KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

kernel: backport ssb patches up to changes queued for 4.1

Browse source 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45306
This commit is contained in:
Rafał Miłecki 2015-04-07 22:06:17 +00:00
parent 8100b227a9
commit a9d2a1aa29
2 changed files with 84 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

55
target/linux/generic/patches-3.18/020-ssb_update.patch
View file

@ -76,3 +76,58 @@
return pci_register_driver(driver);
}
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -357,6 +357,15 @@ static void ssb_pcicore_init_hostmode(st
pcicore_write32(pc, SSB_PCICORE_SBTOPCI2,
SSB_PCICORE_SBTOPCI_MEM | SSB_PCI_DMA);
+ /*
+ * Accessing PCI config without a proper delay after devices reset (not
+ * GPIO reset) was causing reboots on WRT300N v1.0.
+ * Tested delay 850 us lowered reboot chance to 50-80%, 1000 us fixed it
+ * completely. Flushing all writes was also tested but with no luck.
+ */
+ if (pc->dev->bus->chip_id == 0x4704)
+ usleep_range(1000, 2000);
+
/* Enable PCI bridge BAR0 prefetch and burst */
val = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
ssb_extpci_write_config(pc, 0, 0, 0, PCI_COMMAND, &val, 2);
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -90,25 +90,6 @@ found:
}
#endif /* CONFIG_SSB_PCMCIAHOST */
-#ifdef CONFIG_SSB_SDIOHOST
-struct ssb_bus *ssb_sdio_func_to_bus(struct sdio_func *func)
-{
- struct ssb_bus *bus;
-
- ssb_buses_lock();
- list_for_each_entry(bus, &buses, list) {
- if (bus->bustype == SSB_BUSTYPE_SDIO &&
- bus->host_sdio == func)
- goto found;
- }
- bus = NULL;
-found:
- ssb_buses_unlock();
-
- return bus;
-}
-#endif /* CONFIG_SSB_SDIOHOST */
-
int ssb_for_each_bus_call(unsigned long data,
int (*func)(struct ssb_bus *bus, unsigned long data))
{
@@ -1154,6 +1135,8 @@ static u32 ssb_tmslow_reject_bitmask(str
case SSB_IDLOW_SSBREV_25: /* TODO - find the proper REJECT bit */
case SSB_IDLOW_SSBREV_27: /* same here */
return SSB_TMSLOW_REJECT; /* this is a guess */
+ case SSB_IDLOW_SSBREV:
+ break;
default:
WARN(1, KERN_INFO "ssb: Backplane Revision 0x%.8X\n", rev);
}

29
target/linux/generic/patches-4.0/020-ssb_update.patch Normal file
View file

@ -0,0 +1,29 @@
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -357,6 +357,15 @@ static void ssb_pcicore_init_hostmode(st
pcicore_write32(pc, SSB_PCICORE_SBTOPCI2,
SSB_PCICORE_SBTOPCI_MEM | SSB_PCI_DMA);
+ /*
+ * Accessing PCI config without a proper delay after devices reset (not
+ * GPIO reset) was causing reboots on WRT300N v1.0.
+ * Tested delay 850 us lowered reboot chance to 50-80%, 1000 us fixed it
+ * completely. Flushing all writes was also tested but with no luck.
+ */
+ if (pc->dev->bus->chip_id == 0x4704)
+ usleep_range(1000, 2000);
+
/* Enable PCI bridge BAR0 prefetch and burst */
val = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
ssb_extpci_write_config(pc, 0, 0, 0, PCI_COMMAND, &val, 2);
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -1135,6 +1135,8 @@ static u32 ssb_tmslow_reject_bitmask(str
case SSB_IDLOW_SSBREV_25: /* TODO - find the proper REJECT bit */
case SSB_IDLOW_SSBREV_27: /* same here */
return SSB_TMSLOW_REJECT; /* this is a guess */
+ case SSB_IDLOW_SSBREV:
+ break;
default:
WARN(1, KERN_INFO "ssb: Backplane Revision 0x%.8X\n", rev);
}