linux: add support of Synopsys ARCHS38-based boards

This patch introduces support of new boards with ARC HS38 cores.

ARC HS38 is a new generation of ARC cores which utilize ARCv2 ISA.
As with ARC770 we're addind support for 2 boards for now:

 [1] Synopsys SDP board (AXS103)
     This is the same base-board as in AXS101 but with
     FPGA-based CPU-tile where ARCHs38 core is implemented.

 [2] nSIM
     Again this is the same simulation engine but configured for
     new instruction set and features of new CPU.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: Jo-Philipp Wich <jow@openwrt.org>
Cc: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 48740
This commit is contained in:
John Crispin 2016-02-18 08:22:32 +00:00
parent 7b821a5ae8
commit 73015c4cb3
18 changed files with 888 additions and 0 deletions

View file

@ -265,6 +265,7 @@ ifeq ($(DUMP),1)
CPU_TYPE ?= arc700 CPU_TYPE ?= arc700
CPU_CFLAGS += -matomic CPU_CFLAGS += -matomic
CPU_CFLAGS_arc700 = -marc700 CPU_CFLAGS_arc700 = -marc700
CPU_CFLAGS_archs = -marchs
endif endif
DEFAULT_CFLAGS=$(strip $(CPU_CFLAGS) $(CPU_CFLAGS_$(CPU_TYPE)) $(CPU_CFLAGS_$(CPU_SUBTYPE))) DEFAULT_CFLAGS=$(strip $(CPU_CFLAGS) $(CPU_CFLAGS_$(CPU_TYPE)) $(CPU_CFLAGS_$(CPU_SUBTYPE)))
endif endif

View file

@ -0,0 +1,26 @@
#
# Copyright (C) 2016 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
ARCH:=arc
CPU_TYPE:=archs
BOARD:=archs38
BOARDNAME:=Synopsys DesignWare ARC HS38
MAINTAINER:=Alexey Brodkin <abrodkin@synopsys.com>
SUBTARGETS:=generic
KERNEL_PATCHVER:=4.4
DEVICE_TYPE:=developerboard
include $(INCLUDE_DIR)/target.mk
define Target/Description
Synopsys DesignWare boards
endef
$(eval $(call BuildTarget))

View file

@ -0,0 +1,3 @@
define Package/base-files/install-target
rm -f $(1)/etc/config/network
endef

View file

@ -0,0 +1,19 @@
#!/bin/sh
#
# Copyright (C) 2016 OpenWrt.org
#
. /lib/arc.sh
. /lib/functions/uci-defaults.sh
board_config_update
case "$( arc_board_name )" in
"arc-sdp"*)
ucidef_set_interface_lan "eth0" "dhcp"
;;
esac
board_config_flush
exit 0

View file

@ -0,0 +1,50 @@
#!/bin/sh
#
# Copyright (C) 2016 OpenWrt.org
#
# defaults
ARC_BOARD_NAME="generic"
ARC_BOARD_MODEL="Generic ARC board"
arc_board_detect() {
local board
local model
local compatible
[ -e "/tmp/sysinfo/" ] || mkdir -p "/tmp/sysinfo/"
model="$( cat /proc/device-tree/model )"
compatible="$( cat /proc/device-tree/compatible )"
case "$compatible" in
"snps,axs103""snps,arc-sdp")
board="arc-sdp";
;;
"snps,nsim_hs")
board="arc-nsim";
;;
esac
if [ "$board" != "" ]; then
ARC_BOARD_NAME="$board"
fi
if [ "$model" != "" ]; then
ARC_BOARD_MODEL="$model"
fi
echo "$ARC_BOARD_NAME" > /tmp/sysinfo/board_name
echo "$ARC_BOARD_MODEL" > /tmp/sysinfo/model
echo "Detected $ARC_BOARD_NAME // $ARC_BOARD_MODEL"
}
arc_board_name() {
local name
[ -f /tmp/sysinfo/board_name ] && name="$(cat /tmp/sysinfo/board_name)"
[ -z "$name" ] && name="unknown"
echo "$name"
}

View file

@ -0,0 +1,9 @@
#!/bin/sh
do_arc() {
. /lib/arc.sh
arc_board_detect
}
boot_hook_add preinit_main do_arc

View file

@ -0,0 +1,183 @@
# CONFIG_16KSTACKS is not set
CONFIG_ARC=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
# CONFIG_ARCH_HAS_SG_CHAIN is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_ARC_BUILTIN_DTB_NAME=""
CONFIG_ARC_CACHE=y
CONFIG_ARC_CACHE_LINE_SHIFT=6
CONFIG_ARC_CACHE_PAGES=y
# CONFIG_ARC_CANT_LLSC is not set
CONFIG_ARC_CPU_HS=y
CONFIG_ARC_CURR_IN_REG=y
CONFIG_ARC_DBG=y
# CONFIG_ARC_DBG_TLB_MISS_COUNT is not set
# CONFIG_ARC_DBG_TLB_PARANOIA is not set
CONFIG_ARC_DW2_UNWIND=y
CONFIG_ARC_HAS_COH_CACHES=y
CONFIG_ARC_HAS_DCACHE=y
# CONFIG_ARC_HAS_DCCM is not set
CONFIG_ARC_HAS_DIV_REM=y
CONFIG_ARC_HAS_GRTC=y
CONFIG_ARC_HAS_HW_MPY=y
CONFIG_ARC_HAS_ICACHE=y
# CONFIG_ARC_HAS_ICCM is not set
CONFIG_ARC_HAS_LL64=y
CONFIG_ARC_HAS_LLSC=y
# CONFIG_ARC_HAS_PAE40 is not set
# CONFIG_ARC_HAS_REENTRANT_IRQ_LV2 is not set
CONFIG_ARC_HAS_SWAPE=y
# CONFIG_ARC_IPI_DBG is not set
CONFIG_ARC_MCIP=y
# CONFIG_ARC_METAWARE_HLINK is not set
CONFIG_ARC_MMU_V4=y
CONFIG_ARC_NUMBER_OF_INTERRUPTS=32
# CONFIG_ARC_PAGE_SIZE_16K is not set
# CONFIG_ARC_PAGE_SIZE_4K is not set
CONFIG_ARC_PAGE_SIZE_8K=y
CONFIG_ARC_PLAT_AXS10X=y
CONFIG_ARC_PLAT_SIM=y
# CONFIG_ARC_PLAT_TB10X is not set
# CONFIG_ARC_SMP_HALT_ON_RESET is not set
CONFIG_ARC_STAR_9000923308=y
# CONFIG_ARC_UBOOT_SUPPORT is not set
CONFIG_AXS103=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_COMMON_CLK=y
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_RMAP=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_DTC=y
CONFIG_DWMAC_GENERIC=y
# CONFIG_DWMAC_SUNXI is not set
CONFIG_DW_APB_ICTL=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CSUM=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_IO=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
# CONFIG_GEN_RTC is not set
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIO_DWAPB=y
CONFIG_GPIO_GENERIC=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_FUTEX_CMPXCHG=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HZ_PERIODIC=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IRQCHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_WORK=y
# CONFIG_ISA_ARCOMPACT is not set
CONFIG_ISA_ARCV2=y
CONFIG_KALLSYMS=y
CONFIG_LIBFDT=y
CONFIG_LINUX_LINK_BASE=0x80000000
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_MDIO_BOARDINFO=y
CONFIG_MFD_SYSCON=y
CONFIG_MMC=y
CONFIG_MMC_DW=y
# CONFIG_MMC_DW_EXYNOS is not set
# CONFIG_MMC_DW_K3 is not set
CONFIG_MMC_DW_PLTFM=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_NATIONAL_PHY=y
# CONFIG_NET_CADENCE is not set
CONFIG_NET_FLOW_LIMIT=y
CONFIG_NET_PTP_CLASSIFY=y
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_QUALCOMM is not set
# CONFIG_NET_VENDOR_ROCKER is not set
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_NO_BOOTMEM=y
CONFIG_NO_IOPORT_MAP=y
CONFIG_NR_CPUS=4
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_GPIO=y
CONFIG_OF_IRQ=y
CONFIG_OF_MDIO=y
CONFIG_OF_MTD=y
CONFIG_OF_NET=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
CONFIG_PPS=y
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_RCU=y
CONFIG_PTP_1588_CLOCK=y
CONFIG_RATIONAL=y
# CONFIG_RCU_BOOST is not set
CONFIG_RCU_STALL_COMMON=y
CONFIG_REGMAP=y
CONFIG_REGMAP_MMIO=y
CONFIG_RESET_CONTROLLER=y
CONFIG_RFS_ACCEL=y
CONFIG_RPS=y
# CONFIG_RTC is not set
# CONFIG_SCHED_INFO is not set
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_DW=y
# CONFIG_SERIAL_8250_FSL is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_ARC=y
CONFIG_SERIAL_ARC_CONSOLE=y
CONFIG_SERIAL_ARC_NR_PORTS=1
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SMP=y
CONFIG_SRCU=y
CONFIG_STACKTRACE=y
CONFIG_STMMAC_ETH=y
CONFIG_STMMAC_PLATFORM=y
# CONFIG_SUNXI_SRAM is not set
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_USB_SUPPORT=y
CONFIG_XPS=y
CONFIG_ZONE_DMA_FLAG=0

View file

@ -0,0 +1,126 @@
/*
* Copyright (C) 2014, 2015 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/*
* Device tree for AXC003 CPU card: HS38x2 (Dual Core) with IDU intc
*/
/ {
compatible = "snps,arc";
clock-frequency = <90000000>;
#address-cells = <1>;
#size-cells = <1>;
cpu_card {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0xf0000000 0x10000000>;
cpu_intc: archs-intc@cpu {
compatible = "snps,archs-intc";
interrupt-controller;
#interrupt-cells = <1>;
};
idu_intc: idu-interrupt-controller {
compatible = "snps,archs-idu-intc";
interrupt-controller;
interrupt-parent = <&cpu_intc>;
/*
* <hwirq distribution>
* distribution: 0=RR; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3
*/
#interrupt-cells = <2>;
/*
* upstream irqs to core intc - downstream these are
* "COMMON" irq 0,1..
*/
interrupts = <24 25>;
};
/*
* this GPIO block ORs all interrupts on CPU card (creg,..)
* to uplink only 1 IRQ to ARC core intc
*/
dw-apb-gpio@0x2000 {
compatible = "snps,dw-apb-gpio";
reg = < 0x2000 0x80 >;
#address-cells = <1>;
#size-cells = <0>;
ictl_intc: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <30>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&idu_intc>;
/*
* cmn irq 1 -> cpu irq 25
* Distribute to cpu0 only
*/
interrupts = <1 1>;
};
};
debug_uart: dw-apb-uart@0x5000 {
compatible = "snps,dw-apb-uart";
reg = <0x5000 0x100>;
clock-frequency = <33333000>;
interrupt-parent = <&ictl_intc>;
interrupts = <2 4>;
baud = <115200>;
reg-shift = <2>;
reg-io-width = <4>;
};
arcpct0: pct {
compatible = "snps,archs-pct";
#interrupt-cells = <1>;
interrupt-parent = <&cpu_intc>;
interrupts = <20>;
};
};
/*
* This INTC is actually connected to DW APB GPIO
* which acts as a wire between MB INTC and CPU INTC.
* GPIO INTC is configured in platform init code
* and here we mimic direct connection from MB INTC to
* CPU INTC, thus we set "interrupts = <0 1>" instead of
* "interrupts = <12>"
*
* This intc actually resides on MB, but we move it here to
* avoid duplicating the MB dtsi file given that IRQ from
* this intc to cpu intc are different for axs101 and axs103
*/
mb_intc: dw-apb-ictl@0xe0012000 {
#interrupt-cells = <1>;
compatible = "snps,dw-apb-ictl";
reg = < 0xe0012000 0x200 >;
interrupt-controller;
interrupt-parent = <&idu_intc>;
interrupts = <0 1>; /* cmn irq 0 -> cpu irq 24
distribute to cpu0 only */
};
memory {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x80000000 0x40000000>;
device_type = "memory";
reg = <0x80000000 0x20000000>; /* 512MiB */
};
};

View file

@ -0,0 +1,25 @@
/*
* Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/*
* Device Tree for AXS103 SDP with AXS10X Main Board and
* AXC003 FPGA Card (with SMP bitfile)
*/
/dts-v1/;
/include/ "axc003_idu.dtsi"
/include/ "axs10x_mb.dtsi"
/ {
model = "Synopsys AXS103 Development Board";
compatible = "snps,axs103", "snps,arc-sdp";
chosen {
bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=ttyS3,115200n8";
};
};

View file

@ -0,0 +1,225 @@
/*
* Support for peripherals on the AXS10x mainboard
*
* Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/ {
axs10x_mb {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0xe0000000 0x10000000>;
interrupt-parent = <&mb_intc>;
clocks {
i2cclk: i2cclk {
compatible = "fixed-clock";
clock-frequency = <50000000>;
#clock-cells = <0>;
};
apbclk: apbclk {
compatible = "fixed-clock";
clock-frequency = <50000000>;
#clock-cells = <0>;
};
mmcclk: mmcclk {
compatible = "fixed-clock";
clock-frequency = <50000000>;
#clock-cells = <0>;
};
};
ethernet@0x18000 {
#interrupt-cells = <1>;
compatible = "snps,dwmac";
reg = < 0x18000 0x2000 >;
interrupts = < 4 >;
interrupt-names = "macirq";
phy-mode = "rgmii";
snps,pbl = < 32 >;
clocks = <&apbclk>;
clock-names = "stmmaceth";
max-speed = <100>;
};
ehci@0x40000 {
compatible = "generic-ehci";
reg = < 0x40000 0x100 >;
interrupts = < 8 >;
};
ohci@0x60000 {
compatible = "generic-ohci";
reg = < 0x60000 0x100 >;
interrupts = < 8 >;
};
/*
* According to DW Mobile Storage databook it is required
* to use "Hold Register" if card is enumerated in SDR12 or
* SDR25 modes.
*
* Utilization of "Hold Register" is already implemented via
* dw_mci_pltfm_prepare_command() which in its turn gets
* used through dw_mci_drv_data->prepare_command call-back.
* This call-back is used in Altera Socfpga platform and so
* we may reuse it saying that we're compatible with their
* "altr,socfpga-dw-mshc".
*
* Most probably "Hold Register" utilization is platform-
* independent requirement which means that single unified
* "snps,dw-mshc" should be enough for all users of DW MMC once
* dw_mci_pltfm_prepare_command() is used in generic platform
* code.
*/
mmc@0x15000 {
compatible = "altr,socfpga-dw-mshc";
reg = < 0x15000 0x400 >;
num-slots = < 1 >;
fifo-depth = < 16 >;
card-detect-delay = < 200 >;
clocks = <&apbclk>, <&mmcclk>;
clock-names = "biu", "ciu";
interrupts = < 7 >;
bus-width = < 4 >;
};
uart@0x20000 {
compatible = "snps,dw-apb-uart";
reg = <0x20000 0x100>;
clock-frequency = <33333333>;
interrupts = <17>;
baud = <115200>;
reg-shift = <2>;
reg-io-width = <4>;
};
uart@0x21000 {
compatible = "snps,dw-apb-uart";
reg = <0x21000 0x100>;
clock-frequency = <33333333>;
interrupts = <18>;
baud = <115200>;
reg-shift = <2>;
reg-io-width = <4>;
};
/* UART muxed with USB data port (ttyS3) */
uart@0x22000 {
compatible = "snps,dw-apb-uart";
reg = <0x22000 0x100>;
clock-frequency = <33333333>;
interrupts = <19>;
baud = <115200>;
reg-shift = <2>;
reg-io-width = <4>;
};
i2c@0x1d000 {
compatible = "snps,designware-i2c";
reg = <0x1d000 0x100>;
clock-frequency = <400000>;
clocks = <&i2cclk>;
interrupts = <14>;
};
i2c@0x1e000 {
compatible = "snps,designware-i2c";
reg = <0x1e000 0x100>;
clock-frequency = <400000>;
clocks = <&i2cclk>;
interrupts = <15>;
};
i2c@0x1f000 {
compatible = "snps,designware-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x1f000 0x100>;
clock-frequency = <400000>;
clocks = <&i2cclk>;
interrupts = <16>;
eeprom@0x54{
compatible = "24c01";
reg = <0x54>;
pagesize = <0x8>;
};
eeprom@0x57{
compatible = "24c04";
reg = <0x57>;
pagesize = <0x8>;
};
};
gpio0:gpio@13000 {
compatible = "snps,dw-apb-gpio";
reg = <0x13000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
gpio0_banka: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <32>;
reg = <0>;
};
gpio0_bankb: gpio-controller@1 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <8>;
reg = <1>;
};
gpio0_bankc: gpio-controller@2 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <8>;
reg = <2>;
};
};
gpio1:gpio@14000 {
compatible = "snps,dw-apb-gpio";
reg = <0x14000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
gpio1_banka: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <30>;
reg = <0>;
};
gpio1_bankb: gpio-controller@1 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <10>;
reg = <1>;
};
gpio1_bankc: gpio-controller@2 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <8>;
reg = <2>;
};
};
};
};

View file

@ -0,0 +1,73 @@
/*
* Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
/include/ "skeleton.dtsi"
/ {
model = "Synopsys ARC HS38 nSIM simulator";
compatible = "snps,nsim_hs";
interrupt-parent = <&core_intc>;
chosen {
bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8";
};
aliases {
serial0 = &arcuart0;
};
fpga {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
/* child and parent address space 1:1 mapped */
ranges;
core_intc: core-interrupt-controller {
compatible = "snps,archs-intc";
interrupt-controller;
#interrupt-cells = <1>;
};
idu_intc: idu-interrupt-controller {
compatible = "snps,archs-idu-intc";
interrupt-controller;
interrupt-parent = <&core_intc>;
/*
* <hwirq distribution>
* distribution: 0=RR; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3
*/
#interrupt-cells = <2>;
/*
* upstream irqs to core intc - downstream these are
* "COMMON" irq 0,1..
*/
interrupts = <24 25 26 27 28 29 30 31>;
};
arcuart0: serial@c0fc1000 {
compatible = "snps,arc-uart";
reg = <0xc0fc1000 0x100>;
interrupt-parent = <&idu_intc>;
interrupts = <0 0>;
clock-frequency = <80000000>;
current-speed = <115200>;
status = "okay";
};
arcpct0: pct {
compatible = "snps,archs-pct";
#interrupt-cells = <1>;
interrupts = <20>;
};
};
};

View file

@ -0,0 +1,37 @@
/*
* Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/*
* Skeleton device tree; the bare minimum needed to boot; just include and
* add a compatible value.
*/
/ {
compatible = "snps,arc";
clock-frequency = <80000000>; /* 80 MHZ */
#address-cells = <1>;
#size-cells = <1>;
chosen { };
aliases { };
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "snps,arc770d";
reg = <0>;
};
};
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256M */
};
};

View file

@ -0,0 +1,16 @@
#
# Copyright (C) 2016 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
define Profile/Default
NAME:=Default Profile (all drivers)
PACKAGES:= kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-mmc kmod-sdhci
endef
define Profile/Default/Description
Default package set compatible with most boards.
endef
$(eval $(call Profile,Default))

View file

@ -0,0 +1,15 @@
#
# Copyright (C) 2016 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
define Profile/Minimal
NAME:=Minimal Profile (no drivers)
endef
define Profile/Minimal/Description
Minimal package set compatible with most boards.
endef
$(eval $(call Profile,Minimal))

View file

@ -0,0 +1,16 @@
#
# Copyright (C) 2016 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
define Profile/axs103
NAME:=Synopsys DesignWare AXS103
PACKAGES:= kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-mmc kmod-sdhci
endef
define Profile/axs103/Description
Package set compatible with hardware using Synopsys DesignWare AXS103 boards.
endef
$(eval $(call Profile,axs103))

View file

@ -0,0 +1,15 @@
#
# Copyright (C) 2016 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
define Profile/nsim_hs
NAME:=Synopsys nSIM
endef
define Profile/nsim_hs/Description
Package set compatible with hardware using Synopsys nSIM HS boards.
endef
$(eval $(call Profile,nsim_hs))

View file

@ -0,0 +1,8 @@
BOARDNAME:=Generic
FEATURES += ramdisk usb
define Target/Description
Build firmware images for generic ARC HS38 based boards.
endef

View file

@ -0,0 +1,41 @@
#
# Copyright (C) 2016 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
define Build/patch-dtb
$(call Image/BuildDTB,../dts/$(DEVICE_DTS).dts,$@.dtb)
$(STAGING_DIR_HOST)/bin/patch-dtb $@ $@.dtb
endef
# Shared device definition: applies to every defined device
define Device/Default
PROFILES = Default $$(DEVICE_PROFILE)
KERNEL_DEPENDS = $$(wildcard ../dts/$$(DEVICE_DTS).dts)
KERNEL_SUFFIX := .elf
KERNEL_INITRAMFS := kernel-bin | patch-dtb
KERNEL_INITRAMFS_NAME = $$(KERNEL_NAME)-initramfs.elf
DEVICE_PROFILE :=
DEVICE_DTS :=
endef
DEVICE_VARS += DEVICE_PROFILE DEVICE_DTS
define add_archs38
define Device/$(1)
DEVICE_PROFILE := $(1)
DEVICE_DTS := $(1)
endef
TARGET_DEVICES += $(1)
endef
# DesignWare AXS103
$(eval $(call add_archs38,axs103_idu))
# nSIM with ARCHS38
$(eval $(call add_archs38,nsim_hs_idu))
$(eval $(call BuildImage))