KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

fix style

Browse source 
SVN-Revision: 33731
This commit is contained in:
Luka Perkov 2012-10-12 12:11:45 +00:00
parent 9e9efd8e49
commit 8bf6f0d579
1 changed files with 11 additions and 13 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

24
docs/network.tex
View file

@ -54,7 +54,7 @@ config interface "lan"
option ifname "eth0"
option proto "dhcp"
option ipaddr "192.168.1.1" (optional)
option hostname "openwrt" (optional)
option hostname "openwrt" (optional)
\end{Verbatim}
PPP based protocols (\texttt{pppoe}, \texttt{pptp}, ...) accept these options:
@ -70,7 +70,6 @@ PPP based protocols (\texttt{pppoe}, \texttt{pptp}, ...) accept these options:
",<interval>" to the keepalive value
\item{demand} \\
Use Dial on Demand (value specifies the maximum idle time.
\item{server: (pptp)} \\
The remote pptp server IP
\end{itemize}
@ -84,7 +83,7 @@ config interface "lan"
option proto "pppoe"
option username "username"
option password "openwrt"
option mtu 1492 (optional)
option mtu "1492" (optional)
\end{Verbatim}
\subsubsection{Setting up static routes}
@ -96,10 +95,10 @@ Simply add a config section like this:
\begin{Verbatim}
config route foo
option interface lan
option target 1.1.1.0
option netmask 255.255.255.0
option gateway 192.168.1.1
option interface "lan"
option target "1.1.1.0"
option netmask "255.255.255.0"
option gateway "192.168.1.1"
\end{Verbatim}
The name for the route section is optional, the \texttt{interface}, \texttt{target} and
@ -166,9 +165,9 @@ file and change the settings accordingly :
\begin{Verbatim}
config 6tunnel
option tnlifname 'sixbone'
option remoteip4 '1.0.0.1'
option localip4 '1.0.0.2'
option localip6 '2001::DEAD::BEEF::1'
option remoteip4 '1.0.0.1'
option localip4 '1.0.0.2'
option localip6 '2001::DEAD::BEEF::1'
\end{Verbatim}
\begin{itemize}
@ -185,7 +184,7 @@ config 6tunnel
This address is given by the tunnel broker
\end{itemize}
Using the same package you can also setup an IPv6 bridged connection :
Using the same package you can also setup an IPv6 bridged connection:
\begin{Verbatim}
config 6bridge
@ -197,7 +196,6 @@ and uses ebtables to filter anything that is not IPv6 on the bridge.
This configuration is particularly useful if your router is not
IPv6 ND proxy capable (see: http://www.rfc-archive.org/getrfc.php?rfc=4389).
IPv6 static addressing is also supported using a similar setup as
IPv4 but with the \texttt{ip6} prefixing (when applicable).
@ -205,6 +203,6 @@ IPv4 but with the \texttt{ip6} prefixing (when applicable).
config interface "lan"
option ifname "eth0"
option proto "static"
option ip6addr "fe80::200:ff:fe00:0/64"
option ip6addr "fe80::200:ff:fe00:0/64"
option ip6gw "2001::DEAF:BEE:1"
\end{Verbatim}