kernel: refresh patches for 2.6.33.2, and drop md5sum for older 2.6.32 kernels

SVN-Revision: 21081
This commit is contained in:
Gabor Juhos 2010-04-22 07:12:09 +00:00
parent 8149815189
commit 81062a12ac
74 changed files with 339 additions and 427 deletions

View file

@ -23,12 +23,6 @@ endif
ifeq ($(LINUX_VERSION),2.6.32.11) ifeq ($(LINUX_VERSION),2.6.32.11)
LINUX_KERNEL_MD5SUM:=3709c691d909b4f8ca692edc6c726cb6 LINUX_KERNEL_MD5SUM:=3709c691d909b4f8ca692edc6c726cb6
endif endif
ifeq ($(LINUX_VERSION),2.6.33)
LINUX_KERNEL_MD5SUM:=c3883760b18d50e8d78819c54d579b00
endif
ifeq ($(LINUX_VERSION),2.6.33.1)
LINUX_KERNEL_MD5SUM:=73b514ec918b88a45656be191b1ee226
endif
ifeq ($(LINUX_VERSION),2.6.33.2) ifeq ($(LINUX_VERSION),2.6.33.2)
LINUX_KERNEL_MD5SUM:=80c5ff544b0ee4d9b5d8b8b89d4a0ef9 LINUX_KERNEL_MD5SUM:=80c5ff544b0ee4d9b5d8b8b89d4a0ef9
endif endif

View file

@ -1,6 +1,6 @@
--- a/arch/mips/Makefile --- a/arch/mips/Makefile
+++ b/arch/mips/Makefile +++ b/arch/mips/Makefile
@@ -166,6 +166,13 @@ ifeq (,$(findstring march=octeon, $(cfla @@ -168,6 +168,13 @@ ifeq (,$(findstring march=octeon, $(cfla
cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += -Wa,-march=octeon cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += -Wa,-march=octeon
endif endif

View file

@ -1,6 +1,6 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -467,6 +467,49 @@ @@ -467,6 +467,49 @@ static struct board_info __initdata boar
.has_ohci0 = 1, .has_ohci0 = 1,
}; };
@ -50,7 +50,7 @@
#endif #endif
/* /*
@@ -692,6 +735,7 @@ @@ -692,6 +735,7 @@ static const struct board_info __initdat
&board_DV201AMR, &board_DV201AMR,
&board_96348gw_a, &board_96348gw_a,
&board_rta1025w_16, &board_rta1025w_16,

View file

@ -1,6 +1,6 @@
--- linux-2.6.32.10.orig/drivers/net/bcm63xx_enet.c 2010-04-06 19:25:52.612158288 +0100 --- a/drivers/net/bcm63xx_enet.c
+++ linux-2.6.32.10/drivers/net/bcm63xx_enet.c 2010-04-07 21:40:26.991801424 +0100 +++ b/drivers/net/bcm63xx_enet.c
@@ -965,7 +965,9 @@ @@ -962,7 +962,9 @@ static int bcm_enet_open(struct net_devi
/* all set, enable mac and interrupts, start dma engine and /* all set, enable mac and interrupts, start dma engine and
* kick rx dma channel */ * kick rx dma channel */
wmb(); wmb();

View file

@ -1,6 +1,6 @@
--- a/fs/jffs2/Kconfig --- a/fs/jffs2/Kconfig
+++ b/fs/jffs2/Kconfig +++ b/fs/jffs2/Kconfig
@@ -139,6 +139,15 @@ @@ -139,6 +139,15 @@ config JFFS2_LZO
This feature was added in July, 2007. Say 'N' if you need This feature was added in July, 2007. Say 'N' if you need
compatibility with older bootloaders or kernels. compatibility with older bootloaders or kernels.
@ -18,7 +18,7 @@
depends on JFFS2_FS depends on JFFS2_FS
--- a/fs/jffs2/Makefile --- a/fs/jffs2/Makefile
+++ b/fs/jffs2/Makefile +++ b/fs/jffs2/Makefile
@@ -18,4 +18,7 @@ @@ -18,4 +18,7 @@ jffs2-$(CONFIG_JFFS2_RUBIN) += compr_rub
jffs2-$(CONFIG_JFFS2_RTIME) += compr_rtime.o jffs2-$(CONFIG_JFFS2_RTIME) += compr_rtime.o
jffs2-$(CONFIG_JFFS2_ZLIB) += compr_zlib.o jffs2-$(CONFIG_JFFS2_ZLIB) += compr_zlib.o
jffs2-$(CONFIG_JFFS2_LZO) += compr_lzo.o jffs2-$(CONFIG_JFFS2_LZO) += compr_lzo.o
@ -28,7 +28,7 @@
+CFLAGS_compr_lzma.o += -Iinclude/linux -Ilib/lzma +CFLAGS_compr_lzma.o += -Iinclude/linux -Ilib/lzma
--- a/fs/jffs2/compr.c --- a/fs/jffs2/compr.c
+++ b/fs/jffs2/compr.c +++ b/fs/jffs2/compr.c
@@ -319,6 +319,9 @@ @@ -319,6 +319,9 @@ int __init jffs2_compressors_init(void)
#ifdef CONFIG_JFFS2_LZO #ifdef CONFIG_JFFS2_LZO
jffs2_lzo_init(); jffs2_lzo_init();
#endif #endif
@ -38,7 +38,7 @@
/* Setting default compression mode */ /* Setting default compression mode */
#ifdef CONFIG_JFFS2_CMODE_NONE #ifdef CONFIG_JFFS2_CMODE_NONE
jffs2_compression_mode = JFFS2_COMPR_MODE_NONE; jffs2_compression_mode = JFFS2_COMPR_MODE_NONE;
@@ -342,6 +345,9 @@ @@ -342,6 +345,9 @@ int __init jffs2_compressors_init(void)
int jffs2_compressors_exit(void) int jffs2_compressors_exit(void)
{ {
/* Unregistering compressors */ /* Unregistering compressors */
@ -63,7 +63,7 @@
#define JFFS2_RUBINMIPS_DISABLED /* RUBINs will be used only */ #define JFFS2_RUBINMIPS_DISABLED /* RUBINs will be used only */
#define JFFS2_DYNRUBIN_DISABLED /* for decompression */ #define JFFS2_DYNRUBIN_DISABLED /* for decompression */
@@ -98,5 +98,9 @@ @@ -98,5 +98,9 @@ void jffs2_zlib_exit(void);
int jffs2_lzo_init(void); int jffs2_lzo_init(void);
void jffs2_lzo_exit(void); void jffs2_lzo_exit(void);
#endif #endif
@ -73,7 +73,7 @@
+#endif +#endif
#endif /* __JFFS2_COMPR_H__ */ #endif /* __JFFS2_COMPR_H__ */
--- a/fs/jffs2/compr_lzma.c --- /dev/null
+++ b/fs/jffs2/compr_lzma.c +++ b/fs/jffs2/compr_lzma.c
@@ -0,0 +1,128 @@ @@ -0,0 +1,128 @@
+/* +/*
@ -206,7 +206,7 @@
+} +}
--- a/fs/jffs2/super.c --- a/fs/jffs2/super.c
+++ b/fs/jffs2/super.c +++ b/fs/jffs2/super.c
@@ -254,14 +254,41 @@ @@ -254,14 +254,41 @@ static int __init init_jffs2_fs(void)
BUILD_BUG_ON(sizeof(struct jffs2_raw_inode) != 68); BUILD_BUG_ON(sizeof(struct jffs2_raw_inode) != 68);
BUILD_BUG_ON(sizeof(struct jffs2_raw_summary) != 32); BUILD_BUG_ON(sizeof(struct jffs2_raw_summary) != 32);
@ -261,7 +261,7 @@
/* Compatibility flags. */ /* Compatibility flags. */
#define JFFS2_COMPAT_MASK 0xc000 /* What do to if an unknown nodetype is found */ #define JFFS2_COMPAT_MASK 0xc000 /* What do to if an unknown nodetype is found */
#define JFFS2_NODE_ACCURATE 0x2000 #define JFFS2_NODE_ACCURATE 0x2000
--- a/include/linux/lzma.h --- /dev/null
+++ b/include/linux/lzma.h +++ b/include/linux/lzma.h
@@ -0,0 +1,62 @@ @@ -0,0 +1,62 @@
+#ifndef __LZMA_H__ +#ifndef __LZMA_H__
@ -326,7 +326,7 @@
+static ISzAlloc lzma_alloc = {p_lzma_malloc, p_lzma_free}; +static ISzAlloc lzma_alloc = {p_lzma_malloc, p_lzma_free};
+ +
+#endif +#endif
--- a/include/linux/lzma/LzFind.h --- /dev/null
+++ b/include/linux/lzma/LzFind.h +++ b/include/linux/lzma/LzFind.h
@@ -0,0 +1,115 @@ @@ -0,0 +1,115 @@
+/* LzFind.h -- Match finder for LZ algorithms +/* LzFind.h -- Match finder for LZ algorithms
@ -444,7 +444,7 @@
+#endif +#endif
+ +
+#endif +#endif
--- a/include/linux/lzma/LzHash.h --- /dev/null
+++ b/include/linux/lzma/LzHash.h +++ b/include/linux/lzma/LzHash.h
@@ -0,0 +1,54 @@ @@ -0,0 +1,54 @@
+/* LzHash.h -- HASH functions for LZ algorithms +/* LzHash.h -- HASH functions for LZ algorithms
@ -501,7 +501,7 @@
+ hash4Value = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)) & (kHash4Size - 1); } + hash4Value = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)) & (kHash4Size - 1); }
+ +
+#endif +#endif
--- a/include/linux/lzma/LzmaDec.h --- /dev/null
+++ b/include/linux/lzma/LzmaDec.h +++ b/include/linux/lzma/LzmaDec.h
@@ -0,0 +1,231 @@ @@ -0,0 +1,231 @@
+/* LzmaDec.h -- LZMA Decoder +/* LzmaDec.h -- LZMA Decoder
@ -735,7 +735,7 @@
+#endif +#endif
+ +
+#endif +#endif
--- a/include/linux/lzma/LzmaEnc.h --- /dev/null
+++ b/include/linux/lzma/LzmaEnc.h +++ b/include/linux/lzma/LzmaEnc.h
@@ -0,0 +1,80 @@ @@ -0,0 +1,80 @@
+/* LzmaEnc.h -- LZMA Encoder +/* LzmaEnc.h -- LZMA Encoder
@ -818,7 +818,7 @@
+#endif +#endif
+ +
+#endif +#endif
--- a/include/linux/lzma/Types.h --- /dev/null
+++ b/include/linux/lzma/Types.h +++ b/include/linux/lzma/Types.h
@@ -0,0 +1,226 @@ @@ -0,0 +1,226 @@
+/* Types.h -- Basic types +/* Types.h -- Basic types
@ -1049,7 +1049,7 @@
+#endif +#endif
--- a/lib/Kconfig --- a/lib/Kconfig
+++ b/lib/Kconfig +++ b/lib/Kconfig
@@ -103,6 +103,12 @@ @@ -103,6 +103,12 @@ config LZO_COMPRESS
config LZO_DECOMPRESS config LZO_DECOMPRESS
tristate tristate
@ -1081,7 +1081,7 @@
ifdef CONFIG_FUNCTION_TRACER ifdef CONFIG_FUNCTION_TRACER
ORIG_CFLAGS := $(KBUILD_CFLAGS) ORIG_CFLAGS := $(KBUILD_CFLAGS)
KBUILD_CFLAGS = $(subst -pg,,$(ORIG_CFLAGS)) KBUILD_CFLAGS = $(subst -pg,,$(ORIG_CFLAGS))
@@ -65,6 +75,8 @@ @@ -65,6 +75,8 @@ obj-$(CONFIG_ZLIB_DEFLATE) += zlib_defla
obj-$(CONFIG_REED_SOLOMON) += reed_solomon/ obj-$(CONFIG_REED_SOLOMON) += reed_solomon/
obj-$(CONFIG_LZO_COMPRESS) += lzo/ obj-$(CONFIG_LZO_COMPRESS) += lzo/
obj-$(CONFIG_LZO_DECOMPRESS) += lzo/ obj-$(CONFIG_LZO_DECOMPRESS) += lzo/
@ -1090,7 +1090,7 @@
lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o
lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o
--- a/lib/lzma/LzFind.c --- /dev/null
+++ b/lib/lzma/LzFind.c +++ b/lib/lzma/LzFind.c
@@ -0,0 +1,761 @@ @@ -0,0 +1,761 @@
+/* LzFind.c -- Match finder for LZ algorithms +/* LzFind.c -- Match finder for LZ algorithms
@ -1854,7 +1854,7 @@
+ vTable->Skip = (Mf_Skip_Func)Bt4_MatchFinder_Skip; + vTable->Skip = (Mf_Skip_Func)Bt4_MatchFinder_Skip;
+ } + }
+} +}
--- a/lib/lzma/LzmaDec.c --- /dev/null
+++ b/lib/lzma/LzmaDec.c +++ b/lib/lzma/LzmaDec.c
@@ -0,0 +1,999 @@ @@ -0,0 +1,999 @@
+/* LzmaDec.c -- LZMA Decoder +/* LzmaDec.c -- LZMA Decoder
@ -2856,7 +2856,7 @@
+ LzmaDec_FreeProbs(&p, alloc); + LzmaDec_FreeProbs(&p, alloc);
+ return res; + return res;
+} +}
--- a/lib/lzma/LzmaEnc.c --- /dev/null
+++ b/lib/lzma/LzmaEnc.c +++ b/lib/lzma/LzmaEnc.c
@@ -0,0 +1,2271 @@ @@ -0,0 +1,2271 @@
+/* LzmaEnc.c -- LZMA Encoder +/* LzmaEnc.c -- LZMA Encoder
@ -5130,7 +5130,7 @@
+ LzmaEnc_Destroy(p, alloc, allocBig); + LzmaEnc_Destroy(p, alloc, allocBig);
+ return res; + return res;
+} +}
--- a/lib/lzma/Makefile --- /dev/null
+++ b/lib/lzma/Makefile +++ b/lib/lzma/Makefile
@@ -0,0 +1,7 @@ @@ -0,0 +1,7 @@
+lzma_compress-objs := LzFind.o LzmaEnc.o +lzma_compress-objs := LzFind.o LzmaEnc.o

View file

@ -127,11 +127,10 @@
e = (struct ipt_entry *)(loc_cpu_entry + off); e = (struct ipt_entry *)(loc_cpu_entry + off);
if (copy_to_user(userptr + off if (copy_to_user(userptr + off
@@ -1001,6 +1041,14 @@ copy_entries_to_user(unsigned int total_ @@ -1002,6 +1042,14 @@ copy_entries_to_user(unsigned int total_
ret = -EFAULT;
goto free_counters; goto free_counters;
} }
+
+ flags = e->ip.flags & ~IPT_F_NO_DEF_MATCH; + flags = e->ip.flags & ~IPT_F_NO_DEF_MATCH;
+ if (copy_to_user(userptr + off + if (copy_to_user(userptr + off
+ + offsetof(struct ipt_entry, ip.flags), + + offsetof(struct ipt_entry, ip.flags),
@ -139,6 +138,7 @@
+ ret = -EFAULT; + ret = -EFAULT;
+ goto free_counters; + goto free_counters;
+ } + }
+
for (i = sizeof(struct ipt_entry); for (i = sizeof(struct ipt_entry);
i < e->target_offset; i < e->target_offset;
i += m->u.match_size) {

View file

@ -11038,14 +11038,14 @@
+ yaffs_UnpackTags2(tags, &pt); + yaffs_UnpackTags2(tags, &pt);
+ } + }
+ } + }
+
- if(tags && retval == -EBADMSG && tags->eccResult == YAFFS_ECC_RESULT_NO_ERROR)
- tags->eccResult = YAFFS_ECC_RESULT_UNFIXED;
+ if (localData) + if (localData)
+ yaffs_ReleaseTempBuffer(dev, data, __LINE__); + yaffs_ReleaseTempBuffer(dev, data, __LINE__);
- if(tags && retval == -EBADMSG && tags->eccResult == YAFFS_ECC_RESULT_NO_ERROR)
+ if (tags && retval == -EBADMSG && tags->eccResult == YAFFS_ECC_RESULT_NO_ERROR) + if (tags && retval == -EBADMSG && tags->eccResult == YAFFS_ECC_RESULT_NO_ERROR)
tags->eccResult = YAFFS_ECC_RESULT_UNFIXED; + tags->eccResult = YAFFS_ECC_RESULT_UNFIXED;
-
if (retval == 0) if (retval == 0)
return YAFFS_OK; return YAFFS_OK;
else else

View file

@ -18,7 +18,7 @@
error: error:
if (cb.msg) if (cb.msg)
@@ -728,7 +728,7 @@ swconfig_get_attr(struct sk_buff *skb, s @@ -732,7 +732,7 @@ swconfig_get_attr(struct sk_buff *skb, s
goto nla_put_failure; goto nla_put_failure;
swconfig_put_dev(dev); swconfig_put_dev(dev);

View file

@ -1,6 +1,6 @@
--- a/lib/Kconfig --- a/lib/Kconfig
+++ b/lib/Kconfig +++ b/lib/Kconfig
@@ -152,16 +152,16 @@ config REED_SOLOMON_DEC16 @@ -158,16 +158,16 @@ config REED_SOLOMON_DEC16
# Textsearch support is select'ed if needed # Textsearch support is select'ed if needed
# #
config TEXTSEARCH config TEXTSEARCH

View file

@ -1,8 +1,6 @@
Index: linux-2.6.33.2/arch/mips/kernel/traps.c --- a/arch/mips/kernel/traps.c
=================================================================== +++ b/arch/mips/kernel/traps.c
--- linux-2.6.33.2.orig/arch/mips/kernel/traps.c 2010-04-02 01:02:33.000000000 +0200 @@ -1496,7 +1496,18 @@ void __cpuinit per_cpu_trap_init(void)
+++ linux-2.6.33.2/arch/mips/kernel/traps.c 2010-04-02 23:36:16.000000000 +0200
@@ -1496,7 +1496,18 @@
if (cpu_has_mips_r2) { if (cpu_has_mips_r2) {
cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP; cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP;
cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7; cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7;
@ -21,11 +19,9 @@ Index: linux-2.6.33.2/arch/mips/kernel/traps.c
if (cp0_perfcount_irq == cp0_compare_irq) if (cp0_perfcount_irq == cp0_compare_irq)
cp0_perfcount_irq = -1; cp0_perfcount_irq = -1;
} else { } else {
Index: linux-2.6.33.2/arch/mips/include/asm/irq.h --- a/arch/mips/include/asm/irq.h
=================================================================== +++ b/arch/mips/include/asm/irq.h
--- linux-2.6.33.2.orig/arch/mips/include/asm/irq.h 2010-04-02 01:02:33.000000000 +0200 @@ -133,9 +133,11 @@ extern void free_irqno(unsigned int irq)
+++ linux-2.6.33.2/arch/mips/include/asm/irq.h 2010-04-02 23:37:14.000000000 +0200
@@ -133,9 +133,11 @@
* IE7. Since R2 their number has to be read from the c0_intctl register. * IE7. Since R2 their number has to be read from the c0_intctl register.
*/ */
#define CP0_LEGACY_COMPARE_IRQ 7 #define CP0_LEGACY_COMPARE_IRQ 7

View file

@ -1,7 +1,5 @@
Index: linux-2.6.32.10/arch/mips/kernel/cevt-r4k.c --- a/arch/mips/kernel/cevt-r4k.c
=================================================================== +++ b/arch/mips/kernel/cevt-r4k.c
--- linux-2.6.32.10.orig/arch/mips/kernel/cevt-r4k.c 2010-04-02 21:11:39.000000000 +0200
+++ linux-2.6.32.10/arch/mips/kernel/cevt-r4k.c 2010-04-02 21:11:52.000000000 +0200
@@ -22,6 +22,22 @@ @@ -22,6 +22,22 @@
#ifndef CONFIG_MIPS_MT_SMTC #ifndef CONFIG_MIPS_MT_SMTC
@ -25,7 +23,7 @@ Index: linux-2.6.32.10/arch/mips/kernel/cevt-r4k.c
static int mips_next_event(unsigned long delta, static int mips_next_event(unsigned long delta,
struct clock_event_device *evt) struct clock_event_device *evt)
{ {
@@ -31,6 +47,7 @@ @@ -31,6 +47,7 @@ static int mips_next_event(unsigned long
cnt = read_c0_count(); cnt = read_c0_count();
cnt += delta; cnt += delta;
write_c0_compare(cnt); write_c0_compare(cnt);

View file

@ -1,8 +1,6 @@
Index: linux-2.6.33.2/kernel/irq/chip.c --- a/kernel/irq/chip.c
=================================================================== +++ b/kernel/irq/chip.c
--- linux-2.6.33.2.orig/kernel/irq/chip.c 2010-04-02 01:02:33.000000000 +0200 @@ -650,6 +650,9 @@ handle_percpu_irq(unsigned int irq, stru
+++ linux-2.6.33.2/kernel/irq/chip.c 2010-04-02 23:37:40.000000000 +0200
@@ -650,6 +650,9 @@
kstat_incr_irqs_this_cpu(irq, desc); kstat_incr_irqs_this_cpu(irq, desc);

View file

@ -1,8 +1,6 @@
Index: linux-2.6.33.2/arch/mips/Kconfig --- a/arch/mips/Kconfig
=================================================================== +++ b/arch/mips/Kconfig
--- linux-2.6.33.2.orig/arch/mips/Kconfig 2010-04-02 23:31:00.000000000 +0200 @@ -139,6 +139,9 @@ config MACH_DECSTATION
+++ linux-2.6.33.2/arch/mips/Kconfig 2010-04-02 23:38:38.000000000 +0200
@@ -139,6 +139,9 @@
otherwise choose R3000. otherwise choose R3000.
@ -12,7 +10,7 @@ Index: linux-2.6.33.2/arch/mips/Kconfig
config MACH_JAZZ config MACH_JAZZ
bool "Jazz family of machines" bool "Jazz family of machines"
select ARC select ARC
@@ -693,6 +696,7 @@ @@ -693,6 +696,7 @@ source "arch/mips/txx9/Kconfig"
source "arch/mips/vr41xx/Kconfig" source "arch/mips/vr41xx/Kconfig"
source "arch/mips/cavium-octeon/Kconfig" source "arch/mips/cavium-octeon/Kconfig"
source "arch/mips/loongson/Kconfig" source "arch/mips/loongson/Kconfig"
@ -20,11 +18,9 @@ Index: linux-2.6.33.2/arch/mips/Kconfig
endmenu endmenu
Index: linux-2.6.33.2/arch/mips/Makefile --- a/arch/mips/Makefile
=================================================================== +++ b/arch/mips/Makefile
--- linux-2.6.33.2.orig/arch/mips/Makefile 2010-04-02 23:31:01.000000000 +0200 @@ -317,6 +317,18 @@ cflags-$(CONFIG_MIPS_COBALT) += -I$(srct
+++ linux-2.6.33.2/arch/mips/Makefile 2010-04-02 23:38:38.000000000 +0200
@@ -317,6 +317,18 @@
load-$(CONFIG_MIPS_COBALT) += 0xffffffff80080000 load-$(CONFIG_MIPS_COBALT) += 0xffffffff80080000
# #
@ -43,11 +39,9 @@ Index: linux-2.6.33.2/arch/mips/Makefile
# DECstation family # DECstation family
# #
core-$(CONFIG_MACH_DECSTATION) += arch/mips/dec/ core-$(CONFIG_MACH_DECSTATION) += arch/mips/dec/
Index: linux-2.6.33.2/arch/mips/pci/Makefile --- a/arch/mips/pci/Makefile
=================================================================== +++ b/arch/mips/pci/Makefile
--- linux-2.6.33.2.orig/arch/mips/pci/Makefile 2010-04-02 01:02:33.000000000 +0200 @@ -55,7 +55,7 @@ obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capc
+++ linux-2.6.33.2/arch/mips/pci/Makefile 2010-04-02 23:38:38.000000000 +0200
@@ -55,7 +55,7 @@
obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
obj-$(CONFIG_MIKROTIK_RB532) += pci-rc32434.o ops-rc32434.o fixup-rc32434.o obj-$(CONFIG_MIKROTIK_RB532) += pci-rc32434.o ops-rc32434.o fixup-rc32434.o
obj-$(CONFIG_CPU_CAVIUM_OCTEON) += pci-octeon.o pcie-octeon.o obj-$(CONFIG_CPU_CAVIUM_OCTEON) += pci-octeon.o pcie-octeon.o

View file

@ -1,8 +1,6 @@
Index: linux-2.6.33.2/drivers/serial/Kconfig --- a/drivers/serial/Kconfig
=================================================================== +++ b/drivers/serial/Kconfig
--- linux-2.6.33.2.orig/drivers/serial/Kconfig 2010-04-05 20:33:41.000000000 +0200 @@ -1383,6 +1383,14 @@ config SERIAL_OF_PLATFORM_NWPSERIAL_CONS
+++ linux-2.6.33.2/drivers/serial/Kconfig 2010-04-05 20:33:43.000000000 +0200
@@ -1383,6 +1383,14 @@
help help
Support for Console on the NWP serial ports. Support for Console on the NWP serial ports.
@ -17,20 +15,16 @@ Index: linux-2.6.33.2/drivers/serial/Kconfig
config SERIAL_QE config SERIAL_QE
tristate "Freescale QUICC Engine serial port support" tristate "Freescale QUICC Engine serial port support"
depends on QUICC_ENGINE depends on QUICC_ENGINE
Index: linux-2.6.33.2/drivers/serial/Makefile --- a/drivers/serial/Makefile
=================================================================== +++ b/drivers/serial/Makefile
--- linux-2.6.33.2.orig/drivers/serial/Makefile 2010-04-05 20:33:41.000000000 +0200 @@ -82,3 +82,4 @@ obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgd
+++ linux-2.6.33.2/drivers/serial/Makefile 2010-04-05 20:34:00.000000000 +0200
@@ -82,3 +82,4 @@
obj-$(CONFIG_SERIAL_QE) += ucc_uart.o obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
obj-$(CONFIG_SERIAL_TIMBERDALE) += timbuart.o obj-$(CONFIG_SERIAL_TIMBERDALE) += timbuart.o
obj-$(CONFIG_SERIAL_GRLIB_GAISLER_APBUART) += apbuart.o obj-$(CONFIG_SERIAL_GRLIB_GAISLER_APBUART) += apbuart.o
+obj-$(CONFIG_SERIAL_IFXMIPS) += ifxmips.o +obj-$(CONFIG_SERIAL_IFXMIPS) += ifxmips.o
Index: linux-2.6.33.2/drivers/net/Kconfig --- a/drivers/net/Kconfig
=================================================================== +++ b/drivers/net/Kconfig
--- linux-2.6.33.2.orig/drivers/net/Kconfig 2010-04-05 20:33:41.000000000 +0200 @@ -343,6 +343,12 @@ config MACB
+++ linux-2.6.33.2/drivers/net/Kconfig 2010-04-05 20:33:43.000000000 +0200
@@ -343,6 +343,12 @@
source "drivers/net/arm/Kconfig" source "drivers/net/arm/Kconfig"
@ -43,11 +37,9 @@ Index: linux-2.6.33.2/drivers/net/Kconfig
config AX88796 config AX88796
tristate "ASIX AX88796 NE2000 clone support" tristate "ASIX AX88796 NE2000 clone support"
depends on ARM || MIPS || SUPERH depends on ARM || MIPS || SUPERH
Index: linux-2.6.33.2/drivers/net/Makefile --- a/drivers/net/Makefile
=================================================================== +++ b/drivers/net/Makefile
--- linux-2.6.33.2.orig/drivers/net/Makefile 2010-04-05 20:33:41.000000000 +0200 @@ -247,6 +247,7 @@ pasemi_mac_driver-objs := pasemi_mac.o p
+++ linux-2.6.33.2/drivers/net/Makefile 2010-04-05 20:33:43.000000000 +0200
@@ -247,6 +247,7 @@
obj-$(CONFIG_MLX4_CORE) += mlx4/ obj-$(CONFIG_MLX4_CORE) += mlx4/
obj-$(CONFIG_ENC28J60) += enc28j60.o obj-$(CONFIG_ENC28J60) += enc28j60.o
obj-$(CONFIG_ETHOC) += ethoc.o obj-$(CONFIG_ETHOC) += ethoc.o
@ -55,11 +47,9 @@ Index: linux-2.6.33.2/drivers/net/Makefile
obj-$(CONFIG_XTENSA_XT2000_SONIC) += xtsonic.o obj-$(CONFIG_XTENSA_XT2000_SONIC) += xtsonic.o
Index: linux-2.6.33.2/drivers/mtd/maps/Kconfig --- a/drivers/mtd/maps/Kconfig
=================================================================== +++ b/drivers/mtd/maps/Kconfig
--- linux-2.6.33.2.orig/drivers/mtd/maps/Kconfig 2010-04-05 20:33:41.000000000 +0200 @@ -257,6 +257,12 @@ config MTD_ALCHEMY
+++ linux-2.6.33.2/drivers/mtd/maps/Kconfig 2010-04-05 20:33:43.000000000 +0200
@@ -257,6 +257,12 @@
help help
Flash memory access on AMD Alchemy Pb/Db/RDK Reference Boards Flash memory access on AMD Alchemy Pb/Db/RDK Reference Boards
@ -72,20 +62,16 @@ Index: linux-2.6.33.2/drivers/mtd/maps/Kconfig
config MTD_DILNETPC config MTD_DILNETPC
tristate "CFI Flash device mapped on DIL/Net PC" tristate "CFI Flash device mapped on DIL/Net PC"
depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT && BROKEN depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT && BROKEN
Index: linux-2.6.33.2/drivers/mtd/maps/Makefile --- a/drivers/mtd/maps/Makefile
=================================================================== +++ b/drivers/mtd/maps/Makefile
--- linux-2.6.33.2.orig/drivers/mtd/maps/Makefile 2010-04-05 20:33:41.000000000 +0200 @@ -61,3 +61,4 @@ obj-$(CONFIG_MTD_BFIN_ASYNC) += bfin-asy
+++ linux-2.6.33.2/drivers/mtd/maps/Makefile 2010-04-05 20:33:43.000000000 +0200
@@ -61,3 +61,4 @@
obj-$(CONFIG_MTD_RBTX4939) += rbtx4939-flash.o obj-$(CONFIG_MTD_RBTX4939) += rbtx4939-flash.o
obj-$(CONFIG_MTD_VMU) += vmu-flash.o obj-$(CONFIG_MTD_VMU) += vmu-flash.o
obj-$(CONFIG_MTD_GPIO_ADDR) += gpio-addr-flash.o obj-$(CONFIG_MTD_GPIO_ADDR) += gpio-addr-flash.o
+obj-$(CONFIG_MTD_IFXMIPS) += ifxmips.o +obj-$(CONFIG_MTD_IFXMIPS) += ifxmips.o
Index: linux-2.6.33.2/drivers/watchdog/Kconfig --- a/drivers/watchdog/Kconfig
=================================================================== +++ b/drivers/watchdog/Kconfig
--- linux-2.6.33.2.orig/drivers/watchdog/Kconfig 2010-04-05 20:33:41.000000000 +0200 @@ -840,6 +840,12 @@ config TXX9_WDT
+++ linux-2.6.33.2/drivers/watchdog/Kconfig 2010-04-05 20:33:43.000000000 +0200
@@ -840,6 +840,12 @@
help help
Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs. Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
@ -98,11 +84,9 @@ Index: linux-2.6.33.2/drivers/watchdog/Kconfig
# PARISC Architecture # PARISC Architecture
# POWERPC Architecture # POWERPC Architecture
Index: linux-2.6.33.2/drivers/watchdog/Makefile --- a/drivers/watchdog/Makefile
=================================================================== +++ b/drivers/watchdog/Makefile
--- linux-2.6.33.2.orig/drivers/watchdog/Makefile 2010-04-05 20:33:41.000000000 +0200 @@ -112,6 +112,7 @@ obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt
+++ linux-2.6.33.2/drivers/watchdog/Makefile 2010-04-05 20:33:43.000000000 +0200
@@ -112,6 +112,7 @@
obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
obj-$(CONFIG_AR7_WDT) += ar7_wdt.o obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
obj-$(CONFIG_TXX9_WDT) += txx9wdt.o obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
@ -110,11 +94,9 @@ Index: linux-2.6.33.2/drivers/watchdog/Makefile
# PARISC Architecture # PARISC Architecture
Index: linux-2.6.33.2/drivers/leds/Kconfig --- a/drivers/leds/Kconfig
=================================================================== +++ b/drivers/leds/Kconfig
--- linux-2.6.33.2.orig/drivers/leds/Kconfig 2010-04-05 20:33:41.000000000 +0200 @@ -269,6 +269,12 @@ config LEDS_ADP5520
+++ linux-2.6.33.2/drivers/leds/Kconfig 2010-04-05 20:33:43.000000000 +0200
@@ -269,6 +269,12 @@
To compile this driver as a module, choose M here: the module will To compile this driver as a module, choose M here: the module will
be called leds-adp5520. be called leds-adp5520.
@ -127,11 +109,9 @@ Index: linux-2.6.33.2/drivers/leds/Kconfig
comment "LED Triggers" comment "LED Triggers"
config LEDS_TRIGGERS config LEDS_TRIGGERS
Index: linux-2.6.33.2/drivers/leds/Makefile --- a/drivers/leds/Makefile
=================================================================== +++ b/drivers/leds/Makefile
--- linux-2.6.33.2.orig/drivers/leds/Makefile 2010-04-05 20:33:41.000000000 +0200 @@ -33,6 +33,7 @@ obj-$(CONFIG_LEDS_REGULATOR) += leds-re
+++ linux-2.6.33.2/drivers/leds/Makefile 2010-04-05 20:33:43.000000000 +0200
@@ -33,6 +33,7 @@
obj-$(CONFIG_LEDS_INTEL_SS4200) += leds-ss4200.o obj-$(CONFIG_LEDS_INTEL_SS4200) += leds-ss4200.o
obj-$(CONFIG_LEDS_LT3593) += leds-lt3593.o obj-$(CONFIG_LEDS_LT3593) += leds-lt3593.o
obj-$(CONFIG_LEDS_ADP5520) += leds-adp5520.o obj-$(CONFIG_LEDS_ADP5520) += leds-adp5520.o

View file

@ -1,7 +1,5 @@
Index: linux-2.6.33.2/drivers/mtd/chips/cfi_cmdset_0001.c --- a/drivers/mtd/chips/cfi_cmdset_0001.c
=================================================================== +++ b/drivers/mtd/chips/cfi_cmdset_0001.c
--- linux-2.6.33.2.orig/drivers/mtd/chips/cfi_cmdset_0001.c 2010-04-02 01:02:33.000000000 +0200
+++ linux-2.6.33.2/drivers/mtd/chips/cfi_cmdset_0001.c 2010-04-02 23:47:32.000000000 +0200
@@ -41,7 +41,11 @@ @@ -41,7 +41,11 @@
/* #define CMDSET0001_DISABLE_WRITE_SUSPEND */ /* #define CMDSET0001_DISABLE_WRITE_SUSPEND */
@ -15,7 +13,7 @@ Index: linux-2.6.33.2/drivers/mtd/chips/cfi_cmdset_0001.c
/* Intel chips */ /* Intel chips */
#define I82802AB 0x00ad #define I82802AB 0x00ad
@@ -1494,6 +1498,9 @@ @@ -1494,6 +1498,9 @@ static int __xipram do_write_oneword(str
int ret=0; int ret=0;
adr += chip->start; adr += chip->start;
@ -25,11 +23,9 @@ Index: linux-2.6.33.2/drivers/mtd/chips/cfi_cmdset_0001.c
switch (mode) { switch (mode) {
case FL_WRITING: case FL_WRITING:
Index: linux-2.6.33.2/drivers/mtd/chips/cfi_cmdset_0002.c --- a/drivers/mtd/chips/cfi_cmdset_0002.c
=================================================================== +++ b/drivers/mtd/chips/cfi_cmdset_0002.c
--- linux-2.6.33.2.orig/drivers/mtd/chips/cfi_cmdset_0002.c 2010-04-02 23:31:00.000000000 +0200 @@ -1068,7 +1068,9 @@ static int __xipram do_write_oneword(str
+++ linux-2.6.33.2/drivers/mtd/chips/cfi_cmdset_0002.c 2010-04-02 23:47:32.000000000 +0200
@@ -1068,7 +1068,9 @@
int retry_cnt = 0; int retry_cnt = 0;
adr += chip->start; adr += chip->start;

View file

@ -1,8 +1,6 @@
Index: linux-2.6.32.10/arch/mips/mm/cache.c --- a/arch/mips/mm/cache.c
=================================================================== +++ b/arch/mips/mm/cache.c
--- linux-2.6.32.10.orig/arch/mips/mm/cache.c 2010-03-15 16:52:04.000000000 +0100 @@ -52,6 +52,8 @@ void (*_dma_cache_wback)(unsigned long s
+++ linux-2.6.32.10/arch/mips/mm/cache.c 2010-04-02 21:18:51.000000000 +0200
@@ -52,6 +52,8 @@
void (*_dma_cache_inv)(unsigned long start, unsigned long size); void (*_dma_cache_inv)(unsigned long start, unsigned long size);
EXPORT_SYMBOL(_dma_cache_wback_inv); EXPORT_SYMBOL(_dma_cache_wback_inv);
@ -11,11 +9,9 @@ Index: linux-2.6.32.10/arch/mips/mm/cache.c
#endif /* CONFIG_DMA_NONCOHERENT */ #endif /* CONFIG_DMA_NONCOHERENT */
Index: linux-2.6.32.10/net/atm/proc.c --- a/net/atm/proc.c
=================================================================== +++ b/net/atm/proc.c
--- linux-2.6.32.10.orig/net/atm/proc.c 2010-03-15 16:52:04.000000000 +0100 @@ -152,7 +152,7 @@ static void *vcc_seq_next(struct seq_fil
+++ linux-2.6.32.10/net/atm/proc.c 2010-04-02 21:19:46.000000000 +0200
@@ -152,7 +152,7 @@
static void pvc_info(struct seq_file *seq, struct atm_vcc *vcc) static void pvc_info(struct seq_file *seq, struct atm_vcc *vcc)
{ {
static const char *const class_name[] = static const char *const class_name[] =
@ -24,11 +20,9 @@ Index: linux-2.6.32.10/net/atm/proc.c
static const char *const aal_name[] = { static const char *const aal_name[] = {
"---", "1", "2", "3/4", /* 0- 3 */ "---", "1", "2", "3/4", /* 0- 3 */
"???", "5", "???", "???", /* 4- 7 */ "???", "5", "???", "???", /* 4- 7 */
Index: linux-2.6.32.10/net/atm/common.c --- a/net/atm/common.c
=================================================================== +++ b/net/atm/common.c
--- linux-2.6.32.10.orig/net/atm/common.c 2010-03-15 16:52:04.000000000 +0100 @@ -56,12 +56,17 @@ static void vcc_remove_socket(struct soc
+++ linux-2.6.32.10/net/atm/common.c 2010-04-02 21:21:46.000000000 +0200
@@ -56,12 +56,17 @@
write_unlock_irq(&vcc_sklist_lock); write_unlock_irq(&vcc_sklist_lock);
} }

View file

@ -374,9 +374,9 @@
+MODULE_AUTHOR("Chris Lang"); +MODULE_AUTHOR("Chris Lang");
--- a/drivers/gpio/Kconfig --- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig
@@ -196,6 +196,14 @@ config GPIO_LANGWELL @@ -221,6 +221,14 @@ config GPIO_TIMBERDALE
help ---help---
Say Y here to support Intel Moorestown platform GPIO. Add support for the GPIO IP in the timberdale FPGA.
+config GPIO_GW_I2C_PLD +config GPIO_GW_I2C_PLD
+ tristate "Gateworks I2C PLD GPIO Expander" + tristate "Gateworks I2C PLD GPIO Expander"
@ -391,7 +391,7 @@
config GPIO_MAX7301 config GPIO_MAX7301
--- a/drivers/gpio/Makefile --- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile
@@ -19,3 +19,4 @@ obj-$(CONFIG_GPIO_XILINX) += xilinx_gpio @@ -22,3 +22,4 @@ obj-$(CONFIG_GPIO_CS5535) += cs5535-gpio
obj-$(CONFIG_GPIO_BT8XX) += bt8xxgpio.o obj-$(CONFIG_GPIO_BT8XX) += bt8xxgpio.o
obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o
obj-$(CONFIG_GPIO_WM831X) += wm831x-gpio.o obj-$(CONFIG_GPIO_WM831X) += wm831x-gpio.o

View file

@ -1,6 +1,6 @@
--- a/arch/arm/Kconfig --- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig +++ b/arch/arm/Kconfig
@@ -418,7 +418,6 @@ config ARCH_IXP4XX @@ -417,7 +417,6 @@ config ARCH_IXP4XX
select GENERIC_GPIO select GENERIC_GPIO
select GENERIC_TIME select GENERIC_TIME
select GENERIC_CLOCKEVENTS select GENERIC_CLOCKEVENTS
@ -109,7 +109,7 @@
void __init ixp4xx_pci_preinit(void) void __init ixp4xx_pci_preinit(void)
{ {
@@ -517,19 +529,35 @@ struct pci_bus * __devinit ixp4xx_scan_b @@ -513,19 +525,35 @@ struct pci_bus * __devinit ixp4xx_scan_b
int int
pci_set_dma_mask(struct pci_dev *dev, u64 mask) pci_set_dma_mask(struct pci_dev *dev, u64 mask)
{ {

View file

@ -189,7 +189,7 @@ Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
+MACHINE_END +MACHINE_END
--- a/arch/arm/mach-ixp4xx/ixdp425-pci.c --- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c +++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
@@ -66,7 +66,8 @@ struct hw_pci ixdp425_pci __initdata = { @@ -70,7 +70,8 @@ struct hw_pci ixdp425_pci __initdata = {
int __init ixdp425_pci_init(void) int __init ixdp425_pci_init(void)
{ {
if (machine_is_ixdp425() || machine_is_ixcdp1100() || if (machine_is_ixdp425() || machine_is_ixcdp1100() ||

View file

@ -154,7 +154,7 @@
+#endif +#endif
--- a/arch/arm/mach-ixp4xx/ixdp425-pci.c --- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c +++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
@@ -67,7 +67,7 @@ int __init ixdp425_pci_init(void) @@ -71,7 +71,7 @@ int __init ixdp425_pci_init(void)
{ {
if (machine_is_ixdp425() || machine_is_ixcdp1100() || if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
machine_is_ixdp465() || machine_is_kixrp435() || machine_is_ixdp465() || machine_is_kixrp435() ||

View file

@ -1,6 +1,6 @@
--- a/arch/arm/mach-ixp4xx/coyote-setup.c --- a/arch/arm/mach-ixp4xx/coyote-setup.c
+++ b/arch/arm/mach-ixp4xx/coyote-setup.c +++ b/arch/arm/mach-ixp4xx/coyote-setup.c
@@ -73,9 +73,37 @@ static struct platform_device coyote_uar @@ -82,9 +82,37 @@ static struct platform_device coyote_uar
.resource = &coyote_uart_resource, .resource = &coyote_uart_resource,
}; };

View file

@ -106,7 +106,7 @@
unsigned int type; /* If UPF_FIXED_TYPE */ unsigned int type; /* If UPF_FIXED_TYPE */
--- a/include/linux/serial_core.h --- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h +++ b/include/linux/serial_core.h
@@ -285,6 +285,7 @@ struct uart_port { @@ -288,6 +288,7 @@ struct uart_port {
#define UPIO_TSI (5) /* Tsi108/109 type IO */ #define UPIO_TSI (5) /* Tsi108/109 type IO */
#define UPIO_DWAPB (6) /* DesignWare APB UART */ #define UPIO_DWAPB (6) /* DesignWare APB UART */
#define UPIO_RM9000 (7) /* RM9000 type IO */ #define UPIO_RM9000 (7) /* RM9000 type IO */
@ -114,7 +114,7 @@
unsigned int read_status_mask; /* driver specific */ unsigned int read_status_mask; /* driver specific */
unsigned int ignore_status_mask; /* driver specific */ unsigned int ignore_status_mask; /* driver specific */
@@ -327,6 +328,7 @@ struct uart_port { @@ -330,6 +331,7 @@ struct uart_port {
unsigned int mctrl; /* current modem ctrl settings */ unsigned int mctrl; /* current modem ctrl settings */
unsigned int timeout; /* character-based timeout */ unsigned int timeout; /* character-based timeout */
@ -124,7 +124,7 @@
unsigned int custom_divisor; unsigned int custom_divisor;
--- a/drivers/serial/8250.c --- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c +++ b/drivers/serial/8250.c
@@ -409,6 +409,20 @@ @@ -409,6 +409,20 @@ static void mem_serial_out(struct uart_p
writeb(value, p->membase + offset); writeb(value, p->membase + offset);
} }
@ -145,7 +145,7 @@
static void mem32_serial_out(struct uart_port *p, int offset, int value) static void mem32_serial_out(struct uart_port *p, int offset, int value)
{ {
offset = map_8250_out_reg(p, offset) << p->regshift; offset = map_8250_out_reg(p, offset) << p->regshift;
@@ -502,6 +516,11 @@ @@ -502,6 +516,11 @@ static void set_io_from_upio(struct uart
p->serial_out = mem32_serial_out; p->serial_out = mem32_serial_out;
break; break;
@ -157,7 +157,7 @@
#ifdef CONFIG_SERIAL_8250_AU1X00 #ifdef CONFIG_SERIAL_8250_AU1X00
case UPIO_AU: case UPIO_AU:
p->serial_in = au_serial_in; p->serial_in = au_serial_in;
@@ -534,6 +553,7 @@ @@ -534,6 +553,7 @@ serial_out_sync(struct uart_8250_port *u
switch (p->iotype) { switch (p->iotype) {
case UPIO_MEM: case UPIO_MEM:
case UPIO_MEM32: case UPIO_MEM32:
@ -165,7 +165,7 @@
#ifdef CONFIG_SERIAL_8250_AU1X00 #ifdef CONFIG_SERIAL_8250_AU1X00
case UPIO_AU: case UPIO_AU:
#endif #endif
@@ -2450,6 +2470,7 @@ @@ -2450,6 +2470,7 @@ static int serial8250_request_std_resour
case UPIO_MEM32: case UPIO_MEM32:
case UPIO_MEM: case UPIO_MEM:
case UPIO_DWAPB: case UPIO_DWAPB:
@ -173,7 +173,7 @@
if (!up->port.mapbase) if (!up->port.mapbase)
break; break;
@@ -2487,6 +2508,7 @@ @@ -2487,6 +2508,7 @@ static void serial8250_release_std_resou
case UPIO_MEM32: case UPIO_MEM32:
case UPIO_MEM: case UPIO_MEM:
case UPIO_DWAPB: case UPIO_DWAPB:
@ -181,7 +181,7 @@
if (!up->port.mapbase) if (!up->port.mapbase)
break; break;
@@ -2964,6 +2986,7 @@ @@ -2964,6 +2986,7 @@ static int __devinit serial8250_probe(st
port.serial_in = p->serial_in; port.serial_in = p->serial_in;
port.serial_out = p->serial_out; port.serial_out = p->serial_out;
port.dev = &dev->dev; port.dev = &dev->dev;
@ -189,7 +189,7 @@
port.irqflags |= irqflag; port.irqflags |= irqflag;
ret = serial8250_register_port(&port); ret = serial8250_register_port(&port);
if (ret < 0) { if (ret < 0) {
@@ -3113,6 +3136,7 @@ @@ -3113,6 +3136,7 @@ int serial8250_register_port(struct uart
uart->port.iotype = port->iotype; uart->port.iotype = port->iotype;
uart->port.flags = port->flags | UPF_BOOT_AUTOCONF; uart->port.flags = port->flags | UPF_BOOT_AUTOCONF;
uart->port.mapbase = port->mapbase; uart->port.mapbase = port->mapbase;
@ -199,7 +199,7 @@
uart->port.dev = port->dev; uart->port.dev = port->dev;
--- a/drivers/serial/serial_core.c --- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c
@@ -2161,6 +2161,7 @@ uart_report_port(struct uart_driver *drv @@ -2144,6 +2144,7 @@ uart_report_port(struct uart_driver *drv
snprintf(address, sizeof(address), snprintf(address, sizeof(address),
"I/O 0x%lx offset 0x%x", port->iobase, port->hub6); "I/O 0x%lx offset 0x%x", port->iobase, port->hub6);
break; break;
@ -207,7 +207,7 @@
case UPIO_MEM: case UPIO_MEM:
case UPIO_MEM32: case UPIO_MEM32:
case UPIO_AU: case UPIO_AU:
@@ -2573,6 +2574,7 @@ int uart_match_port(struct uart_port *po @@ -2557,6 +2558,7 @@ int uart_match_port(struct uart_port *po
case UPIO_HUB6: case UPIO_HUB6:
return (port1->iobase == port2->iobase) && return (port1->iobase == port2->iobase) &&
(port1->hub6 == port2->hub6); (port1->hub6 == port2->hub6);

View file

@ -15,11 +15,11 @@
+#include <linux/i2c/at24.h> +#include <linux/i2c/at24.h>
+ +
#include <linux/i2c-gpio.h> #include <linux/i2c-gpio.h>
#include <asm/types.h> #include <asm/types.h>
@@ -29,6 +35,13 @@ #include <asm/setup.h>
#include <asm/mach/arch.h> @@ -31,6 +37,13 @@
#include <asm/mach/flash.h> #define AVILA_SDA_PIN 7
#define AVILA_SCL_PIN 6
+struct avila_board_info { +struct avila_board_info {
+ unsigned char *model; + unsigned char *model;
@ -31,7 +31,7 @@
static struct flash_platform_data avila_flash_data = { static struct flash_platform_data avila_flash_data = {
.map_name = "cfi_probe", .map_name = "cfi_probe",
.width = 2, .width = 2,
@@ -132,16 +145,181 @@ static struct platform_device avila_pata @@ -134,16 +147,181 @@ static struct platform_device avila_pata
.resource = avila_pata_resources, .resource = avila_pata_resources,
}; };
@ -213,7 +213,7 @@
avila_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); avila_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
avila_flash_resource.end = avila_flash_resource.end =
IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
@@ -159,7 +337,28 @@ static void __init avila_init(void) @@ -161,7 +339,28 @@ static void __init avila_init(void)
platform_device_register(&avila_pata); platform_device_register(&avila_pata);

View file

@ -6,9 +6,9 @@
+#include <linux/leds.h> +#include <linux/leds.h>
#include <linux/i2c-gpio.h> #include <linux/i2c-gpio.h>
#include <asm/types.h> #include <asm/types.h>
@@ -170,6 +171,72 @@ static struct platform_device avila_npec #include <asm/setup.h>
@@ -172,6 +173,72 @@ static struct platform_device avila_npec
.dev.platform_data = &avila_npec_data, .dev.platform_data = &avila_npec_data,
}; };
@ -81,7 +81,7 @@
static struct platform_device *avila_devices[] __initdata = { static struct platform_device *avila_devices[] __initdata = {
&avila_i2c_gpio, &avila_i2c_gpio,
&avila_flash, &avila_flash,
@@ -180,12 +247,16 @@ static void __init avila_gw23xx_setup(vo @@ -182,12 +249,16 @@ static void __init avila_gw23xx_setup(vo
{ {
platform_device_register(&avila_npeb_device); platform_device_register(&avila_npeb_device);
platform_device_register(&avila_npec_device); platform_device_register(&avila_npec_device);
@ -98,7 +98,7 @@
} }
static void __init avila_gw2345_setup(void) static void __init avila_gw2345_setup(void)
@@ -196,22 +267,30 @@ static void __init avila_gw2345_setup(vo @@ -198,22 +269,30 @@ static void __init avila_gw2345_setup(vo
avila_npec_data.phy = 5; /* port 5 of the KS8995 switch */ avila_npec_data.phy = 5; /* port 5 of the KS8995 switch */
platform_device_register(&avila_npec_device); platform_device_register(&avila_npec_device);
@ -129,7 +129,7 @@
} }
static void __init avila_gw2355_setup(void) static void __init avila_gw2355_setup(void)
@@ -222,11 +301,29 @@ static void __init avila_gw2355_setup(vo @@ -224,11 +303,29 @@ static void __init avila_gw2355_setup(vo
avila_npec_data.phy = 16; avila_npec_data.phy = 16;
platform_device_register(&avila_npec_device); platform_device_register(&avila_npec_device);

View file

@ -1,37 +1,5 @@
--- a/arch/arm/mach-ixp4xx/avila-setup.c --- a/arch/arm/mach-ixp4xx/avila-setup.c
+++ b/arch/arm/mach-ixp4xx/avila-setup.c +++ b/arch/arm/mach-ixp4xx/avila-setup.c
@@ -237,10 +237,28 @@ static struct platform_device avila_latc
.dev.platform_data = &avila_latch_leds_data,
};
+static struct resource avila_gpio_resources[] = {
+ {
+ .name = "gpio",
+ /* FIXME: gpio mask should be model specific */
+ .start = AVILA_GPIO_MASK,
+ .end = AVILA_GPIO_MASK,
+ .flags = 0,
+ },
+};
+
+static struct platform_device avila_gpio = {
+ .name = "GPIODEV",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(avila_gpio_resources),
+ .resource = avila_gpio_resources,
+};
+
static struct platform_device *avila_devices[] __initdata = {
&avila_i2c_gpio,
&avila_flash,
- &avila_uart
+ &avila_uart,
+ &avila_gpio,
};
static void __init avila_gw23xx_setup(void)
--- a/arch/arm/mach-ixp4xx/avila-setup.c
+++ b/arch/arm/mach-ixp4xx/avila-setup.c
@@ -38,6 +38,13 @@ @@ -38,6 +38,13 @@
#define AVILA_SDA_PIN 7 #define AVILA_SDA_PIN 7
#define AVILA_SCL_PIN 6 #define AVILA_SCL_PIN 6

View file

@ -8,7 +8,7 @@
#include <asm/types.h> #include <asm/types.h>
#include <asm/setup.h> #include <asm/setup.h>
#include <asm/memory.h> #include <asm/memory.h>
@@ -147,9 +148,41 @@ @@ -147,9 +148,41 @@ static struct platform_device gtwx5715_f
.resource = &gtwx5715_flash_resource, .resource = &gtwx5715_flash_resource,
}; };

View file

@ -1,6 +1,6 @@
--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c --- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c +++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
@@ -154,10 +154,37 @@ static struct platform_device gtwx5715_s @@ -179,10 +179,37 @@ static struct platform_device gtwx5715_s
}, },
}; };

View file

@ -50,7 +50,7 @@
--- a/arch/arm/Kconfig --- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig +++ b/arch/arm/Kconfig
@@ -418,6 +418,7 @@ config ARCH_IXP4XX @@ -417,6 +417,7 @@ config ARCH_IXP4XX
select GENERIC_GPIO select GENERIC_GPIO
select GENERIC_TIME select GENERIC_TIME
select GENERIC_CLOCKEVENTS select GENERIC_CLOCKEVENTS
@ -122,4 +122,4 @@
+#define gpio_cansleep __gpio_cansleep +#define gpio_cansleep __gpio_cansleep
extern int gpio_to_irq(int gpio); extern int gpio_to_irq(int gpio);
extern int irq_to_gpio(int gpio); extern int irq_to_gpio(unsigned int irq);

View file

@ -1,6 +1,6 @@
--- a/arch/arm/mach-ixp4xx/Kconfig --- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -180,6 +180,15 @@ @@ -180,6 +180,15 @@ config ARCH_PRPMC1100
PrPCM1100 Processor Mezanine Module. For more information on PrPCM1100 Processor Mezanine Module. For more information on
this platform, see <file:Documentation/arm/IXP4xx>. this platform, see <file:Documentation/arm/IXP4xx>.
@ -18,7 +18,7 @@
select PCI select PCI
--- a/arch/arm/mach-ixp4xx/Makefile --- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile
@@ -23,6 +23,7 @@ @@ -23,6 +23,7 @@ obj-pci-$(CONFIG_MACH_SIDEWINDER) += sid
obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o
obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o
obj-pci-$(CONFIG_MACH_AP1000) += ixdp425-pci.o obj-pci-$(CONFIG_MACH_AP1000) += ixdp425-pci.o
@ -26,7 +26,7 @@
obj-pci-$(CONFIG_MACH_TW5334) += tw5334-pci.o obj-pci-$(CONFIG_MACH_TW5334) += tw5334-pci.o
obj-pci-$(CONFIG_MACH_MI424WR) += mi424wr-pci.o obj-pci-$(CONFIG_MACH_MI424WR) += mi424wr-pci.o
obj-pci-$(CONFIG_MACH_USR8200) += usr8200-pci.o obj-pci-$(CONFIG_MACH_USR8200) += usr8200-pci.o
@@ -48,6 +49,7 @@ @@ -48,6 +49,7 @@ obj-$(CONFIG_MACH_SIDEWINDER) += sidewin
obj-$(CONFIG_MACH_COMPEX) += compex-setup.o obj-$(CONFIG_MACH_COMPEX) += compex-setup.o
obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o
obj-$(CONFIG_MACH_AP1000) += ap1000-setup.o obj-$(CONFIG_MACH_AP1000) += ap1000-setup.o
@ -36,7 +36,7 @@
obj-$(CONFIG_MACH_USR8200) += usr8200-setup.o obj-$(CONFIG_MACH_USR8200) += usr8200-setup.o
--- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h --- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h +++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
@@ -43,7 +43,7 @@ @@ -43,7 +43,7 @@ static __inline__ void __arch_decomp_set
if (machine_is_adi_coyote() || machine_is_gtwx5715() || if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
machine_is_gateway7001() || machine_is_wg302v2() || machine_is_gateway7001() || machine_is_wg302v2() ||
machine_is_pronghorn() || machine_is_pronghorn_metro() || machine_is_wrt300nv2() || machine_is_pronghorn() || machine_is_pronghorn_metro() || machine_is_wrt300nv2() ||
@ -45,7 +45,7 @@
uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS; uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
else else
uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS; uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
--- a/arch/arm/mach-ixp4xx/tw2662-pci.c --- /dev/null
+++ b/arch/arm/mach-ixp4xx/tw2662-pci.c +++ b/arch/arm/mach-ixp4xx/tw2662-pci.c
@@ -0,0 +1,68 @@ @@ -0,0 +1,68 @@
+/* +/*
@ -116,7 +116,7 @@
+} +}
+ +
+subsys_initcall(tw2662_pci_init); +subsys_initcall(tw2662_pci_init);
--- a/arch/arm/mach-ixp4xx/tw2662-setup.c --- /dev/null
+++ b/arch/arm/mach-ixp4xx/tw2662-setup.c +++ b/arch/arm/mach-ixp4xx/tw2662-setup.c
@@ -0,0 +1,208 @@ @@ -0,0 +1,208 @@
+/* +/*

View file

@ -1,6 +1,6 @@
--- a/arch/powerpc/boot/Makefile --- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile
@@ -72,7 +72,7 @@ src-plat := of.c cuboot-52xx.c cuboot-82 @@ -73,7 +73,7 @@ src-plat := of.c cuboot-52xx.c cuboot-82
cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c \ cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c \
cuboot-bamboo.c cuboot-mpc7448hpc2.c cuboot-taishan.c \ cuboot-bamboo.c cuboot-mpc7448hpc2.c cuboot-taishan.c \
fixed-head.S ep88xc.c ep405.c cuboot-c2k.c \ fixed-head.S ep88xc.c ep405.c cuboot-c2k.c \
@ -8,8 +8,8 @@
+ cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c rb600.c \ + cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c rb600.c \
cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \ cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \ virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
cuboot-acadia.c cuboot-amigaone.c cuboot-acadia.c cuboot-amigaone.c cuboot-kilauea.c \
@@ -229,6 +229,7 @@ image-$(CONFIG_MPC834x_ITX) += cuImage. @@ -232,6 +232,7 @@ image-$(CONFIG_MPC834x_ITX) += cuImage.
image-$(CONFIG_MPC834x_MDS) += cuImage.mpc834x_mds image-$(CONFIG_MPC834x_MDS) += cuImage.mpc834x_mds
image-$(CONFIG_MPC836x_MDS) += cuImage.mpc836x_mds image-$(CONFIG_MPC836x_MDS) += cuImage.mpc836x_mds
image-$(CONFIG_ASP834x) += dtbImage.asp834x-redboot image-$(CONFIG_ASP834x) += dtbImage.asp834x-redboot

View file

@ -1,4 +1,4 @@
--- a/arch/powerpc/boot/dts/rb600.dts --- /dev/null
+++ b/arch/powerpc/boot/dts/rb600.dts +++ b/arch/powerpc/boot/dts/rb600.dts
@@ -0,0 +1,242 @@ @@ -0,0 +1,242 @@
+/* +/*

View file

@ -1,4 +1,4 @@
--- a/arch/powerpc/boot/rb600.c --- /dev/null
+++ b/arch/powerpc/boot/rb600.c +++ b/arch/powerpc/boot/rb600.c
@@ -0,0 +1,80 @@ @@ -0,0 +1,80 @@
+/* +/*

View file

@ -1,6 +1,6 @@
--- a/arch/powerpc/boot/wrapper --- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper
@@ -201,7 +201,7 @@ ps3) @@ -205,7 +205,7 @@ ps3)
isection=.kernel:initrd isection=.kernel:initrd
link_address='' link_address=''
;; ;;

View file

@ -1,6 +1,6 @@
--- a/arch/powerpc/kernel/Makefile --- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile
@@ -97,9 +97,11 @@ obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += f @@ -105,9 +105,11 @@ obj32-$(CONFIG_PPC_PERF_CTRS) += mpc7450
obj-$(CONFIG_8XX_MINIMAL_FPEMU) += softemu8xx.o obj-$(CONFIG_8XX_MINIMAL_FPEMU) += softemu8xx.o
@ -11,4 +11,4 @@
+endif +endif
obj-$(CONFIG_PPC64) += $(obj64-y) obj-$(CONFIG_PPC64) += $(obj64-y)
obj-$(CONFIG_PPC32) += $(obj32-y)

View file

@ -1,6 +1,6 @@
--- a/arch/powerpc/platforms/Kconfig --- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig
@@ -142,6 +142,10 @@ config GENERIC_IOMAP @@ -147,6 +147,10 @@ config GENERIC_IOMAP
bool bool
default n default n

View file

@ -1,6 +1,6 @@
--- a/arch/powerpc/sysdev/Makefile --- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile
@@ -50,3 +50,5 @@ obj-$(CONFIG_UCODE_PATCH) += micropatch. @@ -57,3 +57,5 @@ obj-$(CONFIG_PPC_MPC52xx) += mpc5xxx_clo
ifeq ($(CONFIG_SUSPEND),y) ifeq ($(CONFIG_SUSPEND),y)
obj-$(CONFIG_6xx) += 6xx-suspend.o obj-$(CONFIG_6xx) += 6xx-suspend.o
endif endif

View file

@ -1,4 +1,4 @@
--- a/arch/powerpc/sysdev/rb_iomap.c --- /dev/null
+++ b/arch/powerpc/sysdev/rb_iomap.c +++ b/arch/powerpc/sysdev/rb_iomap.c
@@ -0,0 +1,223 @@ @@ -0,0 +1,223 @@
+#include <linux/init.h> +#include <linux/init.h>

View file

@ -1,8 +1,8 @@
--- a/drivers/ata/Kconfig --- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig
@@ -734,5 +734,12 @@ config PATA_BF54X @@ -799,5 +799,12 @@ config PATA_MACIO
different chipsets, though generally, MacIO is one of them.
If unsure, say N.
+config PATA_RB_PPC +config PATA_RB_PPC
+ tristate "MikroTik RB600 PATA support" + tristate "MikroTik RB600 PATA support"

View file

@ -1,7 +1,7 @@
--- a/drivers/ata/Makefile --- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile +++ b/drivers/ata/Makefile
@@ -73,6 +73,7 @@ obj-$(CONFIG_PATA_OCTEON_CF) += pata_oct @@ -79,6 +79,7 @@ obj-$(CONFIG_PATA_PLATFORM) += pata_plat
obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o obj-$(CONFIG_PATA_AT91) += pata_at91.o
obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o
obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o
+obj-$(CONFIG_PATA_RB_PPC) += pata_rbppc_cf.o +obj-$(CONFIG_PATA_RB_PPC) += pata_rbppc_cf.o

View file

@ -1,4 +1,4 @@
--- a/drivers/ata/pata_rbppc_cf.c --- /dev/null
+++ b/drivers/ata/pata_rbppc_cf.c +++ b/drivers/ata/pata_rbppc_cf.c
@@ -0,0 +1,701 @@ @@ -0,0 +1,701 @@
+/* +/*

View file

@ -1,6 +1,6 @@
--- a/drivers/mtd/nand/Kconfig --- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig
@@ -380,6 +380,13 @@ config MTD_NAND_PLATFORM @@ -409,6 +409,13 @@ config MTD_NAND_PLATFORM
devices. You will need to provide platform-specific functions devices. You will need to provide platform-specific functions
via platform_data. via platform_data.

View file

@ -1,6 +1,6 @@
--- a/drivers/mtd/nand/Makefile --- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) += @@ -30,6 +30,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270) += cmx27
obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o
obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o
obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o

View file

@ -1,4 +1,4 @@
--- a/drivers/mtd/nand/rbppc_nand.c --- /dev/null
+++ b/drivers/mtd/nand/rbppc_nand.c +++ b/drivers/mtd/nand/rbppc_nand.c
@@ -0,0 +1,252 @@ @@ -0,0 +1,252 @@
+/* +/*

View file

@ -1,4 +1,4 @@
--- a/arch/powerpc/platforms/83xx/rbppc.c --- /dev/null
+++ b/arch/powerpc/platforms/83xx/rbppc.c +++ b/arch/powerpc/platforms/83xx/rbppc.c
@@ -0,0 +1,316 @@ @@ -0,0 +1,316 @@
+/* +/*

View file

@ -30,7 +30,7 @@
treeImage.* treeImage.*
--- a/arch/powerpc/boot/Makefile --- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile
@@ -308,6 +308,9 @@ $(obj)/zImage.iseries: vmlinux @@ -311,6 +311,9 @@ $(obj)/zImage.iseries: vmlinux
$(obj)/uImage: vmlinux $(wrapperbits) $(obj)/uImage: vmlinux $(wrapperbits)
$(call if_changed,wrap,uboot) $(call if_changed,wrap,uboot)
@ -40,7 +40,7 @@
$(obj)/cuImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits) $(obj)/cuImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
$(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz) $(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
@@ -347,7 +350,7 @@ install: $(CONFIGURE) $(addprefix $(obj) @@ -350,7 +353,7 @@ install: $(CONFIGURE) $(addprefix $(obj)
# anything not in $(targets) # anything not in $(targets)
clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \ clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \
@ -70,7 +70,7 @@
# miboot and U-boot want just the bare bits, not an ELF binary # miboot and U-boot want just the bare bits, not an ELF binary
ext=bin ext=bin
objflags="-O binary" objflags="-O binary"
@@ -273,6 +276,21 @@ uboot) @@ -277,6 +280,21 @@ uboot)
fi fi
exit 0 exit 0
;; ;;

View file

@ -6,7 +6,7 @@
* Copyright (C) 2008-2009 Noah Fontes <nfontes@transtruct.org> * Copyright (C) 2008-2009 Noah Fontes <nfontes@transtruct.org>
* Copyright (C) 2009 Michael Guntsche <mike@it-loops.com> * Copyright (C) 2009 Michael Guntsche <mike@it-loops.com>
* Copyright (C) Mikrotik 2007 * Copyright (C) Mikrotik 2007
@@ -167,6 +168,9 @@ @@ -167,6 +168,9 @@ static int __init rbppc_probe(void)
if (!model) if (!model)
return 0; return 0;
@ -16,7 +16,7 @@
if (strcmp(model, "RB600") == 0) if (strcmp(model, "RB600") == 0)
return 1; return 1;
@@ -227,6 +231,9 @@ @@ -227,6 +231,9 @@ static void __init rbppc_beeper_init(str
#define SBIT(x) (0x80000000 >> (x)) #define SBIT(x) (0x80000000 >> (x))
#define DBIT(x, y) ((y) << (32 - (((x % 16) + 1) * 2))) #define DBIT(x, y) ((y) << (32 - (((x % 16) + 1) * 2)))
@ -26,7 +26,7 @@
#define SICRL_RB600(x) ((x) + (0x114 >> 2)) #define SICRL_RB600(x) ((x) + (0x114 >> 2))
#define GPIO_DIR_RB600(x) ((x) + (0xc00 >> 2)) #define GPIO_DIR_RB600(x) ((x) + (0xc00 >> 2))
#define GPIO_DATA_RB600(x) ((x) + (0xc08 >> 2)) #define GPIO_DATA_RB600(x) ((x) + (0xc08 >> 2))
@@ -234,14 +241,38 @@ @@ -234,14 +241,38 @@ static void __init rbppc_beeper_init(str
static void rbppc_restart(char *cmd) static void rbppc_restart(char *cmd)
{ {
__be32 __iomem *reg; __be32 __iomem *reg;
@ -73,7 +73,7 @@
} }
static void rbppc_halt(void) static void rbppc_halt(void)
@@ -301,10 +332,10 @@ @@ -301,10 +332,10 @@ static int __init rbppc_declare_of_platf
return 0; return 0;
} }
@ -86,7 +86,7 @@
.probe = rbppc_probe, .probe = rbppc_probe,
.setup_arch = rbppc_setup_arch, .setup_arch = rbppc_setup_arch,
.init_IRQ = rbppc_init_IRQ, .init_IRQ = rbppc_init_IRQ,
@@ -314,3 +345,31 @@ @@ -314,3 +345,31 @@ define_machine(rb600) {
.time_init = mpc83xx_time_init, .time_init = mpc83xx_time_init,
.calibrate_decr = generic_calibrate_decr, .calibrate_decr = generic_calibrate_decr,
}; };
@ -118,9 +118,9 @@
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, fixup_pcibridge) +DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, fixup_pcibridge)
+DECLARE_PCI_FIXUP_HEADER(0x3388, 0x0021, fixup_rb604) +DECLARE_PCI_FIXUP_HEADER(0x3388, 0x0021, fixup_rb604)
+ +
--- a/drivers/mtd/nand/Kconfig 2010-03-19 12:30:12.000000000 +0200 --- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig 2010-03-19 12:30:28.000000000 +0200 +++ b/drivers/mtd/nand/Kconfig
@@ -387,11 +387,11 @@ @@ -410,11 +410,11 @@ config MTD_NAND_PLATFORM
via platform_data. via platform_data.
config MTD_NAND_RB_PPC config MTD_NAND_RB_PPC
@ -134,9 +134,9 @@
config MTD_ALAUDA config MTD_ALAUDA
tristate "MTD driver for Olympus MAUSB-10 and Fujifilm DPC-R1" tristate "MTD driver for Olympus MAUSB-10 and Fujifilm DPC-R1"
--- a/drivers/mtd/nand/rbppc_nand.c 2010-03-19 12:43:48.000000000 +0200 --- a/drivers/mtd/nand/rbppc_nand.c
+++ b/drivers/mtd/nand/rbppc_nand.c 2010-03-19 12:44:17.000000000 +0200 +++ b/drivers/mtd/nand/rbppc_nand.c
@@ -126,7 +126,7 @@ @@ -126,7 +126,7 @@ static int rbppc_nand_probe(struct of_de
void *baddr; void *baddr;
const unsigned *rdy, *nce, *cle, *ale; const unsigned *rdy, *nce, *cle, *ale;
@ -145,7 +145,7 @@
info = kmalloc(sizeof(*info), GFP_KERNEL); info = kmalloc(sizeof(*info), GFP_KERNEL);
@@ -244,7 +244,7 @@ @@ -244,7 +244,7 @@ static void __exit rbppc_nand_exit(void)
MODULE_AUTHOR("Mikrotikls SIA"); MODULE_AUTHOR("Mikrotikls SIA");
MODULE_AUTHOR("Noah Fontes"); MODULE_AUTHOR("Noah Fontes");
MODULE_AUTHOR("Michael Guntsche"); MODULE_AUTHOR("Michael Guntsche");
@ -154,9 +154,9 @@
MODULE_LICENSE("GPL"); MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION); MODULE_VERSION(DRV_VERSION);
--- a/arch/powerpc/platforms/83xx/Kconfig 2010-03-19 12:47:36.000000000 +0200 --- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig 2010-03-19 12:50:07.000000000 +0200 +++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -31,9 +31,10 @@ @@ -31,13 +31,14 @@ config MPC832x_RDB
This option enables support for the MPC8323 RDB board. This option enables support for the MPC8323 RDB board.
config RB_PPC config RB_PPC
@ -168,18 +168,14 @@
select PPC_MPC834x select PPC_MPC834x
select RB_IOMAP select RB_IOMAP
help help
@@ -38,7 +38,7 @@
select PPC_MPC834x
select RB_IOMAP
help
- This option enables support for MikroTik RouterBOARD 600 series boards. - This option enables support for MikroTik RouterBOARD 600 series boards.
+ This option enables support for MikroTik RouterBOARD 333/600 series boards. + This option enables support for MikroTik RouterBOARD 333/600 series boards.
config MPC834x_MDS config MPC834x_MDS
bool "Freescale MPC834x MDS" bool "Freescale MPC834x MDS"
--- a/arch/powerpc/boot/Makefile 2010-03-18 21:32:32.000000000 +0200 --- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile 2010-03-18 21:32:53.000000000 +0200 +++ b/arch/powerpc/boot/Makefile
@@ -72,7 +72,7 @@ @@ -73,7 +73,7 @@ src-plat := of.c cuboot-52xx.c cuboot-82
cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c \ cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c \
cuboot-bamboo.c cuboot-mpc7448hpc2.c cuboot-taishan.c \ cuboot-bamboo.c cuboot-mpc7448hpc2.c cuboot-taishan.c \
fixed-head.S ep88xc.c ep405.c cuboot-c2k.c \ fixed-head.S ep88xc.c ep405.c cuboot-c2k.c \
@ -187,8 +183,8 @@
+ cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c rb600.c rb333.c \ + cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c rb600.c rb333.c \
cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \ cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \ virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
cuboot-acadia.c cuboot-amigaone.c cuboot-acadia.c cuboot-amigaone.c cuboot-kilauea.c \
@@ -229,7 +229,8 @@ @@ -232,7 +232,8 @@ image-$(CONFIG_MPC834x_ITX) += cuImage.
image-$(CONFIG_MPC834x_MDS) += cuImage.mpc834x_mds image-$(CONFIG_MPC834x_MDS) += cuImage.mpc834x_mds
image-$(CONFIG_MPC836x_MDS) += cuImage.mpc836x_mds image-$(CONFIG_MPC836x_MDS) += cuImage.mpc836x_mds
image-$(CONFIG_ASP834x) += dtbImage.asp834x-redboot image-$(CONFIG_ASP834x) += dtbImage.asp834x-redboot
@ -198,9 +194,9 @@
# Board ports in arch/powerpc/platform/85xx/Kconfig # Board ports in arch/powerpc/platform/85xx/Kconfig
image-$(CONFIG_MPC8540_ADS) += cuImage.mpc8540ads image-$(CONFIG_MPC8540_ADS) += cuImage.mpc8540ads
--- a/arch/powerpc/boot/wrapper 2010-03-18 21:34:24.000000000 +0200 --- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper 2010-03-18 21:34:45.000000000 +0200 +++ b/arch/powerpc/boot/wrapper
@@ -201,7 +201,7 @@ @@ -208,7 +208,7 @@ ps3)
isection=.kernel:initrd isection=.kernel:initrd
link_address='' link_address=''
;; ;;

View file

@ -1,4 +1,4 @@
--- a/arch/powerpc/boot/dts/rb333.dts --- /dev/null
+++ b/arch/powerpc/boot/dts/rb333.dts +++ b/arch/powerpc/boot/dts/rb333.dts
@@ -0,0 +1,432 @@ @@ -0,0 +1,432 @@
+ +

View file

@ -1,4 +1,4 @@
--- a/arch/powerpc/boot/rb333.c --- /dev/null
+++ b/arch/powerpc/boot/rb333.c +++ b/arch/powerpc/boot/rb333.c
@@ -0,0 +1,73 @@ @@ -0,0 +1,73 @@
+/* +/*

View file

@ -1,6 +1,6 @@
--- a/arch/powerpc/boot/wrapper --- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper
@@ -138,7 +138,7 @@ @@ -145,7 +145,7 @@ objflags=-S
tmp=$tmpdir/zImage.$$.o tmp=$tmpdir/zImage.$$.o
ksection=.kernel:vmlinux.strip ksection=.kernel:vmlinux.strip
isection=.kernel:initrd isection=.kernel:initrd

View file

@ -1,7 +1,7 @@
--- a/arch/powerpc/platforms/83xx/rbppc.c --- a/arch/powerpc/platforms/83xx/rbppc.c
+++ b/arch/powerpc/platforms/83xx/rbppc.c +++ b/arch/powerpc/platforms/83xx/rbppc.c
@@ -121,21 +121,16 @@ @@ -121,21 +121,16 @@ static void __init rbppc_setup_arch(void
#endif #endif
#ifdef CONFIG_QUICC_ENGINE #ifdef CONFIG_QUICC_ENGINE
@ -32,7 +32,7 @@
} }
@@ -151,12 +146,16 @@ @@ -151,12 +146,16 @@ void __init rbppc_init_IRQ(void)
} }
#ifdef CONFIG_QUICC_ENGINE #ifdef CONFIG_QUICC_ENGINE
@ -55,7 +55,7 @@
} }
static int __init rbppc_probe(void) static int __init rbppc_probe(void)
@@ -284,6 +283,8 @@ @@ -284,6 +283,8 @@ static struct of_device_id rbppc_ids[] =
{ .type = "soc", }, { .type = "soc", },
{ .compatible = "soc", }, { .compatible = "soc", },
{ .compatible = "simple-bus", }, { .compatible = "simple-bus", },
@ -64,7 +64,7 @@
{ .compatible = "gianfar", }, { .compatible = "gianfar", },
{ }, { },
}; };
@@ -372,4 +373,3 @@ @@ -372,4 +373,3 @@ static void fixup_rb604(struct pci_dev *
DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, fixup_pcibridge) DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, fixup_pcibridge)
DECLARE_PCI_FIXUP_HEADER(0x3388, 0x0021, fixup_rb604) DECLARE_PCI_FIXUP_HEADER(0x3388, 0x0021, fixup_rb604)

View file

@ -58,9 +58,9 @@
enet0: ethernet@25000 { enet0: ethernet@25000 {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <1>; #size-cells = <1>;
--- a/arch/powerpc/boot/rb600.c 2010-04-01 07:46:37.000000000 +0300 --- a/arch/powerpc/boot/rb600.c
+++ b/arch/powerpc/boot/rb600.c 2010-04-01 08:04:03.000000000 +0300 +++ b/arch/powerpc/boot/rb600.c
@@ -45,14 +45,6 @@ @@ -45,14 +45,6 @@ static void rb600_fixups(void)
clock = fdt_getprop(fw_dtb, node, "clock-frequency", &size); clock = fdt_getprop(fw_dtb, node, "clock-frequency", &size);
dt_fixup_cpu_clocks(*clock, *timebase, 0); dt_fixup_cpu_clocks(*clock, *timebase, 0);
@ -75,9 +75,9 @@
} }
void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
--- a/arch/powerpc/platforms/83xx/rbppc.c 2010-04-01 09:04:09.000000000 +0300 --- a/arch/powerpc/platforms/83xx/rbppc.c
+++ b/arch/powerpc/platforms/83xx/rbppc.c 2010-04-01 09:02:00.000000000 +0300 +++ b/arch/powerpc/platforms/83xx/rbppc.c
@@ -56,6 +56,8 @@ @@ -56,6 +56,8 @@ static void *gtm;
static int beeper_irq; static int beeper_irq;
static unsigned beeper_gpio_pin[2]; static unsigned beeper_gpio_pin[2];
@ -86,7 +86,7 @@
irqreturn_t rbppc_timer_irq(int irq, void *ptr) irqreturn_t rbppc_timer_irq(int irq, void *ptr)
{ {
static int toggle = 0; static int toggle = 0;
@@ -120,6 +122,8 @@ @@ -120,6 +122,8 @@ static void __init rbppc_setup_arch(void
} }
#endif #endif
@ -95,7 +95,7 @@
#ifdef CONFIG_QUICC_ENGINE #ifdef CONFIG_QUICC_ENGINE
qe_reset(); qe_reset();
@@ -132,6 +136,8 @@ @@ -132,6 +136,8 @@ static void __init rbppc_setup_arch(void
} }
#endif #endif
@ -104,7 +104,7 @@
} }
void __init rbppc_init_IRQ(void) void __init rbppc_init_IRQ(void)
@@ -145,6 +151,8 @@ @@ -145,6 +151,8 @@ void __init rbppc_init_IRQ(void)
of_node_put(np); of_node_put(np);
} }
@ -113,7 +113,7 @@
#ifdef CONFIG_QUICC_ENGINE #ifdef CONFIG_QUICC_ENGINE
np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic"); np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
if (!np) { if (!np) {
@@ -156,6 +164,8 @@ @@ -156,6 +164,8 @@ void __init rbppc_init_IRQ(void)
of_node_put(np); of_node_put(np);
#endif /* CONFIG_QUICC_ENGINE */ #endif /* CONFIG_QUICC_ENGINE */
@ -122,7 +122,7 @@
} }
static int __init rbppc_probe(void) static int __init rbppc_probe(void)
@@ -167,8 +177,10 @@ @@ -167,8 +177,10 @@ static int __init rbppc_probe(void)
if (!model) if (!model)
return 0; return 0;

View file

@ -1,4 +1,4 @@
--- a/drivers/misc/ucc_tdm.h --- /dev/null
+++ b/drivers/misc/ucc_tdm.h +++ b/drivers/misc/ucc_tdm.h
@@ -0,0 +1,221 @@ @@ -0,0 +1,221 @@
+/* +/*
@ -1242,9 +1242,9 @@
+MODULE_AUTHOR("Freescale Semiconductor, Inc"); +MODULE_AUTHOR("Freescale Semiconductor, Inc");
+MODULE_DESCRIPTION(DRV_DESC); +MODULE_DESCRIPTION(DRV_DESC);
+MODULE_LICENSE("GPL"); +MODULE_LICENSE("GPL");
--- a/drivers/misc/Makefile 2010-03-15 18:09:39.000000000 +0200 --- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile 2010-03-30 18:37:12.000000000 +0300 +++ b/drivers/misc/Makefile
@@ -8,6 +8,7 @@ @@ -8,6 +8,7 @@ obj-$(CONFIG_AD525X_DPOT) += ad525x_dpot
obj-$(CONFIG_ATMEL_PWM) += atmel_pwm.o obj-$(CONFIG_ATMEL_PWM) += atmel_pwm.o
obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o
obj-$(CONFIG_ATMEL_TCLIB) += atmel_tclib.o obj-$(CONFIG_ATMEL_TCLIB) += atmel_tclib.o
@ -1252,9 +1252,9 @@
obj-$(CONFIG_ICS932S401) += ics932s401.o obj-$(CONFIG_ICS932S401) += ics932s401.o
obj-$(CONFIG_LKDTM) += lkdtm.o obj-$(CONFIG_LKDTM) += lkdtm.o
obj-$(CONFIG_TIFM_CORE) += tifm_core.o obj-$(CONFIG_TIFM_CORE) += tifm_core.o
--- a/drivers/misc/Kconfig 2010-03-15 18:09:39.000000000 +0200 --- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig 2010-03-30 18:40:46.000000000 +0300 +++ b/drivers/misc/Kconfig
@@ -164,6 +164,20 @@ @@ -164,6 +164,20 @@ config ATMEL_SSC
If unsure, say N. If unsure, say N.
@ -1275,9 +1275,9 @@
config ENCLOSURE_SERVICES config ENCLOSURE_SERVICES
tristate "Enclosure Services" tristate "Enclosure Services"
default n default n
--- a/arch/powerpc/include/asm/ucc_fast.h 2010-03-15 18:09:39.000000000 +0200 --- a/arch/powerpc/include/asm/ucc_fast.h
+++ b/arch/powerpc/include/asm/ucc_fast.h 2010-03-30 19:13:29.000000000 +0300 +++ b/arch/powerpc/include/asm/ucc_fast.h
@@ -150,6 +150,10 @@ @@ -150,6 +150,10 @@ struct ucc_fast_info {
enum ucc_fast_rx_decoding_method renc; enum ucc_fast_rx_decoding_method renc;
enum ucc_fast_transparent_tcrc tcrc; enum ucc_fast_transparent_tcrc tcrc;
enum ucc_fast_sync_len synl; enum ucc_fast_sync_len synl;
@ -1288,9 +1288,9 @@
}; };
struct ucc_fast_private { struct ucc_fast_private {
--- a/arch/powerpc/include/asm/qe.h 2010-03-15 18:09:39.000000000 +0200 --- a/arch/powerpc/include/asm/qe.h
+++ b/arch/powerpc/include/asm/qe.h 2010-03-30 19:17:33.000000000 +0300 +++ b/arch/powerpc/include/asm/qe.h
@@ -669,6 +669,14 @@ @@ -669,6 +669,14 @@ struct ucc_slow_pram {
#define UCC_GETH_UCCE_RXF1 0x00000002 #define UCC_GETH_UCCE_RXF1 0x00000002
#define UCC_GETH_UCCE_RXF0 0x00000001 #define UCC_GETH_UCCE_RXF0 0x00000001

View file

@ -1,6 +1,6 @@
--- a/drivers/net/gianfar.c --- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c
@@ -908,6 +908,14 @@ @@ -908,6 +908,14 @@ static int gfar_probe(struct of_device *
udelay(2); udelay(2);
tempval = (MACCFG1_TX_FLOW | MACCFG1_RX_FLOW); tempval = (MACCFG1_TX_FLOW | MACCFG1_RX_FLOW);

View file

@ -7,7 +7,7 @@
+extern char __image_cmdline[]; +extern char __image_cmdline[];
void __init prom_setup_cmdline(void) void __init prom_setup_cmdline(void)
{ {
static char cmd_line[CL_SIZE] __initdata; static char cmd_line[COMMAND_LINE_SIZE] __initdata;
@@ -109,6 +110,9 @@ void __init prom_setup_cmdline(void) @@ -109,6 +110,9 @@ void __init prom_setup_cmdline(void)
} }
*(cp++) = ' '; *(cp++) = ' ';

View file

@ -25,8 +25,6 @@ Cc: user-mode-linux-devel@lists.sourceforge.net
arch/um/kernel/uml.lds.S | 2 +- arch/um/kernel/uml.lds.S | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-) 1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/um/kernel/uml.lds.S b/arch/um/kernel/uml.lds.S
index e7a6cca..664f942 100644
--- a/arch/um/kernel/uml.lds.S --- a/arch/um/kernel/uml.lds.S
+++ b/arch/um/kernel/uml.lds.S +++ b/arch/um/kernel/uml.lds.S
@@ -22,7 +22,7 @@ SECTIONS @@ -22,7 +22,7 @@ SECTIONS

View file

@ -3,7 +3,7 @@ or as a module
--- a/lib/Kconfig --- a/lib/Kconfig
+++ b/lib/Kconfig +++ b/lib/Kconfig
@@ -92,7 +92,7 @@ config ZLIB_INFLATE @@ -95,7 +95,7 @@ config ZLIB_INFLATE
tristate tristate
config ZLIB_DEFLATE config ZLIB_DEFLATE