add etrax usb driver
SVN-Revision: 11039
This commit is contained in:
John Crispin
parent
1dce440fa5
commit
81f207d663
4 changed files with 4862 additions and 7 deletions
|
|
@ -147,9 +147,7 @@ CONFIG_ETRAX_SERIAL_PORT3_DMA5_IN=y
|
|||
CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS=1
|
||||
# CONFIG_ETRAX_SOFT_SHUTDOWN is not set
|
||||
# CONFIG_ETRAX_SYNCHRONOUS_SERIAL is not set
|
||||
CONFIG_ETRAX_USB_HOST=y
|
||||
CONFIG_ETRAX_USB_HOST_PORT1=y
|
||||
CONFIG_ETRAX_USB_HOST_PORT2=y
|
||||
# CONFIG_ETRAX_USB_HOST is not set
|
||||
# CONFIG_ETRAX_VCS_SIM is not set
|
||||
# CONFIG_ETRAX_WATCHDOG is not set
|
||||
CONFIG_FAT_FS=y
|
||||
|
|
@ -247,12 +245,8 @@ CONFIG_SLABINFO=y
|
|||
# CONFIG_SYSTEM_PROFILER is not set
|
||||
CONFIG_SYSVIPC_SYSCTL=y
|
||||
CONFIG_UID16=y
|
||||
CONFIG_USB=y
|
||||
# CONFIG_USB_ARCH_HAS_EHCI is not set
|
||||
# CONFIG_USB_ARCH_HAS_HCD is not set
|
||||
# CONFIG_USB_ARCH_HAS_OHCI is not set
|
||||
# CONFIG_USB_R8A66597_HCD is not set
|
||||
# CONFIG_USB_SERIAL_IR is not set
|
||||
CONFIG_USB_ZD1201=y
|
||||
CONFIG_VFAT_FS=y
|
||||
# CONFIG_VLAN_8021Q is not set
|
||||
|
|
|
|||
4550
target/linux/etrax/files/drivers/usb/host/hc_crisv10.c
Normal file
4550
target/linux/etrax/files/drivers/usb/host/hc_crisv10.c
Normal file
File diff suppressed because it is too large
Load diff
289
target/linux/etrax/files/drivers/usb/host/hc_crisv10.h
Normal file
289
target/linux/etrax/files/drivers/usb/host/hc_crisv10.h
Normal file
|
|
@ -0,0 +1,289 @@
|
|||
#ifndef __LINUX_ETRAX_USB_H
|
||||
#define __LINUX_ETRAX_USB_H
|
||||
|
||||
#include <linux/types.h>
|
||||
#include <linux/list.h>
|
||||
|
||||
typedef struct USB_IN_Desc {
|
||||
volatile __u16 sw_len;
|
||||
volatile __u16 command;
|
||||
volatile unsigned long next;
|
||||
volatile unsigned long buf;
|
||||
volatile __u16 hw_len;
|
||||
volatile __u16 status;
|
||||
} USB_IN_Desc_t;
|
||||
|
||||
typedef struct USB_SB_Desc {
|
||||
volatile __u16 sw_len;
|
||||
volatile __u16 command;
|
||||
volatile unsigned long next;
|
||||
volatile unsigned long buf;
|
||||
__u32 dummy;
|
||||
} USB_SB_Desc_t;
|
||||
|
||||
typedef struct USB_EP_Desc {
|
||||
volatile __u16 hw_len;
|
||||
volatile __u16 command;
|
||||
volatile unsigned long sub;
|
||||
volatile unsigned long next;
|
||||
__u32 dummy;
|
||||
} USB_EP_Desc_t;
|
||||
|
||||
struct virt_root_hub {
|
||||
int devnum;
|
||||
void *urb;
|
||||
void *int_addr;
|
||||
int send;
|
||||
int interval;
|
||||
int numports;
|
||||
struct timer_list rh_int_timer;
|
||||
volatile __u16 wPortChange_1;
|
||||
volatile __u16 wPortChange_2;
|
||||
volatile __u16 prev_wPortStatus_1;
|
||||
volatile __u16 prev_wPortStatus_2;
|
||||
};
|
||||
|
||||
struct etrax_usb_intr_traffic {
|
||||
int sleeping;
|
||||
int error;
|
||||
struct wait_queue *wq;
|
||||
};
|
||||
|
||||
typedef struct etrax_usb_hc {
|
||||
struct usb_bus *bus;
|
||||
struct virt_root_hub rh;
|
||||
struct etrax_usb_intr_traffic intr;
|
||||
} etrax_hc_t;
|
||||
|
||||
typedef enum {
|
||||
STARTED,
|
||||
NOT_STARTED,
|
||||
UNLINK,
|
||||
TRANSFER_DONE,
|
||||
WAITING_FOR_DESCR_INTR
|
||||
} etrax_usb_urb_state_t;
|
||||
|
||||
|
||||
|
||||
typedef struct etrax_usb_urb_priv {
|
||||
/* The first_sb field is used for freeing all SB descriptors belonging
|
||||
to an urb. The corresponding ep descriptor's sub pointer cannot be
|
||||
used for this since the DMA advances the sub pointer as it processes
|
||||
the sb list. */
|
||||
USB_SB_Desc_t *first_sb;
|
||||
/* The last_sb field referes to the last SB descriptor that belongs to
|
||||
this urb. This is important to know so we can free the SB descriptors
|
||||
that ranges between first_sb and last_sb. */
|
||||
USB_SB_Desc_t *last_sb;
|
||||
|
||||
/* The rx_offset field is used in ctrl and bulk traffic to keep track
|
||||
of the offset in the urb's transfer_buffer where incoming data should be
|
||||
copied to. */
|
||||
__u32 rx_offset;
|
||||
|
||||
/* Counter used in isochronous transfers to keep track of the
|
||||
number of packets received/transmitted. */
|
||||
__u32 isoc_packet_counter;
|
||||
|
||||
/* This field is used to pass information about the urb's current state between
|
||||
the various interrupt handlers (thus marked volatile). */
|
||||
volatile etrax_usb_urb_state_t urb_state;
|
||||
|
||||
/* Connection between the submitted urb and ETRAX epid number */
|
||||
__u8 epid;
|
||||
|
||||
/* The rx_data_list field is used for periodic traffic, to hold
|
||||
received data for later processing in the the complete_urb functions,
|
||||
where the data us copied to the urb's transfer_buffer. Basically, we
|
||||
use this intermediate storage because we don't know when it's safe to
|
||||
reuse the transfer_buffer (FIXME?). */
|
||||
struct list_head rx_data_list;
|
||||
} etrax_urb_priv_t;
|
||||
|
||||
/* This struct is for passing data from the top half to the bottom half. */
|
||||
typedef struct usb_interrupt_registers
|
||||
{
|
||||
etrax_hc_t *hc;
|
||||
__u32 r_usb_epid_attn;
|
||||
__u8 r_usb_status;
|
||||
__u16 r_usb_rh_port_status_1;
|
||||
__u16 r_usb_rh_port_status_2;
|
||||
__u32 r_usb_irq_mask_read;
|
||||
__u32 r_usb_fm_number;
|
||||
struct work_struct usb_bh;
|
||||
} usb_interrupt_registers_t;
|
||||
|
||||
/* This struct is for passing data from the isoc top half to the isoc bottom half. */
|
||||
typedef struct usb_isoc_complete_data
|
||||
{
|
||||
struct urb *urb;
|
||||
struct work_struct usb_bh;
|
||||
} usb_isoc_complete_data_t;
|
||||
|
||||
/* This struct holds data we get from the rx descriptors for DMA channel 9
|
||||
for periodic traffic (intr and isoc). */
|
||||
typedef struct rx_data
|
||||
{
|
||||
void *data;
|
||||
int length;
|
||||
struct list_head list;
|
||||
} rx_data_t;
|
||||
|
||||
typedef struct urb_entry
|
||||
{
|
||||
struct urb *urb;
|
||||
struct list_head list;
|
||||
} urb_entry_t;
|
||||
|
||||
/* ---------------------------------------------------------------------------
|
||||
Virtual Root HUB
|
||||
------------------------------------------------------------------------- */
|
||||
/* destination of request */
|
||||
#define RH_INTERFACE 0x01
|
||||
#define RH_ENDPOINT 0x02
|
||||
#define RH_OTHER 0x03
|
||||
|
||||
#define RH_CLASS 0x20
|
||||
#define RH_VENDOR 0x40
|
||||
|
||||
/* Requests: bRequest << 8 | bmRequestType */
|
||||
#define RH_GET_STATUS 0x0080
|
||||
#define RH_CLEAR_FEATURE 0x0100
|
||||
#define RH_SET_FEATURE 0x0300
|
||||
#define RH_SET_ADDRESS 0x0500
|
||||
#define RH_GET_DESCRIPTOR 0x0680
|
||||
#define RH_SET_DESCRIPTOR 0x0700
|
||||
#define RH_GET_CONFIGURATION 0x0880
|
||||
#define RH_SET_CONFIGURATION 0x0900
|
||||
#define RH_GET_STATE 0x0280
|
||||
#define RH_GET_INTERFACE 0x0A80
|
||||
#define RH_SET_INTERFACE 0x0B00
|
||||
#define RH_SYNC_FRAME 0x0C80
|
||||
/* Our Vendor Specific Request */
|
||||
#define RH_SET_EP 0x2000
|
||||
|
||||
|
||||
/* Hub port features */
|
||||
#define RH_PORT_CONNECTION 0x00
|
||||
#define RH_PORT_ENABLE 0x01
|
||||
#define RH_PORT_SUSPEND 0x02
|
||||
#define RH_PORT_OVER_CURRENT 0x03
|
||||
#define RH_PORT_RESET 0x04
|
||||
#define RH_PORT_POWER 0x08
|
||||
#define RH_PORT_LOW_SPEED 0x09
|
||||
#define RH_C_PORT_CONNECTION 0x10
|
||||
#define RH_C_PORT_ENABLE 0x11
|
||||
#define RH_C_PORT_SUSPEND 0x12
|
||||
#define RH_C_PORT_OVER_CURRENT 0x13
|
||||
#define RH_C_PORT_RESET 0x14
|
||||
|
||||
/* Hub features */
|
||||
#define RH_C_HUB_LOCAL_POWER 0x00
|
||||
#define RH_C_HUB_OVER_CURRENT 0x01
|
||||
|
||||
#define RH_DEVICE_REMOTE_WAKEUP 0x00
|
||||
#define RH_ENDPOINT_STALL 0x01
|
||||
|
||||
/* Our Vendor Specific feature */
|
||||
#define RH_REMOVE_EP 0x00
|
||||
|
||||
|
||||
#define RH_ACK 0x01
|
||||
#define RH_REQ_ERR -1
|
||||
#define RH_NACK 0x00
|
||||
|
||||
/* Field definitions for */
|
||||
|
||||
#define USB_IN_command__eol__BITNR 0 /* command macros */
|
||||
#define USB_IN_command__eol__WIDTH 1
|
||||
#define USB_IN_command__eol__no 0
|
||||
#define USB_IN_command__eol__yes 1
|
||||
|
||||
#define USB_IN_command__intr__BITNR 3
|
||||
#define USB_IN_command__intr__WIDTH 1
|
||||
#define USB_IN_command__intr__no 0
|
||||
#define USB_IN_command__intr__yes 1
|
||||
|
||||
#define USB_IN_status__eop__BITNR 1 /* status macros. */
|
||||
#define USB_IN_status__eop__WIDTH 1
|
||||
#define USB_IN_status__eop__no 0
|
||||
#define USB_IN_status__eop__yes 1
|
||||
|
||||
#define USB_IN_status__eot__BITNR 5
|
||||
#define USB_IN_status__eot__WIDTH 1
|
||||
#define USB_IN_status__eot__no 0
|
||||
#define USB_IN_status__eot__yes 1
|
||||
|
||||
#define USB_IN_status__error__BITNR 6
|
||||
#define USB_IN_status__error__WIDTH 1
|
||||
#define USB_IN_status__error__no 0
|
||||
#define USB_IN_status__error__yes 1
|
||||
|
||||
#define USB_IN_status__nodata__BITNR 7
|
||||
#define USB_IN_status__nodata__WIDTH 1
|
||||
#define USB_IN_status__nodata__no 0
|
||||
#define USB_IN_status__nodata__yes 1
|
||||
|
||||
#define USB_IN_status__epid__BITNR 8
|
||||
#define USB_IN_status__epid__WIDTH 5
|
||||
|
||||
#define USB_EP_command__eol__BITNR 0
|
||||
#define USB_EP_command__eol__WIDTH 1
|
||||
#define USB_EP_command__eol__no 0
|
||||
#define USB_EP_command__eol__yes 1
|
||||
|
||||
#define USB_EP_command__eof__BITNR 1
|
||||
#define USB_EP_command__eof__WIDTH 1
|
||||
#define USB_EP_command__eof__no 0
|
||||
#define USB_EP_command__eof__yes 1
|
||||
|
||||
#define USB_EP_command__intr__BITNR 3
|
||||
#define USB_EP_command__intr__WIDTH 1
|
||||
#define USB_EP_command__intr__no 0
|
||||
#define USB_EP_command__intr__yes 1
|
||||
|
||||
#define USB_EP_command__enable__BITNR 4
|
||||
#define USB_EP_command__enable__WIDTH 1
|
||||
#define USB_EP_command__enable__no 0
|
||||
#define USB_EP_command__enable__yes 1
|
||||
|
||||
#define USB_EP_command__hw_valid__BITNR 5
|
||||
#define USB_EP_command__hw_valid__WIDTH 1
|
||||
#define USB_EP_command__hw_valid__no 0
|
||||
#define USB_EP_command__hw_valid__yes 1
|
||||
|
||||
#define USB_EP_command__epid__BITNR 8
|
||||
#define USB_EP_command__epid__WIDTH 5
|
||||
|
||||
#define USB_SB_command__eol__BITNR 0 /* command macros. */
|
||||
#define USB_SB_command__eol__WIDTH 1
|
||||
#define USB_SB_command__eol__no 0
|
||||
#define USB_SB_command__eol__yes 1
|
||||
|
||||
#define USB_SB_command__eot__BITNR 1
|
||||
#define USB_SB_command__eot__WIDTH 1
|
||||
#define USB_SB_command__eot__no 0
|
||||
#define USB_SB_command__eot__yes 1
|
||||
|
||||
#define USB_SB_command__intr__BITNR 3
|
||||
#define USB_SB_command__intr__WIDTH 1
|
||||
#define USB_SB_command__intr__no 0
|
||||
#define USB_SB_command__intr__yes 1
|
||||
|
||||
#define USB_SB_command__tt__BITNR 4
|
||||
#define USB_SB_command__tt__WIDTH 2
|
||||
#define USB_SB_command__tt__zout 0
|
||||
#define USB_SB_command__tt__in 1
|
||||
#define USB_SB_command__tt__out 2
|
||||
#define USB_SB_command__tt__setup 3
|
||||
|
||||
|
||||
#define USB_SB_command__rem__BITNR 8
|
||||
#define USB_SB_command__rem__WIDTH 6
|
||||
|
||||
#define USB_SB_command__full__BITNR 6
|
||||
#define USB_SB_command__full__WIDTH 1
|
||||
#define USB_SB_command__full__no 0
|
||||
#define USB_SB_command__full__yes 1
|
||||
|
||||
#endif
|
||||
22
target/linux/etrax/patches/301-usb_support.patch
Normal file
22
target/linux/etrax/patches/301-usb_support.patch
Normal file
|
|
@ -0,0 +1,22 @@
|
|||
Index: linux-2.6.25.1/drivers/usb/Makefile
|
||||
===================================================================
|
||||
--- linux-2.6.25.1.orig/drivers/usb/Makefile 2008-05-03 21:33:11.000000000 +0100
|
||||
+++ linux-2.6.25.1/drivers/usb/Makefile 2008-05-03 21:33:17.000000000 +0100
|
||||
@@ -16,6 +16,7 @@
|
||||
obj-$(CONFIG_USB_SL811_HCD) += host/
|
||||
obj-$(CONFIG_USB_U132_HCD) += host/
|
||||
obj-$(CONFIG_USB_R8A66597_HCD) += host/
|
||||
+obj-$(CONFIG_ETRAX_USB_HOST) += host/
|
||||
|
||||
obj-$(CONFIG_USB_ACM) += class/
|
||||
obj-$(CONFIG_USB_PRINTER) += class/
|
||||
Index: linux-2.6.25.1/drivers/usb/host/Makefile
|
||||
===================================================================
|
||||
--- linux-2.6.25.1.orig/drivers/usb/host/Makefile 2008-05-03 21:33:24.000000000 +0100
|
||||
+++ linux-2.6.25.1/drivers/usb/host/Makefile 2008-05-03 21:33:47.000000000 +0100
|
||||
@@ -16,4 +16,4 @@
|
||||
obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o
|
||||
obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o
|
||||
obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o
|
||||
-
|
||||
+obj-$(CONFIG_ETRAX_ARCH_V10) += hc_crisv10.o
|
||||
Loading…
Reference in a new issue