layerscape: update README

Tis patch is to fix up some descriptions in README.
Per-device rootfs had been supported, and a known issue
had been found. These also should be updated accordingly.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
This commit is contained in:
Yangbo Lu 2018-01-22 16:42:05 +08:00 committed by John Crispin
parent e547bd36bd
commit 94698fa6ab

View file

@ -46,30 +46,28 @@ $ ./scripts/feeds install -a
+-----------------------------------------------------------------+
| [*] Enable all profiles by default |
|-----------------------------------------------------------------|
| [ ] Use a per-device root filesystem that adds profile packages |
| [*] Use a per-device root filesystem that adds profile packages |
|-----------------------------------------------------------------|
| [*] ls1012afrdm-armv8_64b ---- |
| [*] ls1012afrdm-armv8_64b ---> |
|-----------------------------------------------------------------|
| [*] ls1012ardb-armv8_64b ---- |
| [*] ls1012ardb-armv8_64b ---> |
|-----------------------------------------------------------------|
| [*] ls1043ardb-armv8_64b ---- |
| [*] ls1043ardb-armv8_64b ---> |
|-----------------------------------------------------------------|
| [*] ls1046ardb-armv8_64b ---- |
| [*] ls1046ardb-armv8_64b ---> |
|-----------------------------------------------------------------|
| [*] ls1088ardb-armv8_64b ---- |
| [*] ls1088ardb-armv8_64b ---> |
|-----------------------------------------------------------------|
| [*] ls2088ardb-armv8_64b ---- |
| [*] ls2088ardb-armv8_64b ---> |
+-----------------------------------------------------------------+
Note: per-device root filesystem hasn't been supported for now.
2.2 make (or make -j<n>)
------------------------
2.3 Final firmware
------------------
Final firmware would be in bin/targets/layerscape/<subtarget>/, and
named as lede-layerscape-<subtarget>-<device>-squashfs-firmware.bin.
named as openwrt-layerscape-<subtarget>-<device>-<rootfs>-firmware.bin.
3. Program firmware to NOR/QSPI flash
@ -77,9 +75,9 @@ named as lede-layerscape-<subtarget>-<device>-squashfs-firmware.bin.
* LS1043ARDB (NOR flash)
Start up from bank0, and program firmware to bank4 with below commands.
Switch to bank4 to start up LEDE.
Switch to bank4 to start up OpenWrt.
=> tftp a0000000 lede-layerscape-<subtarget>-<device>-squashfs-firmware.bin
=> tftp a0000000 <firmware_name>.bin
=> protect off all
=> erase 64000000 +$filesize
=> cp.b a0000000 64000000 $filesize
@ -88,9 +86,9 @@ named as lede-layerscape-<subtarget>-<device>-squashfs-firmware.bin.
* LS2088ARDB (NOR flash)
Start up from bank0, and program firmware to bank4 with below commands.
Switch to bank4 to start up LEDE.
Switch to bank4 to start up OpenWrt.
=> tftp a0000000 lede-layerscape-<subtarget>-<device>-squashfs-firmware.bin
=> tftp a0000000 <firmware_name>.bin
=> protect off all
=> erase 584000000 +$filesize
=> cp.b a0000000 584000000 $filesize
@ -99,9 +97,9 @@ named as lede-layerscape-<subtarget>-<device>-squashfs-firmware.bin.
* LS1012ARDB (QSPI flash)
Start up from bank1, and program firmware to bank2 with below commands.
Switch to bank2 to start up LEDE.
Switch to bank2 to start up OpenWrt.
=> tftp a0000000 lede-layerscape-<subtarget>-<device>-squashfs-firmware.bin
=> tftp a0000000 <firmware_name>.bin
=> i2c mw 0x24 0x7 0xfc;i2c mw 0x24 0x3 0xf5
=> sf probe 0:0
=> sf erase 0 +$filesize
@ -111,9 +109,9 @@ named as lede-layerscape-<subtarget>-<device>-squashfs-firmware.bin.
* LS1012AFRDM (QSPI flash)
LS1012AFRDM board only has one bank. Start up board, and program firmware
with below commands. Reset to start up LEDE.
with below commands. Reset to start up OpenWrt.
=> tftp 96000000 lede-layerscape-<subtarget>-<device>-squashfs-firmware.bin
=> tftp 96000000 <firmware_name>.bin
=> sf probe 0:0
=> sf erase 0 +$filesize
=> sf write 96000000 0 $filesize
@ -122,9 +120,9 @@ named as lede-layerscape-<subtarget>-<device>-squashfs-firmware.bin.
* LS1046ARDB (QSPI flash)
Start up from bank1, and program firmware to bank2 with below commands.
Switch to bank2 to start up LEDE.
Switch to bank2 to start up OpenWrt.
=> tftp a0000000 lede-layerscape-<subtarget>-<device>-squashfs-firmware.bin
=> tftp a0000000 <firmware_name>.bin
=> sf probe 0:1
=> sf erase 0 +$filesize
=> sf write a0000000 0 $filesize
@ -133,9 +131,9 @@ named as lede-layerscape-<subtarget>-<device>-squashfs-firmware.bin.
* LS1088ARDB (QSPI flash)
Start up from bank0, and program firmware to bank1 with below commands.
Switch to bank1 to start up LEDE.
Switch to bank1 to start up OpenWrt.
=> tftp a0000000 lede-layerscape-<subtarget>-<device>-squashfs-firmware.bin
=> tftp a0000000 <firmware_name>.bin
=> sf probe 0:1
=> sf erase 0 +$filesize
=> sf write a0000000 0 $filesize
@ -146,7 +144,18 @@ named as lede-layerscape-<subtarget>-<device>-squashfs-firmware.bin.
=> i2c mw 66 50 20;i2c mw 66 10 20;i2c mw 66 10 21
4. Other references and sources
4. Known issues and limitation
------------------------------
* u-boot may fail to read MAC addresses from EEPROM on some boards and there
won't be MAC addresses set in environment. This may cause kernel fails to
probe these network interfaces. The workaround is to set MAC addresses
manually, for example,
=> setenv ethaddr 00:04:9F:04:65:4b
=> setenv eth1addr 00:04:9F:04:65:4c
5. Other references and sources
-------------------------------
- NXP LSDK site: https://lsdk.github.io/