resync ixp4xx 2.6.30 patches with -rc3

SVN-Revision: 15497

target/linux/ixp4xx/patches-2.6.30/090-increase_entropy_pools.patch

@@ -1,6 +1,6 @@
 --- a/drivers/char/random.c
 +++ b/drivers/char/random.c
-@@ -259,9 +259,9 @@
+@@ -263,9 +263,9 @@
  /*
   * Configuration information
   */

target/linux/ixp4xx/patches-2.6.30/191-cambria_optional_uart.patch

@@ -106,7 +106,7 @@
  	unsigned int	type;		/* If UPF_FIXED_TYPE */
 --- a/include/linux/serial_core.h
 +++ b/include/linux/serial_core.h
-@@ -270,6 +270,7 @@ struct uart_port {
+@@ -273,6 +273,7 @@ struct uart_port {
  #define UPIO_TSI		(5)			/* Tsi108/109 type IO */
  #define UPIO_DWAPB		(6)			/* DesignWare APB UART */
  #define UPIO_RM9000		(7)			/* RM9000 type IO */
@@ -114,7 +114,7 @@
  
  	unsigned int		read_status_mask;	/* driver specific */
  	unsigned int		ignore_status_mask;	/* driver specific */
-@@ -312,6 +313,7 @@ struct uart_port {
+@@ -315,6 +316,7 @@ struct uart_port {
  
  	unsigned int		mctrl;			/* current modem ctrl settings */
  	unsigned int		timeout;		/* character-based timeout */
@@ -199,7 +199,7 @@
  			uart->port.dev = port->dev;
 --- a/drivers/serial/serial_core.c
 +++ b/drivers/serial/serial_core.c
-@@ -2142,6 +2142,7 @@ uart_report_port(struct uart_driver *drv
+@@ -2138,6 +2138,7 @@ uart_report_port(struct uart_driver *drv
  		snprintf(address, sizeof(address),
  			 "I/O 0x%lx offset 0x%x", port->iobase, port->hub6);
  		break;
@@ -207,7 +207,7 @@
  	case UPIO_MEM:
  	case UPIO_MEM32:
  	case UPIO_AU:
-@@ -2556,6 +2557,7 @@ int uart_match_port(struct uart_port *po
+@@ -2552,6 +2553,7 @@ int uart_match_port(struct uart_port *po
  	case UPIO_HUB6:
  		return (port1->iobase == port2->iobase) &&
  		       (port1->hub6   == port2->hub6);

target/linux/ixp4xx/patches-2.6.30/295-latch_led_driver.patch

@@ -1,8 +1,8 @@
 --- a/drivers/leds/Kconfig
 +++ b/drivers/leds/Kconfig
-@@ -119,6 +119,13 @@ config LEDS_GPIO
- 	  outputs. To be useful the particular board must have LEDs
- 	  and they must be connected to the GPIO lines.
+@@ -155,6 +155,13 @@ config LEDS_LP5521
+ 	  This driver can be built as a module by choosing 'M'. The module
+ 	  will be called leds-lp5521.
  
 +config LEDS_LATCH
 +	tristate "LED Support for Memory Latched LEDs"
@@ -12,8 +12,8 @@
 +
 +
  config LEDS_CLEVO_MAIL
- 	tristate "Mail LED on Clevo notebook (EXPERIMENTAL)"
- 	depends on LEDS_CLASS && X86 && SERIO_I8042 && DMI && EXPERIMENTAL
+ 	tristate "Mail LED on Clevo notebook"
+ 	depends on LEDS_CLASS && X86 && SERIO_I8042 && DMI
 --- /dev/null
 +++ b/drivers/leds/leds-latch.c
 @@ -0,0 +1,149 @@
@@ -168,7 +168,7 @@
 +MODULE_LICENSE("GPL");
 --- a/drivers/leds/Makefile
 +++ b/drivers/leds/Makefile
-@@ -18,6 +18,7 @@ obj-$(CONFIG_LEDS_COBALT_RAQ)		+= leds-c
+@@ -20,6 +20,7 @@ obj-$(CONFIG_LEDS_COBALT_RAQ)		+= leds-c
  obj-$(CONFIG_LEDS_SUNFIRE)		+= leds-sunfire.o
  obj-$(CONFIG_LEDS_PCA9532)		+= leds-pca9532.o
  obj-$(CONFIG_LEDS_GPIO)			+= leds-gpio.o
@@ -178,7 +178,7 @@
  obj-$(CONFIG_LEDS_FSG)			+= leds-fsg.o
 --- a/include/linux/leds.h
 +++ b/include/linux/leds.h
-@@ -151,5 +151,19 @@ struct gpio_led_platform_data {
+@@ -153,5 +153,19 @@ struct gpio_led_platform_data {
  					unsigned long *delay_off);
  };
  

target/linux/ixp4xx/patches-2.6.30/402-ixp4xx_gpiolib.patch

@@ -50,14 +50,14 @@
  
 --- a/arch/arm/Kconfig
 +++ b/arch/arm/Kconfig
-@@ -365,6 +365,7 @@ config ARCH_IXP4XX
+@@ -374,6 +374,7 @@ config ARCH_IXP4XX
  	select GENERIC_GPIO
  	select GENERIC_TIME
  	select GENERIC_CLOCKEVENTS
 +	select ARCH_REQUIRE_GPIOLIB
- 	select DMABOUNCE if PCI
  	help
  	  Support for Intel's IXP4XX (XScale) family of processors.
+ 
 --- a/arch/arm/mach-ixp4xx/include/mach/gpio.h
 +++ b/arch/arm/mach-ixp4xx/include/mach/gpio.h
 @@ -27,47 +27,31 @@