KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

bcm53xx: backport Broadcom's iProc QSPI driver

Browse source 
This driver has been added instead of improving spi-bcm53xx. It has some
advantages: allows SPI speed control & hopefully doesn't have bug that
was stopping us from using multiple SPI messages for writing flash data.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
This commit is contained in:
Rafał Miłecki 2017-03-01 06:52:23 +01:00
parent ebf846b005
commit 9209511d61
9 changed files with 2300 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

1
target/linux/bcm53xx/config-4.4
View file

@ -298,6 +298,7 @@ CONFIG_SMP_ON_UP=y
CONFIG_SPARSE_IRQ=y
CONFIG_SPI=y
CONFIG_SPI_BCM53XX=y
# CONFIG_SPI_BCM_QSPI is not set
CONFIG_SPI_BITBANG=y
CONFIG_SPI_GPIO=y
CONFIG_SPI_MASTER=y

832
target/linux/bcm53xx/patches-4.4/083-0001-spi-bcm-qspi-Add-Broadcom-MSPI-driver.patch Normal file
View file

@ -0,0 +1,832 @@
From fa236a7ef24048bafaeed13f68df35a819794758 Mon Sep 17 00:00:00 2001
From: Kamal Dasu <kdasu.kdev@gmail.com>
Date: Wed, 24 Aug 2016 18:04:23 -0400
Subject: [PATCH] spi: bcm-qspi: Add Broadcom MSPI driver
Master SPI driver for Broadcom settop, iProc SoCs. The driver
is used for devices that use SPI protocol on BRCMSTB, NSP, NS2
SoCs. SoC platform driver call exported porbe(), remove()
and suspend/resume pm_ops implemented in this common driver.
Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Signed-off-by: Yendapally Reddy Dhananjaya Reddy
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/spi/Kconfig | 10 +
drivers/spi/Makefile | 1 +
drivers/spi/spi-bcm-qspi.c | 712 +++++++++++++++++++++++++++++++++++++++++++++
drivers/spi/spi-bcm-qspi.h | 63 ++++
4 files changed, 786 insertions(+)
create mode 100644 drivers/spi/spi-bcm-qspi.c
create mode 100644 drivers/spi/spi-bcm-qspi.h
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -147,6 +147,16 @@ config SPI_BCM63XX_HSSPI
This enables support for the High Speed SPI controller present on
newer Broadcom BCM63XX SoCs.
+config SPI_BCM_QSPI
+ tristate "Broadcom BSPI and MSPI controller support"
+ depends on ARCH_BRCMSTB || ARCH_BCM || ARCH_BCM_IPROC || COMPILE_TEST
+ default ARCH_BCM_IPROC
+ help
+ Enables support for the Broadcom SPI flash and MSPI controller.
+ Select this option for any one of BRCMSTB, iProc NSP and NS2 SoCs
+ based platforms. This driver works for both SPI master for spi-nor
+ flash device as well as MSPI device.
+
config SPI_BITBANG
tristate "Utilities for Bitbanging SPI masters"
help
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_SPI_BCM2835AUX) += spi-bcm
obj-$(CONFIG_SPI_BCM53XX) += spi-bcm53xx.o
obj-$(CONFIG_SPI_BCM63XX) += spi-bcm63xx.o
obj-$(CONFIG_SPI_BCM63XX_HSSPI) += spi-bcm63xx-hsspi.o
+obj-$(CONFIG_SPI_BCM_QSPI) += spi-bcm-qspi.o
obj-$(CONFIG_SPI_BFIN5XX) += spi-bfin5xx.o
obj-$(CONFIG_SPI_ADI_V3) += spi-adi-v3.o
obj-$(CONFIG_SPI_BFIN_SPORT) += spi-bfin-sport.o
--- /dev/null
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -0,0 +1,712 @@
+/*
+ * Driver for Broadcom BRCMSTB, NSP, NS2, Cygnus SPI Controllers
+ *
+ * Copyright 2016 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation (the "GPL").
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License version 2 (GPLv2) for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * version 2 (GPLv2) along with this source code.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mtd/cfi.h>
+#include <linux/mtd/spi-nor.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/sysfs.h>
+#include <linux/types.h>
+#include "spi-bcm-qspi.h"
+
+#define DRIVER_NAME "bcm_qspi"
+
+/* MSPI register offsets */
+#define MSPI_SPCR0_LSB 0x000
+#define MSPI_SPCR0_MSB 0x004
+#define MSPI_SPCR1_LSB 0x008
+#define MSPI_SPCR1_MSB 0x00c
+#define MSPI_NEWQP 0x010
+#define MSPI_ENDQP 0x014
+#define MSPI_SPCR2 0x018
+#define MSPI_MSPI_STATUS 0x020
+#define MSPI_CPTQP 0x024
+#define MSPI_SPCR3 0x028
+#define MSPI_TXRAM 0x040
+#define MSPI_RXRAM 0x0c0
+#define MSPI_CDRAM 0x140
+#define MSPI_WRITE_LOCK 0x180
+
+#define MSPI_MASTER_BIT BIT(7)
+
+#define MSPI_NUM_CDRAM 16
+#define MSPI_CDRAM_CONT_BIT BIT(7)
+#define MSPI_CDRAM_BITSE_BIT BIT(6)
+#define MSPI_CDRAM_PCS 0xf
+
+#define MSPI_SPCR2_SPE BIT(6)
+#define MSPI_SPCR2_CONT_AFTER_CMD BIT(7)
+
+#define MSPI_MSPI_STATUS_SPIF BIT(0)
+
+#define INTR_BASE_BIT_SHIFT 0x02
+#define INTR_COUNT 0x07
+
+#define NUM_CHIPSELECT 4
+#define QSPI_SPBR_MIN 8U
+#define QSPI_SPBR_MAX 255U
+
+#define OPCODE_DIOR 0xBB
+#define OPCODE_QIOR 0xEB
+#define OPCODE_DIOR_4B 0xBC
+#define OPCODE_QIOR_4B 0xEC
+
+#define MAX_CMD_SIZE 6
+
+#define ADDR_4MB_MASK GENMASK(22, 0)
+
+/* stop at end of transfer, no other reason */
+#define TRANS_STATUS_BREAK_NONE 0
+/* stop at end of spi_message */
+#define TRANS_STATUS_BREAK_EOM 1
+/* stop at end of spi_transfer if delay */
+#define TRANS_STATUS_BREAK_DELAY 2
+/* stop at end of spi_transfer if cs_change */
+#define TRANS_STATUS_BREAK_CS_CHANGE 4
+/* stop if we run out of bytes */
+#define TRANS_STATUS_BREAK_NO_BYTES 8
+
+/* events that make us stop filling TX slots */
+#define TRANS_STATUS_BREAK_TX (TRANS_STATUS_BREAK_EOM | \
+ TRANS_STATUS_BREAK_DELAY | \
+ TRANS_STATUS_BREAK_CS_CHANGE)
+
+/* events that make us deassert CS */
+#define TRANS_STATUS_BREAK_DESELECT (TRANS_STATUS_BREAK_EOM | \
+ TRANS_STATUS_BREAK_CS_CHANGE)
+
+struct bcm_qspi_parms {
+ u32 speed_hz;
+ u8 mode;
+ u8 bits_per_word;
+};
+
+enum base_type {
+ MSPI,
+ CHIP_SELECT,
+ BASEMAX,
+};
+
+struct bcm_qspi_irq {
+ const char *irq_name;
+ const irq_handler_t irq_handler;
+ u32 mask;
+};
+
+struct bcm_qspi_dev_id {
+ const struct bcm_qspi_irq *irqp;
+ void *dev;
+};
+
+struct qspi_trans {
+ struct spi_transfer *trans;
+ int byte;
+};
+
+struct bcm_qspi {
+ struct platform_device *pdev;
+ struct spi_master *master;
+ struct clk *clk;
+ u32 base_clk;
+ u32 max_speed_hz;
+ void __iomem *base[BASEMAX];
+ struct bcm_qspi_parms last_parms;
+ struct qspi_trans trans_pos;
+ int curr_cs;
+ u32 s3_strap_override_ctrl;
+ bool big_endian;
+ int num_irqs;
+ struct bcm_qspi_dev_id *dev_ids;
+ struct completion mspi_done;
+};
+
+/* Read qspi controller register*/
+static inline u32 bcm_qspi_read(struct bcm_qspi *qspi, enum base_type type,
+ unsigned int offset)
+{
+ return bcm_qspi_readl(qspi->big_endian, qspi->base[type] + offset);
+}
+
+/* Write qspi controller register*/
+static inline void bcm_qspi_write(struct bcm_qspi *qspi, enum base_type type,
+ unsigned int offset, unsigned int data)
+{
+ bcm_qspi_writel(qspi->big_endian, data, qspi->base[type] + offset);
+}
+
+static void bcm_qspi_chip_select(struct bcm_qspi *qspi, int cs)
+{
+ u32 data = 0;
+
+ if (qspi->curr_cs == cs)
+ return;
+ if (qspi->base[CHIP_SELECT]) {
+ data = bcm_qspi_read(qspi, CHIP_SELECT, 0);
+ data = (data & ~0xff) | (1 << cs);
+ bcm_qspi_write(qspi, CHIP_SELECT, 0, data);
+ usleep_range(10, 20);
+ }
+ qspi->curr_cs = cs;
+}
+
+/* MSPI helpers */
+static void bcm_qspi_hw_set_parms(struct bcm_qspi *qspi,
+ const struct bcm_qspi_parms *xp)
+{
+ u32 spcr, spbr = 0;
+
+ if (xp->speed_hz)
+ spbr = qspi->base_clk / (2 * xp->speed_hz);
+
+ spcr = clamp_val(spbr, QSPI_SPBR_MIN, QSPI_SPBR_MAX);
+ bcm_qspi_write(qspi, MSPI, MSPI_SPCR0_LSB, spcr);
+
+ spcr = MSPI_MASTER_BIT;
+ /* for 16 bit the data should be zero */
+ if (xp->bits_per_word != 16)
+ spcr |= xp->bits_per_word << 2;
+ spcr |= xp->mode & 3;
+ bcm_qspi_write(qspi, MSPI, MSPI_SPCR0_MSB, spcr);
+
+ qspi->last_parms = *xp;
+}
+
+static void bcm_qspi_update_parms(struct bcm_qspi *qspi,
+ struct spi_device *spi,
+ struct spi_transfer *trans)
+{
+ struct bcm_qspi_parms xp;
+
+ xp.speed_hz = trans->speed_hz;
+ xp.bits_per_word = trans->bits_per_word;
+ xp.mode = spi->mode;
+
+ bcm_qspi_hw_set_parms(qspi, &xp);
+}
+
+static int bcm_qspi_setup(struct spi_device *spi)
+{
+ struct bcm_qspi_parms *xp;
+
+ if (spi->bits_per_word > 16)
+ return -EINVAL;
+
+ xp = spi_get_ctldata(spi);
+ if (!xp) {
+ xp = kzalloc(sizeof(*xp), GFP_KERNEL);
+ if (!xp)
+ return -ENOMEM;
+ spi_set_ctldata(spi, xp);
+ }
+ xp->speed_hz = spi->max_speed_hz;
+ xp->mode = spi->mode;
+
+ if (spi->bits_per_word)
+ xp->bits_per_word = spi->bits_per_word;
+ else
+ xp->bits_per_word = 8;
+
+ return 0;
+}
+
+static int update_qspi_trans_byte_count(struct bcm_qspi *qspi,
+ struct qspi_trans *qt, int flags)
+{
+ int ret = TRANS_STATUS_BREAK_NONE;
+
+ /* count the last transferred bytes */
+ if (qt->trans->bits_per_word <= 8)
+ qt->byte++;
+ else
+ qt->byte += 2;
+
+ if (qt->byte >= qt->trans->len) {
+ /* we're at the end of the spi_transfer */
+
+ /* in TX mode, need to pause for a delay or CS change */
+ if (qt->trans->delay_usecs &&
+ (flags & TRANS_STATUS_BREAK_DELAY))
+ ret |= TRANS_STATUS_BREAK_DELAY;
+ if (qt->trans->cs_change &&
+ (flags & TRANS_STATUS_BREAK_CS_CHANGE))
+ ret |= TRANS_STATUS_BREAK_CS_CHANGE;
+ if (ret)
+ goto done;
+
+ dev_dbg(&qspi->pdev->dev, "advance msg exit\n");
+ if (spi_transfer_is_last(qspi->master, qt->trans))
+ ret = TRANS_STATUS_BREAK_EOM;
+ else
+ ret = TRANS_STATUS_BREAK_NO_BYTES;
+
+ qt->trans = NULL;
+ }
+
+done:
+ dev_dbg(&qspi->pdev->dev, "trans %p len %d byte %d ret %x\n",
+ qt->trans, qt->trans ? qt->trans->len : 0, qt->byte, ret);
+ return ret;
+}
+
+static inline u8 read_rxram_slot_u8(struct bcm_qspi *qspi, int slot)
+{
+ u32 slot_offset = MSPI_RXRAM + (slot << 3) + 0x4;
+
+ /* mask out reserved bits */
+ return bcm_qspi_read(qspi, MSPI, slot_offset) & 0xff;
+}
+
+static inline u16 read_rxram_slot_u16(struct bcm_qspi *qspi, int slot)
+{
+ u32 reg_offset = MSPI_RXRAM;
+ u32 lsb_offset = reg_offset + (slot << 3) + 0x4;
+ u32 msb_offset = reg_offset + (slot << 3);
+
+ return (bcm_qspi_read(qspi, MSPI, lsb_offset) & 0xff) |
+ ((bcm_qspi_read(qspi, MSPI, msb_offset) & 0xff) << 8);
+}
+
+static void read_from_hw(struct bcm_qspi *qspi, int slots)
+{
+ struct qspi_trans tp;
+ int slot;
+
+ if (slots > MSPI_NUM_CDRAM) {
+ /* should never happen */
+ dev_err(&qspi->pdev->dev, "%s: too many slots!\n", __func__);
+ return;
+ }
+
+ tp = qspi->trans_pos;
+
+ for (slot = 0; slot < slots; slot++) {
+ if (tp.trans->bits_per_word <= 8) {
+ u8 *buf = tp.trans->rx_buf;
+
+ if (buf)
+ buf[tp.byte] = read_rxram_slot_u8(qspi, slot);
+ dev_dbg(&qspi->pdev->dev, "RD %02x\n",
+ buf ? buf[tp.byte] : 0xff);
+ } else {
+ u16 *buf = tp.trans->rx_buf;
+
+ if (buf)
+ buf[tp.byte / 2] = read_rxram_slot_u16(qspi,
+ slot);
+ dev_dbg(&qspi->pdev->dev, "RD %04x\n",
+ buf ? buf[tp.byte] : 0xffff);
+ }
+
+ update_qspi_trans_byte_count(qspi, &tp,
+ TRANS_STATUS_BREAK_NONE);
+ }
+
+ qspi->trans_pos = tp;
+}
+
+static inline void write_txram_slot_u8(struct bcm_qspi *qspi, int slot,
+ u8 val)
+{
+ u32 reg_offset = MSPI_TXRAM + (slot << 3);
+
+ /* mask out reserved bits */
+ bcm_qspi_write(qspi, MSPI, reg_offset, val);
+}
+
+static inline void write_txram_slot_u16(struct bcm_qspi *qspi, int slot,
+ u16 val)
+{
+ u32 reg_offset = MSPI_TXRAM;
+ u32 msb_offset = reg_offset + (slot << 3);
+ u32 lsb_offset = reg_offset + (slot << 3) + 0x4;
+
+ bcm_qspi_write(qspi, MSPI, msb_offset, (val >> 8));
+ bcm_qspi_write(qspi, MSPI, lsb_offset, (val & 0xff));
+}
+
+static inline u32 read_cdram_slot(struct bcm_qspi *qspi, int slot)
+{
+ return bcm_qspi_read(qspi, MSPI, MSPI_CDRAM + (slot << 2));
+}
+
+static inline void write_cdram_slot(struct bcm_qspi *qspi, int slot, u32 val)
+{
+ bcm_qspi_write(qspi, MSPI, (MSPI_CDRAM + (slot << 2)), val);
+}
+
+/* Return number of slots written */
+static int write_to_hw(struct bcm_qspi *qspi, struct spi_device *spi)
+{
+ struct qspi_trans tp;
+ int slot = 0, tstatus = 0;
+ u32 mspi_cdram = 0;
+
+ tp = qspi->trans_pos;
+ bcm_qspi_update_parms(qspi, spi, tp.trans);
+
+ /* Run until end of transfer or reached the max data */
+ while (!tstatus && slot < MSPI_NUM_CDRAM) {
+ if (tp.trans->bits_per_word <= 8) {
+ const u8 *buf = tp.trans->tx_buf;
+ u8 val = buf ? buf[tp.byte] : 0xff;
+
+ write_txram_slot_u8(qspi, slot, val);
+ dev_dbg(&qspi->pdev->dev, "WR %02x\n", val);
+ } else {
+ const u16 *buf = tp.trans->tx_buf;
+ u16 val = buf ? buf[tp.byte / 2] : 0xffff;
+
+ write_txram_slot_u16(qspi, slot, val);
+ dev_dbg(&qspi->pdev->dev, "WR %04x\n", val);
+ }
+ mspi_cdram = MSPI_CDRAM_CONT_BIT;
+ mspi_cdram |= (~(1 << spi->chip_select) &
+ MSPI_CDRAM_PCS);
+ mspi_cdram |= ((tp.trans->bits_per_word <= 8) ? 0 :
+ MSPI_CDRAM_BITSE_BIT);
+
+ write_cdram_slot(qspi, slot, mspi_cdram);
+
+ tstatus = update_qspi_trans_byte_count(qspi, &tp,
+ TRANS_STATUS_BREAK_TX);
+ slot++;
+ }
+
+ if (!slot) {
+ dev_err(&qspi->pdev->dev, "%s: no data to send?", __func__);
+ goto done;
+ }
+
+ dev_dbg(&qspi->pdev->dev, "submitting %d slots\n", slot);
+ bcm_qspi_write(qspi, MSPI, MSPI_NEWQP, 0);
+ bcm_qspi_write(qspi, MSPI, MSPI_ENDQP, slot - 1);
+
+ if (tstatus & TRANS_STATUS_BREAK_DESELECT) {
+ mspi_cdram = read_cdram_slot(qspi, slot - 1) &
+ ~MSPI_CDRAM_CONT_BIT;
+ write_cdram_slot(qspi, slot - 1, mspi_cdram);
+ }
+
+ /* Must flush previous writes before starting MSPI operation */
+ mb();
+ /* Set cont | spe | spifie */
+ bcm_qspi_write(qspi, MSPI, MSPI_SPCR2, 0xe0);
+
+done:
+ return slot;
+}
+
+static int bcm_qspi_transfer_one(struct spi_master *master,
+ struct spi_device *spi,
+ struct spi_transfer *trans)
+{
+ struct bcm_qspi *qspi = spi_master_get_devdata(master);
+ int slots;
+ unsigned long timeo = msecs_to_jiffies(100);
+
+ bcm_qspi_chip_select(qspi, spi->chip_select);
+ qspi->trans_pos.trans = trans;
+ qspi->trans_pos.byte = 0;
+
+ while (qspi->trans_pos.byte < trans->len) {
+ reinit_completion(&qspi->mspi_done);
+
+ slots = write_to_hw(qspi, spi);
+ if (!wait_for_completion_timeout(&qspi->mspi_done, timeo)) {
+ dev_err(&qspi->pdev->dev, "timeout waiting for MSPI\n");
+ return -ETIMEDOUT;
+ }
+
+ read_from_hw(qspi, slots);
+ }
+
+ return 0;
+}
+
+static void bcm_qspi_cleanup(struct spi_device *spi)
+{
+ struct bcm_qspi_parms *xp = spi_get_ctldata(spi);
+
+ kfree(xp);
+}
+
+static irqreturn_t bcm_qspi_mspi_l2_isr(int irq, void *dev_id)
+{
+ struct bcm_qspi_dev_id *qspi_dev_id = dev_id;
+ struct bcm_qspi *qspi = qspi_dev_id->dev;
+ u32 status = bcm_qspi_read(qspi, MSPI, MSPI_MSPI_STATUS);
+
+ if (status & MSPI_MSPI_STATUS_SPIF) {
+ /* clear interrupt */
+ status &= ~MSPI_MSPI_STATUS_SPIF;
+ bcm_qspi_write(qspi, MSPI, MSPI_MSPI_STATUS, status);
+ complete(&qspi->mspi_done);
+ return IRQ_HANDLED;
+ } else {
+ return IRQ_NONE;
+ }
+}
+
+static const struct bcm_qspi_irq qspi_irq_tab[] = {
+ {
+ .irq_name = "mspi_done",
+ .irq_handler = bcm_qspi_mspi_l2_isr,
+ .mask = INTR_MSPI_DONE_MASK,
+ },
+ {
+ .irq_name = "mspi_halted",
+ .irq_handler = bcm_qspi_mspi_l2_isr,
+ .mask = INTR_MSPI_HALTED_MASK,
+ },
+};
+
+static void bcm_qspi_hw_init(struct bcm_qspi *qspi)
+{
+ struct bcm_qspi_parms parms;
+
+ bcm_qspi_write(qspi, MSPI, MSPI_SPCR1_LSB, 0);
+ bcm_qspi_write(qspi, MSPI, MSPI_SPCR1_MSB, 0);
+ bcm_qspi_write(qspi, MSPI, MSPI_NEWQP, 0);
+ bcm_qspi_write(qspi, MSPI, MSPI_ENDQP, 0);
+ bcm_qspi_write(qspi, MSPI, MSPI_SPCR2, 0x20);
+
+ parms.mode = SPI_MODE_3;
+ parms.bits_per_word = 8;
+ parms.speed_hz = qspi->max_speed_hz;
+ bcm_qspi_hw_set_parms(qspi, &parms);
+}
+
+static void bcm_qspi_hw_uninit(struct bcm_qspi *qspi)
+{
+ bcm_qspi_write(qspi, MSPI, MSPI_SPCR2, 0);
+}
+
+static const struct of_device_id bcm_qspi_of_match[] = {
+ { .compatible = "brcm,spi-bcm-qspi" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, bcm_qspi_of_match);
+
+int bcm_qspi_probe(struct platform_device *pdev,
+ struct bcm_qspi_soc_intc *soc)
+{
+ struct device *dev = &pdev->dev;
+ struct bcm_qspi *qspi;
+ struct spi_master *master;
+ struct resource *res;
+ int irq, ret = 0, num_ints = 0;
+ u32 val;
+ const char *name = NULL;
+ int num_irqs = ARRAY_SIZE(qspi_irq_tab);
+
+ /* We only support device-tree instantiation */
+ if (!dev->of_node)
+ return -ENODEV;
+
+ if (!of_match_node(bcm_qspi_of_match, dev->of_node))
+ return -ENODEV;
+
+ master = spi_alloc_master(dev, sizeof(struct bcm_qspi));
+ if (!master) {
+ dev_err(dev, "error allocating spi_master\n");
+ return -ENOMEM;
+ }
+
+ qspi = spi_master_get_devdata(master);
+ qspi->pdev = pdev;
+ qspi->trans_pos.trans = NULL;
+ qspi->trans_pos.byte = 0;
+ qspi->master = master;
+
+ master->bus_num = -1;
+ master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_RX_DUAL | SPI_RX_QUAD;
+ master->setup = bcm_qspi_setup;
+ master->transfer_one = bcm_qspi_transfer_one;
+ master->cleanup = bcm_qspi_cleanup;
+ master->dev.of_node = dev->of_node;
+ master->num_chipselect = NUM_CHIPSELECT;
+
+ qspi->big_endian = of_device_is_big_endian(dev->of_node);
+
+ if (!of_property_read_u32(dev->of_node, "num-cs", &val))
+ master->num_chipselect = val;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "hif_mspi");
+ if (!res)
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "mspi");
+
+ if (res) {
+ qspi->base[MSPI] = devm_ioremap_resource(dev, res);
+ if (IS_ERR(qspi->base[MSPI])) {
+ ret = PTR_ERR(qspi->base[MSPI]);
+ goto qspi_probe_err;
+ }
+ } else {
+ goto qspi_probe_err;
+ }
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cs_reg");
+ if (res) {
+ qspi->base[CHIP_SELECT] = devm_ioremap_resource(dev, res);
+ if (IS_ERR(qspi->base[CHIP_SELECT])) {
+ ret = PTR_ERR(qspi->base[CHIP_SELECT]);
+ goto qspi_probe_err;
+ }
+ }
+
+ qspi->dev_ids = kcalloc(num_irqs, sizeof(struct bcm_qspi_dev_id),
+ GFP_KERNEL);
+ if (IS_ERR(qspi->dev_ids)) {
+ ret = PTR_ERR(qspi->dev_ids);
+ goto qspi_probe_err;
+ }
+
+ for (val = 0; val < num_irqs; val++) {
+ irq = -1;
+ name = qspi_irq_tab[val].irq_name;
+ irq = platform_get_irq_byname(pdev, name);
+
+ if (irq >= 0) {
+ ret = devm_request_irq(&pdev->dev, irq,
+ qspi_irq_tab[val].irq_handler, 0,
+ name,
+ &qspi->dev_ids[val]);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "IRQ %s not found\n", name);
+ goto qspi_probe_err;
+ }
+
+ qspi->dev_ids[val].dev = qspi;
+ qspi->dev_ids[val].irqp = &qspi_irq_tab[val];
+ num_ints++;
+ dev_dbg(&pdev->dev, "registered IRQ %s %d\n",
+ qspi_irq_tab[val].irq_name,
+ irq);
+ }
+ }
+
+ if (!num_ints) {
+ dev_err(&pdev->dev, "no IRQs registered, cannot init driver\n");
+ goto qspi_probe_err;
+ }
+
+ qspi->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(qspi->clk)) {
+ dev_warn(dev, "unable to get clock\n");
+ goto qspi_probe_err;
+ }
+
+ ret = clk_prepare_enable(qspi->clk);
+ if (ret) {
+ dev_err(dev, "failed to prepare clock\n");
+ goto qspi_probe_err;
+ }
+
+ qspi->base_clk = clk_get_rate(qspi->clk);
+ qspi->max_speed_hz = qspi->base_clk / (QSPI_SPBR_MIN * 2);
+
+ bcm_qspi_hw_init(qspi);
+ init_completion(&qspi->mspi_done);
+ qspi->curr_cs = -1;
+
+ platform_set_drvdata(pdev, qspi);
+ ret = devm_spi_register_master(&pdev->dev, master);
+ if (ret < 0) {
+ dev_err(dev, "can't register master\n");
+ goto qspi_reg_err;
+ }
+
+ return 0;
+
+qspi_reg_err:
+ bcm_qspi_hw_uninit(qspi);
+ clk_disable_unprepare(qspi->clk);
+qspi_probe_err:
+ spi_master_put(master);
+ kfree(qspi->dev_ids);
+ return ret;
+}
+/* probe function to be called by SoC specific platform driver probe */
+EXPORT_SYMBOL_GPL(bcm_qspi_probe);
+
+int bcm_qspi_remove(struct platform_device *pdev)
+{
+ struct bcm_qspi *qspi = platform_get_drvdata(pdev);
+
+ platform_set_drvdata(pdev, NULL);
+ bcm_qspi_hw_uninit(qspi);
+ clk_disable_unprepare(qspi->clk);
+ kfree(qspi->dev_ids);
+ spi_unregister_master(qspi->master);
+
+ return 0;
+}
+/* function to be called by SoC specific platform driver remove() */
+EXPORT_SYMBOL_GPL(bcm_qspi_remove);
+
+#ifdef CONFIG_PM_SLEEP
+static int bcm_qspi_suspend(struct device *dev)
+{
+ struct bcm_qspi *qspi = dev_get_drvdata(dev);
+
+ spi_master_suspend(qspi->master);
+ clk_disable(qspi->clk);
+ bcm_qspi_hw_uninit(qspi);
+
+ return 0;
+};
+
+static int bcm_qspi_resume(struct device *dev)
+{
+ struct bcm_qspi *qspi = dev_get_drvdata(dev);
+ int ret = 0;
+
+ bcm_qspi_hw_init(qspi);
+ bcm_qspi_chip_select(qspi, qspi->curr_cs);
+ ret = clk_enable(qspi->clk);
+ if (!ret)
+ spi_master_resume(qspi->master);
+
+ return ret;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+const struct dev_pm_ops bcm_qspi_pm_ops = {
+ .suspend = bcm_qspi_suspend,
+ .resume = bcm_qspi_resume,
+};
+/* pm_ops to be called by SoC specific platform driver */
+EXPORT_SYMBOL_GPL(bcm_qspi_pm_ops);
+
+MODULE_AUTHOR("Kamal Dasu");
+MODULE_DESCRIPTION("Broadcom QSPI driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRIVER_NAME);
--- /dev/null
+++ b/drivers/spi/spi-bcm-qspi.h
@@ -0,0 +1,63 @@
+/*
+ * Copyright 2016 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation (the "GPL").
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License version 2 (GPLv2) for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * version 2 (GPLv2) along with this source code.
+ */
+
+#ifndef __SPI_BCM_QSPI_H__
+#define __SPI_BCM_QSPI_H__
+
+#include <linux/types.h>
+#include <linux/io.h>
+
+/* MSPI Interrupt masks */
+#define INTR_MSPI_HALTED_MASK BIT(6)
+#define INTR_MSPI_DONE_MASK BIT(5)
+
+#define MSPI_INTERRUPTS_ALL \
+ (INTR_MSPI_DONE_MASK | \
+ INTR_MSPI_HALTED_MASK)
+
+struct platform_device;
+struct dev_pm_ops;
+
+struct bcm_qspi_soc_intc;
+
+/* Read controller register*/
+static inline u32 bcm_qspi_readl(bool be, void __iomem *addr)
+{
+ if (be)
+ return ioread32be(addr);
+ else
+ return readl_relaxed(addr);
+}
+
+/* Write controller register*/
+static inline void bcm_qspi_writel(bool be,
+ unsigned int data, void __iomem *addr)
+{
+ if (be)
+ iowrite32be(data, addr);
+ else
+ writel_relaxed(data, addr);
+}
+
+/* The common driver functions to be called by the SoC platform driver */
+int bcm_qspi_probe(struct platform_device *pdev,
+ struct bcm_qspi_soc_intc *soc_intc);
+int bcm_qspi_remove(struct platform_device *pdev);
+
+/* pm_ops used by the SoC platform driver called on PM suspend/resume */
+extern const struct dev_pm_ops bcm_qspi_pm_ops;
+
+#endif /* __SPI_BCM_QSPI_H__ */

84
target/linux/bcm53xx/patches-4.4/083-0002-spi-brcmstb-qspi-Broadcom-settop-platform-driver.patch Normal file
View file

@ -0,0 +1,84 @@
From 44f95d87a6187f5027568bbcdce491713d7de5e5 Mon Sep 17 00:00:00 2001
From: Kamal Dasu <kdasu.kdev@gmail.com>
Date: Wed, 24 Aug 2016 18:04:24 -0400
Subject: [PATCH] spi: brcmstb-qspi: Broadcom settop platform driver
Adding the settop SoC platfrom driver, this driver is compatible
with the settop MSPI+BSPI and MSPI only blocks implemented on the
SoCs. Driver calls the spi-bcm-qspi probe(), remove() and pm_ops.
Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/spi/Makefile | 2 +-
drivers/spi/spi-brcmstb-qspi.c | 53 ++++++++++++++++++++++++++++++++++++++++++
2 files changed, 54 insertions(+), 1 deletion(-)
create mode 100644 drivers/spi/spi-brcmstb-qspi.c
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -19,7 +19,7 @@ obj-$(CONFIG_SPI_BCM2835AUX) += spi-bcm
obj-$(CONFIG_SPI_BCM53XX) += spi-bcm53xx.o
obj-$(CONFIG_SPI_BCM63XX) += spi-bcm63xx.o
obj-$(CONFIG_SPI_BCM63XX_HSSPI) += spi-bcm63xx-hsspi.o
-obj-$(CONFIG_SPI_BCM_QSPI) += spi-bcm-qspi.o
+obj-$(CONFIG_SPI_BCM_QSPI) += spi-brcmstb-qspi.o spi-bcm-qspi.o
obj-$(CONFIG_SPI_BFIN5XX) += spi-bfin5xx.o
obj-$(CONFIG_SPI_ADI_V3) += spi-adi-v3.o
obj-$(CONFIG_SPI_BFIN_SPORT) += spi-bfin-sport.o
--- /dev/null
+++ b/drivers/spi/spi-brcmstb-qspi.c
@@ -0,0 +1,53 @@
+/*
+ * Copyright 2016 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation (the "GPL").
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License version 2 (GPLv2) for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * version 2 (GPLv2) along with this source code.
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include "spi-bcm-qspi.h"
+
+static const struct of_device_id brcmstb_qspi_of_match[] = {
+ { .compatible = "brcm,spi-brcmstb-qspi" },
+ { .compatible = "brcm,spi-brcmstb-mspi" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, brcmstb_qspi_of_match);
+
+static int brcmstb_qspi_probe(struct platform_device *pdev)
+{
+ return bcm_qspi_probe(pdev, NULL);
+}
+
+static int brcmstb_qspi_remove(struct platform_device *pdev)
+{
+ return bcm_qspi_remove(pdev);
+}
+
+static struct platform_driver brcmstb_qspi_driver = {
+ .probe = brcmstb_qspi_probe,
+ .remove = brcmstb_qspi_remove,
+ .driver = {
+ .name = "brcmstb_qspi",
+ .pm = &bcm_qspi_pm_ops,
+ .of_match_table = brcmstb_qspi_of_match,
+ }
+};
+module_platform_driver(brcmstb_qspi_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Kamal Dasu");
+MODULE_DESCRIPTION("Broadcom SPI driver for settop SoC");

780
target/linux/bcm53xx/patches-4.4/083-0003-spi-bcm-qspi-Add-BSPI-spi-nor-flash-controller-drive.patch Normal file
View file

@ -0,0 +1,780 @@
From 4e3b2d236fe00f0e0b6c45dcb3cc7d84c2316424 Mon Sep 17 00:00:00 2001
From: Kamal Dasu <kdasu.kdev@gmail.com>
Date: Wed, 24 Aug 2016 18:04:25 -0400
Subject: [PATCH] spi: bcm-qspi: Add BSPI spi-nor flash controller driver
This change implements BSPI driver for Broadcom BRCMSTB, NS2,
NSP SoCs works in combination with the MSPI controller driver
and implements flash read acceleration and implements the
spi_flash_read() method. Both MSPI and BSPI controllers are
needed to access spi-nor flash.
Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/spi/spi-bcm-qspi.c | 603 ++++++++++++++++++++++++++++++++++++++++++++-
drivers/spi/spi-bcm-qspi.h | 20 ++
2 files changed, 620 insertions(+), 3 deletions(-)
--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -38,6 +38,60 @@
#define DRIVER_NAME "bcm_qspi"
+
+/* BSPI register offsets */
+#define BSPI_REVISION_ID 0x000
+#define BSPI_SCRATCH 0x004
+#define BSPI_MAST_N_BOOT_CTRL 0x008
+#define BSPI_BUSY_STATUS 0x00c
+#define BSPI_INTR_STATUS 0x010
+#define BSPI_B0_STATUS 0x014
+#define BSPI_B0_CTRL 0x018
+#define BSPI_B1_STATUS 0x01c
+#define BSPI_B1_CTRL 0x020
+#define BSPI_STRAP_OVERRIDE_CTRL 0x024
+#define BSPI_FLEX_MODE_ENABLE 0x028
+#define BSPI_BITS_PER_CYCLE 0x02c
+#define BSPI_BITS_PER_PHASE 0x030
+#define BSPI_CMD_AND_MODE_BYTE 0x034
+#define BSPI_BSPI_FLASH_UPPER_ADDR_BYTE 0x038
+#define BSPI_BSPI_XOR_VALUE 0x03c
+#define BSPI_BSPI_XOR_ENABLE 0x040
+#define BSPI_BSPI_PIO_MODE_ENABLE 0x044
+#define BSPI_BSPI_PIO_IODIR 0x048
+#define BSPI_BSPI_PIO_DATA 0x04c
+
+/* RAF register offsets */
+#define BSPI_RAF_START_ADDR 0x100
+#define BSPI_RAF_NUM_WORDS 0x104
+#define BSPI_RAF_CTRL 0x108
+#define BSPI_RAF_FULLNESS 0x10c
+#define BSPI_RAF_WATERMARK 0x110
+#define BSPI_RAF_STATUS 0x114
+#define BSPI_RAF_READ_DATA 0x118
+#define BSPI_RAF_WORD_CNT 0x11c
+#define BSPI_RAF_CURR_ADDR 0x120
+
+/* Override mode masks */
+#define BSPI_STRAP_OVERRIDE_CTRL_OVERRIDE BIT(0)
+#define BSPI_STRAP_OVERRIDE_CTRL_DATA_DUAL BIT(1)
+#define BSPI_STRAP_OVERRIDE_CTRL_ADDR_4BYTE BIT(2)
+#define BSPI_STRAP_OVERRIDE_CTRL_DATA_QUAD BIT(3)
+#define BSPI_STRAP_OVERRIDE_CTRL_ENDAIN_MODE BIT(4)
+
+#define BSPI_ADDRLEN_3BYTES 3
+#define BSPI_ADDRLEN_4BYTES 4
+
+#define BSPI_RAF_STATUS_FIFO_EMPTY_MASK BIT(1)
+
+#define BSPI_RAF_CTRL_START_MASK BIT(0)
+#define BSPI_RAF_CTRL_CLEAR_MASK BIT(1)
+
+#define BSPI_BPP_MODE_SELECT_MASK BIT(8)
+#define BSPI_BPP_ADDR_SELECT_MASK BIT(16)
+
+#define BSPI_READ_LENGTH 256
+
/* MSPI register offsets */
#define MSPI_SPCR0_LSB 0x000
#define MSPI_SPCR0_MSB 0x004
@@ -108,8 +162,16 @@ struct bcm_qspi_parms {
u8 bits_per_word;
};
+struct bcm_xfer_mode {
+ bool flex_mode;
+ unsigned int width;
+ unsigned int addrlen;
+ unsigned int hp;
+};
+
enum base_type {
MSPI,
+ BSPI,
CHIP_SELECT,
BASEMAX,
};
@@ -140,13 +202,28 @@ struct bcm_qspi {
struct bcm_qspi_parms last_parms;
struct qspi_trans trans_pos;
int curr_cs;
+ int bspi_maj_rev;
+ int bspi_min_rev;
+ int bspi_enabled;
+ struct spi_flash_read_message *bspi_rf_msg;
+ u32 bspi_rf_msg_idx;
+ u32 bspi_rf_msg_len;
+ u32 bspi_rf_msg_status;
+ struct bcm_xfer_mode xfer_mode;
u32 s3_strap_override_ctrl;
+ bool bspi_mode;
bool big_endian;
int num_irqs;
struct bcm_qspi_dev_id *dev_ids;
struct completion mspi_done;
+ struct completion bspi_done;
};
+static inline bool has_bspi(struct bcm_qspi *qspi)
+{
+ return qspi->bspi_mode;
+}
+
/* Read qspi controller register*/
static inline u32 bcm_qspi_read(struct bcm_qspi *qspi, enum base_type type,
unsigned int offset)
@@ -161,6 +238,300 @@ static inline void bcm_qspi_write(struct
bcm_qspi_writel(qspi->big_endian, data, qspi->base[type] + offset);
}
+/* BSPI helpers */
+static int bcm_qspi_bspi_busy_poll(struct bcm_qspi *qspi)
+{
+ int i;
+
+ /* this should normally finish within 10us */
+ for (i = 0; i < 1000; i++) {
+ if (!(bcm_qspi_read(qspi, BSPI, BSPI_BUSY_STATUS) & 1))
+ return 0;
+ udelay(1);
+ }
+ dev_warn(&qspi->pdev->dev, "timeout waiting for !busy_status\n");
+ return -EIO;
+}
+
+static inline bool bcm_qspi_bspi_ver_three(struct bcm_qspi *qspi)
+{
+ if (qspi->bspi_maj_rev < 4)
+ return true;
+ return false;
+}
+
+static void bcm_qspi_bspi_flush_prefetch_buffers(struct bcm_qspi *qspi)
+{
+ bcm_qspi_bspi_busy_poll(qspi);
+ /* Force rising edge for the b0/b1 'flush' field */
+ bcm_qspi_write(qspi, BSPI, BSPI_B0_CTRL, 1);
+ bcm_qspi_write(qspi, BSPI, BSPI_B1_CTRL, 1);
+ bcm_qspi_write(qspi, BSPI, BSPI_B0_CTRL, 0);
+ bcm_qspi_write(qspi, BSPI, BSPI_B1_CTRL, 0);
+}
+
+static int bcm_qspi_bspi_lr_is_fifo_empty(struct bcm_qspi *qspi)
+{
+ return (bcm_qspi_read(qspi, BSPI, BSPI_RAF_STATUS) &
+ BSPI_RAF_STATUS_FIFO_EMPTY_MASK);
+}
+
+static inline u32 bcm_qspi_bspi_lr_read_fifo(struct bcm_qspi *qspi)
+{
+ u32 data = bcm_qspi_read(qspi, BSPI, BSPI_RAF_READ_DATA);
+
+ /* BSPI v3 LR is LE only, convert data to host endianness */
+ if (bcm_qspi_bspi_ver_three(qspi))
+ data = le32_to_cpu(data);
+
+ return data;
+}
+
+static inline void bcm_qspi_bspi_lr_start(struct bcm_qspi *qspi)
+{
+ bcm_qspi_bspi_busy_poll(qspi);
+ bcm_qspi_write(qspi, BSPI, BSPI_RAF_CTRL,
+ BSPI_RAF_CTRL_START_MASK);
+}
+
+static inline void bcm_qspi_bspi_lr_clear(struct bcm_qspi *qspi)
+{
+ bcm_qspi_write(qspi, BSPI, BSPI_RAF_CTRL,
+ BSPI_RAF_CTRL_CLEAR_MASK);
+ bcm_qspi_bspi_flush_prefetch_buffers(qspi);
+}
+
+static void bcm_qspi_bspi_lr_data_read(struct bcm_qspi *qspi)
+{
+ u32 *buf = (u32 *)qspi->bspi_rf_msg->buf;
+ u32 data = 0;
+
+ dev_dbg(&qspi->pdev->dev, "xfer %p rx %p rxlen %d\n", qspi->bspi_rf_msg,
+ qspi->bspi_rf_msg->buf, qspi->bspi_rf_msg_len);
+ while (!bcm_qspi_bspi_lr_is_fifo_empty(qspi)) {
+ data = bcm_qspi_bspi_lr_read_fifo(qspi);
+ if (likely(qspi->bspi_rf_msg_len >= 4) &&
+ IS_ALIGNED((uintptr_t)buf, 4)) {
+ buf[qspi->bspi_rf_msg_idx++] = data;
+ qspi->bspi_rf_msg_len -= 4;
+ } else {
+ /* Read out remaining bytes, make sure*/
+ u8 *cbuf = (u8 *)&buf[qspi->bspi_rf_msg_idx];
+
+ data = cpu_to_le32(data);
+ while (qspi->bspi_rf_msg_len) {
+ *cbuf++ = (u8)data;
+ data >>= 8;
+ qspi->bspi_rf_msg_len--;
+ }
+ }
+ }
+}
+
+static void bcm_qspi_bspi_set_xfer_params(struct bcm_qspi *qspi, u8 cmd_byte,
+ int bpp, int bpc, int flex_mode)
+{
+ bcm_qspi_write(qspi, BSPI, BSPI_FLEX_MODE_ENABLE, 0);
+ bcm_qspi_write(qspi, BSPI, BSPI_BITS_PER_CYCLE, bpc);
+ bcm_qspi_write(qspi, BSPI, BSPI_BITS_PER_PHASE, bpp);
+ bcm_qspi_write(qspi, BSPI, BSPI_CMD_AND_MODE_BYTE, cmd_byte);
+ bcm_qspi_write(qspi, BSPI, BSPI_FLEX_MODE_ENABLE, flex_mode);
+}
+
+static int bcm_qspi_bspi_set_flex_mode(struct bcm_qspi *qspi, int width,
+ int addrlen, int hp)
+{
+ int bpc = 0, bpp = 0;
+ u8 command = SPINOR_OP_READ_FAST;
+ int flex_mode = 1, rv = 0;
+ bool spans_4byte = false;
+
+ dev_dbg(&qspi->pdev->dev, "set flex mode w %x addrlen %x hp %d\n",
+ width, addrlen, hp);
+
+ if (addrlen == BSPI_ADDRLEN_4BYTES) {
+ bpp = BSPI_BPP_ADDR_SELECT_MASK;
+ spans_4byte = true;
+ }
+
+ bpp |= 8;
+
+ switch (width) {
+ case SPI_NBITS_SINGLE:
+ if (addrlen == BSPI_ADDRLEN_3BYTES)
+ /* default mode, does not need flex_cmd */
+ flex_mode = 0;
+ else
+ command = SPINOR_OP_READ4_FAST;
+ break;
+ case SPI_NBITS_DUAL:
+ bpc = 0x00000001;
+ if (hp) {
+ bpc |= 0x00010100; /* address and mode are 2-bit */
+ bpp = BSPI_BPP_MODE_SELECT_MASK;
+ command = OPCODE_DIOR;
+ if (spans_4byte)
+ command = OPCODE_DIOR_4B;
+ } else {
+ command = SPINOR_OP_READ_1_1_2;
+ if (spans_4byte)
+ command = SPINOR_OP_READ4_1_1_2;
+ }
+ break;
+ case SPI_NBITS_QUAD:
+ bpc = 0x00000002;
+ if (hp) {
+ bpc |= 0x00020200; /* address and mode are 4-bit */
+ bpp = 4; /* dummy cycles */
+ bpp |= BSPI_BPP_ADDR_SELECT_MASK;
+ command = OPCODE_QIOR;
+ if (spans_4byte)
+ command = OPCODE_QIOR_4B;
+ } else {
+ command = SPINOR_OP_READ_1_1_4;
+ if (spans_4byte)
+ command = SPINOR_OP_READ4_1_1_4;
+ }
+ break;
+ default:
+ rv = -EINVAL;
+ break;
+ }
+
+ if (rv == 0)
+ bcm_qspi_bspi_set_xfer_params(qspi, command, bpp, bpc,
+ flex_mode);
+
+ return rv;
+}
+
+static int bcm_qspi_bspi_set_override(struct bcm_qspi *qspi, int width,
+ int addrlen, int hp)
+{
+ u32 data = bcm_qspi_read(qspi, BSPI, BSPI_STRAP_OVERRIDE_CTRL);
+
+ dev_dbg(&qspi->pdev->dev, "set override mode w %x addrlen %x hp %d\n",
+ width, addrlen, hp);
+
+ switch (width) {
+ case SPI_NBITS_SINGLE:
+ /* clear quad/dual mode */
+ data &= ~(BSPI_STRAP_OVERRIDE_CTRL_DATA_QUAD |
+ BSPI_STRAP_OVERRIDE_CTRL_DATA_DUAL);
+ break;
+
+ case SPI_NBITS_QUAD:
+ /* clear dual mode and set quad mode */
+ data &= ~BSPI_STRAP_OVERRIDE_CTRL_DATA_DUAL;
+ data |= BSPI_STRAP_OVERRIDE_CTRL_DATA_QUAD;
+ break;
+ case SPI_NBITS_DUAL:
+ /* clear quad mode set dual mode */
+ data &= ~BSPI_STRAP_OVERRIDE_CTRL_DATA_QUAD;
+ data |= BSPI_STRAP_OVERRIDE_CTRL_DATA_DUAL;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (addrlen == BSPI_ADDRLEN_4BYTES)
+ /* set 4byte mode*/
+ data |= BSPI_STRAP_OVERRIDE_CTRL_ADDR_4BYTE;
+ else
+ /* clear 4 byte mode */
+ data &= ~BSPI_STRAP_OVERRIDE_CTRL_ADDR_4BYTE;
+
+ /* set the override mode */
+ data |= BSPI_STRAP_OVERRIDE_CTRL_OVERRIDE;
+ bcm_qspi_write(qspi, BSPI, BSPI_STRAP_OVERRIDE_CTRL, data);
+ bcm_qspi_bspi_set_xfer_params(qspi, SPINOR_OP_READ_FAST, 0, 0, 0);
+
+ return 0;
+}
+
+static int bcm_qspi_bspi_set_mode(struct bcm_qspi *qspi,
+ int width, int addrlen, int hp)
+{
+ int error = 0;
+
+ /* default mode */
+ qspi->xfer_mode.flex_mode = true;
+
+ if (!bcm_qspi_bspi_ver_three(qspi)) {
+ u32 val, mask;
+
+ val = bcm_qspi_read(qspi, BSPI, BSPI_STRAP_OVERRIDE_CTRL);
+ mask = BSPI_STRAP_OVERRIDE_CTRL_OVERRIDE;
+ if (val & mask || qspi->s3_strap_override_ctrl & mask) {
+ qspi->xfer_mode.flex_mode = false;
+ bcm_qspi_write(qspi, BSPI, BSPI_FLEX_MODE_ENABLE,
+ 0);
+
+ if ((val | qspi->s3_strap_override_ctrl) &
+ BSPI_STRAP_OVERRIDE_CTRL_DATA_DUAL)
+ width = SPI_NBITS_DUAL;
+ else if ((val | qspi->s3_strap_override_ctrl) &
+ BSPI_STRAP_OVERRIDE_CTRL_DATA_QUAD)
+ width = SPI_NBITS_QUAD;
+
+ error = bcm_qspi_bspi_set_override(qspi, width, addrlen,
+ hp);
+ }
+ }
+
+ if (qspi->xfer_mode.flex_mode)
+ error = bcm_qspi_bspi_set_flex_mode(qspi, width, addrlen, hp);
+
+ if (error) {
+ dev_warn(&qspi->pdev->dev,
+ "INVALID COMBINATION: width=%d addrlen=%d hp=%d\n",
+ width, addrlen, hp);
+ } else if (qspi->xfer_mode.width != width ||
+ qspi->xfer_mode.addrlen != addrlen ||
+ qspi->xfer_mode.hp != hp) {
+ qspi->xfer_mode.width = width;
+ qspi->xfer_mode.addrlen = addrlen;
+ qspi->xfer_mode.hp = hp;
+ dev_dbg(&qspi->pdev->dev,
+ "cs:%d %d-lane output, %d-byte address%s\n",
+ qspi->curr_cs,
+ qspi->xfer_mode.width,
+ qspi->xfer_mode.addrlen,
+ qspi->xfer_mode.hp != -1 ? ", hp mode" : "");
+ }
+
+ return error;
+}
+
+static void bcm_qspi_enable_bspi(struct bcm_qspi *qspi)
+{
+ if (!has_bspi(qspi) || (qspi->bspi_enabled))
+ return;
+
+ qspi->bspi_enabled = 1;
+ if ((bcm_qspi_read(qspi, BSPI, BSPI_MAST_N_BOOT_CTRL) & 1) == 0)
+ return;
+
+ bcm_qspi_bspi_flush_prefetch_buffers(qspi);
+ udelay(1);
+ bcm_qspi_write(qspi, BSPI, BSPI_MAST_N_BOOT_CTRL, 0);
+ udelay(1);
+}
+
+static void bcm_qspi_disable_bspi(struct bcm_qspi *qspi)
+{
+ if (!has_bspi(qspi) || (!qspi->bspi_enabled))
+ return;
+
+ qspi->bspi_enabled = 0;
+ if ((bcm_qspi_read(qspi, BSPI, BSPI_MAST_N_BOOT_CTRL) & 1))
+ return;
+
+ bcm_qspi_bspi_busy_poll(qspi);
+ bcm_qspi_write(qspi, BSPI, BSPI_MAST_N_BOOT_CTRL, 1);
+ udelay(1);
+}
+
static void bcm_qspi_chip_select(struct bcm_qspi *qspi, int cs)
{
u32 data = 0;
@@ -298,6 +669,8 @@ static void read_from_hw(struct bcm_qspi
struct qspi_trans tp;
int slot;
+ bcm_qspi_disable_bspi(qspi);
+
if (slots > MSPI_NUM_CDRAM) {
/* should never happen */
dev_err(&qspi->pdev->dev, "%s: too many slots!\n", __func__);
@@ -368,6 +741,7 @@ static int write_to_hw(struct bcm_qspi *
int slot = 0, tstatus = 0;
u32 mspi_cdram = 0;
+ bcm_qspi_disable_bspi(qspi);
tp = qspi->trans_pos;
bcm_qspi_update_parms(qspi, spi, tp.trans);
@@ -414,6 +788,9 @@ static int write_to_hw(struct bcm_qspi *
write_cdram_slot(qspi, slot - 1, mspi_cdram);
}
+ if (has_bspi(qspi))
+ bcm_qspi_write(qspi, MSPI, MSPI_WRITE_LOCK, 1);
+
/* Must flush previous writes before starting MSPI operation */
mb();
/* Set cont | spe | spifie */
@@ -423,6 +800,118 @@ done:
return slot;
}
+static int bcm_qspi_bspi_flash_read(struct spi_device *spi,
+ struct spi_flash_read_message *msg)
+{
+ struct bcm_qspi *qspi = spi_master_get_devdata(spi->master);
+ u32 addr = 0, len, len_words;
+ int ret = 0;
+ unsigned long timeo = msecs_to_jiffies(100);
+
+ if (bcm_qspi_bspi_ver_three(qspi))
+ if (msg->addr_width == BSPI_ADDRLEN_4BYTES)
+ return -EIO;
+
+ bcm_qspi_chip_select(qspi, spi->chip_select);
+ bcm_qspi_write(qspi, MSPI, MSPI_WRITE_LOCK, 0);
+
+ /*
+ * when using flex mode mode we need to send
+ * the upper address byte to bspi
+ */
+ if (bcm_qspi_bspi_ver_three(qspi) == false) {
+ addr = msg->from & 0xff000000;
+ bcm_qspi_write(qspi, BSPI,
+ BSPI_BSPI_FLASH_UPPER_ADDR_BYTE, addr);
+ }
+
+ if (!qspi->xfer_mode.flex_mode)
+ addr = msg->from;
+ else
+ addr = msg->from & 0x00ffffff;
+
+ /* set BSPI RAF buffer max read length */
+ len = msg->len;
+ if (len > BSPI_READ_LENGTH)
+ len = BSPI_READ_LENGTH;
+
+ if (bcm_qspi_bspi_ver_three(qspi) == true)
+ addr = (addr + 0xc00000) & 0xffffff;
+
+ reinit_completion(&qspi->bspi_done);
+ bcm_qspi_enable_bspi(qspi);
+ len_words = (len + 3) >> 2;
+ qspi->bspi_rf_msg = msg;
+ qspi->bspi_rf_msg_status = 0;
+ qspi->bspi_rf_msg_idx = 0;
+ qspi->bspi_rf_msg_len = len;
+ dev_dbg(&qspi->pdev->dev, "bspi xfr addr 0x%x len 0x%x", addr, len);
+
+ bcm_qspi_write(qspi, BSPI, BSPI_RAF_START_ADDR, addr);
+ bcm_qspi_write(qspi, BSPI, BSPI_RAF_NUM_WORDS, len_words);
+ bcm_qspi_write(qspi, BSPI, BSPI_RAF_WATERMARK, 0);
+
+ /* Must flush previous writes before starting BSPI operation */
+ mb();
+
+ bcm_qspi_bspi_lr_start(qspi);
+ if (!wait_for_completion_timeout(&qspi->bspi_done, timeo)) {
+ dev_err(&qspi->pdev->dev, "timeout waiting for BSPI\n");
+ ret = -ETIMEDOUT;
+ } else {
+ /* set the return length for the caller */
+ msg->retlen = len;
+ }
+
+ return ret;
+}
+
+static int bcm_qspi_flash_read(struct spi_device *spi,
+ struct spi_flash_read_message *msg)
+{
+ struct bcm_qspi *qspi = spi_master_get_devdata(spi->master);
+ int ret = 0;
+ bool mspi_read = false;
+ u32 io_width, addrlen, addr, len;
+ u_char *buf;
+
+ buf = msg->buf;
+ addr = msg->from;
+ len = msg->len;
+
+ if (bcm_qspi_bspi_ver_three(qspi) == true) {
+ /*
+ * The address coming into this function is a raw flash offset.
+ * But for BSPI <= V3, we need to convert it to a remapped BSPI
+ * address. If it crosses a 4MB boundary, just revert back to
+ * using MSPI.
+ */
+ addr = (addr + 0xc00000) & 0xffffff;
+
+ if ((~ADDR_4MB_MASK & addr) ^
+ (~ADDR_4MB_MASK & (addr + len - 1)))
+ mspi_read = true;
+ }
+
+ /* non-aligned and very short transfers are handled by MSPI */
+ if (!IS_ALIGNED((uintptr_t)addr, 4) || !IS_ALIGNED((uintptr_t)buf, 4) ||
+ len < 4)
+ mspi_read = true;
+
+ if (mspi_read)
+ /* this will make the m25p80 read to fallback to mspi read */
+ return -EAGAIN;
+
+ io_width = msg->data_nbits ? msg->data_nbits : SPI_NBITS_SINGLE;
+ addrlen = msg->addr_width;
+ ret = bcm_qspi_bspi_set_mode(qspi, io_width, addrlen, -1);
+
+ if (!ret)
+ ret = bcm_qspi_bspi_flash_read(spi, msg);
+
+ return ret;
+}
+
static int bcm_qspi_transfer_one(struct spi_master *master,
struct spi_device *spi,
struct spi_transfer *trans)
@@ -469,13 +958,76 @@ static irqreturn_t bcm_qspi_mspi_l2_isr(
bcm_qspi_write(qspi, MSPI, MSPI_MSPI_STATUS, status);
complete(&qspi->mspi_done);
return IRQ_HANDLED;
- } else {
- return IRQ_NONE;
}
+
+ return IRQ_NONE;
+}
+
+static irqreturn_t bcm_qspi_bspi_lr_l2_isr(int irq, void *dev_id)
+{
+ struct bcm_qspi_dev_id *qspi_dev_id = dev_id;
+ struct bcm_qspi *qspi = qspi_dev_id->dev;
+ u32 status;
+
+ if (qspi->bspi_enabled && qspi->bspi_rf_msg) {
+ bcm_qspi_bspi_lr_data_read(qspi);
+ if (qspi->bspi_rf_msg_len == 0) {
+ qspi->bspi_rf_msg = NULL;
+ if (qspi->bspi_rf_msg_status)
+ bcm_qspi_bspi_lr_clear(qspi);
+ else
+ bcm_qspi_bspi_flush_prefetch_buffers(qspi);
+ }
+ }
+
+ status = (qspi_dev_id->irqp->mask & INTR_BSPI_LR_SESSION_DONE_MASK);
+ if (qspi->bspi_enabled && status && qspi->bspi_rf_msg_len == 0)
+ complete(&qspi->bspi_done);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t bcm_qspi_bspi_lr_err_l2_isr(int irq, void *dev_id)
+{
+ struct bcm_qspi_dev_id *qspi_dev_id = dev_id;
+ struct bcm_qspi *qspi = qspi_dev_id->dev;
+
+ dev_err(&qspi->pdev->dev, "BSPI INT error\n");
+ qspi->bspi_rf_msg_status = -EIO;
+ complete(&qspi->bspi_done);
+ return IRQ_HANDLED;
}
static const struct bcm_qspi_irq qspi_irq_tab[] = {
{
+ .irq_name = "spi_lr_fullness_reached",
+ .irq_handler = bcm_qspi_bspi_lr_l2_isr,
+ .mask = INTR_BSPI_LR_FULLNESS_REACHED_MASK,
+ },
+ {
+ .irq_name = "spi_lr_session_aborted",
+ .irq_handler = bcm_qspi_bspi_lr_err_l2_isr,
+ .mask = INTR_BSPI_LR_SESSION_ABORTED_MASK,
+ },
+ {
+ .irq_name = "spi_lr_impatient",
+ .irq_handler = bcm_qspi_bspi_lr_err_l2_isr,
+ .mask = INTR_BSPI_LR_IMPATIENT_MASK,
+ },
+ {
+ .irq_name = "spi_lr_session_done",
+ .irq_handler = bcm_qspi_bspi_lr_l2_isr,
+ .mask = INTR_BSPI_LR_SESSION_DONE_MASK,
+ },
+#ifdef QSPI_INT_DEBUG
+ /* this interrupt is for debug purposes only, dont request irq */
+ {
+ .irq_name = "spi_lr_overread",
+ .irq_handler = bcm_qspi_bspi_lr_err_l2_isr,
+ .mask = INTR_BSPI_LR_OVERREAD_MASK,
+ },
+#endif
+ {
.irq_name = "mspi_done",
.irq_handler = bcm_qspi_mspi_l2_isr,
.mask = INTR_MSPI_DONE_MASK,
@@ -487,6 +1039,24 @@ static const struct bcm_qspi_irq qspi_ir
},
};
+static void bcm_qspi_bspi_init(struct bcm_qspi *qspi)
+{
+ u32 val = 0;
+
+ val = bcm_qspi_read(qspi, BSPI, BSPI_REVISION_ID);
+ qspi->bspi_maj_rev = (val >> 8) & 0xff;
+ qspi->bspi_min_rev = val & 0xff;
+ if (!(bcm_qspi_bspi_ver_three(qspi))) {
+ /* Force mapping of BSPI address -> flash offset */
+ bcm_qspi_write(qspi, BSPI, BSPI_BSPI_XOR_VALUE, 0);
+ bcm_qspi_write(qspi, BSPI, BSPI_BSPI_XOR_ENABLE, 1);
+ }
+ qspi->bspi_enabled = 1;
+ bcm_qspi_disable_bspi(qspi);
+ bcm_qspi_write(qspi, BSPI, BSPI_B0_CTRL, 0);
+ bcm_qspi_write(qspi, BSPI, BSPI_B1_CTRL, 0);
+}
+
static void bcm_qspi_hw_init(struct bcm_qspi *qspi)
{
struct bcm_qspi_parms parms;
@@ -501,11 +1071,17 @@ static void bcm_qspi_hw_init(struct bcm_
parms.bits_per_word = 8;
parms.speed_hz = qspi->max_speed_hz;
bcm_qspi_hw_set_parms(qspi, &parms);
+
+ if (has_bspi(qspi))
+ bcm_qspi_bspi_init(qspi);
}
static void bcm_qspi_hw_uninit(struct bcm_qspi *qspi)
{
bcm_qspi_write(qspi, MSPI, MSPI_SPCR2, 0);
+ if (has_bspi(qspi))
+ bcm_qspi_write(qspi, MSPI, MSPI_WRITE_LOCK, 0);
+
}
static const struct of_device_id bcm_qspi_of_match[] = {
@@ -515,7 +1091,7 @@ static const struct of_device_id bcm_qsp
MODULE_DEVICE_TABLE(of, bcm_qspi_of_match);
int bcm_qspi_probe(struct platform_device *pdev,
- struct bcm_qspi_soc_intc *soc)
+ struct bcm_qspi_soc_intc *soc_intc)
{
struct device *dev = &pdev->dev;
struct bcm_qspi *qspi;
@@ -549,6 +1125,7 @@ int bcm_qspi_probe(struct platform_devic
master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_RX_DUAL | SPI_RX_QUAD;
master->setup = bcm_qspi_setup;
master->transfer_one = bcm_qspi_transfer_one;
+ master->spi_flash_read = bcm_qspi_flash_read;
master->cleanup = bcm_qspi_cleanup;
master->dev.of_node = dev->of_node;
master->num_chipselect = NUM_CHIPSELECT;
@@ -573,6 +1150,20 @@ int bcm_qspi_probe(struct platform_devic
goto qspi_probe_err;
}
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "bspi");
+ if (res) {
+ qspi->base[BSPI] = devm_ioremap_resource(dev, res);
+ if (IS_ERR(qspi->base[BSPI])) {
+ ret = PTR_ERR(qspi->base[BSPI]);
+ goto qspi_probe_err;
+ }
+ qspi->bspi_mode = true;
+ } else {
+ qspi->bspi_mode = false;
+ }
+
+ dev_info(dev, "using %smspi mode\n", qspi->bspi_mode ? "bspi-" : "");
+
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cs_reg");
if (res) {
qspi->base[CHIP_SELECT] = devm_ioremap_resource(dev, res);
@@ -635,9 +1226,15 @@ int bcm_qspi_probe(struct platform_devic
bcm_qspi_hw_init(qspi);
init_completion(&qspi->mspi_done);
+ init_completion(&qspi->bspi_done);
qspi->curr_cs = -1;
platform_set_drvdata(pdev, qspi);
+
+ qspi->xfer_mode.width = -1;
+ qspi->xfer_mode.addrlen = -1;
+ qspi->xfer_mode.hp = -1;
+
ret = devm_spi_register_master(&pdev->dev, master);
if (ret < 0) {
dev_err(dev, "can't register master\n");
--- a/drivers/spi/spi-bcm-qspi.h
+++ b/drivers/spi/spi-bcm-qspi.h
@@ -20,6 +20,26 @@
#include <linux/types.h>
#include <linux/io.h>
+/* BSPI interrupt masks */
+#define INTR_BSPI_LR_OVERREAD_MASK BIT(4)
+#define INTR_BSPI_LR_SESSION_DONE_MASK BIT(3)
+#define INTR_BSPI_LR_IMPATIENT_MASK BIT(2)
+#define INTR_BSPI_LR_SESSION_ABORTED_MASK BIT(1)
+#define INTR_BSPI_LR_FULLNESS_REACHED_MASK BIT(0)
+
+#define BSPI_LR_INTERRUPTS_DATA \
+ (INTR_BSPI_LR_SESSION_DONE_MASK | \
+ INTR_BSPI_LR_FULLNESS_REACHED_MASK)
+
+#define BSPI_LR_INTERRUPTS_ERROR \
+ (INTR_BSPI_LR_OVERREAD_MASK | \
+ INTR_BSPI_LR_IMPATIENT_MASK | \
+ INTR_BSPI_LR_SESSION_ABORTED_MASK)
+
+#define BSPI_LR_INTERRUPTS_ALL \
+ (BSPI_LR_INTERRUPTS_ERROR | \
+ BSPI_LR_INTERRUPTS_DATA)
+
/* MSPI Interrupt masks */
#define INTR_MSPI_HALTED_MASK BIT(6)
#define INTR_MSPI_DONE_MASK BIT(5)

27
target/linux/bcm53xx/patches-4.4/083-0004-spi-bcm-qspi-don-t-include-linux-mtd-cfi.h.patch Normal file
View file

@ -0,0 +1,27 @@
From c0a75d072a501effd66d3392ada8d3f4283b87ef Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Thu, 15 Sep 2016 17:40:15 +0200
Subject: [PATCH] spi: bcm-qspi: don't include linux/mtd/cfi.h
The header isn't actually needed here, but including it leads
to a build warning when CONFIG_MTD is disabled:
include/linux/mtd/cfi.h:76:2: #warning No CONFIG_MTD_CFI_Ix selected. No NOR chip support can work. [-Werror=cpp]
Fixes: fa236a7ef240 (spi: bcm-qspi: Add Broadcom MSPI driver)
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/spi/spi-bcm-qspi.c | 1 -
1 file changed, 1 deletion(-)
--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -25,7 +25,6 @@
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/mtd/cfi.h>
#include <linux/mtd/spi-nor.h>
#include <linux/of.h>
#include <linux/of_irq.h>

63
target/linux/bcm53xx/patches-4.4/083-0005-spi-bcm-qspi-fix-suspend-resume-ifdef.patch Normal file
View file

@ -0,0 +1,63 @@
From a0319f8b12c0fb9800da61f4cba9bd6fd80e37a4 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Thu, 15 Sep 2016 17:46:53 +0200
Subject: [PATCH] spi: bcm-qspi: fix suspend/resume #ifdef
The two power management functions are define inside of an #ifdef
but referenced unconditionally, which is obviously broken when
CONFIG_PM_SLEEP is not set:
drivers/spi/spi-bcm-qspi.c:1300:13: error: 'bcm_qspi_suspend' undeclared here (not in a function)
drivers/spi/spi-bcm-qspi.c:1301:13: error: 'bcm_qspi_resume' undeclared here (not in a function)
This replaces the #ifdef with a __maybe_unused annotation that lets
the compiler figure out whether to drop the functions itself,
and uses SIMPLE_DEV_PM_OPS() to refer to the functions.
This will also fill the freeze/thaw/poweroff/restore callback
pointers in addition to suspend/resume, but as far as I can tell,
this is what we want.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: fa236a7ef240 ("spi: bcm-qspi: Add Broadcom MSPI driver")
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/spi/spi-bcm-qspi.c | 12 ++++--------
1 file changed, 4 insertions(+), 8 deletions(-)
--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -1268,8 +1268,7 @@ int bcm_qspi_remove(struct platform_devi
/* function to be called by SoC specific platform driver remove() */
EXPORT_SYMBOL_GPL(bcm_qspi_remove);
-#ifdef CONFIG_PM_SLEEP
-static int bcm_qspi_suspend(struct device *dev)
+static int __maybe_unused bcm_qspi_suspend(struct device *dev)
{
struct bcm_qspi *qspi = dev_get_drvdata(dev);
@@ -1280,7 +1279,7 @@ static int bcm_qspi_suspend(struct devic
return 0;
};
-static int bcm_qspi_resume(struct device *dev)
+static int __maybe_unused bcm_qspi_resume(struct device *dev)
{
struct bcm_qspi *qspi = dev_get_drvdata(dev);
int ret = 0;
@@ -1293,12 +1292,9 @@ static int bcm_qspi_resume(struct device
return ret;
}
-#endif /* CONFIG_PM_SLEEP */
-const struct dev_pm_ops bcm_qspi_pm_ops = {
- .suspend = bcm_qspi_suspend,
- .resume = bcm_qspi_resume,
-};
+SIMPLE_DEV_PM_OPS(bcm_qspi_pm_ops, bcm_qspi_suspend, bcm_qspi_resume);
+
/* pm_ops to be called by SoC specific platform driver */
EXPORT_SYMBOL_GPL(bcm_qspi_pm_ops);

29
target/linux/bcm53xx/patches-4.4/083-0006-spi-bcm-qspi-Fix-return-value-check-in-bcm_qspi_prob.patch Normal file
View file

@ -0,0 +1,29 @@
From 3bf3eb2b95aaf18eff3080444b24673cda8ff9a2 Mon Sep 17 00:00:00 2001
From: Wei Yongjun <weiyongjun1@huawei.com>
Date: Fri, 16 Sep 2016 13:45:17 +0000
Subject: [PATCH] spi: bcm-qspi: Fix return value check in bcm_qspi_probe()
In case of error, the function kcalloc() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check
should be replaced with NULL test.
Fixes: fa236a7ef240 ("spi: bcm-qspi: Add Broadcom MSPI driver")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/spi/spi-bcm-qspi.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -1174,8 +1174,8 @@ int bcm_qspi_probe(struct platform_devic
qspi->dev_ids = kcalloc(num_irqs, sizeof(struct bcm_qspi_dev_id),
GFP_KERNEL);
- if (IS_ERR(qspi->dev_ids)) {
- ret = PTR_ERR(qspi->dev_ids);
+ if (!qspi->dev_ids) {
+ ret = -ENOMEM;
goto qspi_probe_err;
}

32
target/linux/bcm53xx/patches-4.4/083-0007-spi-bcm-qspi-Fix-error-return-code-in-bcm_qspi_probe.patch Normal file
View file

@ -0,0 +1,32 @@
From 71b8f350a4f03730f3024bfa7dc2414904a21bcb Mon Sep 17 00:00:00 2001
From: Wei Yongjun <weiyongjun1@huawei.com>
Date: Fri, 16 Sep 2016 14:00:19 +0000
Subject: [PATCH] spi: bcm-qspi: Fix error return code in bcm_qspi_probe()
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: fa236a7ef240 ("spi: bcm-qspi: Add Broadcom MSPI driver")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/spi/spi-bcm-qspi.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -1205,12 +1205,14 @@ int bcm_qspi_probe(struct platform_devic
if (!num_ints) {
dev_err(&pdev->dev, "no IRQs registered, cannot init driver\n");
+ ret = -EINVAL;
goto qspi_probe_err;
}
qspi->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(qspi->clk)) {
dev_warn(dev, "unable to get clock\n");
+ ret = PTR_ERR(qspi->clk);
goto qspi_probe_err;
}

452
target/linux/bcm53xx/patches-4.4/083-0008-spi-iproc-qspi-Add-Broadcom-iProc-SoCs-support.patch Normal file
View file

@ -0,0 +1,452 @@
From cc20a38612dbc87dc7396affc9758e3bfbe92340 Mon Sep 17 00:00:00 2001
From: Kamal Dasu <kdasu.kdev@gmail.com>
Date: Wed, 24 Aug 2016 18:04:29 -0400
Subject: [PATCH] spi: iproc-qspi: Add Broadcom iProc SoCs support
This spi driver uses the common spi-bcm-qspi driver and implements iProc
SoCs specific interrupt controller. The common driver now calls the SoC
handlers when present. Adding support for both muxed l1 and unmuxed interrupt
sources.
Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/spi/Makefile | 2 +-
drivers/spi/spi-bcm-qspi.c | 97 ++++++++++++++++++++++++-
drivers/spi/spi-bcm-qspi.h | 34 ++++++++-
drivers/spi/spi-iproc-qspi.c | 163 +++++++++++++++++++++++++++++++++++++++++++
4 files changed, 291 insertions(+), 5 deletions(-)
create mode 100644 drivers/spi/spi-iproc-qspi.c
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -19,7 +19,7 @@ obj-$(CONFIG_SPI_BCM2835AUX) += spi-bcm
obj-$(CONFIG_SPI_BCM53XX) += spi-bcm53xx.o
obj-$(CONFIG_SPI_BCM63XX) += spi-bcm63xx.o
obj-$(CONFIG_SPI_BCM63XX_HSSPI) += spi-bcm63xx-hsspi.o
-obj-$(CONFIG_SPI_BCM_QSPI) += spi-brcmstb-qspi.o spi-bcm-qspi.o
+obj-$(CONFIG_SPI_BCM_QSPI) += spi-iproc-qspi.o spi-brcmstb-qspi.o spi-bcm-qspi.o
obj-$(CONFIG_SPI_BFIN5XX) += spi-bfin5xx.o
obj-$(CONFIG_SPI_ADI_V3) += spi-adi-v3.o
obj-$(CONFIG_SPI_BFIN_SPORT) += spi-bfin-sport.o
--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -175,9 +175,15 @@ enum base_type {
BASEMAX,
};
+enum irq_source {
+ SINGLE_L2,
+ MUXED_L1,
+};
+
struct bcm_qspi_irq {
const char *irq_name;
const irq_handler_t irq_handler;
+ int irq_source;
u32 mask;
};
@@ -198,6 +204,10 @@ struct bcm_qspi {
u32 base_clk;
u32 max_speed_hz;
void __iomem *base[BASEMAX];
+
+ /* Some SoCs provide custom interrupt status register(s) */
+ struct bcm_qspi_soc_intc *soc_intc;
+
struct bcm_qspi_parms last_parms;
struct qspi_trans trans_pos;
int curr_cs;
@@ -806,6 +816,7 @@ static int bcm_qspi_bspi_flash_read(stru
u32 addr = 0, len, len_words;
int ret = 0;
unsigned long timeo = msecs_to_jiffies(100);
+ struct bcm_qspi_soc_intc *soc_intc = qspi->soc_intc;
if (bcm_qspi_bspi_ver_three(qspi))
if (msg->addr_width == BSPI_ADDRLEN_4BYTES)
@@ -850,6 +861,15 @@ static int bcm_qspi_bspi_flash_read(stru
bcm_qspi_write(qspi, BSPI, BSPI_RAF_NUM_WORDS, len_words);
bcm_qspi_write(qspi, BSPI, BSPI_RAF_WATERMARK, 0);
+ if (qspi->soc_intc) {
+ /*
+ * clear soc MSPI and BSPI interrupts and enable
+ * BSPI interrupts.
+ */
+ soc_intc->bcm_qspi_int_ack(soc_intc, MSPI_BSPI_DONE);
+ soc_intc->bcm_qspi_int_set(soc_intc, BSPI_DONE, true);
+ }
+
/* Must flush previous writes before starting BSPI operation */
mb();
@@ -952,9 +972,12 @@ static irqreturn_t bcm_qspi_mspi_l2_isr(
u32 status = bcm_qspi_read(qspi, MSPI, MSPI_MSPI_STATUS);
if (status & MSPI_MSPI_STATUS_SPIF) {
+ struct bcm_qspi_soc_intc *soc_intc = qspi->soc_intc;
/* clear interrupt */
status &= ~MSPI_MSPI_STATUS_SPIF;
bcm_qspi_write(qspi, MSPI, MSPI_MSPI_STATUS, status);
+ if (qspi->soc_intc)
+ soc_intc->bcm_qspi_int_ack(soc_intc, MSPI_DONE);
complete(&qspi->mspi_done);
return IRQ_HANDLED;
}
@@ -966,20 +989,33 @@ static irqreturn_t bcm_qspi_bspi_lr_l2_i
{
struct bcm_qspi_dev_id *qspi_dev_id = dev_id;
struct bcm_qspi *qspi = qspi_dev_id->dev;
- u32 status;
+ struct bcm_qspi_soc_intc *soc_intc = qspi->soc_intc;
+ u32 status = qspi_dev_id->irqp->mask;
if (qspi->bspi_enabled && qspi->bspi_rf_msg) {
bcm_qspi_bspi_lr_data_read(qspi);
if (qspi->bspi_rf_msg_len == 0) {
qspi->bspi_rf_msg = NULL;
+ if (qspi->soc_intc) {
+ /* disable soc BSPI interrupt */
+ soc_intc->bcm_qspi_int_set(soc_intc, BSPI_DONE,
+ false);
+ /* indicate done */
+ status = INTR_BSPI_LR_SESSION_DONE_MASK;
+ }
+
if (qspi->bspi_rf_msg_status)
bcm_qspi_bspi_lr_clear(qspi);
else
bcm_qspi_bspi_flush_prefetch_buffers(qspi);
}
+
+ if (qspi->soc_intc)
+ /* clear soc BSPI interrupt */
+ soc_intc->bcm_qspi_int_ack(soc_intc, BSPI_DONE);
}
- status = (qspi_dev_id->irqp->mask & INTR_BSPI_LR_SESSION_DONE_MASK);
+ status &= INTR_BSPI_LR_SESSION_DONE_MASK;
if (qspi->bspi_enabled && status && qspi->bspi_rf_msg_len == 0)
complete(&qspi->bspi_done);
@@ -990,13 +1026,39 @@ static irqreturn_t bcm_qspi_bspi_lr_err_
{
struct bcm_qspi_dev_id *qspi_dev_id = dev_id;
struct bcm_qspi *qspi = qspi_dev_id->dev;
+ struct bcm_qspi_soc_intc *soc_intc = qspi->soc_intc;
dev_err(&qspi->pdev->dev, "BSPI INT error\n");
qspi->bspi_rf_msg_status = -EIO;
+ if (qspi->soc_intc)
+ /* clear soc interrupt */
+ soc_intc->bcm_qspi_int_ack(soc_intc, BSPI_ERR);
+
complete(&qspi->bspi_done);
return IRQ_HANDLED;
}
+static irqreturn_t bcm_qspi_l1_isr(int irq, void *dev_id)
+{
+ struct bcm_qspi_dev_id *qspi_dev_id = dev_id;
+ struct bcm_qspi *qspi = qspi_dev_id->dev;
+ struct bcm_qspi_soc_intc *soc_intc = qspi->soc_intc;
+ irqreturn_t ret = IRQ_NONE;
+
+ if (soc_intc) {
+ u32 status = soc_intc->bcm_qspi_get_int_status(soc_intc);
+
+ if (status & MSPI_DONE)
+ ret = bcm_qspi_mspi_l2_isr(irq, dev_id);
+ else if (status & BSPI_DONE)
+ ret = bcm_qspi_bspi_lr_l2_isr(irq, dev_id);
+ else if (status & BSPI_ERR)
+ ret = bcm_qspi_bspi_lr_err_l2_isr(irq, dev_id);
+ }
+
+ return ret;
+}
+
static const struct bcm_qspi_irq qspi_irq_tab[] = {
{
.irq_name = "spi_lr_fullness_reached",
@@ -1036,6 +1098,13 @@ static const struct bcm_qspi_irq qspi_ir
.irq_handler = bcm_qspi_mspi_l2_isr,
.mask = INTR_MSPI_HALTED_MASK,
},
+ {
+ /* single muxed L1 interrupt source */
+ .irq_name = "spi_l1_intr",
+ .irq_handler = bcm_qspi_l1_isr,
+ .irq_source = MUXED_L1,
+ .mask = QSPI_INTERRUPTS_ALL,
+ },
};
static void bcm_qspi_bspi_init(struct bcm_qspi *qspi)
@@ -1182,7 +1251,13 @@ int bcm_qspi_probe(struct platform_devic
for (val = 0; val < num_irqs; val++) {
irq = -1;
name = qspi_irq_tab[val].irq_name;
- irq = platform_get_irq_byname(pdev, name);
+ if (qspi_irq_tab[val].irq_source == SINGLE_L2) {
+ /* get the l2 interrupts */
+ irq = platform_get_irq_byname(pdev, name);
+ } else if (!num_ints && soc_intc) {
+ /* all mspi, bspi intrs muxed to one L1 intr */
+ irq = platform_get_irq(pdev, 0);
+ }
if (irq >= 0) {
ret = devm_request_irq(&pdev->dev, irq,
@@ -1209,6 +1284,17 @@ int bcm_qspi_probe(struct platform_devic
goto qspi_probe_err;
}
+ /*
+ * Some SoCs integrate spi controller (e.g., its interrupt bits)
+ * in specific ways
+ */
+ if (soc_intc) {
+ qspi->soc_intc = soc_intc;
+ soc_intc->bcm_qspi_int_set(soc_intc, MSPI_DONE, true);
+ } else {
+ qspi->soc_intc = NULL;
+ }
+
qspi->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(qspi->clk)) {
dev_warn(dev, "unable to get clock\n");
@@ -1288,6 +1374,11 @@ static int __maybe_unused bcm_qspi_resum
bcm_qspi_hw_init(qspi);
bcm_qspi_chip_select(qspi, qspi->curr_cs);
+ if (qspi->soc_intc)
+ /* enable MSPI interrupt */
+ qspi->soc_intc->bcm_qspi_int_set(qspi->soc_intc, MSPI_DONE,
+ true);
+
ret = clk_enable(qspi->clk);
if (!ret)
spi_master_resume(qspi->master);
--- a/drivers/spi/spi-bcm-qspi.h
+++ b/drivers/spi/spi-bcm-qspi.h
@@ -48,10 +48,26 @@
(INTR_MSPI_DONE_MASK | \
INTR_MSPI_HALTED_MASK)
+#define QSPI_INTERRUPTS_ALL \
+ (MSPI_INTERRUPTS_ALL | \
+ BSPI_LR_INTERRUPTS_ALL)
+
struct platform_device;
struct dev_pm_ops;
-struct bcm_qspi_soc_intc;
+enum {
+ MSPI_DONE = 0x1,
+ BSPI_DONE = 0x2,
+ BSPI_ERR = 0x4,
+ MSPI_BSPI_DONE = 0x7
+};
+
+struct bcm_qspi_soc_intc {
+ void (*bcm_qspi_int_ack)(struct bcm_qspi_soc_intc *soc_intc, int type);
+ void (*bcm_qspi_int_set)(struct bcm_qspi_soc_intc *soc_intc, int type,
+ bool en);
+ u32 (*bcm_qspi_get_int_status)(struct bcm_qspi_soc_intc *soc_intc);
+};
/* Read controller register*/
static inline u32 bcm_qspi_readl(bool be, void __iomem *addr)
@@ -72,6 +88,22 @@ static inline void bcm_qspi_writel(bool
writel_relaxed(data, addr);
}
+static inline u32 get_qspi_mask(int type)
+{
+ switch (type) {
+ case MSPI_DONE:
+ return INTR_MSPI_DONE_MASK;
+ case BSPI_DONE:
+ return BSPI_LR_INTERRUPTS_ALL;
+ case MSPI_BSPI_DONE:
+ return QSPI_INTERRUPTS_ALL;
+ case BSPI_ERR:
+ return BSPI_LR_INTERRUPTS_ERROR;
+ }
+
+ return 0;
+}
+
/* The common driver functions to be called by the SoC platform driver */
int bcm_qspi_probe(struct platform_device *pdev,
struct bcm_qspi_soc_intc *soc_intc);
--- /dev/null
+++ b/drivers/spi/spi-iproc-qspi.c
@@ -0,0 +1,163 @@
+/*
+ * Copyright 2016 Broadcom Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "spi-bcm-qspi.h"
+
+#define INTR_BASE_BIT_SHIFT 0x02
+#define INTR_COUNT 0x07
+
+struct bcm_iproc_intc {
+ struct bcm_qspi_soc_intc soc_intc;
+ struct platform_device *pdev;
+ void __iomem *int_reg;
+ void __iomem *int_status_reg;
+ spinlock_t soclock;
+ bool big_endian;
+};
+
+static u32 bcm_iproc_qspi_get_l2_int_status(struct bcm_qspi_soc_intc *soc_intc)
+{
+ struct bcm_iproc_intc *priv =
+ container_of(soc_intc, struct bcm_iproc_intc, soc_intc);
+ void __iomem *mmio = priv->int_status_reg;
+ int i;
+ u32 val = 0, sts = 0;
+
+ for (i = 0; i < INTR_COUNT; i++) {
+ if (bcm_qspi_readl(priv->big_endian, mmio + (i * 4)))
+ val |= 1UL << i;
+ }
+
+ if (val & INTR_MSPI_DONE_MASK)
+ sts |= MSPI_DONE;
+
+ if (val & BSPI_LR_INTERRUPTS_ALL)
+ sts |= BSPI_DONE;
+
+ if (val & BSPI_LR_INTERRUPTS_ERROR)
+ sts |= BSPI_ERR;
+
+ return sts;
+}
+
+static void bcm_iproc_qspi_int_ack(struct bcm_qspi_soc_intc *soc_intc, int type)
+{
+ struct bcm_iproc_intc *priv =
+ container_of(soc_intc, struct bcm_iproc_intc, soc_intc);
+ void __iomem *mmio = priv->int_status_reg;
+ u32 mask = get_qspi_mask(type);
+ int i;
+
+ for (i = 0; i < INTR_COUNT; i++) {
+ if (mask & (1UL << i))
+ bcm_qspi_writel(priv->big_endian, 1, mmio + (i * 4));
+ }
+}
+
+static void bcm_iproc_qspi_int_set(struct bcm_qspi_soc_intc *soc_intc, int type,
+ bool en)
+{
+ struct bcm_iproc_intc *priv =
+ container_of(soc_intc, struct bcm_iproc_intc, soc_intc);
+ void __iomem *mmio = priv->int_reg;
+ u32 mask = get_qspi_mask(type);
+ u32 val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->soclock, flags);
+
+ val = bcm_qspi_readl(priv->big_endian, mmio);
+
+ if (en)
+ val = val | (mask << INTR_BASE_BIT_SHIFT);
+ else
+ val = val & ~(mask << INTR_BASE_BIT_SHIFT);
+
+ bcm_qspi_writel(priv->big_endian, val, mmio);
+
+ spin_unlock_irqrestore(&priv->soclock, flags);
+}
+
+static int bcm_iproc_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct bcm_iproc_intc *priv;
+ struct bcm_qspi_soc_intc *soc_intc;
+ struct resource *res;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+ soc_intc = &priv->soc_intc;
+ priv->pdev = pdev;
+
+ spin_lock_init(&priv->soclock);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "intr_regs");
+ priv->int_reg = devm_ioremap_resource(dev, res);
+ if (IS_ERR(priv->int_reg))
+ return PTR_ERR(priv->int_reg);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "intr_status_reg");
+ priv->int_status_reg = devm_ioremap_resource(dev, res);
+ if (IS_ERR(priv->int_status_reg))
+ return PTR_ERR(priv->int_status_reg);
+
+ priv->big_endian = of_device_is_big_endian(dev->of_node);
+
+ bcm_iproc_qspi_int_ack(soc_intc, MSPI_BSPI_DONE);
+ bcm_iproc_qspi_int_set(soc_intc, MSPI_BSPI_DONE, false);
+
+ soc_intc->bcm_qspi_int_ack = bcm_iproc_qspi_int_ack;
+ soc_intc->bcm_qspi_int_set = bcm_iproc_qspi_int_set;
+ soc_intc->bcm_qspi_get_int_status = bcm_iproc_qspi_get_l2_int_status;
+
+ return bcm_qspi_probe(pdev, soc_intc);
+}
+
+static int bcm_iproc_remove(struct platform_device *pdev)
+{
+ return bcm_qspi_remove(pdev);
+}
+
+static const struct of_device_id bcm_iproc_of_match[] = {
+ { .compatible = "brcm,spi-nsp-qspi" },
+ { .compatible = "brcm,spi-ns2-qspi" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, bcm_iproc_of_match);
+
+static struct platform_driver bcm_iproc_driver = {
+ .probe = bcm_iproc_probe,
+ .remove = bcm_iproc_remove,
+ .driver = {
+ .name = "bcm_iproc",
+ .pm = &bcm_qspi_pm_ops,
+ .of_match_table = bcm_iproc_of_match,
+ }
+};
+module_platform_driver(bcm_iproc_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Kamal Dasu");
+MODULE_DESCRIPTION("SPI flash driver for Broadcom iProc SoCs");