Add hardware details for WRT54G v1.1
SVN-Revision: 300
This commit is contained in:
parent
e25d36a468
commit
87c8266371
7 changed files with 425 additions and 0 deletions
16
openwrt/docs/hardware/linksys/wrt54g_v11/cpuinfo.txt
Normal file
16
openwrt/docs/hardware/linksys/wrt54g_v11/cpuinfo.txt
Normal file
|
@ -0,0 +1,16 @@
|
|||
system type : Broadcom BCM947XX
|
||||
processor : 0
|
||||
cpu model : BCM4710 V0.0
|
||||
BogoMIPS : 82.94
|
||||
wait instruction : no
|
||||
microsecond timers : yes
|
||||
tlb_entries : 32
|
||||
extra interrupt vector : no
|
||||
hardware watchpoint : no
|
||||
VCED exceptions : not available
|
||||
VCEI exceptions : not available
|
||||
dcache hits : 2866936757
|
||||
dcache misses : 57830034
|
||||
icache hits : 1724839356
|
||||
icache misses : 431170605
|
||||
instructions : 2156850242
|
96
openwrt/docs/hardware/linksys/wrt54g_v11/dmesg-2_4_29.txt
Normal file
96
openwrt/docs/hardware/linksys/wrt54g_v11/dmesg-2_4_29.txt
Normal file
|
@ -0,0 +1,96 @@
|
|||
CPU revision is: 00024000
|
||||
Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes.
|
||||
Primary data cache 4kB, 2-way, linesize 16 bytes.
|
||||
Linux version 2.4.29 (nthill@mr-grey) (gcc version 3.3.5) #1 Tue Mar 1 19:49:53 CET 2005
|
||||
Determined physical RAM map:
|
||||
memory: 01000000 @ 00000000 (usable)
|
||||
On node 0 totalpages: 4096
|
||||
zone(0): 4096 pages.
|
||||
zone(1): 0 pages.
|
||||
zone(2): 0 pages.
|
||||
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs init=/etc/preinit noinitrd console=ttyS0,115200
|
||||
CPU: BCM4710 rev 0 at 125 MHz
|
||||
Using 62.400 MHz high precision timer.
|
||||
!unable to setup serial console!
|
||||
Calibrating delay loop... 82.94 BogoMIPS
|
||||
Memory: 14044k/16384k available (1485k kernel code, 2340k reserved, 100k data, 100k init, 0k highmem)
|
||||
Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
|
||||
Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
|
||||
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
|
||||
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
|
||||
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
|
||||
Checking for 'wait' instruction... unavailable.
|
||||
POSIX conformance testing by UNIFIX
|
||||
PCI: Fixing up bus 0
|
||||
PCI: Fixing up bridge
|
||||
PCI: Setting latency timer of device 01:00.0 to 64
|
||||
PCI: Fixing up bus 1
|
||||
Linux NET4.0 for Linux 2.4
|
||||
Based upon Swansea University Computer Society NET3.039
|
||||
Initializing RT netlink socket
|
||||
Starting kswapd
|
||||
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
|
||||
devfs: boot_options: 0x1
|
||||
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
|
||||
Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
|
||||
pty: 256 Unix98 ptys configured
|
||||
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
|
||||
Software Watchdog Timer: 0.05, timer margin: 60 sec
|
||||
loop: loaded (max 8 devices)
|
||||
PPP generic driver version 2.4.2
|
||||
Amd/Fujitsu Extended Query Table v1.1 at 0x0040
|
||||
Physically mapped flash: Swapping erase regions for broken CFI table.
|
||||
number of CFI chips: 1
|
||||
cfi_cmdset_0002: Disabling fast programming due to code brokenness.
|
||||
Flash device: 0x400000 at 0x1fc00000
|
||||
Creating 5 MTD partitions on "Physically mapped flash":
|
||||
0x00000000-0x00040000 : "pmon"
|
||||
0x00040000-0x003f0000 : "linux"
|
||||
0x000edd94-0x001fd000 : "rootfs"
|
||||
mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
|
||||
0x003f0000-0x00400000 : "nvram"
|
||||
0x00200000-0x003f0000 : "OpenWrt"
|
||||
sflash: chipcommon not found
|
||||
Initializing Cryptographic API
|
||||
NET4: Linux TCP/IP 1.0 for NET4.0
|
||||
IP Protocols: ICMP, UDP, TCP, IGMP
|
||||
IP: routing cache hash table of 512 buckets, 4Kbytes
|
||||
TCP: Hash tables configured (established 1024 bind 2048)
|
||||
ip_conntrack version 2.1 (128 buckets, 1024 max) - 288 bytes per conntrack
|
||||
ip_tables: (C) 2000-2002 Netfilter core team
|
||||
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
|
||||
NET4: Ethernet Bridge 008 for NET4.0
|
||||
Bridge firewalling registered
|
||||
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
|
||||
All bugs added by David S. Miller <davem@redhat.com>
|
||||
VFS: Mounted root (squashfs filesystem) readonly.
|
||||
Mounted devfs on /dev
|
||||
Freeing unused kernel memory: 100k freed
|
||||
Warning: unable to open an initial console.
|
||||
Algorithmics/MIPS FPU Emulator v1.5
|
||||
diag boardtype: 0000041a
|
||||
using v1 hardware
|
||||
jffs2.bbc: SIZE compression mode activated.
|
||||
PCI: Setting latency timer of device 00:02.0 to 64
|
||||
5325E phy=FFFFFFFF
|
||||
eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0
|
||||
PCI: Setting latency timer of device 00:08.0 to 64
|
||||
5325E phy=FFFFFFFF
|
||||
eth1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0
|
||||
PCI: Setting latency timer of device 01:08.0 to 64
|
||||
PCI: Enabling device 01:08.0 (0004 -> 0006)
|
||||
eth2: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0
|
||||
device eth0 entered promiscuous mode
|
||||
vlan2: add 01:00:5e:00:00:01 mcast address to master interface
|
||||
device eth1 entered promiscuous mode
|
||||
device eth2 entered promiscuous mode
|
||||
br0: port 3(eth2) entering learning state
|
||||
br0: port 2(eth1) entering learning state
|
||||
br0: port 1(vlan2) entering learning state
|
||||
br0: port 3(eth2) entering forwarding state
|
||||
br0: topology change detected, propagating
|
||||
br0: port 2(eth1) entering forwarding state
|
||||
br0: topology change detected, propagating
|
||||
br0: port 1(vlan2) entering forwarding state
|
||||
br0: topology change detected, propagating
|
||||
vlan1: add 01:00:5e:00:00:01 mcast address to master interface
|
54
openwrt/docs/hardware/linksys/wrt54g_v11/ifconfig.txt
Normal file
54
openwrt/docs/hardware/linksys/wrt54g_v11/ifconfig.txt
Normal file
|
@ -0,0 +1,54 @@
|
|||
br0 Link encap:Ethernet HWaddr 00:0C:41:B3:3C:55
|
||||
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
|
||||
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
|
||||
RX packets:6022 errors:0 dropped:0 overruns:0 frame:0
|
||||
TX packets:5768 errors:0 dropped:0 overruns:0 carrier:0
|
||||
collisions:0 txqueuelen:0
|
||||
RX bytes:356276 (347.9 KiB) TX bytes:457411 (446.6 KiB)
|
||||
|
||||
eth0 Link encap:Ethernet HWaddr 00:0C:41:B3:3C:55
|
||||
UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1
|
||||
RX packets:6204 errors:0 dropped:0 overruns:0 frame:0
|
||||
TX packets:5774 errors:0 dropped:0 overruns:0 carrier:0
|
||||
collisions:0 txqueuelen:1000
|
||||
RX bytes:514297 (502.2 KiB) TX bytes:484047 (472.7 KiB)
|
||||
Interrupt:3 Base address:0x2000
|
||||
|
||||
eth1 Link encap:Ethernet HWaddr 00:0C:41:B3:3C:56
|
||||
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
|
||||
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
|
||||
TX packets:66 errors:0 dropped:0 overruns:0 carrier:0
|
||||
collisions:0 txqueuelen:1000
|
||||
RX bytes:0 (0.0 B) TX bytes:7209 (7.0 KiB)
|
||||
Interrupt:4 Base address:0x8000
|
||||
|
||||
eth2 Link encap:Ethernet HWaddr 00:0C:41:B3:3C:57
|
||||
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
|
||||
RX packets:0 errors:0 dropped:0 overruns:0 frame:2202
|
||||
TX packets:93 errors:36 dropped:0 overruns:0 carrier:0
|
||||
collisions:0 txqueuelen:1000
|
||||
RX bytes:0 (0.0 B) TX bytes:11951 (11.6 KiB)
|
||||
Interrupt:6 Base address:0x2000
|
||||
|
||||
lo Link encap:Local Loopback
|
||||
inet addr:127.0.0.1 Mask:255.0.0.0
|
||||
UP LOOPBACK RUNNING MTU:16436 Metric:1
|
||||
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
|
||||
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
|
||||
collisions:0 txqueuelen:0
|
||||
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
|
||||
|
||||
vlan1 Link encap:Ethernet HWaddr 00:0C:41:B3:3C:55
|
||||
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
|
||||
RX packets:181 errors:0 dropped:0 overruns:0 frame:0
|
||||
TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
|
||||
collisions:0 txqueuelen:0
|
||||
RX bytes:19634 (19.1 KiB) TX bytes:3564 (3.4 KiB)
|
||||
|
||||
vlan2 Link encap:Ethernet HWaddr 00:0C:41:B3:3C:55
|
||||
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
|
||||
RX packets:6023 errors:0 dropped:0 overruns:0 frame:0
|
||||
TX packets:5768 errors:0 dropped:0 overruns:0 carrier:0
|
||||
collisions:0 txqueuelen:0
|
||||
RX bytes:382991 (374.0 KiB) TX bytes:480483 (469.2 KiB)
|
||||
|
23
openwrt/docs/hardware/linksys/wrt54g_v11/info.txt
Normal file
23
openwrt/docs/hardware/linksys/wrt54g_v11/info.txt
Normal file
|
@ -0,0 +1,23 @@
|
|||
Linksys WRT54G v1.1
|
||||
|
||||
Online Description from Linksys:
|
||||
http://www.linksys.com/products/product.asp?grid=33&scid=35&prid=601
|
||||
|
||||
CPU: BCM4710 at 125 MHz
|
||||
RAM: 16 MB
|
||||
Flash: 4 MB (AMD AM29LV320DT 2 M x 16-Bit)
|
||||
1 Broadcom BCM47xx 10/100 Mbps Ethernet Controller
|
||||
1 Broadcom BCM4320 802.11 Wireless Controller
|
||||
1 Infineon-ADMtek ADM6996L 5-ports Ethernet swith
|
||||
serial port possible (but not used)
|
||||
JTAG interface available (but not used)
|
||||
|
||||
List of files:
|
||||
nvram.txt: contents of NVRAM after 'mtd erase' and OpenWRT upgrade
|
||||
cpuinfo.txt: contents of /proc/cpuinfo (2.4.29)
|
||||
pci.txt: contents of /proc/pci (2.4.29)
|
||||
dmesg-2_4_29.txt: dmesg from Kernel 2.4.29
|
||||
lspci-vv.txt: output of lspci -vv -P ./proc/bus/pci (deported)
|
||||
|
||||
--
|
||||
Nico
|
92
openwrt/docs/hardware/linksys/wrt54g_v11/lspci-vv.txt
Normal file
92
openwrt/docs/hardware/linksys/wrt54g_v11/lspci-vv.txt
Normal file
|
@ -0,0 +1,92 @@
|
|||
0000:00:00.0 RAM memory: Broadcom Corporation: Unknown device 0803
|
||||
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
|
||||
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
|
||||
Interrupt: pin ? routed to IRQ 6
|
||||
Region 0: Memory at 18000000 (32-bit, non-prefetchable) [disabled] [size=4K]
|
||||
Region 1: Memory at <unassigned> (32-bit, non-prefetchable) [disabled] [size=128M]
|
||||
Region 2: Memory at 10000000 (32-bit, non-prefetchable) [disabled] [size=128M]
|
||||
Region 3: Memory at 80000000 (32-bit, non-prefetchable) [disabled] [size=80000000]
|
||||
Expansion ROM at <unassigned> [disabled] [size=2K]
|
||||
|
||||
0000:00:01.0 Ethernet controller: Broadcom Corporation BCM47xx Sentry5 iLine32 HomePNA 2.0
|
||||
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
|
||||
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
|
||||
Interrupt: pin B routed to IRQ 5
|
||||
Region 0: Memory at 18001000 (32-bit, non-prefetchable) [disabled] [size=4K]
|
||||
Expansion ROM at <unassigned> [disabled] [size=2K]
|
||||
|
||||
0000:00:02.0 Ethernet controller: Broadcom Corporation Sentry5 Ethernet Controller
|
||||
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
|
||||
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
|
||||
Latency: 64
|
||||
Interrupt: pin A routed to IRQ 3
|
||||
Region 0: Memory at 18002000 (32-bit, non-prefetchable) [disabled] [size=4K]
|
||||
Expansion ROM at <unassigned> [disabled] [size=2K]
|
||||
|
||||
0000:00:03.0 Modem: Broadcom Corporation Sentry5 UART (prog-if 00 [Generic])
|
||||
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
|
||||
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
|
||||
Interrupt: pin C routed to IRQ 2
|
||||
Region 0: Memory at 18003000 (32-bit, non-prefetchable) [disabled] [size=4K]
|
||||
Expansion ROM at <unassigned> [disabled] [size=2K]
|
||||
|
||||
0000:00:04.0 USB Controller: Broadcom Corporation Sentry5 USB Controller (prog-if 10 [OHCI])
|
||||
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
|
||||
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
|
||||
Interrupt: pin D routed to IRQ 2
|
||||
Region 0: Memory at 18004000 (32-bit, non-prefetchable) [disabled] [size=4K]
|
||||
Expansion ROM at <unassigned> [disabled] [size=2K]
|
||||
|
||||
0000:00:05.0 PCI bridge: Broadcom Corporation Sentry5 PCI Bridge (prog-if 00 [Normal decode])
|
||||
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
|
||||
Status: Cap+ 66MHz+ UDF+ FastB2B+ ParErr+ DEVSEL=?? >TAbort+ <TAbort+ <MAbort+ >SERR+ <PERR+
|
||||
Region 0: Memory at 18005000 (32-bit, non-prefetchable) [disabled] [size=4K]
|
||||
Region 1: Memory at 08000000 (32-bit, non-prefetchable) [disabled] [size=128M]
|
||||
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
|
||||
I/O behind bridge: 00000000-00000fff
|
||||
Memory behind bridge: 00000000-000fffff
|
||||
Prefetchable memory behind bridge: 00000000-000fffff
|
||||
Expansion ROM at <unassigned> [disabled] [size=2K]
|
||||
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
|
||||
|
||||
0000:00:06.0 MIPS: Broadcom Corporation Sentry5 MIPS32 CPU
|
||||
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
|
||||
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
|
||||
Interrupt: pin ? routed to IRQ 6
|
||||
Region 0: Memory at 18006000 (32-bit, non-prefetchable) [disabled] [size=4K]
|
||||
Region 1: Memory at ff200000 (32-bit, non-prefetchable) [disabled] [size=2M]
|
||||
Expansion ROM at <unassigned> [disabled] [size=2K]
|
||||
|
||||
0000:00:07.0 FLASH memory: Broadcom Corporation Sentry5 External Interface Core
|
||||
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
|
||||
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
|
||||
Interrupt: pin E routed to IRQ 2
|
||||
Region 0: Memory at 18007000 (32-bit, non-prefetchable) [disabled] [size=4K]
|
||||
Region 1: Memory at 1f000000 (32-bit, non-prefetchable) [disabled] [size=16M]
|
||||
Expansion ROM at <unassigned> [disabled] [size=2K]
|
||||
|
||||
0000:00:08.0 Ethernet controller: Broadcom Corporation Sentry5 Ethernet Controller
|
||||
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
|
||||
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
|
||||
Latency: 64
|
||||
Interrupt: pin F routed to IRQ 4
|
||||
Region 0: Memory at 18008000 (32-bit, non-prefetchable) [disabled] [size=4K]
|
||||
Expansion ROM at <unassigned> [disabled] [size=2K]
|
||||
|
||||
0000:01:00.0 Host bridge: Broadcom Corporation BCM4710 Sentry5 PCI to SB Bridge (rev 01)
|
||||
Subsystem: Broadcom Corporation BCM4710 Sentry5 PCI to SB Bridge
|
||||
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
|
||||
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
|
||||
Latency: 64
|
||||
Interrupt: pin A routed to IRQ 6
|
||||
Region 0: Memory at 40000000 (32-bit, non-prefetchable) [size=8K]
|
||||
Region 1: Memory at <unassigned> (32-bit, prefetchable) [size=128M]
|
||||
|
||||
0000:01:08.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)
|
||||
Subsystem: Tekram Technology Co.,Ltd.: Unknown device 1603
|
||||
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
|
||||
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
|
||||
Latency: 64
|
||||
Interrupt: pin A routed to IRQ 6
|
||||
Region 0: Memory at 40002000 (32-bit, non-prefetchable) [size=8K]
|
||||
|
88
openwrt/docs/hardware/linksys/wrt54g_v11/nvram.txt
Normal file
88
openwrt/docs/hardware/linksys/wrt54g_v11/nvram.txt
Normal file
|
@ -0,0 +1,88 @@
|
|||
Intel_firmware_version=v1.41.8
|
||||
boardnum=42
|
||||
boardtype=bcm94710dev
|
||||
boot_date=Fri Sep 26 00:34:47 2003
|
||||
boot_ver=v1.5
|
||||
boot_wait=on
|
||||
clkfreq=125
|
||||
dl_ram_addr=a0001000
|
||||
et0macaddr=00:0C:41:B3:3C:55
|
||||
et0mdcport=0
|
||||
et0phyaddr=30
|
||||
et1macaddr=00:0C:41:B3:3C:56
|
||||
et1mdcport=1
|
||||
et1phyaddr=30
|
||||
firmware_version=v1.42.2
|
||||
flash_type=AMD 29lv320DT 2Mx16 TopB
|
||||
lan_ipaddr=192.168.1.1
|
||||
lan_netmask=255.255.255.0
|
||||
os_flash_addr=bfc40000
|
||||
os_ram_addr=80001000
|
||||
pmon_ver=PMON 3.31.15.0
|
||||
scratch=a0180000
|
||||
sdram_config=0x0000
|
||||
sdram_init=0x0419
|
||||
sdram_ncdl=0x00000000
|
||||
sdram_refresh=0x8040
|
||||
watchdog=5000
|
||||
wl0_active_mac=
|
||||
wl0_afterburner=auto
|
||||
wl0_afterburner_override=-1
|
||||
wl0_antdiv=-1
|
||||
wl0_ap_ip=
|
||||
wl0_ap_isolate=0
|
||||
wl0_ap_ssid=
|
||||
wl0_auth=0
|
||||
wl0_auth_mode=disabled
|
||||
wl0_bcn=100
|
||||
wl0_channel=6
|
||||
wl0_closed=0
|
||||
wl0_corerev=5
|
||||
wl0_country=Worldwide
|
||||
wl0_country_code=AU
|
||||
wl0_crypto=tkip
|
||||
wl0_dtim=1
|
||||
wl0_frag=2346
|
||||
wl0_frameburst=on
|
||||
wl0_gmode=1
|
||||
wl0_gmode_protection=auto
|
||||
wl0_hwaddr=00:0C:41:B3:3C:57
|
||||
wl0_ifname=eth2
|
||||
wl0_infra=1
|
||||
wl0_key1=
|
||||
wl0_key2=
|
||||
wl0_key3=
|
||||
wl0_key4=
|
||||
wl0_key=1
|
||||
wl0_lazywds=1
|
||||
wl0_mac_deny=
|
||||
wl0_mac_list=
|
||||
wl0_maclist=
|
||||
wl0_macmode1=disabled
|
||||
wl0_macmode=disabled
|
||||
wl0_mode=ap
|
||||
wl0_mrate=0
|
||||
wl0_net_mode=mixed
|
||||
wl0_passphrase=
|
||||
wl0_phytype=g
|
||||
wl0_phytypes=g
|
||||
wl0_plcphdr=long
|
||||
wl0_radio=1
|
||||
wl0_radioids=BCM2050
|
||||
wl0_radius_ipaddr=
|
||||
wl0_radius_key=
|
||||
wl0_radius_port=1812
|
||||
wl0_rate=0
|
||||
wl0_rateset=default
|
||||
wl0_rts=2347
|
||||
wl0_ssid=linksys
|
||||
wl0_unit=0
|
||||
wl0_wds=
|
||||
wl0_wep=off
|
||||
wl0_wep_bit=64
|
||||
wl0_wep_buf=
|
||||
wl0_wep_gen=
|
||||
wl0_wep_last=
|
||||
wl0_wpa_gtk_rekey=3600
|
||||
wl0_wpa_psk=
|
||||
wl_country_code=AU
|
56
openwrt/docs/hardware/linksys/wrt54g_v11/pci.txt
Normal file
56
openwrt/docs/hardware/linksys/wrt54g_v11/pci.txt
Normal file
|
@ -0,0 +1,56 @@
|
|||
PCI devices found:
|
||||
Bus 0, device 0, function 0:
|
||||
Class 0500: PCI device 14e4:0803 (rev 0).
|
||||
IRQ 6.
|
||||
Non-prefetchable 32 bit memory at 0x18000000 [0x18000fff].
|
||||
Non-prefetchable 32 bit memory at 0x0 [0x7ffffff].
|
||||
Non-prefetchable 32 bit memory at 0x10000000 [0x17ffffff].
|
||||
Non-prefetchable 32 bit memory at 0x80000000 [0xffffffff].
|
||||
Bus 0, device 1, function 0:
|
||||
Class 0200: PCI device 14e4:4711 (rev 0).
|
||||
IRQ 5.
|
||||
Non-prefetchable 32 bit memory at 0x18001000 [0x18001fff].
|
||||
Bus 0, device 2, function 0:
|
||||
Class 0200: PCI device 14e4:4713 (rev 0).
|
||||
IRQ 3.
|
||||
Master Capable. Latency=64.
|
||||
Non-prefetchable 32 bit memory at 0x18002000 [0x18002fff].
|
||||
Bus 0, device 3, function 0:
|
||||
Class 0703: PCI device 14e4:4712 (rev 0).
|
||||
IRQ 2.
|
||||
Non-prefetchable 32 bit memory at 0x18003000 [0x18003fff].
|
||||
Bus 0, device 4, function 0:
|
||||
Class 0c03: PCI device 14e4:4715 (rev 0).
|
||||
IRQ 2.
|
||||
Non-prefetchable 32 bit memory at 0x18004000 [0x18004fff].
|
||||
Bus 0, device 5, function 0:
|
||||
Class 0604: PCI device 14e4:0804 (rev 0).
|
||||
IRQ 6.
|
||||
Non-prefetchable 32 bit memory at 0x18005000 [0x18005fff].
|
||||
Non-prefetchable 32 bit memory at 0x8000000 [0xfffffff].
|
||||
Bus 0, device 6, function 0:
|
||||
Class 0b30: PCI device 14e4:0805 (rev 0).
|
||||
IRQ 6.
|
||||
Non-prefetchable 32 bit memory at 0x18006000 [0x18006fff].
|
||||
Non-prefetchable 32 bit memory at 0xff200000 [0xff3fffff].
|
||||
Bus 0, device 7, function 0:
|
||||
Class 0501: PCI device 14e4:0811 (rev 0).
|
||||
IRQ 2.
|
||||
Non-prefetchable 32 bit memory at 0x18007000 [0x18007fff].
|
||||
Non-prefetchable 32 bit memory at 0x1f000000 [0x1fffffff].
|
||||
Bus 0, device 8, function 0:
|
||||
Class 0200: PCI device 14e4:4713 (rev 0).
|
||||
IRQ 4.
|
||||
Master Capable. Latency=64.
|
||||
Non-prefetchable 32 bit memory at 0x18008000 [0x18008fff].
|
||||
Bus 1, device 0, function 0:
|
||||
Class 0600: PCI device 14e4:4710 (rev 1).
|
||||
IRQ 6.
|
||||
Master Capable. Latency=64.
|
||||
Non-prefetchable 32 bit memory at 0x40000000 [0x40001fff].
|
||||
Prefetchable 32 bit memory at 0x0 [0x7ffffff].
|
||||
Bus 1, device 8, function 0:
|
||||
Class 0280: PCI device 14e4:4320 (rev 3).
|
||||
IRQ 6.
|
||||
Master Capable. Latency=64.
|
||||
Non-prefetchable 32 bit memory at 0x40002000 [0x40003fff].
|
Loading…
Reference in a new issue