diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index bbadc3206e..262160490e 100755 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -66,6 +66,9 @@ get_status_led() { rt-n15) status_led="rt-n15:blue:power" ;; + rt-n56u) + status_led="asus:blue:power" + ;; v22rw-2x2) status_led="v22rw-2x2:green:security" ;; diff --git a/target/linux/ramips/base-files/etc/uci-defaults/network b/target/linux/ramips/base-files/etc/uci-defaults/network index 59d794f1d4..0f97bc3647 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/network +++ b/target/linux/ramips/base-files/etc/uci-defaults/network @@ -43,6 +43,13 @@ ramips_setup_interfaces() ucidef_add_switch_vlan "rtl8366rb" "2" "0 5t" ;; + rt-n56u) + ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" + ucidef_add_switch "switch0" "1" "1" + ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 8t" + ucidef_add_switch_vlan "switch0" "2" "4 8t" + ;; + wcr-150gn) ucidef_set_interface_lan_wan "eth0.2" "eth0.1" ;; @@ -109,6 +116,11 @@ ramips_setup_macs() wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1) ;; + rt-n56u) + lan_mac=$(ramips_get_mac_binary factory 4) + wan_mac=$(ramips_get_mac_binary factory 32772) + ;; + w502u) lan_mac=$(ramips_get_mac_binary factory 40) wan_mac=$(ramips_get_mac_binary factory 46) diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac index 121b471f4f..9f5c02446c 100644 --- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac +++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac @@ -10,6 +10,7 @@ preinit_set_mac_address() { case $(ramips_board_name) in bc2 |\ nw718 |\ + rt-n56u |\ esr-9753) mac=$(ramips_get_mac_binary factory 4) mac=$(maccalc or "$mac" "02:00:00:00:00:00") diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 5204820fb9..9c1a7dcb57 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -101,6 +101,9 @@ ramips_board_name() { *"RT-N15") name="rt-n15" ;; + *"RT-N56U") + name="rt-n56u" + ;; *"Sparklan WCR-150GN") name="wcr-150gn" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 2751fdda29..2bcfa4b821 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -28,6 +28,7 @@ platform_check_image() { omni-emb | \ rt-g32-b1 | \ rt-n15 | \ + rt-n56u | \ w502u |\ wr6202 |\ v22rw-2x2 | \ diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h index 600e8bf905..fa6d985665 100644 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h +++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h @@ -46,4 +46,7 @@ enum ramips_mach_type { RAMIPS_MACH_WL351, /* Sitecom WL-351 v1 002 */ RAMIPS_MACH_WR512_3GN, /* SH-WR512NU/WS-WR512N1-like 3GN*/ RAMIPS_MACH_WR6202, /* Accton WR6202 */ + + /* RT3662 based machines */ + RAMIPS_MACH_RT_N56U, /* Asus RT-N56U */ }; diff --git a/target/linux/ramips/files/arch/mips/ralink/rt3883/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt3883/Kconfig index 7b4579adbc..1b1c057c84 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt3883/Kconfig +++ b/target/linux/ramips/files/arch/mips/ralink/rt3883/Kconfig @@ -2,6 +2,11 @@ if RALINK_RT3883 menu "Ralink RT3662/RT3883 machine selection" +config RT3883_MACH_RT_N56U + bool "Asus RT-N56U support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + endmenu endif diff --git a/target/linux/ramips/files/arch/mips/ralink/rt3883/Makefile b/target/linux/ramips/files/arch/mips/ralink/rt3883/Makefile index f8098592b1..3068d58d2e 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt3883/Makefile +++ b/target/linux/ramips/files/arch/mips/ralink/rt3883/Makefile @@ -10,3 +10,5 @@ obj-y := irq.o setup.o devices.o rt3883.o clock.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o + +obj-$(CONFIG_RT3883_MACH_RT_N56U) += mach-rt-n56u.o diff --git a/target/linux/ramips/files/arch/mips/ralink/rt3883/mach-rt-n56u.c b/target/linux/ramips/files/arch/mips/ralink/rt3883/mach-rt-n56u.c new file mode 100644 index 0000000000..3f037476ef --- /dev/null +++ b/target/linux/ramips/files/arch/mips/ralink/rt3883/mach-rt-n56u.c @@ -0,0 +1,138 @@ +/* + * Asus RT-N56U board support + * + * Copyright (C) 2011-2012 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include "devices.h" + +#define RT_N56U_GPIO_LED_POWER 0 +#define RT_N56U_GPIO_LED_LAN 19 +#define RT_N56U_GPIO_LED_USB 24 +#define RT_N56U_GPIO_LED_WAN 27 +#define RT_N56U_GPIO_BUTTON_RESET 13 +#define RT_N56U_GPIO_BUTTON_WPS 26 + +#define RT_N56U_GPIO_RTL8367_SCK 2 +#define RT_N56U_GPIO_RTL8367_SDA 1 + +#define RT_N56U_KEYS_POLL_INTERVAL 20 +#define RT_N56U_KEYS_DEBOUNCE_INTERVAL (3 * RT_N56U_KEYS_POLL_INTERVAL) + +static struct gpio_led rt_n56u_leds_gpio[] __initdata = { + { + .name = "asus:blue:power", + .gpio = RT_N56U_GPIO_LED_POWER, + .active_low = 1, + }, + { + .name = "asus:blue:lan", + .gpio = RT_N56U_GPIO_LED_LAN, + .active_low = 1, + }, + { + .name = "asus:blue:wan", + .gpio = RT_N56U_GPIO_LED_WAN, + .active_low = 1, + }, + { + .name = "asus:blue:usb", + .gpio = RT_N56U_GPIO_LED_USB, + .active_low = 1, + }, +}; + +static struct gpio_keys_button rt_n56u_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = RT_N56U_KEYS_DEBOUNCE_INTERVAL, + .gpio = RT_N56U_GPIO_BUTTON_RESET, + .active_low = 1, + }, + { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = RT_N56U_KEYS_DEBOUNCE_INTERVAL, + .gpio = RT_N56U_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +static struct rtl8367_extif_config rt_n56u_rtl8367_extif1_cfg = { + .txdelay = 1, + .rxdelay = 0, + .mode = RTL8367_EXTIF_MODE_RGMII, + .ability = { + .force_mode = 1, + .txpause = 1, + .rxpause = 1, + .link = 1, + .duplex = 1, + .speed = RTL8367_PORT_SPEED_1000, + } +}; + +static struct rtl8367_platform_data rt_n56u_rtl8367_data = { + .gpio_sda = RT_N56U_GPIO_RTL8367_SDA, + .gpio_sck = RT_N56U_GPIO_RTL8367_SCK, + .extif1_cfg = &rt_n56u_rtl8367_extif1_cfg, +}; + +static struct platform_device rt_n56u_rtl8367_device = { + .name = RTL8367_DRIVER_NAME, + .id = -1, + .dev = { + .platform_data = &rt_n56u_rtl8367_data, + } +}; + +static void __init rt_n56u_init(void) +{ + rt3883_gpio_init(RT3883_GPIO_MODE_I2C | + RT3883_GPIO_MODE_UART0(RT3883_GPIO_MODE_GPIO) | + RT3883_GPIO_MODE_JTAG | + RT3883_GPIO_MODE_PCI(RT3883_GPIO_MODE_PCI_FNC)); + + rt3883_register_pflash(0); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(rt_n56u_leds_gpio), + rt_n56u_leds_gpio); + + ramips_register_gpio_buttons(-1, RT_N56U_KEYS_POLL_INTERVAL, + ARRAY_SIZE(rt_n56u_gpio_buttons), + rt_n56u_gpio_buttons); + + platform_device_register(&rt_n56u_rtl8367_device); + + rt3883_register_wlan(); + + rt3883_eth_data.speed = SPEED_1000; + rt3883_eth_data.duplex = DUPLEX_FULL; + rt3883_eth_data.tx_fc = 1; + rt3883_eth_data.rx_fc = 1; + rt3883_register_ethernet(); + + rt3883_register_wdt(false); + rt3883_register_usbhost(); +} + +MIPS_MACHINE(RAMIPS_MACH_RT_N56U, "RT-N56U", "Asus RT-N56U", rt_n56u_init); diff --git a/target/linux/ramips/rt3883/config-2.6.39 b/target/linux/ramips/rt3883/config-2.6.39 index b6d52ea4ec..4301e6e56b 100644 --- a/target/linux/ramips/rt3883/config-2.6.39 +++ b/target/linux/ramips/rt3883/config-2.6.39 @@ -90,6 +90,9 @@ CONFIG_RALINK_DEV_GPIO_LEDS=y CONFIG_RALINK_RT3883=y # CONFIG_RAMIPS_ETH_DEBUG is not set CONFIG_RAMIPS_WDT=y +CONFIG_RT3883_MACH_RT_N56U=y +CONFIG_RTL8366_SMI=y +CONFIG_RTL8367_PHY=y # CONFIG_SCSI_DMA is not set CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RT288X=y diff --git a/target/linux/ramips/rt3883/config-3.2 b/target/linux/ramips/rt3883/config-3.2 index b62d99306c..568f86a3d0 100644 --- a/target/linux/ramips/rt3883/config-3.2 +++ b/target/linux/ramips/rt3883/config-3.2 @@ -89,6 +89,9 @@ CONFIG_RALINK_DEV_GPIO_LEDS=y CONFIG_RALINK_RT3883=y # CONFIG_RAMIPS_ETH_DEBUG is not set CONFIG_RAMIPS_WDT=y +CONFIG_RT3883_MACH_RT_N56U=y +CONFIG_RTL8366_SMI=y +CONFIG_RTL8367_PHY=y # CONFIG_SCSI_DMA is not set CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RT288X=y