ath79: Add support for TP-Link TL-WR842N-v2
This PR adds support for TP-Link TL-WR842N-v2 router which is supported by ar71xx to ath79. This is a low cost model with following specs: CPU: Atheros AR9341 SoC RAM: 32 MB DDR1 Flash: 8 MB NOR SPI Switch: Internal AR9341 5 port 10/100 Mbit Ports: 5x 10/100 Mbit(1x WAN, 4x LAN) USB: 1x USB2.0 WLAN: 2.4 GHZ AR9341 Installation: Simply flash the factory image through stock firmware WEB UI. Signed-off-by: Robert Marko <robimarko@gmail.com>
This commit is contained in:
Robert Marko
Mathias Kresin
parent
ebd57de1f9
commit
adbd9d1f1f
4 changed files with 221 additions and 1 deletions
|
|
@ -77,7 +77,8 @@ tplink,tl-wr941-v4)
|
|||
ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x10"
|
||||
;;
|
||||
tplink,tl-wr740nd-v4|\
|
||||
tplink,tl-wr741nd-v4)
|
||||
tplink,tl-wr741nd-v4|\
|
||||
tplink,tl-wr842n-v2)
|
||||
ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth0"
|
||||
ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x04"
|
||||
ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
|
||||
|
|
|
|||
|
|
@ -150,6 +150,11 @@ ath79_setup_interfaces()
|
|||
ucidef_add_switch "switch0" \
|
||||
"0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
|
||||
;;
|
||||
tplink,tl-wr842n-v2)
|
||||
ucidef_set_interface_wan "eth0"
|
||||
ucidef_add_switch "switch0" \
|
||||
"0@eth1" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
|
||||
;;
|
||||
tplink,tl-wr941-v2)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
|
||||
;;
|
||||
|
|
|
|||
204
target/linux/ath79/dts/ar9341_tplink_tl-wr842n-v2.dts
Normal file
204
target/linux/ath79/dts/ar9341_tplink_tl-wr842n-v2.dts
Normal file
|
|
@ -0,0 +1,204 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
#include "ar9341.dtsi"
|
||||
|
||||
/ {
|
||||
model = "TP-Link TL-WR842N/ND v2";
|
||||
compatible = "tplink,tl-wr842n-v2";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart;
|
||||
led-boot = &system;
|
||||
led-failsafe = &system;
|
||||
led-running = &system;
|
||||
led-upgrade = &system;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys-polled";
|
||||
poll-interval = <20>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&jtag_disable_pins>;
|
||||
|
||||
reset {
|
||||
label = "Reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
|
||||
rfkill {
|
||||
label = "WiFi";
|
||||
linux,code = <KEY_RFKILL>;
|
||||
gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
system: power {
|
||||
label = "tp-link:green:power";
|
||||
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
||||
default-state = "on";
|
||||
};
|
||||
|
||||
wlan {
|
||||
label = "tp-link:green:wlan";
|
||||
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
linux,default-trigger = "phy0tpt";
|
||||
};
|
||||
|
||||
qss {
|
||||
label = "tp-link:green:qss";
|
||||
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
wan {
|
||||
label = "tp-link:green:wan";
|
||||
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
lan1 {
|
||||
label = "tp-link:green:lan1";
|
||||
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
lan2 {
|
||||
label = "tp-link:green:lan2";
|
||||
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
lan3 {
|
||||
label = "tp-link:green:lan3";
|
||||
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
lan4 {
|
||||
label = "tp-link:green:lan4";
|
||||
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
usb {
|
||||
label = "tp-link:green:usb";
|
||||
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
trigger-sources = <&hub_port>;
|
||||
linux,default-trigger = "usbport";
|
||||
};
|
||||
};
|
||||
|
||||
gpio-export {
|
||||
compatible = "gpio-export";
|
||||
|
||||
gpio_usb_power {
|
||||
gpio-export,name = "tp-link:power:usb";
|
||||
gpio-export,output = <1>;
|
||||
gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ref {
|
||||
clock-frequency = <25000000>;
|
||||
};
|
||||
|
||||
&uart {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi {
|
||||
num-cs = <1>;
|
||||
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <25000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
uboot: partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x000000 0x020000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@20000 {
|
||||
label = "firmware";
|
||||
reg = <0x020000 0x7d0000>;
|
||||
};
|
||||
|
||||
art: partition@7f0000 {
|
||||
label = "art";
|
||||
reg = <0x7f0000 0x010000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usb {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "okay";
|
||||
|
||||
hub_port: port@1 {
|
||||
reg = <1>;
|
||||
#trigger-source-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&usb_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ð0 {
|
||||
status = "okay";
|
||||
|
||||
phy-handle = <&swphy0>;
|
||||
mtd-mac-address = <&uboot 0x1fc00>;
|
||||
mtd-mac-address-increment = <(-1)>;
|
||||
};
|
||||
|
||||
ð1 {
|
||||
status = "okay";
|
||||
|
||||
phy-handle = <&swphy4>;
|
||||
mtd-mac-address = <&uboot 0x1fc00>;
|
||||
phy-mode = "gmii";
|
||||
pll-data = <0x06000000 0x00000101 0x00001616>;
|
||||
|
||||
gmac-config {
|
||||
device = <&gmac>;
|
||||
switch-phy-swap = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
|
||||
mtd-cal-data = <&art 0x1000>;
|
||||
mtd-mac-address = <&uboot 0x1fc00>;
|
||||
};
|
||||
|
|
@ -77,6 +77,16 @@ define Device/tplink_tl-wr1043nd-v1
|
|||
endef
|
||||
TARGET_DEVICES += tplink_tl-wr1043nd-v1
|
||||
|
||||
define Device/tplink_tl-wr842n-v2
|
||||
$(Device/tplink-8mlzma)
|
||||
ATH_SOC := ar9341
|
||||
DEVICE_TITLE := TP-LINK TL-WR842N/ND v2
|
||||
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
|
||||
TPLINK_HWID := 0x8420002
|
||||
SUPPORTED_DEVICES += tl-wr842n-v2
|
||||
endef
|
||||
TARGET_DEVICES += tplink_tl-wr842n-v2
|
||||
|
||||
define Device/tplink_tl-wr1043nd-v2
|
||||
$(Device/tplink-8mlzma)
|
||||
ATH_SOC := qca9558
|
||||
|
|
|
|||
Loading…
Reference in a new issue