D-Link DAP-1350 initial support

The initial support for the D-Link DAP-1350.
USB related functionality is not tested.

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 32821

target/linux/ramips/base-files/etc/diag.sh

@@ -39,6 +39,9 @@ get_status_led() {
 	dir-300-b1 | dir-600-b1 | dir-600-b2)
 		status_led="d-link:green:status"
 		;;
+	dap-1350)
+		status_led="d-link:blue:power"
+		;;
 	esr-9753)
 		status_led="esr-9753:orange:power"
 		;;

target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom

@@ -38,6 +38,10 @@ case "$FIRMWARE" in
 		rt2x00_eeprom_extract "devdata" 16384 272
 		;;
 
+	dap-1350)
+		rt2x00_eeprom_extract "devdata" 0 272
+		;;
+
 	rt-n10-plus | \
 	rt-g32-b1)
 		rt2x00_eeprom_extract "devconf" 0 272

target/linux/ramips/base-files/lib/preinit/06_set_iface_mac

@@ -29,6 +29,10 @@ preinit_set_mac_address() {
                 mac=$(ramips_get_mac_binary devdata 16388)
                 ifconfig eth0 hw ether $mac 2>/dev/null
                 ;;
+	dap-1350)
+		mac=$(ramips_get_mac_binary devdata 46)
+		ifconfig eth0 hw ether $mac 2>/dev/null
+                ;;
 	all0256n |\
 	all5002 | \
 	fonera20n |\

target/linux/ramips/base-files/lib/ramips.sh

@@ -80,6 +80,9 @@ ramips_board_name() {
 	*"DIR-600 B2")
 		name="dir-600-b2"
 		;;
+        *"DAP-1350")
+                name="dap-1350"
+                ;;
 	*"ESR-9753")
 		name="esr-9753"
 		;;

target/linux/ramips/base-files/lib/upgrade/platform.sh

@@ -21,6 +21,7 @@ platform_check_image() {
 	dir-300-b1 | \
 	dir-600-b1 | \
 	dir-600-b2 | \
+	dap-1350 | \
 	esr-9753 | \
 	fonera20n | \
 	freestation5 | \

target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h

@@ -36,6 +36,7 @@ enum ramips_mach_type {
 	/* RT3052 based machines */
 	RAMIPS_MACH_ARGUS_ATP52B,	/* Argus ATP-52B */
 	RAMIPS_MACH_BC2,		/* NexAira BC2 */
+	RAMIPS_MACH_DAP_1350,		/* D-Link DAP-1350 */
 	RAMIPS_MACH_ESR_9753,		/* Senao / EnGenius ESR-9753*/
 	RAMIPS_MACH_F5D8235_V2,         /* Belkin F5D8235 v2 */
 	RAMIPS_MACH_FONERA20N,		/* La Fonera 2.0N */

target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig

@@ -71,6 +71,11 @@ config RT305X_MACH_DIR_300_REVB
 	select RALINK_DEV_GPIO_BUTTONS
 	select RALINK_DEV_GPIO_LEDS
 
+config RT305X_MACH_DAP_1350
+	bool "D-Link DAP-1350 board support"
+	select RALINK_DEV_GPIO_BUTTONS
+	select RALINK_DEV_GPIO_LEDS
+
 config RT305X_MACH_ESR_9753
 	bool "EnGenius ESR-9753 support"
 	select RALINK_DEV_GPIO_BUTTONS

target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile

@@ -17,6 +17,7 @@ obj-$(CONFIG_RT305X_MACH_BC2)		+= mach-bc2.o
 obj-$(CONFIG_RT305X_MACH_ALL0256N)	+= mach-all0256n.o
 obj-$(CONFIG_RT305X_MACH_ALL5002)	+= mach-all5002.o
 obj-$(CONFIG_RT305X_MACH_DIR_300_REVB)	+= mach-dir-300-revb.o
+obj-$(CONFIG_RT305X_MACH_DAP_1350)	+= mach-dap-1350.o
 obj-$(CONFIG_RT305X_MACH_ESR_9753)	+= mach-esr-9753.o
 obj-$(CONFIG_RT305X_MACH_F5D8235_V2)    += mach-f5d8235-v2.o
 obj-$(CONFIG_RT305X_MACH_FONERA20N)	+= mach-fonera20n.o

target/linux/ramips/files/arch/mips/ralink/rt305x/mach-dap-1350.c

@@ -0,0 +1,94 @@
+/*
+ *  D-Link DAP-1350 board support
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ralink/machine.h>
+#include <asm/mach-ralink/dev-gpio-buttons.h>
+#include <asm/mach-ralink/dev-gpio-leds.h>
+#include <asm/mach-ralink/rt305x.h>
+#include <asm/mach-ralink/rt305x_regs.h>
+
+#include "devices.h"
+
+#define DAP_1350_GPIO_LED_POWER_BLUE	8
+#define DAP_1350_GPIO_LED_POWER_RED	9
+#define DAP_1350_GPIO_LED_WPS		14
+
+#define DAP_1350_GPIO_BUTTON_WPS	0	/* active low */
+#define DAP_1350_GPIO_BUTTON_RESET	10	/* active low */
+#define DAP_1350_GPIO_SWITCH_MODE_AP	7	/* active low */
+#define DAP_1350_GPIO_SWITCH_MODE_RT	11	/* active low */
+
+#define DAP_1350_KEYS_POLL_INTERVAL	20
+#define DAP_1350_KEYS_DEBOUNCE_INTERVAL	(3 * DAP_1350_KEYS_POLL_INTERVAL)
+
+static struct gpio_led dap_1350_leds_gpio[] __initdata = {
+	{
+		.name		= "d-link:blue:power",
+		.gpio		= DAP_1350_GPIO_LED_POWER_BLUE,
+		.active_low	= 1,
+	}, {
+		.name		= "d-link:red:power",
+		.gpio		= DAP_1350_GPIO_LED_POWER_RED,
+		.active_low	= 1,
+	}, {
+		.name		= "d-link:blue:wps",
+		.gpio		= DAP_1350_GPIO_LED_WPS,
+		.active_low	= 1,
+	}
+};
+
+static struct gpio_keys_button dap_1350_gpio_buttons[] __initdata = {
+	{
+		.desc		= "reset",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.debounce_interval = DAP_1350_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= DAP_1350_GPIO_BUTTON_RESET,
+		.active_low	= 1,
+	}, {
+		.desc		= "wps",
+		.type		= EV_KEY,
+		.code		= KEY_WPS_BUTTON,
+		.debounce_interval = DAP_1350_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= DAP_1350_GPIO_BUTTON_WPS,
+		.active_low	= 1,
+	}, {
+		.desc		= "rt",
+		.type		= EV_KEY,
+		.code		= BTN_0,
+		.debounce_interval = DAP_1350_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= DAP_1350_GPIO_SWITCH_MODE_RT,
+		.active_low	= 1,
+	}, {
+		.desc		= "ap",
+		.type		= EV_KEY,
+		.code		= BTN_1,
+		.debounce_interval = DAP_1350_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= DAP_1350_GPIO_SWITCH_MODE_AP,
+		.active_low	= 1,
+	}
+};
+
+static void __init dap_1350_init(void)
+{
+	rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
+
+	rt305x_register_flash(0);
+
+	rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL;
+	rt305x_register_ethernet();
+	ramips_register_gpio_leds(-1, ARRAY_SIZE(dap_1350_leds_gpio),
+				  dap_1350_leds_gpio);
+	ramips_register_gpio_buttons(-1, DAP_1350_KEYS_POLL_INTERVAL,
+				     ARRAY_SIZE(dap_1350_gpio_buttons),
+				     dap_1350_gpio_buttons);
+	rt305x_register_wifi();
+	rt305x_register_wdt();
+}
+
+MIPS_MACHINE(RAMIPS_MACH_DAP_1350, "DAP-1350", "D-Link DAP-1350",
+	     dap_1350_init);

target/linux/ramips/image/Makefile

@@ -182,6 +182,20 @@ define BuildFirmware/DIR300B1/initramfs
 	$(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),ttyS1,57600) $(call mkmtd/phys,$(mtdlayout_dir300b1)),$(mtd_dir300b1_kernel_part_size),$(mtd_dir300b1_rootfs_part_size))
 endef
 
+mtdlayout_dap1350=192k(u-boot)ro,64k(devdata)ro,192k(devconf)ro,256k(devlang)ro,1088k(kernel),6400k(rootfs),7488k@0xb0000(firmware)
+mtd_dap1350_kernel_part_size=1114112
+mtd_dap1350_rootfs_part_size=6553600
+define BuildFirmware/DAP1350
+	$(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),ttyS1,115200) $(call mkmtd/phys,$(mtdlayout_dap1350)),$(mtd_dap1350_kernel_part_size),$(mtd_dap1350_rootfs_part_size))
+	mkdapimg -s $(4) \
+		-i $(call sysupname,$(1),$(2)) \
+		-o $(call imgname,$(1),$(2))-factory.bin
+endef
+
+define BuildFirmware/DAP1350/initramfs
+	$(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),ttyS1,115200) $(call mkmtd/phys,$(mtdlayout_dap1350)),$(mtd_dap1350_kernel_part_size),$(mtd_dap1350_rootfs_part_size))
+endef
+
 define BuildFirmware/Edimax
 	if [ -e "$(call sysupname,$(1),$(2))" ]; then \
 		mkedimaximg -i $(call sysupname,$(1),$(2)) \
@@ -353,6 +367,10 @@ define Image/Build/Profile/DIR300B1
 	$(call Image/Build/Template/$(fs_squash)/$(1),DIR300B1,dir-615-d,DIR-615-D,wrgn23_dlwbr_dir615d)
 endef
 
+define Image/Build/Profile/DAP1350
+	$(call Image/Build/Template/$(fs_squash)/$(1),DAP1350,dap-1350,DAP-1350,RT3052-AP-DAP1350-3)
+endef
+
 define Image/Build/Profile/ESR9753
 	$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,esr-9753,ESR-9753,ttyS1,57600,phys)
 endef
@@ -472,6 +490,7 @@ define Image/Build/Profile/Default
 	$(call Image/Build/Profile/ARGUS_ATP52B,$(1))
 	$(call Image/Build/Profile/BC2,$(1))
 	$(call Image/Build/Profile/DIR300B1,$(1))
+	$(call Image/Build/Profile/DAP1350,$(1))
 	$(call Image/Build/Profile/ESR9753,$(1))
 	$(call Image/Build/Profile/F5D8235V2,$(1))
 	$(call Image/Build/Profile/RTN10PLUS,$(1))

target/linux/ramips/rt305x/config-3.3

@@ -93,6 +93,7 @@ CONFIG_RT305X_MACH_ALL5002=y
 CONFIG_RT305X_MACH_ARGUS_ATP52B=y
 CONFIG_RT305X_MACH_BC2=y
 CONFIG_RT305X_MACH_DIR_300_REVB=y
+CONFIG_RT305X_MACH_DAP_1350=y
 CONFIG_RT305X_MACH_ESR_9753=y
 CONFIG_RT305X_MACH_F5D8235_V2=y
 CONFIG_RT305X_MACH_FONERA20N=y