lantiq: board.d: cleanup default switch config

Add or fix the physical port number of switch ports to allow LuCI to
display the ports in physical order.

Remove the physical port number in case bridge port and physical port
order are the same.

Reorder the ucidef_add_switch parameter to be aligned with the switch
port number.

Remove board settings which are covered by the default case and remove
comments.

Signed-off-by: Mathias Kresin <dev@kresin.me>
This commit is contained in:
Mathias Kresin 2016-08-23 07:36:00 +02:00
parent 7d02e94e41
commit 96f6bd501a

View file

@ -21,101 +21,88 @@ interface_wan=""
board=$(lantiq_board_name)
case "$board" in
# adm6996
ARV4510PW)
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
wan_mac=$(macaddr_add "$lan_mac" 1)
ucidef_add_switch "switch0" \
"3:lan:1" "2:lan:2" "1:lan:3" "0:lan:4" "5t@eth0"
"0:lan:4" "2:lan:2" "1:lan:3" "3:lan:1" "5t@eth0"
;;
ARV4520PW)
ucidef_add_switch "switch0" \
"3:lan:1" "2:lan:2" "1:lan:3" "0:lan:4" "5t@eth0"
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0"
;;
ACMP252|GIGASX76X)
ucidef_add_switch "switch0" \
"4:lan:1" "3:lan:2" "2:lan:3" "1:lan:4" "5t@eth0"
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
;;
# ar8316
ARV4519PW|ARV7510PW22|ARV7518PW|ARV752DPW22|ARV8539PW22)
ucidef_add_switch "switch0" \
"0t@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4"
"0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
;;
# rtl8306g
ARV7506PW11)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 2)
ucidef_add_switch "switch0" \
"4:lan:1" "3:lan:2" "2:lan:3" "1:lan:4" "5t@eth0"
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
;;
# rtl8306g
ARV7519PW)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 1)
ucidef_add_switch "switch0" \
"0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "4t@eth0"
"0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0"
;;
WBMR)
ucidef_add_switch "switch0" \
"0t@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4"
"0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
;;
VG3503J)
ucidef_set_interface_lan 'eth0'
;;
ARV4518PWR01*)
ucidef_set_interface_lan 'eth0'
;;
DGN3500*)
ucidef_add_switch "switch0" \
"3:lan:1" "2:lan:2" "1:lan:3" "0:lan:4" "5t@eth0"
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0"
;;
FRITZ7360SL)
ucidef_add_switch "switch0" \
"4:lan:1" "2:lan:2" "0:lan:3" "1:lan:4" "6t@eth0"
"0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
;;
H201L)
ucidef_add_switch "switch0" \
"0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "4t@eth0"
"0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0"
;;
#rtl8306g
P2601HNFX)
ucidef_add_switch "switch0" \
"0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "5t@eth0"
"0:lan" "1:lan" "2:lan" "3:lan" "5t@eth0"
;;
P2812HNUF*)
lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
wan_mac=$(macaddr_add "$lan_mac" 1)
ucidef_add_switch "switch0" \
"0:lan:1" "1:lan:2" "2:lan:3" "4:lan:4" "5:lan:5" "6t@eth0"
"0:lan" "1:lan" "2:lan" "4:lan" "5:lan" "6t@eth0"
;;
TDW8970|TDW8980)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 61696)" 1)
ucidef_add_switch "switch0" \
"0:lan:1" "2:lan:2" "4:lan:3" "5:lan:4" "6t@eth0"
"0:lan:2" "2:lan:3" "4:lan:4" "5:lan:1" "6t@eth0"
;;
VR200v)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary romfile 61696)" 1)
ucidef_add_switch "switch0" \
"0:lan:1" "2:lan:2" "4:lan:3" "5:lan:4" "6t@eth0"
"0:lan" "2:lan" "4:lan" "5:lan" "6t@eth0"
;;
ARV7519RW22)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 22)" 1)
ucidef_add_switch "switch0" \
"0:lan:1" "2:lan:2" "3:lan:3" "4:lan:4" "5:lan:5" "6t@eth0"
"0:lan" "2:lan" "3:lan" "4:lan" "5:lan" "6t@eth0"
;;
BTHOMEHUBV2B)
@ -134,19 +121,19 @@ BTHOMEHUBV3A)
BTHOMEHUBV5A)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary caldata 4364)" 1)
ucidef_add_switch "switch0" \
"0:lan:1" "1:lan:2" "2:lan:3" "4:lan:4" "6t@eth0"
"0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
;;
VGV7519)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 1)
ucidef_add_switch "switch0" \
"4:lan:1" "2:lan:2" "1:lan:3" "0:lan:4" "6t@eth0"
"0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "6t@eth0"
;;
VGV7510KW22)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 1)
ucidef_add_switch "switch0" \
"2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "6t@eth0"
"2:lan:2" "3:lan:1" "4:lan:4" "5:lan:3" "6t@eth0"
;;
WBMR300)
@ -160,7 +147,7 @@ EASY80920NAND|EASY80920NOR)
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
wan_mac=$(macaddr_add "$lan_mac" 1)
ucidef_add_switch "switch0" \
"4:lan:1" "2:lan:2" "1:lan:3" "0:lan:3" "5:wan:1" "6t@eth0"
"0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
;;
*)