KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

imx6: backport thermal driver

Browse source 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38229
This commit is contained in:
Luka Perkov 2013-09-27 10:49:28 +00:00
parent 9c8a5ef115
commit 8ec28437c3
2 changed files with 507 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

17
target/linux/imx6/config-3.10
View file

@ -30,7 +30,12 @@ CONFIG_ARM=y
CONFIG_ARM_ERRATA_754322=y
CONFIG_ARM_ERRATA_764369=y
CONFIG_ARM_ERRATA_775420=y
# CONFIG_ARM_EXYNOS4210_CPUFREQ is not set
# CONFIG_ARM_EXYNOS4X12_CPUFREQ is not set
# CONFIG_ARM_EXYNOS5250_CPUFREQ is not set
CONFIG_ARM_GIC=y
# CONFIG_ARM_IMX6Q_CPUFREQ is not set
# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set
CONFIG_ARM_L1_CACHE_SHIFT=6
CONFIG_ARM_L1_CACHE_SHIFT_6=y
# CONFIG_ARM_LPAE is not set
@ -57,6 +62,18 @@ CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
CONFIG_CPU_FREQ=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_STAT is not set
CONFIG_CPU_HAS_ASID=y
# CONFIG_CPU_ICACHE_DISABLE is not set
CONFIG_CPU_PABRT_V7=y

490
target/linux/imx6/patches-3.10/0015-thermal-add-imx-thermal-driver-support.patch Normal file
View file

@ -0,0 +1,490 @@
From ca3de46b50809000b5ba708634e26ad979a4a63a Mon Sep 17 00:00:00 2001
From: Shawn Guo <shawn.guo@linaro.org>
Date: Mon, 24 Jun 2013 14:30:44 +0800
Subject: [PATCH] thermal: add imx thermal driver support
This is based on the initial imx thermal work done by
Rob Lee <rob.lee@linaro.org> (Not sure if the email address is still
valid). Since he is no longer interested in the work and I have
rewritten a significant amount of the code, I just took the authorship
over from him.
It adds the imx thermal support using Temperature Monitor (TEMPMON)
block found on some Freescale i.MX SoCs. The driver uses syscon regmap
interface to access TEMPMON control registers and calibration data, and
supports cpufreq as the cooling device.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
---
.../devicetree/bindings/thermal/imx-thermal.txt | 17 +
drivers/thermal/Kconfig | 11 +
drivers/thermal/Makefile | 1 +
drivers/thermal/imx_thermal.c | 397 +++++++++++++++++++++
4 files changed, 426 insertions(+)
create mode 100644 Documentation/devicetree/bindings/thermal/imx-thermal.txt
create mode 100644 drivers/thermal/imx_thermal.c
diff --git a/Documentation/devicetree/bindings/thermal/imx-thermal.txt b/Documentation/devicetree/bindings/thermal/imx-thermal.txt
new file mode 100644
index 0000000..541c25e
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/imx-thermal.txt
@@ -0,0 +1,17 @@
+* Temperature Monitor (TEMPMON) on Freescale i.MX SoCs
+
+Required properties:
+- compatible : "fsl,imx6q-thermal"
+- fsl,tempmon : phandle pointer to system controller that contains TEMPMON
+ control registers, e.g. ANATOP on imx6q.
+- fsl,tempmon-data : phandle pointer to fuse controller that contains TEMPMON
+ calibration data, e.g. OCOTP on imx6q. The details about calibration data
+ can be found in SoC Reference Manual.
+
+Example:
+
+tempmon {
+ compatible = "fsl,imx6q-tempmon";
+ fsl,tempmon = <&anatop>;
+ fsl,tempmon-data = <&ocotp>;
+};
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index e988c81..69eed55 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -91,6 +91,17 @@ config THERMAL_EMULATION
because userland can easily disable the thermal policy by simply
flooding this sysfs node with low temperature values.
+config IMX_THERMAL
+ tristate "Temperature sensor driver for Freescale i.MX SoCs"
+ depends on CPU_THERMAL
+ depends on MFD_SYSCON
+ depends on OF
+ help
+ Support for Temperature Monitor (TEMPMON) found on Freescale i.MX SoCs.
+ It supports one critical trip point and one passive trip point. The
+ cpufreq is used as the cooling device to throttle CPUs when the
+ passive trip is crossed.
+
config SPEAR_THERMAL
bool "SPEAr thermal sensor driver"
depends on PLAT_SPEAR
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index 67184a2..dff19c6 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_EXYNOS_THERMAL) += exynos_thermal.o
obj-$(CONFIG_DOVE_THERMAL) += dove_thermal.o
obj-$(CONFIG_DB8500_THERMAL) += db8500_thermal.o
obj-$(CONFIG_ARMADA_THERMAL) += armada_thermal.o
+obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o
obj-$(CONFIG_DB8500_CPUFREQ_COOLING) += db8500_cpufreq_cooling.o
obj-$(CONFIG_INTEL_POWERCLAMP) += intel_powerclamp.o
obj-$(CONFIG_X86_PKG_TEMP_THERMAL) += x86_pkg_temp_thermal.o
diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
new file mode 100644
index 0000000..d16c33c
--- /dev/null
+++ b/drivers/thermal/imx_thermal.c
@@ -0,0 +1,397 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/cpu_cooling.h>
+#include <linux/cpufreq.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/thermal.h>
+#include <linux/types.h>
+
+#define REG_SET 0x4
+#define REG_CLR 0x8
+#define REG_TOG 0xc
+
+#define MISC0 0x0150
+#define MISC0_REFTOP_SELBIASOFF (1 << 3)
+
+#define TEMPSENSE0 0x0180
+#define TEMPSENSE0_TEMP_CNT_SHIFT 8
+#define TEMPSENSE0_TEMP_CNT_MASK (0xfff << TEMPSENSE0_TEMP_CNT_SHIFT)
+#define TEMPSENSE0_FINISHED (1 << 2)
+#define TEMPSENSE0_MEASURE_TEMP (1 << 1)
+#define TEMPSENSE0_POWER_DOWN (1 << 0)
+
+#define TEMPSENSE1 0x0190
+#define TEMPSENSE1_MEASURE_FREQ 0xffff
+
+#define OCOTP_ANA1 0x04e0
+
+/* The driver supports 1 passive trip point and 1 critical trip point */
+enum imx_thermal_trip {
+ IMX_TRIP_PASSIVE,
+ IMX_TRIP_CRITICAL,
+ IMX_TRIP_NUM,
+};
+
+/*
+ * It defines the temperature in millicelsius for passive trip point
+ * that will trigger cooling action when crossed.
+ */
+#define IMX_TEMP_PASSIVE 85000
+
+/*
+ * The maximum die temperature on imx parts is 105C, let's give some cushion
+ * for noise and possible temperature rise between measurements.
+ */
+#define IMX_TEMP_CRITICAL 100000
+
+#define IMX_POLLING_DELAY 2000 /* millisecond */
+#define IMX_PASSIVE_DELAY 1000
+
+struct imx_thermal_data {
+ struct thermal_zone_device *tz;
+ struct thermal_cooling_device *cdev;
+ enum thermal_device_mode mode;
+ struct regmap *tempmon;
+ int c1, c2; /* See formula in imx_get_sensor_data() */
+};
+
+static int imx_get_temp(struct thermal_zone_device *tz, unsigned long *temp)
+{
+ struct imx_thermal_data *data = tz->devdata;
+ struct regmap *map = data->tempmon;
+ static unsigned long last_temp;
+ unsigned int n_meas;
+ u32 val;
+
+ /*
+ * Every time we measure the temperature, we will power on the
+ * temperature sensor, enable measurements, take a reading,
+ * disable measurements, power off the temperature sensor.
+ */
+ regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_POWER_DOWN);
+ regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_MEASURE_TEMP);
+
+ /*
+ * According to the temp sensor designers, it may require up to ~17us
+ * to complete a measurement.
+ */
+ usleep_range(20, 50);
+
+ regmap_read(map, TEMPSENSE0, &val);
+ regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_MEASURE_TEMP);
+ regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_POWER_DOWN);
+
+ if ((val & TEMPSENSE0_FINISHED) == 0) {
+ dev_dbg(&tz->device, "temp measurement never finished\n");
+ return -EAGAIN;
+ }
+
+ n_meas = (val & TEMPSENSE0_TEMP_CNT_MASK) >> TEMPSENSE0_TEMP_CNT_SHIFT;
+
+ /* See imx_get_sensor_data() for formula derivation */
+ *temp = data->c2 + data->c1 * n_meas;
+
+ if (*temp != last_temp) {
+ dev_dbg(&tz->device, "millicelsius: %ld\n", *temp);
+ last_temp = *temp;
+ }
+
+ return 0;
+}
+
+static int imx_get_mode(struct thermal_zone_device *tz,
+ enum thermal_device_mode *mode)
+{
+ struct imx_thermal_data *data = tz->devdata;
+
+ *mode = data->mode;
+
+ return 0;
+}
+
+static int imx_set_mode(struct thermal_zone_device *tz,
+ enum thermal_device_mode mode)
+{
+ struct imx_thermal_data *data = tz->devdata;
+
+ if (mode == THERMAL_DEVICE_ENABLED) {
+ tz->polling_delay = IMX_POLLING_DELAY;
+ tz->passive_delay = IMX_PASSIVE_DELAY;
+ } else {
+ tz->polling_delay = 0;
+ tz->passive_delay = 0;
+ }
+
+ data->mode = mode;
+ thermal_zone_device_update(tz);
+
+ return 0;
+}
+
+static int imx_get_trip_type(struct thermal_zone_device *tz, int trip,
+ enum thermal_trip_type *type)
+{
+ *type = (trip == IMX_TRIP_PASSIVE) ? THERMAL_TRIP_PASSIVE :
+ THERMAL_TRIP_CRITICAL;
+ return 0;
+}
+
+static int imx_get_crit_temp(struct thermal_zone_device *tz,
+ unsigned long *temp)
+{
+ *temp = IMX_TEMP_CRITICAL;
+ return 0;
+}
+
+static int imx_get_trip_temp(struct thermal_zone_device *tz, int trip,
+ unsigned long *temp)
+{
+ *temp = (trip == IMX_TRIP_PASSIVE) ? IMX_TEMP_PASSIVE :
+ IMX_TEMP_CRITICAL;
+ return 0;
+}
+
+static int imx_bind(struct thermal_zone_device *tz,
+ struct thermal_cooling_device *cdev)
+{
+ int ret;
+
+ ret = thermal_zone_bind_cooling_device(tz, IMX_TRIP_PASSIVE, cdev,
+ THERMAL_NO_LIMIT,
+ THERMAL_NO_LIMIT);
+ if (ret) {
+ dev_err(&tz->device,
+ "binding zone %s with cdev %s failed:%d\n",
+ tz->type, cdev->type, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int imx_unbind(struct thermal_zone_device *tz,
+ struct thermal_cooling_device *cdev)
+{
+ int ret;
+
+ ret = thermal_zone_unbind_cooling_device(tz, IMX_TRIP_PASSIVE, cdev);
+ if (ret) {
+ dev_err(&tz->device,
+ "unbinding zone %s with cdev %s failed:%d\n",
+ tz->type, cdev->type, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct thermal_zone_device_ops imx_tz_ops = {
+ .bind = imx_bind,
+ .unbind = imx_unbind,
+ .get_temp = imx_get_temp,
+ .get_mode = imx_get_mode,
+ .set_mode = imx_set_mode,
+ .get_trip_type = imx_get_trip_type,
+ .get_trip_temp = imx_get_trip_temp,
+ .get_crit_temp = imx_get_crit_temp,
+};
+
+static int imx_get_sensor_data(struct platform_device *pdev)
+{
+ struct imx_thermal_data *data = platform_get_drvdata(pdev);
+ struct regmap *map;
+ int t1, t2, n1, n2;
+ int ret;
+ u32 val;
+
+ map = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+ "fsl,tempmon-data");
+ if (IS_ERR(map)) {
+ ret = PTR_ERR(map);
+ dev_err(&pdev->dev, "failed to get sensor regmap: %d\n", ret);
+ return ret;
+ }
+
+ ret = regmap_read(map, OCOTP_ANA1, &val);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to read sensor data: %d\n", ret);
+ return ret;
+ }
+
+ if (val == 0 || val == ~0) {
+ dev_err(&pdev->dev, "invalid sensor calibration data\n");
+ return -EINVAL;
+ }
+
+ /*
+ * Sensor data layout:
+ * [31:20] - sensor value @ 25C
+ * [19:8] - sensor value of hot
+ * [7:0] - hot temperature value
+ */
+ n1 = val >> 20;
+ n2 = (val & 0xfff00) >> 8;
+ t2 = val & 0xff;
+ t1 = 25; /* t1 always 25C */
+
+ /*
+ * Derived from linear interpolation,
+ * Tmeas = T2 + (Nmeas - N2) * (T1 - T2) / (N1 - N2)
+ * We want to reduce this down to the minimum computation necessary
+ * for each temperature read. Also, we want Tmeas in millicelsius
+ * and we don't want to lose precision from integer division. So...
+ * milli_Tmeas = 1000 * T2 + 1000 * (Nmeas - N2) * (T1 - T2) / (N1 - N2)
+ * Let constant c1 = 1000 * (T1 - T2) / (N1 - N2)
+ * milli_Tmeas = (1000 * T2) + c1 * (Nmeas - N2)
+ * milli_Tmeas = (1000 * T2) + (c1 * Nmeas) - (c1 * N2)
+ * Let constant c2 = (1000 * T2) - (c1 * N2)
+ * milli_Tmeas = c2 + (c1 * Nmeas)
+ */
+ data->c1 = 1000 * (t1 - t2) / (n1 - n2);
+ data->c2 = 1000 * t2 - data->c1 * n2;
+
+ return 0;
+}
+
+static int imx_thermal_probe(struct platform_device *pdev)
+{
+ struct imx_thermal_data *data;
+ struct cpumask clip_cpus;
+ struct regmap *map;
+ int ret;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ map = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, "fsl,tempmon");
+ if (IS_ERR(map)) {
+ ret = PTR_ERR(map);
+ dev_err(&pdev->dev, "failed to get tempmon regmap: %d\n", ret);
+ return ret;
+ }
+ data->tempmon = map;
+
+ platform_set_drvdata(pdev, data);
+
+ ret = imx_get_sensor_data(pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to get sensor data\n");
+ return ret;
+ }
+
+ /* Make sure sensor is in known good state for measurements */
+ regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_POWER_DOWN);
+ regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_MEASURE_TEMP);
+ regmap_write(map, TEMPSENSE1 + REG_CLR, TEMPSENSE1_MEASURE_FREQ);
+ regmap_write(map, MISC0 + REG_SET, MISC0_REFTOP_SELBIASOFF);
+ regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_POWER_DOWN);
+
+ cpumask_set_cpu(0, &clip_cpus);
+ data->cdev = cpufreq_cooling_register(&clip_cpus);
+ if (IS_ERR(data->cdev)) {
+ ret = PTR_ERR(data->cdev);
+ dev_err(&pdev->dev,
+ "failed to register cpufreq cooling device: %d\n", ret);
+ return ret;
+ }
+
+ data->tz = thermal_zone_device_register("imx_thermal_zone",
+ IMX_TRIP_NUM, 0, data,
+ &imx_tz_ops, NULL,
+ IMX_PASSIVE_DELAY,
+ IMX_POLLING_DELAY);
+ if (IS_ERR(data->tz)) {
+ ret = PTR_ERR(data->tz);
+ dev_err(&pdev->dev,
+ "failed to register thermal zone device %d\n", ret);
+ cpufreq_cooling_unregister(data->cdev);
+ return ret;
+ }
+
+ data->mode = THERMAL_DEVICE_ENABLED;
+
+ return 0;
+}
+
+static int imx_thermal_remove(struct platform_device *pdev)
+{
+ struct imx_thermal_data *data = platform_get_drvdata(pdev);
+
+ thermal_zone_device_unregister(data->tz);
+ cpufreq_cooling_unregister(data->cdev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int imx_thermal_suspend(struct device *dev)
+{
+ struct imx_thermal_data *data = dev_get_drvdata(dev);
+ struct regmap *map = data->tempmon;
+ u32 val;
+
+ regmap_read(map, TEMPSENSE0, &val);
+ if ((val & TEMPSENSE0_POWER_DOWN) == 0) {
+ /*
+ * If a measurement is taking place, wait for a long enough
+ * time for it to finish, and then check again. If it still
+ * does not finish, something must go wrong.
+ */
+ udelay(50);
+ regmap_read(map, TEMPSENSE0, &val);
+ if ((val & TEMPSENSE0_POWER_DOWN) == 0)
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static int imx_thermal_resume(struct device *dev)
+{
+ /* Nothing to do for now */
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(imx_thermal_pm_ops,
+ imx_thermal_suspend, imx_thermal_resume);
+
+static const struct of_device_id of_imx_thermal_match[] = {
+ { .compatible = "fsl,imx6q-tempmon", },
+ { /* end */ }
+};
+
+static struct platform_driver imx_thermal = {
+ .driver = {
+ .name = "imx_thermal",
+ .owner = THIS_MODULE,
+ .pm = &imx_thermal_pm_ops,
+ .of_match_table = of_imx_thermal_match,
+ },
+ .probe = imx_thermal_probe,
+ .remove = imx_thermal_remove,
+};
+module_platform_driver(imx_thermal);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("Thermal driver for Freescale i.MX SoCs");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:imx-thermal");
--
1.8.4