(CONFIG_CPU_BMIPS5000)
--		if (cpu & 0x01)
--			write_c0_brcm_action(ACTION_BOOT_THREAD(cpu));
--		else {
--			/*
--			 * core N thread 0 was already booted; just
--			 * pulse the NMI line
--			 */
--			bmips_write_zscm_reg(0x210, 0xc0000000);
--			udelay(10);
--			bmips_write_zscm_reg(0x210, 0x00);
-+		switch (current_cpu_type()) {
-+		case CPU_BMIPS4350:
-+		case CPU_BMIPS4380:
-+			/* Reset slave TP1 if booting from TP0 */
-+			if (cpu_logical_map(cpu) == 1)
-+				set_c0_brcm_cmt_ctrl(0x01);
-+			break;
-+		case CPU_BMIPS5000:
-+			if (cpu & 0x01)
-+				write_c0_brcm_action(ACTION_BOOT_THREAD(cpu));
-+			else {
-+				/*
-+				 * core N thread 0 was already booted; just
-+				 * pulse the NMI line
-+				 */
-+				bmips_write_zscm_reg(0x210, 0xc0000000);
-+				udelay(10);
-+				bmips_write_zscm_reg(0x210, 0x00);
-+			}
-+			break;
- 		}
--#endif
- 		cpumask_set_cpu(cpu, &bmips_booted_mask);
- 	}
- }
-@@ -199,26 +237,32 @@ static void bmips_init_secondary(void)
- {
- 	/* move NMI vector to kseg0, in case XKS01 is enabled */
- 
--#if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380)
--	void __iomem *cbr = BMIPS_GET_CBR();
-+	void __iomem *cbr;
- 	unsigned long old_vec;
- 	unsigned long relo_vector;
- 	int boot_cpu;
- 
--	boot_cpu = !!(read_c0_brcm_cmt_local() & (1 << 31));
--	relo_vector = boot_cpu ? BMIPS_RELO_VECTOR_CONTROL_0 :
--			  BMIPS_RELO_VECTOR_CONTROL_1;
--
--	old_vec = __raw_readl(cbr + relo_vector);
--	__raw_writel(old_vec & ~0x20000000, cbr + relo_vector);
--
--	clear_c0_cause(smp_processor_id() ? C_SW1 : C_SW0);
--#elif defined(CONFIG_CPU_BMIPS5000)
--	write_c0_brcm_bootvec(read_c0_brcm_bootvec() &
--		(smp_processor_id() & 0x01 ? ~0x20000000 : ~0x2000));
-+	switch (current_cpu_type()) {
-+	case CPU_BMIPS4350:
-+	case CPU_BMIPS4380:
-+		cbr = BMIPS_GET_CBR();
-+
-+		boot_cpu = !!(read_c0_brcm_cmt_local() & (1 << 31));
-+		relo_vector = boot_cpu ? BMIPS_RELO_VECTOR_CONTROL_0 :
-+				  BMIPS_RELO_VECTOR_CONTROL_1;
-+
-+		old_vec = __raw_readl(cbr + relo_vector);
-+		__raw_writel(old_vec & ~0x20000000, cbr + relo_vector);
-+
-+		clear_c0_cause(smp_processor_id() ? C_SW1 : C_SW0);
-+		break;
-+	case CPU_BMIPS5000:
-+		write_c0_brcm_bootvec(read_c0_brcm_bootvec() &
-+			(smp_processor_id() & 0x01 ? ~0x20000000 : ~0x2000));
- 
--	write_c0_brcm_action(ACTION_CLR_IPI(smp_processor_id(), 0));
--#endif
-+		write_c0_brcm_action(ACTION_CLR_IPI(smp_processor_id(), 0));
-+		break;
-+	}
- }
- 
- /*
-@@ -243,8 +287,6 @@ static void bmips_cpus_done(void)
- {
- }
- 
--#if defined(CONFIG_CPU_BMIPS5000)
--
- /*
-  * BMIPS5000 raceless IPIs
-  *
-@@ -253,12 +295,12 @@ static void bmips_cpus_done(void)
-  * IPI1 is used for SMP_CALL_FUNCTION
-  */
- 
--static void bmips_send_ipi_single(int cpu, unsigned int action)
-+static void bmips5000_send_ipi_single(int cpu, unsigned int action)
- {
- 	write_c0_brcm_action(ACTION_SET_IPI(cpu, action == SMP_CALL_FUNCTION));
- }
- 
--static irqreturn_t bmips_ipi_interrupt(int irq, void *dev_id)
-+static irqreturn_t bmips5000_ipi_interrupt(int irq, void *dev_id)
- {
- 	int action = irq - IPI0_IRQ;
- 
-@@ -272,7 +314,14 @@ static irqreturn_t bmips_ipi_interrupt(i
- 	return IRQ_HANDLED;
- }
- 
--#else
-+static void bmips5000_send_ipi_mask(const struct cpumask *mask,
-+	unsigned int action)
-+{
-+	unsigned int i;
-+
-+	for_each_cpu(i, mask)
-+		bmips5000_send_ipi_single(i, action);
-+}
- 
- /*
-  * BMIPS43xx racey IPIs
-@@ -287,7 +336,7 @@ static irqreturn_t bmips_ipi_interrupt(i
- static DEFINE_SPINLOCK(ipi_lock);
- static DEFINE_PER_CPU(int, ipi_action_mask);
- 
--static void bmips_send_ipi_single(int cpu, unsigned int action)
-+static void bmips43xx_send_ipi_single(int cpu, unsigned int action)
- {
- 	unsigned long flags;
- 
-@@ -298,7 +347,7 @@ static void bmips_send_ipi_single(int cp
- 	spin_unlock_irqrestore(&ipi_lock, flags);
- }
- 
--static irqreturn_t bmips_ipi_interrupt(int irq, void *dev_id)
-+static irqreturn_t bmips43xx_ipi_interrupt(int irq, void *dev_id)
- {
- 	unsigned long flags;
- 	int action, cpu = irq - IPI0_IRQ;
-@@ -317,15 +366,13 @@ static irqreturn_t bmips_ipi_interrupt(i
- 	return IRQ_HANDLED;
- }
- 
--#endif /* BMIPS type */
--
--static void bmips_send_ipi_mask(const struct cpumask *mask,
-+static void bmips43xx_send_ipi_mask(const struct cpumask *mask,
- 	unsigned int action)
- {
- 	unsigned int i;
- 
- 	for_each_cpu(i, mask)
--		bmips_send_ipi_single(i, action);
-+		bmips43xx_send_ipi_single(i, action);
- }
- 
- #ifdef CONFIG_HOTPLUG_CPU
-@@ -381,15 +428,30 @@ void __ref play_dead(void)
- 
- #endif /* CONFIG_HOTPLUG_CPU */
- 
--struct plat_smp_ops bmips_smp_ops = {
-+struct plat_smp_ops bmips43xx_smp_ops = {
-+	.smp_setup		= bmips_smp_setup,
-+	.prepare_cpus		= bmips_prepare_cpus,
-+	.boot_secondary		= bmips_boot_secondary,
-+	.smp_finish		= bmips_smp_finish,
-+	.init_secondary		= bmips_init_secondary,
-+	.cpus_done		= bmips_cpus_done,
-+	.send_ipi_single	= bmips43xx_send_ipi_single,
-+	.send_ipi_mask		= bmips43xx_send_ipi_mask,
-+#ifdef CONFIG_HOTPLUG_CPU
-+	.cpu_disable		= bmips_cpu_disable,
-+	.cpu_die		= bmips_cpu_die,
-+#endif
-+};
-+
-+struct plat_smp_ops bmips5000_smp_ops = {
- 	.smp_setup		= bmips_smp_setup,
- 	.prepare_cpus		= bmips_prepare_cpus,
- 	.boot_secondary		= bmips_boot_secondary,
- 	.smp_finish		= bmips_smp_finish,
- 	.init_secondary		= bmips_init_secondary,
- 	.cpus_done		= bmips_cpus_done,
--	.send_ipi_single	= bmips_send_ipi_single,
--	.send_ipi_mask		= bmips_send_ipi_mask,
-+	.send_ipi_single	= bmips5000_send_ipi_single,
-+	.send_ipi_mask		= bmips5000_send_ipi_mask,
- #ifdef CONFIG_HOTPLUG_CPU
- 	.cpu_disable		= bmips_cpu_disable,
- 	.cpu_die		= bmips_cpu_die,
-@@ -427,43 +489,47 @@ void bmips_ebase_setup(void)
- 
- 	BUG_ON(ebase != CKSEG0);
- 
--#if defined(CONFIG_CPU_BMIPS4350)
--	/*
--	 * BMIPS4350 cannot relocate the normal vectors, but it
--	 * can relocate the BEV=1 vectors.  So CPU1 starts up at
--	 * the relocated BEV=1, IV=0 general exception vector @
--	 * 0xa000_0380.
--	 *
--	 * set_uncached_handler() is used here because:
--	 *  - CPU1 will run this from uncached space
--	 *  - None of the cacheflush functions are set up yet
--	 */
--	set_uncached_handler(BMIPS_WARM_RESTART_VEC - CKSEG0,
--		&bmips_smp_int_vec, 0x80);
--	__sync();
--	return;
--#elif defined(CONFIG_CPU_BMIPS4380)
--	/*
--	 * 0x8000_0000: reset/NMI (initially in kseg1)
--	 * 0x8000_0400: normal vectors
--	 */
--	new_ebase = 0x80000400;
--	cbr = BMIPS_GET_CBR();
--	__raw_writel(0x80080800, cbr + BMIPS_RELO_VECTOR_CONTROL_0);
--	__raw_writel(0xa0080800, cbr + BMIPS_RELO_VECTOR_CONTROL_1);
--#elif defined(CONFIG_CPU_BMIPS5000)
--	/*
--	 * 0x8000_0000: reset/NMI (initially in kseg1)
--	 * 0x8000_1000: normal vectors
--	 */
--	new_ebase = 0x80001000;
--	write_c0_brcm_bootvec(0xa0088008);
--	write_c0_ebase(new_ebase);
--	if (max_cpus > 2)
--		bmips_write_zscm_reg(0xa0, 0xa008a008);
--#else
--	return;
--#endif
-+	switch (current_cpu_type()) {
-+	case CPU_BMIPS4350:
-+		/*
-+		 * BMIPS4350 cannot relocate the normal vectors, but it
-+		 * can relocate the BEV=1 vectors.  So CPU1 starts up at
-+		 * the relocated BEV=1, IV=0 general exception vector @
-+		 * 0xa000_0380.
-+		 *
-+		 * set_uncached_handler() is used here because:
-+		 *  - CPU1 will run this from uncached space
-+		 *  - None of the cacheflush functions are set up yet
-+		 */
-+		set_uncached_handler(BMIPS_WARM_RESTART_VEC - CKSEG0,
-+			&bmips_smp_int_vec, 0x80);
-+		__sync();
-+		return;
-+	case CPU_BMIPS4380:
-+		/*
-+		 * 0x8000_0000: reset/NMI (initially in kseg1)
-+		 * 0x8000_0400: normal vectors
-+		 */
-+		new_ebase = 0x80000400;
-+		cbr = BMIPS_GET_CBR();
-+		__raw_writel(0x80080800, cbr + BMIPS_RELO_VECTOR_CONTROL_0);
-+		__raw_writel(0xa0080800, cbr + BMIPS_RELO_VECTOR_CONTROL_1);
-+		break;
-+	case CPU_BMIPS5000:
-+		/*
-+		 * 0x8000_0000: reset/NMI (initially in kseg1)
-+		 * 0x8000_1000: normal vectors
-+		 */
-+		new_ebase = 0x80001000;
-+		write_c0_brcm_bootvec(0xa0088008);
-+		write_c0_ebase(new_ebase);
-+		if (max_cpus > 2)
-+			bmips_write_zscm_reg(0xa0, 0xa008a008);
-+		break;
-+	default:
-+		return;
-+	}
-+
- 	board_nmi_handler_setup = &bmips_nmi_handler_setup;
- 	ebase = new_ebase;
- }

target/linux/brcm63xx/patches-3.13/010-MIPS-BMIPS-merge-CPU-options-into-one-option.patch

@@ -1,137 +0,0 @@
-From 81d6f5e024884ce904b7bd36fec60291d751df48 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Thu, 27 Jun 2013 23:57:20 +0200
-Subject: [PATCH V2 04/13] MIPS: BMIPS: merge CPU options into one option
-
-Instead of treating each flavour as an exclusive CPU to select, make
-BMIPS the only option and let SYS_HAS_CPU_BMIPS* decide for which
-flavours to include support.
-
-Run tested on BMIPS3300 and BMIPS4350, only build tested for BMIPS4380
-and BMIPS5000.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
-V1 -> V2:
- * Let the SYS_HAS_CPU_BMIPS* symbols select SYS_HAS_CPU_BMIPS instead of
-   requiring users to select it
-
- arch/mips/Kconfig | 80 +++++++++++++++++++++++++++----------------------------
- 1 file changed, 39 insertions(+), 41 deletions(-)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -1396,41 +1396,21 @@ config CPU_CAVIUM_OCTEON
- 	  can have up to 16 Mips64v2 cores and 8 integrated gigabit ethernets.
- 	  Full details can be found at http://www.caviumnetworks.com.
- 
--config CPU_BMIPS3300
--	bool "BMIPS3300"
--	depends on SYS_HAS_CPU_BMIPS3300
--	select CPU_BMIPS
--	help
--	  Broadcom BMIPS3300 processors.
--
--config CPU_BMIPS4350
--	bool "BMIPS4350"
--	depends on SYS_HAS_CPU_BMIPS4350
--	select CPU_BMIPS
--	select SYS_SUPPORTS_SMP
--	select SYS_SUPPORTS_HOTPLUG_CPU
--	help
--	  Broadcom BMIPS4350 ("VIPER") processors.
--
--config CPU_BMIPS4380
--	bool "BMIPS4380"
--	depends on SYS_HAS_CPU_BMIPS4380
--	select CPU_BMIPS
--	select SYS_SUPPORTS_SMP
--	select SYS_SUPPORTS_HOTPLUG_CPU
--	help
--	  Broadcom BMIPS4380 processors.
--
--config CPU_BMIPS5000
--	bool "BMIPS5000"
--	depends on SYS_HAS_CPU_BMIPS5000
--	select CPU_BMIPS
--	select CPU_SUPPORTS_HIGHMEM
--	select MIPS_CPU_SCACHE
--	select SYS_SUPPORTS_SMP
--	select SYS_SUPPORTS_HOTPLUG_CPU
-+config CPU_BMIPS
-+	bool "Broadcom BMIPS"
-+	depends on SYS_HAS_CPU_BMIPS
-+	select CPU_MIPS32
-+	select CPU_BMIPS3300 if SYS_HAS_CPU_BMIPS3300
-+	select CPU_BMIPS4350 if SYS_HAS_CPU_BMIPS4350
-+	select CPU_BMIPS4380 if SYS_HAS_CPU_BMIPS4380
-+	select CPU_BMIPS5000 if SYS_HAS_CPU_BMIPS5000
-+	select CPU_SUPPORTS_32BIT_KERNEL
-+	select DMA_NONCOHERENT
-+	select IRQ_CPU
-+	select SWAP_IO_SPACE
-+	select WEAK_ORDERING
- 	help
--	  Broadcom BMIPS5000 processors.
-+	  Support for BMIPS3300/4350/4380 and BMIPS5000 processors.
- 
- config CPU_XLR
- 	bool "Netlogic XLR SoC"
-@@ -1513,14 +1493,25 @@ config CPU_LOONGSON1
- 	select CPU_SUPPORTS_32BIT_KERNEL
- 	select CPU_SUPPORTS_HIGHMEM
- 
--config CPU_BMIPS
-+config CPU_BMIPS3300
- 	bool
--	select CPU_MIPS32
--	select CPU_SUPPORTS_32BIT_KERNEL
--	select DMA_NONCOHERENT
--	select IRQ_CPU
--	select SWAP_IO_SPACE
--	select WEAK_ORDERING
-+
-+config CPU_BMIPS4350
-+	bool
-+	select SYS_SUPPORTS_SMP
-+	select SYS_SUPPORTS_HOTPLUG_CPU
-+
-+config CPU_BMIPS4380
-+	bool
-+	select SYS_SUPPORTS_SMP
-+	select SYS_SUPPORTS_HOTPLUG_CPU
-+
-+config CPU_BMIPS5000
-+	bool
-+	select CPU_SUPPORTS_HIGHMEM
-+	select MIPS_CPU_SCACHE
-+	select SYS_SUPPORTS_SMP
-+	select SYS_SUPPORTS_HOTPLUG_CPU
- 
- config SYS_HAS_CPU_LOONGSON2E
- 	bool
-@@ -1594,17 +1585,24 @@ config SYS_HAS_CPU_SB1
- config SYS_HAS_CPU_CAVIUM_OCTEON
- 	bool
- 
-+config SYS_HAS_CPU_BMIPS
-+	bool
-+
- config SYS_HAS_CPU_BMIPS3300
- 	bool
-+	select SYS_HAS_CPU_BMIPS
- 
- config SYS_HAS_CPU_BMIPS4350
- 	bool
-+	select SYS_HAS_CPU_BMIPS
- 
- config SYS_HAS_CPU_BMIPS4380
- 	bool
-+	select SYS_HAS_CPU_BMIPS
- 
- config SYS_HAS_CPU_BMIPS5000
- 	bool
-+	select SYS_HAS_CPU_BMIPS
- 
- config SYS_HAS_CPU_XLR
- 	bool

target/linux/brcm63xx/patches-3.13/011-MIPS-BMIPS-select-CPU_SUPPORTS_HIGHMEM.patch

@@ -1,30 +0,0 @@
-From 89d4a38dde99a6b141e90860fca594a9ac66336b Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 16 Jul 2013 14:02:57 +0200
-Subject: [PATCH V2 05/13] MIPS: BMIPS: select CPU_SUPPORTS_HIGHMEM
-
-All BMIPS CPUs support HIGHMEM, so it should be selected by CPU_BMIPS.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -1409,6 +1409,7 @@ config CPU_BMIPS
- 	select IRQ_CPU
- 	select SWAP_IO_SPACE
- 	select WEAK_ORDERING
-+	select CPU_SUPPORTS_HIGHMEM
- 	help
- 	  Support for BMIPS3300/4350/4380 and BMIPS5000 processors.
- 
-@@ -1508,7 +1509,6 @@ config CPU_BMIPS4380
- 
- config CPU_BMIPS5000
- 	bool
--	select CPU_SUPPORTS_HIGHMEM
- 	select MIPS_CPU_SCACHE
- 	select SYS_SUPPORTS_SMP
- 	select SYS_SUPPORTS_HOTPLUG_CPU

target/linux/brcm63xx/patches-3.13/012-MIPS-BMIPS-select-CPU_HAS_PREFETCH.patch

@@ -1,22 +0,0 @@
-From 58827e709eb7a2e0899260893a5c9c58eb0c5db1 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 16 Jul 2013 14:04:40 +0200
-Subject: [PATCH V2 06/13] MIPS: BMIPS: select CPU_HAS_PREFETCH
-
-As they are MIPS32 CPUs they do support the prefetch opcode.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/Kconfig | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -1410,6 +1410,7 @@ config CPU_BMIPS
- 	select SWAP_IO_SPACE
- 	select WEAK_ORDERING
- 	select CPU_SUPPORTS_HIGHMEM
-+	select CPU_HAS_PREFETCH
- 	help
- 	  Support for BMIPS3300/4350/4380 and BMIPS5000 processors.
- 

target/linux/brcm63xx/patches-3.13/013-MIPS-BMIPS-extend-BMIPS3300-to-include-BMIPS32.patch

@@ -1,52 +0,0 @@
-From e742d5b77ec18926293ec5d101470522f67ee159 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Thu, 15 Aug 2013 12:10:11 +0200
-Subject: [PATCH V2 07/13] MIPS: BMIPS: extend BMIPS3300 to include BMIPS32
-
-Codewise there is no difference between these two, so it does not make
-sense to treat them differently. Also chip families having one of these
-tend to have the other.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/Kconfig | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -1400,7 +1400,7 @@ config CPU_BMIPS
- 	bool "Broadcom BMIPS"
- 	depends on SYS_HAS_CPU_BMIPS
- 	select CPU_MIPS32
--	select CPU_BMIPS3300 if SYS_HAS_CPU_BMIPS3300
-+	select CPU_BMIPS32_3300 if SYS_HAS_CPU_BMIPS32_3300
- 	select CPU_BMIPS4350 if SYS_HAS_CPU_BMIPS4350
- 	select CPU_BMIPS4380 if SYS_HAS_CPU_BMIPS4380
- 	select CPU_BMIPS5000 if SYS_HAS_CPU_BMIPS5000
-@@ -1412,7 +1412,7 @@ config CPU_BMIPS
- 	select CPU_SUPPORTS_HIGHMEM
- 	select CPU_HAS_PREFETCH
- 	help
--	  Support for BMIPS3300/4350/4380 and BMIPS5000 processors.
-+	  Support for BMIPS32/3300/4350/4380 and BMIPS5000 processors.
- 
- config CPU_XLR
- 	bool "Netlogic XLR SoC"
-@@ -1495,7 +1495,7 @@ config CPU_LOONGSON1
- 	select CPU_SUPPORTS_32BIT_KERNEL
- 	select CPU_SUPPORTS_HIGHMEM
- 
--config CPU_BMIPS3300
-+config CPU_BMIPS32_3300
- 	bool
- 
- config CPU_BMIPS4350
-@@ -1589,7 +1589,7 @@ config SYS_HAS_CPU_CAVIUM_OCTEON
- config SYS_HAS_CPU_BMIPS
- 	bool
- 
--config SYS_HAS_CPU_BMIPS3300
-+config SYS_HAS_CPU_BMIPS32_3300
- 	bool
- 	select SYS_HAS_CPU_BMIPS
- 

target/linux/brcm63xx/patches-3.13/014-MIPS-BMIPS-add-a-smp-ops-registration-helper.patch

@@ -1,77 +0,0 @@
-From 0b135a3e8f344061ed0aa66e2514627dd7aa946f Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 23 Jun 2013 14:04:51 +0200
-Subject: [PATCH V2 08/13] MIPS: BMIPS: add a smp ops registration helper
-
-Add a helper similar to the generic register_XXX_smp_ops() for bmips.
-Register SMP UP ops in case of BMIPS32/3300.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
-V1 -> V2:
- * use SMP_UP (ops) in case of BMIPS32_3300
-
- arch/mips/Kconfig             |  1 +
- arch/mips/bcm63xx/prom.c      |  2 +-
- arch/mips/include/asm/bmips.h | 26 ++++++++++++++++++++++++++
- 3 files changed, 28 insertions(+), 1 deletion(-)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -1496,6 +1496,7 @@ config CPU_LOONGSON1
- 	select CPU_SUPPORTS_HIGHMEM
- 
- config CPU_BMIPS32_3300
-+	select SMP_UP if SMP
- 	bool
- 
- config CPU_BMIPS4350
---- a/arch/mips/bcm63xx/prom.c
-+++ b/arch/mips/bcm63xx/prom.c
-@@ -61,7 +61,7 @@ void __init prom_init(void)
- 
- 	if (IS_ENABLED(CONFIG_CPU_BMIPS4350) && IS_ENABLED(CONFIG_SMP)) {
- 		/* set up SMP */
--		register_smp_ops(&bmips43xx_smp_ops);
-+		register_bmips_smp_ops();
- 
- 		/*
- 		 * BCM6328 might not have its second CPU enabled, while BCM3368
---- a/arch/mips/include/asm/bmips.h
-+++ b/arch/mips/include/asm/bmips.h
-@@ -46,9 +46,35 @@
- 
- #include <linux/cpumask.h>
- #include <asm/r4kcache.h>
-+#include <asm/smp-ops.h>
- 
- extern struct plat_smp_ops bmips43xx_smp_ops;
- extern struct plat_smp_ops bmips5000_smp_ops;
-+
-+static inline int register_bmips_smp_ops(void)
-+{
-+#if IS_ENABLED(CONFIG_CPU_BMIPS) && IS_ENABLED(CONFIG_SMP)
-+	switch (current_cpu_type()) {
-+	case CPU_BMIPS32:
-+	case CPU_BMIPS3300:
-+		return register_up_smp_ops();
-+	case CPU_BMIPS4350:
-+	case CPU_BMIPS4380:
-+		register_smp_ops(&bmips43xx_smp_ops);
-+		break;
-+	case CPU_BMIPS5000:
-+		register_smp_ops(&bmips5000_smp_ops);
-+		break;
-+	default:
-+		return -ENODEV;
-+	}
-+
-+	return 0;
-+#else
-+	return -ENODEV;
-+#endif
-+}
-+
- extern char bmips_reset_nmi_vec;
- extern char bmips_reset_nmi_vec_end;
- extern char bmips_smp_movevec;

target/linux/brcm63xx/patches-3.13/015-MIPS-BCM63XX-always-register-bmips-smp-ops.patch

@@ -1,27 +0,0 @@
-From 08181bee8ee375225129d086656c567022becf41 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Fri, 28 Jun 2013 00:08:16 +0200
-Subject: [PATCH V2 09/13] MIPS: BCM63XX: always register bmips smp ops
-
-Use the return value for guarding further SMP setup.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/prom.c | 6 ++----
- 1 file changed, 2 insertions(+), 4 deletions(-)
-
---- a/arch/mips/bcm63xx/prom.c
-+++ b/arch/mips/bcm63xx/prom.c
-@@ -59,10 +59,8 @@ void __init prom_init(void)
- 	/* do low level board init */
- 	board_prom_init();
- 
--	if (IS_ENABLED(CONFIG_CPU_BMIPS4350) && IS_ENABLED(CONFIG_SMP)) {
--		/* set up SMP */
--		register_bmips_smp_ops();
--
-+	/* set up SMP */
-+	if (!register_bmips_smp_ops()) {
- 		/*
- 		 * BCM6328 might not have its second CPU enabled, while BCM3368
- 		 * and BCM6358 need special handling for their shared TLB, so

target/linux/brcm63xx/patches-3.13/016-MIPS-BCM63XX-let-the-individual-SoCs-select-the-appr.patch

@@ -1,70 +0,0 @@
-From 949b88531a779af4f6456ff43d3de2d4f74e44ee Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 23 Jun 2013 12:25:49 +0200
-Subject: [PATCH V2 10/13] MIPS: BCM63XX: let the individual SoCs select the
- appropriate CPUs
-
-Let each supported chip select the appropirate SYS_HAS_CPU_BMIPS*
-option for its embedded processor, so support will be conditionally
-included.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/Kconfig         | 1 -
- arch/mips/bcm63xx/Kconfig | 8 ++++++++
- 2 files changed, 8 insertions(+), 1 deletion(-)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -133,7 +133,6 @@ config BCM63XX
- 	select DMA_NONCOHERENT
- 	select IRQ_CPU
- 	select SYS_HAS_CPU_MIPS32_R1
--	select SYS_HAS_CPU_BMIPS4350 if !BCM63XX_CPU_6338 && !BCM63XX_CPU_6345 && !BCM63XX_CPU_6348
- 	select SYS_SUPPORTS_32BIT_KERNEL
- 	select SYS_SUPPORTS_BIG_ENDIAN
- 	select SYS_HAS_EARLY_PRINTK
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -3,33 +3,41 @@ menu "CPU support"
- 
- config BCM63XX_CPU_3368
- 	bool "support 3368 CPU"
-+	select SYS_HAS_CPU_BMIPS4350
- 	select HW_HAS_PCI
- 
- config BCM63XX_CPU_6328
- 	bool "support 6328 CPU"
-+	select SYS_HAS_CPU_BMIPS4350
- 	select HW_HAS_PCI
- 
- config BCM63XX_CPU_6338
- 	bool "support 6338 CPU"
-+	select SYS_HAS_CPU_BMIPS32_3300
- 	select HW_HAS_PCI
- 
- config BCM63XX_CPU_6345
- 	bool "support 6345 CPU"
-+	select SYS_HAS_CPU_BMIPS32_3300
- 
- config BCM63XX_CPU_6348
- 	bool "support 6348 CPU"
-+	select SYS_HAS_CPU_BMIPS32_3300
- 	select HW_HAS_PCI
- 
- config BCM63XX_CPU_6358
- 	bool "support 6358 CPU"
-+	select SYS_HAS_CPU_BMIPS4350
- 	select HW_HAS_PCI
- 
- config BCM63XX_CPU_6362
- 	bool "support 6362 CPU"
-+	select SYS_HAS_CPU_BMIPS4350
- 	select HW_HAS_PCI
- 
- config BCM63XX_CPU_6368
- 	bool "support 6368 CPU"
-+	select SYS_HAS_CPU_BMIPS4350
- 	select HW_HAS_PCI
- endmenu
- 

target/linux/brcm63xx/patches-3.13/017-MIPS-cpu-type-guard-BMIPS-variants-with-SYS_HAS_CPU_.patch

@@ -1,44 +0,0 @@
-From c515f21d7680015bc94e0c081b73aba5a3d74680 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Thu, 17 Oct 2013 13:14:48 +0200
-Subject: [PATCH V2 12/13] MIPS: cpu-type: guard BMIPS variants with
- SYS_HAS_CPU_BMIPS*
-
-BMIPS32 and  BMIPS3300 also need to be available for MIPS32R1, as
-bcm47xx might not select BMIPS.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/include/asm/cpu-type.h | 13 ++++++++++---
- 1 file changed, 10 insertions(+), 3 deletions(-)
-
---- a/arch/mips/include/asm/cpu-type.h
-+++ b/arch/mips/include/asm/cpu-type.h
-@@ -27,10 +27,7 @@ static inline int __pure __get_cpu_type(
- #ifdef CONFIG_SYS_HAS_CPU_MIPS32_R1
- 	case CPU_4KC:
- 	case CPU_ALCHEMY:
--	case CPU_BMIPS3300:
--	case CPU_BMIPS4350:
- 	case CPU_PR4450:
--	case CPU_BMIPS32:
- 	case CPU_JZRISC:
- #endif
- 
-@@ -163,6 +160,16 @@ static inline int __pure __get_cpu_type(
- 	case CPU_CAVIUM_OCTEON2:
- #endif
- 
-+#if defined(CONFIG_SYS_HAS_CPU_BMIPS32_3300) || \
-+	defined (CONFIG_SYS_HAS_CPU_MIPS32_R1)
-+	case CPU_BMIPS32:
-+	case CPU_BMIPS3300:
-+#endif
-+
-+#ifdef CONFIG_SYS_HAS_CPU_BMIPS4350
-+	case CPU_BMIPS4350:
-+#endif
-+
- #ifdef CONFIG_SYS_HAS_CPU_BMIPS4380
- 	case CPU_BMIPS4380:
- #endif

target/linux/brcm63xx/patches-3.13/018-MIPS-BCM63XX-drop-SYS_HAS_CPU_MIPS32R1.patch

@@ -1,24 +0,0 @@
-From c6c4897703d825c9efea6d9a708aaa080c8c3177 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Thu, 17 Oct 2013 13:16:08 +0200
-Subject: [PATCH V2 13/13] MIPS: BCM63XX: drop SYS_HAS_CPU_MIPS32R1
-
-All MIPS cores on BCM63XX identify as Broadcom, not MIPS, so no need
-to support non-broadcom MIPS CPUs. This also ensures that CPU_BMIPS
-is always selected.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/Kconfig | 1 -
- 1 file changed, 1 deletion(-)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -132,7 +132,6 @@ config BCM63XX
- 	select CSRC_R4K
- 	select DMA_NONCOHERENT
- 	select IRQ_CPU
--	select SYS_HAS_CPU_MIPS32_R1
- 	select SYS_SUPPORTS_32BIT_KERNEL
- 	select SYS_SUPPORTS_BIG_ENDIAN
- 	select SYS_HAS_EARLY_PRINTK

target/linux/brcm63xx/patches-3.13/205-USB-fix-bcm63xx_udc.patch

@@ -1,168 +0,0 @@
-From a864a5b3efe9dce1647172d105559a1b850cf4c9 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Tue, 14 Jan 2014 15:29:25 -0800
-Subject: [PATCH] usb: gadget: bcm63xx_udc: fix build failure on DMA channel
- code
-
-Commit 3dc6475 ("bcm63xx_enet: add support Broadcom BCM6345 Ethernet")
-changed the ENETDMA[CS] macros such that they are no longer macros, but
-actual register offset definitions. The bcm63xx_udc driver was not
-updated, and as a result, causes the following build error to pop up:
-
- CC      drivers/usb/gadget/u_ether.o
-drivers/usb/gadget/bcm63xx_udc.c: In function 'iudma_write':
-drivers/usb/gadget/bcm63xx_udc.c:642:24: error: called object '0' is not
-a function
-drivers/usb/gadget/bcm63xx_udc.c: In function 'iudma_reset_channel':
-drivers/usb/gadget/bcm63xx_udc.c:698:46: error: called object '0' is not
-a function
-drivers/usb/gadget/bcm63xx_udc.c:700:49: error: called object '0' is not
-a function
-
-Fix this by updating usb_dmac_{read,write}l and usb_dmas_{read,write}l to
-take an extra channel argument, and use the channel width
-(ENETDMA_CHAN_WIDTH) to offset the register we want to access, hence
-doing again what the macro implicitely did for us.
-
-CC: Kevin Cernekee <cernekee@gmail.com>
-CC: Jonas Gorski <jogo@openwrt.org>
-CC: stable@vger.kernel.org
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
-Felipe,
-
-This is against your branch as balbi/usb.git, and this fix should be applied to
-stable 3.11 onwards.
-
-Thanks!
-
- drivers/usb/gadget/bcm63xx_udc.c | 58 ++++++++++++++++++++++------------------
- 1 file changed, 32 insertions(+), 26 deletions(-)
-
---- a/drivers/usb/gadget/bcm63xx_udc.c
-+++ b/drivers/usb/gadget/bcm63xx_udc.c
-@@ -362,24 +362,30 @@ static inline void usb_dma_writel(struct
- 	bcm_writel(val, udc->iudma_regs + off);
- }
- 
--static inline u32 usb_dmac_readl(struct bcm63xx_udc *udc, u32 off)
-+static inline u32 usb_dmac_readl(struct bcm63xx_udc *udc, u32 off, int chan)
- {
--	return bcm_readl(udc->iudma_regs + IUDMA_DMAC_OFFSET + off);
-+	return bcm_readl(udc->iudma_regs + IUDMA_DMAC_OFFSET + off +
-+			(ENETDMA_CHAN_WIDTH * chan));
- }
- 
--static inline void usb_dmac_writel(struct bcm63xx_udc *udc, u32 val, u32 off)
-+static inline void usb_dmac_writel(struct bcm63xx_udc *udc, u32 val, u32 off,
-+					int chan)
- {
--	bcm_writel(val, udc->iudma_regs + IUDMA_DMAC_OFFSET + off);
-+	bcm_writel(val, udc->iudma_regs + IUDMA_DMAC_OFFSET + off +
-+			(ENETDMA_CHAN_WIDTH * chan));
- }
- 
--static inline u32 usb_dmas_readl(struct bcm63xx_udc *udc, u32 off)
-+static inline u32 usb_dmas_readl(struct bcm63xx_udc *udc, u32 off, int chan)
- {
--	return bcm_readl(udc->iudma_regs + IUDMA_DMAS_OFFSET + off);
-+	return bcm_readl(udc->iudma_regs + IUDMA_DMAS_OFFSET + off +
-+			(ENETDMA_CHAN_WIDTH * chan));
- }
- 
--static inline void usb_dmas_writel(struct bcm63xx_udc *udc, u32 val, u32 off)
-+static inline void usb_dmas_writel(struct bcm63xx_udc *udc, u32 val, u32 off,
-+					int chan)
- {
--	bcm_writel(val, udc->iudma_regs + IUDMA_DMAS_OFFSET + off);
-+	bcm_writel(val, udc->iudma_regs + IUDMA_DMAS_OFFSET + off +
-+			(ENETDMA_CHAN_WIDTH * chan));
- }
- 
- static inline void set_clocks(struct bcm63xx_udc *udc, bool is_enabled)
-@@ -639,7 +645,7 @@ static void iudma_write(struct bcm63xx_u
- 	} while (!last_bd);
- 
- 	usb_dmac_writel(udc, ENETDMAC_CHANCFG_EN_MASK,
--			ENETDMAC_CHANCFG_REG(iudma->ch_idx));
-+			ENETDMAC_CHANCFG_REG, iudma->ch_idx);
- }
- 
- /**
-@@ -695,9 +701,9 @@ static void iudma_reset_channel(struct b
- 		bcm63xx_fifo_reset_ep(udc, max(0, iudma->ep_num));
- 
- 	/* stop DMA, then wait for the hardware to wrap up */
--	usb_dmac_writel(udc, 0, ENETDMAC_CHANCFG_REG(ch_idx));
-+	usb_dmac_writel(udc, 0, ENETDMAC_CHANCFG_REG, ch_idx);
- 
--	while (usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG(ch_idx)) &
-+	while (usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG, ch_idx) &
- 				   ENETDMAC_CHANCFG_EN_MASK) {
- 		udelay(1);
- 
-@@ -714,10 +720,10 @@ static void iudma_reset_channel(struct b
- 			dev_warn(udc->dev, "forcibly halting IUDMA channel %d\n",
- 				 ch_idx);
- 			usb_dmac_writel(udc, ENETDMAC_CHANCFG_BUFHALT_MASK,
--					ENETDMAC_CHANCFG_REG(ch_idx));
-+					ENETDMAC_CHANCFG_REG, ch_idx);
- 		}
- 	}
--	usb_dmac_writel(udc, ~0, ENETDMAC_IR_REG(ch_idx));
-+	usb_dmac_writel(udc, ~0, ENETDMAC_IR_REG, ch_idx);
- 
- 	/* don't leave "live" HW-owned entries for the next guy to step on */
- 	for (d = iudma->bd_ring; d <= iudma->end_bd; d++)
-@@ -729,11 +735,11 @@ static void iudma_reset_channel(struct b
- 
- 	/* set up IRQs, UBUS burst size, and BD base for this channel */
- 	usb_dmac_writel(udc, ENETDMAC_IR_BUFDONE_MASK,
--			ENETDMAC_IRMASK_REG(ch_idx));
--	usb_dmac_writel(udc, 8, ENETDMAC_MAXBURST_REG(ch_idx));
-+			ENETDMAC_IRMASK_REG, ch_idx);
-+	usb_dmac_writel(udc, 8, ENETDMAC_MAXBURST_REG, ch_idx);
- 
--	usb_dmas_writel(udc, iudma->bd_ring_dma, ENETDMAS_RSTART_REG(ch_idx));
--	usb_dmas_writel(udc, 0, ENETDMAS_SRAM2_REG(ch_idx));
-+	usb_dmas_writel(udc, iudma->bd_ring_dma, ENETDMAS_RSTART_REG, ch_idx);
-+	usb_dmas_writel(udc, 0, ENETDMAS_SRAM2_REG, ch_idx);
- }
- 
- /**
-@@ -2016,7 +2022,7 @@ static irqreturn_t bcm63xx_udc_data_isr(
- 	spin_lock(&udc->lock);
- 
- 	usb_dmac_writel(udc, ENETDMAC_IR_BUFDONE_MASK,
--			ENETDMAC_IR_REG(iudma->ch_idx));
-+			ENETDMAC_IR_REG, iudma->ch_idx);
- 	bep = iudma->bep;
- 	rc = iudma_read(udc, iudma);
- 
-@@ -2156,18 +2162,18 @@ static int bcm63xx_iudma_dbg_show(struct
- 		seq_printf(s, " [ep%d]:\n",
- 			   max_t(int, iudma_defaults[ch_idx].ep_num, 0));
- 		seq_printf(s, "  cfg: %08x; irqstat: %08x; irqmask: %08x; maxburst: %08x\n",
--			   usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG(ch_idx)),
--			   usb_dmac_readl(udc, ENETDMAC_IR_REG(ch_idx)),
--			   usb_dmac_readl(udc, ENETDMAC_IRMASK_REG(ch_idx)),
--			   usb_dmac_readl(udc, ENETDMAC_MAXBURST_REG(ch_idx)));
-+			   usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG, ch_idx),
-+			   usb_dmac_readl(udc, ENETDMAC_IR_REG, ch_idx),
-+			   usb_dmac_readl(udc, ENETDMAC_IRMASK_REG, ch_idx),
-+			   usb_dmac_readl(udc, ENETDMAC_MAXBURST_REG, ch_idx));
- 
--		sram2 = usb_dmas_readl(udc, ENETDMAS_SRAM2_REG(ch_idx));
--		sram3 = usb_dmas_readl(udc, ENETDMAS_SRAM3_REG(ch_idx));
-+		sram2 = usb_dmas_readl(udc, ENETDMAS_SRAM2_REG, ch_idx);
-+		sram3 = usb_dmas_readl(udc, ENETDMAS_SRAM3_REG, ch_idx);
- 		seq_printf(s, "  base: %08x; index: %04x_%04x; desc: %04x_%04x %08x\n",
--			   usb_dmas_readl(udc, ENETDMAS_RSTART_REG(ch_idx)),
-+			   usb_dmas_readl(udc, ENETDMAS_RSTART_REG, ch_idx),
- 			   sram2 >> 16, sram2 & 0xffff,
- 			   sram3 >> 16, sram3 & 0xffff,
--			   usb_dmas_readl(udc, ENETDMAS_SRAM4_REG(ch_idx)));
-+			   usb_dmas_readl(udc, ENETDMAS_SRAM4_REG, ch_idx));
- 		seq_printf(s, "  desc: %d/%d used", iudma->n_bds_used,
- 			   iudma->n_bds);
- 

target/linux/brcm63xx/patches-3.14/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch

@@ -31,7 +31,7 @@ Signed-off-by: Florian Fainelli <florian@openwrt.org>
  static struct clk clk_usbd = {
 --- a/drivers/usb/gadget/bcm63xx_udc.c
 +++ b/drivers/usb/gadget/bcm63xx_udc.c
-@@ -386,7 +386,6 @@ static inline void set_clocks(struct bcm
+@@ -391,7 +391,6 @@ static inline void set_clocks(struct bcm
  	if (is_enabled) {
  		clk_enable(udc->usbh_clk);
  		clk_enable(udc->usbd_clk);

target/linux/brcm63xx/patches-3.14/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch

@@ -100,7 +100,7 @@ Signed-off-by: Florian Fainelli <florian@openwrt.org>
 +#endif /* BCM63XX_USB_PRIV_H_ */
 --- a/drivers/usb/gadget/bcm63xx_udc.c
 +++ b/drivers/usb/gadget/bcm63xx_udc.c
-@@ -41,6 +41,7 @@
+@@ -40,6 +40,7 @@
  #include <bcm63xx_dev_usb_usbd.h>
  #include <bcm63xx_io.h>
  #include <bcm63xx_regs.h>
@@ -108,7 +108,7 @@ Signed-off-by: Florian Fainelli <florian@openwrt.org>
  
  #define DRV_MODULE_NAME		"bcm63xx_udc"
  
-@@ -863,22 +864,7 @@ static void bcm63xx_select_phy_mode(stru
+@@ -868,22 +869,7 @@ static void bcm63xx_select_phy_mode(stru
  		bcm_gpio_writel(val, GPIO_PINMUX_OTHR_REG);
  	}
  
@@ -132,7 +132,7 @@ Signed-off-by: Florian Fainelli <florian@openwrt.org>
  }
  
  /**
-@@ -892,14 +878,9 @@ static void bcm63xx_select_phy_mode(stru
+@@ -897,14 +883,9 @@ static void bcm63xx_select_phy_mode(stru
   */
  static void bcm63xx_select_pullup(struct bcm63xx_udc *udc, bool is_on)
  {

target/linux/brcm63xx/patches-3.14/202-MTD-DEVICES-m25p80-use-parsers-if-provided-in-flash-.patch

@@ -11,7 +11,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
 
 --- a/drivers/mtd/devices/m25p80.c
 +++ b/drivers/mtd/devices/m25p80.c
-@@ -1124,7 +1124,8 @@ static int m25p_probe(struct spi_device
+@@ -1313,7 +1313,8 @@ static int m25p_probe(struct spi_device
  	/* partitions should match sector boundaries; and it may be good to
  	 * use readonly partitions for writeprotected sectors (BP2..BP0).
  	 */

target/linux/brcm63xx/patches-3.14/203-MTD-DEVICES-m25p80-add-support-for-limiting-reads.patch

@@ -11,15 +11,15 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
 
 --- a/drivers/mtd/devices/m25p80.c
 +++ b/drivers/mtd/devices/m25p80.c
-@@ -101,6 +101,7 @@ struct m25p {
+@@ -115,6 +115,7 @@ struct m25p {
  	u8			program_opcode;
  	u8			*command;
- 	bool			fast_read;
+ 	enum read_type		flash_read;
 +	int			max_transfer_len;
  };
  
  static inline struct m25p *mtd_to_m25p(struct mtd_info *mtd)
-@@ -359,10 +360,9 @@ static int m25p80_erase(struct mtd_info
+@@ -509,10 +510,9 @@ static inline unsigned int m25p80_rx_nbi
   * Read an address range from the flash chip.  The address range
   * may be any size provided it is within the physical boundaries.
   */
@@ -31,7 +31,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
  	struct spi_transfer t[2];
  	struct spi_message m;
  	uint8_t opcode;
-@@ -405,6 +405,28 @@ static int m25p80_read(struct mtd_info *
+@@ -562,6 +562,28 @@ static int m25p80_read(struct mtd_info *
  	return 0;
  }
  
@@ -60,7 +60,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
  /*
   * Write an address range to the flash chip.  Data must be written in
   * FLASH_PAGESIZE chunks.  The address range may be any size provided
-@@ -1001,6 +1023,9 @@ static int m25p_probe(struct spi_device
+@@ -1158,6 +1180,9 @@ static int m25p_probe(struct spi_device
  	if (!flash->command)
  		return -ENOMEM;
  

target/linux/brcm63xx/patches-3.14/204-USB-OHCI-allow-other-arches-to-use-the-BE-frame-numb.patch

@@ -20,7 +20,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
 
 --- a/drivers/usb/host/ohci.h
 +++ b/drivers/usb/host/ohci.h
-@@ -650,7 +650,7 @@ static inline u32 hc32_to_cpup (const st
+@@ -639,7 +639,7 @@ static inline u32 hc32_to_cpup (const st
   * some big-endian SOC implementations.  Same thing happens with PSW access.
   */
  

target/linux/brcm63xx/patches-3.14/206-USB-EHCI-allow-limiting-ports-for-ehci-platform.patch

@@ -21,7 +21,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
 
 --- a/drivers/usb/host/ehci-hcd.c
 +++ b/drivers/usb/host/ehci-hcd.c
-@@ -661,6 +661,10 @@ int ehci_setup(struct usb_hcd *hcd)
+@@ -660,6 +660,10 @@ int ehci_setup(struct usb_hcd *hcd)
  
  	/* cache this readonly data; minimize chip reads */
  	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);

target/linux/brcm63xx/patches-3.14/330-MIPS-BCM63XX-add-a-new-cpu-variant-helper.patch

@@ -33,7 +33,7 @@ Subject: [PATCH 40/53] MIPS: BCM63XX: add a new cpu variant helper
  u8 bcm63xx_get_cpu_rev(void)
  {
  	return bcm63xx_cpu_rev;
-@@ -332,6 +341,7 @@ void __init bcm63xx_cpu_init(void)
+@@ -334,6 +343,7 @@ void __init bcm63xx_cpu_init(void)
  	/* read out CPU type */
  	tmp = bcm_readl(chipid_reg);
  	bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;

target/linux/brcm63xx/patches-3.14/332-MIPS-BCM63XX-detect-bcm6328-variants.patch

@@ -10,7 +10,7 @@ Subject: [PATCH 42/53] MIPS: BCM63XX: detect bcm6328 variants
 
 --- a/arch/mips/bcm63xx/cpu.c
 +++ b/arch/mips/bcm63xx/cpu.c
-@@ -304,6 +304,7 @@ void __init bcm63xx_cpu_init(void)
+@@ -306,6 +306,7 @@ void __init bcm63xx_cpu_init(void)
  	struct cpuinfo_mips *c = &current_cpu_data;
  	unsigned int cpu = smp_processor_id();
  	u32 chipid_reg;
@@ -18,7 +18,7 @@ Subject: [PATCH 42/53] MIPS: BCM63XX: detect bcm6328 variants
  
  	/* soc registers location depends on cpu type */
  	chipid_reg = 0;
-@@ -343,6 +344,7 @@ void __init bcm63xx_cpu_init(void)
+@@ -345,6 +346,7 @@ void __init bcm63xx_cpu_init(void)
  	bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
  	bcm63xx_cpu_variant = bcm63xx_cpu_id;
  	bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT;
@@ -26,7 +26,7 @@ Subject: [PATCH 42/53] MIPS: BCM63XX: detect bcm6328 variants
  
  	switch (bcm63xx_cpu_id) {
  	case BCM3368_CPU_ID:
-@@ -352,6 +354,14 @@ void __init bcm63xx_cpu_init(void)
+@@ -354,6 +356,14 @@ void __init bcm63xx_cpu_init(void)
  	case BCM6328_CPU_ID:
  		bcm63xx_regs_base = bcm6328_regs_base;
  		bcm63xx_irqs = bcm6328_irqs;

target/linux/brcm63xx/patches-3.14/333-MIPS-BCM63XX-detect-BCM6362-variants.patch

@@ -10,7 +10,7 @@ Subject: [PATCH 43/53] MIPS: BCM63XX: detect BCM6362 variants
 
 --- a/arch/mips/bcm63xx/cpu.c
 +++ b/arch/mips/bcm63xx/cpu.c
-@@ -382,6 +382,14 @@ void __init bcm63xx_cpu_init(void)
+@@ -384,6 +384,14 @@ void __init bcm63xx_cpu_init(void)
  	case BCM6362_CPU_ID:
  		bcm63xx_regs_base = bcm6362_regs_base;
  		bcm63xx_irqs = bcm6362_irqs;

target/linux/brcm63xx/patches-3.14/334-MIPS-BCM63XX-add-support-for-BCM6368-variants.patch

@@ -10,7 +10,7 @@ Subject: [PATCH 44/53] MIPS: BCM63XX: add support for BCM6368 variants
 
 --- a/arch/mips/bcm63xx/cpu.c
 +++ b/arch/mips/bcm63xx/cpu.c
-@@ -392,8 +392,12 @@ void __init bcm63xx_cpu_init(void)
+@@ -394,8 +394,12 @@ void __init bcm63xx_cpu_init(void)
  
  		break;
  	case BCM6368_CPU_ID:

target/linux/brcm63xx/patches-3.14/337-MIPS-BCM63XX-widen-cpuid-field.patch

@@ -19,6 +19,15 @@ Subject: [PATCH 47/53] MIPS: BCM63XX: widen cpuid field
  EXPORT_SYMBOL(bcm63xx_cpu_id);
  
  static u32 bcm63xx_cpu_variant __read_mostly;
+@@ -127,7 +127,7 @@ unsigned int bcm63xx_get_memory_size(voi
+ 
+ static unsigned int detect_cpu_clock(void)
+ {
+-	u16 cpu_id = bcm63xx_get_cpu_id();
++	u32 cpu_id = bcm63xx_get_cpu_id();
+ 
+ 	switch (cpu_id) {
+ 	case BCM3368_CPU_ID:
 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
 +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
 @@ -27,7 +27,7 @@ u32 bcm63xx_get_cpu_variant(void);

target/linux/brcm63xx/patches-3.14/339-MIPS-BCM63XX-add-support-for-BCM63268.patch

@@ -147,7 +147,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
  u32 bcm63xx_get_cpu_variant(void)
  {
  	return bcm63xx_cpu_variant;
-@@ -251,6 +260,27 @@ static unsigned int detect_cpu_clock(voi
+@@ -253,6 +262,27 @@ static unsigned int detect_cpu_clock(voi
  
  		return (((64 * 1000000) / p1) * p2 * ndiv) / m1;
  	}
@@ -174,8 +174,8 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
 +	}
  
  	default:
- 		BUG();
-@@ -265,7 +295,7 @@ static unsigned int detect_memory_size(v
+ 		panic("Failed to detect clock for CPU with id=%04X\n", cpu_id);
+@@ -267,7 +297,7 @@ static unsigned int detect_memory_size(v
  	unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0;
  	u32 val;
  
@@ -184,7 +184,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
  		return bcm_ddr_readl(DDR_CSEND_REG) << 24;
  
  	if (BCMCPU_IS_6345()) {
-@@ -304,6 +334,7 @@ void __init bcm63xx_cpu_init(void)
+@@ -306,6 +336,7 @@ void __init bcm63xx_cpu_init(void)
  	struct cpuinfo_mips *c = &current_cpu_data;
  	unsigned int cpu = smp_processor_id();
  	u32 chipid_reg;
@@ -192,7 +192,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
  	u8 __maybe_unused varid = 0;
  
  	/* soc registers location depends on cpu type */
-@@ -325,6 +356,9 @@ void __init bcm63xx_cpu_init(void)
+@@ -327,6 +358,9 @@ void __init bcm63xx_cpu_init(void)
  		case 0x10:
  			chipid_reg = BCM_6345_PERF_BASE;
  			break;
@@ -202,7 +202,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
  		default:
  			chipid_reg = BCM_6368_PERF_BASE;
  			break;
-@@ -332,6 +366,7 @@ void __init bcm63xx_cpu_init(void)
+@@ -334,6 +368,7 @@ void __init bcm63xx_cpu_init(void)
  		break;
  	}
  
@@ -210,7 +210,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
  	/*
  	 * really early to panic, but delaying panic would not help since we
  	 * will never get any working console
-@@ -341,10 +376,17 @@ void __init bcm63xx_cpu_init(void)
+@@ -343,10 +378,17 @@ void __init bcm63xx_cpu_init(void)
  
  	/* read out CPU type */
  	tmp = bcm_readl(chipid_reg);
@@ -231,7 +231,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
  
  	switch (bcm63xx_cpu_id) {
  	case BCM3368_CPU_ID:
-@@ -399,6 +441,15 @@ void __init bcm63xx_cpu_init(void)
+@@ -401,6 +443,15 @@ void __init bcm63xx_cpu_init(void)
  		/* BCM6369 is a BCM6368 without xDSL, so treat it the same */
  		bcm63xx_cpu_id = BCM6368_CPU_ID;
  		break;
@@ -687,7 +687,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
  /* MIPS PLL control register */
  #define PERF_MIPSPLLCTL_REG		0x34
  #define MIPSPLLCTL_N1_SHIFT		20
-@@ -1499,6 +1571,13 @@
+@@ -1379,6 +1451,13 @@
  #define STRAPBUS_6362_BOOT_SEL_SERIAL	(1 << 15)
  #define STRAPBUS_6362_BOOT_SEL_NAND	(0 << 15)
  

target/linux/brcm63xx/patches-3.14/341-MIPS-BCM63XX-add-support-for-BCM6318.patch

@@ -91,7 +91,7 @@ Subject: [PATCH 51/53] MIPS: BCM63XX: add support for BCM6318
  static const unsigned long bcm6328_regs_base[] = {
  	__GEN_CPU_REGS_TABLE(6328)
  };
-@@ -134,12 +142,38 @@ unsigned int bcm63xx_get_memory_size(voi
+@@ -134,6 +142,10 @@ unsigned int bcm63xx_get_memory_size(voi
  	return bcm63xx_memory_size;
  }
  
@@ -101,7 +101,8 @@ Subject: [PATCH 51/53] MIPS: BCM63XX: add support for BCM6318
 +
  static unsigned int detect_cpu_clock(void)
  {
- 	switch (bcm63xx_get_cpu_id()) {
+ 	u32 cpu_id = bcm63xx_get_cpu_id();
+@@ -142,6 +154,28 @@ static unsigned int detect_cpu_clock(voi
  	case BCM3368_CPU_ID:
  		return 300000000;
  
@@ -130,7 +131,7 @@ Subject: [PATCH 51/53] MIPS: BCM63XX: add support for BCM6318
  	case BCM6328_CPU_ID:
  	{
  		unsigned int tmp, mips_pll_fcvo;
-@@ -295,6 +329,13 @@ static unsigned int detect_memory_size(v
+@@ -297,6 +331,13 @@ static unsigned int detect_memory_size(v
  	unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0;
  	u32 val;
  
@@ -144,7 +145,7 @@ Subject: [PATCH 51/53] MIPS: BCM63XX: add support for BCM6318
  	if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268())
  		return bcm_ddr_readl(DDR_CSEND_REG) << 24;
  
-@@ -342,6 +383,12 @@ void __init bcm63xx_cpu_init(void)
+@@ -344,6 +385,12 @@ void __init bcm63xx_cpu_init(void)
  
  	switch (c->cputype) {
  	case CPU_BMIPS3300:
@@ -157,7 +158,7 @@ Subject: [PATCH 51/53] MIPS: BCM63XX: add support for BCM6318
  		if ((read_c0_prid() & PRID_IMP_MASK) != PRID_IMP_BMIPS3300_ALT)
  			__cpu_name[cpu] = "Broadcom BCM6338";
  		/* fall-through */
-@@ -389,6 +436,10 @@ void __init bcm63xx_cpu_init(void)
+@@ -391,6 +438,10 @@ void __init bcm63xx_cpu_init(void)
  	bcm63xx_cpu_variant = bcm63xx_cpu_id;
  
  	switch (bcm63xx_cpu_id) {
@@ -571,7 +572,7 @@ Subject: [PATCH 51/53] MIPS: BCM63XX: add support for BCM6318
  #define TIMER_CTL0_REG			0x4
  #define TIMER_CTL1_REG			0x8
  #define TIMER_CTL2_REG			0xC
-@@ -1372,6 +1444,8 @@
+@@ -1252,6 +1324,8 @@
  #define SDRAM_CFG_32B_MASK		(1 << SDRAM_CFG_32B_SHIFT)
  #define SDRAM_CFG_BANK_SHIFT		13
  #define SDRAM_CFG_BANK_MASK		(1 << SDRAM_CFG_BANK_SHIFT)

target/linux/brcm63xx/patches-3.14/343-MIPS-BCM63XX-add-PCIe-support-for-BCM6318.patch

@@ -79,7 +79,7 @@ Subject: [PATCH 53/53] MIPS: BCM63XX: add PCIe support for BCM6318
  #define BCM_PCIE_MEM_END_PA_6328	(BCM_PCIE_MEM_BASE_PA_6328 +	\
 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
 +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -1662,6 +1662,17 @@
+@@ -1542,6 +1542,17 @@
   * _REG relative to RSET_PCIE
   *************************************************************************/
  
@@ -97,7 +97,7 @@ Subject: [PATCH 53/53] MIPS: BCM63XX: add PCIe support for BCM6318
  #define PCIE_CONFIG2_REG		0x408
  #define CONFIG2_BAR1_SIZE_EN		1
  #define CONFIG2_BAR1_SIZE_MASK		0xf
-@@ -1707,7 +1718,54 @@
+@@ -1587,7 +1598,54 @@
  #define PCIE_RC_INT_C			(1 << 2)
  #define PCIE_RC_INT_D			(1 << 3)
  
@@ -155,7 +155,7 @@ Subject: [PATCH 53/53] MIPS: BCM63XX: add PCIe support for BCM6318
   * _REG relative to RSET_OTP
 --- a/arch/mips/pci/ops-bcm63xx.c
 +++ b/arch/mips/pci/ops-bcm63xx.c
-@@ -489,8 +489,12 @@ static int bcm63xx_pcie_read(struct pci_
+@@ -488,8 +488,12 @@ static int bcm63xx_pcie_read(struct pci_
  	if (!bcm63xx_pcie_can_access(bus, devfn))
  		return PCIBIOS_DEVICE_NOT_FOUND;
  
@@ -170,7 +170,7 @@ Subject: [PATCH 53/53] MIPS: BCM63XX: add PCIe support for BCM6318
  
  	data = bcm_pcie_readl(reg);
  
-@@ -509,8 +513,12 @@ static int bcm63xx_pcie_write(struct pci
+@@ -508,8 +512,12 @@ static int bcm63xx_pcie_write(struct pci
  	if (!bcm63xx_pcie_can_access(bus, devfn))
  		return PCIBIOS_DEVICE_NOT_FOUND;
  

target/linux/brcm63xx/patches-3.14/347-MIPS-BCM6318-USB-support.patch

@@ -58,7 +58,7 @@
  	spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
 +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -800,6 +800,12 @@
+@@ -680,6 +680,12 @@
  #define GPIO_MODE_6368_SPI_SSN4		(1 << 30)
  #define GPIO_MODE_6368_SPI_SSN5		(1 << 31)
  
@@ -71,7 +71,7 @@
  
  #define GPIO_PINMUX_OTHR_REG		0x24
  #define GPIO_PINMUX_OTHR_6328_USB_SHIFT 12
-@@ -1118,6 +1124,7 @@
+@@ -998,6 +1004,7 @@
  
  #define USBH_PRIV_SWAP_6358_REG		0x0
  #define USBH_PRIV_SWAP_6368_REG		0x1c
@@ -79,7 +79,7 @@
  
  #define USBH_PRIV_SWAP_USBD_SHIFT	6
  #define USBH_PRIV_SWAP_USBD_MASK	(1 << USBH_PRIV_SWAP_USBD_SHIFT)
-@@ -1143,6 +1150,13 @@
+@@ -1023,6 +1030,13 @@
  #define USBH_PRIV_SETUP_IOC_SHIFT	4
  #define USBH_PRIV_SETUP_IOC_MASK	(1 << USBH_PRIV_SETUP_IOC_SHIFT)
  

target/linux/brcm63xx/patches-3.14/348-MIPS-BCM63XX-fix-BCM63268-USB-clock.patch

@@ -10,7 +10,7 @@
  
  /*************************************************************************
   * _REG relative to RSET_WDT
-@@ -1666,6 +1669,11 @@
+@@ -1546,6 +1549,11 @@
  #define STRAPBUS_63268_FCVO_SHIFT	21
  #define STRAPBUS_63268_FCVO_MASK	(0xf << STRAPBUS_63268_FCVO_SHIFT)
  

target/linux/brcm63xx/patches-3.14/349-MIPS-BCM63XX-add-BCM63268-USB-support.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
 +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -1152,11 +1152,18 @@
+@@ -1032,11 +1032,18 @@
  #define USBH_PRIV_SETUP_6368_REG	0x28
  #define USBH_PRIV_SETUP_IOC_SHIFT	4
  #define USBH_PRIV_SETUP_IOC_MASK	(1 << USBH_PRIV_SETUP_IOC_SHIFT)

target/linux/brcm63xx/patches-3.14/403-6358-enet1-external-mii-clk.patch

@@ -11,7 +11,7 @@
  	bcm_gpio_writel(val, GPIO_MODE_REG);
 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
 +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -770,6 +770,8 @@
+@@ -650,6 +650,8 @@
  #define GPIO_MODE_6358_EXTRA_SPI_SS	(1 << 7)
  #define GPIO_MODE_6358_SERIAL_LED	(1 << 10)
  #define GPIO_MODE_6358_UTOPIA		(1 << 12)

target/linux/brcm63xx/patches-3.14/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch

@@ -10,7 +10,7 @@ Subject: [PATCH 54/81] bcm63xx_enet: enable rgmii clock on external ports
 
 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
 +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -1086,6 +1086,19 @@
+@@ -966,6 +966,19 @@
  #define ENETSW_PORTOV_FDX_MASK		(1 << 1)
  #define ENETSW_PORTOV_LINKUP_MASK	(1 << 0)
  

target/linux/brcm63xx/patches-3.14/411-MIPS-BCM63XX-Register-SPI-flash-if-present.patch

@@ -115,7 +115,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
  		return -ENODEV;
 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
 +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -827,6 +827,7 @@
+@@ -707,6 +707,7 @@
  #define GPIO_STRAPBUS_REG		0x40
  #define STRAPBUS_6358_BOOT_SEL_PARALLEL (1 << 1)
  #define STRAPBUS_6358_BOOT_SEL_SERIAL	(0 << 1)
@@ -123,7 +123,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
  #define STRAPBUS_6368_BOOT_SEL_MASK	0x3
  #define STRAPBUS_6368_BOOT_SEL_NAND	0
  #define STRAPBUS_6368_BOOT_SEL_SERIAL	1
-@@ -1697,6 +1698,7 @@
+@@ -1577,6 +1578,7 @@
  #define IDDQ_CTRL_63268_USBH		(1 << 4)
  
  #define MISC_STRAPBUS_6328_REG		0x240

target/linux/brcm63xx/patches-3.14/414-MTD-m25p80-allow-passing-pp_data.patch

@@ -10,7 +10,7 @@ Subject: [PATCH 64/79] MTD: m25p80: allow passing pp_data
 
 --- a/drivers/mtd/devices/m25p80.c
 +++ b/drivers/mtd/devices/m25p80.c
-@@ -992,6 +992,9 @@ static int m25p_probe(struct spi_device
+@@ -1149,6 +1149,9 @@ static int m25p_probe(struct spi_device
  			dev_warn(&spi->dev, "unrecognized id %s\n", data->type);
  	}