ath9k: rework radio stop/start cleanup, avoid duplicate rx/tx stop, avoid early phy stop

SVN-Revision: 29132
This commit is contained in:
Felix Fietkau 2011-11-14 21:21:03 +00:00
parent 8b20bfafdf
commit b14b5bb038
3 changed files with 56 additions and 74 deletions

View file

@ -1,26 +1,5 @@
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -124,14 +124,14 @@ void ath9k_ps_restore(struct ath_softc *
!(sc->ps_flags & (PS_WAIT_FOR_BEACON |
PS_WAIT_FOR_CAB |
PS_WAIT_FOR_PSPOLL_DATA |
- PS_WAIT_FOR_TX_ACK)))
+ PS_WAIT_FOR_TX_ACK))) {
mode = ATH9K_PM_NETWORK_SLEEP;
- else
- goto unlock;
- spin_lock(&common->cc_lock);
- ath_hw_cycle_counters_update(common);
- spin_unlock(&common->cc_lock);
+ spin_lock(&common->cc_lock);
+ ath_hw_cycle_counters_update(common);
+ spin_unlock(&common->cc_lock);
+ } else
+ goto unlock;
ath9k_hw_setpower(sc->sc_ah, mode);
@@ -880,82 +880,6 @@ chip_reset:
#undef SCHED_INTR
}
@ -131,24 +110,25 @@
spin_unlock_bh(&sc->sc_pcu_lock);
if ((ah->btcoex_hw.scheme != ATH_BTCOEX_CFG_NONE) &&
@@ -1260,9 +1197,6 @@ static void ath9k_stop(struct ieee80211_
sc->rx.frag = NULL;
}
@@ -1248,33 +1185,39 @@ static void ath9k_stop(struct ieee80211_
* before setting the invalid flag. */
ath9k_hw_disable_interrupts(ah);
- /* disable HAL and put h/w to sleep */
- ath9k_hw_disable(ah);
-
spin_unlock_bh(&sc->sc_pcu_lock);
/* we can now sync irq and kill any running tasklets, since we already
@@ -1271,10 +1205,27 @@ static void ath9k_stop(struct ieee80211_
tasklet_kill(&sc->intr_tq);
tasklet_kill(&sc->bcon_tasklet);
- ath9k_ps_restore(sc);
-
sc->ps_idle = true;
- ath_radio_disable(sc, hw);
- if (!(sc->sc_flags & SC_OP_INVALID)) {
- ath_drain_all_txq(sc, false);
- ath_stoprecv(sc);
- ath9k_hw_phy_disable(ah);
- } else
- sc->rx.rxlink = NULL;
+ spin_unlock_bh(&sc->sc_pcu_lock);
+
+ /* we can now sync irq and kill any running tasklets, since we already
+ * disabled interrupts and not holding a spin lock */
+ synchronize_irq(sc->irq);
+ tasklet_kill(&sc->intr_tq);
+ tasklet_kill(&sc->bcon_tasklet);
+
+ sc->ps_idle = true;
+
+ spin_lock_bh(&sc->sc_pcu_lock);
+
@ -156,23 +136,38 @@
+ ath9k_hw_cfg_gpio_input(ah, ah->led_pin);
+
+ ath_prepare_reset(sc, false, true);
+
if (sc->rx.frag) {
dev_kfree_skb_any(sc->rx.frag);
sc->rx.frag = NULL;
}
- /* disable HAL and put h/w to sleep */
- ath9k_hw_disable(ah);
+ if (!ah->curchan)
+ ah->curchan = ath9k_cmn_get_curchannel(hw, ah);
+
- spin_unlock_bh(&sc->sc_pcu_lock);
+ ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
+ ath9k_hw_phy_disable(ah);
+ ath9k_hw_disable(ah);
+
- /* we can now sync irq and kill any running tasklets, since we already
- * disabled interrupts and not holding a spin lock */
- synchronize_irq(sc->irq);
- tasklet_kill(&sc->intr_tq);
- tasklet_kill(&sc->bcon_tasklet);
+ ath9k_hw_configpcipowersave(ah, true);
+
- ath9k_ps_restore(sc);
+ spin_unlock_bh(&sc->sc_pcu_lock);
+
- sc->ps_idle = true;
- ath_radio_disable(sc, hw);
+ ath9k_ps_restore(sc);
sc->sc_flags |= SC_OP_INVALID;
@@ -1598,8 +1549,8 @@ static int ath9k_config(struct ieee80211
@@ -1598,8 +1541,8 @@ static int ath9k_config(struct ieee80211
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
struct ieee80211_conf *conf = &hw->conf;
@ -182,7 +177,7 @@
mutex_lock(&sc->mutex);
/*
@@ -1608,16 +1559,8 @@ static int ath9k_config(struct ieee80211
@@ -1608,16 +1551,8 @@ static int ath9k_config(struct ieee80211
* of the changes. Likewise we must only disable the radio towards
* the end.
*/
@ -200,7 +195,7 @@
/*
* We just prepare to enable PS. We have to wait until our AP has
@@ -1742,19 +1685,13 @@ static int ath9k_config(struct ieee80211
@@ -1742,19 +1677,13 @@ static int ath9k_config(struct ieee80211
ath_dbg(common, ATH_DBG_CONFIG,
"Set power: %d\n", conf->power_level);
sc->config.txpowlimit = 2 * conf->power_level;
@ -223,34 +218,21 @@
}
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -302,26 +302,12 @@ static void ath_pci_remove(struct pci_de
@@ -306,12 +306,11 @@ static int ath_pci_suspend(struct device
struct ieee80211_hw *hw = pci_get_drvdata(pdev);
struct ath_softc *sc = hw->priv;
static int ath_pci_suspend(struct device *device)
{
- struct pci_dev *pdev = to_pci_dev(device);
- struct ieee80211_hw *hw = pci_get_drvdata(pdev);
- struct ath_softc *sc = hw->priv;
-
- ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 1);
-
- /* The device has to be moved to FULLSLEEP forcibly.
- * Otherwise the chip never moved to full sleep,
- * when no interface is up.
- */
- ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_FULL_SLEEP);
-
/* The device has to be moved to FULLSLEEP forcibly.
* Otherwise the chip never moved to full sleep,
* when no interface is up.
*/
+ ath9k_hw_disable(sc->sc_ah);
ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_FULL_SLEEP);
return 0;
}
static int ath_pci_resume(struct device *device)
{
struct pci_dev *pdev = to_pci_dev(device);
- struct ieee80211_hw *hw = pci_get_drvdata(pdev);
- struct ath_softc *sc = hw->priv;
u32 val;
/*
@@ -333,22 +319,6 @@ static int ath_pci_resume(struct device
@@ -333,22 +332,6 @@ static int ath_pci_resume(struct device
if ((val & 0x0000ff00) != 0)
pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);

View file

@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -2259,9 +2259,6 @@ static void ath9k_flush(struct ieee80211
@@ -2251,9 +2251,6 @@ static void ath9k_flush(struct ieee80211
return;
}
@ -10,7 +10,7 @@
for (j = 0; j < timeout; j++) {
bool npend = false;
@@ -2279,21 +2276,22 @@ static void ath9k_flush(struct ieee80211
@@ -2271,21 +2268,22 @@ static void ath9k_flush(struct ieee80211
}
if (!npend)

View file

@ -15,7 +15,7 @@
/*
* Reset key cache to sane defaults (all entries cleared) instead of
@@ -1209,8 +1211,10 @@ static void ath9k_stop(struct ieee80211_
@@ -1197,8 +1199,10 @@ static void ath9k_stop(struct ieee80211_
spin_lock_bh(&sc->sc_pcu_lock);